summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-11-05 21:41:14 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2023-11-05 21:41:14 +0300
commit3d05e493e461c4469a9b73e00e59ea16e1d8a416 (patch)
treea23450428a4153bebce9bc11a92d1ea8803dca82 /drivers
parent2153fc3d68170bb67be8e389c2f6e0f4a9eb7cd3 (diff)
parent10e806d39d304f837ed2921f36499f17a774a220 (diff)
downloadlinux-3d05e493e461c4469a9b73e00e59ea16e1d8a416.tar.xz
Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has largely driver updates for 6.7, i.e. feature additions (like adding transfers while in atomic mode), using new helpers (like devm_clk_get_enabled), new IDs, documentation fixes and additions... you name it. The core got a memleak fix and better support for nested muxes" * tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits) i2c: s3c2410: make i2c_s3c_irq_nextbyte() void i2c: qcom-geni: add ACPI device id for sc8180x Documentation: i2c: add fault code for not supporting 10 bit addresses i2c: sun6i-p2wi: Prevent potential division by zero i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API i2c: i801: Use new helper acpi_use_parent_companion ACPI: Add helper acpi_use_parent_companion MAINTAINERS: add YAML file for i2c-demux-pinctrl i2c: core: fix lockdep warning for sparsely nested adapter chain i2c: axxia: eliminate kernel-doc warnings dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema i2c: stm32f7: Use devm_clk_get_enabled() i2c: stm32f4: Use devm_clk_get_enabled() i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev i2c: fix memleak in i2c_new_client_device() i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec i2c: i801: Simplify class-based client device instantiation i2c: exynos5: add support for atomic transfers i2c: at91-core: Use devm_clk_get_enabled() eeprom: at24: add ST M24C64-D Additional Write lockable page support ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-at91-core.c10
-rw-r--r--drivers/i2c/busses/i2c-axxia.c8
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c23
-rw-r--r--drivers/i2c/busses/i2c-cp2615.c2
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c80
-rw-r--r--drivers/i2c/busses/i2c-gpio.c7
-rw-r--r--drivers/i2c/busses/i2c-i801.c110
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c12
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c11
-rw-r--r--drivers/i2c/busses/i2c-omap.c8
-rw-r--r--drivers/i2c/busses/i2c-powermac.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c7
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c1
-rw-r--r--drivers/i2c/busses/i2c-rcar.c180
-rw-r--r--drivers/i2c/busses/i2c-riic.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c7
-rw-r--r--drivers/i2c/busses/i2c-stm32f4.c32
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c89
-rw-r--r--drivers/i2c/busses/i2c-sun6i-p2wi.c5
-rw-r--r--drivers/i2c/i2c-atr.c2
-rw-r--r--drivers/i2c/i2c-core-base.c19
-rw-r--r--drivers/i2c/i2c-dev.c18
-rw-r--r--drivers/i2c/muxes/i2c-demux-pinctrl.c12
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c7
-rw-r--r--drivers/misc/eeprom/at24.c42
26 files changed, 406 insertions, 291 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fd887f767675..28eb48dd5b32 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -158,6 +158,7 @@ config I2C_I801
Alder Lake (PCH)
Raptor Lake (PCH)
Meteor Lake (SOC and PCH)
+ Birch Stream (SOC)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index db45554327ae..dc52b3530725 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -221,11 +221,10 @@ static int at91_twi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- dev->clk = devm_clk_get(dev->dev, NULL);
+ dev->clk = devm_clk_get_enabled(dev->dev, NULL);
if (IS_ERR(dev->clk))
- return dev_err_probe(dev->dev, PTR_ERR(dev->clk), "no clock defined\n");
-
- clk_prepare_enable(dev->clk);
+ return dev_err_probe(dev->dev, PTR_ERR(dev->clk),
+ "failed to enable clock\n");
snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
i2c_set_adapdata(&dev->adapter, dev);
@@ -254,8 +253,6 @@ static int at91_twi_probe(struct platform_device *pdev)
rc = i2c_add_numbered_adapter(&dev->adapter);
if (rc) {
- clk_disable_unprepare(dev->clk);
-
pm_runtime_disable(dev->dev);
pm_runtime_set_suspended(dev->dev);
@@ -272,7 +269,6 @@ static void at91_twi_remove(struct platform_device *pdev)
struct at91_twi_dev *dev = platform_get_drvdata(pdev);
i2c_del_adapter(&dev->adapter);
- clk_disable_unprepare(dev->clk);
pm_runtime_disable(dev->dev);
pm_runtime_set_suspended(dev->dev);
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index d7f1e98777ac..a66f7f67b3b8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -131,6 +131,8 @@
* @i2c_clk: clock reference for i2c input clock
* @bus_clk_rate: current i2c bus clock rate
* @last: a flag indicating is this is last message in transfer
+ * @slave: associated &i2c_client
+ * @irq: platform device IRQ number
*/
struct axxia_i2c_dev {
void __iomem *base;
@@ -165,7 +167,7 @@ static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
writel(int_en | mask, idev->base + MST_INT_ENABLE);
}
-/**
+/*
* ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
*/
static u32 ns_to_clk(u64 ns, u32 clk_mhz)
@@ -263,7 +265,7 @@ static int i2c_m_recv_len(const struct i2c_msg *msg)
return (msg->flags & I2C_M_RECV_LEN) != 0;
}
-/**
+/*
* axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
* transfer length if this is the first byte of such a transfer.
*/
@@ -295,7 +297,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
return 0;
}
-/**
+/*
* axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
* @return: Number of bytes left to transfer.
*/
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index acee76732544..38f276c99193 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -160,6 +160,7 @@ struct brcmstb_i2c_dev {
struct completion done;
u32 clk_freq_hz;
int data_regsz;
+ bool atomic;
};
/* register accessors for both be and le cpu arch */
@@ -240,7 +241,7 @@ static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
int ret = 0;
unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);
- if (dev->irq >= 0) {
+ if (dev->irq >= 0 && !dev->atomic) {
if (!wait_for_completion_timeout(&dev->done, timeout))
ret = -ETIMEDOUT;
} else {
@@ -287,7 +288,7 @@ static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
return rc;
/* only if we are in interrupt mode */
- if (dev->irq >= 0)
+ if (dev->irq >= 0 && !dev->atomic)
reinit_completion(&dev->done);
/* enable BSC CTL interrupt line */
@@ -520,6 +521,23 @@ out:
}
+static int brcmstb_i2c_xfer_atomic(struct i2c_adapter *adapter,
+ struct i2c_msg msgs[], int num)
+{
+ struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
+ int ret;
+
+ if (dev->irq >= 0)
+ disable_irq(dev->irq);
+ dev->atomic = true;
+ ret = brcmstb_i2c_xfer(adapter, msgs, num);
+ dev->atomic = false;
+ if (dev->irq >= 0)
+ enable_irq(dev->irq);
+
+ return ret;
+}
+
static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
@@ -528,6 +546,7 @@ static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
static const struct i2c_algorithm brcmstb_i2c_algo = {
.master_xfer = brcmstb_i2c_xfer,
+ .master_xfer_atomic = brcmstb_i2c_xfer_atomic,
.functionality = brcmstb_i2c_functionality,
};
diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
index 3ded28632e4c..20f8f7c9a8cd 100644
--- a/drivers/i2c/busses/i2c-cp2615.c
+++ b/drivers/i2c/busses/i2c-cp2615.c
@@ -298,7 +298,7 @@ cp2615_i2c_probe(struct usb_interface *usbif, const struct usb_device_id *id)
if (!adap)
return -ENOMEM;
- strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1);
+ strscpy(adap->name, usbdev->serial, sizeof(adap->name));
adap->owner = THIS_MODULE;
adap->dev.parent = &usbif->dev;
adap->dev.of_node = usbif->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 2b0b9cdffa86..385ef9d9e4d4 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -194,6 +194,11 @@ struct exynos5_i2c {
*/
int trans_done;
+ /*
+ * Called from atomic context, don't use interrupts.
