Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

7 files changed, 200 insertions, 1 deletions

diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
index b87c1c7c242a..468fdfa643f0 100644
--- a/include/linux/atmel_tc.h
+++ b/include/linux/atmel_tc.h
@@ -67,6 +67,7 @@ struct atmel_tc {
 	const struct atmel_tcb_config *tcb_config;
 	int			irq[3];
 	struct clk		*clk[3];
+	struct clk		*slow_clk;
 	struct list_head	node;
 	bool			allocated;
 };
diff --git a/include/linux/psci.h b/include/linux/psci.h
index a682fcc91c33..12c4865457ad 100644
--- a/include/linux/psci.h
+++ b/include/linux/psci.h
@@ -21,6 +21,8 @@
 #define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
 
 bool psci_tos_resident_on(int cpu);
+bool psci_power_state_loses_context(u32 state);
+bool psci_power_state_is_valid(u32 state);
 
 struct psci_operations {
 	int (*cpu_suspend)(u32 state, unsigned long entry_point);
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 6e7d5ec65838..9e12000914b3 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -23,6 +23,8 @@ struct qcom_scm_hdcp_req {
 	u32 val;
 };
 
+extern bool qcom_scm_is_available(void);
+
 extern bool qcom_scm_hdcp_available(void);
 extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 		u32 *resp);
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
new file mode 100644
index 000000000000..80af3cd35ae4
--- /dev/null
+++ b/include/linux/scpi_protocol.h
@@ -0,0 +1,78 @@
+/*
+ * SCPI Message Protocol driver header
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+
+struct scpi_opp {
+	u32 freq;
+	u32 m_volt;
+} __packed;
+
+struct scpi_dvfs_info {
+	unsigned int count;
+	unsigned int latency; /* in nanoseconds */
+	struct scpi_opp *opps;
+};
+
+enum scpi_sensor_class {
+	TEMPERATURE,
+	VOLTAGE,
+	CURRENT,
+	POWER,
+};
+
+struct scpi_sensor_info {
+	u16 sensor_id;
+	u8 class;
+	u8 trigger_type;
+	char name[20];
+} __packed;
+
+/**
+ * struct scpi_ops - represents the various operations provided
+ *	by SCP through SCPI message protocol
+ * @get_version: returns the major and minor revision on the SCPI
+ *	message protocol
+ * @clk_get_range: gets clock range limit(min - max in Hz)
+ * @clk_get_val: gets clock value(in Hz)
+ * @clk_set_val: sets the clock value, setting to 0 will disable the
+ *	clock (if supported)
+ * @dvfs_get_idx: gets the Operating Point of the given power domain.
+ *	OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_set_idx: sets the Operating Point of the given power domain.
+ *	OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_get_info: returns the DVFS capabilities of the given power
+ *	domain. It includes the OPP list and the latency information
+ */
+struct scpi_ops {
+	u32 (*get_version)(void);
+	int (*clk_get_range)(u16, unsigned long *, unsigned long *);
+	unsigned long (*clk_get_val)(u16);
+	int (*clk_set_val)(u16, unsigned long);
+	int (*dvfs_get_idx)(u8);
+	int (*dvfs_set_idx)(u8, u8);
+	struct scpi_dvfs_info *(*dvfs_get_info)(u8);
+	int (*sensor_get_capability)(u16 *sensors);
+	int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
+	int (*sensor_get_value)(u16, u32 *);
+};
+
+#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL)
+struct scpi_ops *get_scpi_ops(void);
+#else
+static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }
+#endif
diff --git a/include/linux/soc/qcom/smd.h b/include/linux/soc/qcom/smd.h
index d7e50aa6a4ac..d0cb6d189a0a 100644
--- a/include/linux/soc/qcom/smd.h
+++ b/include/linux/soc/qcom/smd.h
@@ -9,6 +9,14 @@ struct qcom_smd_channel;
 struct qcom_smd_lookup;
 
