Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for Adafruit Seesaw gamepad device

 - Zforce touchscreen will handle standard device properties for axis
   swap/inversion

 - handling of advanced sensitivity settings in Microchip CAP11xx
   capacitive sensor driver

 - more drivers have been converted to use newer gpiod API

 - support for dedicated wakeup IRQs in gpio-keys dirver

 - support for slider gestures and OTP variants in iqs269a driver

 - atkbd will report keyboard version as 0xab83 in cases when GET ID
   command was skipped (to deal with problematic firmware on newer
   laptops), restoring the previous behavior

 - other assorted cleanups and changes

* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: atkbd - use ab83 as id when skipping the getid command
  Input: driver for Adafruit Seesaw Gamepad
  dt-bindings: input: bindings for Adafruit Seesaw Gamepad
  Input: da9063_onkey - avoid explicitly setting input's parent
  Input: da9063_onkey - avoid using OF-specific APIs
  Input: iqs269a - add support for OTP variants
  dt-bindings: input: iqs269a: Add bindings for OTP variants
  Input: iqs269a - add support for slider gestures
  dt-bindings: input: iqs269a: Add bindings for slider gestures
  Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
  Input: zforce_ts - accept standard touchscreen properties
  dt-bindings: touchscreen: neonode,zforce: Use standard properties
  dt-bindings: touchscreen: convert neonode,zforce to json-schema
  dt-bindings: input: convert drv266x to json-schema
  Input: da9063 - use dev_err_probe()
  Input: da9063 - drop redundant prints in probe()
  Input: da9063 - simplify obtaining OF match data
  Input: as5011 - convert to GPIO descriptor
  Input: omap-keypad - drop optional GPIO support
  Input: tca6416-keypad - drop unused include
  ...

37 files changed, 1101 insertions, 367 deletions

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 8c5fdb0f858a..f71ea4fb173f 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1365,8 +1365,8 @@ static ssize_t input_dev_show_##name(struct device *dev,		\
 {									\
 	struct input_dev *input_dev = to_input_dev(dev);		\
 									\
-	return scnprintf(buf, PAGE_SIZE, "%s\n",			\
-			 input_dev->name ? input_dev->name : "");	\
+	return sysfs_emit(buf, "%s\n",					\
+			  input_dev->name ? input_dev->name : "");	\
 }									\
 static DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL)
 
@@ -1458,7 +1458,7 @@ static ssize_t inhibited_show(struct device *dev,
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", input_dev->inhibited);
+	return sysfs_emit(buf, "%d\n", input_dev->inhibited);
 }
 
 static ssize_t inhibited_store(struct device *dev,
@@ -1505,7 +1505,7 @@ static ssize_t input_dev_show_id_##name(struct device *dev,		\
 					char *buf)			\
 {									\
 	struct input_dev *input_dev = to_input_dev(dev);		\
-	return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name);	\
+	return sysfs_emit(buf, "%04x\n", input_dev->id.name);		\
 }									\
 static DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL)
 
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index ac6925ce8366..7755e5b454d2 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -412,4 +412,14 @@ config JOYSTICK_SENSEHAT
 	  To compile this driver as a module, choose M here: the
 	  module will be called sensehat_joystick.
 
+config JOYSTICK_SEESAW
+	tristate "Adafruit Mini I2C Gamepad with Seesaw"
+	depends on I2C
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to use the Adafruit Mini I2C Gamepad.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adafruit-seesaw.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 3937535f0098..9976f596a920 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_JOYSTICK_N64)		+= n64joy.o
 obj-$(CONFIG_JOYSTICK_PSXPAD_SPI)	+= psxpad-spi.o
 obj-$(CONFIG_JOYSTICK_PXRC)		+= pxrc.o
 obj-$(CONFIG_JOYSTICK_QWIIC)		+= qwiic-joystick.o
+obj-$(CONFIG_JOYSTICK_SEESAW)		+= adafruit-seesaw.o
 obj-$(CONFIG_JOYSTICK_SENSEHAT)	+= sensehat-joystick.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
diff --git a/drivers/input/joystick/adafruit-seesaw.c b/drivers/input/joystick/adafruit-seesaw.c
new file mode 100644
index 000000000000..1b9279f024cc
--- /dev/null
+++ b/drivers/input/joystick/adafruit-seesaw.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Anshul Dalal <anshulusr@gmail.com>
+ *
+ * Driver for Adafruit Mini I2C Gamepad
+ *
+ * Based on the work of:
+ *	Oleh Kravchenko (Sparkfun Qwiic Joystick driver)
+ *
+ * Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+ * Product page: https://www.adafruit.com/product/5743
+ * Firmware and hardware sources: https://github.com/adafruit/Adafruit_Seesaw
+ *
+ * TODO:
+ *	- Add interrupt support
+ */
+
+#include <asm/unaligned.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define SEESAW_DEVICE_NAME		"seesaw-gamepad"
+
+#define SEESAW_ADC_BASE			0x0900
+
+#define SEESAW_GPIO_DIRCLR_BULK		0x0103
+#define SEESAW_GPIO_BULK		0x0104
+#define SEESAW_GPIO_BULK_SET		0x0105
+#define SEESAW_GPIO_PULLENSET		0x010b
+
+#define SEESAW_STATUS_HW_ID		0x0001
+#define SEESAW_STATUS_SWRST		0x007f
+
+#define SEESAW_ADC_OFFSET		0x07
+
+#define SEESAW_BUTTON_A			0x05
+#define SEESAW_BUTTON_B			0x01
+#define SEESAW_BUTTON_X			0x06
+#define SEESAW_BUTTON_Y			0x02
+#define SEESAW_BUTTON_START		0x10
+#define SEESAW_BUTTON_SELECT		0x00
+
+#define SEESAW_ANALOG_X			0x0e
+#define SEESAW_ANALOG_Y			0x0f
+
+#define SEESAW_JOYSTICK_MAX_AXIS	1023
+#define SEESAW_JOYSTICK_FUZZ		2
+#define SEESAW_JOYSTICK_FLAT		4
+
+#define SEESAW_GAMEPAD_POLL_INTERVAL_MS	16
+#define SEESAW_GAMEPAD_POLL_MIN		8
+#define SEESAW_GAMEPAD_POLL_MAX		32
+
+static const unsigned long SEESAW_BUTTON_MASK =
+	BIT(SEESAW_BUTTON_A) | BIT(SEESAW_BUTTON_B) | BIT(SEESAW_BUTTON_X) |
+	BIT(SEESAW_BUTTON_Y) | BIT(SEESAW_BUTTON_START) |
+	BIT(SEESAW_BUTTON_SELECT);
+
+struct seesaw_gamepad {
+	struct input_dev *input_dev;
+	struct i2c_client *i2c_client;
+};
+
+struct seesaw_data {
+	u16 x;
+	u16 y;
+	u32 button_state;
+};
+
+static const struct key_entry seesaw_buttons_new[] = {
+	{ KE_KEY, SEESAW_BUTTON_A, .keycode = BTN_SOUTH },
+	{ KE_KEY, SEESAW_BUTTON_B, .keycode = BTN_EAST },
+	{ KE_KEY, SEESAW_BUTTON_X, .keycode = BTN_NORTH },
+	{ KE_KEY, SEESAW_BUTTON_Y, .keycode = BTN_WEST },
+	{ KE_KEY, SEESAW_BUTTON_START, .keycode = BTN_START },
+	{ KE_KEY, SEESAW_BUTTON_SELECT, .keycode = BTN_SELECT },
+	{ KE_END, 0 }
+};
+
+static int seesaw_register_read(struct i2c_client *client, u16 reg, void *buf,
+				int count)
+{
+	__be16 register_buf = cpu_to_be16(reg);
+	struct i2c_msg message_buf[2] = {
+		{
+			.addr = client->addr,
+			.flags = client->flags,
+			.len = sizeof(register_buf),
+			.buf = (u8 *)&register_buf,
+		},
+		{
+			.addr = client->addr,
+			.flags = client->flags | I2C_M_RD,
+			.len = count,
+			.buf = (u8 *)buf,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(client->adapter, message_buf,
+			   ARRAY_SIZE(message_buf));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int seesaw_register_write_u8(struct i2c_client *client, u16 reg,
+				    u8 value)
+{
+	u8 write_buf[sizeof(reg) + sizeof(value)];
+	int ret;
+
+	put_unaligned_be16(reg, write_buf);
+	write_buf[sizeof(reg)] = value;
+
+	ret = i2c_master_send(client, write_buf, sizeof(write_buf));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int seesaw_register_write_u32(struct i2c_client *client, u16 reg,
+				     u32 value)
+{
+	u8 write_buf[sizeof(reg) + sizeof(value)];
+	int ret;
+
+	put_unaligned_be16(reg, write_buf);
+	put_unaligned_be32(value, write_buf + sizeof(reg));
+	ret = i2c_master_send(client, write_buf, sizeof(write_buf));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)
+{
+	__be16 adc_data;
+	__be32 read_buf;
+	int err;
+
+	err = seesaw_register_read(client, SEESAW_GPIO_BULK,
+				   &read_buf, sizeof(read_buf));
+	if (err)
+		return err;
+
+	data->button_state = ~be32_to_cpu(read_buf);
+
+	err = seesaw_register_read(client,
+				   SEESAW_ADC_BASE |
+					(SEESAW_ADC_OFFSET + SEESAW_ANALOG_X),
+				   &adc_data, sizeof(adc_data));
+	if (err)
+		return err;
+	/*
+	 * ADC reads left as max and right as 0, must be reversed since kernel
+	 * expects reports in opposite order.
+	 */
+	data->x = SEESAW_JOYSTICK_MAX_AXIS - be16_to_cpu(adc_data);
+
+	err = seesaw_register_read(client,
+				   SEESAW_ADC_BASE |
+					(SEESAW_ADC_OFFSET + SEESAW_ANALOG_Y),
+				   &adc_data, sizeof(adc_data));
+	if (err)
+		return err;
+
+	data->y = be16_to_cpu(adc_data);
+
+	return 0;
+}
+
+static void seesaw_poll(struct input_dev *input)
+{
+	struct seesaw_gamepad *private = input_get_drvdata(input);
+	struct seesaw_data data;
+	int err, i;
+
+	err = seesaw_read_data(private->i2c_client, &data);
+	if (err) {
+		dev_err_ratelimited(&input->dev,
+				    "failed to read joystick state: %d\n", err);
+		return;
+	}
+
+	input_report_abs(input, ABS_X, data.x);
+	input_report_abs(input, ABS_Y, data.y);
+
+	for_each_set_bit(i, &SEESAW_BUTTON_MASK,
+			 BITS_PER_TYPE(SEESAW_BUTTON_MASK)) {
+		if (!sparse_keymap_report_event(input, i,
+						data.button_state & BIT(i),
+						false))
+			dev_err_ratelimited(&input->dev,
+					    "failed to report keymap event");
+	}
+
+	input_sync(input);
+}
+
+static int seesaw_probe(struct i2c_client *client)
+{
+	struct seesaw_gamepad *seesaw;
+	u8 hardware_id;
+	int err;
+
+	err = seesaw_register_write_u8(client, SEESAW_STATUS_SWRST, 0xFF);
+	if (err)
+		return err;
+
+	/* Wait for the registers to reset before proceeding */
+	usleep_range(10000, 15000);
+
+	seesaw = devm_kzalloc(&client->dev, sizeof(*seesaw), GFP_KERNEL);
+	if (!seesaw)
+		return -ENOMEM;
+
+	err = seesaw_register_read(client, SEESAW_STATUS_HW_ID,
+				   &hardware_id, sizeof(hardware_id));
+	if (err)
+		return err;
+
+	dev_dbg(&client->dev, "Adafruit Seesaw Gamepad, Hardware ID: %02x\n",
+		hardware_id);
+
+	/* Set Pin Mode to input and enable pull-up resistors */
+	err = seesaw_register_write_u32(client, SEESAW_GPIO_DIRCLR_BULK,
+					SEESAW_BUTTON_MASK);
+	if (err)
+		return err;
+	err = seesaw_register_write_u32(client, SEESAW_GPIO_PULLENSET,
+					SEESAW_BUTTON_MASK);
+	if (err)
+		return err;
+	err = seesaw_register_write_u32(client, SEESAW_GPIO_BULK_SET,
+					SEESAW_BUTTON_MASK);
+	if (err)
+		return err;
+
+	seesaw->i2c_client = client;
+	seesaw->input_dev = devm_input_allocate_device(&client->dev);
+	if (!seesaw->input_dev)
+		return -ENOMEM;
+
+	seesaw->input_dev->id.bustype = BUS_I2C;
+	seesaw->input_dev->name = "Adafruit Seesaw Gamepad";
+	seesaw->input_dev->phys = "i2c/" SEESAW_DEVICE_NAME;
+	input_set_drvdata(seesaw->input_dev, seesaw);
+	input_set_abs_params(seesaw->input_dev, ABS_X,
+			     0, SEESAW_JOYSTICK_MAX_AXIS,
+			     SEESAW_JOYSTICK_FUZZ, SEESAW_JOYSTICK_FLAT);
+	input_set_abs_params(seesaw->input_dev, ABS_Y,
+			     0, SEESAW_JOYSTICK_MAX_AXIS,
+			     SEESAW_JOYSTICK_FUZZ, SEESAW_JOYSTICK_FLAT);
+
+	err = sparse_keymap_setup(seesaw->input_dev, seesaw_buttons_new, NULL);
+	if (err) {
+		dev_err(&client->dev,
+			"failed to set up input device keymap: %d\n", err);
+		return err;
+	}
+
+	err = input_setup_polling(seesaw->input_dev, seesaw_poll);
+	if (err) {
+		dev_err(&client->dev, "failed to set up polling: %d\n", err);
+		return err;
+	}
+
+	input_set_poll_interval(seesaw->input_dev,
+				SEESAW_GAMEPAD_POLL_INTERVAL_MS);
+	input_set_max_poll_interval(seesaw->input_dev, SEESAW_GAMEPAD_POLL_MAX);
+	input_set_min_poll_interval(seesaw->input_dev, SEESAW_GAMEPAD_POLL_MIN);
+
+	err = input_register_device(seesaw->input_dev);
+	if (err) {
+		dev_err(&client->dev, "failed to register joystick: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id seesaw_id_table[] = {
+	{ SEESAW_DEVICE_NAME },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, seesaw_id_table);
+
+static const struct of_device_id seesaw_of_table[] = {
+	{ .compatible = "adafruit,seesaw-gamepad"},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, seesaw_of_table);
+
+static struct i2c_driver seesaw_driver = {
+	.driver = {
+		.name = SEESAW_DEVICE_NAME,
+		.of_match_table = seesaw_of_table,
+	},
+	.id_table = seesaw_id_table,
+	.probe = seesaw_probe,
+};
+module_i2c_driver(seesaw_driver);
+
+MODULE_AUTHOR("Anshul Dalal <anshulusr@gmail.com>");
+MODULE_DESCRIPTION("Adafruit Mini I2C Gamepad driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
index bf8b1cc0ea9c..f1822c19a289 100644
--- a/drivers/input/joystick/as5011.c
+++ b/drivers/input/joystick/as5011.c
@@ -13,7 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/input/as5011.h>
 #include <linux/slab.h>
@@ -61,7 +61,7 @@ MODULE_LICENSE("GPL");
 struct as5011_device {
 	struct input_dev *input_dev;
 	struct i2c_client *i2c_client;
-	unsigned int button_gpio;
+	struct gpio_desc *button_gpiod;
 	unsigned int button_irq;
 	unsigned int axis_irq;
 };
@@ -114,7 +114,7 @@ static int as5011_i2c_read(struct i2c_client *client,
 static irqreturn_t as5011_button_interrupt(int irq, void *dev_id)
 {
 	struct as5011_device *as5011 = dev_id;
-	int val = gpio_get_value_cansleep(as5011->button_gpio);
+	int val = gpiod_get_value_cansleep(as5011->button_gpiod);
 
