UBIFS: add new flash file system

This is a new flash file system. See
http://www.linux-mtd.infradead.org/doc/ubifs.html

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>

1 files changed, 745 insertions, 0 deletions

diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h
new file mode 100644
index 000000000000..0cc7da9bed47
--- /dev/null
+++ b/fs/ubifs/ubifs-media.h
@@ -0,0 +1,745 @@
+/*
+ * This file is part of UBIFS.
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors: Artem Bityutskiy (Битюцкий Артём)
+ *          Adrian Hunter
+ */
+
+/*
+ * This file describes UBIFS on-flash format and contains definitions of all the
+ * relevant data structures and constants.
+ *
+ * All UBIFS on-flash objects are stored in the form of nodes. All nodes start
+ * with the UBIFS node magic number and have the same common header. Nodes
+ * always sit at 8-byte aligned positions on the media and node header sizes are
+ * also 8-byte aligned (except for the indexing node and the padding node).
+ */
+
+#ifndef __UBIFS_MEDIA_H__
+#define __UBIFS_MEDIA_H__
+
+/* UBIFS node magic number (must not have the padding byte first or last) */
+#define UBIFS_NODE_MAGIC  0x06101831
+
+/* UBIFS on-flash format version */
+#define UBIFS_FORMAT_VERSION 4
+
+/* Minimum logical eraseblock size in bytes */
+#define UBIFS_MIN_LEB_SZ (15*1024)
+
+/* Initial CRC32 value used when calculating CRC checksums */
+#define UBIFS_CRC32_INIT 0xFFFFFFFFU
+
+/*
+ * UBIFS does not try to compress data if its length is less than the below
+ * constant.
+ */
+#define UBIFS_MIN_COMPR_LEN 128
+
+/* Root inode number */
+#define UBIFS_ROOT_INO 1
+
+/* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */
+#define UBIFS_FIRST_INO 64
+
+/*
+ * Maximum file name and extended attribute length (must be a multiple of 8,
+ * minus 1).
+ */
+#define UBIFS_MAX_NLEN 255
+
+/* Maximum number of data journal heads */
+#define UBIFS_MAX_JHEADS 1
+
+/*
+ * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system,
+ * which means that it does not treat the underlying media as consisting of
+ * blocks like in case of hard drives. Do not be confused. UBIFS block is just
+ * the maximum amount of data which one data node can have or which can be
+ * attached to an inode node.
+ */
+#define UBIFS_BLOCK_SIZE  4096
+#define UBIFS_BLOCK_SHIFT 12
+#define UBIFS_BLOCK_MASK  0x00000FFF
+
+/* UBIFS padding byte pattern (must not be first or last byte of node magic) */
+#define UBIFS_PADDING_BYTE 0xCE
+
+/* Maximum possible key length */
+#define UBIFS_MAX_KEY_LEN 16
+
+/* Key length ("simple" format) */
+#define UBIFS_SK_LEN 8
+
+/* Minimum index tree fanout */
+#define UBIFS_MIN_FANOUT 2
+
+/* Maximum number of levels in UBIFS indexing B-tree */
+#define UBIFS_MAX_LEVELS 512
+
+/* Maximum amount of data attached to an inode in bytes */
+#define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE
+
+/* LEB Properties Tree fanout (must be power of 2) and fanout shift */
+#define UBIFS_LPT_FANOUT 4
+#define UBIFS_LPT_FANOUT_SHIFT 2
+
+/* LEB Properties Tree bit field sizes */
+#define UBIFS_LPT_CRC_BITS 16
+#define UBIFS_LPT_CRC_BYTES 2
+#define UBIFS_LPT_TYPE_BITS 4
+
+/* The key is always at the same position in all keyed nodes */
+#define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key)
+
+/*
+ * LEB Properties Tree node types.
+ *
+ * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties)
+ * UBIFS_LPT_NNODE: LPT internal node
+ * UBIFS_LPT_LTAB: LPT's own lprops table
+ * UBIFS_LPT_LSAVE: LPT's save table (big model only)
+ * UBIFS_LPT_NODE_CNT: count of LPT node types
+ * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type
+ */
+enum {
+	UBIFS_LPT_PNODE,
+	UBIFS_LPT_NNODE,
+	UBIFS_LPT_LTAB,
+	UBIFS_LPT_LSAVE,
+	UBIFS_LPT_NODE_CNT,
+	UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1,
+};
+
+/*
+ * UBIFS inode types.
