Merge tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for RAVE Supervisory Processor

  Moved drivers:
   - Move Realtek Card Reader Driver to Misc

  New Device Support:
   - Add support for Pinctrl to axp20x

  New Functionality:
   - Add resume support to atmel-flexcom

  Fix-ups:
   - Split MFD (mfd) and userspace handlers (platform) in cros_ec
   - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
   - Clean-up error handling in ab8500-debugfs
   - General tidying up in tmio_core
   - Kconfig fix-ups for qcom-pm8xxx
   - Licensing changes (SPDX) to stm32-lptimer, stm32-timers
   - Device Tree fixups in mc13xxx
   - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
     kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"

* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
  mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
  mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
  atmel_flexcom: Support resuming after a chip reset
  mfd: Remove duplicate includes
  dt-bindings: mfd: mc13xxx: Add the unit address to sysled
  mfd: stm32: Adopt SPDX identifier
  mfd: axp20x: Add pinctrl cell for AXP813
  mfd: pm8xxx: Make elegible for COMPILE_TEST
  mfd: kempld-core: Use resource_size function on resource object
  mfd: tmio: Move register macros to tmio_core.c
  mfd: cros ec: spi: Simplify delay handling between SPI messages
  mfd: palmas: Assign the right powerhold mask for tps65917
  mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
  mfd: ti_am335x_tscadc: Remove redundant assignment to node
  mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
  dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
  watchdog: Add RAVE SP watchdog driver
  mfd: Add driver for RAVE Supervisory Processor
  serdev: Introduce devm_serdev_device_open()
  ...

1 files changed, 1367 insertions, 0 deletions

diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
new file mode 100644
index 000000000000..478acf6efac6
--- /dev/null
+++ b/include/linux/rtsx_pci.h
@@ -0,0 +1,1367 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Wei WANG <wei_wang@realsil.com.cn>
+ */
+
+#ifndef __RTSX_PCI_H
+#define __RTSX_PCI_H
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/rtsx_common.h>
+
+#define MAX_RW_REG_CNT			1024
+
+#define RTSX_HCBAR			0x00
+#define RTSX_HCBCTLR			0x04
+#define   STOP_CMD			(0x01 << 28)
+#define   READ_REG_CMD			0
+#define   WRITE_REG_CMD			1
+#define   CHECK_REG_CMD			2
+
+#define RTSX_HDBAR			0x08
+#define   SG_INT			0x04
+#define   SG_END			0x02
+#define   SG_VALID			0x01
+#define   SG_NO_OP			0x00
+#define   SG_TRANS_DATA			(0x02 << 4)
+#define   SG_LINK_DESC			(0x03 << 4)
+#define RTSX_HDBCTLR			0x0C
+#define   SDMA_MODE			0x00
+#define   ADMA_MODE			(0x02 << 26)
+#define   STOP_DMA			(0x01 << 28)
+#define   TRIG_DMA			(0x01 << 31)
+
+#define RTSX_HAIMR			0x10
+#define   HAIMR_TRANS_START		(0x01 << 31)
+#define   HAIMR_READ			0x00
+#define   HAIMR_WRITE			(0x01 << 30)
+#define   HAIMR_READ_START		(HAIMR_TRANS_START | HAIMR_READ)
+#define   HAIMR_WRITE_START		(HAIMR_TRANS_START | HAIMR_WRITE)
+#define   HAIMR_TRANS_END			(HAIMR_TRANS_START)
+
+#define RTSX_BIPR			0x14
+#define   CMD_DONE_INT			(1 << 31)
+#define   DATA_DONE_INT			(1 << 30)
+#define   TRANS_OK_INT			(1 << 29)
+#define   TRANS_FAIL_INT		(1 << 28)
+#define   XD_INT			(1 << 27)
+#define   MS_INT			(1 << 26)
+#define   SD_INT			(1 << 25)
+#define   GPIO0_INT			(1 << 24)
+#define   OC_INT			(1 << 23)
+#define   SD_WRITE_PROTECT		(1 << 19)
+#define   XD_EXIST			(1 << 18)
+#define   MS_EXIST			(1 << 17)
+#define   SD_EXIST			(1 << 16)
+#define   DELINK_INT			GPIO0_INT
+#define   MS_OC_INT			(1 << 23)
+#define   SD_OC_INT			(1 << 22)
+
+#define CARD_INT		(XD_INT | MS_INT | SD_INT)
+#define NEED_COMPLETE_INT	(DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
+#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | \
+					CARD_INT | GPIO0_INT | OC_INT)
+#define CARD_EXIST		(XD_EXIST | MS_EXIST | SD_EXIST)
+
+#define RTSX_BIER			0x18
+#define   CMD_DONE_INT_EN		(1 << 31)
+#define   DATA_DONE_INT_EN		(1 << 30)
+#define   TRANS_OK_INT_EN		(1 << 29)
+#define   TRANS_FAIL_INT_EN		(1 << 28)
+#define   XD_INT_EN			(1 << 27)
+#define   MS_INT_EN			(1 << 26)
+#define   SD_INT_EN			(1 << 25)
+#define   GPIO0_INT_EN			(1 << 24)
+#define   OC_INT_EN			(1 << 23)
+#define   DELINK_INT_EN			GPIO0_INT_EN
+#define   MS_OC_INT_EN			(1 << 23)
+#define   SD_OC_INT_EN			(1 << 22)
+
+
+/*
+ * macros for easy use
+ */
+#define rtsx_pci_writel(pcr, reg, value) \
+	iowrite32(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readl(pcr, reg) \
+	ioread32((pcr)->remap_addr + reg)
+#define rtsx_pci_writew(pcr, reg, value) \
+	iowrite16(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readw(pcr, reg) \
+	ioread16((pcr)->remap_addr + reg)
+#define rtsx_pci_writeb(pcr, reg, value) \
+	iowrite8(value, (pcr)->remap_addr + reg)
+#define rtsx_pci_readb(pcr, reg) \
+	ioread8((pcr)->remap_addr + reg)
+
+#define rtsx_pci_read_config_byte(pcr, where, val) \
+	pci_read_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_byte(pcr, where, val) \
+	pci_write_config_byte((pcr)->pci, where, val)
+
+#define rtsx_pci_read_config_dword(pcr, where, val) \
+	pci_read_config_dword((pcr)->pci, where, val)
+
+#define rtsx_pci_write_config_dword(pcr, where, val) \
+	pci_write_config_dword((pcr)->pci, where, val)
+