+ */
+ unsigned int atomic;
+
/* Controller operating frequency */
unsigned int op_clock;
@@ -265,7 +270,7 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
* exynos5_i2c_set_timing: updates the registers with appropriate
* timing values calculated
*
- * Timing values for operation are calculated against either 100kHz
+ * Timing values for operation are calculated against 100kHz, 400kHz
* or 1MHz controller operating frequency.
*
* Returns 0 on success, -EINVAL if the cycle length cannot
@@ -328,6 +333,23 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
*
* Constraints: 4 <= temp, 0 <= CLK_DIV < 256, 2 <= clk_cycle <= 510
*
+ * To split SCL clock into low, high periods appropriately, one
+ * proportion factor for each I2C mode is used, which is calculated
+ * using this formula.
+ * ```
+ * ((t_low_min + (scl_clock - t_low_min - t_high_min) / 2) / scl_clock)
+ * ```
+ * where:
+ * t_low_min is the minimal value of low period of the SCL clock in us;
+ * t_high_min is the minimal value of high period of the SCL clock in us;
+ * scl_clock is converted from SCL clock frequency into us.
+ *
+ * Below are the proportion factors for these I2C modes:
+ * t_low_min, t_high_min, scl_clock, proportion
+ * Standard Mode: 4.7us, 4.0us, 10us, 0.535
+ * Fast Mode: 1.3us, 0.6us, 2.5us, 0.64
+ * Fast-Plus Mode: 0.5us, 0.26us, 1us, 0.62
+ *
*/
t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
temp = clkin / op_clk - 8 - t_ftl_cycle;
@@ -341,8 +363,19 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
return -EINVAL;
}
- t_scl_l = clk_cycle / 2;
- t_scl_h = clk_cycle / 2;
+ /*
+ * Scale clk_cycle to get t_scl_l using the proption factors for individual I2C modes.
+ */
+ if (op_clk <= I2C_MAX_STANDARD_MODE_FREQ)
+ t_scl_l = clk_cycle * 535 / 1000;
+ else if (op_clk <= I2C_MAX_FAST_MODE_FREQ)
+ t_scl_l = clk_cycle * 64 / 100;
+ else
+ t_scl_l = clk_cycle * 62 / 100;
+
+ if (t_scl_l > 0xFF)
+ t_scl_l = 0xFF;
+ t_scl_h = clk_cycle - t_scl_l;
t_start_su = t_scl_l;
t_start_hd = t_scl_l;
t_stop_su = t_scl_l;
@@ -711,6 +744,22 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
spin_unlock_irqrestore(&i2c->lock, flags);
}
+static bool exynos5_i2c_poll_irqs_timeout(struct exynos5_i2c *i2c,
+ unsigned long timeout)
+{
+ unsigned long time_left = jiffies + timeout;
+
+ while (time_before(jiffies, time_left) &&
+ !((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
+ (i2c->state < 0))) {
+ while (readl(i2c->regs + HSI2C_INT_ENABLE) &
+ readl(i2c->regs + HSI2C_INT_STATUS))
+ exynos5_i2c_irq(i2c->irq, i2c);
+ usleep_range(100, 200);
+ }
+ return time_before(jiffies, time_left);
+}
+
static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
struct i2c_msg *msgs, int stop)
{
@@ -725,8 +774,13 @@ static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
exynos5_i2c_message_start(i2c, stop);
- timeout = wait_for_completion_timeout(&i2c->msg_complete,
- EXYNOS5_I2C_TIMEOUT);
+ if (!i2c->atomic)
+ timeout = wait_for_completion_timeout(&i2c->msg_complete,
+ EXYNOS5_I2C_TIMEOUT);
+ else
+ timeout = exynos5_i2c_poll_irqs_timeout(i2c,
+ EXYNOS5_I2C_TIMEOUT);
+
if (timeout == 0)
ret = -ETIMEDOUT;
else
@@ -777,6 +831,21 @@ err_pclk:
return ret ?: num;
}
+static int exynos5_i2c_xfer_atomic(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct exynos5_i2c *i2c = adap->algo_data;
+ int ret;
+
+ disable_irq(i2c->irq);
+ i2c->atomic = true;
+ ret = exynos5_i2c_xfer(adap, msgs, num);
+ i2c->atomic = false;
+ enable_irq(i2c->irq);
+
+ return ret;
+}
+
static u32 exynos5_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
@@ -784,6 +853,7 @@ static u32 exynos5_i2c_func(struct i2c_adapter *adap)
static const struct i2c_algorithm exynos5_i2c_algorithm = {
.master_xfer = exynos5_i2c_xfer,
+ .master_xfer_atomic = exynos5_i2c_xfer_atomic,
.functionality = exynos5_i2c_func,
};
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index e5a5b9e8bf2c..fb35a75fe0e3 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -263,15 +263,10 @@ static void i2c_gpio_fault_injector_init(struct platform_device *pdev)
* 'fault-injector' dir there. Until then, we have a global dir with
* all adapters as subdirs.
*/
- if (!i2c_gpio_debug_dir) {
+ if (!i2c_gpio_debug_dir)
i2c_gpio_debug_dir = debugfs_create_dir("i2c-fault-injector", NULL);
- if (!i2c_gpio_debug_dir)
- return;
- }
priv->debug_dir = debugfs_create_dir(pdev->name, i2c_gpio_debug_dir);
- if (!priv->debug_dir)
- return;
init_completion(&priv->scl_irq_completion);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1d855258a45d..070999139c6d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -79,6 +79,7 @@
* Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes
* Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes
* Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes
+ * Birch Stream (SOC) 0x5796 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -231,6 +232,7 @@
#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
+#define PCI_DEVICE_ID_INTEL_BIRCH_STREAM_SMBUS 0x5796
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
@@ -285,7 +287,6 @@ struct i801_priv {
u8 *data;
#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
- const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
struct gpiod_lookup_table *lookup;
#endif
@@ -293,10 +294,9 @@ struct i801_priv {
/*
* If set to true the host controller registers are reserved for
- * ACPI AML use. Protected by acpi_lock.
+ * ACPI AML use.
*/
bool acpi_reserved;
- struct mutex acpi_lock;
};
#define FEATURE_SMBUS_PEC BIT(0)
@@ -679,15 +679,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
return result ? priv->status : -ETIMEDOUT;
}
- for (i = 1; i <= len; i++) {
- if (i == len && read_write == I2C_SMBUS_READ)
- smbcmd |= SMBHSTCNT_LAST_BYTE;
- outb_p(smbcmd, SMBHSTCNT(priv));
-
- if (i == 1)
- outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
- SMBHSTCNT(priv));
+ if (len == 1 && read_write == I2C_SMBUS_READ)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ for (i = 1; i <= len; i++) {
status = i801_wait_byte_done(priv);
if (status)
return status;
@@ -710,9 +706,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
data->block[0] = len;
}
- /* Retrieve/store value in SMBBLKDAT */
- if (read_write == I2C_SMBUS_READ)
+ if (read_write == I2C_SMBUS_READ) {
data->block[i] = inb_p(SMBBLKDAT(priv));
+ if (i == len - 1)
+ outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+ }
+
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
outb_p(data->block[i+1], SMBBLKDAT(priv));
@@ -875,11 +874,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
int hwpec, ret;
struct i801_priv *priv = i2c_get_adapdata(adap);
- mutex_lock(&priv->acpi_lock);
- if (priv->acpi_reserved) {
- mutex_unlock(&priv->acpi_lock);
+ if (priv->acpi_reserved)
return -EBUSY;
- }
pm_runtime_get_sync(&priv->pci_dev->dev);
@@ -920,7 +916,6 @@ out:
pm_runtime_mark_last_busy(&priv->pci_dev->dev);
pm_runtime_put_autosuspend(&priv->pci_dev->dev);
- mutex_unlock(&priv->acpi_lock);
return ret;
}
@@ -1044,6 +1039,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ 0, }
};
@@ -1288,7 +1284,7 @@ static void i801_probe_optional_slaves(struct i801_priv *priv)
/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
- if (!priv->mux_drvdata)
+ if (!priv->mux_pdev)
#endif
i2c_register_spd(&priv->adapter);
}
@@ -1390,11 +1386,14 @@ static void i801_add_mux(struct i801_priv *priv)
const struct i801_mux_config *mux_config;
struct i2c_mux_gpio_platform_data gpio_data;
struct gpiod_lookup_table *lookup;
+ const struct dmi_system_id *id;
int i;
- if (!priv->mux_drvdata)
+ id = dmi_first_match(mux_dmi_table);
+ if (!id)
return;
- mux_config = priv->mux_drvdata;
+
+ mux_config = id->driver_data;
/* Prepare the platform data */
memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
@@ -1438,35 +1437,9 @@ static void i801_del_mux(struct i801_priv *priv)
platform_device_unregister(priv->mux_pdev);
gpiod_remove_lookup_table(priv->lookup);
}
-
-static unsigned int i801_get_adapter_class(struct i801_priv *priv)
-{
- const struct dmi_system_id *id;
- const struct i801_mux_config *mux_config;
- unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- int i;
-
- id = dmi_first_match(mux_dmi_table);
- if (id) {
- /* Remove branch classes from trunk */
- mux_config = id->driver_data;
- for (i = 0; i < mux_config->n_values; i++)
- class &= ~mux_config->classes[i];
-
- /* Remember for later */
- priv->mux_drvdata = mux_config;
- }
-
- return class;
-}
#else
static inline void i801_add_mux(struct i801_priv *priv) { }
static inline void i801_del_mux(struct i801_priv *priv) { }
-
-static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
-{
- return I2C_CLASS_HWMON | I2C_CLASS_SPD;
-}
#endif
static struct platform_device *
@@ -1572,7 +1545,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
* further access from the driver itself. This device is now owned
* by the system firmware.
*/
- mutex_lock(&priv->acpi_lock);
+ i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
priv->acpi_reserved = true;
@@ -1592,7 +1565,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
else
status = acpi_os_write_port(address, (u32)*value, bits);
- mutex_unlock(&priv->acpi_lock);
+ i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
return status;
}
@@ -1630,6 +1603,12 @@ static void i801_setup_hstcfg(struct i801_priv *priv)
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
}
+static void i801_restore_regs(struct i801_priv *priv)
+{
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int err, i;
@@ -1641,12 +1620,11 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
- priv->adapter.class = i801_get_adapter_class(priv);
+ priv->adapter.class = I2C_CLASS_HWMON;
priv->adapter.algo = &smbus_algorithm;
priv->adapter.dev.parent = &dev->dev;
- ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
+ acpi_use_parent_companion(&priv->adapter.dev);
priv->adapter.retries = 3;
- mutex_init(&priv->acpi_lock);
priv->pci_dev = dev;
priv->features = id->driver_data;
@@ -1756,6 +1734,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err) {
platform_device_unregister(priv->tco_pdev);
i801_acpi_remove(priv);
+ i801_restore_regs(priv);
return err;
}
@@ -1780,12 +1759,10 @@ static void i801_remove(struct pci_dev *dev)
{
struct i801_priv *priv = pci_get_drvdata(dev);
- outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
i801_disable_host_notify(priv);
i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
i801_acpi_remove(priv);
- pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
platform_device_unregister(priv->tco_pdev);
@@ -1793,6 +1770,8 @@ static void i801_remove(struct pci_dev *dev)
if (!priv->acpi_reserved)
pm_runtime_get_noresume(&dev->dev);
+ i801_restore_regs(priv);
+
/*
* do not call pci_disable_device(dev) since it can cause hard hangs on
* some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
@@ -1803,18 +1782,18 @@ static void i801_shutdown(struct pci_dev *dev)
{
struct i801_priv *priv = pci_get_drvdata(dev);
- /* Restore config registers to avoid hard hang on some systems */
- outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
i801_disable_host_notify(priv);
- pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ /* Restore config registers to avoid hard hang on some systems */
+ i801_restore_regs(priv);
}
static int i801_suspend(struct device *dev)
{
struct i801_priv *priv = dev_get_drvdata(dev);
- outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
- pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+ i2c_mark_adapter_suspended(&priv->adapter);
+ i801_restore_regs(priv);
+
return 0;
}
@@ -1824,6 +1803,7 @@ static int i801_resume(struct device *dev)
i801_setup_hstcfg(priv);
i801_enable_host_notify(&priv->adapter);
+ i2c_mark_adapter_resumed(&priv->adapter);
return 0;
}
@@ -1842,16 +1822,11 @@ static struct pci_driver i801_driver = {
},
};
-static int __init i2c_i801_init(void)
+static int __init i2c_i801_init(struct pci_driver *drv)
{
if (dmi_name_in_vendors("FUJITSU"))
input_apanel_init();
- return pci_register_driver(&i801_driver);
-}
-
-static void __exit i2c_i801_exit(void)
-{
- pci_unregister_driver(&i801_driver);
+ return pci_register_driver(drv);
}
MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
@@ -1859,5 +1834,4 @@ MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
-module_init(i2c_i801_init);
-module_exit(i2c_i801_exit);
+module_driver(i801_driver, i2c_i801_init, pci_unregister_driver);
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1..a8b5719c3372 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1442,15 +1442,19 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk))
return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk);
+ i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic");
+ if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+ dev_err(&pdev->dev, "cannot get pmic clock\n");
+ return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+ }
+
if (i2c->have_pmic) {
- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get(&pdev->dev, "pmic");
- if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+ if (!i2c->clocks[I2C_MT65XX_CLK_PMIC].clk) {
dev_err(&pdev->dev, "cannot get pmic clock\n");
- return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+ return -ENODEV;
}
speed_clk = I2C_MT65XX_CLK_PMIC;
} else {
- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = NULL;
speed_clk = I2C_MT65XX_CLK_MAIN;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index fd8403b07fa6..dc160cbc3155 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -19,11 +19,10 @@
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/reset.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/delay.h>
@@ -859,7 +858,7 @@ static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device *dev)
{
- const struct of_device_id *device;
+ const struct mv64xxx_i2c_regs *data;
struct device_node *np = dev->of_node;
u32 bus_freq, tclk;
int rc = 0;
@@ -897,11 +896,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
*/
drv_data->adapter.timeout = HZ;
- device = of_match_device(mv64xxx_i2c_of_match_table, dev);
- if (!device)
+ data = device_get_match_data(dev);
+ if (!data)
return -ENODEV;
- memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+ memcpy(&drv_data->reg_offsets, data, sizeof(drv_data->reg_offsets));
/*
* For controllers embedded in new SoCs activate the
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 58fd6fa3edf1..42165ef57946 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -25,11 +25,11 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/platform_data/i2c-omap.h>
#include <linux/pm_runtime.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/property.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
@@ -1358,7 +1358,6 @@ omap_i2c_probe(struct platform_device *pdev)
const struct omap_i2c_bus_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
- const struct of_device_id *match;
int irq;
int r;
u32 rev;
@@ -1376,11 +1375,10 @@ omap_i2c_probe(struct platform_device *pdev)
if (IS_ERR(omap->base))
return PTR_ERR(omap->base);
- match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
- if (match) {
+ if (pdev->dev.of_node) {
u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
- pdata = match->data;
+ pdata = device_get_match_data(&pdev->dev);
omap->flags = pdata->flags;
of_property_read_u32(node, "clock-frequency", &freq);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 4996a628fdae..8e57ebe595be 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -231,7 +231,7 @@ static void i2c_powermac_create_one(struct i2c_adapter *adap,
struct i2c_board_info info = {};
struct i2c_client *newdev;
- strncpy(info.type, type, sizeof(info.type));
+ strscpy(info.type, type, sizeof(info.type));
info.addr = addr;
newdev = i2c_new_client_device(adap, &info);
if (IS_ERR(newdev))
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 29be05af826b..1d7648242749 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -32,6 +32,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/platform_data/i2c-pxa.h>
+#include <linux/property.h>
#include <linux/slab.h>
/* I2C register field definitions */
@@ -1252,10 +1253,8 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
enum pxa_i2c_types *i2c_types)
{
struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *of_id =
- of_match_device(i2c_pxa_dt_ids, &pdev->dev);
- if (!of_id)
+ if (!pdev->dev.of_node)
return 1;
/* For device tree we always use the dynamic or alias-assigned ID */
@@ -1264,7 +1263,7 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
i2c->use_pio = of_property_read_bool(np, "mrvl,i2c-polling");
i2c->fast_mode = of_property_read_bool(np, "mrvl,i2c-fast-mode");
- *i2c_types = (enum pxa_i2c_types)(of_id->data);
+ *i2c_types = (enum pxa_i2c_types)device_get_match_data(&pdev->dev);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 229353e96e09..6d829ed2f868 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -722,6 +722,7 @@ static const struct i2c_algorithm geni_i2c_algo = {
#ifdef CONFIG_ACPI
static const struct acpi_device_id geni_i2c_acpi_match[] = {
{ "QCOM0220"},
+ { "QCOM0411" },
{ },
};
MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index a32a93f9a60d..829ac053bbb7 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -41,6 +41,10 @@
#define ICSAR 0x1C /* slave address */
#define ICMAR 0x20 /* master address */
#define ICRXTX 0x24 /* data port */
+#define ICCCR2 0x28 /* Clock control 2 */
+#define ICMPR 0x2C /* SCL mask control */
+#define ICHPR 0x30 /* SCL HIGH control */
+#define ICLPR 0x34 /* SCL LOW control */
#define ICFBSCR 0x38 /* first bit setup cycle (Gen3) */
#define ICDMAER 0x3c /* DMA enable (Gen3) */
@@ -84,11 +88,25 @@
#define RMDMAE BIT(1) /* DMA Master Received Enable */
#define TMDMAE BIT(0) /* DMA Master Transmitted Enable */
+/* ICCCR2 */
+#define CDFD BIT(2) /* CDF Disable */
+#define HLSE BIT(1) /* HIGH/LOW Separate Control Enable */
+#define SME BIT(0) /* SCL Mask Enable */
+
/* ICFBSCR */
#define TCYC17 0x0f /* 17*Tcyc delay 1st bit between SDA and SCL */
#define RCAR_MIN_DMA_LEN 8
+/* SCL low/high ratio 5:4 to meet all I2C timing specs (incl safety margin) */
+#define RCAR_SCLD_RATIO 5
+#define RCAR_SCHD_RATIO 4
+/*
+ * SMD should be smaller than SCLD/SCHD and is always around 20 in the docs.
+ * Thus, we simply use 20 which works for low and high speeds.
+ */
+#define RCAR_DEFAULT_SMD 20
+
#define RCAR_BUS_PHASE_START (MDBS | MIE | ESG)
#define RCAR_BUS_PHASE_DATA (MDBS | MIE)
#define RCAR_BUS_PHASE_STOP (MDBS | MIE | FSB)
@@ -128,6 +146,8 @@ struct rcar_i2c_priv {
int pos;
u32 icccr;
+ u16 schd;
+ u16 scld;
u8 recovery_icmcr; /* protected by adapter lock */
enum rcar_i2c_type devtype;
struct i2c_client *slave;
@@ -216,11 +236,16 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMCR, MDBS);
rcar_i2c_write(priv, ICMSR, 0);
/* start clock */
- rcar_i2c_write(priv, ICCCR, priv->icccr);
-
- if (priv->devtype == I2C_RCAR_GEN3)
+ if (priv->devtype < I2C_RCAR_GEN3) {
+ rcar_i2c_write(priv, ICCCR, priv->icccr);
+ } else {
+ rcar_i2c_write(priv, ICCCR2, CDFD | HLSE | SME);
+ rcar_i2c_write(priv, ICCCR, priv->icccr);
+ rcar_i2c_write(priv, ICMPR, RCAR_DEFAULT_SMD);
+ rcar_i2c_write(priv, ICHPR, priv->schd);
+ rcar_i2c_write(priv, ICLPR, priv->scld);
rcar_i2c_write(priv, ICFBSCR, TCYC17);
-
+ }
}
static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
@@ -241,7 +266,7 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
{
- u32 scgd, cdf, round, ick, sum, scl, cdf_width;
+ u32 cdf, round, ick, sum, scl, cdf_width;
unsigned long rate;
struct device *dev = rcar_i2c_priv_to_dev(priv);
struct i2c_timings t = {
@@ -254,27 +279,17 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
/* Fall back to previously used values if not supplied */
i2c_parse_fw_timings(dev, &t, false);
- switch (priv->devtype) {
- case I2C_RCAR_GEN1:
- cdf_width = 2;
- break;
- case I2C_RCAR_GEN2:
- case I2C_RCAR_GEN3:
- cdf_width = 3;
- break;
- default:
- dev_err(dev, "device type error\n");
- return -EIO;
- }
-
/*
* calculate SCL clock
* see
- * ICCCR
+ * ICCCR (and ICCCR2 for Gen3+)
*
* ick = clkp / (1 + CDF)
* SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
*
+ * for Gen3+:
+ * SCL = clkp / (8 + SMD * 2 + SCLD + SCHD +F[(ticf + tr + intd) * clkp])
+ *
* ick : I2C internal clock < 20 MHz
* ticf : I2C SCL falling time
* tr : I2C SCL rising time
@@ -284,52 +299,82 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
*/
rate = clk_get_rate(priv->clk);
cdf = rate / 20000000;
- if (cdf >= 1U << cdf_width) {
- dev_err(dev, "Input clock %lu too high\n", rate);
- return -EIO;
- }
- ick = rate / (cdf + 1);
+ cdf_width = (priv->devtype == I2C_RCAR_GEN1) ? 2 : 3;
+ if (cdf >= 1U << cdf_width)
+ goto err_no_val;
+
+ /* On Gen3+, we use cdf only for the filters, not as a SCL divider */
+ ick = rate / (priv->devtype < I2C_RCAR_GEN3 ? (cdf + 1) : 1);
/*
- * it is impossible to calculate large scale
- * number on u32. separate it
+ * It is impossible to calculate a large scale number on u32. Separate it.
*
* F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd)
* = F[sum * ick / 1000000000]
* = F[(ick / 1000000) * sum / 1000]
*/
sum = t.scl_fall_ns + t.scl_rise_ns + t.scl_int_delay_ns;
- round = (ick + 500000) / 1000000 * sum;
- round = (round + 500) / 1000;
+ round = DIV_ROUND_CLOSEST(ick, 1000000);
+ round = DIV_ROUND_CLOSEST(round * sum, 1000);
- /*
- * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick])
- *
- * Calculation result (= SCL) should be less than
- * bus_speed for hardware safety
- *
- * We could use something along the lines of
- * div = ick / (bus_speed + 1) + 1;
- * scgd = (div - 20 - round + 7) / 8;
- * scl = ick / (20 + (scgd * 8) + round);
- * (not fully verified) but that would get pretty involved
- */
- for (scgd = 0; scgd < 0x40; scgd++) {
- scl = ick / (20 + (scgd * 8) + round);
- if (scl <= t.bus_freq_hz)
- goto scgd_find;
- }
- dev_err(dev, "it is impossible to calculate best SCL\n");
- return -EIO;
+ if (priv->devtype < I2C_RCAR_GEN3) {
+ u32 scgd;
+ /*
+ * SCL = ick / (20 + 8 * SCGD + F[(ticf + tr + intd) * ick])
+ * 20 + 8 * SCGD + F[...] = ick / SCL
+ * SCGD = ((ick / SCL) - 20 - F[...]) / 8
+ * Result (= SCL) should be less than bus_speed for hardware safety
+ */
+ scgd = DIV_ROUND_UP(ick, t.bus_freq_hz ?: 1);
+ scgd = DIV_ROUND_UP(scgd - 20 - round, 8);
+ scl = ick / (20 + 8 * scgd + round);
+
+ if (scgd > 0x3f)
+ goto err_no_val;
-scgd_find:
- dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
- scl, t.bus_freq_hz, rate, round, cdf, scgd);
+ dev_dbg(dev, "clk %u/%u(%lu), round %u, CDF: %u, SCGD: %u\n",
+ scl, t.bus_freq_hz, rate, round, cdf, scgd);
- /* keep icccr value */
- priv->icccr = scgd << cdf_width | cdf;
+ priv->icccr = scgd << cdf_width | cdf;
+ } else {
+ u32 x, sum_ratio = RCAR_SCHD_RATIO + RCAR_SCLD_RATIO;
+ /*
+ * SCLD/SCHD ratio and SMD default value are explained above
+ * where they are defined. With these definitions, we can compute
+ * x as a base value for the SCLD/SCHD ratio:
+ *
+ * SCL = clkp / (8 + 2 * SMD + SCLD + SCHD + F[(ticf + tr + intd) * clkp])
+ * SCL = clkp / (8 + 2 * RCAR_DEFAULT_SMD + RCAR_SCLD_RATIO * x
+ * + RCAR_SCHD_RATIO * x + F[...])
+ *
+ * with: sum_ratio = RCAR_SCLD_RATIO + RCAR_SCHD_RATIO
+ * and: smd = RCAR_DEFAULT_SMD
+ *
+ * SCL = clkp / (8 + 2 * smd + sum_ratio * x + F[...])
