Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2012-10-01 23:26:52 +0400
committer: Linus Torvalds <torvalds@linux-foundation.org> 2012-10-01 23:26:52 +0400
commit: 3498d13b8090c0b0ef911409fbc503a7c4cca6ef (patch)
tree: 254ca00276e863d9fba25707690c66b2a04c49e9 /include/linux
parent: def7cb8cd4e3258db88050eaaca5438bcc3dafca (diff)
parent: 0c57dfcc6c1d037243c2f8fbf62eab3633326ec0 (diff)
download: linux-3498d13b8090c0b0ef911409fbc503a7c4cca6ef.tar.xz
23 files changed, 403 insertions, 2053 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index fa217607c582..c57e064666e4 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -84,7 +84,6 @@ header-y += capability.h
 header-y += capi.h
 header-y += cciss_defs.h
 header-y += cciss_ioctl.h
-header-y += cdk.h
 header-y += cdrom.h
 header-y += cgroupstats.h
 header-y += chio.h
@@ -93,7 +92,6 @@ header-y += cn_proc.h
 header-y += coda.h
 header-y += coda_psdev.h
 header-y += coff.h
-header-y += comstats.h
 header-y += connector.h
 header-y += const.h
 header-y += cramfs_fs.h
@@ -140,7 +138,6 @@ header-y += fuse.h
 header-y += futex.h
 header-y += gameport.h
 header-y += gen_stats.h
-header-y += generic_serial.h
 header-y += genetlink.h
 header-y += gfs2_ondisk.h
 header-y += gigaset_dev.h
@@ -372,6 +369,7 @@ header-y += tipc.h
 header-y += tipc_config.h
 header-y += toshiba.h
 header-y += tty.h
+header-y += tty_flags.h
 header-y += types.h
 header-y += udf_fs_i.h
 header-y += udp.h
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d117b29d1062..f612c783170f 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -205,7 +205,6 @@ struct amba_pl011_data {
 	void *dma_tx_param;
         void (*init) (void);
 	void (*exit) (void);
-	void (*reset) (void);
 };
 #endif
 
