ide: DMA reporting and validity checking fixes (take 3)

* ide_xfer_verbose() fixups:
  - beautify returned mode names
  - fix PIO5 reporting
  - make it return 'const char *'

* Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode().

* Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid
  DMA info in identify block.

* Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update().

  As a result DMA won't be tuned or will be disabled after tuning if device
  reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the
  same checks while the IDE device is probed by ide-{cd,disk} device driver).

* Remove no longer needed ide_dma_verbose().

This patch should fix the following problem with out-of-sync IDE messages
reported by Nick Warne:

       hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd:
       skipping word 93 validity check
        , UDMA(66)

and later debugged by Mark Lord to be caused by:

        ide_dma_verbose()
                printk( ... "2048kB Cache");
        eighty_ninty_three()
                printk(KERN_DEBUG "%s: skipping word 93 validity check\n");
        ide_dma_verbose()
                printk(", UDMA(66)"

Please note that as a result ide-{cd,disk} device drivers won't report the
DMA speed used but this is intended since now DMA mode being used is always
reported by IDE core code.

v2:
* fixes suggested by Randy:
  - use KERN_CONT for printk()-s in ide-{cd,disk}.c
  - don't remove argument name from ide_xfer_verbose() declaration

v3:
* Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug()
  (spotted by Sergei).

* "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei).

* Fix ide_find_dma_mode() to report the correct mode ('mode' after being
  limited by 'req_mode').

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Nick Warne <nick@ukfsn.org>
Cc: Mark Lord <lkml@rtr.ca>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 3 insertions, 3 deletions

diff --git a/include/linux/ide.h b/include/linux/ide.h
index dc75ccbcf991..9a6a41e7079f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1255,6 +1255,7 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int __ide_dma_bad_drive(ide_drive_t *);
+int ide_id_dma_bug(ide_drive_t *);
 
 u8 ide_find_dma_mode(ide_drive_t *, u8);
 
@@ -1264,7 +1265,6 @@ static inline u8 ide_max_dma_mode(ide_drive_t *drive)
 }
 
 void ide_dma_off(ide_drive_t *);
-void ide_dma_verbose(ide_drive_t *);
 int ide_set_dma(ide_drive_t *);
 ide_startstop_t ide_dma_intr(ide_drive_t *);
 
@@ -1287,6 +1287,7 @@ extern void ide_dma_timeout(ide_drive_t *);
 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
 
 #else
+static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off(ide_drive_t *drive) { ; }
@@ -1333,8 +1334,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
 	hwif->hwif_data = data;
 }
 
-/* ide-lib.c */
-extern char *ide_xfer_verbose(u8 xfer_rate);
+const char *ide_xfer_verbose(u8 mode);
 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);