Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

5 files changed, 285 insertions, 27 deletions

diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 40edf6a8533e..a469999a106d 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -437,6 +437,9 @@ extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
 		struct usb_host_interface *new_alt);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
+struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
+		struct device *sysdev, struct device *dev, const char *bus_name,
+		struct usb_hcd *primary_hcd);
 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
 		struct device *dev, const char *bus_name);
 extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
@@ -453,7 +456,7 @@ extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
 struct platform_device;
 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 struct pci_dev;
 struct pci_device_id;
 extern int usb_hcd_pci_probe(struct pci_dev *dev,
@@ -466,7 +469,7 @@ extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
 #ifdef CONFIG_PM
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_USB_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
 void usb_init_pool_max(void);
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index 5ff9032ee1b4..4031f47629ec 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -18,6 +18,7 @@ int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
 struct device_node *usb_of_get_child_node(struct device_node *parent,
 			int portnum);
+struct device *usb_of_get_companion_dev(struct device *dev);
 #else
 static inline enum usb_dr_mode
 of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
@@ -38,6 +39,10 @@ static inline struct device_node *usb_of_get_child_node
 {
 	return NULL;
 }
+static inline struct device *usb_of_get_companion_dev(struct device *dev)
+{
+	return NULL;
+}
 #endif
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT)
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
index 7a0350535cb1..a0a8f878503c 100644
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -21,21 +21,6 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 
-#undef VERBOSE
-
-#ifdef VERBOSE
-#define VDBG(fmt, args...) pr_debug("[%s]  " fmt , \
-				 __func__, ## args)
-#else
-#define VDBG(stuff...)	do {} while (0)
-#endif
-
-#ifdef VERBOSE
-#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
-#else
-#define MPC_LOC do {} while (0)
-#endif
-
 #define PROTO_UNDEF	(0)
 #define PROTO_HOST	(1)
 #define PROTO_GADGET	(2)
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 704a1ab8240c..e2f0ab07eea5 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -20,7 +20,7 @@
 #include <linux/kfifo.h>
 
 /* The maximum number of ports one device can grab at once */
-#define MAX_NUM_PORTS		8
+#define MAX_NUM_PORTS		16
 
 /* parity check flag */
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
@@ -159,10 +159,10 @@ struct usb_serial {
 	unsigned char			minors_reserved:1;
 	unsigned char			num_ports;
 	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
+	unsigned char			num_interrupt_in;
+	unsigned char			num_interrupt_out;
+	unsigned char			num_bulk_in;
+	unsigned char			num_bulk_out;
 	struct usb_serial_port		*port[MAX_NUM_PORTS];
 	struct kref			kref;
 	struct mutex			disc_mutex;
@@ -181,6 +181,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 	serial->private = data;
 }
 
+struct usb_serial_endpoints {
+	unsigned char num_bulk_in;
+	unsigned char num_bulk_out;
+	unsigned char num_interrupt_in;
+	unsigned char num_interrupt_out;
+	struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS];
+};
+
 /**
  * usb_serial_driver - describes a usb serial driver
  * @description: pointer to a string that describes this driver.  This string
@@ -188,12 +199,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_ports: the number of different ports this device will have.
+ * @num_bulk_in: minimum number of bulk-in endpoints
+ * @num_bulk_out: minimum number of bulk-out endpoints
+ * @num_interrupt_in: minimum number of interrupt-in endpoints
+ * @num_interrupt_out: minimum number of interrupt-out endpoints
  * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
  *	(0 = end-point size)
  * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
  * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
+ *	device has dynamically. It can also be used to verify the number of
+ *	endpoints or to modify the port-endpoint mapping. It will be called
+ *	after the probe() callback is called, but before attach().
  * @probe: pointer to the driver's probe function.
  *	This will be called when the device is inserted into the system,
  *	but before the device has been fully initialized by the usb_serial
@@ -227,19 +243,26 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 struct usb_serial_driver {
 	const char *description;
 	const struct usb_device_id *id_table;
-	char	num_ports;
 
 	struct list_head	driver_list;
 	struct device_driver	driver;
 	struct usb_driver	*usb_driver;
 	struct usb_dynids	dynids;
 
+	unsigned char		num_ports;
+
+	unsigned char		num_bulk_in;
+	unsigned char		num_bulk_out;
+	unsigned char		num_interrupt_in;
+	unsigned char		num_interrupt_out;
+
 	size_t			bulk_in_size;
 	size_t			bulk_out_size;
 
 	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
 	int (*attach)(struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
+	int (*calc_num_ports)(struct usb_serial *serial,
+			struct usb_serial_endpoints *epds);
 
 	void (*disconnect)(struct usb_serial *serial);
 	void (*release)(struct usb_serial *serial);
@@ -356,7 +379,6 @@ extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 extern int usb_serial_bus_register(struct usb_serial_driver *device);
 extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
 