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
deleted file mode 100644
index 1dc3ab0523fd..000000000000
--- a/include/linux/cd1400.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	cd1400.h  -- cd1400 UART hardware info.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_CD1400_H
-#define	_CD1400_H
-/*****************************************************************************/
-
-/*
- *	Define the number of async ports per cd1400 uart chip.
- */
-#define	CD1400_PORTS		4
-
-/*
- *	Define the cd1400 uarts internal FIFO sizes.
- */
-#define	CD1400_TXFIFOSIZE	12
-#define	CD1400_RXFIFOSIZE	12
-
-/*
- *	Local RX FIFO thresh hold level. Also define the RTS thresh hold
- *	based on the RX thresh hold.
- */
-#define	FIFO_RXTHRESHOLD	6
-#define	FIFO_RTSTHRESHOLD	7
-
-/*****************************************************************************/
-
-/*
- *	Define the cd1400 register addresses. These are all the valid
- *	registers with the cd1400. Some are global, some virtual, some
- *	per port.
- */
-#define	GFRCR		0x40
-#define	CAR		0x68
-#define	GCR		0x4b
-#define	SVRR		0x67
-#define	RICR		0x44
-#define	TICR		0x45
-#define	MICR		0x46
-#define	RIR		0x6b
-#define	TIR		0x6a
-#define	MIR		0x69
-#define	PPR		0x7e
-
-#define	RIVR		0x43
-#define	TIVR		0x42
-#define	MIVR		0x41
-#define	TDR		0x63
-#define	RDSR		0x62
-#define	MISR		0x4c
-#define	EOSRR		0x60
-
-#define	LIVR		0x18
-#define	CCR		0x05
-#define	SRER		0x06
-#define	COR1		0x08
-#define	COR2		0x09
-#define	COR3		0x0a
-#define	COR4		0x1e
-#define	COR5		0x1f
-#define	CCSR		0x0b
-#define	RDCR		0x0e
-#define	SCHR1		0x1a
-#define	SCHR2		0x1b
-#define	SCHR3		0x1c
-#define	SCHR4		0x1d
-#define	SCRL		0x22
-#define	SCRH		0x23
-#define	LNC		0x24
-#define	MCOR1		0x15
-#define	MCOR2		0x16
-#define	RTPR		0x21
-#define	MSVR1		0x6c
-#define	MSVR2		0x6d
-#define	PSVR		0x6f
-#define	RBPR		0x78
-#define	RCOR		0x7c
-#define	TBPR		0x72
-#define	TCOR		0x76
-
-/*****************************************************************************/
-
-/*
- *	Define the set of baud rate clock divisors.
- */
-#define	CD1400_CLK0	8
-#define	CD1400_CLK1	32
-#define	CD1400_CLK2	128
-#define	CD1400_CLK3	512
-#define	CD1400_CLK4	2048
-
-#define	CD1400_NUMCLKS	5
-
-/*****************************************************************************/
-
-/*
- *	Define the clock pre-scalar value to be a 5 ms clock. This should be
- *	OK for now. It would probably be better to make it 10 ms, but we
- *	can't fit that divisor into 8 bits!
- */
-#define	PPR_SCALAR	244
-
-/*****************************************************************************/
-
-/*
- *	Define values used to set character size options.
- */
-#define	COR1_CHL5	0x00
-#define	COR1_CHL6	0x01
-#define	COR1_CHL7	0x02
-#define	COR1_CHL8	0x03
-
-/*
- *	Define values used to set the number of stop bits.
- */
-#define	COR1_STOP1	0x00
-#define	COR1_STOP15	0x04
-#define	COR1_STOP2	0x08
-
-/*
- *	Define values used to set the parity scheme in use.
- */
-#define	COR1_PARNONE	0x00
-#define	COR1_PARFORCE	0x20
-#define	COR1_PARENB	0x40
-#define	COR1_PARIGNORE	0x10
-
-#define	COR1_PARODD	0x80
-#define	COR1_PAREVEN	0x00
-
-#define	COR2_IXM	0x80
-#define	COR2_TXIBE	0x40
-#define	COR2_ETC	0x20
-#define	COR2_LLM	0x10
-#define	COR2_RLM	0x08
-#define	COR2_RTSAO	0x04
-#define	COR2_CTSAE	0x02
-
-#define	COR3_SCDRNG	0x80
-#define	COR3_SCD34	0x40
-#define	COR3_FCT	0x20
-#define	COR3_SCD12	0x10
-
-/*
- *	Define values used by COR4.
- */
-#define	COR4_BRKINT	0x08
-#define	COR4_IGNBRK	0x18
-
-/*****************************************************************************/
-
-/*
- *	Define the modem control register values.
- *	Note that the actual hardware is a little different to the conventional
- *	pin names on the cd1400.
- */
-#define	MSVR1_DTR	0x01
-#define	MSVR1_DSR	0x10
-#define	MSVR1_RI	0x20
-#define	MSVR1_CTS	0x40
-#define	MSVR1_DCD	0x80
-
-#define	MSVR2_RTS	0x02
-#define	MSVR2_DSR	0x10
-#define	MSVR2_RI	0x20
-#define	MSVR2_CTS	0x40
-#define	MSVR2_DCD	0x80
-
-#define	MCOR1_DCD	0x80
-#define	MCOR1_CTS	0x40
-#define	MCOR1_RI	0x20
-#define	MCOR1_DSR	0x10
-
-#define	MCOR2_DCD	0x80
-#define	MCOR2_CTS	0x40
-#define	MCOR2_RI	0x20
-#define	MCOR2_DSR	0x10
-
-/*****************************************************************************/
-
-/*
- *	Define the bits used with the service (interrupt) enable register.
- */
-#define	SRER_NNDT	0x01
-#define	SRER_TXEMPTY	0x02
-#define	SRER_TXDATA	0x04
-#define	SRER_RXDATA	0x10
-#define	SRER_MODEM	0x80
-
-/*****************************************************************************/
-
-/*
- *	Define operational commands for the command register.
- */
-#define	CCR_RESET	0x80
-#define	CCR_CORCHANGE	0x4e
-#define	CCR_SENDCH	0x20
-#define	CCR_CHANCTRL	0x10
-
-#define	CCR_TXENABLE	(CCR_CHANCTRL | 0x08)
-#define	CCR_TXDISABLE	(CCR_CHANCTRL | 0x04)
-#define	CCR_RXENABLE	(CCR_CHANCTRL | 0x02)
-#define	CCR_RXDISABLE	(CCR_CHANCTRL | 0x01)
-
-#define	CCR_SENDSCHR1	(CCR_SENDCH | 0x01)
-#define	CCR_SENDSCHR2	(CCR_SENDCH | 0x02)
-#define	CCR_SENDSCHR3	(CCR_SENDCH | 0x03)
-#define	CCR_SENDSCHR4	(CCR_SENDCH | 0x04)
-
-#define	CCR_RESETCHAN	(CCR_RESET | 0x00)
-#define	CCR_RESETFULL	(CCR_RESET | 0x01)
-#define	CCR_TXFLUSHFIFO	(CCR_RESET | 0x02)
-
-#define	CCR_MAXWAIT	10000
-
-/*****************************************************************************/
-
-/*
- *	Define the valid acknowledgement types (for hw ack cycle).
- */
-#define	ACK_TYPMASK	0x07
-#define	ACK_TYPTX	0x02
-#define	ACK_TYPMDM	0x01
-#define	ACK_TYPRXGOOD	0x03
-#define	ACK_TYPRXBAD	0x07
-
-#define	SVRR_RX		0x01
-#define	SVRR_TX		0x02
-#define	SVRR_MDM	0x04
-
-#define	ST_OVERRUN	0x01
-#define	ST_FRAMING	0x02
-#define	ST_PARITY	0x04
-#define	ST_BREAK	0x08
-#define	ST_SCHAR1	0x10
-#define	ST_SCHAR2	0x20
-#define	ST_SCHAR3	0x30
-#define	ST_SCHAR4	0x40
-#define	ST_RANGE	0x70
-#define	ST_SCHARMASK	0x70
-#define	ST_TIMEOUT	0x80
-
-#define	MISR_DCD	0x80
-#define	MISR_CTS	0x40
-#define	MISR_RI		0x20
-#define	MISR_DSR	0x10
-
-/*****************************************************************************/
-
-/*
- *	Defines for the CCSR status register.
- */
-#define	CCSR_RXENABLED	0x80
-#define	CCSR_RXFLOWON	0x40
-#define	CCSR_RXFLOWOFF	0x20
-#define	CCSR_TXENABLED	0x08
-#define	CCSR_TXFLOWON	0x04
-#define	CCSR_TXFLOWOFF	0x02
-
-/*****************************************************************************/
-
-/*
- *	Define the embedded commands.
- */
-#define	ETC_CMD		0x00
-#define	ETC_STARTBREAK	0x81
-#define	ETC_DELAY	0x82
-#define	ETC_STOPBREAK	0x83
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
deleted file mode 100644
index 80093a8d4f64..000000000000
--- a/include/linux/cdk.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	cdk.h  -- CDK interface definitions.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_CDK_H
-#define	_CDK_H
-/*****************************************************************************/
-
-#pragma	pack(2)
-
-/*
- *	The following set of definitions is used to communicate with the
- *	shared memory interface of the Stallion intelligent multiport serial
- *	boards. The definitions in this file are taken directly from the
- *	document titled "Generic Stackable Interface, Downloader and
- *	Communications Development Kit".
- */
-
-/*
- *	Define the set of important shared memory addresses. These are
- *	required to initialize the board and get things started. All of these
- *	addresses are relative to the start of the shared memory.
- */
-#define	CDK_SIGADDR	0x200
-#define	CDK_FEATADDR	0x280
-#define	CDK_CDKADDR	0x300
-#define	CDK_RDYADDR	0x262
-
-#define	CDK_ALIVEMARKER	13
-
-/*
- *	On hardware power up the ROMs located on the EasyConnection 8/64 will
- *	fill out the following signature information into shared memory. This
- *	way the host system can quickly determine that the board is present
- *	and is operational.
- */
-typedef struct cdkecpsig {
-	unsigned long	magic;
-	unsigned short	romver;
-	unsigned short	cputype;
-	unsigned char	panelid[8];
-} cdkecpsig_t;
-
-#define	ECP_MAGIC	0x21504345
-
-/*
- *	On hardware power up the ROMs located on the ONboard, Stallion and
- *	Brumbys will fill out the following signature information into shared
- *	memory. This way the host system can quickly determine that the board
- *	is present and is operational.
- */
-typedef struct cdkonbsig {
-	unsigned short	magic0;
-	unsigned short	magic1;
-	unsigned short	magic2;
-	unsigned short	magic3;
-	unsigned short	romver;
-	unsigned short	memoff;
-	unsigned short	memseg;
-	unsigned short	amask0;
-	unsigned short	pic;
-	unsigned short	status;
-	unsigned short	btype;
-	unsigned short	clkticks;
-	unsigned short	clkspeed;
-	unsigned short	amask1;
-	unsigned short	amask2;
-} cdkonbsig_t;
-
-#define	ONB_MAGIC0	0xf2a7
-#define	ONB_MAGIC1	0xa149
-#define	ONB_MAGIC2	0x6352
-#define	ONB_MAGIC3	0xf121
-
-/*
- *	Define the feature area structure. The feature area is the set of
- *	startup parameters used by the slave image when it starts executing.
- *	They allow for the specification of buffer sizes, debug trace, etc.
- */
-typedef struct cdkfeature {
-	unsigned long	debug;
-	unsigned long	banner;
-	unsigned long	etype;
-	unsigned long	nrdevs;
-	unsigned long	brdspec;
-	unsigned long	txrqsize;
-	unsigned long	rxrqsize;
-	unsigned long	flags;
-} cdkfeature_t;
-
-#define	ETYP_DDK	0
-#define	ETYP_CDK	1
-
-/*
- *	Define the CDK header structure. This is the info that the slave
- *	environment sets up after it has been downloaded and started. It
- *	essentially provides a memory map for the shared memory interface.
- */
-typedef struct cdkhdr {
-	unsigned short	command;
-	unsigned short	status;
-	unsigned short	port;
-	unsigned short	mode;
-	unsigned long	cmd_buf[14];
-	unsigned short	alive_cnt;
-	unsigned short	intrpt_mode;
-	unsigned char	intrpt_id[8];
-	unsigned char	ver_release;
-	unsigned char	ver_modification;
-	unsigned char	ver_fix;
-	unsigned char	deadman_restart;
-	unsigned short	deadman;
-	unsigned short	nrdevs;
-	unsigned long	memp;
-	unsigned long	hostp;
-	unsigned long	slavep;
-	unsigned char	hostreq;
-	unsigned char	slavereq;
-	unsigned char	cmd_reserved[30];
-} cdkhdr_t;
-
-#define	MODE_DDK	0
-#define	MODE_CDK	1
-
-#define	IMD_INTR	0x0
-#define	IMD_PPINTR	0x1
-#define	IMD_POLL	0xff
-
-/*
- *	Define the memory mapping structure. This structure is pointed to by
- *	the memp field in the stlcdkhdr struct. As many as these structures
- *	as required are laid out in shared memory to define how the rest of
- *	shared memory is divided up. There will be one for each port.
- */
-typedef struct cdkmem {
-	unsigned short	dtype;
-	unsigned long	offset;
-} cdkmem_t;
-
-#define	TYP_UNDEFINED	0x0
-#define	TYP_ASYNCTRL	0x1
-#define	TYP_ASYNC	0x20
-#define	TYP_PARALLEL	0x40
-#define	TYP_SYNCX21	0x60
-
-/*****************************************************************************/
-
-/*
- *	Following is a set of defines and structures used to actually deal
- *	with the serial ports on the board. Firstly is the set of commands
- *	that can be applied to ports.
- */
-#define	ASYCMD		(((unsigned long) 'a') << 8)
-
-#define	A_NULL		(ASYCMD | 0)
-#define	A_FLUSH		(ASYCMD | 1)
-#define	A_BREAK		(ASYCMD | 2)
-#define	A_GETPORT	(ASYCMD | 3)
-#define	A_SETPORT	(ASYCMD | 4)
-#define	A_SETPORTF	(ASYCMD | 5)
-#define	A_SETPORTFTX	(ASYCMD | 6)
-#define	A_SETPORTFRX	(ASYCMD | 7)
-#define	A_GETSIGNALS	(ASYCMD | 8)
-#define	A_SETSIGNALS	(ASYCMD | 9)
-#define	A_SETSIGNALSF	(ASYCMD | 10)
-#define	A_SETSIGNALSFTX	(ASYCMD | 11)
-#define	A_SETSIGNALSFRX	(ASYCMD | 12)
-#define	A_GETNOTIFY	(ASYCMD | 13)
-#define	A_SETNOTIFY	(ASYCMD | 14)
-#define	A_NOTIFY	(ASYCMD | 15)
-#define	A_PORTCTRL	(ASYCMD | 16)
-#define	A_GETSTATS	(ASYCMD | 17)
-#define	A_RQSTATE	(ASYCMD | 18)
-#define	A_FLOWSTATE	(ASYCMD | 19)
-#define	A_CLEARSTATS	(ASYCMD | 20)
-
-/*
- *	Define those arguments used for simple commands.
- */
-#define	FLUSHRX		0x1
-#define	FLUSHTX		0x2
-
-#define	BREAKON		-1
-#define	BREAKOFF	-2
-
-/*
- *	Define the port setting structure, and all those defines that go along
- *	with it. Basically this structure defines the characteristics of this
- *	port: baud rate, chars, parity, input/output char cooking etc.
- */
-typedef struct asyport {
-	unsigned long	baudout;
-	unsigned long	baudin;
-	unsigned long	iflag;
-	unsigned long	oflag;
-	unsigned long	lflag;
-	unsigned long	pflag;
-	unsigned long	flow;
-	unsigned long	spare1;
-	unsigned short	vtime;
-	unsigned short	vmin;
-	unsigned short	txlo;
-	unsigned short	txhi;
-	unsigned short	rxlo;
-	unsigned short	rxhi;
-	unsigned short	rxhog;
-	unsigned short	spare2;
-	unsigned char	csize;
-	unsigned char	stopbs;
-	unsigned char	parity;
-	unsigned char	stopin;
-	unsigned char	startin;
-	unsigned char	stopout;
