Merge tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...

17 files changed, 48 insertions, 13 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 91adcac875a4..c9d7afe489e8 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -219,10 +219,12 @@ config BMA400
 
 config BMA400_I2C
 	tristate
+	select REGMAP_I2C
 	depends on BMA400
 
 config BMA400_SPI
 	tristate
+	select REGMAP_SPI
 	depends on BMA400
 
 config BMC150_ACCEL
diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c
index feb86fe6c422..62490424b6ae 100644
--- a/drivers/iio/adc/ad4130.c
+++ b/drivers/iio/adc/ad4130.c
@@ -1821,7 +1821,7 @@ static int ad4130_setup_int_clk(struct ad4130_state *st)
 {
 	struct device *dev = &st->spi->dev;
 	struct device_node *of_node = dev_of_node(dev);
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	const char *clk_name;
 	int ret;
 
@@ -1891,10 +1891,14 @@ static int ad4130_setup(struct iio_dev *indio_dev)
 		return ret;
 
 	/*
-	 * Configure all GPIOs for output. If configured, the interrupt function
-	 * of P2 takes priority over the GPIO out function.
+	 * Configure unused GPIOs for output. If configured, the interrupt
+	 * function of P2 takes priority over the GPIO out function.
 	 */
-	val =  AD4130_IO_CONTROL_GPIO_CTRL_MASK;
+	val = 0;
+	for (i = 0; i < AD4130_MAX_GPIOS; i++)
+		if (st->pins_fn[i + AD4130_AIN2_P1] == AD4130_PIN_FN_NONE)
+			val |= FIELD_PREP(AD4130_IO_CONTROL_GPIO_CTRL_MASK, BIT(i));
+
 	val |= FIELD_PREP(AD4130_IO_CONTROL_INT_PIN_SEL_MASK, st->int_pin_sel);
 
 	ret = regmap_write(st->regmap, AD4130_IO_CONTROL_REG, val);
diff --git a/drivers/iio/adc/ad7091r8.c b/drivers/iio/adc/ad7091r8.c
index 57700f124803..700564305057 100644
--- a/drivers/iio/adc/ad7091r8.c
+++ b/drivers/iio/adc/ad7091r8.c
@@ -195,7 +195,7 @@ static int ad7091r8_gpio_setup(struct ad7091r_state *st)
 	st->reset_gpio = devm_gpiod_get_optional(st->dev, "reset",
 						 GPIOD_OUT_HIGH);
 	if (IS_ERR(st->reset_gpio))
-		return dev_err_probe(st->dev, PTR_ERR(st->convst_gpio),
+		return dev_err_probe(st->dev, PTR_ERR(st->reset_gpio),
 				     "Error on requesting reset GPIO\n");
 
 	if (st->reset_gpio) {
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 2de5494e7c22..b15b7a3b66d5 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -48,6 +48,18 @@ config HDC2010
 	  To compile this driver as a module, choose M here: the module
 	  will be called hdc2010.
 
+config HDC3020
+	tristate "TI HDC3020 relative humidity and temperature sensor"
+	depends on I2C
+	select CRC8
+	help
+	  Say yes here to build support for the Texas Instruments
+	  HDC3020, HDC3021 and HDC3022 relative humidity and temperature
+	  sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hdc3020.
+
 config HID_SENSOR_HUMIDITY
 	tristate "HID Environmental humidity sensor"
 	depends on HID_SENSOR_HUB
diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile
index f19ff3de97c5..5fbeef299f61 100644
--- a/drivers/iio/humidity/Makefile
+++ b/drivers/iio/humidity/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_AM2315) += am2315.o
 obj-$(CONFIG_DHT11) += dht11.o
 obj-$(CONFIG_HDC100X) += hdc100x.o
 obj-$(CONFIG_HDC2010) += hdc2010.o
+obj-$(CONFIG_HDC3020) += hdc3020.o
 obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
 
 hts221-y := hts221_core.o \
diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c
index 4e3311170725..ed70415512f6 100644
--- a/drivers/iio/humidity/hdc3020.c
+++ b/drivers/iio/humidity/hdc3020.c
@@ -322,7 +322,7 @@ static int hdc3020_read_raw(struct iio_dev *indio_dev,
 		if (chan->type != IIO_TEMP)
 			return -EINVAL;
 
-		*val = 16852;
+		*val = -16852;
 		return IIO_VAL_INT;
 
 	default:
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
index 83e53acfbe88..c7f5866a177d 100644
--- a/drivers/iio/imu/bno055/Kconfig
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -8,6 +8,7 @@ config BOSCH_BNO055
 config BOSCH_BNO055_SERIAL
 	tristate "Bosch BNO055 attached via UART"
 	depends on SERIAL_DEV_BUS
+	select REGMAP
 	select BOSCH_BNO055
 	help
 	  Enable this to support Bosch BNO055 IMUs attached via UART.
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 9a85752124dd..173dc00762a1 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -1584,10 +1584,13 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 	ret = iio_device_register_sysfs_group(indio_dev,
 					      &iio_dev_opaque->chan_attr_group);
 	if (ret)
-		goto error_clear_attrs;
+		goto error_free_chan_attrs;
 
 	return 0;
 
+error_free_chan_attrs:
+	kfree(iio_dev_opaque->chan_attr_group.attrs);
+	iio_dev_opaque->chan_attr_group.attrs = NULL;
 error_clear_attrs:
 	iio_free_chan_devattr_list(&iio_dev_opaque->channel_attr_list);
 
