Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux

Pull more clock framework updates from Mike Turquette:
 "This contains the second half the of the clk changes for 3.16.

  They are simply fixes and code refactoring for the OMAP clock drivers.
  The sunxi clock driver changes include splitting out the one
  mega-driver into several smaller pieces and adding support for the A31
  SoC clocks"

* tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
  clk: sunxi: document PRCM clock compatible strings
  clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
  clk: sun6i: Protect SDRAM gating bit
  clk: sun6i: Protect CPU clock
  clk: sunxi: Rework clock protection code
  clk: sunxi: Move the GMAC clock to a file of its own
  clk: sunxi: Move the 24M oscillator to a file of its own
  clk: sunxi: Remove calls to clk_put
  clk: sunxi: document new A31 USB clock compatible
  clk: sunxi: Implement A31 USB clock
  ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
  CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
  ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
  CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
  CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
  dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
  ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
  CLK: TI: gate: add composite interface clock to OMAP2 only build
  ARM: OMAP2: clock: add DT boot support for cpufreq_ck
  CLK: TI: OMAP2: add clock init support
  ...

1 files changed, 34 insertions, 1 deletions

diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 4a21a872dbbd..e8d8a35034a5 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -41,6 +41,8 @@
  * @idlest_reg: register containing the DPLL idle status bitfield
  * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
  * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg
+ * @dcc_rate: rate atleast which DCC @dcc_mask must be set
  * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
  * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
  * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
@@ -86,6 +88,8 @@ struct dpll_data {
 	u32			idlest_mask;
 	u32			dco_mask;
 	u32			sddiv_mask;
+	u32			dcc_mask;
+	unsigned long		dcc_rate;
 	u32			lpmode_mask;
 	u32			m4xen_mask;
 	u8			auto_recal_bit;
@@ -94,7 +98,26 @@ struct dpll_data {
 	u8			flags;
 };
 
-struct clk_hw_omap_ops;
+struct clk_hw_omap;
+
+/**
+ * struct clk_hw_omap_ops - OMAP clk ops
+ * @find_idlest: find idlest register information for a clock
+ * @find_companion: find companion clock register information for a clock,
+ *		    basically converts CM_ICLKEN* <-> CM_FCLKEN*
+ * @allow_idle: enables autoidle hardware functionality for a clock
+ * @deny_idle: prevent autoidle hardware functionality for a clock
+ */
+struct clk_hw_omap_ops {
+	void	(*find_idlest)(struct clk_hw_omap *oclk,
+			       void __iomem **idlest_reg,
+			       u8 *idlest_bit, u8 *idlest_val);
+	void	(*find_companion)(struct clk_hw_omap *oclk,
+				  void __iomem **other_reg,
+				  u8 *other_bit);
+	void	(*allow_idle)(struct clk_hw_omap *oclk);
+	void	(*deny_idle)(struct clk_hw_omap *oclk);
+};
 
 /**
  * struct clk_hw_omap - OMAP struct clk
@@ -259,6 +282,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void omap3_clk_lock_dpll5(void);
+unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate);
+int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
+			     unsigned long parent_rate);
+void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
+void omap2xxx_clkt_vps_init(void);
 
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -278,6 +307,8 @@ int omap5xxx_dt_clk_init(void);
 int dra7xx_dt_clk_init(void);
 int am33xx_dt_clk_init(void);
 int am43xx_dt_clk_init(void);
+int omap2420_dt_clk_init(void);
+int omap2430_dt_clk_init(void);
 
 #ifdef CONFIG_OF
 void of_ti_clk_allow_autoidle_all(void);
@@ -287,6 +318,8 @@ static inline void of_ti_clk_allow_autoidle_all(void) { }
 static inline void of_ti_clk_deny_autoidle_all(void) { }
 #endif
 
+extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 extern const struct clk_hw_omap_ops clkhwops_wait;