+ *
+ * UBIFS_ITYPE_REG: regular file
+ * UBIFS_ITYPE_DIR: directory
+ * UBIFS_ITYPE_LNK: soft link
+ * UBIFS_ITYPE_BLK: block device node
+ * UBIFS_ITYPE_CHR: character device node
+ * UBIFS_ITYPE_FIFO: fifo
+ * UBIFS_ITYPE_SOCK: socket
+ * UBIFS_ITYPES_CNT: count of supported file types
+ */
+enum {
+	UBIFS_ITYPE_REG,
+	UBIFS_ITYPE_DIR,
+	UBIFS_ITYPE_LNK,
+	UBIFS_ITYPE_BLK,
+	UBIFS_ITYPE_CHR,
+	UBIFS_ITYPE_FIFO,
+	UBIFS_ITYPE_SOCK,
+	UBIFS_ITYPES_CNT,
+};
+
+/*
+ * Supported key hash functions.
+ *
+ * UBIFS_KEY_HASH_R5: R5 hash
+ * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name
+ */
+enum {
+	UBIFS_KEY_HASH_R5,
+	UBIFS_KEY_HASH_TEST,
+};
+
+/*
+ * Supported key formats.
+ *
+ * UBIFS_SIMPLE_KEY_FMT: simple key format
+ */
+enum {
+	UBIFS_SIMPLE_KEY_FMT,
+};
+
+/*
+ * The simple key format uses 29 bits for storing UBIFS block number and hash
+ * value.
+ */
+#define UBIFS_S_KEY_BLOCK_BITS 29
+#define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF
+#define UBIFS_S_KEY_HASH_BITS  UBIFS_S_KEY_BLOCK_BITS
+#define UBIFS_S_KEY_HASH_MASK  UBIFS_S_KEY_BLOCK_MASK
+
+/*
+ * Key types.
+ *
+ * UBIFS_INO_KEY: inode node key
+ * UBIFS_DATA_KEY: data node key
+ * UBIFS_DENT_KEY: directory entry node key
+ * UBIFS_XENT_KEY: extended attribute entry key
+ * UBIFS_KEY_TYPES_CNT: number of supported key types
+ */
+enum {
+	UBIFS_INO_KEY,
+	UBIFS_DATA_KEY,
+	UBIFS_DENT_KEY,
+	UBIFS_XENT_KEY,
+	UBIFS_KEY_TYPES_CNT,
+};
+
+/* Count of LEBs reserved for the superblock area */
+#define UBIFS_SB_LEBS 1
+/* Count of LEBs reserved for the master area */
+#define UBIFS_MST_LEBS 2
+
+/* First LEB of the superblock area */
+#define UBIFS_SB_LNUM 0
+/* First LEB of the master area */
+#define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS)
+/* First LEB of the log area */
+#define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS)
+
+/*
+ * The below constants define the absolute minimum values for various UBIFS
+ * media areas. Many of them actually depend of flash geometry and the FS
+ * configuration (number of journal heads, orphan LEBs, etc). This means that
+ * the smallest volume size which can be used for UBIFS cannot be pre-defined
+ * by these constants. The file-system that meets the below limitation will not
+ * necessarily mount. UBIFS does run-time calculations and validates the FS
+ * size.
+ */
+
+/* Minimum number of logical eraseblocks in the log */
+#define UBIFS_MIN_LOG_LEBS 2
+/* Minimum number of bud logical eraseblocks (one for each head) */
+#define UBIFS_MIN_BUD_LEBS 3
+/* Minimum number of journal logical eraseblocks */
+#define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS)
+/* Minimum number of LPT area logical eraseblocks */
+#define UBIFS_MIN_LPT_LEBS 2
+/* Minimum number of orphan area logical eraseblocks */
+#define UBIFS_MIN_ORPH_LEBS 1
+/*
+ * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1
+ * for GC, 1 for deletions, and at least 1 for committed data).
