Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...

1 files changed, 99 insertions, 9 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cca510a585c3..a810dfcb83c2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -715,6 +715,7 @@ enum mac80211_tx_info_flags {
  *	frame (PS-Poll or uAPSD).
  * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
  * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
+ * @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path
  *
  * These flags are used in tx_info->control.flags.
  */
@@ -723,6 +724,7 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTRL_PS_RESPONSE		= BIT(1),
 	IEEE80211_TX_CTRL_RATE_INJECT		= BIT(2),
 	IEEE80211_TX_CTRL_AMSDU			= BIT(3),
+	IEEE80211_TX_CTRL_FAST_XMIT		= BIT(4),
 };
 
 /*
@@ -1735,6 +1737,9 @@ struct ieee80211_sta_rates {
  * @supp_rates: Bitmap of supported rates (per band)
  * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
  * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
+ * @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU
+ *	that this station is allowed to transmit to us.
+ *	Can be modified by driver.
  * @wme: indicates whether the STA supports QoS/WME (if local devices does,
  *	otherwise always false)
  * @drv_priv: data area for driver use, will always be aligned to
@@ -1775,6 +1780,7 @@ struct ieee80211_sta {
 	u16 aid;
 	struct ieee80211_sta_ht_cap ht_cap;
 	struct ieee80211_sta_vht_cap vht_cap;
+	u8 max_rx_aggregation_subframes;
 	bool wme;
 	u8 uapsd_queues;
 	u8 max_sp;
@@ -2014,6 +2020,11 @@ struct ieee80211_txq {
  * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list
  *	skbs, needed for zero-copy software A-MSDU.
  *
+ * @IEEE80211_HW_REPORTS_LOW_ACK: The driver (or firmware) reports low ack event
+ *	by ieee80211_report_low_ack() based on its own algorithm. For such
+ *	drivers, mac80211 packet loss mechanism will not be triggered and driver
+ *	is completely depending on firmware event for station kickout.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2054,6 +2065,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_USES_RSS,
 	IEEE80211_HW_TX_AMSDU,
 	IEEE80211_HW_TX_FRAG_LIST,
+	IEEE80211_HW_REPORTS_LOW_ACK,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -2141,6 +2153,14 @@ enum ieee80211_hw_flags {
  *	the default is _GI | _BANDWIDTH.
  *	Use the %IEEE80211_RADIOTAP_VHT_KNOWN_* values.
  *
+ * @radiotap_timestamp: Information for the radiotap timestamp field; if the
+ *	'units_pos' member is set to a non-negative value it must be set to
+ *	a combination of a IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
+ *	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value, and then the timestamp
+ *	field will be added and populated from the &struct ieee80211_rx_status
+ *	device_timestamp. If the 'accuracy' member is non-negative, it's put
+ *	into the accuracy radiotap field and the accuracy known flag is set.
+ *
  * @netdev_features: netdev features to be set in each netdev created
  *	from this HW. Note that not all features are usable with mac80211,
  *	other features will be rejected during HW registration.
@@ -2159,6 +2179,8 @@ enum ieee80211_hw_flags {
  * @n_cipher_schemes: a size of an array of cipher schemes definitions.
  * @cipher_schemes: a pointer to an array of cipher scheme definitions
  *	supported by HW.
+ * @max_nan_de_entries: maximum number of NAN DE functions supported by the
+ *	device.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -2184,11 +2206,16 @@ struct ieee80211_hw {
 	u8 offchannel_tx_hw_queue;
 	u8 radiotap_mcs_details;
 	u16 radiotap_vht_details;
+	struct {
+		int units_pos;
+		s16 accuracy;
+	} radiotap_timestamp;
 	netdev_features_t netdev_features;
 	u8 uapsd_queues;
 	u8 uapsd_max_sp_len;
 	u8 n_cipher_schemes;
 	const struct ieee80211_cipher_scheme *cipher_schemes;
+	u8 max_nan_de_entries;
 };
 