 	input_report_key(as5011->input_dev, BTN_JOYSTICK, !val);
 	input_sync(as5011->input_dev);
@@ -248,7 +248,6 @@ static int as5011_probe(struct i2c_client *client)
 
 	as5011->i2c_client = client;
 	as5011->input_dev = input_dev;
-	as5011->button_gpio = plat_data->button_gpio;
 	as5011->axis_irq = plat_data->axis_irq;
 
 	input_dev->name = "Austria Microsystem as5011 joystick";
@@ -262,18 +261,20 @@ static int as5011_probe(struct i2c_client *client)
 	input_set_abs_params(as5011->input_dev, ABS_Y,
 		AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);
 
-	error = gpio_request(as5011->button_gpio, "AS5011 button");
-	if (error < 0) {
-		dev_err(&client->dev, "Failed to request button gpio\n");
+	as5011->button_gpiod = devm_gpiod_get(&client->dev, NULL, GPIOD_IN);
+	if (IS_ERR(as5011->button_gpiod)) {
+		error = PTR_ERR(as5011->button_gpiod);
+		dev_err(&client->dev, "Failed to request button GPIO\n");
 		goto err_free_mem;
 	}
+	gpiod_set_consumer_name(as5011->button_gpiod, "AS5011 button");
 
-	irq = gpio_to_irq(as5011->button_gpio);
+	irq = gpiod_to_irq(as5011->button_gpiod);
 	if (irq < 0) {
 		dev_err(&client->dev,
 			"Failed to get irq number for button gpio\n");
 		error = irq;
-		goto err_free_button_gpio;
+		goto err_free_mem;
 	}
 
 	as5011->button_irq = irq;
@@ -286,7 +287,7 @@ static int as5011_probe(struct i2c_client *client)
 	if (error < 0) {
 		dev_err(&client->dev,
 			"Can't allocate button irq %d\n", as5011->button_irq);
-		goto err_free_button_gpio;
+		goto err_free_mem;
 	}
 
 	error = as5011_configure_chip(as5011, plat_data);
@@ -317,8 +318,6 @@ err_free_axis_irq:
 	free_irq(as5011->axis_irq, as5011);
 err_free_button_irq:
 	free_irq(as5011->button_irq, as5011);
-err_free_button_gpio:
-	gpio_free(as5011->button_gpio);
 err_free_mem:
 	input_free_device(input_dev);
 	kfree(as5011);
@@ -332,7 +331,6 @@ static void as5011_remove(struct i2c_client *client)
 
 	free_irq(as5011->axis_irq, as5011);
 	free_irq(as5011->button_irq, as5011);
-	gpio_free(as5011->button_gpio);
 
 	input_unregister_device(as5011->input_dev);
 	kfree(as5011);
diff --git a/drivers/input/joystick/pxrc.c b/drivers/input/joystick/pxrc.c
index ea2bf5951d67..52d9eab667b7 100644
--- a/drivers/input/joystick/pxrc.c
+++ b/drivers/input/joystick/pxrc.c
@@ -5,15 +5,17 @@
  * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
  */
 
-#include <linux/kernel.h>
+#include <linux/cleanup.h>
 #include <linux/errno.h>
-#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
+
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <linux/mutex.h>
-#include <linux/input.h>
 
 #define PXRC_VENDOR_ID		0x1781
 #define PXRC_PRODUCT_ID		0x0898
@@ -81,33 +83,28 @@ exit:
 static int pxrc_open(struct input_dev *input)
 {
 	struct pxrc *pxrc = input_get_drvdata(input);
-	int retval;
+	int error;
 
-	mutex_lock(&pxrc->pm_mutex);
-	retval = usb_submit_urb(pxrc->urb, GFP_KERNEL);
-	if (retval) {
+	guard(mutex)(&pxrc->pm_mutex);
+	error = usb_submit_urb(pxrc->urb, GFP_KERNEL);
+	if (error) {
 		dev_err(&pxrc->intf->dev,
 			"%s - usb_submit_urb failed, error: %d\n",
-			__func__, retval);
-		retval = -EIO;
-		goto out;
+			__func__, error);
+		return -EIO;
 	}
 
 	pxrc->is_open = true;
-
-out:
-	mutex_unlock(&pxrc->pm_mutex);
-	return retval;
+	return 0;
 }
 
 static void pxrc_close(struct input_dev *input)
 {
 	struct pxrc *pxrc = input_get_drvdata(input);
 
-	mutex_lock(&pxrc->pm_mutex);
+	guard(mutex)(&pxrc->pm_mutex);
 	usb_kill_urb(pxrc->urb);
 	pxrc->is_open = false;
-	mutex_unlock(&pxrc->pm_mutex);
 }
 
 static void pxrc_free_urb(void *_pxrc)
@@ -208,10 +205,9 @@ static int pxrc_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct pxrc *pxrc = usb_get_intfdata(intf);
 
-	mutex_lock(&pxrc->pm_mutex);
+	guard(mutex)(&pxrc->pm_mutex);
 	if (pxrc->is_open)
 		usb_kill_urb(pxrc->urb);
-	mutex_unlock(&pxrc->pm_mutex);
 
 	return 0;
 }
@@ -219,14 +215,12 @@ static int pxrc_suspend(struct usb_interface *intf, pm_message_t message)
 static int pxrc_resume(struct usb_interface *intf)
 {
 	struct pxrc *pxrc = usb_get_intfdata(intf);
-	int retval = 0;
 
-	mutex_lock(&pxrc->pm_mutex);
+	guard(mutex)(&pxrc->pm_mutex);
 	if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0)
-		retval = -EIO;
+		return -EIO;
 
-	mutex_unlock(&pxrc->pm_mutex);
-	return retval;
+	return 0;
 }
 
 static int pxrc_pre_reset(struct usb_interface *intf)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e2c1848182de..b1244d7df6cc 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -1670,7 +1670,7 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	if (!led)
 		return -ENOMEM;
 
-	xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
+	xpad->pad_nr = ida_alloc(&xpad_pad_seq, GFP_KERNEL);
 	if (xpad->pad_nr < 0) {
 		error = xpad->pad_nr;
 		goto err_free_mem;
@@ -1693,7 +1693,7 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	return 0;
 
 err_free_id:
-	ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+	ida_free(&xpad_pad_seq, xpad->pad_nr);
 err_free_mem:
 	kfree(led);
 	xpad->led = NULL;
@@ -1706,7 +1706,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 
 	if (xpad_led) {
 		led_classdev_unregister(&xpad_led->led_cdev);
-		ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+		ida_free(&xpad_pad_seq, xpad->pad_nr);
 		kfree(xpad_led);
 	}
 }
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 786f00f6b7fd..13ef6284223d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -791,9 +791,9 @@ static bool atkbd_is_portable_device(void)
  * not work. So in this case simply assume a keyboard is connected to avoid
  * confusing some laptop keyboards.
  *
- * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
- * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
- * translated mode that is a no-op.
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
+ * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
+ * and in translated mode that is a no-op.
  */
 static bool atkbd_skip_getid(struct atkbd *atkbd)
 {
@@ -811,6 +811,7 @@ static int atkbd_probe(struct atkbd *atkbd)
 {
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[2];
+	bool skip_getid;
 
 /*
  * Some systems, where the bit-twiddling when testing the io-lines of the
@@ -832,7 +833,8 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
-	if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+	skip_getid = atkbd_skip_getid(atkbd);
+	if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
 
 /*
  * If the get ID command was skipped or failed, we check if we can at least set
@@ -842,7 +844,7 @@ static int atkbd_probe(struct atkbd *atkbd)
 		param[0] = 0;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
 			return -1;
-		atkbd->id = 0xabba;
+		atkbd->id = skip_getid ? 0xab83 : 0xabba;
 		return 0;
 	}
 
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 1b4937dce672..52fba9ee7c1d 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -10,10 +10,11 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/i2c.h>
 #include <linux/gpio/consumer.h>
+#include <linux/bitfield.h>
 
 #define CAP11XX_REG_MAIN_CONTROL	0x00
 #define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
@@ -24,6 +25,7 @@
 #define CAP11XX_REG_NOISE_FLAG_STATUS	0x0a
 #define CAP11XX_REG_SENOR_DELTA(X)	(0x10 + (X))
 #define CAP11XX_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK	0x70
 #define CAP11XX_REG_CONFIG		0x20
 #define CAP11XX_REG_SENSOR_ENABLE	0x21
 #define CAP11XX_REG_SENSOR_CONFIG	0x22
@@ -32,6 +34,7 @@
 #define CAP11XX_REG_CALIBRATION		0x26
 #define CAP11XX_REG_INT_ENABLE		0x27
 #define CAP11XX_REG_REPEAT_RATE		0x28
+#define CAP11XX_REG_SIGNAL_GUARD_ENABLE	0x29
 #define CAP11XX_REG_MT_CONFIG		0x2a
 #define CAP11XX_REG_MT_PATTERN_CONFIG	0x2b
 #define CAP11XX_REG_MT_PATTERN		0x2d
@@ -47,6 +50,8 @@
 #define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
 #define CAP11XX_REG_LED_POLARITY	0x73
 #define CAP11XX_REG_LED_OUTPUT_CONTROL	0x74
+#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG	0x80
+#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2	0x81
 
 #define CAP11XX_REG_LED_DUTY_CYCLE_1	0x90
 #define CAP11XX_REG_LED_DUTY_CYCLE_2	0x91
@@ -78,12 +83,20 @@ struct cap11xx_led {
 
 struct cap11xx_priv {
 	struct regmap *regmap;
+	struct device *dev;
 	struct input_dev *idev;
+	const struct cap11xx_hw_model *model;
+	u8 id;
 
 	struct cap11xx_led *leds;
 	int num_leds;
 
