diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-09 05:40:54 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-09 05:40:54 +0400 |
commit | 35a9ad8af0bb0fa3525e6d0d20e32551d226f38e (patch) | |
tree | 15b4b33206818886d9cff371fd2163e073b70568 /include/net/udp_tunnel.h | |
parent | d5935b07da53f74726e2a65dd4281d0f2c70e5d4 (diff) | |
parent | 64b1f00a0830e1c53874067273a096b228d83d36 (diff) | |
download | linux-35a9ad8af0bb0fa3525e6d0d20e32551d226f38e.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Most notable changes in here:
1) By far the biggest accomplishment, thanks to a large range of
contributors, is the addition of multi-send for transmit. This is
the result of discussions back in Chicago, and the hard work of
several individuals.
Now, when the ->ndo_start_xmit() method of a driver sees
skb->xmit_more as true, it can choose to defer the doorbell
telling the driver to start processing the new TX queue entires.
skb->xmit_more means that the generic networking is guaranteed to
call the driver immediately with another SKB to send.
There is logic added to the qdisc layer to dequeue multiple
packets at a time, and the handling mis-predicted offloads in
software is now done with no locks held.
Finally, pktgen is extended to have a "burst" parameter that can
be used to test a multi-send implementation.
Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
virtio_net
Adding support is almost trivial, so export more drivers to
support this optimization soon.
I want to thank, in no particular or implied order, Jesper
Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
David Tat, Hannes Frederic Sowa, and Rusty Russell.
2) PTP and timestamping support in bnx2x, from Michal Kalderon.
3) Allow adjusting the rx_copybreak threshold for a driver via
ethtool, and add rx_copybreak support to enic driver. From
Govindarajulu Varadarajan.
4) Significant enhancements to the generic PHY layer and the bcm7xxx
driver in particular (EEE support, auto power down, etc.) from
Florian Fainelli.
5) Allow raw buffers to be used for flow dissection, allowing drivers
to determine the optimal "linear pull" size for devices that DMA
into pools of pages. The objective is to get exactly the
necessary amount of headers into the linear SKB area pre-pulled,
but no more. The new interface drivers use is eth_get_headlen().
From WANG Cong, with driver conversions (several had their own
by-hand duplicated implementations) by Alexander Duyck and Eric
Dumazet.
6) Support checksumming more smoothly and efficiently for
encapsulations, and add "foo over UDP" facility. From Tom
Herbert.
7) Add Broadcom SF2 switch driver to DSA layer, from Florian
Fainelli.
8) eBPF now can load programs via a system call and has an extensive
testsuite. Alexei Starovoitov and Daniel Borkmann.
9) Major overhaul of the packet scheduler to use RCU in several major
areas such as the classifiers and rate estimators. From John
Fastabend.
10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
Duyck.
11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
Dumazet.
12) Add Datacenter TCP congestion control algorithm support, From
Florian Westphal.
13) Reorganize sk_buff so that __copy_skb_header() is significantly
faster. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
netlabel: directly return netlbl_unlabel_genl_init()
net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
net: description of dma_cookie cause make xmldocs warning
cxgb4: clean up a type issue
cxgb4: potential shift wrapping bug
i40e: skb->xmit_more support
net: fs_enet: Add NAPI TX
net: fs_enet: Remove non NAPI RX
r8169:add support for RTL8168EP
net_sched: copy exts->type in tcf_exts_change()
wimax: convert printk to pr_foo()
af_unix: remove 0 assignment on static
ipv6: Do not warn for informational ICMP messages, regardless of type.
Update Intel Ethernet Driver maintainers list
bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
tipc: fix bug in multicast congestion handling
net: better IFF_XMIT_DST_RELEASE support
net/mlx4_en: remove NETDEV_TX_BUSY
3c59x: fix bad split of cpu_to_le32(pci_map_single())
net: bcmgenet: fix Tx ring priority programming
...
Diffstat (limited to 'include/net/udp_tunnel.h')
-rw-r--r-- | include/net/udp_tunnel.h | 85 |
1 files changed, 83 insertions, 2 deletions
diff --git a/include/net/udp_tunnel.h b/include/net/udp_tunnel.h index ffd69cbded35..a47790bcaa38 100644 --- a/include/net/udp_tunnel.h +++ b/include/net/udp_tunnel.h @@ -1,6 +1,14 @@ #ifndef __NET_UDP_TUNNEL_H #define __NET_UDP_TUNNEL_H +#include <net/ip_tunnels.h> +#include <net/udp.h> + +#if IS_ENABLED(CONFIG_IPV6) +#include <net/ipv6.h> +#include <net/addrconf.h> +#endif + struct udp_port_cfg { u8 family; @@ -26,7 +34,80 @@ struct udp_port_cfg { use_udp6_rx_checksums:1; }; -int udp_sock_create(struct net *net, struct udp_port_cfg *cfg, - struct socket **sockp); +int udp_sock_create4(struct net *net, struct udp_port_cfg *cfg, + struct socket **sockp); + +#if IS_ENABLED(CONFIG_IPV6) +int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg, + struct socket **sockp); +#else +static inline int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg, + struct socket **sockp) +{ + return 0; +} +#endif + +static inline int udp_sock_create(struct net *net, + struct udp_port_cfg *cfg, + struct socket **sockp) +{ + if (cfg->family == AF_INET) + return udp_sock_create4(net, cfg, sockp); + + if (cfg->family == AF_INET6) + return udp_sock_create6(net, cfg, sockp); + + return -EPFNOSUPPORT; +} + +typedef int (*udp_tunnel_encap_rcv_t)(struct sock *sk, struct sk_buff *skb); +typedef void (*udp_tunnel_encap_destroy_t)(struct sock *sk); + +struct udp_tunnel_sock_cfg { + void *sk_user_data; /* user data used by encap_rcv call back */ + /* Used for setting up udp_sock fields, see udp.h for details */ + __u8 encap_type; + udp_tunnel_encap_rcv_t encap_rcv; + udp_tunnel_encap_destroy_t encap_destroy; +}; + +/* Setup the given (UDP) sock to receive UDP encapsulated packets */ +void setup_udp_tunnel_sock(struct net *net, struct socket *sock, + struct udp_tunnel_sock_cfg *sock_cfg); + +/* Transmit the skb using UDP encapsulation. */ +int udp_tunnel_xmit_skb(struct socket *sock, struct rtable *rt, + struct sk_buff *skb, __be32 src, __be32 dst, + __u8 tos, __u8 ttl, __be16 df, __be16 src_port, + __be16 dst_port, bool xnet); + +#if IS_ENABLED(CONFIG_IPV6) +int udp_tunnel6_xmit_skb(struct socket *sock, struct dst_entry *dst, + struct sk_buff *skb, struct net_device *dev, + struct in6_addr *saddr, struct in6_addr *daddr, + __u8 prio, __u8 ttl, __be16 src_port, + __be16 dst_port); +#endif + +void udp_tunnel_sock_release(struct socket *sock); + +static inline struct sk_buff *udp_tunnel_handle_offloads(struct sk_buff *skb, + bool udp_csum) +{ + int type = udp_csum ? SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL; + + return iptunnel_handle_offloads(skb, udp_csum, type); +} + +static inline void udp_tunnel_encap_enable(struct socket *sock) +{ +#if IS_ENABLED(CONFIG_IPV6) + if (sock->sk->sk_family == PF_INET6) + ipv6_stub->udpv6_encap_enable(); + else +#endif + udp_encap_enable(); +} #endif |