+ */
+#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5)
+
+/* Minimum number of logical eraseblocks */
+#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
+			   UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \
+			   UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS)
+
+/* Node sizes (N.B. these are guaranteed to be multiples of 8) */
+#define UBIFS_CH_SZ        sizeof(struct ubifs_ch)
+#define UBIFS_INO_NODE_SZ  sizeof(struct ubifs_ino_node)
+#define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node)
+#define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node)
+#define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node)
+#define UBIFS_PAD_NODE_SZ  sizeof(struct ubifs_pad_node)
+#define UBIFS_SB_NODE_SZ   sizeof(struct ubifs_sb_node)
+#define UBIFS_MST_NODE_SZ  sizeof(struct ubifs_mst_node)
+#define UBIFS_REF_NODE_SZ  sizeof(struct ubifs_ref_node)
+#define UBIFS_IDX_NODE_SZ  sizeof(struct ubifs_idx_node)
+#define UBIFS_CS_NODE_SZ   sizeof(struct ubifs_cs_node)
+#define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node)
+/* Extended attribute entry nodes are identical to directory entry nodes */
+#define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ
+/* Only this does not have to be multiple of 8 bytes */
+#define UBIFS_BRANCH_SZ    sizeof(struct ubifs_branch)
+
+/* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */
+#define UBIFS_MAX_DATA_NODE_SZ  (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE)
+#define UBIFS_MAX_INO_NODE_SZ   (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA)
+#define UBIFS_MAX_DENT_NODE_SZ  (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1)
+#define UBIFS_MAX_XENT_NODE_SZ  UBIFS_MAX_DENT_NODE_SZ
+
+/* The largest UBIFS node */
+#define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ
+
+/*
+ * On-flash inode flags.
+ *
+ * UBIFS_COMPR_FL: use compression for this inode
+ * UBIFS_SYNC_FL:  I/O on this inode has to be synchronous
+ * UBIFS_IMMUTABLE_FL: inode is immutable
+ * UBIFS_APPEND_FL: writes to the inode may only append data
+ * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous
+ * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value
+ *
+ * Note, these are on-flash flags which correspond to ioctl flags
+ * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not
+ * have to be the same.
+ */
+enum {
+	UBIFS_COMPR_FL     = 0x01,
+	UBIFS_SYNC_FL      = 0x02,
+	UBIFS_IMMUTABLE_FL = 0x04,
+	UBIFS_APPEND_FL    = 0x08,
+	UBIFS_DIRSYNC_FL   = 0x10,
+	UBIFS_XATTR_FL     = 0x20,
+};
+
+/* Inode flag bits used by UBIFS */
+#define UBIFS_FL_MASK 0x0000001F
+
+/*
+ * UBIFS compression algorithms.
+ *
+ * UBIFS_COMPR_NONE: no compression
+ * UBIFS_COMPR_LZO: LZO compression
+ * UBIFS_COMPR_ZLIB: ZLIB compression
+ * UBIFS_COMPR_TYPES_CNT: count of supported compression types
+ */
+enum {
+	UBIFS_COMPR_NONE,
+	UBIFS_COMPR_LZO,
+	UBIFS_COMPR_ZLIB,
+	UBIFS_COMPR_TYPES_CNT,
+};
+
+/*
+ * UBIFS node types.
+ *
+ * UBIFS_INO_NODE: inode node
+ * UBIFS_DATA_NODE: data node
+ * UBIFS_DENT_NODE: directory entry node
+ * UBIFS_XENT_NODE: extended attribute node
+ * UBIFS_TRUN_NODE: truncation node
+ * UBIFS_PAD_NODE: padding node
+ * UBIFS_SB_NODE: superblock node
+ * UBIFS_MST_NODE: master node
+ * UBIFS_REF_NODE: LEB reference node
+ * UBIFS_IDX_NODE: index node
+ * UBIFS_CS_NODE: commit start node
+ * UBIFS_ORPH_NODE: orphan node
+ * UBIFS_NODE_TYPES_CNT: count of supported node types
+ *
+ * Note, we index arrays by these numbers, so keep them low and contiguous.
+ * Node type constants for inodes, direntries and so on have to be the same as
+ * corresponding key type constants.
+ */
+enum {
+	UBIFS_INO_NODE,
+	UBIFS_DATA_NODE,
+	UBIFS_DENT_NODE,
+	UBIFS_XENT_NODE,
+	UBIFS_TRUN_NODE,
+	UBIFS_PAD_NODE,
+	UBIFS_SB_NODE,
+	UBIFS_MST_NODE,
+	UBIFS_REF_NODE,
+	UBIFS_IDX_NODE,
+	UBIFS_CS_NODE,
+	UBIFS_ORPH_NODE,
+	UBIFS_NODE_TYPES_CNT,
+};
+
+/*
+ * Master node flags.