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 5cd27f04b45e..b6c4bef2a7bb 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -226,6 +226,7 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
 	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
 		als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes,
 								    *(s64 *)raw_data);
+		ret = 0;
 		break;
 	default:
 		break;
diff --git a/drivers/iio/magnetometer/rm3100-core.c b/drivers/iio/magnetometer/rm3100-core.c
index 69938204456f..42b70cd42b39 100644
--- a/drivers/iio/magnetometer/rm3100-core.c
+++ b/drivers/iio/magnetometer/rm3100-core.c
@@ -530,6 +530,7 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
 	struct rm3100_data *data;
 	unsigned int tmp;
 	int ret;
+	int samp_rate_index;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
@@ -586,9 +587,14 @@ int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
 	ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp);
 	if (ret < 0)
 		return ret;
+
+	samp_rate_index = tmp - RM3100_TMRC_OFFSET;
+	if (samp_rate_index < 0 || samp_rate_index >=  RM3100_SAMP_NUM) {
+		dev_err(dev, "The value read from RM3100_REG_TMRC is invalid!\n");
+		return -EINVAL;
+	}
 	/* Initializing max wait time, which is double conversion time. */
-	data->conversion_time = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2]
-				* 2;
+	data->conversion_time = rm3100_samp_rates[samp_rate_index][2] * 2;
 
 	/* Cycle count values may not be what we want. */
 	if ((tmp - RM3100_TMRC_OFFSET) == 0)
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 433d6fac83c4..e8a5fed07e88 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -87,6 +87,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
 MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
 
 static const struct spi_device_id bmp280_spi_id[] = {
+	{ "bmp085", (kernel_ulong_t)&bmp180_chip_info },
 	{ "bmp180", (kernel_ulong_t)&bmp180_chip_info },
 	{ "bmp181", (kernel_ulong_t)&bmp180_chip_info },
 	{ "bmp280", (kernel_ulong_t)&bmp280_chip_info },
diff --git a/drivers/interconnect/qcom/sc8180x.c b/drivers/interconnect/qcom/sc8180x.c
index 20331e119beb..03d626776ba1 100644
--- a/drivers/interconnect/qcom/sc8180x.c
+++ b/drivers/interconnect/qcom/sc8180x.c
@@ -1372,6 +1372,7 @@ static struct qcom_icc_bcm bcm_mm0 = {
 
 static struct qcom_icc_bcm bcm_co0 = {
 	.name = "CO0",
+	.keepalive = true,
 	.num_nodes = 1,
 	.nodes = { &slv_qns_cdsp_mem_noc }
 };
diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c
index 629faa4c9aae..fc22cecf650f 100644
--- a/drivers/interconnect/qcom/sm8550.c
+++ b/drivers/interconnect/qcom/sm8550.c
@@ -2223,6 +2223,7 @@ static struct platform_driver qnoc_driver = {
 	.driver = {
 		.name = "qnoc-sm8550",
 		.of_match_table = qnoc_of_match,
+		.sync_state = icc_sync_state,
 	},
 };
 
diff --git a/drivers/interconnect/qcom/sm8650.c b/drivers/interconnect/qcom/sm8650.c
index b83de54577b6..b962e6c233ef 100644
--- a/drivers/interconnect/qcom/sm8650.c
+++ b/drivers/interconnect/qcom/sm8650.c
@@ -1160,7 +1160,7 @@ static struct qcom_icc_node qns_gemnoc_sf = {
 
 static struct qcom_icc_bcm bcm_acv = {
 	.name = "ACV",
-	.enable_mask = BIT(3),
+	.enable_mask = BIT(0),
 	.num_nodes = 1,
 	.nodes = { &ebi },
 };
diff --git a/drivers/interconnect/qcom/x1e80100.c b/drivers/interconnect/qcom/x1e80100.c
index d19501d913b3..cbaf4f9c41be 100644
--- a/drivers/interconnect/qcom/x1e80100.c
+++ b/drivers/interconnect/qcom/x1e80100.c
@@ -1586,6 +1586,7 @@ static struct qcom_icc_node qns_pcie_south_gem_noc_pcie = {
 
 static struct qcom_icc_bcm bcm_acv = {
 	.name = "ACV",
+	.enable_mask = BIT(3),
 	.num_nodes = 1,
 	.nodes = { &ebi },
 };
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 980123fb4dde..eb357ac2e54a 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -460,8 +460,9 @@ static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
 	list_for_each_entry(entry, &nvmem->cells, node) {
 		sysfs_bin_attr_init(&attrs[i]);
 		attrs[i].attr.name = devm_kasprintf(&nvmem->dev, GFP_KERNEL,
-						    "%s@%x", entry->name,
-						    entry->offset);
+						    "%s@%x,%x", entry->name,
+						    entry->offset,
+						    entry->bit_offset);
 		attrs[i].attr.mode = 0444;
 		attrs[i].size = entry->bytes;
 		attrs[i].read = &nvmem_cell_attr_read;
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index e748a5d04e97..9149d41fe65b 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -608,7 +608,7 @@ static void ad5933_work(struct work_struct *work)
 		struct ad5933_state, work.work);
 	struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
 	__be16 buf[2];
-	int val[2];
+	u16 val[2];
 	unsigned char status;
 	int ret;