 /**
+ * struct qcom_smd_id - struct used for matching a smd device
+ * @name:	name of the channel
+ */
+struct qcom_smd_id {
+	char name[20];
+};
+
+/**
  * struct qcom_smd_device - smd device struct
  * @dev:	the device struct
  * @channel:	handle to the smd channel for this device
@@ -21,6 +29,7 @@ struct qcom_smd_device {
 /**
  * struct qcom_smd_driver - smd driver struct
  * @driver:	underlying device driver
+ * @smd_match_table: static channel match table
  * @probe:	invoked when the smd channel is found
  * @remove:	invoked when the smd channel is closed
  * @callback:	invoked when an inbound message is received on the channel,
@@ -29,6 +38,8 @@ struct qcom_smd_device {
  */
 struct qcom_smd_driver {
 	struct device_driver driver;
+	const struct qcom_smd_id *smd_match_table;
+
 	int (*probe)(struct qcom_smd_device *dev);
 	void (*remove)(struct qcom_smd_device *dev);
 	int (*callback)(struct qcom_smd_device *, const void *, size_t);
diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h
index bc9630d3aced..785e196ee2ca 100644
--- a/include/linux/soc/qcom/smem.h
+++ b/include/linux/soc/qcom/smem.h
@@ -4,7 +4,7 @@
 #define QCOM_SMEM_HOST_ANY -1
 
 int qcom_smem_alloc(unsigned host, unsigned item, size_t size);
-int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size);
+void *qcom_smem_get(unsigned host, unsigned item, size_t *size);
 
 int qcom_smem_get_free_space(unsigned host);
 
diff --git a/include/linux/sunxi-rsb.h b/include/linux/sunxi-rsb.h
new file mode 100644
index 000000000000..7e75bb0346d0
--- /dev/null
+++ b/include/linux/sunxi-rsb.h
@@ -0,0 +1,105 @@
+/*
+ * Allwinner Reduced Serial Bus Driver
+ *
+ * Copyright (c) 2015 Chen-Yu Tsai
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _SUNXI_RSB_H
+#define _SUNXI_RSB_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct sunxi_rsb;
+
+/**
+ * struct sunxi_rsb_device - Basic representation of an RSB device
+ * @dev:	Driver model representation of the device.
+ * @ctrl:	RSB controller managing the bus hosting this device.
+ * @rtaddr:	This device's runtime address
+ * @hwaddr:	This device's hardware address
+ */
+struct sunxi_rsb_device {
+	struct device		dev;
+	struct sunxi_rsb	*rsb;
+	int			irq;
+	u8			rtaddr;
+	u16			hwaddr;
+};
+
+static inline struct sunxi_rsb_device *to_sunxi_rsb_device(struct device *d)
+{
+	return container_of(d, struct sunxi_rsb_device, dev);
+}
+
+static inline void *sunxi_rsb_device_get_drvdata(const struct sunxi_rsb_device *rdev)
+{
+	return dev_get_drvdata(&rdev->dev);
+}
+
+static inline void sunxi_rsb_device_set_drvdata(struct sunxi_rsb_device *rdev,
+						void *data)
+{
+	dev_set_drvdata(&rdev->dev, data);
+}
+
+/**
+ * struct sunxi_rsb_driver - RSB slave device driver
+ * @driver:	RSB device drivers should initialize name and owner field of
+ *		this structure.
+ * @probe:	binds this driver to a RSB device.
+ * @remove:	unbinds this driver from the RSB device.
+ */
+struct sunxi_rsb_driver {
+	struct device_driver driver;
+	int (*probe)(struct sunxi_rsb_device *rdev);
+	int (*remove)(struct sunxi_rsb_device *rdev);
+};
+
+static inline struct sunxi_rsb_driver *to_sunxi_rsb_driver(struct device_driver *d)
+{
+	return container_of(d, struct sunxi_rsb_driver, driver);
+}
+
+int sunxi_rsb_driver_register(struct sunxi_rsb_driver *rdrv);
+
+/**
+ * sunxi_rsb_driver_unregister() - unregister an RSB client driver
+ * @rdrv:	the driver to unregister
+ */
+static inline void sunxi_rsb_driver_unregister(struct sunxi_rsb_driver *rdrv)
+{
+	if (rdrv)
+		driver_unregister(&rdrv->driver);
+}
+
+#define module_sunxi_rsb_driver(__sunxi_rsb_driver) \
+	module_driver(__sunxi_rsb_driver, sunxi_rsb_driver_register, \
+			sunxi_rsb_driver_unregister)
+
+struct regmap *__devm_regmap_init_sunxi_rsb(struct sunxi_rsb_device *rdev,
+					    const struct regmap_config *config,
+					    struct lock_class_key *lock_key,
+					    const char *lock_name);
+
+/**
+ * devm_regmap_init_sunxi_rsb(): Initialise managed register map
+ *
+ * @rdev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sunxi_rsb(rdev, config)			\
+	__regmap_lockdep_wrapper(__devm_regmap_init_sunxi_rsb, #config,	\
+				 rdev, config)
+
+#endif /* _SUNXI_RSB_H */