+#define STATE_TRANS_NONE		0
+#define STATE_TRANS_CMD			1
+#define STATE_TRANS_BUF			2
+#define STATE_TRANS_SG			3
+
+#define TRANS_NOT_READY			0
+#define TRANS_RESULT_OK			1
+#define TRANS_RESULT_FAIL		2
+#define TRANS_NO_DEVICE			3
+
+#define RTSX_RESV_BUF_LEN		4096
+#define HOST_CMDS_BUF_LEN		1024
+#define HOST_SG_TBL_BUF_LEN		(RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+#define HOST_SG_TBL_ITEMS		(HOST_SG_TBL_BUF_LEN / 8)
+#define MAX_SG_ITEM_LEN			0x80000
+#define HOST_TO_DEVICE			0
+#define DEVICE_TO_HOST			1
+
+#define OUTPUT_3V3			0
+#define OUTPUT_1V8			1
+
+#define RTSX_PHASE_MAX			32
+#define RX_TUNING_CNT			3
+
+#define MS_CFG				0xFD40
+#define   SAMPLE_TIME_RISING		0x00
+#define   SAMPLE_TIME_FALLING		0x80
+#define   PUSH_TIME_DEFAULT		0x00
+#define   PUSH_TIME_ODD			0x40
+#define   NO_EXTEND_TOGGLE		0x00
+#define   EXTEND_TOGGLE_CHK		0x20
+#define   MS_BUS_WIDTH_1		0x00
+#define   MS_BUS_WIDTH_4		0x10
+#define   MS_BUS_WIDTH_8		0x18
+#define   MS_2K_SECTOR_MODE		0x04
+#define   MS_512_SECTOR_MODE		0x00
+#define   MS_TOGGLE_TIMEOUT_EN		0x00
+#define   MS_TOGGLE_TIMEOUT_DISEN	0x01
+#define MS_NO_CHECK_INT			0x02
+#define MS_TPC				0xFD41
+#define MS_TRANS_CFG			0xFD42
+#define   WAIT_INT			0x80
+#define   NO_WAIT_INT			0x00
+#define   NO_AUTO_READ_INT_REG		0x00
+#define   AUTO_READ_INT_REG		0x40
+#define   MS_CRC16_ERR			0x20
+#define   MS_RDY_TIMEOUT		0x10
+#define   MS_INT_CMDNK			0x08
+#define   MS_INT_BREQ			0x04
+#define   MS_INT_ERR			0x02
+#define   MS_INT_CED			0x01
+#define MS_TRANSFER			0xFD43
+#define   MS_TRANSFER_START		0x80
+#define   MS_TRANSFER_END		0x40
+#define   MS_TRANSFER_ERR		0x20
+#define   MS_BS_STATE			0x10
+#define   MS_TM_READ_BYTES		0x00
+#define   MS_TM_NORMAL_READ		0x01
+#define   MS_TM_WRITE_BYTES		0x04
+#define   MS_TM_NORMAL_WRITE		0x05
+#define   MS_TM_AUTO_READ		0x08
+#define   MS_TM_AUTO_WRITE		0x0C
+#define MS_INT_REG			0xFD44
+#define MS_BYTE_CNT			0xFD45
+#define MS_SECTOR_CNT_L			0xFD46
+#define MS_SECTOR_CNT_H			0xFD47
+#define MS_DBUS_H			0xFD48
+
+#define SD_CFG1				0xFDA0
+#define   SD_CLK_DIVIDE_0		0x00
+#define   SD_CLK_DIVIDE_256		0xC0
+#define   SD_CLK_DIVIDE_128		0x80
+#define   SD_BUS_WIDTH_1BIT		0x00
+#define   SD_BUS_WIDTH_4BIT		0x01
+#define   SD_BUS_WIDTH_8BIT		0x02
+#define   SD_ASYNC_FIFO_NOT_RST		0x10
+#define   SD_20_MODE			0x00
+#define   SD_DDR_MODE			0x04
+#define   SD_30_MODE			0x08
+#define   SD_CLK_DIVIDE_MASK		0xC0
+#define   SD_MODE_SELECT_MASK		0x0C
+#define SD_CFG2				0xFDA1
+#define   SD_CALCULATE_CRC7		0x00
+#define   SD_NO_CALCULATE_CRC7		0x80
+#define   SD_CHECK_CRC16		0x00
+#define   SD_NO_CHECK_CRC16		0x40
+#define   SD_NO_CHECK_WAIT_CRC_TO	0x20
+#define   SD_WAIT_BUSY_END		0x08
+#define   SD_NO_WAIT_BUSY_END		0x00
+#define   SD_CHECK_CRC7			0x00
+#define   SD_NO_CHECK_CRC7		0x04
+#define   SD_RSP_LEN_0			0x00
+#define   SD_RSP_LEN_6			0x01
+#define   SD_RSP_LEN_17			0x02
+#define   SD_RSP_TYPE_R0		0x04
+#define   SD_RSP_TYPE_R1		0x01
+#define   SD_RSP_TYPE_R1b		0x09
+#define   SD_RSP_TYPE_R2		0x02
+#define   SD_RSP_TYPE_R3		0x05
+#define   SD_RSP_TYPE_R4		0x05
+#define   SD_RSP_TYPE_R5		0x01
+#define   SD_RSP_TYPE_R6		0x01
+#define   SD_RSP_TYPE_R7		0x01
+#define SD_CFG3				0xFDA2
+#define   SD30_CLK_END_EN		0x10
+#define   SD_RSP_80CLK_TIMEOUT_EN	0x01
+
+#define SD_STAT1			0xFDA3
+#define   SD_CRC7_ERR			0x80
+#define   SD_CRC16_ERR			0x40
+#define   SD_CRC_WRITE_ERR		0x20
+#define   SD_CRC_WRITE_ERR_MASK		0x1C
+#define   GET_CRC_TIME_OUT		0x02
+#define   SD_TUNING_COMPARE_ERR		0x01
+#define SD_STAT2			0xFDA4
+#define   SD_RSP_80CLK_TIMEOUT		0x01
+
+#define SD_BUS_STAT			0xFDA5
+#define   SD_CLK_TOGGLE_EN		0x80
+#define   SD_CLK_FORCE_STOP		0x40
+#define   SD_DAT3_STATUS		0x10
+#define   SD_DAT2_STATUS		0x08
+#define   SD_DAT1_STATUS		0x04
+#define   SD_DAT0_STATUS		0x02
+#define   SD_CMD_STATUS			0x01
+#define SD_PAD_CTL			0xFDA6
+#define   SD_IO_USING_1V8		0x80
+#define   SD_IO_USING_3V3		0x7F
+#define   TYPE_A_DRIVING		0x00
+#define   TYPE_B_DRIVING		0x01
+#define   TYPE_C_DRIVING		0x02
+#define   TYPE_D_DRIVING		0x03
+#define SD_SAMPLE_POINT_CTL		0xFDA7
+#define   DDR_FIX_RX_DAT		0x00
+#define   DDR_VAR_RX_DAT		0x80
+#define   DDR_FIX_RX_DAT_EDGE		0x00
+#define   DDR_FIX_RX_DAT_14_DELAY	0x40
+#define   DDR_FIX_RX_CMD		0x00
+#define   DDR_VAR_RX_CMD		0x20
+#define   DDR_FIX_RX_CMD_POS_EDGE	0x00
+#define   DDR_FIX_RX_CMD_14_DELAY	0x10
+#define   SD20_RX_POS_EDGE		0x00
+#define   SD20_RX_14_DELAY		0x08
+#define SD20_RX_SEL_MASK		0x08
+#define SD_PUSH_POINT_CTL		0xFDA8
+#define   DDR_FIX_TX_CMD_DAT		0x00
+#define   DDR_VAR_TX_CMD_DAT		0x80
+#define   DDR_FIX_TX_DAT_14_TSU		0x00
+#define   DDR_FIX_TX_DAT_12_TSU		0x40
+#define   DDR_FIX_TX_CMD_NEG_EDGE	0x00
+#define   DDR_FIX_TX_CMD_14_AHEAD	0x20
+#define   SD20_TX_NEG_EDGE		0x00
+#define   SD20_TX_14_AHEAD		0x10
+#define   SD20_TX_SEL_MASK		0x10
+#define   DDR_VAR_SDCLK_POL_SWAP	0x01
+#define SD_CMD0				0xFDA9
+#define   SD_CMD_START			0x40
+#define SD_CMD1				0xFDAA
+#define SD_CMD2				0xFDAB
+#define SD_CMD3				0xFDAC
+#define SD_CMD4				0xFDAD
+#define SD_CMD5				0xFDAE
+#define SD_BYTE_CNT_L			0xFDAF
+#define SD_BYTE_CNT_H			0xFDB0
+#define SD_BLOCK_CNT_L			0xFDB1
+#define SD_BLOCK_CNT_H			0xFDB2
+#define SD_TRANSFER			0xFDB3
+#define   SD_TRANSFER_START		0x80
+#define   SD_TRANSFER_END		0x40
+#define   SD_STAT_IDLE			0x20