 	/* config */
+	u8 analog_gain;
+	u8 sensitivity_delta_sense;
+	u8 signal_guard_inputs_mask;
+	u32 thresholds[8];
+	u32 calib_sensitivities[8];
 	u32 keycodes[];
 };
 
@@ -160,9 +173,6 @@ static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
 	case CAP11XX_REG_SENOR_DELTA(3):
 	case CAP11XX_REG_SENOR_DELTA(4):
 	case CAP11XX_REG_SENOR_DELTA(5):
-	case CAP11XX_REG_PRODUCT_ID:
-	case CAP11XX_REG_MANUFACTURER_ID:
-	case CAP11XX_REG_REVISION:
 		return true;
 	}
 
@@ -177,10 +187,179 @@ static const struct regmap_config cap11xx_regmap_config = {
 	.reg_defaults = cap11xx_reg_defaults,
 
 	.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = cap11xx_volatile_reg,
 };
 
+static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv)
+{
+	return regmap_write(priv->regmap,
+			    CAP11XX_REG_CALIB_SENSITIVITY_CONFIG,
+			    (priv->calib_sensitivities[3] << 6) |
+			    (priv->calib_sensitivities[2] << 4) |
+			    (priv->calib_sensitivities[1] << 2) |
+			    priv->calib_sensitivities[0]);
+}
+
+static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv)
+{
+	return regmap_write(priv->regmap,
+			    CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2,
+			    (priv->calib_sensitivities[7] << 6) |
+			    (priv->calib_sensitivities[6] << 4) |
+			    (priv->calib_sensitivities[5] << 2) |
+			    priv->calib_sensitivities[4]);
+}
+
+static int cap11xx_init_keys(struct cap11xx_priv *priv)
+{
+	struct device_node *node = priv->dev->of_node;
+	struct device *dev = priv->dev;
+	int i, error;
+	u32 u32_val;
+
+	if (!node) {
+		dev_err(dev, "Corresponding DT entry is not available\n");
+		return -ENODEV;
+	}
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) {
+		if (priv->model->no_gain) {
+			dev_warn(dev,
+				 "This model doesn't support 'sensor-gain'\n");
+		} else if (is_power_of_2(u32_val) && u32_val <= 8) {
+			priv->analog_gain = (u8)ilog2(u32_val);
+
+			error = regmap_update_bits(priv->regmap,
+				CAP11XX_REG_MAIN_CONTROL,
+				CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
+				priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
+			if (error)
+				return error;
+		} else {
+			dev_err(dev, "Invalid sensor-gain value %u\n", u32_val);
+			return -EINVAL;
+		}
+	}
+
+	if (of_property_read_bool(node, "microchip,irq-active-high")) {
+		if (priv->id == CAP1106 ||
+		    priv->id == CAP1126 ||
+		    priv->id == CAP1188) {
+			error = regmap_update_bits(priv->regmap,
+						   CAP11XX_REG_CONFIG2,
+						   CAP11XX_REG_CONFIG2_ALT_POL,
+						   0);
+			if (error)
+				return error;
+		} else {
+			dev_warn(dev,
+				 "This model doesn't support 'irq-active-high'\n");
+		}
+	}
+
+	if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) {
+		if (!is_power_of_2(u32_val) || u32_val > 128) {
+			dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val);
+			return -EINVAL;
+		}
+
+		priv->sensitivity_delta_sense = (u8)ilog2(u32_val);
+		u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
+					priv->sensitivity_delta_sense));
+
+		error = regmap_update_bits(priv->regmap,
+					   CAP11XX_REG_SENSITIVITY_CONTROL,
+					   CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
+					   u32_val);
+		if (error)
+			return error;
+	}
+
+	if (!of_property_read_u32_array(node, "microchip,input-threshold",
+					priv->thresholds, priv->model->num_channels)) {
+		for (i = 0; i < priv->model->num_channels; i++) {
+			if (priv->thresholds[i] > 127) {
+				dev_err(dev, "Invalid input-threshold value %u\n",
+					priv->thresholds[i]);
+				return -EINVAL;
+			}
+
+			error = regmap_write(priv->regmap,
+					     CAP11XX_REG_SENSOR_THRESH(i),
+					     priv->thresholds[i]);
+			if (error)
+				return error;
+		}
+	}
+
+	if (!of_property_read_u32_array(node, "microchip,calib-sensitivity",
+					priv->calib_sensitivities,
+					priv->model->num_channels)) {
+		if (priv->id == CAP1293 || priv->id == CAP1298) {
+			for (i = 0; i < priv->model->num_channels; i++) {
+				if (!is_power_of_2(priv->calib_sensitivities[i]) ||
+				    priv->calib_sensitivities[i] > 4) {
+					dev_err(dev, "Invalid calib-sensitivity value %u\n",
+						priv->calib_sensitivities[i]);
+					return -EINVAL;
+				}
+				priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]);
+			}
+
+			error = cap11xx_write_calib_sens_config_1(priv);
+			if (error)
+				return error;
+
+			if (priv->id == CAP1298) {
+				error = cap11xx_write_calib_sens_config_2(priv);
+				if (error)
+					return error;
+			}
+		} else {
+			dev_warn(dev,
+				 "This model doesn't support 'calib-sensitivity'\n");
+		}
+	}
+
+	for (i = 0; i < priv->model->num_channels; i++) {
+		if (!of_property_read_u32_index(node, "microchip,signal-guard",
+						i, &u32_val)) {
+			if (u32_val > 1)
+				return -EINVAL;
+			if (u32_val)
+				priv->signal_guard_inputs_mask |= 0x01 << i;
+		}
+	}
+
+	if (priv->signal_guard_inputs_mask) {
+		if (priv->id == CAP1293 || priv->id == CAP1298) {
+			error = regmap_write(priv->regmap,
+					     CAP11XX_REG_SIGNAL_GUARD_ENABLE,
+					     priv->signal_guard_inputs_mask);
+			if (error)
+				return error;
+		} else {
+			dev_warn(dev,
+				 "This model doesn't support 'signal-guard'\n");
+		}
+	}
+
+	/* Provide some useful defaults */
+	for (i = 0; i < priv->model->num_channels; i++)
+		priv->keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   priv->keycodes, priv->model->num_channels);
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	return 0;
+}
+
 static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
 {
 	struct cap11xx_priv *priv = data;
@@ -332,11 +511,9 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 	const struct i2c_device_id *id = i2c_client_get_device_id(i2c_client);
 	struct device *dev = &i2c_client->dev;
 	struct cap11xx_priv *priv;
-	struct device_node *node;
 	const struct cap11xx_hw_model *cap;
-	int i, error, irq, gain = 0;
+	int i, error;
 	unsigned int val, rev;
-	u32 gain32;
 
 	if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
 		dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
@@ -355,6 +532,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->dev = dev;
+
 	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
@@ -384,50 +563,15 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 		return error;
 
 	dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n",
-		 id->name, rev);
-	node = dev->of_node;
-
-	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
-		if (cap->no_gain)
-			dev_warn(dev,
-				 "This version doesn't support sensor gain\n");
-		else if (is_power_of_2(gain32) && gain32 <= 8)
-			gain = ilog2(gain32);
-		else
-			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
-	}
+			 id->name, rev);
 
-	if (id->driver_data == CAP1106 ||
-	    id->driver_data == CAP1126 ||
-	    id->driver_data == CAP1188) {
-		if (of_property_read_bool(node, "microchip,irq-active-high")) {
-			error = regmap_update_bits(priv->regmap,
-						   CAP11XX_REG_CONFIG2,
-						   CAP11XX_REG_CONFIG2_ALT_POL,
-						   0);
-			if (error)
-				return error;
-		}
-	}
-
-	/* Provide some useful defaults */
-	for (i = 0; i < cap->num_channels; i++)
-		priv->keycodes[i] = KEY_A + i;
-
-	of_property_read_u32_array(node, "linux,keycodes",
-				   priv->keycodes, cap->num_channels);
+	priv->model = cap;
+	priv->id = id->driver_data;
 
-	if (!cap->no_gain) {
-		error = regmap_update_bits(priv->regmap,
-				CAP11XX_REG_MAIN_CONTROL,
-				CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
-				gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
-		if (error)
-			return error;
-	}
+	dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n",
+		 id->name, rev);
 
-	/* Disable autorepeat. The Linux input system has its own handling. */
-	error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+	error = cap11xx_init_keys(priv);
 	if (error)
 		return error;
 
@@ -439,7 +583,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 	priv->idev->id.bustype = BUS_I2C;
 	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
 
-	if (of_property_read_bool(node, "autorepeat"))
+	if (of_property_read_bool(dev->of_node, "autorepeat"))
 		__set_bit(EV_REP, priv->idev->evbit);
 
 	for (i = 0; i < cap->num_channels; i++)
@@ -474,13 +618,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 	if (error)
 		return error;
 
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq) {
-		dev_err(dev, "Unable to parse or map IRQ\n");
-		return -ENXIO;
-	}
-
-	error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
+	error = devm_request_threaded_irq(dev, i2c_client->irq,
+					  NULL, cap11xx_thread_func,
 					  IRQF_ONESHOT, dev_name(dev), priv);
 	if (error)
 		return error;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2e7c2c046e67..9f3bcd41cf67 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -45,7 +45,9 @@ struct gpio_button_data {
 	unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */
 
 	unsigned int irq;
+	unsigned int wakeirq;
 	unsigned int wakeup_trigger_type;
+
 	spinlock_t lock;
 	bool disabled;
 	bool key_pressed;
@@ -511,6 +513,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	struct gpio_button_data *bdata = &ddata->data[idx];
 	irq_handler_t isr;
 	unsigned long irqflags;
+	const char *wakedesc;
 	int irq;
 	int error;
 
@@ -575,15 +578,23 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 					!gpiod_cansleep(bdata->gpiod);
 		}
 
+		/*
+		 * If an interrupt was specified, use it instead of the gpio
+		 * interrupt and use the gpio for reading the state. A separate
+		 * interrupt may be used as the main button interrupt for
+		 * runtime PM to detect events also in deeper idle states. If a
+		 * dedicated wakeirq is used for system suspend only, see below
+		 * for bdata->wakeirq setup.
+		 */
 		if (button->irq) {
 			bdata->irq = button->irq;
 		} else {
 			irq = gpiod_to_irq(bdata->gpiod);
 			if (irq < 0) {
 				error = irq;
-				dev_err(dev,
-					"Unable to get irq number for GPIO %d, error %d\n",
-					button->gpio, error);
+				dev_err_probe(dev, error,
+					      "Unable to get irq number for GPIO %d\n",
+					      button->gpio);
 				return error;
 			}
 			bdata->irq = irq;
@@ -672,6 +683,36 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 		return error;
 	}
 
+	if (!button->wakeirq)
+		return 0;
+
+	/* Use :wakeup suffix like drivers/base/power/wakeirq.c does */
+	wakedesc = devm_kasprintf(dev, GFP_KERNEL, "%s:wakeup", desc);
+	if (!wakedesc)
+		return -ENOMEM;
+
+	bdata->wakeirq = button->wakeirq;
+	irqflags |= IRQF_NO_SUSPEND;
+
+	/*
+	 * Wakeirq shares the handler with the main interrupt, it's only
+	 * active during system suspend. See gpio_keys_button_enable_wakeup()
+	 * and gpio_keys_button_disable_wakeup().
+	 */
+	error = devm_request_any_context_irq(dev, bdata->wakeirq, isr,
+					     irqflags, wakedesc, bdata);
+	if (error < 0) {
+		dev_err(dev, "Unable to claim wakeirq %d; error %d\n",
+			bdata->irq, error);
+		return error;
+	}
+
+	/*
+	 * Disable wakeirq until suspend. IRQF_NO_AUTOEN won't work if
+	 * IRQF_SHARED was set based on !button->can_disable.
+	 */
+	disable_irq(bdata->wakeirq);
+
 	return 0;
 }
 
@@ -728,7 +769,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	struct gpio_keys_platform_data *pdata;
 	struct gpio_keys_button *button;
 	struct fwnode_handle *child;
-	int nbuttons;
+	int nbuttons, irq;
 
 	nbuttons = device_get_child_node_count(dev);
 	if (nbuttons == 0)
@@ -750,9 +791,19 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	device_property_read_string(dev, "label", &pdata->name);
 
 	device_for_each_child_node(dev, child) {
-		if (is_of_node(child))
-			button->irq =
-				irq_of_parse_and_map(to_of_node(child), 0);
+		if (is_of_node(child)) {
+			irq = of_irq_get_byname(to_of_node(child), "irq");
+			if (irq > 0)
+				button->irq = irq;
+
+			irq = of_irq_get_byname(to_of_node(child), "wakeup");
+			if (irq > 0)
+				button->wakeirq = irq;
+
+			if (!button->irq && !button->wakeirq)
+				button->irq =
+					irq_of_parse_and_map(to_of_node(child), 0);
+		}
 
 		if (fwnode_property_read_u32(child, "linux,code",
 					     &button->code)) {
@@ -921,6 +972,11 @@ gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata)
 		}
 	}
 
