Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/include/linux/platform_data/rtc-v3020.h b/include/linux/platform_data/rtc-v3020.h
new file mode 100644
index 000000000000..e55d82cebf80
--- /dev/null
+++ b/include/linux/platform_data/rtc-v3020.h
@@ -0,0 +1,41 @@
+/*
+ * v3020.h - Registers definition and platform data structure for the v3020 RTC.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 8D Technologies inc.
+ */
+#ifndef __LINUX_V3020_H
+#define __LINUX_V3020_H
+
+/* The v3020 has only one data pin but which one
+ * is used depends on the board. */
+struct v3020_platform_data {
+	int leftshift; /* (1<<(leftshift)) & readl() */
+
+	unsigned int use_gpio:1;
+	unsigned int gpio_cs;
+	unsigned int gpio_wr;
+	unsigned int gpio_rd;
+	unsigned int gpio_io;
+};
+
+#define V3020_STATUS_0	0x00
+#define V3020_STATUS_1	0x01
+#define V3020_SECONDS	0x02
+#define V3020_MINUTES	0x03
+#define V3020_HOURS		0x04
+#define V3020_MONTH_DAY	0x05
+#define V3020_MONTH		0x06
+#define V3020_YEAR		0x07
+#define V3020_WEEK_DAY	0x08
+#define V3020_WEEK		0x09
+
+#define V3020_IS_COMMAND(val) ((val)>=0x0E)
+
+#define V3020_CMD_RAM2CLOCK	0x0E
+#define V3020_CMD_CLOCK2RAM	0x0F
+
+#endif /* __LINUX_V3020_H */