Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 184 insertions, 0 deletions

diff --git a/include/linux/serialP.h b/include/linux/serialP.h
new file mode 100644
index 000000000000..2307f11d8a6b
--- /dev/null
+++ b/include/linux/serialP.h
@@ -0,0 +1,184 @@
+/*
+ * Private header file for the (dumb) serial driver
+ *
+ * Copyright (C) 1997 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIALP_H
+#define _LINUX_SERIALP_H
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/wait.h>
+
+struct serial_state {
+	int	magic;
+	int	baud_base;
+	unsigned long	port;
+	int	irq;
+	int	flags;
+	int	hub6;
+	int	type;
+	int	line;
+	int	revision;	/* Chip revision (950) */
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	count;
+	u8	*iomem_base;
+	u16	iomem_reg_shift;
+	unsigned short	close_delay;
+	unsigned short	closing_wait; /* time to wait before closing */
+	struct async_icount	icount;	
+	int	io_type;
+	struct async_struct *info;
+	struct pci_dev	*dev;
+};
+
+struct async_struct {
+	int			magic;
+	unsigned long		port;
+	int			hub6;
+	int			flags;
+	int			xmit_fifo_size;
+	struct serial_state	*state;
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			quot;
+	int			x_char;	/* xon/xoff character */
+	int			close_delay;
+	unsigned short		closing_wait;
+	unsigned short		closing_wait2; /* obsolete */
+	int			IER; 	/* Interrupt Enable Register */
+	int			MCR; 	/* Modem control register */
+	int			LCR; 	/* Line control register */
+	int			ACR;	 /* 16950 Additional Control Reg. */
+	unsigned long		event;
+	unsigned long		last_active;
+	int			line;
+	int			blocked_open; /* # of blocked opens */
+ 	struct circ_buf		xmit;
+ 	spinlock_t		xmit_lock;
+	u8			*iomem_base;
+	u16			iomem_reg_shift;
+	int			io_type;
+	struct work_struct			work;
+	struct tasklet_struct	tlet;
+#ifdef DECLARE_WAITQUEUE
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+	wait_queue_head_t	delta_msr_wait;
+#else	
+	struct wait_queue	*open_wait;
+	struct wait_queue	*close_wait;
+	struct wait_queue	*delta_msr_wait;
+#endif	
+	struct async_struct	*next_port; /* For the linked list */
+	struct async_struct	*prev_port;
+};
+
+#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))
+
+#define SERIAL_MAGIC 0x5301
+#define SSTATE_MAGIC 0x5302
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP	0
+
+/*
+ * Multiport serial configuration structure --- internal structure
+ */
+struct rs_multiport_struct {
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+};
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's.  The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ *
+ * This is still used by arch/mips/au1000/common/serial.c for some weird
+ * reason (mips != alpha!)
+ */
+#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif
+
+/*
+ * Definitions for PCI support.
+ */
+#define SPCI_FL_BASE_MASK	0x0007
+#define SPCI_FL_BASE0	0x0000
+#define SPCI_FL_BASE1	0x0001
+#define SPCI_FL_BASE2	0x0002
+#define SPCI_FL_BASE3	0x0003
+#define SPCI_FL_BASE4	0x0004
+#define SPCI_FL_GET_BASE(x)	(x & SPCI_FL_BASE_MASK)
+
+#define SPCI_FL_IRQ_MASK       (0x0007 << 4)
+#define SPCI_FL_IRQBASE0       (0x0000 << 4)
+#define SPCI_FL_IRQBASE1       (0x0001 << 4)
+#define SPCI_FL_IRQBASE2       (0x0002 << 4)
+#define SPCI_FL_IRQBASE3       (0x0003 << 4)
+#define SPCI_FL_IRQBASE4       (0x0004 << 4)
+#define SPCI_FL_GET_IRQBASE(x)        ((x & SPCI_FL_IRQ_MASK) >> 4)
+
+/* Use successive BARs (PCI base address registers), 
+   else use offset into some specified BAR */
+#define SPCI_FL_BASE_TABLE	0x0100
+
+/* Use successive entries in the irq resource table */
+#define SPCI_FL_IRQ_TABLE	0x0200
+
+/* Use the irq resource table instead of dev->irq */
+#define SPCI_FL_IRQRESOURCE	0x0400
+
+/* Use the Base address register size to cap number of ports */
+#define SPCI_FL_REGION_SZ_CAP	0x0800
+
+/* Do not use irq sharing for this device */
+#define SPCI_FL_NO_SHIRQ	0x1000
+
+/* This is a PNP device */
+#define SPCI_FL_ISPNP		0x2000
+
+#define SPCI_FL_PNPDEFAULT	(SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
+
+#endif /* _LINUX_SERIAL_H */