Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (104 commits)
  [SCSI] fcoe: fix configuration problems
  [SCSI] cxgb3i: fix select/depend problem
  [SCSI] fcoe: fix incorrect use of struct module
  [SCSI] cxgb3i: remove use of skb->sp
  [SCSI] cxgb3i: Add cxgb3i iSCSI driver.
  [SCSI] zfcp: Remove unnecessary warning message
  [SCSI] zfcp: Add support for unchained FSF requests
  [SCSI] zfcp: Remove busid macro
  [SCSI] zfcp: remove DID_DID flag
  [SCSI] zfcp: Simplify mask lookups for incoming RSCNs
  [SCSI] zfcp: Remove initial device data from zfcp_data
  [SCSI] zfcp: fix compile warning
  [SCSI] zfcp: Remove adapter list
  [SCSI] zfcp: Simplify SBAL allocation to fix sparse warnings
  [SCSI] zfcp: register with SCSI layer on ccw registration
  [SCSI] zfcp: Fix message line break
  [SCSI] qla2xxx: changes in multiq code
  [SCSI] eata: fix the data buffer accessors conversion regression
  [SCSI] ibmvfc: Improve async event handling
  [SCSI] lpfc : correct printk types on PPC compiles
  ...

1 files changed, 124 insertions, 0 deletions

diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 000000000000..cff8a8c22f50
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED  __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+	__u8	ssb_seq_id;		/* sequence ID */
+	__u8	_ssb_resvd;
+	__be16	ssb_low_seq_cnt;	/* lowest SEQ_CNT */
+
+	__be16	ssb_high_seq_cnt;	/* highest SEQ_CNT */
+	__be16	ssb_s_stat;		/* sequence status flags */
+
+	__be16	ssb_err_seq_cnt;	/* error SEQ_CNT */
+	__u8	ssb_fh_cs_ctl;		/* frame header CS_CTL */
+	__be16	ssb_fh_ox_id;		/* frame header OX_ID */
+	__be16	ssb_rx_id;		/* responder's exchange ID */
+	__u8	_ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP         (1 << 15)   /* sequence responder */
+#define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
+#define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT     (0 << 10)
+#define SSB_ST_REQ_ABORT    (1 << 10)
+#define SSB_ST_REQ_STOP     (2 << 10)
+#define SSB_ST_REQ_RETRANS  (3 << 10)
+
+#define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
+#define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
+#define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
+#define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
+#define SSB_ST_CLASS_MASK   3           /* class of service mask */
+#define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+	__u8	esb_cs_ctl;		/* CS_CTL for frame header */
+	__be16	esb_ox_id;		/* originator exchange ID */
+	__be16	esb_rx_id;		/* responder exchange ID */
+	__be32	esb_orig_fid;		/* fabric ID of originator */
+	__be32	esb_resp_fid;		/* fabric ID of responder */
+	__be32	esb_e_stat;		/* status */
+	__u8	_esb_resvd[4];
+	__u8	esb_service_params[112]; /* TBD */
+	__u8	esb_seq_status[8];	/* sequence statuses, 8 bytes each */
+} __attribute__((packed));;
+
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
+#define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiaive */
+#define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
+#define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
+#define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
+#define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
+#define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
+#define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */