diff options
| author | Niyas Sait <niyas.sait@linaro.org> | 2022-11-17 15:35:42 +0300 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2022-11-21 16:38:28 +0300 |
| commit | c21dd79e9909c9cf90f8b1ca8ad2753cedb6c655 (patch) | |
| tree | c0eef918a58d6b910312438c7502bf7cb46dc8b5 /include/linux/pinctrl | |
| parent | c0f358fde37a6af517850c1f90e7d4241f472da9 (diff) | |
| download | linux-c21dd79e9909c9cf90f8b1ca8ad2753cedb6c655.tar.xz | |
pinconf-generic: fix style issues in pin_config_param doc
Fixes following issues introduced in a previous commit
to clarify values for pin config pull up and down types.
- replace spaces with tabs to be consistent with rest of the doc
- use capitalization for unit (ohms -> Ohms)
Signed-off-by: Niyas Sait <niyas.sait@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117123542.1154252-1-niyas.sait@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/linux/pinctrl')
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index c9c10142657e..d74b7a4ea154 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -39,7 +39,7 @@ struct pinctrl_map; * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high * impedance to GROUND). If the argument is != 0 pull-down is enabled, * the value is interpreted by the driver and can be custom or an SI unit - * such as ohms. + * such as Ohms. * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based * on embedded knowledge of the controller hardware, like current mux * function. The pull direction and possibly strength too will normally @@ -51,7 +51,7 @@ struct pinctrl_map; * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high * impedance to VDD). If the argument is != 0 pull-up is enabled, * the value is interpreted by the driver and can be custom or an SI unit - * such as ohms. + * such as Ohms. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports * which are then pulled up with an external resistor. Setting this |