-	unsigned char	startout;
-	unsigned char	parmark;
-	unsigned char	brkmark;
-	unsigned char	cc[11];
-} asyport_t;
-
-#define	PT_STOP1	0x0
-#define	PT_STOP15	0x1
-#define	PT_STOP2	0x2
-
-#define	PT_NOPARITY	0x0
-#define	PT_ODDPARITY	0x1
-#define	PT_EVENPARITY	0x2
-#define	PT_MARKPARITY	0x3
-#define	PT_SPACEPARITY	0x4
-
-#define	F_NONE		0x0
-#define	F_IXON		0x1
-#define	F_IXOFF		0x2
-#define	F_IXANY		0x4
-#define	F_IOXANY	0x8
-#define	F_RTSFLOW	0x10
-#define	F_CTSFLOW	0x20
-#define	F_DTRFLOW	0x40
-#define	F_DCDFLOW	0x80
-#define	F_DSROFLOW	0x100
-#define	F_DSRIFLOW	0x200
-
-#define	FI_NORX		0x1
-#define	FI_RAW		0x2
-#define	FI_ISTRIP	0x4
-#define	FI_UCLC		0x8
-#define	FI_INLCR	0x10
-#define	FI_ICRNL	0x20
-#define	FI_IGNCR	0x40
-#define	FI_IGNBREAK	0x80
-#define	FI_DSCRDBREAK	0x100
-#define	FI_1MARKBREAK	0x200
-#define	FI_2MARKBREAK	0x400
-#define	FI_XCHNGBREAK	0x800
-#define	FI_IGNRXERRS	0x1000
-#define	FI_DSCDRXERRS	0x2000
-#define	FI_1MARKRXERRS	0x4000
-#define	FI_2MARKRXERRS	0x8000
-#define	FI_XCHNGRXERRS	0x10000
-#define	FI_DSCRDNULL	0x20000
-
-#define	FO_OLCUC	0x1
-#define	FO_ONLCR	0x2
-#define	FO_OOCRNL	0x4
-#define	FO_ONOCR	0x8
-#define	FO_ONLRET	0x10
-#define	FO_ONL		0x20
-#define	FO_OBS		0x40
-#define	FO_OVT		0x80
-#define	FO_OFF		0x100
-#define	FO_OTAB1	0x200
-#define	FO_OTAB2	0x400
-#define	FO_OTAB3	0x800
-#define	FO_OCR1		0x1000
-#define	FO_OCR2		0x2000
-#define	FO_OCR3		0x4000
-#define	FO_OFILL	0x8000
-#define	FO_ODELL	0x10000
-
-#define	P_RTSLOCK	0x1
-#define	P_CTSLOCK	0x2
-#define	P_MAPRTS	0x4
-#define	P_MAPCTS	0x8
-#define	P_LOOPBACK	0x10
-#define	P_DTRFOLLOW	0x20
-#define	P_FAKEDCD	0x40
-
-#define	P_RXIMIN	0x10000
-#define	P_RXITIME	0x20000
-#define	P_RXTHOLD	0x40000
-
-/*
- *	Define a structure to communicate serial port signal and data state
- *	information.
- */
-typedef struct asysigs {
-	unsigned long	data;
-	unsigned long	signal;
-	unsigned long	sigvalue;
-} asysigs_t;
-
-#define	DT_TXBUSY	0x1
-#define	DT_TXEMPTY	0x2
-#define	DT_TXLOW	0x4
-#define	DT_TXHIGH	0x8
-#define	DT_TXFULL	0x10
-#define	DT_TXHOG	0x20
-#define	DT_TXFLOWED	0x40
-#define	DT_TXBREAK	0x80
-
-#define	DT_RXBUSY	0x100
-#define	DT_RXEMPTY	0x200
-#define	DT_RXLOW	0x400
-#define	DT_RXHIGH	0x800
-#define	DT_RXFULL	0x1000
-#define	DT_RXHOG	0x2000
-#define	DT_RXFLOWED	0x4000
-#define	DT_RXBREAK	0x8000
-
-#define	SG_DTR		0x1
-#define	SG_DCD		0x2
-#define	SG_RTS		0x4
-#define	SG_CTS		0x8
-#define	SG_DSR		0x10
-#define	SG_RI		0x20
-
-/*
- *	Define the notification setting structure. This is used to tell the
- *	port what events we want to be informed about. Fields here use the
- *	same defines as for the asysigs structure above.
- */
-typedef struct asynotify {
-	unsigned long	ctrl;
-	unsigned long	data;
-	unsigned long	signal;
-	unsigned long	sigvalue;
-} asynotify_t;
-
-/*
- *	Define the port control structure. It is used to do fine grain
- *	control operations on the port.
- */
-typedef struct {
-	unsigned long	rxctrl;
-	unsigned long	txctrl;
-	char		rximdch;
-	char		tximdch;
-	char		spare1;
-	char		spare2;
-} asyctrl_t;
-
-#define	CT_ENABLE	0x1
-#define	CT_DISABLE	0x2
-#define	CT_STOP		0x4
-#define	CT_START	0x8
-#define	CT_STARTFLOW	0x10
-#define	CT_STOPFLOW	0x20
-#define	CT_SENDCHR	0x40
-
-/*
- *	Define the stats structure kept for each port. This is a useful set
- *	of data collected for each port on the slave. The A_GETSTATS command
- *	is used to retrieve this data from the slave.
- */
-typedef struct asystats {
-	unsigned long	opens;
-	unsigned long	txchars;
-	unsigned long	rxchars;
-	unsigned long	txringq;
-	unsigned long	rxringq;
-	unsigned long	txmsgs;
-	unsigned long	rxmsgs;
-	unsigned long	txflushes;
-	unsigned long	rxflushes;
-	unsigned long	overruns;
-	unsigned long	framing;
-	unsigned long	parity;
-	unsigned long	ringover;
-	unsigned long	lost;
-	unsigned long	rxstart;
-	unsigned long	rxstop;
-	unsigned long	txstart;
-	unsigned long	txstop;
-	unsigned long	dcdcnt;
-	unsigned long	dtrcnt;
-	unsigned long	ctscnt;
-	unsigned long	rtscnt;
-	unsigned long	dsrcnt;
-	unsigned long	ricnt;
-	unsigned long	txbreaks;
-	unsigned long	rxbreaks;
-	unsigned long	signals;
-	unsigned long	state;
-	unsigned long	hwid;
-} asystats_t;
-
-/*****************************************************************************/
-
-/*
- *	All command and control communication with a device on the slave is
- *	via a control block in shared memory. Each device has its own control
- *	block, defined by the following structure. The control block allows
- *	the host to open, close and control the device on the slave.
- */
-typedef struct cdkctrl {
-	unsigned char	open;
-	unsigned char	close;
-	unsigned long	openarg;
-	unsigned long	closearg;
-	unsigned long	cmd;
-	unsigned long	status;
-	unsigned long	args[32];
-} cdkctrl_t;
-
-/*
- *	Each device on the slave passes data to and from the host via a ring
- *	queue in shared memory. Define a ring queue structure to hold the
- *	vital information about each ring queue. Two ring queues will be
- *	allocated for each port, one for receive data and one for transmit
- *	data.
- */
-typedef struct cdkasyrq {
-	unsigned long	offset;
-	unsigned short	size;
-	unsigned short	head;
-	unsigned short	tail;
-} cdkasyrq_t;
-
-/*
- *	Each asynchronous port is defined in shared memory by the following
- *	structure. It contains a control block to command a device, and also
- *	the necessary data channel information as well.
- */
-typedef struct cdkasy {
-	cdkctrl_t	ctrl;
-	unsigned short	notify;
-	asynotify_t	changed;
-	unsigned short	receive;
-	cdkasyrq_t	rxq;
-	unsigned short	transmit;
-	cdkasyrq_t	txq;
-} cdkasy_t;
-
-#pragma	pack()
-
-/*****************************************************************************/
-
-/*
- *	Define the set of ioctls used by the driver to do special things
- *	to the board. These include interrupting it, and initializing
- *	the driver after board startup and shutdown.
- */
-#include <linux/ioctl.h>
-
-#define	STL_BINTR	_IO('s',20)
-#define	STL_BSTART	_IO('s',21)
-#define	STL_BSTOP	_IO('s',22)
-#define	STL_BRESET	_IO('s',23)
-
-/*
- *	Define a set of ioctl extensions, used to get at special stuff.
- */
-#define	STL_GETPFLAG	_IO('s',80)
-#define	STL_SETPFLAG	_IO('s',81)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
deleted file mode 100644
index 3f5ea8e8026d..000000000000
--- a/include/linux/comstats.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	comstats.h  -- Serial Port Stats.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_COMSTATS_H
-#define	_COMSTATS_H
-/*****************************************************************************/
-
-/*
- *	Serial port stats structure. The structure itself is UART
- *	independent, but some fields may be UART/driver specific (for
- *	example state).
- */
-
-typedef struct {
-	unsigned long	brd;
-	unsigned long	panel;
-	unsigned long	port;
-	unsigned long	hwid;
-	unsigned long	type;
-	unsigned long	txtotal;
-	unsigned long	rxtotal;
-	unsigned long	txbuffered;
-	unsigned long	rxbuffered;
-	unsigned long	rxoverrun;
-	unsigned long	rxparity;
-	unsigned long	rxframing;
-	unsigned long	rxlost;
-	unsigned long	txbreaks;
-	unsigned long	rxbreaks;
-	unsigned long	txxon;
-	unsigned long	txxoff;
-	unsigned long	rxxon;
-	unsigned long	rxxoff;
-	unsigned long	txctson;
-	unsigned long	txctsoff;
-	unsigned long	rxrtson;
-	unsigned long	rxrtsoff;
-	unsigned long	modem;
-	unsigned long	state;
-	unsigned long	flags;
-	unsigned long	ttystate;
-	unsigned long	cflags;
-	unsigned long	iflags;
-	unsigned long	oflags;
-	unsigned long	lflags;
-	unsigned long	signals;
-} comstats_t;
-
-
-/*
- *	Board stats structure. Returns useful info about the board.
- */
-
-#define	COM_MAXPANELS	8
-
-typedef struct {
-	unsigned long	panel;
-	unsigned long	type;
-	unsigned long	hwid;
-	unsigned long	nrports;
-} companel_t;
-
-typedef struct {
-	unsigned long	brd;
-	unsigned long	type;
-	unsigned long	hwid;
-	unsigned long	state;
-	unsigned long	ioaddr;
-	unsigned long	ioaddr2;
-	unsigned long	memaddr;
-	unsigned long	irq;
-	unsigned long	nrpanels;
-	unsigned long	nrports;
-	companel_t	panels[COM_MAXPANELS];
-} combrd_t;
-
-
-/*
- *	Define the ioctl operations for stats stuff.
- */
-#include <linux/ioctl.h>
-
-#define	COM_GETPORTSTATS	_IO('c',30)
-#define	COM_CLRPORTSTATS	_IO('c',31)
-#define	COM_GETBRDSTATS		_IO('c',32)
-
-
-/*
- *	Define the set of ioctls that give user level access to the
- *	private port, panel and board structures. The argument required
- *	will be driver dependent!  
- */
-#define	COM_READPORT		_IO('c',40)
-#define	COM_READBOARD		_IO('c',41)
-#define	COM_READPANEL		_IO('c',42)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
deleted file mode 100644
index 79b3eb37243a..000000000000
--- a/include/linux/generic_serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  generic_serial.h
- *
- *  Copyright (C) 1998 R.E.Wolff@BitWizard.nl
- *
- *  written for the SX serial driver.
- *
- *  Version 0.1 -- December, 1998.
- */
-
-#ifndef GENERIC_SERIAL_H
-#define GENERIC_SERIAL_H
-
-#warning Use of this header is deprecated.
-#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
-
-/* Flags */
-/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
-   used in serial.c, but they are also used in all other serial drivers. 
-   Make sure they don't clash with these here... */
-#define GS_TX_INTEN      0x00800000
-#define GS_RX_INTEN      0x00400000
-#define GS_ACTIVE        0x00200000
-
-#define GS_TYPE_NORMAL   1
-
-#define GS_DEBUG_FLUSH   0x00000001
-#define GS_DEBUG_BTR     0x00000002
-#define GS_DEBUG_TERMIOS 0x00000004
-#define GS_DEBUG_STUFF   0x00000008
-#define GS_DEBUG_CLOSE   0x00000010
-#define GS_DEBUG_FLOW    0x00000020
-#define GS_DEBUG_WRITE   0x00000040
-
-#endif
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
deleted file mode 100644
index ad700a60c158..000000000000
--- a/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	istallion.h  -- stallion intelligent multiport serial driver.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_ISTALLION_H
-#define	_ISTALLION_H
-/*****************************************************************************/
-
-/*
- *	Define important driver constants here.
- */
-#define	STL_MAXBRDS		4
-#define	STL_MAXPANELS		4
-#define	STL_MAXPORTS		64
-#define	STL_MAXCHANS		(STL_MAXPORTS + 1)
-#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *	Define a set of structures to hold all the board/panel/port info
- *	for our ports. These will be dynamically allocated as required at
- *	driver initialization time.
- */
-
-/*
- *	Port and board structures to hold status info about each object.
- *	The board structure contains pointers to structures for each port
- *	connected to it. Panels are not distinguished here, since
- *	communication with the slave board will always be on a per port
- *	basis.
- */
-struct stliport {
-	unsigned long		magic;
-	struct tty_port		port;
-	unsigned int		portnr;
-	unsigned int		panelnr;
-	unsigned int		brdnr;
-	unsigned long		state;
-	unsigned int		devnr;
-	int			baud_base;
-	int			custom_divisor;
-	int			closing_wait;
-	int			rc;
-	int			argsize;
-	void			*argp;
-	unsigned int		rxmarkmsk;
-	wait_queue_head_t	raw_wait;
-	struct asysigs		asig;
-	unsigned long		addr;
-	unsigned long		rxoffset;
-	unsigned long		txoffset;
-	unsigned long		sigs;
-	unsigned long		pflag;
-	unsigned int		rxsize;
-	unsigned int		txsize;
-	unsigned char		reqbit;
-	unsigned char		portidx;
-	unsigned char		portbit;
-};
-
-/*
- *	Use a structure of function pointers to do board level operations.
- *	These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
-	unsigned long	magic;
-	unsigned int	brdnr;
-	unsigned int	brdtype;
-	unsigned long	state;
-	unsigned int	nrpanels;
-	unsigned int	nrports;
-	unsigned int	nrdevs;
-	unsigned int	iobase;
-	int		iosize;
-	unsigned long	memaddr;
-	void		__iomem *membase;
-	unsigned long	memsize;
-	int		pagesize;
-	int		hostoffset;
-	int		slaveoffset;
-	int		bitsize;
-	int		enabval;
-	unsigned int	panels[STL_MAXPANELS];
-	int		panelids[STL_MAXPANELS];
-	void		(*init)(struct stlibrd *brdp);
-	void		(*enable)(struct stlibrd *brdp);
-	void		(*reenable)(struct stlibrd *brdp);
-	void		(*disable)(struct stlibrd *brdp);
-	void		__iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
-	void		(*intr)(struct stlibrd *brdp);
-	void		(*reset)(struct stlibrd *brdp);
-	struct stliport	*ports[STL_MAXPORTS];
-};
-
-
-/*
- *	Define MAGIC numbers used for above structures.
- */
-#define	STLI_PORTMAGIC	0xe671c7a1
-#define	STLI_BOARDMAGIC	0x4bc6c825
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index daf4a3a40ee0..b7c8cdc1d422 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -65,7 +65,6 @@ struct kbd_struct {
 