+ * 8 + 2 * smd + sum_ratio * x + F[...] = clkp / SCL
+ * x = ((clkp / SCL) - 8 - 2 * smd - F[...]) / sum_ratio
+ */
+ x = DIV_ROUND_UP(rate, t.bus_freq_hz ?: 1);
+ x = DIV_ROUND_UP(x - 8 - 2 * RCAR_DEFAULT_SMD - round, sum_ratio);
+ scl = rate / (8 + 2 * RCAR_DEFAULT_SMD + sum_ratio * x + round);
+
+ /* Bail out if values don't fit into 16 bit or SMD became too large */
+ if (x * RCAR_SCLD_RATIO > 0xffff || RCAR_DEFAULT_SMD > x * RCAR_SCHD_RATIO)
+ goto err_no_val;
+
+ priv->icccr = cdf;
+ priv->schd = RCAR_SCHD_RATIO * x;
+ priv->scld = RCAR_SCLD_RATIO * x;
+
+ dev_dbg(dev, "clk %u/%u(%lu), round %u, CDF: %u SCHD %u SCLD %u\n",
+ scl, t.bus_freq_hz, rate, round, cdf, priv->schd, priv->scld);
+ }
return 0;
+
+err_no_val:
+ dev_err(dev, "it is impossible to calculate best SCL\n");
+ return -EINVAL;
}
/*
@@ -843,12 +888,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
/* Gen3 needs a reset before allowing RXDMA once */
if (priv->devtype == I2C_RCAR_GEN3) {
- priv->flags |= ID_P_NO_RXDMA;
- if (!IS_ERR(priv->rstc)) {
- ret = rcar_i2c_do_reset(priv);
- if (ret == 0)
- priv->flags &= ~ID_P_NO_RXDMA;
- }
+ priv->flags &= ~ID_P_NO_RXDMA;
+ ret = rcar_i2c_do_reset(priv);
+ if (ret)
+ goto out;
}
rcar_i2c_init(priv);
@@ -1099,15 +1142,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
irqhandler = rcar_i2c_gen2_irq;
}
- if (priv->devtype == I2C_RCAR_GEN3) {
- priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
- if (!IS_ERR(priv->rstc)) {
- ret = reset_control_status(priv->rstc);
- if (ret < 0)
- priv->rstc = ERR_PTR(-ENOTSUPP);
- }
- }
-
/* Stay always active when multi-master to keep arbitration working */
if (of_property_read_bool(dev->of_node, "multi-master"))
priv->flags |= ID_P_PM_BLOCKED;
@@ -1117,6 +1151,18 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (of_property_read_bool(dev->of_node, "smbus"))
priv->flags |= ID_P_HOST_NOTIFY;
+ if (priv->devtype == I2C_RCAR_GEN3) {
+ priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc)) {
+ ret = PTR_ERR(priv->rstc);
+ goto out_pm_put;
+ }
+
+ ret = reset_control_status(priv->rstc);
+ if (ret < 0)
+ goto out_pm_put;
+ }
+
ret = platform_get_irq(pdev, 0);
if (ret < 0)
goto out_pm_put;
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index f0ee8871d5ae..e43ff483c56e 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -313,7 +313,7 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
* frequency with only 62 clock ticks max (31 high, 31 low).
* Aim for a duty of 60% LOW, 40% HIGH.
*/
- total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz);
+ total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz ?: 1);
for (cks = 0; cks < 7; cks++) {
/*
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 127eb3805fac..c56886af724e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -133,7 +133,7 @@ static const struct platform_device_id s3c24xx_driver_ids[] = {
};
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
-static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
+static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_i2c_match[] = {
@@ -377,11 +377,10 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c)
/*
* process an interrupt and work out what to do
*/
-static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
{
unsigned long tmp;
unsigned char byte;
- int ret = 0;
switch (i2c->state) {
@@ -544,7 +543,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
out:
- return ret;
+ return;
}
/*
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index ecc54792a66f..859ac0cf7f6c 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -783,23 +783,17 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
- i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(i2c_dev->clk)) {
- dev_err(&pdev->dev, "Error: Missing controller clock\n");
+ dev_err(&pdev->dev, "Failed to enable clock\n");
return PTR_ERR(i2c_dev->clk);
}
- ret = clk_prepare_enable(i2c_dev->clk);
- if (ret) {
- dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
- return ret;
- }
rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
- if (IS_ERR(rst)) {
- ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
- "Error: Missing reset ctrl\n");
- goto clk_free;
- }
+ if (IS_ERR(rst))
+ return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+ "Error: Missing reset ctrl\n");
+
reset_control_assert(rst);
udelay(2);
reset_control_deassert(rst);
@@ -816,7 +810,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Failed to request irq event %i\n",
irq_event);
- goto clk_free;
+ return ret;
}
ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
@@ -824,12 +818,12 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Failed to request irq error %i\n",
irq_error);
- goto clk_free;
+ return ret;
}
ret = stm32f4_i2c_hw_config(i2c_dev);
if (ret)
- goto clk_free;
+ return ret;
adap = &i2c_dev->adap;
i2c_set_adapdata(adap, i2c_dev);
@@ -845,7 +839,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(adap);
if (ret)
- goto clk_free;
+ return ret;
platform_set_drvdata(pdev, i2c_dev);
@@ -854,10 +848,6 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
return 0;
-
-clk_free:
- clk_disable_unprepare(i2c_dev->clk);
- return ret;
}
static void stm32f4_i2c_remove(struct platform_device *pdev)
@@ -865,8 +855,6 @@ static void stm32f4_i2c_remove(struct platform_device *pdev)
struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adap);
-
- clk_unprepare(i2c_dev->clk);
}
static const struct of_device_id stm32f4_i2c_match[] = {
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 0d3c9a041b56..983509936727 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -325,6 +325,7 @@ struct stm32f7_i2c_alert {
* @dnf_dt: value of digital filter requested via dt
* @dnf: value of digital filter to apply
* @alert: SMBus alert specific data
+ * @atomic: boolean indicating that current transfer is atomic
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@@ -357,6 +358,7 @@ struct stm32f7_i2c_dev {
u32 dnf_dt;
u32 dnf;
struct stm32f7_i2c_alert *alert;
+ bool atomic;
};
/*
@@ -915,7 +917,8 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
/* Configure DMA or enable RX/TX interrupt */
i2c_dev->use_dma = false;
- if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN
+ && !i2c_dev->atomic) {
ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
msg->flags & I2C_M_RD,
f7_msg->count, f7_msg->buf,
@@ -939,6 +942,9 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
cr1 |= STM32F7_I2C_CR1_TXDMAEN;
}
+ if (i2c_dev->atomic)
+ cr1 &= ~STM32F7_I2C_ALL_IRQ_MASK; /* Disable all interrupts */
+
/* Configure Start/Repeated Start */
cr2 |= STM32F7_I2C_CR2_START;
@@ -1673,7 +1679,22 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
return IRQ_HANDLED;
}
-static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+static int stm32f7_i2c_wait_polling(struct stm32f7_i2c_dev *i2c_dev)
+{
+ ktime_t timeout = ktime_add_ms(ktime_get(), i2c_dev->adap.timeout);
+
+ while (ktime_compare(ktime_get(), timeout) < 0) {