+ *
+ * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty
+ * UBIFS_MST_NO_ORPHS: no orphan inodes present
+ * UBIFS_MST_RCVRY: written by recovery
+ */
+enum {
+	UBIFS_MST_DIRTY = 1,
+	UBIFS_MST_NO_ORPHS = 2,
+	UBIFS_MST_RCVRY = 4,
+};
+
+/*
+ * Node group type (used by recovery to recover whole group or none).
+ *
+ * UBIFS_NO_NODE_GROUP: this node is not part of a group
+ * UBIFS_IN_NODE_GROUP: this node is a part of a group
+ * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group
+ */
+enum {
+	UBIFS_NO_NODE_GROUP = 0,
+	UBIFS_IN_NODE_GROUP,
+	UBIFS_LAST_OF_NODE_GROUP,
+};
+
+/*
+ * Superblock flags.
+ *
+ * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set
+ */
+enum {
+	UBIFS_FLG_BIGLPT = 0x02,
+};
+
+/**
+ * struct ubifs_ch - common header node.
+ * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC)
+ * @crc: CRC-32 checksum of the node header
+ * @sqnum: sequence number
+ * @len: full node length
+ * @node_type: node type
+ * @group_type: node group type
+ * @padding: reserved for future, zeroes
+ *
+ * Every UBIFS node starts with this common part. If the node has a key, the
+ * key always goes next.
+ */
+struct ubifs_ch {
+	__le32 magic;
+	__le32 crc;
+	__le64 sqnum;
+	__le32 len;
+	__u8 node_type;
+	__u8 group_type;
+	__u8 padding[2];
+} __attribute__ ((packed));
+
+/**
+ * union ubifs_dev_desc - device node descriptor.
+ * @new: new type device descriptor
+ * @huge: huge type device descriptor
+ *
+ * This data structure describes major/minor numbers of a device node. In an
+ * inode is a device node then its data contains an object of this type. UBIFS
+ * uses standard Linux "new" and "huge" device node encodings.
+ */
+union ubifs_dev_desc {
+	__le32 new;
+	__le64 huge;
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_ino_node - inode node.
+ * @ch: common header
+ * @key: node key
+ * @creat_sqnum: sequence number at time of creation
+ * @size: inode size in bytes (amount of uncompressed data)
+ * @atime_sec: access time seconds
+ * @ctime_sec: creation time seconds
+ * @mtime_sec: modification time seconds
+ * @atime_nsec: access time nanoseconds
+ * @ctime_nsec: creation time nanoseconds
+ * @mtime_nsec: modification time nanoseconds
+ * @nlink: number of hard links
+ * @uid: owner ID
+ * @gid: group ID
+ * @mode: access flags
+ * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc)
+ * @data_len: inode data length
+ * @xattr_cnt: count of extended attributes this inode has
+ * @xattr_size: summarized size of all extended attributes in bytes
+ * @padding1: reserved for future, zeroes
+ * @xattr_names: sum of lengths of all extended attribute names belonging to
+ *               this inode
+ * @compr_type: compression type used for this inode
+ * @padding2: reserved for future, zeroes
+ * @data: data attached to the inode
+ *
+ * Note, even though inode compression type is defined by @compr_type, some
+ * nodes of this inode may be compressed with different compressor - this
+ * happens if compression type is changed while the inode already has data
+ * nodes. But @compr_type will be use for further writes to the inode.
+ *
+ * Note, do not forget to amend 'zero_ino_node_unused()' function when changing
+ * the padding fields.
+ */
+struct ubifs_ino_node {
+	struct ubifs_ch ch;
+	__u8 key[UBIFS_MAX_KEY_LEN];
+	__le64 creat_sqnum;
+	__le64 size;
+	__le64 atime_sec;
+	__le64 ctime_sec;
+	__le64 mtime_sec;
+	__le32 atime_nsec;
+	__le32 ctime_nsec;
+	__le32 mtime_nsec;
+	__le32 nlink;
+	__le32 uid;
+	__le32 gid;
+	__le32 mode;
+	__le32 flags;
+	__le32 data_len;
+	__le32 xattr_cnt;
+	__le32 xattr_size;
+	__u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */
+	__le32 xattr_names;
+	__le16 compr_type;
+	__u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */
+	__u8 data[];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_dent_node - directory entry node.