 extern int kbd_init(void);
 
-extern unsigned char getledstate(void);
 extern void setledstate(struct kbd_struct *kbd, unsigned int led);
 
 extern int do_poke_blanked_console;
@@ -145,16 +144,4 @@ void compute_shiftstate(void);
 
 extern unsigned int keymap_count;
 
-/* console.c */
-
-static inline void con_schedule_flip(struct tty_struct *t)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&t->buf.lock, flags);
-	if (t->buf.tail != NULL)
-		t->buf.tail->commit = t->buf.tail->used;
-	spin_unlock_irqrestore(&t->buf.lock, flags);
-	schedule_work(&t->buf.work);
-}
-
 #endif
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index 42d9e863a313..7f6fe6e015bc 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -13,6 +13,14 @@
  * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
  */
 
+typedef enum {
+	KDB_REPEAT_NONE = 0,	/* Do not repeat this command */
+	KDB_REPEAT_NO_ARGS,	/* Repeat the command without arguments */
+	KDB_REPEAT_WITH_ARGS,	/* Repeat the command including its arguments */
+} kdb_repeat_t;
+
+typedef int (*kdb_func_t)(int, const char **);
+
 #ifdef	CONFIG_KGDB_KDB
 #include <linux/init.h>
 #include <linux/sched.h>
@@ -32,14 +40,6 @@ extern atomic_t kdb_event;
 
 #define KDB_MAXARGS    16 /* Maximum number of arguments to a function  */
 
-typedef enum {
-	KDB_REPEAT_NONE = 0,	/* Do not repeat this command */
-	KDB_REPEAT_NO_ARGS,	/* Repeat the command without arguments */
-	KDB_REPEAT_WITH_ARGS,	/* Repeat the command including its arguments */
-} kdb_repeat_t;
-
-typedef int (*kdb_func_t)(int, const char **);
-
 /* KDB return codes from a command or internal kdb function */
 #define KDB_NOTFOUND	(-1)
 #define KDB_ARGCOUNT	(-2)
@@ -149,11 +149,14 @@ extern int kdb_register_repeat(char *, kdb_func_t, char *, char *,
 			       short, kdb_repeat_t);
 extern int kdb_unregister(char *);
 #else /* ! CONFIG_KGDB_KDB */
-#define kdb_printf(...)
-#define kdb_init(x)
-#define kdb_register(...)
-#define kdb_register_repeat(...)
-#define kdb_uregister(x)
+static inline __printf(1, 2) int kdb_printf(const char *fmt, ...) { return 0; }
+static inline void kdb_init(int level) {}
+static inline int kdb_register(char *cmd, kdb_func_t func, char *usage,
+			       char *help, short minlen) { return 0; }
+static inline int kdb_register_repeat(char *cmd, kdb_func_t func, char *usage,
+				      char *help, short minlen,
+				      kdb_repeat_t repeat) { return 0; }
+static inline int kdb_unregister(char *cmd) { return 0; }
 #endif	/* CONFIG_KGDB_KDB */
 enum {
 	KDB_NOT_INITIALIZED,
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index c4d2fc194ede..4dff0c6ed58f 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -240,6 +240,7 @@ extern void kgdb_arch_late(void);
  * hardware breakpoints.
  * @correct_hw_break: Allow an architecture to specify how to correct the
  * hardware debug registers.
+ * @enable_nmi: Manage NMI-triggered entry to KGDB
  */
 struct kgdb_arch {
 	unsigned char		gdb_bpt_instr[BREAK_INSTR_SIZE];
@@ -252,6 +253,8 @@ struct kgdb_arch {
 	void	(*disable_hw_break)(struct pt_regs *regs);
 	void	(*remove_all_hw_break)(void);
 	void	(*correct_hw_break)(void);
+
+	void	(*enable_nmi)(bool on);
 };
 
 /**
@@ -283,6 +286,16 @@ extern struct kgdb_arch		arch_kgdb_ops;
 
 extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
 
+#ifdef CONFIG_SERIAL_KGDB_NMI
+extern int kgdb_register_nmi_console(void);
+extern int kgdb_unregister_nmi_console(void);
+extern bool kgdb_nmi_poll_knock(void);
+#else
+static inline int kgdb_register_nmi_console(void) { return 0; }
+static inline int kgdb_unregister_nmi_console(void) { return 0; }
+static inline bool kgdb_nmi_poll_knock(void) { return 1; }
+#endif
+
 extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
 extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
 extern struct kgdb_io *dbg_io_ops;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6b4565c440c8..8d3c42719387 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1847,7 +1847,6 @@
 #define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
 #define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
 