+ udelay(5);
+ stm32f7_i2c_isr_event(0, i2c_dev);
+
+ if (completion_done(&i2c_dev->complete))
+ return 1;
+ }
+
+ return 0;
+}
+
+static int stm32f7_i2c_xfer_core(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
@@ -1697,8 +1718,12 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
stm32f7_i2c_xfer_msg(i2c_dev, msgs);
- time_left = wait_for_completion_timeout(&i2c_dev->complete,
- i2c_dev->adap.timeout);
+ if (!i2c_dev->atomic)
+ time_left = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ else
+ time_left = stm32f7_i2c_wait_polling(i2c_dev);
+
ret = f7_msg->result;
if (ret) {
if (i2c_dev->use_dma)
@@ -1730,6 +1755,24 @@ pm_free:
return (ret < 0) ? ret : num;
}
+static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+ i2c_dev->atomic = false;
+ return stm32f7_i2c_xfer_core(i2c_adap, msgs, num);
+}
+
+static int stm32f7_i2c_xfer_atomic(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+ i2c_dev->atomic = true;
+ return stm32f7_i2c_xfer_core(i2c_adap, msgs, num);
+}
+
static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
unsigned short flags, char read_write,
u8 command, int size,
@@ -2098,6 +2141,7 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
static const struct i2c_algorithm stm32f7_i2c_algo = {
.master_xfer = stm32f7_i2c_xfer,
+ .master_xfer_atomic = stm32f7_i2c_xfer_atomic,
.smbus_xfer = stm32f7_i2c_smbus_xfer,
.functionality = stm32f7_i2c_func,
.reg_slave = stm32f7_i2c_reg_slave,
@@ -2134,23 +2178,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
"wakeup-source");
- i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(i2c_dev->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
- "Failed to get controller clock\n");
-
- ret = clk_prepare_enable(i2c_dev->clk);
- if (ret) {
- dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
- return ret;
- }
+ "Failed to enable controller clock\n");
rst = devm_reset_control_get(&pdev->dev, NULL);
- if (IS_ERR(rst)) {
- ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
- "Error: Missing reset ctrl\n");
- goto clk_free;
- }
+ if (IS_ERR(rst))
+ return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+ "Error: Missing reset ctrl\n");
+
reset_control_assert(rst);
udelay(2);
reset_control_deassert(rst);
@@ -2165,7 +2202,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Failed to request irq event %i\n",
irq_event);
- goto clk_free;
+ return ret;
}
ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
@@ -2173,29 +2210,28 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Failed to request irq error %i\n",
irq_error);
- goto clk_free;
+ return ret;
}
setup = of_device_get_match_data(&pdev->dev);
if (!setup) {
dev_err(&pdev->dev, "Can't get device data\n");
- ret = -ENODEV;
- goto clk_free;
+ return -ENODEV;
}
i2c_dev->setup = *setup;
ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
if (ret)
- goto clk_free;
+ return ret;
/* Setup Fast mode plus if necessary */
if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
if (ret)
- goto clk_free;
+ return ret;
ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
if (ret)
- goto clk_free;
+ return ret;
}
adap = &i2c_dev->adap;
@@ -2306,9 +2342,6 @@ clr_wakeup_capable:
fmp_clear:
stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
-clk_free:
- clk_disable_unprepare(i2c_dev->clk);
-
return ret;
}
@@ -2342,8 +2375,6 @@ static void stm32f7_i2c_remove(struct platform_device *pdev)
}
stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
-
- clk_disable_unprepare(i2c_dev->clk);
}
static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index fa6020dced59..85e035e7a1d7 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -201,6 +201,11 @@ static int p2wi_probe(struct platform_device *pdev)
return -EINVAL;
}
+ if (clk_freq == 0) {
+ dev_err(dev, "clock-frequency is set to 0 in DT\n");
+ return -EINVAL;
+ }
+
if (of_get_child_count(np) > 1) {
dev_err(dev, "P2WI only supports one slave device\n");
return -EINVAL;
diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c
index 8ca1daadec93..f21475ae5921 100644
--- a/drivers/i2c/i2c-atr.c
+++ b/drivers/i2c/i2c-atr.c
@@ -94,7 +94,7 @@ struct i2c_atr {
struct notifier_block i2c_nb;
- struct i2c_adapter *adapter[];
+ struct i2c_adapter *adapter[] __counted_by(max_adapters);
};
static struct i2c_atr_alias_pair *
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 60746652fd52..eac90a3cf61a 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -931,8 +931,9 @@ int i2c_dev_irq_from_resources(const struct resource *resources,
struct i2c_client *
i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
{
- struct i2c_client *client;
- int status;
+ struct i2c_client *client;
+ bool need_put = false;
+ int status;
client = kzalloc(sizeof *client, GFP_KERNEL);
if (!client)
@@ -970,7 +971,6 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
client->dev.fwnode = info->fwnode;
device_enable_async_suspend(&client->dev);
- i2c_dev_set_name(adap, client, info);
if (info->swnode) {
status = device_add_software_node(&client->dev, info->swnode);
@@ -982,6 +982,7 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
}
}
+ i2c_dev_set_name(adap, client, info);
status = device_register(&client->dev);
if (status)
goto out_remove_swnode;
@@ -993,6 +994,7 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
out_remove_swnode:
device_remove_software_node(&client->dev);
+ need_put = true;
out_err_put_of_node:
of_node_put(info->of_node);
out_err:
@@ -1000,7 +1002,10 @@ out_err:
"Failed to register i2c client %s at 0x%02x (%d)\n",
client->name, client->addr, status);
out_err_silent:
- kfree(client);
+ if (need_put)
+ put_device(&client->dev);
+ else
+ kfree(client);
return ERR_PTR(status);
}
EXPORT_SYMBOL_GPL(i2c_new_client_device);
@@ -1189,9 +1194,11 @@ static void i2c_adapter_dev_release(struct device *dev)
unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
{
unsigned int depth = 0;
+ struct device *parent;
- while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
- depth++;
+ for (parent = adapter->dev.parent; parent; parent = parent->parent)
+ if (parent->type == &i2c_adapter_type)
+ depth++;
WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
"adapter depth exceeds lockdep subclass limit\n");
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index a01b59e3599b..a91201509bc1 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -636,7 +636,10 @@ static const struct file_operations i2cdev_fops = {
/* ------------------------------------------------------------------------- */
-static struct class *i2c_dev_class;
+static const struct class i2c_dev_class = {
+ .name = "i2c-dev",
+ .dev_groups = i2c_groups,
+};
static void i2cdev_dev_release(struct device *dev)
{
@@ -665,7 +668,7 @@ static int i2cdev_attach_adapter(struct device *dev)
device_initialize(&i2c_dev->dev);
i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
- i2c_dev->dev.class = i2c_dev_class;
+ i2c_dev->dev.class = &i2c_dev_class;
i2c_dev->dev.parent = &adap->dev;