+#define   SD_TRANSFER_ERR		0x10
+#define   SD_TM_NORMAL_WRITE		0x00
+#define   SD_TM_AUTO_WRITE_3		0x01
+#define   SD_TM_AUTO_WRITE_4		0x02
+#define   SD_TM_AUTO_READ_3		0x05
+#define   SD_TM_AUTO_READ_4		0x06
+#define   SD_TM_CMD_RSP			0x08
+#define   SD_TM_AUTO_WRITE_1		0x09
+#define   SD_TM_AUTO_WRITE_2		0x0A
+#define   SD_TM_NORMAL_READ		0x0C
+#define   SD_TM_AUTO_READ_1		0x0D
+#define   SD_TM_AUTO_READ_2		0x0E
+#define   SD_TM_AUTO_TUNING		0x0F
+#define SD_CMD_STATE			0xFDB5
+#define   SD_CMD_IDLE			0x80
+
+#define SD_DATA_STATE			0xFDB6
+#define   SD_DATA_IDLE			0x80
+#define REG_SD_STOP_SDCLK_CFG		0xFDB8
+#define   SD30_CLK_STOP_CFG_EN		0x04
+#define   SD30_CLK_STOP_CFG1		0x02
+#define   SD30_CLK_STOP_CFG0		0x01
+#define REG_PRE_RW_MODE			0xFD70
+#define EN_INFINITE_MODE		0x01
+
+#define SRCTL				0xFC13
+
+#define DCM_DRP_CTL			0xFC23
+#define   DCM_RESET			0x08
+#define   DCM_LOCKED			0x04
+#define   DCM_208M			0x00
+#define   DCM_TX			0x01
+#define   DCM_RX			0x02
+#define DCM_DRP_TRIG			0xFC24
+#define   DRP_START			0x80
+#define   DRP_DONE			0x40
+#define DCM_DRP_CFG			0xFC25
+#define   DRP_WRITE			0x80
+#define   DRP_READ			0x00
+#define   DCM_WRITE_ADDRESS_50		0x50
+#define   DCM_WRITE_ADDRESS_51		0x51
+#define   DCM_READ_ADDRESS_00		0x00
+#define   DCM_READ_ADDRESS_51		0x51
+#define DCM_DRP_WR_DATA_L		0xFC26
+#define DCM_DRP_WR_DATA_H		0xFC27
+#define DCM_DRP_RD_DATA_L		0xFC28
+#define DCM_DRP_RD_DATA_H		0xFC29
+#define SD_VPCLK0_CTL			0xFC2A
+#define SD_VPCLK1_CTL			0xFC2B
+#define   PHASE_SELECT_MASK		0x1F
+#define SD_DCMPS0_CTL			0xFC2C
+#define SD_DCMPS1_CTL			0xFC2D
+#define SD_VPTX_CTL			SD_VPCLK0_CTL
+#define SD_VPRX_CTL			SD_VPCLK1_CTL
+#define   PHASE_CHANGE			0x80
+#define   PHASE_NOT_RESET		0x40
+#define SD_DCMPS_TX_CTL			SD_DCMPS0_CTL
+#define SD_DCMPS_RX_CTL			SD_DCMPS1_CTL
+#define   DCMPS_CHANGE			0x80
+#define   DCMPS_CHANGE_DONE		0x40
+#define   DCMPS_ERROR			0x20
+#define   DCMPS_CURRENT_PHASE		0x1F
+#define CARD_CLK_SOURCE			0xFC2E
+#define   CRC_FIX_CLK			(0x00 << 0)
+#define   CRC_VAR_CLK0			(0x01 << 0)
+#define   CRC_VAR_CLK1			(0x02 << 0)
+#define   SD30_FIX_CLK			(0x00 << 2)
+#define   SD30_VAR_CLK0			(0x01 << 2)
+#define   SD30_VAR_CLK1			(0x02 << 2)
+#define   SAMPLE_FIX_CLK		(0x00 << 4)
+#define   SAMPLE_VAR_CLK0		(0x01 << 4)
+#define   SAMPLE_VAR_CLK1		(0x02 << 4)
+#define CARD_PWR_CTL			0xFD50
+#define   PMOS_STRG_MASK		0x10
+#define   PMOS_STRG_800mA		0x10
+#define   PMOS_STRG_400mA		0x00
+#define   SD_POWER_OFF			0x03
+#define   SD_PARTIAL_POWER_ON		0x01
+#define   SD_POWER_ON			0x00
+#define   SD_POWER_MASK			0x03
+#define   MS_POWER_OFF			0x0C
+#define   MS_PARTIAL_POWER_ON		0x04
+#define   MS_POWER_ON			0x00
+#define   MS_POWER_MASK			0x0C
+#define   BPP_POWER_OFF			0x0F
+#define   BPP_POWER_5_PERCENT_ON	0x0E
+#define   BPP_POWER_10_PERCENT_ON	0x0C
+#define   BPP_POWER_15_PERCENT_ON	0x08
+#define   BPP_POWER_ON			0x00
+#define   BPP_POWER_MASK		0x0F
+#define   SD_VCC_PARTIAL_POWER_ON	0x02
+#define   SD_VCC_POWER_ON		0x00
+#define CARD_CLK_SWITCH			0xFD51
+#define RTL8411B_PACKAGE_MODE		0xFD51
+#define CARD_SHARE_MODE			0xFD52
+#define   CARD_SHARE_MASK		0x0F
+#define   CARD_SHARE_MULTI_LUN		0x00
+#define   CARD_SHARE_NORMAL		0x00
+#define   CARD_SHARE_48_SD		0x04
+#define   CARD_SHARE_48_MS		0x08
+#define   CARD_SHARE_BAROSSA_SD		0x01
+#define   CARD_SHARE_BAROSSA_MS		0x02
+#define CARD_DRIVE_SEL			0xFD53
+#define   MS_DRIVE_8mA			(0x01 << 6)
+#define   MMC_DRIVE_8mA			(0x01 << 4)
+#define   XD_DRIVE_8mA			(0x01 << 2)
+#define   GPIO_DRIVE_8mA		0x01
+#define RTS5209_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+					XD_DRIVE_8mA | GPIO_DRIVE_8mA)
+#define RTL8411_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+					XD_DRIVE_8mA)
+#define RTSX_CARD_DRIVE_DEFAULT		(MS_DRIVE_8mA | GPIO_DRIVE_8mA)
+
+#define CARD_STOP			0xFD54
+#define   SPI_STOP			0x01
+#define   XD_STOP			0x02
+#define   SD_STOP			0x04
+#define   MS_STOP			0x08
+#define   SPI_CLR_ERR			0x10
+#define   XD_CLR_ERR			0x20
+#define   SD_CLR_ERR			0x40
+#define   MS_CLR_ERR			0x80
+#define CARD_OE				0xFD55
+#define   SD_OUTPUT_EN			0x04
+#define   MS_OUTPUT_EN			0x08
+#define CARD_AUTO_BLINK			0xFD56
+#define CARD_GPIO_DIR			0xFD57
+#define CARD_GPIO			0xFD58
+#define CARD_DATA_SOURCE		0xFD5B
+#define   PINGPONG_BUFFER		0x01
+#define   RING_BUFFER			0x00
+#define SD30_CLK_DRIVE_SEL		0xFD5A
+#define   DRIVER_TYPE_A			0x05
+#define   DRIVER_TYPE_B			0x03
+#define   DRIVER_TYPE_C			0x02
+#define   DRIVER_TYPE_D			0x01
+#define CARD_SELECT			0xFD5C
+#define   SD_MOD_SEL			2
+#define   MS_MOD_SEL			3
+#define SD30_DRIVE_SEL			0xFD5E
+#define   CFG_DRIVER_TYPE_A		0x02
+#define   CFG_DRIVER_TYPE_B		0x03
+#define   CFG_DRIVER_TYPE_C		0x01
+#define   CFG_DRIVER_TYPE_D		0x00
+#define SD30_CMD_DRIVE_SEL		0xFD5E
+#define SD30_DAT_DRIVE_SEL		0xFD5F
+#define CARD_CLK_EN			0xFD69
+#define   SD_CLK_EN			0x04
+#define   MS_CLK_EN			0x08
+#define   SD40_CLK_EN		0x10
+#define SDIO_CTRL			0xFD6B
+#define CD_PAD_CTL			0xFD73
+#define   CD_DISABLE_MASK		0x07
+#define   MS_CD_DISABLE			0x04
+#define   SD_CD_DISABLE			0x02
+#define   XD_CD_DISABLE			0x01
+#define   CD_DISABLE			0x07
+#define   CD_ENABLE			0x00
+#define   MS_CD_EN_ONLY			0x03
+#define   SD_CD_EN_ONLY			0x05
+#define   XD_CD_EN_ONLY			0x06
+#define   FORCE_CD_LOW_MASK		0x38
+#define   FORCE_CD_XD_LOW		0x08