 #define PCI_VENDOR_ID_RADISYS		0x1331
 
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
new file mode 100644
index 000000000000..91648bf5fc5c
--- /dev/null
+++ b/include/linux/platform_data/max310x.h
@@ -0,0 +1,67 @@
+/*
+ *  Maxim (Dallas) MAX3107/8 serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ *  Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ *  Based on max3107.c, by Aavamobile
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef _MAX310X_H_
+#define _MAX310X_H_
+
+/*
+ * Example board initialization data:
+ *
+ * static struct max310x_pdata max3107_pdata = {
+ *	.driver_flags	= MAX310X_EXT_CLK,
+ *	.uart_flags[0]	= MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
+ *	.frequency	= 3686400,
+ *	.gpio_base	= -1,
+ * };
+ *
+ * static struct spi_board_info spi_device_max3107[] = {
+ *	{
+ *		.modalias	= "max3107",
+ *		.irq		= IRQ_EINT3,
+ *		.bus_num	= 1,
+ *		.chip_select	= 1,
+ *		.platform_data	= &max3107_pdata,
+ *	},
+ * };
+ */
+
+#define MAX310X_MAX_UARTS	1
+
+/* MAX310X platform data structure */
+struct max310x_pdata {
+	/* Flags global to driver */
+	const u8		driver_flags:2;
+#define MAX310X_EXT_CLK		(0x00000001)	/* External clock enable */
+#define MAX310X_AUTOSLEEP	(0x00000002)	/* Enable AutoSleep mode */
+	/* Flags global to UART port */
+	const u8		uart_flags[MAX310X_MAX_UARTS];
+#define MAX310X_LOOPBACK	(0x00000001)	/* Loopback mode enable */
+#define MAX310X_ECHO_SUPRESS	(0x00000002)	/* Enable echo supress */
+#define MAX310X_AUTO_DIR_CTRL	(0x00000004)	/* Enable Auto direction
+						 * control (RS-485)
+						 */
+	/* Frequency (extrenal clock or crystal) */
+	const int		frequency;
+	/* GPIO base number (can be negative) */
+	const int		gpio_base;
+	/* Called during startup */
+	void (*init)(void);
+	/* Called before finish */
+	void (*exit)(void);
+	/* Suspend callback */
+	void (*suspend)(int do_suspend);
+};
+
+#endif
diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h
new file mode 100644
index 000000000000..7311ccd3217f
--- /dev/null
+++ b/include/linux/platform_data/sccnxp.h
@@ -0,0 +1,93 @@
+/*
+ *  NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef __SCCNXP_H
+#define __SCCNXP_H
+
+#define SCCNXP_MAX_UARTS	2
+
+/* Output lines */
+#define LINE_OP0		1
+#define LINE_OP1		2
+#define LINE_OP2		3
+#define LINE_OP3		4
+#define LINE_OP4		5
+#define LINE_OP5		6
+#define LINE_OP6		7
+#define LINE_OP7		8
+
+/* Input lines */
+#define LINE_IP0		9
+#define LINE_IP1		10
+#define LINE_IP2		11
+#define LINE_IP3		12
+#define LINE_IP4		13
+#define LINE_IP5		14
+#define LINE_IP6		15
+
+/* Signals */
+#define DTR_OP			0	/* DTR */
+#define RTS_OP			4	/* RTS */
+#define DSR_IP			8	/* DSR */
+#define CTS_IP			12	/* CTS */
+#define DCD_IP			16	/* DCD */
+#define RNG_IP			20	/* RNG */
+
+#define DIR_OP			24	/* Special signal for control RS-485.
+					 * Goes high when transmit,
+					 * then goes low.
+					 */
+
+/* Routing control signal 'sig' to line 'line' */
+#define MCTRL_SIG(sig, line)	((line) << (sig))
+
+/*
+ * Example board initialization data:
+ *
+ * static struct resource sc2892_resources[] = {
+ *	DEFINE_RES_MEM(UART_PHYS_START, 0x10),
+ *	DEFINE_RES_IRQ(IRQ_EXT2),
+ * };
+ *
+ * static struct sccnxp_pdata sc2892_info = {
+ *	.frequency	= 3686400,
+ *	.mctrl_cfg[0]	= MCTRL_SIG(DIR_OP, LINE_OP0),
+ *	.mctrl_cfg[1]	= MCTRL_SIG(DIR_OP, LINE_OP1),
+ * };
+ *
+ * static struct platform_device sc2892 = {
+ *	.name		= "sc2892",
+ *	.id		= -1,
+ *	.resource	= sc2892_resources,
+ *	.num_resources	= ARRAY_SIZE(sc2892_resources),
+ *	.dev = {
+ *		.platform_data	= &sc2892_info,
+ *	},
+ * };
+ */
+
+/* SCCNXP platform data structure */
+struct sccnxp_pdata {
+	/* Frequency (extrenal clock or crystal) */
+	int			frequency;
+	/* Shift for A0 line */
+	const u8		reg_shift;
+	/* Modem control lines configuration */
+	const u32		mctrl_cfg[SCCNXP_MAX_UARTS];
+	/* Called during startup */
+	void (*init)(void);
+	/* Called before finish */
+	void (*exit)(void);
+};
+
+#endif
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
deleted file mode 100644
index 7ca35abad387..000000000000
--- a/include/linux/sc26198.h
+++ /dev/null
@@ -1,533 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	sc26198.h  -- SC26198 UART hardware info.
- *
- *	Copyright (C) 1995-1998  Stallion Technologies
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_SC26198_H
-#define	_SC26198_H
-/*****************************************************************************/
-
-/*
- *	Define the number of async ports per sc26198 uart device.
- */
-#define	SC26198_PORTS		8
-
-/*
- *	Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
- */
-#define	SC26198_MASTERCLOCK	14745600L
-#define	SC26198_DCLK		(SC26198_MASTERCLOCK)
-#define	SC26198_CCLK		(SC26198_MASTERCLOCK / 2)
-#define	SC26198_BCLK		(SC26198_MASTERCLOCK / 4)
-
-/*
- *	Define internal FIFO sizes for the 26198 ports.
- */
-#define	SC26198_TXFIFOSIZE	16
-#define	SC26198_RXFIFOSIZE	16
-
-/*****************************************************************************/
-
-/*
- *	Global register definitions. These registers are global to each 26198
- *	device, not specific ports on it.
- */
-#define	TSTR		0x0d
-#define	GCCR		0x0f
-#define	ICR		0x1b
-#define	WDTRCR		0x1d
-#define	IVR		0x1f
-#define	BRGTRUA		0x84
-#define	GPOSR		0x87
-#define	GPOC		0x8b
-#define	UCIR		0x8c
-#define	CIR		0x8c
-#define	BRGTRUB		0x8d
-#define	GRXFIFO		0x8e
-#define	GTXFIFO		0x8e
-#define	GCCR2		0x8f
-#define	BRGTRLA		0x94
-#define	GPOR		0x97
-#define	GPOD		0x9b
-#define	BRGTCR		0x9c
-#define	GICR		0x9c
-#define	BRGTRLB		0x9d
-#define	GIBCR		0x9d
-#define	GITR		0x9f
-
-/*
- *	Per port channel registers. These are the register offsets within
- *	the port address space, so need to have the port address (0 to 7)
- *	inserted in bit positions 4:6.
- */
-#define	MR0		0x00
-#define	MR1		0x01
-#define	IOPCR		0x02
-#define	BCRBRK		0x03
-#define	BCRCOS		0x04
-#define	BCRX		0x06
-#define	BCRA		0x07
-#define	XONCR		0x08
-#define	XOFFCR		0x09
-#define	ARCR		0x0a
-#define	RXCSR		0x0c
-#define	TXCSR		0x0e
-#define	MR2		0x80
-#define	SR		0x81
-#define SCCR		0x81
-#define	ISR		0x82
-#define	IMR		0x82
-#define	TXFIFO		0x83
-#define	RXFIFO		0x83
-#define	IPR		0x84
-#define	IOPIOR		0x85
-#define	XISR		0x86
-
-/*
- *	For any given port calculate the address to use to access a specified
- *	register. This is only used for unusual access, mostly this is done
- *	through the assembler access routines.
- */
-#define	SC26198_PORTREG(port,reg)	((((port) & 0x07) << 4) | (reg))
-
-/*****************************************************************************/
-
-/*
- *	Global configuration control register bit definitions.
- */
-#define	GCCR_NOACK		0x00
-#define	GCCR_IVRACK		0x02
-#define	GCCR_IVRCHANACK		0x04
-#define	GCCR_IVRTYPCHANACK	0x06
-#define	GCCR_ASYNCCYCLE		0x00
-#define	GCCR_SYNCCYCLE		0x40
-
-/*****************************************************************************/
-
-/*
- *	Mode register 0 bit definitions.
- */
-#define	MR0_ADDRNONE		0x00
-#define	MR0_AUTOWAKE		0x01
-#define	MR0_AUTODOZE		0x02
-#define	MR0_AUTOWAKEDOZE	0x03
-#define	MR0_SWFNONE		0x00
-#define	MR0_SWFTX		0x04
-#define	MR0_SWFRX		0x08
-#define	MR0_SWFRXTX		0x0c
-#define	MR0_TXMASK		0x30
-#define	MR0_TXEMPTY		0x00
-#define	MR0_TXHIGH		0x10
-#define	MR0_TXHALF		0x20
-#define	MR0_TXRDY		0x00
-#define	MR0_ADDRNT		0x00
-#define	MR0_ADDRT		0x40
-#define	MR0_SWFNT		0x00
-#define	MR0_SWFT		0x80
-
-/*
- *	Mode register 1 bit definitions.
- */
-#define	MR1_CS5			0x00
-#define	MR1_CS6			0x01
-#define	MR1_CS7			0x02
-#define	MR1_CS8			0x03
-#define	MR1_PAREVEN		0x00
-#define	MR1_PARODD		0x04
-#define	MR1_PARENB		0x00
-#define	MR1_PARFORCE		0x08
-#define	MR1_PARNONE		0x10
-#define	MR1_PARSPECIAL		0x18
-#define	MR1_ERRCHAR		0x00
-#define	MR1_ERRBLOCK		0x20
-#define	MR1_ISRUNMASKED		0x00
-#define	MR1_ISRMASKED		0x40
-#define	MR1_AUTORTS		0x80
-
-/*
- *	Mode register 2 bit definitions.
- */
-#define	MR2_STOP1		0x00
-#define	MR2_STOP15		0x01
-#define	MR2_STOP2		0x02
-#define	MR2_STOP916		0x03
-#define	MR2_RXFIFORDY		0x00
-#define	MR2_RXFIFOHALF		0x04
-#define	MR2_RXFIFOHIGH		0x08
-#define	MR2_RXFIFOFULL		0x0c
-#define	MR2_AUTOCTS		0x10
-#define	MR2_TXRTS		0x20
-#define	MR2_MODENORM		0x00
-#define	MR2_MODEAUTOECHO	0x40
-#define	MR2_MODELOOP		0x80
-#define	MR2_MODEREMECHO		0xc0
-
-/*****************************************************************************/
-
-/*
- *	Baud Rate Generator (BRG) selector values.