+	if (bdata->wakeirq) {
+		enable_irq(bdata->wakeirq);
+		disable_irq(bdata->irq);
+	}
+
 	return 0;
 }
 
@@ -929,6 +985,11 @@ gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata)
 {
 	int error;
 
+	if (bdata->wakeirq) {
+		enable_irq(bdata->irq);
+		disable_irq(bdata->wakeirq);
+	}
+
 	/*
 	 * The trigger type is always both edges for gpio-based keys and we do
 	 * not support changing wakeup trigger for interrupt-based keys.
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 454fb8675657..16f936db7305 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -21,7 +21,6 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <linux/soc/ti/omap1-io.h>
@@ -49,9 +48,6 @@ struct omap_kp {
 
 static DECLARE_TASKLET_DISABLED_OLD(kp_tasklet, omap_kp_tasklet);
 
-static unsigned int *row_gpios;
-static unsigned int *col_gpios;
-
 static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 {
 	/* disable keyboard interrupt and schedule for handling */
@@ -180,7 +176,7 @@ static int omap_kp_probe(struct platform_device *pdev)
 	struct omap_kp *omap_kp;
 	struct input_dev *input_dev;
 	struct omap_kp_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int i, col_idx, row_idx, ret;
+	int ret;
 	unsigned int row_shift, keycodemax;
 
 	if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
@@ -209,17 +205,9 @@ static int omap_kp_probe(struct platform_device *pdev)
 	if (pdata->delay)
 		omap_kp->delay = pdata->delay;
 
-	if (pdata->row_gpios && pdata->col_gpios) {
-		row_gpios = pdata->row_gpios;
-		col_gpios = pdata->col_gpios;
-	}
-
 	omap_kp->rows = pdata->rows;
 	omap_kp->cols = pdata->cols;
 
-	col_idx = 0;
-	row_idx = 0;
-
 	timer_setup(&omap_kp->timer, omap_kp_timer, 0);
 
 	/* get the irq and init timer*/
@@ -276,11 +264,6 @@ err4:
 err3:
 	device_remove_file(&pdev->dev, &dev_attr_enable);
 err2:
-	for (i = row_idx - 1; i >= 0; i--)
-		gpio_free(row_gpios[i]);
-	for (i = col_idx - 1; i >= 0; i--)
-		gpio_free(col_gpios[i]);
-
 	kfree(omap_kp);
 	input_free_device(input_dev);
 
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index d3f8688fdd9c..040b340995d8 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -83,6 +84,7 @@ struct omap4_keypad {
 	bool no_autorepeat;
 	u64 keys;
 	unsigned short *keymap;
+	struct clk *fck;
 };
 
 static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
@@ -209,6 +211,10 @@ static int omap4_keypad_open(struct input_dev *input)
 	if (error)
 		return error;
 
+	error = clk_prepare_enable(keypad_data->fck);
+	if (error)
+		goto out;
+
 	disable_irq(keypad_data->irq);
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
@@ -226,10 +232,11 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	enable_irq(keypad_data->irq);
 
+out:
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
-	return 0;
+	return error;
 }
 
 static void omap4_keypad_stop(struct omap4_keypad *keypad_data)
@@ -258,6 +265,7 @@ static void omap4_keypad_close(struct input_dev *input)
 	disable_irq(keypad_data->irq);
 	omap4_keypad_stop(keypad_data);
 	enable_irq(keypad_data->irq);
+	clk_disable_unprepare(keypad_data->fck);
 
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
@@ -356,6 +364,11 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad_data->irq = irq;
+	keypad_data->fck = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(keypad_data->fck))
+		return dev_err_probe(&pdev->dev, PTR_ERR(keypad_data->fck),
+				     "unable to get fck");
+
 	mutex_init(&keypad_data->lock);
 	platform_set_drvdata(pdev, keypad_data);
 
diff --git a/drivers/input/keyboard/qt1050.c b/drivers/input/keyboard/qt1050.c
index 6953097db445..b51dfcd76038 100644
--- a/drivers/input/keyboard/qt1050.c
+++ b/drivers/input/keyboard/qt1050.c
@@ -213,7 +213,7 @@ static struct regmap_config qt1050_regmap_config = {
 	.val_bits = 8,
 	.max_register = QT1050_RES_CAL,
 
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 
 	.wr_table = &qt1050_writeable_table,
 	.rd_table = &qt1050_readable_table,
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 8af59ced1ec2..677bc4baa5d1 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/tca6416_keypad.h>
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
index 74808bae326a..c338765e0ecd 100644
--- a/drivers/input/misc/da9063_onkey.c
+++ b/drivers/input/misc/da9063_onkey.c
@@ -9,11 +9,12 @@
 #include <linux/errno.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
+#include <linux/property.h>
 #include <linux/workqueue.h>
 #include <linux/regmap.h>
-#include <linux/of.h>
 #include <linux/mfd/da9063/core.h>
 #include <linux/mfd/da9063/registers.h>
 #include <linux/mfd/da9062/core.h>
@@ -74,13 +75,6 @@ static const struct da906x_chip_config da9062_regs = {
 	.name = "da9062-onkey",
 };
 
-static const struct of_device_id da9063_compatible_reg_id_table[] = {
-	{ .compatible = "dlg,da9063-onkey", .data = &da9063_regs },
-	{ .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
-
 static void da9063_poll_on(struct work_struct *work)
 {
 	struct da9063_onkey *onkey = container_of(work,
@@ -187,56 +181,43 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
 static int da9063_onkey_probe(struct platform_device *pdev)
 {
 	struct da9063_onkey *onkey;
-	const struct of_device_id *match;
-	int irq;
 	int error;
-
-	match = of_match_node(da9063_compatible_reg_id_table,
-			      pdev->dev.of_node);
-	if (!match)
-		return -ENXIO;
+	int irq;
 
 	onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
 			     GFP_KERNEL);
-	if (!onkey) {
-		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+	if (!onkey)
 		return -ENOMEM;
-	}
 
-	onkey->config = match->data;
+	onkey->config = device_get_match_data(&pdev->dev);
+	if (!onkey->config)
+		return -ENXIO;
+
 	onkey->dev = &pdev->dev;
 
 	onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!onkey->regmap) {
-		dev_err(&pdev->dev, "Parent regmap unavailable.\n");
-		return -ENXIO;
-	}
+	if (!onkey->regmap)
+		return dev_err_probe(&pdev->dev, -ENXIO,
+				     "Parent regmap unavailable.\n");
 
-	onkey->key_power = !of_property_read_bool(pdev->dev.of_node,
-						  "dlg,disable-key-power");
+	onkey->key_power = !device_property_read_bool(&pdev->dev,
+						      "dlg,disable-key-power");
 
 	onkey->input = devm_input_allocate_device(&pdev->dev);
-	if (!onkey->input) {
-		dev_err(&pdev->dev, "Failed to allocated input device.\n");
+	if (!onkey->input)
 		return -ENOMEM;
-	}
 
 	onkey->input->name = onkey->config->name;
 	snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0",
 		 onkey->config->name);
 	onkey->input->phys = onkey->phys;
-	onkey->input->dev.parent = &pdev->dev;
 
 	input_set_capability(onkey->input, EV_KEY, KEY_POWER);
 
 	error = devm_delayed_work_autocancel(&pdev->dev, &onkey->work,
 					     da9063_poll_on);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to add cancel poll action: %d\n",
-			error);
+	if (error)
 		return error;
-	}
 
 	irq = platform_get_irq_byname(pdev, "ONKEY");
 	if (irq < 0)
@@ -246,11 +227,9 @@ static int da9063_onkey_probe(struct platform_device *pdev)
 					  NULL, da9063_onkey_irq_handler,
 					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 					  "ONKEY", onkey);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to request IRQ %d: %d\n", irq, error);
-		return error;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error,
+				     "Failed to allocate onkey IRQ\n");
 
 	error = dev_pm_set_wake_irq(&pdev->dev, irq);
 	if (error)
@@ -261,15 +240,19 @@ static int da9063_onkey_probe(struct platform_device *pdev)
 		device_init_wakeup(&pdev->dev, true);
 
 	error = input_register_device(onkey->input);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Failed to register input device: %d\n", error);
+	if (error)
 		return error;
-	}
 
 	return 0;
 }
 
+static const struct of_device_id da9063_compatible_reg_id_table[] = {
+	{ .compatible = "dlg,da9063-onkey", .data = &da9063_regs },
+	{ .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
+
 static struct platform_driver da9063_onkey_driver = {
 	.probe	= da9063_onkey_probe,
 	.driver	= {
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index b2f1292e27ef..6e8cc28debd9 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1050,7 +1050,7 @@ static ssize_t ims_pcu_attribute_show(struct device *dev,
 			container_of(dattr, struct ims_pcu_attribute, dattr);
 	char *field = (char *)pcu + attr->field_offset;
 
-	return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field);
+	return sysfs_emit(buf, "%.*s\n", attr->field_length, field);
 }
 
 static ssize_t ims_pcu_attribute_store(struct device *dev,
@@ -1206,7 +1206,7 @@ ims_pcu_update_firmware_status_show(struct device *dev,
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct ims_pcu *pcu = usb_get_intfdata(intf);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status);
+	return sysfs_emit(buf, "%d\n", pcu->update_firmware_status);
 }
 
 static DEVICE_ATTR(update_firmware_status, S_IRUGO,
@@ -1309,7 +1309,7 @@ static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%x\n", data);
+	return sysfs_emit(buf, "%x\n", data);
 }
 
 static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev,
@@ -1344,7 +1344,7 @@ static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev,
 	int error;
 
 	mutex_lock(&pcu->cmd_mutex);
-	error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr);
+	error = sysfs_emit(buf, "%x\n", pcu->ofn_reg_addr);
 	mutex_unlock(&pcu->cmd_mutex);
 
 	return error;
@@ -1397,7 +1397,7 @@ static ssize_t ims_pcu_ofn_bit_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr)));
+	return sysfs_emit(buf, "%d\n", !!(data & (1 << attr->nr)));
 }
 
 static ssize_t ims_pcu_ofn_bit_store(struct device *dev,
diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
index 3c636c75e8a1..cd14ff9f57cf 100644
--- a/drivers/input/misc/iqs269a.c
+++ b/drivers/input/misc/iqs269a.c
@@ -9,6 +9,7 @@
  * axial sliders presented by the device.
  */
 
+#include <linux/bits.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -26,6 +27,8 @@
 
 #define IQS269_VER_INFO				0x00
 #define IQS269_VER_INFO_PROD_NUM		0x4F
+#define IQS269_VER_INFO_FW_NUM_2		0x03
+#define IQS269_VER_INFO_FW_NUM_3		0x10
 
 #define IQS269_SYS_FLAGS			0x02
 #define IQS269_SYS_FLAGS_SHOW_RESET		BIT(15)
@@ -53,6 +56,7 @@
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_MASK	GENMASK(10, 8)
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT	8
 #define IQS269_SYS_SETTINGS_ULP_UPDATE_MAX	7
+#define IQS269_SYS_SETTINGS_SLIDER_SWIPE	BIT(7)
 #define IQS269_SYS_SETTINGS_RESEED_OFFSET	BIT(6)
 #define IQS269_SYS_SETTINGS_EVENT_MODE		BIT(5)
 #define IQS269_SYS_SETTINGS_EVENT_MODE_LP	BIT(4)
@@ -69,6 +73,7 @@
 #define IQS269_FILT_STR_MAX			3
 
 #define IQS269_EVENT_MASK_SYS			BIT(6)
+#define IQS269_EVENT_MASK_GESTURE		BIT(3)
 #define IQS269_EVENT_MASK_DEEP			BIT(2)
 #define IQS269_EVENT_MASK_TOUCH			BIT(1)
 #define IQS269_EVENT_MASK_PROX			BIT(0)
@@ -97,6 +102,15 @@
 #define IQS269_MISC_B_TRACKING_UI_ENABLE	BIT(4)
 #define IQS269_MISC_B_FILT_STR_SLIDER		GENMASK(1, 0)
 
