Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

1 files changed, 74 insertions, 21 deletions

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 6efce384451e..58ad8c6492db 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -15,6 +15,17 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+
+enum dsa_tag_protocol {
+	DSA_TAG_PROTO_NONE = 0,
+	DSA_TAG_PROTO_DSA,
+	DSA_TAG_PROTO_TRAILER,
+	DSA_TAG_PROTO_EDSA,
+	DSA_TAG_PROTO_BRCM,
+};
 
 #define DSA_MAX_SWITCHES	4
 #define DSA_MAX_PORTS		12
@@ -23,9 +34,15 @@ struct dsa_chip_data {
 	/*
 	 * How to access the switch configuration registers.
 	 */
-	struct device	*mii_bus;
+	struct device	*host_dev;
 	int		sw_addr;
 
+	/* Device tree node pointer for this specific switch chip
+	 * used during switch setup in case additional properties
+	 * and resources needs to be used
+	 */
+	struct device_node *of_node;
+
 	/*
 	 * The names of the switch's ports.  Use "cpu" to
 	 * designate the switch port that the cpu is connected to,
@@ -34,6 +51,7 @@ struct dsa_chip_data {
 	 * or any other string to indicate this is a physical port.
 	 */
 	char		*port_names[DSA_MAX_PORTS];
+	struct device_node *port_dn[DSA_MAX_PORTS];
 
 	/*
 	 * An array (with nr_chips elements) of which element [a]
@@ -59,6 +77,8 @@ struct dsa_platform_data {
 	struct dsa_chip_data	*chip;
 };
 
+struct packet_type;
+
 struct dsa_switch_tree {
 	/*
 	 * Configuration data for the platform device that owns
@@ -71,7 +91,11 @@ struct dsa_switch_tree {
 	 * protocol to use.
 	 */
 	struct net_device	*master_netdev;
-	__be16			tag_protocol;
+	int			(*rcv)(struct sk_buff *skb,
+				       struct net_device *dev,
+				       struct packet_type *pt,
+				       struct net_device *orig_dev);
+	enum dsa_tag_protocol	tag_protocol;
 
 	/*
 	 * The switch and port to which the CPU is attached.
@@ -110,15 +134,16 @@ struct dsa_switch {
 	struct dsa_switch_driver	*drv;
 
 	/*
-	 * Reference to mii bus to use.
+	 * Reference to host device to use.
 	 */
-	struct mii_bus		*master_mii_bus;
+	struct device		*master_dev;
 
 	/*
 	 * Slave mii_bus and devices for the individual ports.
 	 */
 	u32			dsa_port_mask;
 	u32			phys_port_mask;
+	u32			phys_mii_mask;
 	struct mii_bus		*slave_mii_bus;
 	struct net_device	*ports[DSA_MAX_PORTS];
 };
@@ -147,15 +172,16 @@ static inline u8 dsa_upstream_port(struct dsa_switch *ds)
 struct dsa_switch_driver {
 	struct list_head	list;
 
-	__be16			tag_protocol;
+	enum dsa_tag_protocol	tag_protocol;
 	int			priv_size;
 
 	/*
 	 * Probing and setup.
 	 */
-	char	*(*probe)(struct mii_bus *bus, int sw_addr);
+	char	*(*probe)(struct device *host_dev, int sw_addr);
 	int	(*setup)(struct dsa_switch *ds);
 	int	(*set_addr)(struct dsa_switch *ds, u8 *addr);
+	u32	(*get_phy_flags)(struct dsa_switch *ds, int port);
 
 	/*
 	 * Access to the switch's PHY registers.
@@ -170,37 +196,64 @@ struct dsa_switch_driver {
 	void	(*poll_link)(struct dsa_switch *ds);
 
 	/*
+	 * Link state adjustment (called from libphy)
+	 */
+	void	(*adjust_link)(struct dsa_switch *ds, int port,
+				struct phy_device *phydev);
+	void	(*fixed_link_update)(struct dsa_switch *ds, int port,
+				struct fixed_phy_status *st);
+
+	/*
 	 * ethtool hardware statistics.
 	 */
 	void	(*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
 	void	(*get_ethtool_stats)(struct dsa_switch *ds,
 				     int port, uint64_t *data);
 	int	(*get_sset_count)(struct dsa_switch *ds);
+
+	/*
+	 * ethtool Wake-on-LAN
+	 */
+	void	(*get_wol)(struct dsa_switch *ds, int port,
+			   struct ethtool_wolinfo *w);
+	int	(*set_wol)(struct dsa_switch *ds, int port,
+			   struct ethtool_wolinfo *w);
+
+	/*
+	 * Suspend and resume
+	 */
+	int	(*suspend)(struct dsa_switch *ds);
+	int	(*resume)(struct dsa_switch *ds);
+
+	/*
+	 * Port enable/disable
+	 */
+	int	(*port_enable)(struct dsa_switch *ds, int port,
+			       struct phy_device *phy);
+	void	(*port_disable)(struct dsa_switch *ds, int port,
+				struct phy_device *phy);
+
+	/*
+	 * EEE setttings
+	 */
+	int	(*set_eee)(struct dsa_switch *ds, int port,
+			   struct phy_device *phydev,
+			   struct ethtool_eee *e);
+	int	(*get_eee)(struct dsa_switch *ds, int port,
+			   struct ethtool_eee *e);
 };
 
 void register_switch_driver(struct dsa_switch_driver *type);
 void unregister_switch_driver(struct dsa_switch_driver *type);
+struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev);
 
 static inline void *ds_to_priv(struct dsa_switch *ds)
 {
 	return (void *)(ds + 1);
 }
 
-/*
- * The original DSA tag format and some other tag formats have no
- * ethertype, which means that we need to add a little hack to the
- * networking receive path to make sure that received frames get
- * the right ->protocol assigned to them when one of those tag
- * formats is in use.
- */
-static inline bool dsa_uses_dsa_tags(struct dsa_switch_tree *dst)
-{
-	return !!(dst->tag_protocol == htons(ETH_P_DSA));
-}
-
-static inline bool dsa_uses_trailer_tags(struct dsa_switch_tree *dst)
+static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
 {
-	return !!(dst->tag_protocol == htons(ETH_P_TRAILER));
+	return dst->rcv != NULL;
 }
-
 #endif