- */
-#define	BRG_50			0x00
-#define	BRG_75			0x01
-#define	BRG_150			0x02
-#define	BRG_200			0x03
-#define	BRG_300			0x04
-#define	BRG_450			0x05
-#define	BRG_600			0x06
-#define	BRG_900			0x07
-#define	BRG_1200		0x08
-#define	BRG_1800		0x09
-#define	BRG_2400		0x0a
-#define	BRG_3600		0x0b
-#define	BRG_4800		0x0c
-#define	BRG_7200		0x0d
-#define	BRG_9600		0x0e
-#define	BRG_14400		0x0f
-#define	BRG_19200		0x10
-#define	BRG_28200		0x11
-#define	BRG_38400		0x12
-#define	BRG_57600		0x13
-#define	BRG_115200		0x14
-#define	BRG_230400		0x15
-#define	BRG_GIN0		0x16
-#define	BRG_GIN1		0x17
-#define	BRG_CT0			0x18
-#define	BRG_CT1			0x19
-#define	BRG_RX2TX316		0x1b
-#define	BRG_RX2TX31		0x1c
-
-#define	SC26198_MAXBAUD		921600
-
-/*****************************************************************************/
-
-/*
- *	Command register command definitions.
- */
-#define	CR_NULL			0x04
-#define	CR_ADDRNORMAL		0x0c
-#define	CR_RXRESET		0x14
-#define	CR_TXRESET		0x1c
-#define	CR_CLEARRXERR		0x24
-#define	CR_BREAKRESET		0x2c
-#define	CR_TXSTARTBREAK		0x34
-#define	CR_TXSTOPBREAK		0x3c
-#define	CR_RTSON		0x44
-#define	CR_RTSOFF		0x4c
-#define	CR_ADDRINIT		0x5c
-#define	CR_RXERRBLOCK		0x6c
-#define	CR_TXSENDXON		0x84
-#define	CR_TXSENDXOFF		0x8c
-#define	CR_GANGXONSET		0x94
-#define	CR_GANGXOFFSET		0x9c
-#define	CR_GANGXONINIT		0xa4
-#define	CR_GANGXOFFINIT		0xac
-#define	CR_HOSTXON		0xb4
-#define	CR_HOSTXOFF		0xbc
-#define	CR_CANCELXOFF		0xc4
-#define	CR_ADDRRESET		0xdc
-#define	CR_RESETALLPORTS	0xf4
-#define	CR_RESETALL		0xfc
-
-#define	CR_RXENABLE		0x01
-#define	CR_TXENABLE		0x02
-
-/*****************************************************************************/
-
-/*
- *	Channel status register.
- */
-#define	SR_RXRDY		0x01
-#define	SR_RXFULL		0x02
-#define	SR_TXRDY		0x04
-#define	SR_TXEMPTY		0x08
-#define	SR_RXOVERRUN		0x10
-#define	SR_RXPARITY		0x20
-#define	SR_RXFRAMING		0x40
-#define	SR_RXBREAK		0x80
-
-#define	SR_RXERRS		(SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
-
-/*****************************************************************************/
-
-/*
- *	Interrupt status register and interrupt mask register bit definitions.
- */
-#define	IR_TXRDY		0x01
-#define	IR_RXRDY		0x02
-#define	IR_RXBREAK		0x04
-#define	IR_XONXOFF		0x10
-#define	IR_ADDRRECOG		0x20
-#define	IR_RXWATCHDOG		0x40
-#define	IR_IOPORT		0x80
-
-/*****************************************************************************/
-
-/*
- *	Interrupt vector register field definitions.
- */
-#define	IVR_CHANMASK		0x07
-#define	IVR_TYPEMASK		0x18
-#define	IVR_CONSTMASK		0xc0
-
-#define	IVR_RXDATA		0x10
-#define	IVR_RXBADDATA		0x18
-#define	IVR_TXDATA		0x08
-#define	IVR_OTHER		0x00
-
-/*****************************************************************************/
-
-/*
- *	BRG timer control register bit definitions.
- */
-#define	BRGCTCR_DISABCLK0	0x00
-#define	BRGCTCR_ENABCLK0	0x08
-#define	BRGCTCR_DISABCLK1	0x00
-#define	BRGCTCR_ENABCLK1	0x80
-
-#define	BRGCTCR_0SCLK16		0x00
-#define	BRGCTCR_0SCLK32		0x01
-#define	BRGCTCR_0SCLK64		0x02
-#define	BRGCTCR_0SCLK128	0x03
-#define	BRGCTCR_0X1		0x04
-#define	BRGCTCR_0X12		0x05
-#define	BRGCTCR_0IO1A		0x06
-#define	BRGCTCR_0GIN0		0x07
-
-#define	BRGCTCR_1SCLK16		0x00
-#define	BRGCTCR_1SCLK32		0x10
-#define	BRGCTCR_1SCLK64		0x20
-#define	BRGCTCR_1SCLK128	0x30
-#define	BRGCTCR_1X1		0x40
-#define	BRGCTCR_1X12		0x50
-#define	BRGCTCR_1IO1B		0x60
-#define	BRGCTCR_1GIN1		0x70
-
-/*****************************************************************************/
-
-/*
- *	Watch dog timer enable register.
- */
-#define	WDTRCR_ENABALL		0xff
-
-/*****************************************************************************/
-
-/*
- *	XON/XOFF interrupt status register.
- */
-#define	XISR_TXCHARMASK		0x03
-#define	XISR_TXCHARNORMAL	0x00
-#define	XISR_TXWAIT		0x01
-#define	XISR_TXXOFFPEND		0x02
-#define	XISR_TXXONPEND		0x03
-
-#define	XISR_TXFLOWMASK		0x0c
-#define	XISR_TXNORMAL		0x00
-#define	XISR_TXSTOPPEND		0x04
-#define	XISR_TXSTARTED		0x08
-#define	XISR_TXSTOPPED		0x0c
-
-#define	XISR_RXFLOWMASK		0x30
-#define	XISR_RXFLOWNONE		0x00
-#define	XISR_RXXONSENT		0x10
-#define	XISR_RXXOFFSENT		0x20
-
-#define	XISR_RXXONGOT		0x40
-#define	XISR_RXXOFFGOT		0x80
-
-/*****************************************************************************/
-
-/*
- *	Current interrupt register.
- */
-#define	CIR_TYPEMASK		0xc0
-#define	CIR_TYPEOTHER		0x00
-#define	CIR_TYPETX		0x40
-#define	CIR_TYPERXGOOD		0x80
-#define	CIR_TYPERXBAD		0xc0
-
-#define	CIR_RXDATA		0x80
-#define	CIR_RXBADDATA		0x40
-#define	CIR_TXDATA		0x40
-
-#define	CIR_CHANMASK		0x07
-#define	CIR_CNTMASK		0x38
-
-#define	CIR_SUBTYPEMASK		0x38
-#define	CIR_SUBNONE		0x00
-#define	CIR_SUBCOS		0x08
-#define	CIR_SUBADDR		0x10
-#define	CIR_SUBXONXOFF		0x18
-#define	CIR_SUBBREAK		0x28
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting channel register.
- */
-#define	GICR_CHANMASK		0x07
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting byte count register.
- */
-#define	GICR_COUNTMASK		0x0f
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting type register.
- */
-#define	GITR_RXMASK		0xc0
-#define	GITR_RXNONE		0x00
-#define	GITR_RXBADDATA		0x80
-#define	GITR_RXGOODDATA		0xc0
-#define	GITR_TXDATA		0x20
-
-#define	GITR_SUBTYPEMASK	0x07
-#define	GITR_SUBNONE		0x00
-#define	GITR_SUBCOS		0x01
-#define	GITR_SUBADDR		0x02
-#define	GITR_SUBXONXOFF		0x03
-#define	GITR_SUBBREAK		0x05
-
-/*****************************************************************************/
-
-/*
- *	Input port change register.
- */
-#define	IPR_CTS			0x01
-#define	IPR_DTR			0x02
-#define	IPR_RTS			0x04
-#define	IPR_DCD			0x08
-#define	IPR_CTSCHANGE		0x10
-#define	IPR_DTRCHANGE		0x20
-#define	IPR_RTSCHANGE		0x40
-#define	IPR_DCDCHANGE		0x80
-
-#define	IPR_CHANGEMASK		0xf0
-
-/*****************************************************************************/
-
-/*
- *	IO port interrupt and output register.
- */
-#define	IOPR_CTS		0x01
-#define	IOPR_DTR		0x02
-#define	IOPR_RTS		0x04
-#define	IOPR_DCD		0x08
-#define	IOPR_CTSCOS		0x10
-#define	IOPR_DTRCOS		0x20
-#define	IOPR_RTSCOS		0x40
-#define	IOPR_DCDCOS		0x80
-
-/*****************************************************************************/
-
-/*
- *	IO port configuration register.
- */
-#define	IOPCR_SETCTS		0x00
-#define	IOPCR_SETDTR		0x04
-#define	IOPCR_SETRTS		0x10
-#define	IOPCR_SETDCD		0x00
-
-#define	IOPCR_SETSIGS		(IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
-
-/*****************************************************************************/
-
-/*
- *	General purpose output select register.
- */
-#define	GPORS_TXC1XA		0x08
-#define	GPORS_TXC16XA		0x09
-#define	GPORS_RXC16XA		0x0a
-#define	GPORS_TXC16XB		0x0b
-#define	GPORS_GPOR3		0x0c
-#define	GPORS_GPOR2		0x0d
-#define	GPORS_GPOR1		0x0e
-#define	GPORS_GPOR0		0x0f
-
-/*****************************************************************************/
-
-/*
- *	General purpose output register.
- */
-#define	GPOR_0			0x01
-#define	GPOR_1			0x02
-#define	GPOR_2			0x04
-#define	GPOR_3			0x08
-
-/*****************************************************************************/
-
-/*
- *	General purpose output clock register.
- */
-#define	GPORC_0NONE		0x00
-#define	GPORC_0GIN0		0x01
-#define	GPORC_0GIN1		0x02
-#define	GPORC_0IO3A		0x02
-
-#define	GPORC_1NONE		0x00
-#define	GPORC_1GIN0		0x04
-#define	GPORC_1GIN1		0x08
-#define	GPORC_1IO3C		0x0c
-
-#define	GPORC_2NONE		0x00
-#define	GPORC_2GIN0		0x10
-#define	GPORC_2GIN1		0x20
-#define	GPORC_2IO3E		0x20
-
-#define	GPORC_3NONE		0x00
-#define	GPORC_3GIN0		0x40
-#define	GPORC_3GIN1		0x80
-#define	GPORC_3IO3G		0xc0
-
-/*****************************************************************************/
-
-/*
- *	General purpose output data register.
- */
-#define	GPOD_0MASK		0x03
-#define	GPOD_0SET1		0x00
-#define	GPOD_0SET0		0x01
-#define	GPOD_0SETR0		0x02
-#define	GPOD_0SETIO3B		0x03
-
-#define	GPOD_1MASK		0x0c
-#define	GPOD_1SET1		0x00
-#define	GPOD_1SET0		0x04
-#define	GPOD_1SETR0		0x08
-#define	GPOD_1SETIO3D		0x0c
-
-#define	GPOD_2MASK		0x30
-#define	GPOD_2SET1		0x00
-#define	GPOD_2SET0		0x10
-#define	GPOD_2SETR0		0x20
-#define	GPOD_2SETIO3F		0x30
-
-#define	GPOD_3MASK		0xc0
-#define	GPOD_3SET1		0x00
-#define	GPOD_3SET0		0x40
-#define	GPOD_3SETR0		0x80
-#define	GPOD_3SETIO3H		0xc0
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f981358a..861e51de476b 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
 
