Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's a little bit of everything in here: we've got various
  improvements and cleanups to drivers, some fixes across the board and
  a bit of new hardware support"

* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
  dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
  pwm: Add Renesas RZ/G2L MTU3a PWM driver
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  dt-bindings: pwm: restrict node name suffixes
  pwm: pca9685: Switch i2c driver back to use .probe()
  pwm: ab8500: Fix error code in probe()
  MAINTAINERS: add pwm to PolarFire SoC entry
  pwm: add microchip soft ip corePWM driver
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  pwm: meson: make full use of common clock framework
  pwm: meson: don't use hdmi/video clock as mux parent
  pwm: meson: switch to using struct clk_parent_data for mux parents
  pwm: meson: remove not needed check in meson_pwm_calc
  pwm: meson: fix handling of period/duty if greater than UINT_MAX
  pwm: meson: modify and simplify calculation in meson_pwm_get_state
  dt-bindings: pwm: Add R-Car V3U device tree bindings
  dt-bindings: pwm: imx: add i.MX8QXP compatible
  pwm: mediatek: Add support for MT7981
  dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
  ...

13 files changed, 1251 insertions, 141 deletions

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 8df861b1f4a3..6210babb0741 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -405,6 +405,16 @@ config PWM_MEDIATEK
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-mediatek.
 
+config PWM_MICROCHIP_CORE
+	tristate "Microchip corePWM PWM support"
+	depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  PWM driver for Microchip FPGA soft IP core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-microchip-core.
+
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
 	depends on ARCH_MXS || COMPILE_TEST
@@ -493,6 +503,17 @@ config PWM_ROCKCHIP
 	  Generic PWM framework driver for the PWM controller found on
 	  Rockchip SoCs.
 
+config PWM_RZ_MTU3
+	tristate "Renesas RZ/G2L MTU3a PWM Timer support"
+	depends on RZ_MTU3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the MTU3a PWM Timer controller found in Renesas
+	  RZ/G2L like chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-rz-mtu3.
+
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 19899b912e00..c822389c2a24 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
 obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MEDIATEK)	+= pwm-mediatek.o
+obj-$(CONFIG_PWM_MICROCHIP_CORE)	+= pwm-microchip-core.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_NTXEC)		+= pwm-ntxec.o
@@ -45,6 +46,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE)	+= pwm-raspberrypi-poe.o
 obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
+obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
 obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
index 507ff0d5f7bd..583a7d69c741 100644
--- a/drivers/pwm/pwm-ab8500.c
+++ b/drivers/pwm/pwm-ab8500.c
@@ -190,7 +190,7 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	int err;
 
 	if (pdev->id < 1 || pdev->id > 31)
-		return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+		return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
 
 	/*
 	 * Nothing to be done in probe, this is required to get the
diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c
index f1da99881adf..0ee4d2aee4df 100644
--- a/drivers/pwm/pwm-clk.c
+++ b/drivers/pwm/pwm-clk.c
@@ -89,7 +89,7 @@ static int pwm_clk_probe(struct platform_device *pdev)
 	if (!pcchip)
 		return -ENOMEM;
 
-	pcchip->clk = devm_clk_get(&pdev->dev, NULL);
+	pcchip->clk = devm_clk_get_prepared(&pdev->dev, NULL);
 	if (IS_ERR(pcchip->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(pcchip->clk),
 				     "Failed to get clock\n");
@@ -98,15 +98,9 @@ static int pwm_clk_probe(struct platform_device *pdev)
 	pcchip->chip.ops = &pwm_clk_ops;
 	pcchip->chip.npwm = 1;
 
-	ret = clk_prepare(pcchip->clk);
-	if (ret < 0)
-		return dev_err_probe(&pdev->dev, ret, "Failed to prepare clock\n");
-
 	ret = pwmchip_add(&pcchip->chip);
-	if (ret < 0) {
-		clk_unprepare(pcchip->clk);
+	if (ret < 0)
 		return dev_err_probe(&pdev->dev, ret, "Failed to add pwm chip\n");
-	}
 
 	platform_set_drvdata(pdev, pcchip);
 	return 0;
@@ -120,8 +114,6 @@ static void pwm_clk_remove(struct platform_device *pdev)
 
 	if (pcchip->clk_enabled)
 		clk_disable(pcchip->clk);
-
-	clk_unprepare(pcchip->clk);
 }
 
 static const struct of_device_id pwm_clk_dt_ids[] = {
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index 5e2b452ee5f2..98ab65c89685 100644
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -397,6 +397,13 @@ static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
 	if (tpm->enable_count > 0)
 		return -EBUSY;
 