+#define IQS269_TOUCH_HOLD_SLIDER_SEL		0x89
+#define IQS269_TOUCH_HOLD_DEFAULT		0x14
+#define IQS269_TOUCH_HOLD_MS_MIN		256
+#define IQS269_TOUCH_HOLD_MS_MAX		65280
+
+#define IQS269_TIMEOUT_TAP_MS_MAX		4080
+#define IQS269_TIMEOUT_SWIPE_MS_MAX		4080
+#define IQS269_THRESH_SWIPE_MAX			255
+
 #define IQS269_CHx_ENG_A_MEAS_CAP_SIZE		BIT(15)
 #define IQS269_CHx_ENG_A_RX_GND_INACTIVE	BIT(13)
 #define IQS269_CHx_ENG_A_LOCAL_CAP_SIZE		BIT(12)
@@ -142,6 +156,10 @@
 
 #define IQS269_MAX_REG				0xFF
 
+#define IQS269_OTP_OPTION_DEFAULT		0x00
+#define IQS269_OTP_OPTION_TWS			0xD0
+#define IQS269_OTP_OPTION_HOLD			BIT(7)
+
 #define IQS269_NUM_CH				8
 #define IQS269_NUM_SL				2
 
@@ -175,6 +193,20 @@ enum iqs269_event_id {
 	IQS269_EVENT_DEEP_UP,
 };
 
+enum iqs269_slider_id {
+	IQS269_SLIDER_NONE,
+	IQS269_SLIDER_KEY,
+	IQS269_SLIDER_RAW,
+};
+
+enum iqs269_gesture_id {
+	IQS269_GESTURE_TAP,
+	IQS269_GESTURE_HOLD,
+	IQS269_GESTURE_FLICK_POS,
+	IQS269_GESTURE_FLICK_NEG,
+	IQS269_NUM_GESTURES,
+};
+
 struct iqs269_switch_desc {
 	unsigned int code;
 	bool enabled;
@@ -234,7 +266,7 @@ struct iqs269_ver_info {
 	u8 prod_num;
 	u8 sw_num;
 	u8 hw_num;
-	u8 padding;
+	u8 fw_num;
 } __packed;
 
 struct iqs269_ch_reg {
@@ -285,16 +317,42 @@ struct iqs269_private {
 	struct regmap *regmap;
 	struct mutex lock;
 	struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)];
+	struct iqs269_ver_info ver_info;
 	struct iqs269_sys_reg sys_reg;
 	struct completion ati_done;
 	struct input_dev *keypad;
 	struct input_dev *slider[IQS269_NUM_SL];
 	unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
+	unsigned int sl_code[IQS269_NUM_SL][IQS269_NUM_GESTURES];
+	unsigned int otp_option;
 	unsigned int ch_num;
 	bool hall_enable;
 	bool ati_current;
 };
 
+static enum iqs269_slider_id iqs269_slider_type(struct iqs269_private *iqs269,
+						int slider_num)
+{
+	int i;
+
+	/*
+	 * Slider 1 is unavailable if the touch-and-hold option is enabled via
+	 * OTP. In that case, the channel selection register is repurposed for
+	 * the touch-and-hold timer ceiling.
+	 */
+	if (slider_num && (iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
+		return IQS269_SLIDER_NONE;
+
+	if (!iqs269->sys_reg.slider_select[slider_num])
+		return IQS269_SLIDER_NONE;
+
+	for (i = 0; i < IQS269_NUM_GESTURES; i++)
+		if (iqs269->sl_code[slider_num][i] != KEY_RESERVED)
+			return IQS269_SLIDER_KEY;
+
+	return IQS269_SLIDER_RAW;
+}
+
 static int iqs269_ati_mode_set(struct iqs269_private *iqs269,
 			       unsigned int ch_num, unsigned int mode)
 {
@@ -525,7 +583,8 @@ static int iqs269_parse_chan(struct iqs269_private *iqs269,
 	if (fwnode_property_present(ch_node, "azoteq,slider0-select"))
 		iqs269->sys_reg.slider_select[0] |= BIT(reg);
 
-	if (fwnode_property_present(ch_node, "azoteq,slider1-select"))
+	if (fwnode_property_present(ch_node, "azoteq,slider1-select") &&
+	    !(iqs269->otp_option & IQS269_OTP_OPTION_HOLD))
 		iqs269->sys_reg.slider_select[1] |= BIT(reg);
 
 	ch_reg = &iqs269->sys_reg.ch_reg[reg];
@@ -950,7 +1009,43 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	sys_reg->blocking = 0;
 
 	sys_reg->slider_select[0] = 0;
-	sys_reg->slider_select[1] = 0;
+
+	/*
+	 * If configured via OTP to do so, the device asserts a pulse on the
+	 * GPIO4 pin for approximately 60 ms once a selected channel is held
+	 * in a state of touch for a configurable length of time.
+	 *
+	 * In that case, the register used for slider 1 channel selection is
+	 * repurposed for the touch-and-hold timer ceiling.
+	 */
+	if (iqs269->otp_option & IQS269_OTP_OPTION_HOLD) {
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,touch-hold-ms", &val)) {
+			if (val < IQS269_TOUCH_HOLD_MS_MIN ||
+			    val > IQS269_TOUCH_HOLD_MS_MAX) {
+				dev_err(&client->dev,
+					"Invalid touch-and-hold ceiling: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->slider_select[1] = val / 256;
+		} else if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+			/*
+			 * The default touch-and-hold timer ceiling initially
+			 * read from early revisions of silicon is invalid if
+			 * the device experienced a soft reset between power-
+			 * on and the read operation.
+			 *
+			 * To protect against this case, explicitly cache the
+			 * default value so that it is restored each time the
+			 * device is re-initialized.
+			 */
+			sys_reg->slider_select[1] = IQS269_TOUCH_HOLD_DEFAULT;
+		}
+	} else {
+		sys_reg->slider_select[1] = 0;
+	}
 
 	sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS);
 
@@ -1004,6 +1099,76 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 		general |= (val << IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT);
 	}
 
+	if (device_property_present(&client->dev, "linux,keycodes")) {
+		int scale = 1;
+		int count = device_property_count_u32(&client->dev,
+						      "linux,keycodes");
+		if (count > IQS269_NUM_GESTURES * IQS269_NUM_SL) {
+			dev_err(&client->dev, "Too many keycodes present\n");
+			return -EINVAL;
+		} else if (count < 0) {
+			dev_err(&client->dev, "Failed to count keycodes: %d\n",
+				count);
+			return count;
+		}
+
+		error = device_property_read_u32_array(&client->dev,
+						       "linux,keycodes",
+						       *iqs269->sl_code, count);
+		if (error) {
+			dev_err(&client->dev, "Failed to read keycodes: %d\n",
+				error);
+			return error;
+		}
+
+		if (device_property_present(&client->dev,
+					    "azoteq,gesture-swipe"))
+			general |= IQS269_SYS_SETTINGS_SLIDER_SWIPE;
+
+		/*
+		 * Early revisions of silicon use a more granular step size for
+		 * tap and swipe gesture timeouts; scale them appropriately.
+		 */
+		if (iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3)
+			scale = 4;
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,timeout-tap-ms", &val)) {
+			if (val > IQS269_TIMEOUT_TAP_MS_MAX / scale) {
+				dev_err(&client->dev, "Invalid timeout: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->timeout_tap = val / (16 / scale);
+		}
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,timeout-swipe-ms",
+					      &val)) {
+			if (val > IQS269_TIMEOUT_SWIPE_MS_MAX / scale) {
+				dev_err(&client->dev, "Invalid timeout: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->timeout_swipe = val / (16 / scale);
+		}
+
+		if (!device_property_read_u32(&client->dev,
+					      "azoteq,thresh-swipe", &val)) {
+			if (val > IQS269_THRESH_SWIPE_MAX) {
+				dev_err(&client->dev, "Invalid threshold: %u\n",
+					val);
+				return -EINVAL;
+			}
+
+			sys_reg->thresh_swipe = val;
+		}
+
+		sys_reg->event_mask &= ~IQS269_EVENT_MASK_GESTURE;
+	}
+
 	general &= ~IQS269_SYS_SETTINGS_RESEED_OFFSET;
 	if (device_property_present(&client->dev, "azoteq,reseed-offset"))
 		general |= IQS269_SYS_SETTINGS_RESEED_OFFSET;
@@ -1012,10 +1177,11 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 
 	/*
 	 * As per the datasheet, enable streaming during normal-power mode if
-	 * either slider is in use. In that case, the device returns to event
-	 * mode during low-power mode.
+	 * raw coordinates will be read from either slider. In that case, the
+	 * device returns to event mode during low-power mode.
 	 */
-	if (sys_reg->slider_select[0] || sys_reg->slider_select[1])
+	if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
+	    iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW)
 		general |= IQS269_SYS_SETTINGS_EVENT_MODE_LP;
 
 	general |= IQS269_SYS_SETTINGS_REDO_ATI;
@@ -1026,12 +1192,30 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269)
 	return 0;
 }
 
+static const struct reg_sequence iqs269_tws_init[] = {
+	{ IQS269_TOUCH_HOLD_SLIDER_SEL, IQS269_TOUCH_HOLD_DEFAULT },
+	{ 0xF0, 0x580F },
+	{ 0xF0, 0x59EF },
+};
+
 static int iqs269_dev_init(struct iqs269_private *iqs269)
 {
 	int error;
 
 	mutex_lock(&iqs269->lock);
 
+	/*
+	 * Early revisions of silicon require the following workaround in order
+	 * to restore any OTP-enabled functionality after a soft reset.
+	 */
+	if (iqs269->otp_option == IQS269_OTP_OPTION_TWS &&
+	    iqs269->ver_info.fw_num < IQS269_VER_INFO_FW_NUM_3) {
+		error = regmap_multi_reg_write(iqs269->regmap, iqs269_tws_init,
+					       ARRAY_SIZE(iqs269_tws_init));
+		if (error)
+			goto err_mutex;
+	}
+
 	error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI,
 				   IQS269_HALL_UI_ENABLE,
 				   iqs269->hall_enable ? ~0 : 0);
@@ -1106,19 +1290,37 @@ static int iqs269_input_init(struct iqs269_private *iqs269)
 	}
 
 	for (i = 0; i < IQS269_NUM_SL; i++) {
-		if (!iqs269->sys_reg.slider_select[i])
+		if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_NONE)
 			continue;
 
 		iqs269->slider[i] = devm_input_allocate_device(&client->dev);
 		if (!iqs269->slider[i])
 			return -ENOMEM;
 
+		iqs269->slider[i]->keycodemax = ARRAY_SIZE(iqs269->sl_code[i]);
+		iqs269->slider[i]->keycode = iqs269->sl_code[i];
+		iqs269->slider[i]->keycodesize = sizeof(**iqs269->sl_code);
+
 		iqs269->slider[i]->name = i ? "iqs269a_slider_1"
 					    : "iqs269a_slider_0";
 		iqs269->slider[i]->id.bustype = BUS_I2C;
 
-		input_set_capability(iqs269->slider[i], EV_KEY, BTN_TOUCH);
-		input_set_abs_params(iqs269->slider[i], ABS_X, 0, 255, 0, 0);
+		for (j = 0; j < IQS269_NUM_GESTURES; j++)
+			if (iqs269->sl_code[i][j] != KEY_RESERVED)
+				input_set_capability(iqs269->slider[i], EV_KEY,
+						     iqs269->sl_code[i][j]);
+
+		/*
+		 * Present the slider as a narrow trackpad if one or more chan-
+		 * nels have been selected to participate, but no gestures have
+		 * been mapped to a keycode.
+		 */
+		if (iqs269_slider_type(iqs269, i) == IQS269_SLIDER_RAW) {
+			input_set_capability(iqs269->slider[i],
+					     EV_KEY, BTN_TOUCH);
+			input_set_abs_params(iqs269->slider[i],
+					     ABS_X, 0, 255, 0, 0);
+		}
 
 		error = input_register_device(iqs269->slider[i]);
 		if (error) {
@@ -1167,28 +1369,62 @@ static int iqs269_report(struct iqs269_private *iqs269)
 	if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_IN_ATI)
 		return 0;
 
-	error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, slider_x,
-				sizeof(slider_x));
-	if (error) {
-		dev_err(&client->dev, "Failed to read slider position: %d\n",
-			error);
-		return error;
+	if (iqs269_slider_type(iqs269, 0) == IQS269_SLIDER_RAW ||
+	    iqs269_slider_type(iqs269, 1) == IQS269_SLIDER_RAW) {
+		error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X,
+					slider_x, sizeof(slider_x));
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to read slider position: %d\n", error);
+			return error;
+		}
 	}
 
 	for (i = 0; i < IQS269_NUM_SL; i++) {
-		if (!iqs269->sys_reg.slider_select[i])
+		flags.gesture >>= (i * IQS269_NUM_GESTURES);
+
+		switch (iqs269_slider_type(iqs269, i)) {
+		case IQS269_SLIDER_NONE:
 			continue;
 
