Merge branch 'for-mfd' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into for-next

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

3 files changed, 19 insertions, 0 deletions

diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e53dcfeaee69..76ca1bab0cea 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -306,6 +306,7 @@ int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
 int abx500_get_chip_id(struct device *dev);
 int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
 int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
+void abx500_dump_all_banks(void);
 
 struct abx500_ops {
 	int (*get_chip_id) (struct device *);
@@ -316,6 +317,7 @@ struct abx500_ops {
 	int (*mask_and_set_register) (struct device *, u8, u8, u8, u8);
 	int (*event_registers_startup_state_get) (struct device *, u8 *);
 	int (*startup_irq_enabled) (struct device *, unsigned int);
+	void (*dump_all_banks) (struct device *);
 };
 
 int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 10eb50973c39..ebf12e793db9 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -37,6 +37,11 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 	return ab8500_sysctrl_write(reg, bits, 0);
 }
 
+/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
+struct ab8500_sysctrl_platform_data {
+	u8 initial_req_buf_config[8];
+};
+
 /* Registers */
 #define AB8500_TURNONSTATUS		0x100
 #define AB8500_RESETSTATUS		0x101
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 1cb5698b4d76..fa7173dd71f2 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -270,10 +270,12 @@ struct regulator_reg_init;
 struct regulator_init_data;
 struct ab8500_gpio_platform_data;
 struct ab8500_codec_platform_data;
+struct ab8500_sysctrl_platform_data;
 
 /**
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @pm_power_off: Should machine pm power off hook be registered or not
  * @init: board-specific initialization after detection of ab8500
  * @num_regulator_reg_init: number of regulator init registers
  * @regulator_reg_init: regulator init registers
@@ -282,6 +284,7 @@ struct ab8500_codec_platform_data;
  */
 struct ab8500_platform_data {
 	int irq_base;
+	bool pm_power_off;
 	void (*init) (struct ab8500 *);
 	int num_regulator_reg_init;
 	struct ab8500_regulator_reg_init *regulator_reg_init;
@@ -289,6 +292,7 @@ struct ab8500_platform_data {
 	struct regulator_init_data *regulator;
 	struct ab8500_gpio_platform_data *gpio;
 	struct ab8500_codec_platform_data *codec;
+	struct ab8500_sysctrl_platform_data *sysctrl;
 };
 
 extern int ab8500_init(struct ab8500 *ab8500,
@@ -341,4 +345,12 @@ static inline int is_ab8500_2p0(struct ab8500 *ab)
 	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
 }
 
+#ifdef CONFIG_AB8500_DEBUG
+void ab8500_dump_all_banks(struct device *dev);
+void ab8500_debug_register_interrupt(int line);
+#else
+static inline void ab8500_dump_all_banks(struct device *dev) {}
+static inline void ab8500_debug_register_interrupt(int line) {}
+#endif
+
 #endif /* MFD_AB8500_H */