+	/*
+	 * Force 'real_period' to be zero to force period update code
+	 * can be executed after system resume back, since suspend causes
+	 * the period related registers to become their reset values.
+	 */
+	tpm->real_period = 0;
+
 	clk_disable_unprepare(tpm->clk);
 
 	return 0;
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 5b5eeaff35da..7a51d210a877 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -38,6 +38,7 @@ struct pwm_mediatek_of_data {
 	unsigned int num_pwms;
 	bool pwm45_fixup;
 	bool has_ck_26m_sel;
+	const unsigned int *reg_offset;
 };
 
 /**
@@ -59,10 +60,14 @@ struct pwm_mediatek_chip {
 	const struct pwm_mediatek_of_data *soc;
 };
 
-static const unsigned int pwm_mediatek_reg_offset[] = {
+static const unsigned int mtk_pwm_reg_offset_v1[] = {
 	0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
 };
 
+static const unsigned int mtk_pwm_reg_offset_v2[] = {
+	0x0080, 0x00c0, 0x0100, 0x0140, 0x0180, 0x01c0, 0x0200, 0x0240
+};
+
 static inline struct pwm_mediatek_chip *
 to_pwm_mediatek_chip(struct pwm_chip *chip)
 {
@@ -111,7 +116,7 @@ static inline void pwm_mediatek_writel(struct pwm_mediatek_chip *chip,
 				       unsigned int num, unsigned int offset,
 				       u32 value)
 {
-	writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset);
+	writel(value, chip->regs + chip->soc->reg_offset[num] + offset);
 }
 
 static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -285,60 +290,77 @@ static const struct pwm_mediatek_of_data mt2712_pwm_data = {
 	.num_pwms = 8,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt6795_pwm_data = {
 	.num_pwms = 7,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7622_pwm_data = {
 	.num_pwms = 6,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7623_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = true,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7628_pwm_data = {
 	.num_pwms = 4,
 	.pwm45_fixup = true,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt7629_pwm_data = {
 	.num_pwms = 1,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = false,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
-static const struct pwm_mediatek_of_data mt8183_pwm_data = {
-	.num_pwms = 4,
+static const struct pwm_mediatek_of_data mt7981_pwm_data = {
+	.num_pwms = 3,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v2,
 };
 
-static const struct pwm_mediatek_of_data mt8365_pwm_data = {
-	.num_pwms = 3,
+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
+	.num_pwms = 2,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
-static const struct pwm_mediatek_of_data mt7986_pwm_data = {
-	.num_pwms = 2,
+static const struct pwm_mediatek_of_data mt8183_pwm_data = {
+	.num_pwms = 4,
+	.pwm45_fixup = false,
+	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
+};
+
+static const struct pwm_mediatek_of_data mt8365_pwm_data = {
+	.num_pwms = 3,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct pwm_mediatek_of_data mt8516_pwm_data = {
 	.num_pwms = 5,
 	.pwm45_fixup = false,
 	.has_ck_26m_sel = true,
+	.reg_offset = mtk_pwm_reg_offset_v1,
 };
 
 static const struct of_device_id pwm_mediatek_of_match[] = {
@@ -348,6 +370,7 @@ static const struct of_device_id pwm_mediatek_of_match[] = {
 	{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
 	{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
 	{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+	{ .compatible = "mediatek,mt7981-pwm", .data = &mt7981_pwm_data },
 	{ .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
 	{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
 	{ .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 5732300eb004..22f54db3ae8e 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -49,9 +49,9 @@
 #define PWM_HIGH_MASK		GENMASK(31, 16)
 