+#define   FORCE_CD_SD_LOW		0x10
+#define   FORCE_CD_MS_LOW		0x20
+#define   CD_AUTO_DISABLE		0x40
+#define FPDCTL				0xFC00
+#define   SSC_POWER_DOWN		0x01
+#define   SD_OC_POWER_DOWN		0x02
+#define   ALL_POWER_DOWN		0x03
+#define   OC_POWER_DOWN			0x02
+#define PDINFO				0xFC01
+
+#define CLK_CTL				0xFC02
+#define   CHANGE_CLK			0x01
+#define   CLK_LOW_FREQ			0x01
+
+#define CLK_DIV				0xFC03
+#define   CLK_DIV_1			0x01
+#define   CLK_DIV_2			0x02
+#define   CLK_DIV_4			0x03
+#define   CLK_DIV_8			0x04
+#define CLK_SEL				0xFC04
+
+#define SSC_DIV_N_0			0xFC0F
+#define SSC_DIV_N_1			0xFC10
+#define SSC_CTL1			0xFC11
+#define    SSC_RSTB			0x80
+#define    SSC_8X_EN			0x40
+#define    SSC_FIX_FRAC			0x20
+#define    SSC_SEL_1M			0x00
+#define    SSC_SEL_2M			0x08
+#define    SSC_SEL_4M			0x10
+#define    SSC_SEL_8M			0x18
+#define SSC_CTL2			0xFC12
+#define    SSC_DEPTH_MASK		0x07
+#define    SSC_DEPTH_DISALBE		0x00
+#define    SSC_DEPTH_4M			0x01
+#define    SSC_DEPTH_2M			0x02
+#define    SSC_DEPTH_1M			0x03
+#define    SSC_DEPTH_500K		0x04
+#define    SSC_DEPTH_250K		0x05
+#define RCCTL				0xFC14
+
+#define FPGA_PULL_CTL			0xFC1D
+#define OLT_LED_CTL			0xFC1E
+#define   LED_SHINE_MASK		0x08
+#define   LED_SHINE_EN			0x08
+#define   LED_SHINE_DISABLE		0x00
+#define GPIO_CTL			0xFC1F
+
+#define LDO_CTL				0xFC1E
+#define   BPP_ASIC_1V7			0x00
+#define   BPP_ASIC_1V8			0x01
+#define   BPP_ASIC_1V9			0x02
+#define   BPP_ASIC_2V0			0x03
+#define   BPP_ASIC_2V7			0x04
+#define   BPP_ASIC_2V8			0x05
+#define   BPP_ASIC_3V2			0x06
+#define   BPP_ASIC_3V3			0x07
+#define   BPP_REG_TUNED18		0x07
+#define   BPP_TUNED18_SHIFT_8402	5
+#define   BPP_TUNED18_SHIFT_8411	4
+#define   BPP_PAD_MASK			0x04
+#define   BPP_PAD_3V3			0x04
+#define   BPP_PAD_1V8			0x00
+#define   BPP_LDO_POWB			0x03
+#define   BPP_LDO_ON			0x00
+#define   BPP_LDO_SUSPEND		0x02
+#define   BPP_LDO_OFF			0x03
+#define EFUSE_CTL			0xFC30
+#define EFUSE_ADD			0xFC31
+#define SYS_VER				0xFC32
+#define EFUSE_DATAL			0xFC34
+#define EFUSE_DATAH			0xFC35
+
+#define CARD_PULL_CTL1			0xFD60
+#define CARD_PULL_CTL2			0xFD61
+#define CARD_PULL_CTL3			0xFD62
+#define CARD_PULL_CTL4			0xFD63
+#define CARD_PULL_CTL5			0xFD64
+#define CARD_PULL_CTL6			0xFD65
+
+/* PCI Express Related Registers */
+#define IRQEN0				0xFE20
+#define IRQSTAT0			0xFE21
+#define    DMA_DONE_INT			0x80
+#define    SUSPEND_INT			0x40
+#define    LINK_RDY_INT			0x20
+#define    LINK_DOWN_INT		0x10
+#define IRQEN1				0xFE22
+#define IRQSTAT1			0xFE23
+#define TLPRIEN				0xFE24
+#define TLPRISTAT			0xFE25
+#define TLPTIEN				0xFE26
+#define TLPTISTAT			0xFE27
+#define DMATC0				0xFE28
+#define DMATC1				0xFE29
+#define DMATC2				0xFE2A
+#define DMATC3				0xFE2B
+#define DMACTL				0xFE2C
+#define   DMA_RST			0x80
+#define   DMA_BUSY			0x04
+#define   DMA_DIR_TO_CARD		0x00
+#define   DMA_DIR_FROM_CARD		0x02
+#define   DMA_EN			0x01
+#define   DMA_128			(0 << 4)
+#define   DMA_256			(1 << 4)
+#define   DMA_512			(2 << 4)
+#define   DMA_1024			(3 << 4)
+#define   DMA_PACK_SIZE_MASK		0x30
+#define BCTL				0xFE2D
+#define RBBC0				0xFE2E
+#define RBBC1				0xFE2F
+#define RBDAT				0xFE30
+#define RBCTL				0xFE34
+#define   U_AUTO_DMA_EN_MASK		0x20
+#define   U_AUTO_DMA_DISABLE		0x00
+#define   RB_FLUSH			0x80
+#define CFGADDR0			0xFE35
+#define CFGADDR1			0xFE36
+#define CFGDATA0			0xFE37
+#define CFGDATA1			0xFE38
+#define CFGDATA2			0xFE39
+#define CFGDATA3			0xFE3A
+#define CFGRWCTL			0xFE3B
+#define PHYRWCTL			0xFE3C
+#define PHYDATA0			0xFE3D
+#define PHYDATA1			0xFE3E
+#define PHYADDR				0xFE3F
+#define MSGRXDATA0			0xFE40
+#define MSGRXDATA1			0xFE41
+#define MSGRXDATA2			0xFE42
+#define MSGRXDATA3			0xFE43
+#define MSGTXDATA0			0xFE44
+#define MSGTXDATA1			0xFE45
+#define MSGTXDATA2			0xFE46
+#define MSGTXDATA3			0xFE47
+#define MSGTXCTL			0xFE48
+#define LTR_CTL				0xFE4A
+#define LTR_TX_EN_MASK		BIT(7)
+#define LTR_TX_EN_1			BIT(7)
+#define LTR_TX_EN_0			0
+#define LTR_LATENCY_MODE_MASK		BIT(6)
+#define LTR_LATENCY_MODE_HW		0
+#define LTR_LATENCY_MODE_SW		BIT(6)
+#define OBFF_CFG			0xFE4C
+#define   OBFF_EN_MASK			0x03
+#define   OBFF_DISABLE			0x00
+
+#define CDRESUMECTL			0xFE52
+#define WAKE_SEL_CTL			0xFE54
+#define PCLK_CTL			0xFE55
+#define   PCLK_MODE_SEL			0x20
+#define PME_FORCE_CTL			0xFE56
+
+#define ASPM_FORCE_CTL			0xFE57
+#define   FORCE_ASPM_CTL0		0x10
+#define   FORCE_ASPM_VAL_MASK		0x03
+#define   FORCE_ASPM_L1_EN		0x02
+#define   FORCE_ASPM_L0_EN		0x01
+#define   FORCE_ASPM_NO_ASPM		0x00
+#define PM_CLK_FORCE_CTL		0xFE58
+#define   CLK_PM_EN			0x01
+#define FUNC_FORCE_CTL			0xFE59
+#define   FUNC_FORCE_UPME_XMT_DBG	0x02
+#define PERST_GLITCH_WIDTH		0xFE5C
+#define CHANGE_LINK_STATE		0xFE5B
+#define RESET_LOAD_REG			0xFE5E
+#define EFUSE_CONTENT			0xFE5F
+#define HOST_SLEEP_STATE		0xFE60
+#define   HOST_ENTER_S1			1
+#define   HOST_ENTER_S3			2
+
+#define SDIO_CFG			0xFE70
+#define PM_EVENT_DEBUG			0xFE71
+#define   PME_DEBUG_0			0x08
+#define NFTS_TX_CTRL			0xFE72
+
+#define PWR_GATE_CTRL			0xFE75
+#define   PWR_GATE_EN			0x01
+#define   LDO3318_PWR_MASK		0x06
+#define   LDO_ON			0x00
+#define   LDO_SUSPEND			0x04
+#define   LDO_OFF			0x06
+#define PWD_SUSPEND_EN			0xFE76
+#define LDO_PWR_SEL			0xFE78
+
+#define L1SUB_CONFIG1			0xFE8D
+#define   AUX_CLK_ACTIVE_SEL_MASK	0x01
+#define   MAC_CKSW_DONE			0x00