 static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
@@ -3085,11 +3112,8 @@ enum ieee80211_reconfig_type {
  *
  * @sta_add_debugfs: Drivers can use this callback to add debugfs files
  *	when a station is added to mac80211's station list. This callback
- *	and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS
- *	conditional. This callback can sleep.
- *
- * @sta_remove_debugfs: Remove the debugfs files which were added using
- *	@sta_add_debugfs. This callback can sleep.
+ *	should be within a CONFIG_MAC80211_DEBUGFS conditional. This
+ *	callback can sleep.
  *
  * @sta_notify: Notifies low level driver about power state transition of an
  *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
@@ -3147,6 +3171,12 @@ enum ieee80211_reconfig_type {
  *	required function.
  *	The callback can sleep.
  *
+ * @offset_tsf: Offset the TSF timer by the specified value in the
+ *	firmware/hardware.  Preferred to set_tsf as it avoids delay between
+ *	calling set_tsf() and hardware getting programmed, which will show up
+ *	as TSF delay. Is not a required function.
+ *	The callback can sleep.
+ *
  * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
  *	with other STAs in the IBSS. This is only used in IBSS mode. This
  *	function is optional if the firmware/hardware takes full care of
@@ -3401,6 +3431,21 @@ enum ieee80211_reconfig_type {
  *	synchronization which is needed in case driver has in its RSS queues
  *	pending frames that were received prior to the control path action
  *	currently taken (e.g. disassociation) but are not processed yet.
+ *
+ * @start_nan: join an existing NAN cluster, or create a new one.
+ * @stop_nan: leave the NAN cluster.
+ * @nan_change_conf: change NAN configuration. The data in cfg80211_nan_conf
+ *	contains full new configuration and changes specify which parameters
+ *	are changed with respect to the last NAN config.
+ *	The driver gets both full configuration and the changed parameters since
+ *	some devices may need the full configuration while others need only the
+ *	changed parameters.
+ * @add_nan_func: Add a NAN function. Returns 0 on success. The data in
+ *	cfg80211_nan_func must not be referenced outside the scope of
+ *	this call.
+ * @del_nan_func: Remove a NAN function. The driver must call
+ *	ieee80211_nan_func_terminated() with
+ *	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST reason code upon removal.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -3485,10 +3530,6 @@ struct ieee80211_ops {
 				struct ieee80211_vif *vif,
 				struct ieee80211_sta *sta,
 				struct dentry *dir);
-	void (*sta_remove_debugfs)(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif,
-				   struct ieee80211_sta *sta,
-				   struct dentry *dir);
 #endif
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -3516,6 +3557,8 @@ struct ieee80211_ops {
 	u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			u64 tsf);
+	void (*offset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			   s64 offset);
 	void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
@@ -3640,6 +3683,21 @@ struct ieee80211_ops {
 	void (*wake_tx_queue)(struct ieee80211_hw *hw,
 			      struct ieee80211_txq *txq);
 	void (*sync_rx_queues)(struct ieee80211_hw *hw);
+
+	int (*start_nan)(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif,
+			 struct cfg80211_nan_conf *conf);
+	int (*stop_nan)(struct ieee80211_hw *hw,
+			struct ieee80211_vif *vif);
+	int (*nan_change_conf)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct cfg80211_nan_conf *conf, u32 changes);
+	int (*add_nan_func)(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    const struct cfg80211_nan_func *nan_func);
+	void (*del_nan_func)(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    u8 instance_id);
 };
 
 /**
@@ -5713,4 +5771,36 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
 void ieee80211_txq_get_depth(struct ieee80211_txq *txq,
 			     unsigned long *frame_cnt,
 			     unsigned long *byte_cnt);
+
+/**
+ * ieee80211_nan_func_terminated - notify about NAN function termination.
+ *
+ * This function is used to notify mac80211 about NAN function termination.
+ * Note that this function can't be called from hard irq.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @inst_id: the local instance id
+ * @reason: termination reason (one of the NL80211_NAN_FUNC_TERM_REASON_*)
+ * @gfp: allocation flags
+ */
+void ieee80211_nan_func_terminated(struct ieee80211_vif *vif,
+				   u8 inst_id,
+				   enum nl80211_nan_func_term_reason reason,
+				   gfp_t gfp);
+
+/**
+ * ieee80211_nan_func_match - notify about NAN function match event.
+ *
+ * This function is used to notify mac80211 about NAN function match. The
+ * cookie inside the match struct will be assigned by mac80211.
+ * Note that this function can't be called from hard irq.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @match: match event information
+ * @gfp: allocation flags
+ */
+void ieee80211_nan_func_match(struct ieee80211_vif *vif,
+			      struct cfg80211_nan_match_params *match,
+			      gfp_t gfp);
+
 #endif /* MAC80211_H */