 #define REG_MISC_AB		0x8
-#define MISC_B_CLK_EN		BIT(23)
-#define MISC_A_CLK_EN		BIT(15)
-#define MISC_CLK_DIV_MASK	0x7f
+#define MISC_B_CLK_EN_SHIFT	23
+#define MISC_A_CLK_EN_SHIFT	15
+#define MISC_CLK_DIV_WIDTH	7
 #define MISC_B_CLK_DIV_SHIFT	16
 #define MISC_A_CLK_DIV_SHIFT	8
 #define MISC_B_CLK_SEL_SHIFT	6
@@ -61,37 +61,39 @@
 #define MISC_A_EN		BIT(0)
 
 #define MESON_NUM_PWMS		2
+#define MESON_MAX_MUX_PARENTS	4
 
 static struct meson_pwm_channel_data {
 	u8		reg_offset;
 	u8		clk_sel_shift;
 	u8		clk_div_shift;
-	u32		clk_en_mask;
+	u8		clk_en_shift;
 	u32		pwm_en_mask;
 } meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
 	{
 		.reg_offset	= REG_PWM_A,
 		.clk_sel_shift	= MISC_A_CLK_SEL_SHIFT,
 		.clk_div_shift	= MISC_A_CLK_DIV_SHIFT,
-		.clk_en_mask	= MISC_A_CLK_EN,
+		.clk_en_shift	= MISC_A_CLK_EN_SHIFT,
 		.pwm_en_mask	= MISC_A_EN,
 	},
 	{
 		.reg_offset	= REG_PWM_B,
 		.clk_sel_shift	= MISC_B_CLK_SEL_SHIFT,
 		.clk_div_shift	= MISC_B_CLK_DIV_SHIFT,
-		.clk_en_mask	= MISC_B_CLK_EN,
+		.clk_en_shift	= MISC_B_CLK_EN_SHIFT,
 		.pwm_en_mask	= MISC_B_EN,
 	}
 };
 
 struct meson_pwm_channel {
+	unsigned long rate;
 	unsigned int hi;
 	unsigned int lo;
-	u8 pre_div;
 
-	struct clk *clk_parent;
 	struct clk_mux mux;
+	struct clk_divider div;
+	struct clk_gate gate;
 	struct clk *clk;
 };
 
@@ -124,16 +126,6 @@ static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct device *dev = chip->dev;
 	int err;
 
-	if (channel->clk_parent) {
-		err = clk_set_parent(channel->clk, channel->clk_parent);
-		if (err < 0) {
-			dev_err(dev, "failed to set parent %s for %s: %d\n",
-				__clk_get_name(channel->clk_parent),
-				__clk_get_name(channel->clk), err);
-			return err;
-		}
-	}
-
 	err = clk_prepare_enable(channel->clk);
 	if (err < 0) {
 		dev_err(dev, "failed to enable clock %s: %d\n",
@@ -156,8 +148,9 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 			  const struct pwm_state *state)
 {
 	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
-	unsigned int duty, period, pre_div, cnt, duty_cnt;
+	unsigned int cnt, duty_cnt;
 	unsigned long fin_freq;
+	u64 duty, period, freq;
 
 	duty = state->duty_cycle;
 	period = state->period;
@@ -171,7 +164,11 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 	if (state->polarity == PWM_POLARITY_INVERSED)
 		duty = period - duty;
 
-	fin_freq = clk_get_rate(channel->clk);
+	freq = div64_u64(NSEC_PER_SEC * 0xffffULL, period);
+	if (freq > ULONG_MAX)
+		freq = ULONG_MAX;
+
+	fin_freq = clk_round_rate(channel->clk, freq);
 	if (fin_freq == 0) {
 		dev_err(meson->chip.dev, "invalid source clock frequency\n");
 		return -EINVAL;
@@ -179,46 +176,31 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
 
 	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
 
-	pre_div = div64_u64(fin_freq * (u64)period, NSEC_PER_SEC * 0xffffLL);
-	if (pre_div > MISC_CLK_DIV_MASK) {
-		dev_err(meson->chip.dev, "unable to get period pre_div\n");
-		return -EINVAL;
-	}
-
-	cnt = div64_u64(fin_freq * (u64)period, NSEC_PER_SEC * (pre_div + 1));
+	cnt = div_u64(fin_freq * period, NSEC_PER_SEC);
 	if (cnt > 0xffff) {
 		dev_err(meson->chip.dev, "unable to get period cnt\n");
 		return -EINVAL;
 	}
 
