Merge tag 'mac80211-next-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
We have a reasonably large number of changes:
 * lots more HE (802.11ax) support, particularly things
   relevant for the the AP side, but also mesh support
 * debugfs cleanups from Greg
 * some more work on extended key ID
 * start using genl parallel_ops, as preparation for
   weaning ourselves off RTNL and getting parallelism
 * various other changes all over
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 59 insertions, 9 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 45850a8391d9..35ec1f0a2bf9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -247,6 +247,19 @@ struct ieee80211_rate {
 };
 
 /**
+ * struct ieee80211_he_obss_pd - AP settings for spatial reuse
+ *
+ * @enable: is the feature enabled.
+ * @min_offset: minimal tx power offset an associated station shall use
+ * @max_offset: maximum tx power offset an associated station shall use
+ */
+struct ieee80211_he_obss_pd {
+	bool enable;
+	u8 min_offset;
+	u8 max_offset;
+};
+
+/**
  * struct ieee80211_sta_ht_cap - STA's HT capabilities
  *
  * This structure describes most essential parameters needed
@@ -896,6 +909,7 @@ enum cfg80211_ap_settings_flags {
  * @vht_required: stations must support VHT
  * @twt_responder: Enable Target Wait Time
  * @flags: flags, as defined in enum cfg80211_ap_settings_flags
+ * @he_obss_pd: OBSS Packet Detection settings
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -923,6 +937,7 @@ struct cfg80211_ap_settings {
 	bool ht_required, vht_required;
 	bool twt_responder;
 	u32 flags;
+	struct ieee80211_he_obss_pd he_obss_pd;
 };
 
 /**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d26da013f7c0..6781d4637557 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -315,6 +315,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
  *	functionality changed for this BSS (AP mode).
  * @BSS_CHANGED_TWT: TWT status changed
+ * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
  *
  */
 enum ieee80211_bss_change {
@@ -346,6 +347,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_MCAST_RATE		= 1<<25,
 	BSS_CHANGED_FTM_RESPONDER	= 1<<26,
 	BSS_CHANGED_TWT			= 1<<27,
+	BSS_CHANGED_HE_OBSS_PD		= 1<<28,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -600,6 +602,8 @@ struct ieee80211_ftm_responder_params {
  *	nontransmitted BSSIDs
  * @profile_periodicity: the least number of beacon frames need to be received
  *	in order to discover all the nontransmitted BSSIDs in the set.
+ * @he_operation: HE operation information of the AP we are connected to
+ * @he_obss_pd: OBSS Packet Detection parameters.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -661,6 +665,8 @@ struct ieee80211_bss_conf {
 	u8 bssid_indicator;
 	bool ema_ap;
 	u8 profile_periodicity;
+	struct ieee80211_he_operation he_operation;
+	struct ieee80211_he_obss_pd he_obss_pd;
 };
 
 /**
@@ -1058,11 +1064,13 @@ struct ieee80211_tx_info {
  * @sta: Station that the packet was transmitted for
  * @info: Basic tx status information
  * @skb: Packet skb (can be NULL if not provided by the driver)
+ * @rate: The TX rate that was used when sending the packet
  */
 struct ieee80211_tx_status {
 	struct ieee80211_sta *sta;
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb;
+	struct rate_info *rate;
 };
 
 /**
@@ -1702,6 +1710,9 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
  *	a TKIP key if it only requires MIC space. Do not set together with
  *	@IEEE80211_KEY_FLAG_GENERATE_MMIC on the same key.
  * @IEEE80211_KEY_FLAG_NO_AUTO_TX: Key needs explicit Tx activation.
+ * @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver
+ *	for a AES_CMAC key to indicate that it requires sequence number
+ *	generation only
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_GENERATE_IV_MGMT	= BIT(0),
@@ -1714,6 +1725,7 @@ enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_RESERVE_TAILROOM	= BIT(7),
 	IEEE80211_KEY_FLAG_PUT_MIC_SPACE	= BIT(8),
 	IEEE80211_KEY_FLAG_NO_AUTO_TX		= BIT(9),
+	IEEE80211_KEY_FLAG_GENERATE_MMIE	= BIT(10),
 };
 
 /**
@@ -2268,11 +2280,9 @@ struct ieee80211_txq {
  * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID
  *	only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set.
  *
- * @IEEE80211_HW_EXT_KEY_ID_NATIVE: Driver and hardware are supporting Extended
- *	Key ID and can handle two unicast keys per station for Rx and Tx.
- *
- * @IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT: The card/driver can't handle
- *	active Tx A-MPDU sessions with Extended Key IDs during rekey.
+ * @IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT: The card and driver is only
+ *	aggregating MPDUs with the same keyid, allowing mac80211 to keep Tx
+ *	A-MPDU sessions active while rekeying with Extended Key ID.
  *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
@@ -2325,8 +2335,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN,
 	IEEE80211_HW_SUPPORTS_MULTI_BSSID,
 	IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID,
-	IEEE80211_HW_EXT_KEY_ID_NATIVE,
-	IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT,
+	IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -3914,7 +3923,8 @@ struct ieee80211_ops {
 				 struct ieee80211_channel *chan,
 				 int duration,
 				 enum ieee80211_roc_type type);
-	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
+	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif);
 	int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
 	void (*get_ringparam)(struct ieee80211_hw *hw,
 			      u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
@@ -5945,7 +5955,6 @@ struct rate_control_ops {
 
 	void (*add_sta_debugfs)(void *priv, void *priv_sta,
 				struct dentry *dir);
-	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
 
 	u32 (*get_expected_throughput)(void *priv_sta);
 };
@@ -6234,11 +6243,37 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
  * but for the duration of the frame handling.
  * However, also note that while in the wake_tx_queue() method,
  * rcu_read_lock() is already held.
+ *
+ * softirqs must also be disabled when this function is called.
+ * In process context, use ieee80211_tx_dequeue_ni() instead.
  */
 struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
 				     struct ieee80211_txq *txq);
 
 /**
+ * ieee80211_tx_dequeue_ni - dequeue a packet from a software tx queue
+ * (in process context)
+ *
+ * Like ieee80211_tx_dequeue() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface, or from
+ *	ieee80211_next_txq()
+ */
+static inline struct sk_buff *ieee80211_tx_dequeue_ni(struct ieee80211_hw *hw,
+						      struct ieee80211_txq *txq)
+{
+	struct sk_buff *skb;
+
+	local_bh_disable();
+	skb = ieee80211_tx_dequeue(hw, txq);
+	local_bh_enable();
+
+	return skb;
+}
+
+/**
  * ieee80211_next_txq - get next tx queue to pull packets from
  *
  * @hw: pointer as obtained from ieee80211_alloc_hw()