+ * @ch: common header
+ * @key: node key
+ * @inum: target inode number
+ * @padding1: reserved for future, zeroes
+ * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc)
+ * @nlen: name length
+ * @padding2: reserved for future, zeroes
+ * @name: zero-terminated name
+ *
+ * Note, do not forget to amend 'zero_dent_node_unused()' function when
+ * changing the padding fields.
+ */
+struct ubifs_dent_node {
+	struct ubifs_ch ch;
+	__u8 key[UBIFS_MAX_KEY_LEN];
+	__le64 inum;
+	__u8 padding1;
+	__u8 type;
+	__le16 nlen;
+	__u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */
+	__u8 name[];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_data_node - data node.
+ * @ch: common header
+ * @key: node key
+ * @size: uncompressed data size in bytes
+ * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc)
+ * @padding: reserved for future, zeroes
+ * @data: data
+ *
+ * Note, do not forget to amend 'zero_data_node_unused()' function when
+ * changing the padding fields.
+ */
+struct ubifs_data_node {
+	struct ubifs_ch ch;
+	__u8 key[UBIFS_MAX_KEY_LEN];
+	__le32 size;
+	__le16 compr_type;
+	__u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */
+	__u8 data[];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_trun_node - truncation node.
+ * @ch: common header
+ * @inum: truncated inode number
+ * @padding: reserved for future, zeroes
+ * @old_size: size before truncation
+ * @new_size: size after truncation
+ *
+ * This node exists only in the journal and never goes to the main area. Note,
+ * do not forget to amend 'zero_trun_node_unused()' function when changing the
+ * padding fields.
+ */
+struct ubifs_trun_node {
+	struct ubifs_ch ch;
+	__le32 inum;
+	__u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */
+	__le64 old_size;
+	__le64 new_size;
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_pad_node - padding node.
+ * @ch: common header
+ * @pad_len: how many bytes after this node are unused (because padded)
+ * @padding: reserved for future, zeroes
+ */
+struct ubifs_pad_node {
+	struct ubifs_ch ch;
+	__le32 pad_len;
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_sb_node - superblock node.
+ * @ch: common header
+ * @padding: reserved for future, zeroes
+ * @key_hash: type of hash function used in keys
+ * @key_fmt: format of the key
+ * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc)
+ * @min_io_size: minimal input/output unit size
+ * @leb_size: logical eraseblock size in bytes
+ * @leb_cnt: count of LEBs used by file-system
+ * @max_leb_cnt: maximum count of LEBs used by file-system
+ * @max_bud_bytes: maximum amount of data stored in buds
+ * @log_lebs: log size in logical eraseblocks
+ * @lpt_lebs: number of LEBs used for lprops table
+ * @orph_lebs: number of LEBs used for recording orphans
+ * @jhead_cnt: count of journal heads
+ * @fanout: tree fanout (max. number of links per indexing node)
+ * @lsave_cnt: number of LEB numbers in LPT's save table
+ * @fmt_version: UBIFS on-flash format version
+ * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc)
+ * @padding1: reserved for future, zeroes
+ * @rp_uid: reserve pool UID
+ * @rp_gid: reserve pool GID
+ * @rp_size: size of the reserved pool in bytes
+ * @padding2: reserved for future, zeroes
+ * @time_gran: time granularity in nanoseconds
+ * @uuid: UUID generated when the file system image was created
+ */
+struct ubifs_sb_node {
+	struct ubifs_ch ch;
+	__u8 padding[2];
+	__u8 key_hash;
+	__u8 key_fmt;
+	__le32 flags;
+	__le32 min_io_size;
+	__le32 leb_size;
+	__le32 leb_cnt;
+	__le32 max_leb_cnt;
+	__le64 max_bud_bytes;
+	__le32 log_lebs;
+	__le32 lpt_lebs;
+	__le32 orph_lebs;
+	__le32 jhead_cnt;
+	__le32 fanout;
+	__le32 lsave_cnt;
+	__le32 fmt_version;
+	__le16 default_compr;
+	__u8 padding1[2];
+	__le32 rp_uid;
+	__le32 rp_gid;
+	__le64 rp_size;
+	__le32 time_gran;
+	__u8 uuid[16];
+	__u8 padding2[3972];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_mst_node - master node.