+#define L1SUB_CONFIG2			0xFE8E
+#define   L1SUB_AUTO_CFG		0x02
+#define L1SUB_CONFIG3			0xFE8F
+#define   L1OFF_MBIAS2_EN_5250		BIT(7)
+
+#define DUMMY_REG_RESET_0		0xFE90
+#define   IC_VERSION_MASK		0x0F
+
+#define REG_VREF			0xFE97
+#define   PWD_SUSPND_EN			0x10
+#define RTS5260_DMA_RST_CTL_0		0xFEBF
+#define   RTS5260_DMA_RST		0x80
+#define   RTS5260_ADMA3_RST		0x40
+#define AUTOLOAD_CFG_BASE		0xFF00
+#define RELINK_TIME_MASK		0x01
+#define PETXCFG				0xFF03
+#define FORCE_CLKREQ_DELINK_MASK	BIT(7)
+#define FORCE_CLKREQ_LOW	0x80
+#define FORCE_CLKREQ_HIGH	0x00
+
+#define PM_CTRL1			0xFF44
+#define   CD_RESUME_EN_MASK		0xF0
+
+#define PM_CTRL2			0xFF45
+#define PM_CTRL3			0xFF46
+#define   SDIO_SEND_PME_EN		0x80
+#define   FORCE_RC_MODE_ON		0x40
+#define   FORCE_RX50_LINK_ON		0x20
+#define   D3_DELINK_MODE_EN		0x10
+#define   USE_PESRTB_CTL_DELINK		0x08
+#define   DELAY_PIN_WAKE		0x04
+#define   RESET_PIN_WAKE		0x02
+#define   PM_WAKE_EN			0x01
+#define PM_CTRL4			0xFF47
+
+/* Memory mapping */
+#define SRAM_BASE			0xE600
+#define RBUF_BASE			0xF400
+#define PPBUF_BASE1			0xF800
+#define PPBUF_BASE2			0xFA00
+#define IMAGE_FLAG_ADDR0		0xCE80
+#define IMAGE_FLAG_ADDR1		0xCE81
+
+#define RREF_CFG			0xFF6C
+#define   RREF_VBGSEL_MASK		0x38
+#define   RREF_VBGSEL_1V25		0x28
+
+#define OOBS_CONFIG			0xFF6E
+#define   OOBS_AUTOK_DIS		0x80
+#define   OOBS_VAL_MASK			0x1F
+
+#define LDO_DV18_CFG			0xFF70
+#define   LDO_DV18_SR_MASK		0xC0
+#define   LDO_DV18_SR_DF		0x40
+#define   DV331812_MASK			0x70
+#define   DV331812_33			0x70
+#define   DV331812_17			0x30
+
+#define LDO_CONFIG2			0xFF71
+#define   LDO_D3318_MASK		0x07
+#define   LDO_D3318_33V			0x07
+#define   LDO_D3318_18V			0x02
+#define   DV331812_VDD1			0x04
+#define   DV331812_POWERON		0x08
+#define   DV331812_POWEROFF		0x00
+
+#define LDO_VCC_CFG0			0xFF72
+#define   LDO_VCC_LMTVTH_MASK		0x30
+#define   LDO_VCC_LMTVTH_2A		0x10
+/*RTS5260*/
+#define   RTS5260_DVCC_TUNE_MASK	0x70
+#define   RTS5260_DVCC_33		0x70
+
+#define LDO_VCC_CFG1			0xFF73
+#define   LDO_VCC_REF_TUNE_MASK		0x30
+#define   LDO_VCC_REF_1V2		0x20
+#define   LDO_VCC_TUNE_MASK		0x07
+#define   LDO_VCC_1V8			0x04
+#define   LDO_VCC_3V3			0x07
+#define   LDO_VCC_LMT_EN		0x08
+/*RTS5260*/
+#define	  LDO_POW_SDVDD1_MASK		0x08
+#define	  LDO_POW_SDVDD1_ON		0x08
+#define	  LDO_POW_SDVDD1_OFF		0x00
+
+#define LDO_VIO_CFG			0xFF75
+#define   LDO_VIO_SR_MASK		0xC0
+#define   LDO_VIO_SR_DF			0x40
+#define   LDO_VIO_REF_TUNE_MASK		0x30
+#define   LDO_VIO_REF_1V2		0x20
+#define   LDO_VIO_TUNE_MASK		0x07
+#define   LDO_VIO_1V7			0x03
+#define   LDO_VIO_1V8			0x04
+#define   LDO_VIO_3V3			0x07
+
+#define LDO_DV12S_CFG			0xFF76
+#define   LDO_REF12_TUNE_MASK		0x18
+#define   LDO_REF12_TUNE_DF		0x10
+#define   LDO_D12_TUNE_MASK		0x07
+#define   LDO_D12_TUNE_DF		0x04
+
+#define LDO_AV12S_CFG			0xFF77
+#define   LDO_AV12S_TUNE_MASK		0x07
+#define   LDO_AV12S_TUNE_DF		0x04
+
+#define SD40_LDO_CTL1			0xFE7D
+#define   SD40_VIO_TUNE_MASK		0x70
+#define   SD40_VIO_TUNE_1V7		0x30
+#define   SD_VIO_LDO_1V8		0x40
+#define   SD_VIO_LDO_3V3		0x70
+
+#define RTS5260_AUTOLOAD_CFG4		0xFF7F
+#define   RTS5260_MIMO_DISABLE		0x8A
+
+#define RTS5260_REG_GPIO_CTL0		0xFC1A
+#define   RTS5260_REG_GPIO_MASK		0x01
+#define   RTS5260_REG_GPIO_ON		0x01
+#define   RTS5260_REG_GPIO_OFF		0x00
+
+#define PWR_GLOBAL_CTRL			0xF200
+#define PCIE_L1_2_EN			0x0C
+#define PCIE_L1_1_EN			0x0A
+#define PCIE_L1_0_EN			0x09
+#define PWR_FE_CTL			0xF201
+#define PCIE_L1_2_PD_FE_EN		0x0C
+#define PCIE_L1_1_PD_FE_EN		0x0A
+#define PCIE_L1_0_PD_FE_EN		0x09
+#define CFG_PCIE_APHY_OFF_0		0xF204
+#define CFG_PCIE_APHY_OFF_0_DEFAULT	0xBF
+#define CFG_PCIE_APHY_OFF_1		0xF205
+#define CFG_PCIE_APHY_OFF_1_DEFAULT	0xFF
+#define CFG_PCIE_APHY_OFF_2		0xF206
+#define CFG_PCIE_APHY_OFF_2_DEFAULT	0x01
+#define CFG_PCIE_APHY_OFF_3		0xF207
+#define CFG_PCIE_APHY_OFF_3_DEFAULT	0x00
+#define CFG_L1_0_PCIE_MAC_RET_VALUE	0xF20C
+#define CFG_L1_0_PCIE_DPHY_RET_VALUE	0xF20E
+#define CFG_L1_0_SYS_RET_VALUE		0xF210
+#define CFG_L1_0_CRC_MISC_RET_VALUE	0xF212
+#define CFG_L1_0_CRC_SD30_RET_VALUE	0xF214
+#define CFG_L1_0_CRC_SD40_RET_VALUE	0xF216
+#define CFG_LP_FPWM_VALUE		0xF219
+#define CFG_LP_FPWM_VALUE_DEFAULT	0x18
+#define PWC_CDR				0xF253
+#define PWC_CDR_DEFAULT			0x03
+#define CFG_L1_0_RET_VALUE_DEFAULT	0x1B
+#define CFG_L1_0_CRC_MISC_RET_VALUE_DEFAULT	0x0C
+
+/* OCPCTL */
+#define SD_DETECT_EN			0x08
+#define SD_OCP_INT_EN			0x04
+#define SD_OCP_INT_CLR			0x02
+#define SD_OC_CLR			0x01
+
+#define SDVIO_DETECT_EN			(1 << 7)
+#define SDVIO_OCP_INT_EN		(1 << 6)
+#define SDVIO_OCP_INT_CLR		(1 << 5)
+#define SDVIO_OC_CLR			(1 << 4)
+
+/* OCPSTAT */
+#define SD_OCP_DETECT			0x08
+#define SD_OC_NOW			0x04
+#define SD_OC_EVER			0x02
+
+#define SDVIO_OC_NOW			(1 << 6)
+#define SDVIO_OC_EVER			(1 << 5)
+
+#define REG_OCPCTL			0xFD6A
+#define REG_OCPSTAT			0xFD6E
+#define REG_OCPGLITCH			0xFD6C
+#define REG_OCPPARA1			0xFD6B
+#define REG_OCPPARA2			0xFD6D
+
+/* rts5260 DV3318 OCP-related registers */
+#define REG_DV3318_OCPCTL		0xFD89
+#define DV3318_OCP_TIME_MASK	0xF0
+#define DV3318_DETECT_EN		0x08
+#define DV3318_OCP_INT_EN		0x04
+#define DV3318_OCP_INT_CLR		0x02
+#define DV3318_OCP_CLR			0x01
+
+#define REG_DV3318_OCPSTAT		0xFD8A
+#define DV3318_OCP_GlITCH_TIME_MASK	0xF0
+#define DV3318_OCP_DETECT		0x08
+#define DV3318_OCP_NOW			0x04