i2c_dev->dev.release = i2cdev_dev_release;
@@ -751,12 +754,9 @@ static int __init i2c_dev_init(void)
if (res)
goto out;
- i2c_dev_class = class_create("i2c-dev");
- if (IS_ERR(i2c_dev_class)) {
- res = PTR_ERR(i2c_dev_class);
+ res = class_register(&i2c_dev_class);
+ if (res)
goto out_unreg_chrdev;
- }
- i2c_dev_class->dev_groups = i2c_groups;
/* Keep track of adapters which will be added or removed later */
res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
@@ -769,7 +769,7 @@ static int __init i2c_dev_init(void)
return 0;
out_unreg_class:
- class_destroy(i2c_dev_class);
+ class_unregister(&i2c_dev_class);
out_unreg_chrdev:
unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
out:
@@ -781,7 +781,7 @@ static void __exit i2c_dev_exit(void)
{
bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
i2c_for_each_dev(NULL, i2c_dev_detach_adapter);
- class_destroy(i2c_dev_class);
+ class_unregister(&i2c_dev_class);
unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
}
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 9f2e4aa28159..7e2686b606c0 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -32,7 +32,7 @@ struct i2c_demux_pinctrl_priv {
const char *bus_name;
struct i2c_adapter cur_adap;
struct i2c_algorithm algo;
- struct i2c_demux_pinctrl_chan chan[];
+ struct i2c_demux_pinctrl_chan chan[] __counted_by(num_chan);
};
static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -167,9 +167,9 @@ static ssize_t available_masters_show(struct device *dev,
int count = 0, i;
for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
- count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%pOF%c",
- i, priv->chan[i].parent_np,
- i == priv->num_chan - 1 ? '\n' : ' ');
+ count += sysfs_emit_at(buf, count, "%d:%pOF%c",
+ i, priv->chan[i].parent_np,
+ i == priv->num_chan - 1 ? '\n' : ' ');
return count;
}
@@ -226,6 +226,8 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
if (!priv || !props)
return -ENOMEM;
+ priv->num_chan = num_chan;
+
err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
if (err)
return err;
@@ -253,9 +255,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
}
- priv->num_chan = num_chan;
priv->dev = &pdev->dev;
-
platform_set_drvdata(pdev, priv);
pm_runtime_no_callbacks(&pdev->dev);
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 78987ead6be0..6b979a0a6ab8 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -22,7 +22,7 @@ struct gpiomux {
struct gpio_desc **gpios;
};
-static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned int val)
{
DECLARE_BITMAP(values, BITS_PER_TYPE(val));
@@ -58,7 +58,7 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
struct device_node *adapter_np;
struct i2c_adapter *adapter = NULL;
struct fwnode_handle *child;
- unsigned *values;
+ unsigned int *values;
int rc, i = 0;
if (is_of_node(fwnode)) {
@@ -101,7 +101,6 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
device_for_each_child_node(dev, child) {
if (is_of_node(child)) {
fwnode_property_read_u32(child, "reg", values + i);
-
} else if (is_acpi_node(child)) {
rc = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), values + i);
if (rc) {
@@ -126,7 +125,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
struct gpiomux *mux;
struct i2c_adapter *parent;
struct i2c_adapter *root;
- unsigned initial_state;
+ unsigned int initial_state;
int i, ngpios, ret;
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index dbbf7db4ff2f..f61a80597a22 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -92,7 +92,7 @@ struct at24_data {
* them for us.
*/
u8 bank_addr_shift;
- struct regmap *client_regmaps[];
+ struct regmap *client_regmaps[] __counted_by(num_addresses);
};
/*
@@ -191,9 +191,13 @@ AT24_CHIP_DATA(at24_data_24c16, 16384 / 8, 0);
AT24_CHIP_DATA(at24_data_24cs16, 16,
AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c32, 32768 / 8, AT24_FLAG_ADDR16);
+/* M24C32-D Additional Write lockable page (M24C32-D order codes) */
+AT24_CHIP_DATA(at24_data_24c32d_wlp, 32, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24cs32, 16,
AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c64, 65536 / 8, AT24_FLAG_ADDR16);
+/* M24C64-D Additional Write lockable page (M24C64-D order codes) */
+AT24_CHIP_DATA(at24_data_24c64d_wlp, 32, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24cs64, 16,
AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
@@ -222,8 +226,10 @@ static const struct i2c_device_id at24_ids[] = {
{ "24c16", (kernel_ulong_t)&at24_data_24c16 },
{ "24cs16", (kernel_ulong_t)&at24_data_24cs16 },
{ "24c32", (kernel_ulong_t)&at24_data_24c32 },
+ { "24c32d-wl", (kernel_ulong_t)&at24_data_24c32d_wlp },
{ "24cs32", (kernel_ulong_t)&at24_data_24cs32 },
{ "24c64", (kernel_ulong_t)&at24_data_24c64 },
+ { "24c64-wl", (kernel_ulong_t)&at24_data_24c64d_wlp },
{ "24cs64", (kernel_ulong_t)&at24_data_24cs64 },
{ "24c128", (kernel_ulong_t)&at24_data_24c128 },
{ "24c256", (kernel_ulong_t)&at24_data_24c256 },
@@ -252,8 +258,10 @@ static const struct of_device_id at24_of_match[] = {
{ .compatible = "atmel,24c16", .data = &at24_data_24c16 },
{ .compatible = "atmel,24cs16", .data = &at24_data_24cs16 },
{ .compatible = "atmel,24c32", .data = &at24_data_24c32 },
+ { .compatible = "atmel,24c32d-wl", .data = &at24_data_24c32d_wlp },
{ .compatible = "atmel,24cs32", .data = &at24_data_24cs32 },
{ .compatible = "atmel,24c64", .data = &at24_data_24c64 },
+ { .compatible = "atmel,24c64d-wl", .data = &at24_data_24c64d_wlp },
{ .compatible = "atmel,24cs64", .data = &at24_data_24cs64 },
{ .compatible = "atmel,24c128", .data = &at24_data_24c128 },
{ .compatible = "atmel,24c256", .data = &at24_data_24c256 },
@@ -509,32 +517,6 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
return 0;
}
-static const struct at24_chip_data *at24_get_chip_data(struct device *dev)
-{
- struct device_node *of_node = dev->of_node;
- const struct at24_chip_data *cdata;
- const struct i2c_device_id *id;
-
- id = i2c_match_id(at24_ids, to_i2c_client(dev));
-
- /*
- * The I2C core allows OF nodes compatibles to match against the
- * I2C device ID table as a fallback, so check not only if an OF
- * node is present but also if it matches an OF device ID entry.
- */
- if (of_node && of_match_device(at24_of_match, dev))
- cdata = of_device_get_match_data(dev);
- else if (id)
- cdata = (void *)id->driver_data;
- else
- cdata = acpi_device_get_match_data(dev);
-
- if (!cdata)
- return ERR_PTR(-ENODEV);
-
- return cdata;
-}
-
static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
struct i2c_client *base_client,
struct regmap_config *regmap_config)
@@ -601,9 +583,9 @@ static int at24_probe(struct i2c_client *client)
i2c_fn_block = i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK);
- cdata = at24_get_chip_data(dev);
- if (IS_ERR(cdata))
- return PTR_ERR(cdata);
+ cdata = i2c_get_match_data(client);
+ if (!cdata)
+ return -ENODEV;
err = device_property_read_u32(dev, "pagesize", &page_size);
if (err)