-		/*
-		 * Report BTN_TOUCH if any channel that participates in the
-		 * slider is in a state of touch.
-		 */
-		if (flags.states[IQS269_ST_OFFS_TOUCH] &
-		    iqs269->sys_reg.slider_select[i]) {
-			input_report_key(iqs269->slider[i], BTN_TOUCH, 1);
-			input_report_abs(iqs269->slider[i], ABS_X, slider_x[i]);
-		} else {
-			input_report_key(iqs269->slider[i], BTN_TOUCH, 0);
+		case IQS269_SLIDER_KEY:
+			for (j = 0; j < IQS269_NUM_GESTURES; j++)
+				input_report_key(iqs269->slider[i],
+						 iqs269->sl_code[i][j],
+						 flags.gesture & BIT(j));
+
+			if (!(flags.gesture & (BIT(IQS269_GESTURE_FLICK_NEG) |
+					       BIT(IQS269_GESTURE_FLICK_POS) |
+					       BIT(IQS269_GESTURE_TAP))))
+				break;
+
+			input_sync(iqs269->slider[i]);
+
+			/*
+			 * Momentary gestures are followed by a complementary
+			 * release cycle so as to emulate a full keystroke.
+			 */
+			for (j = 0; j < IQS269_NUM_GESTURES; j++)
+				if (j != IQS269_GESTURE_HOLD)
+					input_report_key(iqs269->slider[i],
+							 iqs269->sl_code[i][j],
+							 0);
+			break;
+
+		case IQS269_SLIDER_RAW:
+			/*
+			 * The slider is considered to be in a state of touch
+			 * if any selected channels are in a state of touch.
+			 */
+			state = flags.states[IQS269_ST_OFFS_TOUCH];
+			state &= iqs269->sys_reg.slider_select[i];
+
+			input_report_key(iqs269->slider[i], BTN_TOUCH, state);
+
+			if (state)
+				input_report_abs(iqs269->slider[i],
+						 ABS_X, slider_x[i]);
+			break;
 		}
 
 		input_sync(iqs269->slider[i]);
@@ -1286,7 +1522,7 @@ static ssize_t counts_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", le16_to_cpu(counts));
+	return sysfs_emit(buf, "%u\n", le16_to_cpu(counts));
 }
 
 static ssize_t hall_bin_show(struct device *dev,
@@ -1324,7 +1560,7 @@ static ssize_t hall_bin_show(struct device *dev,
 		return -EINVAL;
 	}
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t hall_enable_show(struct device *dev,
@@ -1332,7 +1568,7 @@ static ssize_t hall_enable_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->hall_enable);
+	return sysfs_emit(buf, "%u\n", iqs269->hall_enable);
 }
 
 static ssize_t hall_enable_store(struct device *dev,
@@ -1362,7 +1598,7 @@ static ssize_t ch_number_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ch_num);
+	return sysfs_emit(buf, "%u\n", iqs269->ch_num);
 }
 
 static ssize_t ch_number_store(struct device *dev,
@@ -1391,8 +1627,7 @@ static ssize_t rx_enable_show(struct device *dev,
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 	struct iqs269_ch_reg *ch_reg = iqs269->sys_reg.ch_reg;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n",
-			 ch_reg[iqs269->ch_num].rx_enable);
+	return sysfs_emit(buf, "%u\n", ch_reg[iqs269->ch_num].rx_enable);
 }
 
 static ssize_t rx_enable_store(struct device *dev,
@@ -1432,7 +1667,7 @@ static ssize_t ati_mode_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_mode_store(struct device *dev,
@@ -1465,7 +1700,7 @@ static ssize_t ati_base_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_base_store(struct device *dev,
@@ -1498,7 +1733,7 @@ static ssize_t ati_target_show(struct device *dev,
 	if (error)
 		return error;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t ati_target_store(struct device *dev,
@@ -1525,9 +1760,9 @@ static ssize_t ati_trigger_show(struct device *dev,
 {
 	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n",
-			 iqs269->ati_current &&
-			 completion_done(&iqs269->ati_done));
+	return sysfs_emit(buf, "%u\n",
+			  iqs269->ati_current &&
+			  completion_done(&iqs269->ati_done));
 }
 
 static ssize_t ati_trigger_store(struct device *dev,
@@ -1596,7 +1831,6 @@ static const struct regmap_config iqs269_regmap_config = {
 
 static int iqs269_probe(struct i2c_client *client)
 {
-	struct iqs269_ver_info ver_info;
 	struct iqs269_private *iqs269;
 	int error;
 
@@ -1618,14 +1852,16 @@ static int iqs269_probe(struct i2c_client *client)
 	mutex_init(&iqs269->lock);
 	init_completion(&iqs269->ati_done);
 
-	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, &ver_info,
-				sizeof(ver_info));
+	iqs269->otp_option = (uintptr_t)device_get_match_data(&client->dev);
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO,
+				&iqs269->ver_info, sizeof(iqs269->ver_info));
 	if (error)
 		return error;
 
-	if (ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
+	if (iqs269->ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
 		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
-			ver_info.prod_num);
+			iqs269->ver_info.prod_num);
 		return -EINVAL;
 	}
 
@@ -1728,7 +1964,18 @@ static int iqs269_resume(struct device *dev)
 static DEFINE_SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume);
 
 static const struct of_device_id iqs269_of_match[] = {
-	{ .compatible = "azoteq,iqs269a" },
+	{
+		.compatible = "azoteq,iqs269a",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-00",
+		.data = (void *)IQS269_OTP_OPTION_DEFAULT,
+	},
+	{
+		.compatible = "azoteq,iqs269a-d0",
+		.data = (void *)IQS269_OTP_OPTION_TWS,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, iqs269_of_match);
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
index 80f4416ffe2f..0e646f1b257b 100644
--- a/drivers/input/misc/max77693-haptic.c
+++ b/drivers/input/misc/max77693-haptic.c
@@ -307,7 +307,7 @@ static int max77693_haptic_probe(struct platform_device *pdev)
 	haptic->suspend_state = false;
 
 	/* Variant-specific init */
-	haptic->dev_type = platform_get_device_id(pdev)->driver_data;
+	haptic->dev_type = max77693->type;
 	switch (haptic->dev_type) {
 	case TYPE_MAX77693:
 		haptic->regmap_haptic = max77693->regmap_haptic;
@@ -406,16 +406,24 @@ static DEFINE_SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
 				max77693_haptic_resume);
 
 static const struct platform_device_id max77693_haptic_id[] = {
-	{ "max77693-haptic", TYPE_MAX77693 },
-	{ "max77843-haptic", TYPE_MAX77843 },
+	{ "max77693-haptic", },
+	{ "max77843-haptic", },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
 
+static const struct of_device_id of_max77693_haptic_dt_match[] = {
+	{ .compatible = "maxim,max77693-haptic", },
+	{ .compatible = "maxim,max77843-haptic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_max77693_haptic_dt_match);
+
 static struct platform_driver max77693_haptic_driver = {
 	.driver		= {
 		.name	= "max77693-haptic",
 		.pm	= pm_sleep_ptr(&max77693_haptic_pm_ops),
+		.of_match_table = of_max77693_haptic_dt_match,
 	},
 	.probe		= max77693_haptic_probe,
 	.id_table	= max77693_haptic_id,
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index a84098448f5b..5979deabe23d 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -756,16 +756,16 @@ static ssize_t cyapa_show_suspend_scanrate(struct device *dev,
 
 	switch (pwr_cmd) {
 	case PWR_MODE_BTN_ONLY:
-		len = scnprintf(buf, PAGE_SIZE, "%s\n", BTN_ONLY_MODE_NAME);
+		len = sysfs_emit(buf, "%s\n", BTN_ONLY_MODE_NAME);
 		break;
 
 	case PWR_MODE_OFF:
-		len = scnprintf(buf, PAGE_SIZE, "%s\n", OFF_MODE_NAME);
+		len = sysfs_emit(buf, "%s\n", OFF_MODE_NAME);
 		break;
 
 	default:
-		len = scnprintf(buf, PAGE_SIZE, "%u\n",
-				cyapa->gen == CYAPA_GEN3 ?
+		len = sysfs_emit(buf, "%u\n",
+				 cyapa->gen == CYAPA_GEN3 ?
 					cyapa_pwr_cmd_to_sleep_time(pwr_cmd) :
 					sleep_time);
 		break;
@@ -877,8 +877,8 @@ static ssize_t cyapa_show_rt_suspend_scanrate(struct device *dev,
 
 	mutex_unlock(&cyapa->state_sync_lock);
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n",
-			 cyapa->gen == CYAPA_GEN3 ?
+	return sysfs_emit(buf, "%u\n",
+			  cyapa->gen == CYAPA_GEN3 ?
 				cyapa_pwr_cmd_to_sleep_time(pwr_cmd) :
 				sleep_time);
 }
@@ -988,8 +988,8 @@ static ssize_t cyapa_show_fm_ver(struct device *dev,
 	error = mutex_lock_interruptible(&cyapa->state_sync_lock);
 	if (error)
 		return error;
-	error = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver,
-			 cyapa->fw_min_ver);
+	error = sysfs_emit(buf, "%d.%d\n",
+			   cyapa->fw_maj_ver, cyapa->fw_min_ver);
 	mutex_unlock(&cyapa->state_sync_lock);
 	return error;
 }
@@ -1004,7 +1004,7 @@ static ssize_t cyapa_show_product_id(struct device *dev,
 	error = mutex_lock_interruptible(&cyapa->state_sync_lock);
 	if (error)
 		return error;
-	size = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id);
+	size = sysfs_emit(buf, "%s\n", cyapa->product_id);
 	mutex_unlock(&cyapa->state_sync_lock);
 	return size;
 }
@@ -1209,8 +1209,8 @@ static ssize_t cyapa_show_mode(struct device *dev,
 	if (error)
 		return error;
 
-	size = scnprintf(buf, PAGE_SIZE, "gen%d %s\n",
-			cyapa->gen, cyapa_state_to_string(cyapa));
+	size = sysfs_emit(buf, "gen%d %s\n",
+			  cyapa->gen, cyapa_state_to_string(cyapa));
 
 	mutex_unlock(&cyapa->state_sync_lock);
 	return size;
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
index a97f4acb6452..60c83bc71d84 100644
--- a/drivers/input/mouse/cyapa_gen3.c
+++ b/drivers/input/mouse/cyapa_gen3.c
@@ -860,7 +860,7 @@ static ssize_t cyapa_gen3_show_baseline(struct device *dev,
 
 	dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n",
 		max_baseline, min_baseline);
-	ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline);
+	ret = sysfs_emit(buf, "%d %d\n", max_baseline, min_baseline);
 
 out:
 	return ret;
diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c
index abf42f77b4c5..2e6bcb07257e 100644
--- a/drivers/input/mouse/cyapa_gen5.c
+++ b/drivers/input/mouse/cyapa_gen5.c
@@ -2418,12 +2418,12 @@ resume_scanning:
 		return resume_error ? resume_error : error;
 
 	/* 12. Output data strings */
-	size = scnprintf(buf, PAGE_SIZE, "%d %d %d %d %d %d %d %d %d %d %d ",
+	size = sysfs_emit(buf, "%d %d %d %d %d %d %d %d %d %d %d ",
 		gidac_mutual_min, gidac_mutual_max, gidac_mutual_ave,
 		lidac_mutual_min, lidac_mutual_max, lidac_mutual_ave,
 		gidac_self_rx, gidac_self_tx,
 		lidac_self_min, lidac_self_max, lidac_self_ave);
-	size += scnprintf(buf + size, PAGE_SIZE - size,
+	size += sysfs_emit_at(buf, size,
 		"%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d\n",
 		raw_cap_mutual_min, raw_cap_mutual_max, raw_cap_mutual_ave,
 		raw_cap_self_min, raw_cap_self_max, raw_cap_self_ave,
diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c
index 0caaf3e64215..4ffe08fee10c 100644
--- a/drivers/input/mouse/cyapa_gen6.c
+++ b/drivers/input/mouse/cyapa_gen6.c
@@ -629,14 +629,14 @@ static ssize_t cyapa_gen6_show_baseline(struct device *dev,
 	if (error)
 		goto resume_scanning;
 
-	size = scnprintf(buf, PAGE_SIZE, "%d %d %d %d %d %d ",
-			data[0],  /* RX Attenuator Mutual */
-			data[1],  /* IDAC Mutual */
-			data[2],  /* RX Attenuator Self RX */
-			data[3],  /* IDAC Self RX */
-			data[4],  /* RX Attenuator Self TX */
-			data[5]	  /* IDAC Self TX */
-			);
+	size = sysfs_emit(buf, "%d %d %d %d %d %d ",
+			  data[0],  /* RX Attenuator Mutual */
+			  data[1],  /* IDAC Mutual */
+			  data[2],  /* RX Attenuator Self RX */
+			  data[3],  /* IDAC Self RX */
+			  data[4],  /* RX Attenuator Self TX */
+			  data[5]   /* IDAC Self TX */
+			 );
 
