Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...

1 files changed, 1 insertions, 67 deletions

diff --git a/include/linux/fs.h b/include/linux/fs.h
index dc0478c07b2a..b84230e070be 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -28,7 +28,6 @@
 #include <linux/uidgid.h>
 #include <linux/lockdep.h>
 #include <linux/percpu-rwsem.h>
-#include <linux/blk_types.h>
 #include <linux/workqueue.h>
 #include <linux/percpu-rwsem.h>
 #include <linux/delayed_call.h>
@@ -38,6 +37,7 @@
 
 struct backing_dev_info;
 struct bdi_writeback;
+struct bio;
 struct export_operations;
 struct hd_geometry;
 struct iovec;
@@ -152,58 +152,6 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
 #define CHECK_IOVEC_ONLY -1
 
 /*
- * The below are the various read and write flags that we support. Some of
- * them include behavioral modifiers that send information down to the
- * block layer and IO scheduler. They should be used along with a req_op.
- * Terminology:
- *
- *	The block layer uses device plugging to defer IO a little bit, in
- *	the hope that we will see more IO very shortly. This increases
- *	coalescing of adjacent IO and thus reduces the number of IOs we
- *	have to send to the device. It also allows for better queuing,
- *	if the IO isn't mergeable. If the caller is going to be waiting
- *	for the IO, then he must ensure that the device is unplugged so
- *	that the IO is dispatched to the driver.
- *
- *	All IO is handled async in Linux. This is fine for background
- *	writes, but for reads or writes that someone waits for completion
- *	on, we want to notify the block layer and IO scheduler so that they
- *	know about it. That allows them to make better scheduling
- *	decisions. So when the below references 'sync' and 'async', it
- *	is referencing this priority hint.
- *
- * With that in mind, the available types are:
- *
- * READ			A normal read operation. Device will be plugged.
- * READ_SYNC		A synchronous read. Device is not plugged, caller can
- *			immediately wait on this read without caring about
- *			unplugging.
- * WRITE		A normal async write. Device will be plugged.
- * WRITE_SYNC		Synchronous write. Identical to WRITE, but passes down
- *			the hint that someone will be waiting on this IO
- *			shortly. The write equivalent of READ_SYNC.
- * WRITE_ODIRECT	Special case write for O_DIRECT only.
- * WRITE_FLUSH		Like WRITE_SYNC but with preceding cache flush.
- * WRITE_FUA		Like WRITE_SYNC but data is guaranteed to be on
- *			non-volatile media on completion.
- * WRITE_FLUSH_FUA	Combination of WRITE_FLUSH and FUA. The IO is preceded
- *			by a cache flush and data is guaranteed to be on
- *			non-volatile media on completion.
- *
- */
-#define RW_MASK			REQ_OP_WRITE
-
-#define READ			REQ_OP_READ
-#define WRITE			REQ_OP_WRITE
-
-#define READ_SYNC		REQ_SYNC
-#define WRITE_SYNC		(REQ_SYNC | REQ_NOIDLE)
-#define WRITE_ODIRECT		REQ_SYNC
-#define WRITE_FLUSH		(REQ_SYNC | REQ_NOIDLE | REQ_PREFLUSH)
-#define WRITE_FUA		(REQ_SYNC | REQ_NOIDLE | REQ_FUA)
-#define WRITE_FLUSH_FUA		(REQ_SYNC | REQ_NOIDLE | REQ_PREFLUSH | REQ_FUA)
-
-/*
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
  */
@@ -2499,19 +2447,6 @@ extern void make_bad_inode(struct inode *);
 extern bool is_bad_inode(struct inode *);
 
 #ifdef CONFIG_BLOCK
-static inline bool op_is_write(unsigned int op)
-{
-	return op == REQ_OP_READ ? false : true;
-}
-
-/*
- * return data direction, READ or WRITE
- */
-static inline int bio_data_dir(struct bio *bio)
-{
-	return op_is_write(bio_op(bio)) ? WRITE : READ;
-}
-
 extern void check_disk_size_change(struct gendisk *disk,
 				   struct block_device *bdev);
 extern int revalidate_disk(struct gendisk *);
@@ -2782,7 +2717,6 @@ static inline void remove_inode_hash(struct inode *inode)
 extern void inode_sb_list_add(struct inode *inode);
 
 #ifdef CONFIG_BLOCK
-extern blk_qc_t submit_bio(struct bio *);
 extern int bdev_read_only(struct block_device *);
 #endif
 extern int set_blocksize(struct block_device *, int);