net/mlx5: FPGA, Add SBU bypass and reset flows

The Innova FPGA includes shell hardware and Sandbox-Unit (SBU) hardware.
The shell hardware is handled by mlx5_core itself, while the SBU is
handled by a client driver.

Reset the SBU to a well-known initial state when initializing a new
device, and set the FPGA to bypass mode when uninitializing a device.
This allows the client driver to assume that its device has been
reset when a new device is detected.

During SBU reset, the FPGA is put into SBU-bypass mode. In this mode
packets do not pass through the SBU, so it cannot affect the network
data stream at all.

A factory-image does not have an SBU, so skip these flows.

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1 files changed, 9 insertions, 0 deletions

diff --git a/include/linux/mlx5/mlx5_ifc_fpga.h b/include/linux/mlx5/mlx5_ifc_fpga.h
index 30d4b697fab6..0694077c9634 100644
--- a/include/linux/mlx5/mlx5_ifc_fpga.h
+++ b/include/linux/mlx5/mlx5_ifc_fpga.h
@@ -108,6 +108,15 @@ struct mlx5_ifc_fpga_cap_bits {
 	u8         reserved_at_500[0x300];
 };
 
+enum {
+	MLX5_FPGA_CTRL_OPERATION_LOAD                = 0x1,
+	MLX5_FPGA_CTRL_OPERATION_RESET               = 0x2,
+	MLX5_FPGA_CTRL_OPERATION_FLASH_SELECT        = 0x3,
+	MLX5_FPGA_CTRL_OPERATION_SANDBOX_BYPASS_ON   = 0x4,
+	MLX5_FPGA_CTRL_OPERATION_SANDBOX_BYPASS_OFF  = 0x5,
+	MLX5_FPGA_CTRL_OPERATION_RESET_SANDBOX       = 0x6,
+};
+
 struct mlx5_ifc_fpga_ctrl_bits {
 	u8         reserved_at_0[0x8];
 	u8         operation[0x8];