 	/* 3. Read Attenuator Trim. */
 	data_len = sizeof(data);
@@ -648,8 +648,8 @@ static ssize_t cyapa_gen6_show_baseline(struct device *dev,
 
 	/* set attenuator trim values. */
 	for (i = 0; i < data_len; i++)
-		size += scnprintf(buf + size, PAGE_SIZE - size,	"%d ", data[i]);
-	size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
+		size += sysfs_emit_at(buf, size, "%d ", data[i]);
+	size += sysfs_emit_at(buf, size, "\n");
 
 resume_scanning:
 	/* 4. Resume Scanning*/
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 148a601396f9..8a72c200ccb5 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -572,7 +572,7 @@ static ssize_t elan_sysfs_read_fw_checksum(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "0x%04x\n", data->fw_checksum);
+	return sysfs_emit(buf, "0x%04x\n", data->fw_checksum);
 }
 
 static ssize_t elan_sysfs_read_product_id(struct device *dev,
@@ -582,8 +582,8 @@ static ssize_t elan_sysfs_read_product_id(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, ETP_PRODUCT_ID_FORMAT_STRING "\n",
-		       data->product_id);
+	return sysfs_emit(buf, ETP_PRODUCT_ID_FORMAT_STRING "\n",
+			  data->product_id);
 }
 
 static ssize_t elan_sysfs_read_fw_ver(struct device *dev,
@@ -593,7 +593,7 @@ static ssize_t elan_sysfs_read_fw_ver(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "%d.0\n", data->fw_version);
+	return sysfs_emit(buf, "%d.0\n", data->fw_version);
 }
 
 static ssize_t elan_sysfs_read_sm_ver(struct device *dev,
@@ -603,7 +603,7 @@ static ssize_t elan_sysfs_read_sm_ver(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "%d.0\n", data->sm_version);
+	return sysfs_emit(buf, "%d.0\n", data->sm_version);
 }
 
 static ssize_t elan_sysfs_read_iap_ver(struct device *dev,
@@ -613,7 +613,7 @@ static ssize_t elan_sysfs_read_iap_ver(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "%d.0\n", data->iap_version);
+	return sysfs_emit(buf, "%d.0\n", data->iap_version);
 }
 
 static ssize_t elan_sysfs_update_fw(struct device *dev,
@@ -754,7 +754,7 @@ static ssize_t elan_sysfs_read_mode(struct device *dev,
 	if (error)
 		return error;
 
-	return sprintf(buf, "%d\n", (int)mode);
+	return sysfs_emit(buf, "%d\n", (int)mode);
 }
 
 static DEVICE_ATTR(product_id, S_IRUGO, elan_sysfs_read_product_id, NULL);
@@ -858,7 +858,7 @@ static ssize_t min_show(struct device *dev,
 		goto out;
 	}
 
-	retval = snprintf(buf, PAGE_SIZE, "%d", data->min_baseline);
+	retval = sysfs_emit(buf, "%d", data->min_baseline);
 
 out:
 	mutex_unlock(&data->sysfs_mutex);
@@ -881,7 +881,7 @@ static ssize_t max_show(struct device *dev,
 		goto out;
 	}
 
-	retval = snprintf(buf, PAGE_SIZE, "%d", data->max_baseline);
+	retval = sysfs_emit(buf, "%d", data->max_baseline);
 
 out:
 	mutex_unlock(&data->sysfs_mutex);
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
index c00dc1275da2..ba757783c258 100644
--- a/drivers/input/mouse/navpoint.c
+++ b/drivers/input/mouse/navpoint.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/input.h>
 #include <linux/input/navpoint.h>
 #include <linux/interrupt.h>
@@ -32,7 +32,7 @@ struct navpoint {
 	struct ssp_device	*ssp;
 	struct input_dev	*input;
 	struct device		*dev;
-	int			gpio;
+	struct gpio_desc	*gpiod;
 	int			index;
 	u8			data[1 + HEADER_LENGTH(0xff)];
 };
@@ -170,16 +170,14 @@ static void navpoint_up(struct navpoint *navpoint)
 		dev_err(navpoint->dev,
 			"timeout waiting for SSSR[CSS] to clear\n");
 
-	if (gpio_is_valid(navpoint->gpio))
-		gpio_set_value(navpoint->gpio, 1);
+	gpiod_set_value(navpoint->gpiod, 1);
 }
 
 static void navpoint_down(struct navpoint *navpoint)
 {
 	struct ssp_device *ssp = navpoint->ssp;
 
-	if (gpio_is_valid(navpoint->gpio))
-		gpio_set_value(navpoint->gpio, 0);
+	gpiod_set_value(navpoint->gpiod, 0);
 
 	pxa_ssp_write_reg(ssp, SSCR0, 0);
 
@@ -216,18 +214,9 @@ static int navpoint_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (gpio_is_valid(pdata->gpio)) {
-		error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW,
-					 "SYNAPTICS_ON");
-		if (error)
-			return error;
-	}
-
 	ssp = pxa_ssp_request(pdata->port, pdev->name);
-	if (!ssp) {
-		error = -ENODEV;
-		goto err_free_gpio;
-	}
+	if (!ssp)
+		return -ENODEV;
 
 	/* HaRET does not disable devices before jumping into Linux */
 	if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
@@ -242,10 +231,18 @@ static int navpoint_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 
+	navpoint->gpiod = gpiod_get_optional(&pdev->dev,
+					     NULL, GPIOD_OUT_LOW);
+	if (IS_ERR(navpoint->gpiod)) {
+		error = PTR_ERR(navpoint->gpiod);
+		dev_err(&pdev->dev, "error getting GPIO\n");
+		goto err_free_mem;
+	}
+	gpiod_set_consumer_name(navpoint->gpiod, "SYNAPTICS_ON");
+
 	navpoint->ssp = ssp;
 	navpoint->input = input;
 	navpoint->dev = &pdev->dev;
-	navpoint->gpio = pdata->gpio;
 
 	input->name = pdev->name;
 	input->dev.parent = &pdev->dev;
@@ -288,17 +285,12 @@ err_free_mem:
 	input_free_device(input);
 	kfree(navpoint);
 	pxa_ssp_free(ssp);
-err_free_gpio:
-	if (gpio_is_valid(pdata->gpio))
-		gpio_free(pdata->gpio);
 
 	return error;
 }
 
 static void navpoint_remove(struct platform_device *pdev)
 {
-	const struct navpoint_platform_data *pdata =
-					dev_get_platdata(&pdev->dev);
 	struct navpoint *navpoint = platform_get_drvdata(pdev);
 	struct ssp_device *ssp = navpoint->ssp;
 
@@ -308,9 +300,6 @@ static void navpoint_remove(struct platform_device *pdev)
 	kfree(navpoint);
 
 	pxa_ssp_free(ssp);
-
-	if (gpio_is_valid(pdata->gpio))
-		gpio_free(pdata->gpio);
 }
 
 static int navpoint_suspend(struct device *dev)
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
index d7603c50f864..cc1d4b424640 100644
--- a/drivers/input/rmi4/rmi_f01.c
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -267,8 +267,7 @@ static ssize_t rmi_driver_manufacturer_id_show(struct device *dev,
 	struct rmi_driver_data *data = dev_get_drvdata(dev);
 	struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n",
-			 f01->properties.manufacturer_id);
+	return sysfs_emit(buf, "%d\n", f01->properties.manufacturer_id);
 }
 
 static DEVICE_ATTR(manufacturer_id, 0444,
@@ -280,7 +279,7 @@ static ssize_t rmi_driver_dom_show(struct device *dev,
 	struct rmi_driver_data *data = dev_get_drvdata(dev);
 	struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.dom);
+	return sysfs_emit(buf, "%s\n", f01->properties.dom);
 }
 
 static DEVICE_ATTR(date_of_manufacture, 0444, rmi_driver_dom_show, NULL);
@@ -292,7 +291,7 @@ static ssize_t rmi_driver_product_id_show(struct device *dev,
 	struct rmi_driver_data *data = dev_get_drvdata(dev);
 	struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", f01->properties.product_id);
+	return sysfs_emit(buf, "%s\n", f01->properties.product_id);
 }
 
 static DEVICE_ATTR(product_id, 0444, rmi_driver_product_id_show, NULL);
@@ -304,7 +303,7 @@ static ssize_t rmi_driver_firmware_id_show(struct device *dev,
 	struct rmi_driver_data *data = dev_get_drvdata(dev);
 	struct f01_data *f01 = dev_get_drvdata(&data->f01_container->dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", f01->properties.firmware_id);
+	return sysfs_emit(buf, "%d\n", f01->properties.firmware_id);
 }
 
 static DEVICE_ATTR(firmware_id, 0444, rmi_driver_firmware_id_show, NULL);
@@ -318,8 +317,8 @@ static ssize_t rmi_driver_package_id_show(struct device *dev,
 
 	u32 package_id = f01->properties.package_id;
 
-	return scnprintf(buf, PAGE_SIZE, "%04x.%04x\n",
-			 package_id & 0xffff, (package_id >> 16) & 0xffff);
+	return sysfs_emit(buf, "%04x.%04x\n",
+			  package_id & 0xffff, (package_id >> 16) & 0xffff);
 }
 
 static DEVICE_ATTR(package_id, 0444, rmi_driver_package_id_show, NULL);
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a2c4b3b87f93..542a31448c8f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2818,8 +2818,8 @@ static ssize_t mxt_fw_version_show(struct device *dev,
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
 	struct mxt_info *info = data->info;
-	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
-			 info->version >> 4, info->version & 0xf, info->build);
+	return sysfs_emit(buf, "%u.%u.%02X\n",
+			  info->version >> 4, info->version & 0xf, info->build);
 }
 
 /* Hardware Version is returned as FamilyID.VariantID */
@@ -2828,8 +2828,7 @@ static ssize_t mxt_hw_version_show(struct device *dev,
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
 	struct mxt_info *info = data->info;
-	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
-			 info->family_id, info->variant_id);
+	return sysfs_emit(buf, "%u.%u\n", info->family_id, info->variant_id);
 }
 
 static ssize_t mxt_show_instance(char *buf, int count,
@@ -2839,19 +2838,18 @@ static ssize_t mxt_show_instance(char *buf, int count,
 	int i;
 
 	if (mxt_obj_instances(object) > 1)
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				   "Instance %u\n", instance);
+		count += sysfs_emit_at(buf, count, "Instance %u\n", instance);
 
 	for (i = 0; i < mxt_obj_size(object); i++)
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
-	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+		count += sysfs_emit_at(buf, count, "\t[%2u]: %02x (%d)\n",
+				       i, val[i], val[i]);
+	count += sysfs_emit_at(buf, count, "\n");
 
 	return count;
 }
 
 static ssize_t mxt_object_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
+			       struct device_attribute *attr, char *buf)
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
 	struct mxt_object *object;
@@ -2872,8 +2870,7 @@ static ssize_t mxt_object_show(struct device *dev,
 		if (!mxt_object_readable(object->type))
 			continue;
 
-		count += scnprintf(buf + count, PAGE_SIZE - count,
-				"T%u:\n", object->type);
+		count += sysfs_emit_at(buf, count, "T%u:\n", object->type);
 
 		for (j = 0; j < mxt_obj_instances(object); j++) {
 			u16 size = mxt_obj_size(object);
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 3e102bcc4a1c..2a1db1134476 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -431,7 +431,7 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev,
 		*field = val;
 	}
 
-	count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+	count = sysfs_emit(buf, "%d\n", val);
 out:
 	mutex_unlock(&tsdata->mutex);
 	return error ?: count;
diff --git a/drivers/input/touchscreen/hideep.c b/drivers/input/touchscreen/hideep.c
index 0f58258306bf..eae90676f4e5 100644
--- a/drivers/input/touchscreen/hideep.c
+++ b/drivers/input/touchscreen/hideep.c
@@ -928,8 +928,7 @@ static ssize_t hideep_fw_version_show(struct device *dev,
 	ssize_t len;
 
 	mutex_lock(&ts->dev_mutex);
-	len = scnprintf(buf, PAGE_SIZE, "%04x\n",
-			be16_to_cpu(ts->dwz_info.release_ver));
+	len = sysfs_emit(buf, "%04x\n", be16_to_cpu(ts->dwz_info.release_ver));
 	mutex_unlock(&ts->dev_mutex);
 
 	return len;
@@ -943,8 +942,7 @@ static ssize_t hideep_product_id_show(struct device *dev,
 	ssize_t len;
 
 	mutex_lock(&ts->dev_mutex);
-	len = scnprintf(buf, PAGE_SIZE, "%04x\n",
-			be16_to_cpu(ts->dwz_info.product_id));
+	len = sysfs_emit(buf, "%04x\n", be16_to_cpu(ts->dwz_info.product_id));
 	mutex_unlock(&ts->dev_mutex);
 
 	return len;
diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c
index d0f257989fd6..2e01d87977c1 100644
--- a/drivers/input/touchscreen/hycon-hy46xx.c
+++ b/drivers/input/touchscreen/hycon-hy46xx.c
@@ -202,7 +202,7 @@ static ssize_t hycon_hy46xx_setting_show(struct device *dev,
 		*field = val;
 	}
 