-extern struct usb_serial_driver usb_serial_generic_device;
 extern struct bus_type usb_serial_bus_type;
 extern struct tty_driver *usb_serial_tty_driver;
 
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
new file mode 100644
index 000000000000..ec78204964ab
--- /dev/null
+++ b/include/linux/usb/typec.h
@@ -0,0 +1,243 @@
+
+#ifndef __LINUX_USB_TYPEC_H
+#define __LINUX_USB_TYPEC_H
+
+#include <linux/types.h>
+
+/* XXX: Once we have a header for USB Power Delivery, this belongs there */
+#define ALTMODE_MAX_MODES	6
+
+/* USB Type-C Specification releases */
+#define USB_TYPEC_REV_1_0	0x100 /* 1.0 */
+#define USB_TYPEC_REV_1_1	0x110 /* 1.1 */
+#define USB_TYPEC_REV_1_2	0x120 /* 1.2 */
+
+struct typec_altmode;
+struct typec_partner;
+struct typec_cable;
+struct typec_plug;
+struct typec_port;
+
+struct fwnode_handle;
+
+enum typec_port_type {
+	TYPEC_PORT_DFP,
+	TYPEC_PORT_UFP,
+	TYPEC_PORT_DRP,
+};
+
+enum typec_plug_type {
+	USB_PLUG_NONE,
+	USB_PLUG_TYPE_A,
+	USB_PLUG_TYPE_B,
+	USB_PLUG_TYPE_C,
+	USB_PLUG_CAPTIVE,
+};
+
+enum typec_data_role {
+	TYPEC_DEVICE,
+	TYPEC_HOST,
+};
+
+enum typec_role {
+	TYPEC_SINK,
+	TYPEC_SOURCE,
+};
+
+enum typec_pwr_opmode {
+	TYPEC_PWR_MODE_USB,
+	TYPEC_PWR_MODE_1_5A,
+	TYPEC_PWR_MODE_3_0A,
+	TYPEC_PWR_MODE_PD,
+};
+
+enum typec_accessory {
+	TYPEC_ACCESSORY_NONE,
+	TYPEC_ACCESSORY_AUDIO,
+	TYPEC_ACCESSORY_DEBUG,
+};
+
+#define TYPEC_MAX_ACCESSORY	3
+
+/*
+ * struct usb_pd_identity - USB Power Delivery identity data
+ * @id_header: ID Header VDO
+ * @cert_stat: Cert Stat VDO
+ * @product: Product VDO
+ *
+ * USB power delivery Discover Identity command response data.
+ *
+ * REVISIT: This is USB Power Delivery specific information, so this structure
+ * probable belongs to USB Power Delivery header file once we have them.
+ */
+struct usb_pd_identity {
+	u32			id_header;
+	u32			cert_stat;
+	u32			product;
+};
+
+int typec_partner_set_identity(struct typec_partner *partner);
+int typec_cable_set_identity(struct typec_cable *cable);
+
+/*
+ * struct typec_mode_desc - Individual Mode of an Alternate Mode
+ * @index: Index of the Mode within the SVID
+ * @vdo: VDO returned by Discover Modes USB PD command
+ * @desc: Optional human readable description of the mode
+ * @roles: Only for ports. DRP if the mode is available in both roles
+ *
+ * Description of a mode of an Alternate Mode which a connector, cable plug or
+ * partner supports. Every mode will have it's own sysfs group. The details are
+ * the VDO returned by discover modes command, description for the mode and
+ * active flag telling has the mode being entered or not.
+ */
+struct typec_mode_desc {
+	int			index;
+	u32			vdo;
+	char			*desc;
+	/* Only used with ports */
+	enum typec_port_type	roles;
+};
+
+/*
+ * struct typec_altmode_desc - USB Type-C Alternate Mode Descriptor
+ * @svid: Standard or Vendor ID
+ * @n_modes: Number of modes
+ * @modes: Array of modes supported by the Alternate Mode
+ *
+ * Representation of an Alternate Mode that has SVID assigned by USB-IF. The
+ * array of modes will list the modes of a particular SVID that are supported by
+ * a connector, partner of a cable plug.
+ */
+struct typec_altmode_desc {
+	u16			svid;
+	int			n_modes;
+	struct typec_mode_desc	modes[ALTMODE_MAX_MODES];
+};
+
+struct typec_altmode
+*typec_partner_register_altmode(struct typec_partner *partner,
+				struct typec_altmode_desc *desc);
+struct typec_altmode
+*typec_plug_register_altmode(struct typec_plug *plug,
+			     struct typec_altmode_desc *desc);
+struct typec_altmode
+*typec_port_register_altmode(struct typec_port *port,
+			     struct typec_altmode_desc *desc);
+void typec_unregister_altmode(struct typec_altmode *altmode);
+
+struct typec_port *typec_altmode2port(struct typec_altmode *alt);
+