+ * @ch: common header
+ * @highest_inum: highest inode number in the committed index
+ * @cmt_no: commit number
+ * @flags: various flags (%UBIFS_MST_DIRTY, etc)
+ * @log_lnum: start of the log
+ * @root_lnum: LEB number of the root indexing node
+ * @root_offs: offset within @root_lnum
+ * @root_len: root indexing node length
+ * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was
+ * not reserved and should be reserved on mount)
+ * @ihead_lnum: LEB number of index head
+ * @ihead_offs: offset of index head
+ * @index_size: size of index on flash
+ * @total_free: total free space in bytes
+ * @total_dirty: total dirty space in bytes
+ * @total_used: total used space in bytes (includes only data LEBs)
+ * @total_dead: total dead space in bytes (includes only data LEBs)
+ * @total_dark: total dark space in bytes (includes only data LEBs)
+ * @lpt_lnum: LEB number of LPT root nnode
+ * @lpt_offs: offset of LPT root nnode
+ * @nhead_lnum: LEB number of LPT head
+ * @nhead_offs: offset of LPT head
+ * @ltab_lnum: LEB number of LPT's own lprops table
+ * @ltab_offs: offset of LPT's own lprops table
+ * @lsave_lnum: LEB number of LPT's save table (big model only)
+ * @lsave_offs: offset of LPT's save table (big model only)
+ * @lscan_lnum: LEB number of last LPT scan
+ * @empty_lebs: number of empty logical eraseblocks
+ * @idx_lebs: number of indexing logical eraseblocks
+ * @leb_cnt: count of LEBs used by file-system
+ * @padding: reserved for future, zeroes
+ */
+struct ubifs_mst_node {
+	struct ubifs_ch ch;
+	__le64 highest_inum;
+	__le64 cmt_no;
+	__le32 flags;
+	__le32 log_lnum;
+	__le32 root_lnum;
+	__le32 root_offs;
+	__le32 root_len;
+	__le32 gc_lnum;
+	__le32 ihead_lnum;
+	__le32 ihead_offs;
+	__le64 index_size;
+	__le64 total_free;
+	__le64 total_dirty;
+	__le64 total_used;
+	__le64 total_dead;
+	__le64 total_dark;
+	__le32 lpt_lnum;
+	__le32 lpt_offs;
+	__le32 nhead_lnum;
+	__le32 nhead_offs;
+	__le32 ltab_lnum;
+	__le32 ltab_offs;
+	__le32 lsave_lnum;
+	__le32 lsave_offs;
+	__le32 lscan_lnum;
+	__le32 empty_lebs;
+	__le32 idx_lebs;
+	__le32 leb_cnt;
+	__u8 padding[344];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_ref_node - logical eraseblock reference node.
+ * @ch: common header
+ * @lnum: the referred logical eraseblock number
+ * @offs: start offset in the referred LEB
+ * @jhead: journal head number
+ * @padding: reserved for future, zeroes
+ */
+struct ubifs_ref_node {
+	struct ubifs_ch ch;
+	__le32 lnum;
+	__le32 offs;
+	__le32 jhead;
+	__u8 padding[28];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_branch - key/reference/length branch
+ * @lnum: LEB number of the target node
+ * @offs: offset within @lnum
+ * @len: target node length
+ * @key: key
+ */
+struct ubifs_branch {
+	__le32 lnum;
+	__le32 offs;
+	__le32 len;
+	__u8 key[];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_idx_node - indexing node.
+ * @ch: common header
+ * @child_cnt: number of child index nodes
+ * @level: tree level
+ * @branches: LEB number / offset / length / key branches
+ */
+struct ubifs_idx_node {
+	struct ubifs_ch ch;
+	__le16 child_cnt;
+	__le16 level;
+	__u8 branches[];
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_cs_node - commit start node.
+ * @ch: common header
+ * @cmt_no: commit number
+ */
+struct ubifs_cs_node {
+	struct ubifs_ch ch;
+	__le64 cmt_no;
+} __attribute__ ((packed));
+
+/**
+ * struct ubifs_orph_node - orphan node.
+ * @ch: common header
+ * @cmt_no: commit number (also top bit is set on the last node of the commit)
+ * @inos: inode numbers of orphans
+ */
+struct ubifs_orph_node {
+	struct ubifs_ch ch;
+	__le64 cmt_no;
+	__le64 inos[];
+} __attribute__ ((packed));
+
+#endif /* __UBIFS_MEDIA_H__ */