+#define DV3318_OCP_EVER			0x02
+
+#define SD_OCP_GLITCH_MASK		0x0F
+
+/* OCPPARA1 */
+#define SDVIO_OCP_TIME_60		0x00
+#define SDVIO_OCP_TIME_100		0x10
+#define SDVIO_OCP_TIME_200		0x20
+#define SDVIO_OCP_TIME_400		0x30
+#define SDVIO_OCP_TIME_600		0x40
+#define SDVIO_OCP_TIME_800		0x50
+#define SDVIO_OCP_TIME_1100		0x60
+#define SDVIO_OCP_TIME_MASK		0x70
+
+#define SD_OCP_TIME_60			0x00
+#define SD_OCP_TIME_100			0x01
+#define SD_OCP_TIME_200			0x02
+#define SD_OCP_TIME_400			0x03
+#define SD_OCP_TIME_600			0x04
+#define SD_OCP_TIME_800			0x05
+#define SD_OCP_TIME_1100		0x06
+#define SD_OCP_TIME_MASK		0x07
+
+/* OCPPARA2 */
+#define SDVIO_OCP_THD_190		0x00
+#define SDVIO_OCP_THD_250		0x10
+#define SDVIO_OCP_THD_320		0x20
+#define SDVIO_OCP_THD_380		0x30
+#define SDVIO_OCP_THD_440		0x40
+#define SDVIO_OCP_THD_500		0x50
+#define SDVIO_OCP_THD_570		0x60
+#define SDVIO_OCP_THD_630		0x70
+#define SDVIO_OCP_THD_MASK		0x70
+
+#define SD_OCP_THD_450			0x00
+#define SD_OCP_THD_550			0x01
+#define SD_OCP_THD_650			0x02
+#define SD_OCP_THD_750			0x03
+#define SD_OCP_THD_850			0x04
+#define SD_OCP_THD_950			0x05
+#define SD_OCP_THD_1050			0x06
+#define SD_OCP_THD_1150			0x07
+#define SD_OCP_THD_MASK			0x07
+
+#define SDVIO_OCP_GLITCH_MASK		0xF0
+#define SDVIO_OCP_GLITCH_NONE		0x00
+#define SDVIO_OCP_GLITCH_50U		0x10
+#define SDVIO_OCP_GLITCH_100U		0x20
+#define SDVIO_OCP_GLITCH_200U		0x30
+#define SDVIO_OCP_GLITCH_600U		0x40
+#define SDVIO_OCP_GLITCH_800U		0x50
+#define SDVIO_OCP_GLITCH_1M		0x60
+#define SDVIO_OCP_GLITCH_2M		0x70
+#define SDVIO_OCP_GLITCH_3M		0x80
+#define SDVIO_OCP_GLITCH_4M		0x90
+#define SDVIO_OCP_GLIVCH_5M		0xA0
+#define SDVIO_OCP_GLITCH_6M		0xB0
+#define SDVIO_OCP_GLITCH_7M		0xC0
+#define SDVIO_OCP_GLITCH_8M		0xD0
+#define SDVIO_OCP_GLITCH_9M		0xE0
+#define SDVIO_OCP_GLITCH_10M		0xF0
+
+#define SD_OCP_GLITCH_MASK		0x0F
+#define SD_OCP_GLITCH_NONE		0x00
+#define SD_OCP_GLITCH_50U		0x01
+#define SD_OCP_GLITCH_100U		0x02
+#define SD_OCP_GLITCH_200U		0x03
+#define SD_OCP_GLITCH_600U		0x04
+#define SD_OCP_GLITCH_800U		0x05
+#define SD_OCP_GLITCH_1M		0x06
+#define SD_OCP_GLITCH_2M		0x07
+#define SD_OCP_GLITCH_3M		0x08
+#define SD_OCP_GLITCH_4M		0x09
+#define SD_OCP_GLIVCH_5M		0x0A
+#define SD_OCP_GLITCH_6M		0x0B
+#define SD_OCP_GLITCH_7M		0x0C
+#define SD_OCP_GLITCH_8M		0x0D
+#define SD_OCP_GLITCH_9M		0x0E
+#define SD_OCP_GLITCH_10M		0x0F
+
+/* Phy register */
+#define PHY_PCR				0x00
+#define   PHY_PCR_FORCE_CODE		0xB000
+#define   PHY_PCR_OOBS_CALI_50		0x0800
+#define   PHY_PCR_OOBS_VCM_08		0x0200
+#define   PHY_PCR_OOBS_SEN_90		0x0040
+#define   PHY_PCR_RSSI_EN		0x0002
+#define   PHY_PCR_RX10K			0x0001
+
+#define PHY_RCR0			0x01
+#define PHY_RCR1			0x02
+#define   PHY_RCR1_ADP_TIME_4		0x0400
+#define   PHY_RCR1_VCO_COARSE		0x001F
+#define   PHY_RCR1_INIT_27S		0x0A1F
+#define PHY_SSCCR2			0x02
+#define   PHY_SSCCR2_PLL_NCODE		0x0A00
+#define   PHY_SSCCR2_TIME0		0x001C
+#define   PHY_SSCCR2_TIME2_WIDTH	0x0003
+
+#define PHY_RCR2			0x03
+#define   PHY_RCR2_EMPHASE_EN		0x8000
+#define   PHY_RCR2_NADJR		0x4000
+#define   PHY_RCR2_CDR_SR_2		0x0100
+#define   PHY_RCR2_FREQSEL_12		0x0040
+#define   PHY_RCR2_CDR_SC_12P		0x0010
+#define   PHY_RCR2_CALIB_LATE		0x0002
+#define   PHY_RCR2_INIT_27S		0xC152
+#define PHY_SSCCR3			0x03
+#define   PHY_SSCCR3_STEP_IN		0x2740
+#define   PHY_SSCCR3_CHECK_DELAY	0x0008
+#define _PHY_ANA03			0x03
+#define   _PHY_ANA03_TIMER_MAX		0x2700
+#define   _PHY_ANA03_OOBS_DEB_EN	0x0040
+#define   _PHY_CMU_DEBUG_EN		0x0008
+
+#define PHY_RTCR			0x04
+#define PHY_RDR				0x05
+#define   PHY_RDR_RXDSEL_1_9		0x4000
+#define   PHY_SSC_AUTO_PWD		0x0600
+#define PHY_TCR0			0x06
+#define PHY_TCR1			0x07
+#define PHY_TUNE			0x08
+#define   PHY_TUNE_TUNEREF_1_0		0x4000
+#define   PHY_TUNE_VBGSEL_1252		0x0C00
+#define   PHY_TUNE_SDBUS_33		0x0200
+#define   PHY_TUNE_TUNED18		0x01C0
+#define   PHY_TUNE_TUNED12		0X0020
+#define   PHY_TUNE_TUNEA12		0x0004
+#define   PHY_TUNE_VOLTAGE_MASK		0xFC3F
+#define   PHY_TUNE_VOLTAGE_3V3		0x03C0
+#define   PHY_TUNE_D18_1V8		0x0100
+#define   PHY_TUNE_D18_1V7		0x0080
+#define PHY_ANA08			0x08
+#define   PHY_ANA08_RX_EQ_DCGAIN	0x5000
+#define   PHY_ANA08_SEL_RX_EN		0x0400
+#define   PHY_ANA08_RX_EQ_VAL		0x03C0
+#define   PHY_ANA08_SCP			0x0020
+#define   PHY_ANA08_SEL_IPI		0x0004
+
+#define PHY_IMR				0x09
+#define PHY_BPCR			0x0A
+#define   PHY_BPCR_IBRXSEL		0x0400
+#define   PHY_BPCR_IBTXSEL		0x0100
+#define   PHY_BPCR_IB_FILTER		0x0080
+#define   PHY_BPCR_CMIRROR_EN		0x0040
+
+#define PHY_BIST			0x0B
+#define PHY_RAW_L			0x0C
+#define PHY_RAW_H			0x0D
+#define PHY_RAW_DATA			0x0E
+#define PHY_HOST_CLK_CTRL		0x0F
+#define PHY_DMR				0x10
+#define PHY_BACR			0x11
+#define   PHY_BACR_BASIC_MASK		0xFFF3
+#define PHY_IER				0x12
+#define PHY_BCSR			0x13
+#define PHY_BPR				0x14
+#define PHY_BPNR2			0x15
+#define PHY_BPNR			0x16
+#define PHY_BRNR2			0x17
+#define PHY_BENR			0x18
+#define PHY_REV				0x19
+#define   PHY_REV_RESV			0xE000
+#define   PHY_REV_RXIDLE_LATCHED	0x1000
+#define   PHY_REV_P1_EN			0x0800
+#define   PHY_REV_RXIDLE_EN		0x0400
+#define   PHY_REV_CLKREQ_TX_EN		0x0200
+#define   PHY_REV_CLKREQ_RX_EN		0x0100
+#define   PHY_REV_CLKREQ_DT_1_0		0x0040
+#define   PHY_REV_STOP_CLKRD		0x0020
+#define   PHY_REV_RX_PWST		0x0008
+#define   PHY_REV_STOP_CLKWR		0x0004
+#define _PHY_REV0			0x19
