Merge branch 'next' into for-linus

6 files changed, 45 insertions, 19 deletions

diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
index 6334cee1a3be..58368be0b4c0 100644
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@@ -12,6 +12,8 @@ struct ad7879_platform_data {
 	u16	y_min, y_max;
 	u16	pressure_min, pressure_max;
 
+	bool	swap_xy;		/* swap x and y axes */
+
 	/* [0..255] 0=OFF Starts at 1=550us and goes
 	 * all the way to 9.440ms in steps of 35us.
 	 */
diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
index 306e7b1c69ed..403e007aef68 100644
--- a/include/linux/spi/eeprom.h
+++ b/include/linux/spi/eeprom.h
@@ -20,6 +20,16 @@ struct spi_eeprom {
 #define	EE_ADDR3	0x0004			/* 24 bit addrs */
 #define	EE_READONLY	0x0008			/* disallow writes */
 
+	/*
+	 * Certain EEPROMS have a size that is larger than the number of address
+	 * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
+	 * but uses only one address byte (A0 to A7) for addressing.) For
+	 * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
+	 * is used. This instruction bit is normally defined as don't care for
+	 * other AT25 like chips.
+	 */
+#define EE_INSTR_BIT3_IS_ADDR	0x0010
+
 	/* for exporting this chip's data to other kernel code */
 	void (*setup)(struct memory_accessor *mem, void *context);
 	void *context;
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
deleted file mode 100644
index b4d9fa6f797c..000000000000
--- a/include/linux/spi/orion_spi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * orion_spi.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_SPI_ORION_SPI_H
-#define __LINUX_SPI_ORION_SPI_H
-
-struct orion_spi_info {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index d3e1075f7b60..c73d1445c77e 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -43,7 +43,7 @@ struct pxa2xx_spi_chip {
 	void (*cs_control)(u32 command);
 };
 
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
 
 #include <linux/clk.h>
 #include <mach/dma.h>
diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h
new file mode 100644
index 000000000000..900f0e328235
--- /dev/null
+++ b/include/linux/spi/rspi.h
@@ -0,0 +1,31 @@
+/*
+ * Renesas SPI driver
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_SPI_RENESAS_SPI_H__
+#define __LINUX_SPI_RENESAS_SPI_H__
+
+struct rspi_plat_data {
+	unsigned int dma_tx_id;
+	unsigned int dma_rx_id;
+
+	unsigned dma_width_16bit:1;	/* DMAC read/write width = 16-bit */
+};
+
+#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 98679b061b63..fa702aeb5038 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -254,7 +254,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	driver is finished with this message, it must call
  *	spi_finalize_current_message() so the subsystem can issue the next
  *	transfer
- * @prepare_transfer_hardware: there are currently no more messages on the
+ * @unprepare_transfer_hardware: there are currently no more messages on the
  *	queue so the subsystem notifies the driver that it may relax the
  *	hardware by issuing this call
  *