 #include <linux/types.h>
 
+#include <linux/tty_flags.h>
+
 #ifdef __KERNEL__
 #include <asm/page.h>
 
+
 /*
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
@@ -83,89 +86,11 @@ struct serial_struct {
 #define SERIAL_IO_HUB6	1
 #define SERIAL_IO_MEM	2
 
-struct serial_uart_config {
-	char	*name;
-	int	dfl_xmit_fifo_size;
-	int	flags;
-};
-
 #define UART_CLEAR_FIFO		0x01
 #define UART_USE_FIFO		0x02
 #define UART_STARTECH		0x04
 #define UART_NATSEMI		0x08
 
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
-				    * on the callout port */
-#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
-				    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
-				    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER	15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING		27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
-#define ASYNCB_FIRST_KERNEL	22
-
-#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK		(1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-		ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
deleted file mode 100644
index 59c81b708562..000000000000
--- a/include/linux/serial167.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * serial167.h
- *
- * Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on cyclades.h
- */
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
-	int                     magic;
-	int                     type;
-	int			card;
-	int			line;
-	int			flags; 		/* defined in tty.h */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int                     cor1,cor2,cor3,cor4,cor5,cor6,cor7;
-	int                     tbpr,tco,rbpr,rco;
-	int			ignore_status_mask;
-	int			close_delay;
-	int			IER; 	/* Interrupt Enable Register */
-	unsigned long		last_active;
-	int			count;	/* # of fd on device */
-	int                     x_char; /* to be pushed out ASAP */
-	int                     x_break;
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-        int                     default_threshold;
-        int                     default_timeout;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-        struct cyclades_monitor mon;
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-
-#define CyMaxChipsPerCard 1
-
-/**** cd2401 registers ****/
-
-#define CyGFRCR         (0x81)
-#define CyCCR		(0x13)
-#define      CyCLR_CHAN		(0x40)
-#define      CyINIT_CHAN	(0x20)
-#define      CyCHIP_RESET	(0x10)
-#define      CyENB_XMTR		(0x08)
-#define      CyDIS_XMTR		(0x04)
-#define      CyENB_RCVR		(0x02)
-#define      CyDIS_RCVR		(0x01)
-#define CyCAR		(0xee)
-#define CyIER		(0x11)
-#define      CyMdmCh		(0x80)
-#define      CyRxExc		(0x20)
-#define      CyRxData		(0x08)
-#define      CyTxMpty		(0x02)
-#define      CyTxRdy		(0x01)
-#define CyLICR		(0x26)
-#define CyRISR		(0x89)
-#define      CyTIMEOUT		(0x80)
-#define      CySPECHAR		(0x70)
-#define      CyOVERRUN		(0x08)
-#define      CyPARITY		(0x04)
-#define      CyFRAME		(0x02)
-#define      CyBREAK		(0x01)
-#define CyREOIR		(0x84)
-#define CyTEOIR		(0x85)
-#define CyMEOIR		(0x86)
-#define      CyNOTRANS		(0x08)
-#define CyRFOC		(0x30)
-#define CyRDR		(0xf8)
-#define CyTDR		(0xf8)
-#define CyMISR		(0x8b)
-#define CyRISR		(0x89)
-#define CyTISR		(0x8a)
-#define CyMSVR1		(0xde)
-#define CyMSVR2		(0xdf)
-#define      CyDSR		(0x80)
-#define      CyDCD		(0x40)
-#define      CyCTS		(0x20)
-#define      CyDTR		(0x02)
-#define      CyRTS		(0x01)
-#define CyRTPRL		(0x25)
-#define CyRTPRH		(0x24)
-#define CyCOR1		(0x10)
-#define      CyPARITY_NONE	(0x00)
-#define      CyPARITY_E		(0x40)
-#define      CyPARITY_O		(0xC0)
-#define      Cy_5_BITS		(0x04)
-#define      Cy_6_BITS		(0x05)
-#define      Cy_7_BITS		(0x06)
-#define      Cy_8_BITS		(0x07)
-#define CyCOR2		(0x17)
-#define      CyETC		(0x20)
-#define      CyCtsAE		(0x02)
-#define CyCOR3		(0x16)
-#define      Cy_1_STOP		(0x02)
-#define      Cy_2_STOP		(0x04)
-#define CyCOR4		(0x15)
-#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
-#define CyCOR5		(0x14)
-#define CyCOR6		(0x18)
-#define CyCOR7		(0x07)
-#define CyRBPR		(0xcb)
-#define CyRCOR		(0xc8)
-#define CyTBPR		(0xc3)
-#define CyTCOR		(0xc0)
-#define CySCHR1		(0x1f)
-#define CySCHR2 	(0x1e)
-#define CyTPR		(0xda)
-#define CyPILR1		(0xe3)
-#define CyPILR2		(0xe0)
-#define CyPILR3		(0xe1)
-#define CyCMR		(0x1b)
-#define      CyASYNC		(0x02)
-#define CyLICR          (0x26)
-#define CyLIVR          (0x09)
-#define CySCRL		(0x23)
-#define CySCRH		(0x22)
-#define CyTFTC		(0x80)
-
-
-/* max number of chars in the FIFO */
-
-#define CyMAX_CHAR_FIFO	12
-
-/***************************************************************************/
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a416e92012ef..c174c90fb3fb 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -65,11 +65,38 @@ enum {
  * platform device.  Using these will make your driver
  * dependent on the 8250 driver.
  */
-struct uart_port;
-struct uart_8250_port;
+
+struct uart_8250_port {
+	struct uart_port	port;
+	struct timer_list	timer;		/* "no irq" timer */
+	struct list_head	list;		/* ports on this IRQ */
+	unsigned short		capabilities;	/* port capabilities */
+	unsigned short		bugs;		/* port bugs */
+	unsigned int		tx_loadsz;	/* transmit fifo load size */
+	unsigned char		acr;
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		mcr_mask;	/* mask of user bits */
+	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		cur_iotype;	/* Running I/O type */
+
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+	unsigned char		lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+	unsigned char		msr_saved_flags;
+
+	/* 8250 specific callbacks */
+	int			(*dl_read)(struct uart_8250_port *);
+	void			(*dl_write)(struct uart_8250_port *, int);
+};
 
 int serial8250_register_8250_port(struct uart_8250_port *);
-int serial8250_register_port(struct uart_port *);
 void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 0253c2022e53..f9b22ec7a9f3 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -48,7 +48,8 @@
 #define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
 #define PORT_XR17D15X	21	/* Exar XR17D15x UART */
 #define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
-#define PORT_MAX_8250	22	/* max port ID */
+#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
+#define PORT_MAX_8250	23	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -193,8 +194,8 @@
 /* SH-SCI */
 #define PORT_SCIFB	93
 
-/* MAX3107 */
-#define PORT_MAX3107	94
+/* MAX310X */
+#define PORT_MAX310X	94
 
 /* High Speed UART for Medfield */
 #define PORT_MFD	95
@@ -274,6 +275,7 @@ struct uart_ops {
 	int		(*verify_port)(struct uart_port *, struct serial_struct *);
 	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
 #ifdef CONFIG_CONSOLE_POLL
+	int		(*poll_init)(struct uart_port *);
 	void	(*poll_put_char)(struct uart_port *, unsigned char);
 	int		(*poll_get_char)(struct uart_port *);
 #endif
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 8ce70d76f836..5ed325e88a81 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -40,6 +40,10 @@
 
 #define UART_IIR_BUSY		0x07 /* DesignWare APB Busy Detect */
 
+#define UART_IIR_RX_TIMEOUT	0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF		0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR	0x20 /* OMAP CTS/RTS/DSR Change */
+
 #define UART_FCR	2	/* Out: FIFO Control Register */
 #define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
 #define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
deleted file mode 100644
index 336af33c6ea4..000000000000
--- a/include/linux/stallion.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	stallion.h  -- stallion multiport serial driver.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_STALLION_H
-#define	_STALLION_H
-/*****************************************************************************/
-
-/*
- *	Define important driver constants here.
- */
-#define	STL_MAXBRDS		4
-#define	STL_MAXPANELS		4
-#define	STL_MAXBANKS		8
-#define	STL_PORTSPERPANEL	16
-#define	STL_MAXPORTS		64
-#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *	Define a set of structures to hold all the board/panel/port info
- *	for our ports. These will be dynamically allocated as required.
- */
-
-/*
- *	Define a ring queue structure for each port. This will hold the
- *	TX data waiting to be output. Characters are fed into this buffer
- *	from the line discipline (or even direct from user space!) and
- *	then fed into the UARTs during interrupts. Will use a classic ring
- *	queue here for this. The good thing about this type of ring queue
- *	is that the head and tail pointers can be updated without interrupt
- *	protection - since "write" code only needs to change the head, and
- *	interrupt code only needs to change the tail.
- */
-struct stlrq {
-	char	*buf;
-	char	*head;
-	char	*tail;
-};
-
-/*
- *	Port, panel and board structures to hold status info about each.
- *	The board structure contains pointers to structures for each panel
- *	connected to it, and in turn each panel structure contains pointers
- *	for each port structure for each port on that panel. Note that
- *	the port structure also contains the board and panel number that it
- *	is associated with, this makes it (fairly) easy to get back to the
- *	board/panel info for a port.
- */
-struct stlport {
-	unsigned long		magic;
-	struct tty_port		port;
-	unsigned int		portnr;
-	unsigned int		panelnr;
-	unsigned int		brdnr;
-	int			ioaddr;
-	int			uartaddr;
-	unsigned int		pagenr;
-	unsigned long		istate;
-	int			baud_base;
-	int			custom_divisor;
-	int			close_delay;
-	int			closing_wait;
-	int			openwaitcnt;
-	int			brklen;
-	unsigned int		sigs;
-	unsigned int		rxignoremsk;
-	unsigned int		rxmarkmsk;
-	unsigned int		imr;
-	unsigned int		crenable;
-	unsigned long		clk;
-	unsigned long		hwid;
-	void			*uartp;
-	comstats_t		stats;
-	struct stlrq		tx;
-};
-
-struct stlpanel {
-	unsigned long	magic;
-	unsigned int	panelnr;
-	unsigned int	brdnr;
-	unsigned int	pagenr;
-	unsigned int	nrports;
-	int		iobase;
-	void		*uartp;
-	void		(*isr)(struct stlpanel *panelp, unsigned int iobase);
-	unsigned int	hwid;
-	unsigned int	ackmask;
-	struct stlport	*ports[STL_PORTSPERPANEL];
-};
-
-struct stlbrd {
-	unsigned long	magic;
-	unsigned int	brdnr;
-	unsigned int	brdtype;
-	unsigned int	state;
-	unsigned int	nrpanels;
-	unsigned int	nrports;
-	unsigned int	nrbnks;
-	int		irq;
-	int		irqtype;
-	int		(*isr)(struct stlbrd *brdp);
-	unsigned int	ioaddr1;
-	unsigned int	ioaddr2;
-	unsigned int	iosize1;
-	unsigned int	iosize2;
-	unsigned int	iostatus;
-	unsigned int	ioctrl;
-	unsigned int	ioctrlval;
-	unsigned int	hwid;
-	unsigned long	clk;
-	unsigned int	bnkpageaddr[STL_MAXBANKS];
-	unsigned int	bnkstataddr[STL_MAXBANKS];
-	struct stlpanel	*bnk2panel[STL_MAXBANKS];
-	struct stlpanel	*panels[STL_MAXPANELS];
-};
-
-
-/*
- *	Define MAGIC numbers used for above structures.
- */
-#define	STL_PORTMAGIC	0x5a7182c9
-#define	STL_PANELMAGIC	0x7ef621a1
-#define	STL_BOARDMAGIC	0xa2267f52
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab540f65..1509b86825d8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
+#include <linux/tty_flags.h>
 