+#define   _PHY_REV0_FILTER_OUT		0x3800
+#define   _PHY_REV0_CDR_BYPASS_PFD	0x0100
+#define   _PHY_REV0_CDR_RX_IDLE_BYPASS	0x0002
+
+#define PHY_FLD0			0x1A
+#define PHY_ANA1A			0x1A
+#define   PHY_ANA1A_TXR_LOOPBACK	0x2000
+#define   PHY_ANA1A_RXT_BIST		0x0500
+#define   PHY_ANA1A_TXR_BIST		0x0040
+#define   PHY_ANA1A_REV			0x0006
+#define   PHY_FLD0_INIT_27S		0x2546
+#define PHY_FLD1			0x1B
+#define PHY_FLD2			0x1C
+#define PHY_FLD3			0x1D
+#define   PHY_FLD3_TIMER_4		0x0800
+#define   PHY_FLD3_TIMER_6		0x0020
+#define   PHY_FLD3_RXDELINK		0x0004
+#define   PHY_FLD3_INIT_27S		0x0004
+#define PHY_ANA1D			0x1D
+#define   PHY_ANA1D_DEBUG_ADDR		0x0004
+#define _PHY_FLD0			0x1D
+#define   _PHY_FLD0_CLK_REQ_20C		0x8000
+#define   _PHY_FLD0_RX_IDLE_EN		0x1000
+#define   _PHY_FLD0_BIT_ERR_RSTN	0x0800
+#define   _PHY_FLD0_BER_COUNT		0x01E0
+#define   _PHY_FLD0_BER_TIMER		0x001E
+#define   _PHY_FLD0_CHECK_EN		0x0001
+
+#define PHY_FLD4			0x1E
+#define   PHY_FLD4_FLDEN_SEL		0x4000
+#define   PHY_FLD4_REQ_REF		0x2000
+#define   PHY_FLD4_RXAMP_OFF		0x1000
+#define   PHY_FLD4_REQ_ADDA		0x0800
+#define   PHY_FLD4_BER_COUNT		0x00E0
+#define   PHY_FLD4_BER_TIMER		0x000A
+#define   PHY_FLD4_BER_CHK_EN		0x0001
+#define   PHY_FLD4_INIT_27S		0x5C7F
+#define PHY_DIG1E			0x1E
+#define   PHY_DIG1E_REV			0x4000
+#define   PHY_DIG1E_D0_X_D1		0x1000
+#define   PHY_DIG1E_RX_ON_HOST		0x0800
+#define   PHY_DIG1E_RCLK_REF_HOST	0x0400
+#define   PHY_DIG1E_RCLK_TX_EN_KEEP	0x0040
+#define   PHY_DIG1E_RCLK_TX_TERM_KEEP	0x0020
+#define   PHY_DIG1E_RCLK_RX_EIDLE_ON	0x0010
+#define   PHY_DIG1E_TX_TERM_KEEP	0x0008
+#define   PHY_DIG1E_RX_TERM_KEEP	0x0004
+#define   PHY_DIG1E_TX_EN_KEEP		0x0002
+#define   PHY_DIG1E_RX_EN_KEEP		0x0001
+#define PHY_DUM_REG			0x1F
+
+#define PCR_ASPM_SETTING_REG1		0x160
+#define PCR_ASPM_SETTING_REG2		0x168
+#define PCR_ASPM_SETTING_5260		0x178
+
+#define PCR_SETTING_REG1		0x724
+#define PCR_SETTING_REG2		0x814
+#define PCR_SETTING_REG3		0x747
+
+#define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
+
+#define RTS5227_DEVICE_ID		0x5227
+#define RTS_MAX_TIMES_FREQ_REDUCTION	8
+
+struct rtsx_pcr;
+
+struct pcr_handle {
+	struct rtsx_pcr			*pcr;
+};
+
+struct pcr_ops {
+	int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
+	int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+	int		(*extra_init_hw)(struct rtsx_pcr *pcr);
+	int		(*optimize_phy)(struct rtsx_pcr *pcr);
+	int		(*turn_on_led)(struct rtsx_pcr *pcr);
+	int		(*turn_off_led)(struct rtsx_pcr *pcr);
+	int		(*enable_auto_blink)(struct rtsx_pcr *pcr);
+	int		(*disable_auto_blink)(struct rtsx_pcr *pcr);
+	int		(*card_power_on)(struct rtsx_pcr *pcr, int card);
+	int		(*card_power_off)(struct rtsx_pcr *pcr, int card);
+	int		(*switch_output_voltage)(struct rtsx_pcr *pcr,
+						u8 voltage);
+	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
+	int		(*conv_clk_and_div_n)(int clk, int dir);
+	void		(*fetch_vendor_settings)(struct rtsx_pcr *pcr);
+	void		(*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state);
+	void		(*stop_cmd)(struct rtsx_pcr *pcr);
+
+	void (*set_aspm)(struct rtsx_pcr *pcr, bool enable);
+	int (*set_ltr_latency)(struct rtsx_pcr *pcr, u32 latency);
+	int (*set_l1off_sub)(struct rtsx_pcr *pcr, u8 val);
+	void (*set_l1off_cfg_sub_d0)(struct rtsx_pcr *pcr, int active);
+	void (*full_on)(struct rtsx_pcr *pcr);
+	void (*power_saving)(struct rtsx_pcr *pcr);
+	void (*enable_ocp)(struct rtsx_pcr *pcr);
+	void (*disable_ocp)(struct rtsx_pcr *pcr);
+	void (*init_ocp)(struct rtsx_pcr *pcr);
+	void (*process_ocp)(struct rtsx_pcr *pcr);
+	int (*get_ocpstat)(struct rtsx_pcr *pcr, u8 *val);
+	void (*clear_ocpstat)(struct rtsx_pcr *pcr);
+};
+
+enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
+
+#define ASPM_L1_1_EN_MASK		BIT(3)
+#define ASPM_L1_2_EN_MASK		BIT(2)
+#define PM_L1_1_EN_MASK		BIT(1)
+#define PM_L1_2_EN_MASK		BIT(0)
+
+#define ASPM_L1_1_EN			BIT(0)
+#define ASPM_L1_2_EN			BIT(1)
+#define PM_L1_1_EN				BIT(2)
+#define PM_L1_2_EN				BIT(3)
+#define LTR_L1SS_PWR_GATE_EN	BIT(4)
+#define L1_SNOOZE_TEST_EN		BIT(5)
+#define LTR_L1SS_PWR_GATE_CHECK_CARD_EN	BIT(6)
+
+enum dev_aspm_mode {
+	DEV_ASPM_DYNAMIC,
+	DEV_ASPM_BACKDOOR,
+	DEV_ASPM_STATIC,
+	DEV_ASPM_DISABLE,
+};
+
+/*
+ * struct rtsx_cr_option  - card reader option
+ * @dev_flags: device flags
+ * @force_clkreq_0: force clock request
+ * @ltr_en: enable ltr mode flag
+ * @ltr_enabled: ltr mode in configure space flag
+ * @ltr_active: ltr mode status
+ * @ltr_active_latency: ltr mode active latency
+ * @ltr_idle_latency: ltr mode idle latency
+ * @ltr_l1off_latency: ltr mode l1off latency
+ * @dev_aspm_mode: device aspm mode
+ * @l1_snooze_delay: l1 snooze delay
+ * @ltr_l1off_sspwrgate: ltr l1off sspwrgate
+ * @ltr_l1off_snooze_sspwrgate: ltr l1off snooze sspwrgate
+ * @ocp_en: enable ocp flag
+ * @sd_400mA_ocp_thd: 400mA ocp thd
+ * @sd_800mA_ocp_thd: 800mA ocp thd
+ */
+struct rtsx_cr_option {
+	u32 dev_flags;
+	bool force_clkreq_0;
+	bool ltr_en;
+	bool ltr_enabled;
+	bool ltr_active;
+	u32 ltr_active_latency;
+	u32 ltr_idle_latency;
+	u32 ltr_l1off_latency;
+	enum dev_aspm_mode dev_aspm_mode;
+	u32 l1_snooze_delay;
+	u8 ltr_l1off_sspwrgate;
+	u8 ltr_l1off_snooze_sspwrgate;
+	bool ocp_en;
+	u8 sd_400mA_ocp_thd;
+	u8 sd_800mA_ocp_thd;
+};
+
+/*
+ * struct rtsx_hw_param  - card reader hardware param
+ * @interrupt_en: indicate which interrutp enable
