Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

1 files changed, 87 insertions, 1 deletions

diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 8bbfe31fbac8..3c80885fa829 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -24,7 +24,7 @@
 #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
 #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
 #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
-#define   BCMA_CC_FLASHT_NFLASH		0x00000200
+#define   BCMA_CC_FLASHT_NFLASH		0x00000200	/* NAND flash */
 #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
 #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
 #define   BCMA_PLLTYPE_NONE		0x00000000
@@ -45,6 +45,7 @@
 #define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
 #define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
 #define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define  BCMA_CC_CAP_NFLASH		0x80000000	/* NAND flash present (rev >= 35 or BCM4706?) */
 #define BCMA_CC_CORECTL			0x0008
 #define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
 #define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
@@ -88,6 +89,11 @@
 #define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
+#define  BCMA_CC_CHIPST_4706_PKG_OPTION		BIT(0) /* 0: full-featured package 1: low-cost package */
+#define  BCMA_CC_CHIPST_4706_SFLASH_PRESENT	BIT(1) /* 0: parallel, 1: serial flash is present */
+#define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+#define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+#define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
 #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START		0x80000000
 #define  BCMA_CC_JCMD_BUSY		0x80000000
@@ -117,10 +123,58 @@
 #define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
 #define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
 #define BCMA_CC_FLASHCTL		0x0040
+/* Start/busy bit in flashcontrol */
+#define  BCMA_CC_FLASHCTL_OPCODE	0x000000ff
+#define  BCMA_CC_FLASHCTL_ACTION	0x00000700
+#define  BCMA_CC_FLASHCTL_CS_ACTIVE	0x00001000	/* Chip Select Active, rev >= 20 */
 #define  BCMA_CC_FLASHCTL_START		0x80000000
 #define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+/* Flashcontrol action + opcodes for ST flashes */
+#define  BCMA_CC_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
+#define  BCMA_CC_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
+#define  BCMA_CC_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
+#define  BCMA_CC_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
+#define  BCMA_CC_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
+#define  BCMA_CC_FLASHCTL_ST_PP		0x0302		/* Page Program */
+#define  BCMA_CC_FLASHCTL_ST_SE		0x02d8		/* Sector Erase */
+#define  BCMA_CC_FLASHCTL_ST_BE		0x00c7		/* Bulk Erase */
+#define  BCMA_CC_FLASHCTL_ST_DP		0x00b9		/* Deep Power-down */
+#define  BCMA_CC_FLASHCTL_ST_RES	0x03ab		/* Read Electronic Signature */
+#define  BCMA_CC_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
+#define  BCMA_CC_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
+/* Flashcontrol action + opcodes for Atmel flashes */
+#define  BCMA_CC_FLASHCTL_AT_READ			0x07e8
+#define  BCMA_CC_FLASHCTL_AT_PAGE_READ			0x07d2
+#define  BCMA_CC_FLASHCTL_AT_STATUS			0x01d7
+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE			0x0384
+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE			0x0387
+#define  BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM		0x0283
+#define  BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM		0x0286
+#define  BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM		0x0288
+#define  BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM		0x0289
+#define  BCMA_CC_FLASHCTL_AT_PAGE_ERASE			0x0281
+#define  BCMA_CC_FLASHCTL_AT_BLOCK_ERASE		0x0250
+#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
+#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
+#define  BCMA_CC_FLASHCTL_AT_BUF1_LOAD			0x0253
+#define  BCMA_CC_FLASHCTL_AT_BUF2_LOAD			0x0255
+#define  BCMA_CC_FLASHCTL_AT_BUF1_COMPARE		0x0260
+#define  BCMA_CC_FLASHCTL_AT_BUF2_COMPARE		0x0261
+#define  BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM		0x0258
+#define  BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM		0x0259
 #define BCMA_CC_FLASHADDR		0x0044
 #define BCMA_CC_FLASHDATA		0x0048
+/* Status register bits for ST flashes */
+#define  BCMA_CC_FLASHDATA_ST_WIP	0x01		/* Write In Progress */
+#define  BCMA_CC_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */
+#define  BCMA_CC_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */
+#define  BCMA_CC_FLASHDATA_ST_BP_SHIFT	2
+#define  BCMA_CC_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */
+/* Status register bits for Atmel flashes */
+#define  BCMA_CC_FLASHDATA_AT_READY	0x80
+#define  BCMA_CC_FLASHDATA_AT_MISMATCH	0x40
+#define  BCMA_CC_FLASHDATA_AT_ID_MASK	0x38
+#define  BCMA_CC_FLASHDATA_AT_ID_SHIFT	3
 #define BCMA_CC_BCAST_ADDR		0x0050
 #define BCMA_CC_BCAST_DATA		0x0054
 #define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
@@ -280,6 +334,15 @@
 
 /* 4706 PMU */
 #define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+#define BCMA_CC_PMU6_4706_PROCPLL_OFF	4	/* The CPU PLL */
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_MASK	0x000f0000
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT	16
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_MASK	0x0000f000
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT	12
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK	0x00000ff8
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT	3
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK	0x00000007
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT	0
 
 /* ALP clock on pre-PMU chips */
 #define BCMA_CC_PMU_ALP_CLOCK		20000000
@@ -308,6 +371,19 @@
 #define BCMA_CC_PPL_PCHI_OFF		5
 #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
 
+#define BCMA_CC_PMU_PLL_CTL0		0
+#define BCMA_CC_PMU_PLL_CTL1		1
+#define BCMA_CC_PMU_PLL_CTL2		2
+#define BCMA_CC_PMU_PLL_CTL3		3
+#define BCMA_CC_PMU_PLL_CTL4		4
+#define BCMA_CC_PMU_PLL_CTL5		5
+
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK	0x00f00000
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT	20
+
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK	0x1ff00000
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT	20
+
 /* BCM4331 ChipControl numbers. */
 #define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
 #define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
@@ -321,9 +397,18 @@
 #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
 #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
 #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_EXTPA_EN2		BIT(12)	/* 0 ext pa disable, 1 ext pa enabled */
 #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
 #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
 
+/* 43224 chip-specific ChipControl register bits */
+#define BCMA_CCTRL_43224_GPIO_TOGGLE		0x8000		/* gpio[3:0] pins as btcoex or s/w gpio */
+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE	0x00F000F0	/* 12 mA drive strength */
+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE	0xF0		/* 12 mA drive strength for later 43224s */
+
+/* 4313 Chip specific ChipControl register bits */
+#define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -411,5 +496,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
 					u32 offset, u32 mask, u32 set);
 extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
 				       u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
 
 #endif /* LINUX_BCMA_DRIVER_CC_H_ */