+void typec_altmode_update_active(struct typec_altmode *alt, int mode,
+				 bool active);
+
+enum typec_plug_index {
+	TYPEC_PLUG_SOP_P,
+	TYPEC_PLUG_SOP_PP,
+};
+
+/*
+ * struct typec_plug_desc - USB Type-C Cable Plug Descriptor
+ * @index: SOP Prime for the plug connected to DFP and SOP Double Prime for the
+ *         plug connected to UFP
+ *
+ * Represents USB Type-C Cable Plug.
+ */
+struct typec_plug_desc {
+	enum typec_plug_index	index;
+};
+
+/*
+ * struct typec_cable_desc - USB Type-C Cable Descriptor
+ * @type: The plug type from USB PD Cable VDO
+ * @active: Is the cable active or passive
+ * @identity: Result of Discover Identity command
+ *
+ * Represents USB Type-C Cable attached to USB Type-C port.
+ */
+struct typec_cable_desc {
+	enum typec_plug_type	type;
+	unsigned int		active:1;
+	struct usb_pd_identity	*identity;
+};
+
+/*
+ * struct typec_partner_desc - USB Type-C Partner Descriptor
+ * @usb_pd: USB Power Delivery support
+ * @accessory: Audio, Debug or none.
+ * @identity: Discover Identity command data
+ *
+ * Details about a partner that is attached to USB Type-C port. If @identity
+ * member exists when partner is registered, a directory named "identity" is
+ * created to sysfs for the partner device.
+ */
+struct typec_partner_desc {
+	unsigned int		usb_pd:1;
+	enum typec_accessory	accessory;
+	struct usb_pd_identity	*identity;
+};
+
+/*
+ * struct typec_capability - USB Type-C Port Capabilities
+ * @role: DFP (Host-only), UFP (Device-only) or DRP (Dual Role)
+ * @revision: USB Type-C Specification release. Binary coded decimal
+ * @pd_revision: USB Power Delivery Specification revision if supported
+ * @prefer_role: Initial role preference
+ * @accessory: Supported Accessory Modes
+ * @fwnode: Optional fwnode of the port
+ * @try_role: Set data role preference for DRP port
+ * @dr_set: Set Data Role
+ * @pr_set: Set Power Role
+ * @vconn_set: Set VCONN Role
+ * @activate_mode: Enter/exit given Alternate Mode
+ *
+ * Static capabilities of a single USB Type-C port.
+ */
+struct typec_capability {
+	enum typec_port_type	type;
+	u16			revision; /* 0120H = "1.2" */
+	u16			pd_revision; /* 0300H = "3.0" */
+	int			prefer_role;
+	enum typec_accessory	accessory[TYPEC_MAX_ACCESSORY];
+
+	struct fwnode_handle	*fwnode;
+
+	int		(*try_role)(const struct typec_capability *,
+				    int role);
+
+	int		(*dr_set)(const struct typec_capability *,
+				  enum typec_data_role);
+	int		(*pr_set)(const struct typec_capability *,
+				  enum typec_role);
+	int		(*vconn_set)(const struct typec_capability *,
+				     enum typec_role);
+
+	int		(*activate_mode)(const struct typec_capability *,
+					 int mode, int activate);
+};
+
+/* Specific to try_role(). Indicates the user want's to clear the preference. */
+#define TYPEC_NO_PREFERRED_ROLE	(-1)
+
+struct typec_port *typec_register_port(struct device *parent,
+				       const struct typec_capability *cap);
+void typec_unregister_port(struct typec_port *port);
+
+struct typec_partner *typec_register_partner(struct typec_port *port,
+					     struct typec_partner_desc *desc);
+void typec_unregister_partner(struct typec_partner *partner);
+
+struct typec_cable *typec_register_cable(struct typec_port *port,
+					 struct typec_cable_desc *desc);
+void typec_unregister_cable(struct typec_cable *cable);
+
+struct typec_plug *typec_register_plug(struct typec_cable *cable,
+				       struct typec_plug_desc *desc);
+void typec_unregister_plug(struct typec_plug *plug);
+
+void typec_set_data_role(struct typec_port *port, enum typec_data_role role);
+void typec_set_pwr_role(struct typec_port *port, enum typec_role role);
+void typec_set_vconn_role(struct typec_port *port, enum typec_role role);
+void typec_set_pwr_opmode(struct typec_port *port, enum typec_pwr_opmode mode);
+
+#endif /* __LINUX_USB_TYPEC_H */