 
 
@@ -103,28 +104,28 @@ struct tty_bufhead {
 #define TTY_PARITY	3
 #define TTY_OVERRUN	4
 
-#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
-#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
-#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
-#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
-#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
-#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
-#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
-#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
-#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
-#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
-#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
-#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
-#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
-#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
-#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
-#define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
-#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-
-#define _I_FLAG(tty, f)	((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty, f)	((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty, f)	((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty, f)	((tty)->termios->c_lflag & (f))
+#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
+#define LNEXT_CHAR(tty)	((tty)->termios.c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
+
+#define _I_FLAG(tty, f)	((tty)->termios.c_iflag & (f))
+#define _O_FLAG(tty, f)	((tty)->termios.c_oflag & (f))
+#define _C_FLAG(tty, f)	((tty)->termios.c_cflag & (f))
+#define _L_FLAG(tty, f)	((tty)->termios.c_lflag & (f))
 
 #define I_IGNBRK(tty)	_I_FLAG((tty), IGNBRK)
 #define I_BRKINT(tty)	_I_FLAG((tty), BRKINT)
@@ -268,10 +269,11 @@ struct tty_struct {
 	struct mutex ldisc_mutex;
 	struct tty_ldisc *ldisc;
 
+	struct mutex legacy_mutex;
 	struct mutex termios_mutex;
 	spinlock_t ctrl_lock;
 	/* Termios values are protected by the termios mutex */
-	struct ktermios *termios, *termios_locked;
+	struct ktermios termios, termios_locked;
 	struct termiox *termiox;	/* May be NULL for unsupported */
 	char name[64];
 	struct pid *pgrp;		/* Protected by ctrl lock */
@@ -410,6 +412,10 @@ extern int tty_register_driver(struct tty_driver *driver);
 extern int tty_unregister_driver(struct tty_driver *driver);
 extern struct device *tty_register_device(struct tty_driver *driver,
 					  unsigned index, struct device *dev);
+extern struct device *tty_register_device_attr(struct tty_driver *driver,
+				unsigned index, struct device *device,
+				void *drvdata,
+				const struct attribute_group **attr_grp);
 extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
 			     int buflen);
@@ -423,7 +429,6 @@ extern void tty_unthrottle(struct tty_struct *tty);
 extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
 extern void tty_driver_remove_tty(struct tty_driver *driver,
 				  struct tty_struct *tty);
-extern void tty_shutdown(struct tty_struct *tty);
 extern void tty_free_termios(struct tty_struct *tty);
 extern int is_current_pgrp_orphaned(void);
 extern struct pid *tty_get_pgrp(struct tty_struct *tty);
@@ -497,6 +502,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
 #define tty_is_writelocked(tty)  (mutex_is_locked(&tty->atomic_write_lock))
 
 extern void tty_port_init(struct tty_port *port);
+extern void tty_port_link_device(struct tty_port *port,
+		struct tty_driver *driver, unsigned index);
+extern struct device *tty_port_register_device(struct tty_port *port,
+		struct tty_driver *driver, unsigned index,
+		struct device *device);
+extern struct device *tty_port_register_device_attr(struct tty_port *port,
+		struct tty_driver *driver, unsigned index,
+		struct device *device, void *drvdata,
+		const struct attribute_group **attr_grp);
 extern int tty_port_alloc_xmit_buf(struct tty_port *port);
 extern void tty_port_free_xmit_buf(struct tty_port *port);
 extern void tty_port_put(struct tty_port *port);
@@ -508,6 +522,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port)
 	return port;
 }
 
+/* If the cts flow control is enabled, return true. */
+static inline bool tty_port_cts_enabled(struct tty_port *port)
+{
+	return port->flags & ASYNC_CTS_FLOW;
+}
+
 extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
@@ -521,6 +541,8 @@ extern int tty_port_close_start(struct tty_port *port,
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 extern void tty_port_close(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
+extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+				struct tty_struct *tty);
 extern int tty_port_open(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
 static inline int tty_port_users(struct tty_port *port)
@@ -605,8 +627,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
 
 /* tty_mutex.c */
 /* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+				struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+				struct tty_struct *tty2);
 
 /*
  * this shall be called only from where BTM is held (like close)
@@ -621,9 +647,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock);
 static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
 		long timeout)
 {
-	tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+	tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
 	tty_wait_until_sent(tty, timeout);
-	tty_lock();
+	tty_lock(tty);
 }
 
 /*
@@ -638,16 +664,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
  *
  * Do not use in new code.
  */
-#define wait_event_interruptible_tty(wq, condition)			\
+#define wait_event_interruptible_tty(tty, wq, condition)		\
 ({									\
 	int __ret = 0;							\
 	if (!(condition)) {						\
-		__wait_event_interruptible_tty(wq, condition, __ret);	\
+		__wait_event_interruptible_tty(tty, wq, condition, __ret);	\
 	}								\
 	__ret;								\
 })
 
-#define __wait_event_interruptible_tty(wq, condition, ret)		\
+#define __wait_event_interruptible_tty(tty, wq, condition, ret)		\
 do {									\
 	DEFINE_WAIT(__wait);						\
 									\
@@ -656,9 +682,9 @@ do {									\
 		if (condition)						\
 			break;						\
 		if (!signal_pending(current)) {				\
-			tty_unlock();					\
+			tty_unlock(tty);					\
 			schedule();					\
-			tty_lock();					\
+			tty_lock(tty);					\
 			continue;					\
 		}							\
 		ret = -ERESTARTSYS;					\
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 6e6dbb7447b6..dd976cfb6131 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,14 +45,9 @@
  *
  * void (*shutdown)(struct tty_struct * tty);
  *
- * 	This routine is called synchronously when a particular tty device
- *	is closed for the last time freeing up the resources.
- *	Note that tty_shutdown() is not called if ops->shutdown is defined.
- *	This means one is responsible to take care of calling ops->remove (e.g.
- *	via tty_driver_remove_tty) and releasing tty->termios.
- *	Note that this hook may be called from *all* the contexts where one
- *	uses tty refcounting (e.g. tty_port_tty_get).
- *
+ * 	This routine is called under the tty lock when a particular tty device
+ *	is closed for the last time. It executes before the tty resources
+ *	are freed so may execute while another function holds a tty kref.
  *
  * void (*cleanup)(struct tty_struct * tty);
  *
@@ -294,18 +289,18 @@ struct tty_operations {
 struct tty_driver {
 	int	magic;		/* magic number for this structure */
 	struct kref kref;	/* Reference management */
-	struct cdev cdev;
+	struct cdev *cdevs;
 	struct module	*owner;
 	const char	*driver_name;
 	const char	*name;
 	int	name_base;	/* offset of printed name */
 	int	major;		/* major device number */
 	int	minor_start;	/* start of minor device number */
-	int	num;		/* number of devices allocated */
+	unsigned int	num;	/* number of devices allocated */
 	short	type;		/* type of tty driver */
 	short	subtype;	/* subtype of tty driver */
 	struct ktermios init_termios; /* Initial termios */
-	int	flags;		/* tty driver flags */
+	unsigned long	flags;		/* tty driver flags */
 	struct proc_dir_entry *proc_entry; /* /proc fs entry */
 	struct tty_driver *other; /* only used for the PTY driver */
 
@@ -313,6 +308,7 @@ struct tty_driver {
 	 * Pointer to the tty data structures
 	 */
 	struct tty_struct **ttys;
+	struct tty_port **ports;
 	struct ktermios **termios;
 	void *driver_state;
 
@@ -326,7 +322,8 @@ struct tty_driver {
 
 extern struct list_head tty_drivers;
 
-extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
+extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
+		struct module *owner, unsigned long flags);
 extern void put_tty_driver(struct tty_driver *driver);
 extern void tty_set_operations(struct tty_driver *driver,
 			const struct tty_operations *op);
@@ -334,7 +331,21 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
 
 extern void tty_driver_kref_put(struct tty_driver *driver);
 
-#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+/* Use TTY_DRIVER_* flags below */
+#define tty_alloc_driver(lines, flags) \
+		__tty_alloc_driver(lines, THIS_MODULE, flags)
+
+/*
+ * DEPRECATED Do not use this in new code, use tty_alloc_driver instead.
+ * (And change the return value checks.)
+ */
+static inline struct tty_driver *alloc_tty_driver(unsigned int lines)
+{
+	struct tty_driver *ret = tty_alloc_driver(lines, 0);
+	if (IS_ERR(ret))
+		return NULL;
+	return ret;
+}
 
 static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
 {
@@ -380,6 +391,14 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
  *	the requested timeout to the caller instead of using a simple
  *	on/off interface.
  *
+ * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are
+ *	needed per line for this driver as it would waste memory.
+ *	The driver will take care.
+ *
+ * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In
+ *	other words create /dev/ttyprintk and not /dev/ttyprintk0.
+ *	Applicable only when a driver for a single tty device is
+ *	being allocated.
  */
 #define TTY_DRIVER_INSTALLED		0x0001
 #define TTY_DRIVER_RESET_TERMIOS	0x0002
@@ -387,6 +406,8 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
 #define TTY_DRIVER_DYNAMIC_DEV		0x0008
 #define TTY_DRIVER_DEVPTS_MEM		0x0010
 #define TTY_DRIVER_HARDWARE_BREAK	0x0020
+#define TTY_DRIVER_DYNAMIC_ALLOC	0x0040
+#define TTY_DRIVER_UNNUMBERED_NODE	0x0080
 
 /* tty driver types */
 #define TTY_DRIVER_TYPE_SYSTEM		0x0001
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 000000000000..eefcb483a2c0
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+		ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2012-10-01 23:26:52 +0400
committer	Linus Torvalds <torvalds@linux-foundation.org>	2012-10-01 23:26:52 +0400
commit	3498d13b8090c0b0ef911409fbc503a7c4cca6ef (patch)
tree	254ca00276e863d9fba25707690c66b2a04c49e9 /include/linux
parent	def7cb8cd4e3258db88050eaaca5438bcc3dafca (diff)
parent	0c57dfcc6c1d037243c2f8fbf62eab3633326ec0 (diff)
download	linux-3498d13b8090c0b0ef911409fbc503a7c4cca6ef.tar.xz