-	count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+	count = sysfs_emit(buf, "%d\n", val);
 
 out:
 	mutex_unlock(&tsdata->mutex);
diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c
index 90c4934e750a..fc4e39b6651a 100644
--- a/drivers/input/touchscreen/ilitek_ts_i2c.c
+++ b/drivers/input/touchscreen/ilitek_ts_i2c.c
@@ -512,12 +512,12 @@ static ssize_t firmware_version_show(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ilitek_ts_data *ts = i2c_get_clientdata(client);
 
-	return scnprintf(buf, PAGE_SIZE,
-			 "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n",
-			 ts->firmware_ver[0], ts->firmware_ver[1],
-			 ts->firmware_ver[2], ts->firmware_ver[3],
-			 ts->firmware_ver[4], ts->firmware_ver[5],
-			 ts->firmware_ver[6], ts->firmware_ver[7]);
+	return sysfs_emit(buf,
+			  "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n",
+			  ts->firmware_ver[0], ts->firmware_ver[1],
+			  ts->firmware_ver[2], ts->firmware_ver[3],
+			  ts->firmware_ver[4], ts->firmware_ver[5],
+			  ts->firmware_ver[6], ts->firmware_ver[7]);
 }
 static DEVICE_ATTR_RO(firmware_version);
 
@@ -527,8 +527,8 @@ static ssize_t product_id_show(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ilitek_ts_data *ts = i2c_get_clientdata(client);
 
-	return scnprintf(buf, PAGE_SIZE, "product id: [%04X], module: [%s]\n",
-			 ts->mcu_ver, ts->product_id);
+	return sysfs_emit(buf, "product id: [%04X], module: [%s]\n",
+			  ts->mcu_ver, ts->product_id);
 }
 static DEVICE_ATTR_RO(product_id);
 
diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c
index a3f4fb85bee5..4d226118f3cc 100644
--- a/drivers/input/touchscreen/iqs5xx.c
+++ b/drivers/input/touchscreen/iqs5xx.c
@@ -943,12 +943,12 @@ static ssize_t fw_info_show(struct device *dev,
 	if (!iqs5xx->dev_id_info.bl_status)
 		return -ENODATA;
 
-	return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n",
-			 be16_to_cpu(iqs5xx->dev_id_info.prod_num),
-			 be16_to_cpu(iqs5xx->dev_id_info.proj_num),
-			 iqs5xx->dev_id_info.major_ver,
-			 iqs5xx->dev_id_info.minor_ver,
-			 iqs5xx->exp_file[0], iqs5xx->exp_file[1]);
+	return sysfs_emit(buf, "%u.%u.%u.%u:%u.%u\n",
+			  be16_to_cpu(iqs5xx->dev_id_info.prod_num),
+			  be16_to_cpu(iqs5xx->dev_id_info.proj_num),
+			  iqs5xx->dev_id_info.major_ver,
+			  iqs5xx->dev_id_info.minor_ver,
+			  iqs5xx->exp_file[0], iqs5xx->exp_file[1]);
 }
 
 static DEVICE_ATTR_WO(fw_file);
diff --git a/drivers/input/touchscreen/iqs7211.c b/drivers/input/touchscreen/iqs7211.c
index dc084f873762..f0a56cde899e 100644
--- a/drivers/input/touchscreen/iqs7211.c
+++ b/drivers/input/touchscreen/iqs7211.c
@@ -2401,12 +2401,12 @@ static ssize_t fw_info_show(struct device *dev,
 {
 	struct iqs7211_private *iqs7211 = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%u.%u.%u.%u:%u.%u\n",
-			 le16_to_cpu(iqs7211->ver_info.prod_num),
-			 le32_to_cpu(iqs7211->ver_info.patch),
-			 le16_to_cpu(iqs7211->ver_info.major),
-			 le16_to_cpu(iqs7211->ver_info.minor),
-			 iqs7211->exp_file[1], iqs7211->exp_file[0]);
+	return sysfs_emit(buf, "%u.%u.%u.%u:%u.%u\n",
+			  le16_to_cpu(iqs7211->ver_info.prod_num),
+			  le32_to_cpu(iqs7211->ver_info.patch),
+			  le16_to_cpu(iqs7211->ver_info.major),
+			  le16_to_cpu(iqs7211->ver_info.minor),
+			  iqs7211->exp_file[1], iqs7211->exp_file[0]);
 }
 
 static DEVICE_ATTR_RO(fw_info);
diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
index aa325486f618..78e1c63e530e 100644
--- a/drivers/input/touchscreen/melfas_mip4.c
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -1336,9 +1336,9 @@ static ssize_t mip4_sysfs_read_fw_version(struct device *dev,
 	/* Take lock to prevent racing with firmware update */
 	mutex_lock(&ts->input->mutex);
 
-	count = snprintf(buf, PAGE_SIZE, "%04X %04X %04X %04X\n",
-			 ts->fw_version.boot, ts->fw_version.core,
-			 ts->fw_version.app, ts->fw_version.param);
+	count = sysfs_emit(buf, "%04X %04X %04X %04X\n",
+			   ts->fw_version.boot, ts->fw_version.core,
+			   ts->fw_version.app, ts->fw_version.param);
 
 	mutex_unlock(&ts->input->mutex);
 
@@ -1362,8 +1362,8 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev,
 	 * product_name shows the name or version of the hardware
 	 * paired with current firmware in the chip.
 	 */
-	count = snprintf(buf, PAGE_SIZE, "%.*s\n",
-			 (int)sizeof(ts->product_name), ts->product_name);
+	count = sysfs_emit(buf, "%.*s\n",
+			   (int)sizeof(ts->product_name), ts->product_name);
 
 	mutex_unlock(&ts->input->mutex);
 
@@ -1382,7 +1382,7 @@ static ssize_t mip4_sysfs_read_product_id(struct device *dev,
 
 	mutex_lock(&ts->input->mutex);
 
-	count = snprintf(buf, PAGE_SIZE, "%04X\n", ts->product_id);
+	count = sysfs_emit(buf, "%04X\n", ts->product_id);
 
 	mutex_unlock(&ts->input->mutex);
 
@@ -1401,8 +1401,8 @@ static ssize_t mip4_sysfs_read_ic_name(struct device *dev,
 
 	mutex_lock(&ts->input->mutex);
 
-	count = snprintf(buf, PAGE_SIZE, "%.*s\n",
-			 (int)sizeof(ts->ic_name), ts->ic_name);
+	count = sysfs_emit(buf, "%.*s\n",
+			   (int)sizeof(ts->ic_name), ts->ic_name);
 
 	mutex_unlock(&ts->input->mutex);
 
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index d6d04b9f04fc..60354ebc7242 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -456,8 +456,8 @@ static ssize_t mtouch_firmware_rev_show(struct device *dev,
 	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
 	struct mtouch_priv *priv = usbtouch->priv;
 
-	return scnprintf(output, PAGE_SIZE, "%1x.%1x\n",
-			 priv->fw_rev_major, priv->fw_rev_minor);
+	return sysfs_emit(output, "%1x.%1x\n",
+			  priv->fw_rev_major, priv->fw_rev_minor);
 }
 static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL);
 
diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c
index 128341a6696b..32c7be54434c 100644
--- a/drivers/input/touchscreen/wdt87xx_i2c.c
+++ b/drivers/input/touchscreen/wdt87xx_i2c.c
@@ -887,7 +887,7 @@ static ssize_t config_csum_show(struct device *dev,
 	cfg_csum = wdt->param.xmls_id1;
 	cfg_csum = (cfg_csum << 16) | wdt->param.xmls_id2;
 
-	return scnprintf(buf, PAGE_SIZE, "%x\n", cfg_csum);
+	return sysfs_emit(buf, "%x\n", cfg_csum);
 }
 
 static ssize_t fw_version_show(struct device *dev,
@@ -896,7 +896,7 @@ static ssize_t fw_version_show(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
 
-	return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.fw_id);
+	return sysfs_emit(buf, "%x\n", wdt->param.fw_id);
 }
 
 static ssize_t plat_id_show(struct device *dev,
@@ -905,7 +905,7 @@ static ssize_t plat_id_show(struct device *dev,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
 
-	return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.plat_id);
+	return sysfs_emit(buf, "%x\n", wdt->param.plat_id);
 }
 
 static ssize_t update_config_store(struct device *dev,
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
index 5be5112845e1..5680075f0bb8 100644
--- a/drivers/input/touchscreen/zforce_ts.c
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/sysfs.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/platform_data/zforce_ts.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
@@ -106,6 +107,7 @@ struct zforce_point {
 struct zforce_ts {
 	struct i2c_client	*client;
 	struct input_dev	*input;
+	struct touchscreen_properties prop;
 	const struct zforce_ts_platdata *pdata;
 	char			phys[32];
 
@@ -266,7 +268,6 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1)
 static int zforce_start(struct zforce_ts *ts)
 {
 	struct i2c_client *client = ts->client;
-	const struct zforce_ts_platdata *pdata = ts->pdata;
 	int ret;
 
 	dev_dbg(&client->dev, "starting device\n");
@@ -277,7 +278,7 @@ static int zforce_start(struct zforce_ts *ts)
 		return ret;
 	}
 
-	ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
+	ret = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y);
 	if (ret) {
 		dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
 		goto error;
@@ -337,7 +338,6 @@ static int zforce_stop(struct zforce_ts *ts)
 static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
 {
 	struct i2c_client *client = ts->client;
-	const struct zforce_ts_platdata *pdata = ts->pdata;
 	struct zforce_point point;
 	int count, i, num = 0;
 
@@ -355,8 +355,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
 		point.coord_y =
 			payload[9 * i + 4] << 8 | payload[9 * i + 3];
 
-		if (point.coord_x > pdata->x_max ||
-		    point.coord_y > pdata->y_max) {
+		if (point.coord_x > ts->prop.max_x ||
+		    point.coord_y > ts->prop.max_y) {
 			dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
 				point.coord_x, point.coord_y);
 			point.coord_x = point.coord_y = 0;
@@ -390,10 +390,9 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
 						point.state != STATE_UP);
 
 		if (point.state != STATE_UP) {
-			input_report_abs(ts->input, ABS_MT_POSITION_X,
-					 point.coord_x);
-			input_report_abs(ts->input, ABS_MT_POSITION_Y,
-					 point.coord_y);
+			touchscreen_report_pos(ts->input, &ts->prop,
+					       point.coord_x, point.coord_y,
+					       true);
 			input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
 					 point.area_major);
 			input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
@@ -719,15 +718,8 @@ static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
-		dev_err(dev, "failed to get x-size property\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
-		dev_err(dev, "failed to get y-size property\n");
-		return ERR_PTR(-EINVAL);
-	}
+	of_property_read_u32(np, "x-size", &pdata->x_max);
+	of_property_read_u32(np, "y-size", &pdata->y_max);
 
 	return pdata;
 }
@@ -856,6 +848,12 @@ static int zforce_probe(struct i2c_client *client)
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
 			     pdata->y_max, 0, 0);
 
+	touchscreen_parse_properties(input_dev, true, &ts->prop);
+	if (ts->prop.max_x == 0 || ts->prop.max_y == 0) {
+		dev_err(&client->dev, "no size specified\n");
+		return -EINVAL;
+	}
+
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
 			     ZFORCE_MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
diff --git a/drivers/input/vivaldi-fmap.c b/drivers/input/vivaldi-fmap.c
index 6dae83d96806..0d29ec014e2f 100644
--- a/drivers/input/vivaldi-fmap.c
+++ b/drivers/input/vivaldi-fmap.c
@@ -27,10 +27,10 @@ ssize_t vivaldi_function_row_physmap_show(const struct vivaldi_data *data,
 		return 0;
 
 	for (i = 0; i < data->num_function_row_keys; i++)
-		size += scnprintf(buf + size, PAGE_SIZE - size,
-				  "%s%02X", size ? " " : "", physmap[i]);
+		size += sysfs_emit_at(buf, size,
+				      "%s%02X", size ? " " : "", physmap[i]);
 	if (size)
-		size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
+		size += sysfs_emit_at(buf, size, "\n");
 
 	return size;
 }