+ * @ocp_glitch: ocp glitch time
+ */
+struct rtsx_hw_param {
+	u32 interrupt_en;
+	u8 ocp_glitch;
+};
+
+#define rtsx_set_dev_flag(cr, flag) \
+	((cr)->option.dev_flags |= (flag))
+#define rtsx_clear_dev_flag(cr, flag) \
+	((cr)->option.dev_flags &= ~(flag))
+#define rtsx_check_dev_flag(cr, flag) \
+	((cr)->option.dev_flags & (flag))
+
+struct rtsx_pcr {
+	struct pci_dev			*pci;
+	unsigned int			id;
+	int				pcie_cap;
+	struct rtsx_cr_option	option;
+	struct rtsx_hw_param hw_param;
+
+	/* pci resources */
+	unsigned long			addr;
+	void __iomem			*remap_addr;
+	int				irq;
+
+	/* host reserved buffer */
+	void				*rtsx_resv_buf;
+	dma_addr_t			rtsx_resv_buf_addr;
+
+	void				*host_cmds_ptr;
+	dma_addr_t			host_cmds_addr;
+	int				ci;
+
+	void				*host_sg_tbl_ptr;
+	dma_addr_t			host_sg_tbl_addr;
+	int				sgi;
+
+	u32				bier;
+	char				trans_result;
+
+	unsigned int			card_inserted;
+	unsigned int			card_removed;
+	unsigned int			card_exist;
+
+	struct delayed_work		carddet_work;
+	struct delayed_work		idle_work;
+
+	spinlock_t			lock;
+	struct mutex			pcr_mutex;
+	struct completion		*done;
+	struct completion		*finish_me;
+
+	unsigned int			cur_clock;
+	bool				remove_pci;
+	bool				msi_en;
+
+#define EXTRA_CAPS_SD_SDR50		(1 << 0)
+#define EXTRA_CAPS_SD_SDR104		(1 << 1)
+#define EXTRA_CAPS_SD_DDR50		(1 << 2)
+#define EXTRA_CAPS_MMC_HSDDR		(1 << 3)
+#define EXTRA_CAPS_MMC_HS200		(1 << 4)
+#define EXTRA_CAPS_MMC_8BIT		(1 << 5)
+	u32				extra_caps;
+
+#define IC_VER_A			0
+#define IC_VER_B			1
+#define IC_VER_C			2
+#define IC_VER_D			3
+	u8				ic_version;
+
+	u8				sd30_drive_sel_1v8;
+	u8				sd30_drive_sel_3v3;
+	u8				card_drive_sel;
+#define ASPM_L1_EN			0x02
+	u8				aspm_en;
+	bool				aspm_enabled;
+
+#define PCR_MS_PMOS			(1 << 0)
+#define PCR_REVERSE_SOCKET		(1 << 1)
+	u32				flags;
+
+	u32				tx_initial_phase;
+	u32				rx_initial_phase;
+
+	const u32			*sd_pull_ctl_enable_tbl;
+	const u32			*sd_pull_ctl_disable_tbl;
+	const u32			*ms_pull_ctl_enable_tbl;
+	const u32			*ms_pull_ctl_disable_tbl;
+
+	const struct pcr_ops		*ops;
+	enum PDEV_STAT			state;
+
+	u16				reg_pm_ctrl3;
+
+	int				num_slots;
+	struct rtsx_slot		*slots;
+
+	u8				dma_error_count;
+	u8			ocp_stat;
+	u8			ocp_stat2;
+};
+
+#define PID_524A	0x524A
+#define PID_5249	0x5249
+#define PID_5250	0x5250
+#define PID_525A	0x525A
+#define PID_5260	0x5260
+
+#define CHK_PCI_PID(pcr, pid)		((pcr)->pci->device == (pid))
+#define PCI_VID(pcr)			((pcr)->pci->vendor)
+#define PCI_PID(pcr)			((pcr)->pci->device)
+#define is_version(pcr, pid, ver)				\
+	(CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
+#define pcr_dbg(pcr, fmt, arg...)				\
+	dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
+
+#define SDR104_PHASE(val)		((val) & 0xFF)
+#define SDR50_PHASE(val)		(((val) >> 8) & 0xFF)
+#define DDR50_PHASE(val)		(((val) >> 16) & 0xFF)
+#define SDR104_TX_PHASE(pcr)		SDR104_PHASE((pcr)->tx_initial_phase)
+#define SDR50_TX_PHASE(pcr)		SDR50_PHASE((pcr)->tx_initial_phase)
+#define DDR50_TX_PHASE(pcr)		DDR50_PHASE((pcr)->tx_initial_phase)
+#define SDR104_RX_PHASE(pcr)		SDR104_PHASE((pcr)->rx_initial_phase)
+#define SDR50_RX_PHASE(pcr)		SDR50_PHASE((pcr)->rx_initial_phase)
+#define DDR50_RX_PHASE(pcr)		DDR50_PHASE((pcr)->rx_initial_phase)
+#define SET_CLOCK_PHASE(sdr104, sdr50, ddr50)	\
+				(((ddr50) << 16) | ((sdr50) << 8) | (sdr104))
+
+void rtsx_pci_start_run(struct rtsx_pcr *pcr);
+int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data);
+int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data);
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr);
+void rtsx_pci_add_cmd(struct rtsx_pcr *pcr,
+		u8 cmd_type, u16 reg_addr, u8 mask, u8 data);
+void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr);
+int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
+int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read, int timeout);
+int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read);
+void rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read);
+int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int count, bool read, int timeout);
+int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
+int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+		u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_card_exclusive_check(struct rtsx_pcr *pcr, int card);
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage);
+unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr);
+void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr);
+
+static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
+{
+	return (u8 *)(pcr->host_cmds_ptr);
+}
+
+static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
+		u8 mask, u8 append)
+{
+	int err;
+	u8 val;
+
+	err = pci_read_config_byte(pcr->pci, addr, &val);
+	if (err < 0)
+		return err;
+	return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
+}
+
+static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
+{
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg,     0xFF, val >> 24);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
+}
+
+static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
+	u16 mask, u16 append)
+{
+	int err;
+	u16 val;
+
+	err = rtsx_pci_read_phy_register(pcr, addr, &val);
+	if (err < 0)
+		return err;
+
+	return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
+}
+
+#endif