-	dev_dbg(meson->chip.dev, "period=%u pre_div=%u cnt=%u\n", period,
-		pre_div, cnt);
+	dev_dbg(meson->chip.dev, "period=%llu cnt=%u\n", period, cnt);
 
 	if (duty == period) {
-		channel->pre_div = pre_div;
 		channel->hi = cnt;
 		channel->lo = 0;
 	} else if (duty == 0) {
-		channel->pre_div = pre_div;
 		channel->hi = 0;
 		channel->lo = cnt;
 	} else {
-		/* Then check is we can have the duty with the same pre_div */
-		duty_cnt = div64_u64(fin_freq * (u64)duty,
-				     NSEC_PER_SEC * (pre_div + 1));
-		if (duty_cnt > 0xffff) {
-			dev_err(meson->chip.dev, "unable to get duty cycle\n");
-			return -EINVAL;
-		}
+		duty_cnt = div_u64(fin_freq * duty, NSEC_PER_SEC);
 
-		dev_dbg(meson->chip.dev, "duty=%u pre_div=%u duty_cnt=%u\n",
-			duty, pre_div, duty_cnt);
+		dev_dbg(meson->chip.dev, "duty=%llu duty_cnt=%u\n", duty, duty_cnt);
 
-		channel->pre_div = pre_div;
 		channel->hi = duty_cnt;
 		channel->lo = cnt - duty_cnt;
 	}
 
+	channel->rate = fin_freq;
+
 	return 0;
 }
 
@@ -228,16 +210,15 @@ static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
 	struct meson_pwm_channel_data *channel_data;
 	unsigned long flags;
 	u32 value;
+	int err;
 
 	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
 
-	spin_lock_irqsave(&meson->lock, flags);
+	err = clk_set_rate(channel->clk, channel->rate);
+	if (err)
+		dev_err(meson->chip.dev, "setting clock rate failed\n");
 
-	value = readl(meson->base + REG_MISC_AB);
-	value &= ~(MISC_CLK_DIV_MASK << channel_data->clk_div_shift);
-	value |= channel->pre_div << channel_data->clk_div_shift;
-	value |= channel_data->clk_en_mask;
-	writel(value, meson->base + REG_MISC_AB);
+	spin_lock_irqsave(&meson->lock, flags);
 
 	value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
 		FIELD_PREP(PWM_LOW_MASK, channel->lo);
@@ -276,16 +257,16 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			/*
 			 * This IP block revision doesn't have an "always high"
 			 * setting which we can use for "inverted disabled".
-			 * Instead we achieve this using the same settings
-			 * that we use a pre_div of 0 (to get the shortest
-			 * possible duration for one "count") and
-			 * "period == duty_cycle". This results in a signal
+			 * Instead we achieve this by setting mux parent with
+			 * highest rate and minimum divider value, resulting
+			 * in the shortest possible duration for one "count"
+			 * and "period == duty_cycle". This results in a signal
 			 * which is LOW for one "count", while being HIGH for
 			 * the rest of the (so the signal is HIGH for slightly
 			 * less than 100% of the period, but this is the best
 			 * we can achieve).
 			 */
-			channel->pre_div = 0;
+			channel->rate = ULONG_MAX;
 			channel->hi = ~0;
 			channel->lo = 0;
 
@@ -304,13 +285,12 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
-static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip,
-					struct pwm_device *pwm, u32 cnt)
+static u64 meson_pwm_cnt_to_ns(struct pwm_chip *chip, struct pwm_device *pwm,
+			       u32 cnt)
 {
 	struct meson_pwm *meson = to_meson_pwm(chip);
 	struct meson_pwm_channel *channel;
 	unsigned long fin_freq;
-	u32 fin_ns;
 
 	/* to_meson_pwm() can only be used after .get_state() is called */
 	channel = &meson->channels[pwm->hwpwm];
@@ -319,9 +299,7 @@ static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip,
 	if (fin_freq == 0)
 		return 0;
 
-	fin_ns = div_u64(NSEC_PER_SEC, fin_freq);
-
-	return cnt * fin_ns * (channel->pre_div + 1);
+	return div64_ul(NSEC_PER_SEC * (u64)cnt, fin_freq);
 }
 
 static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -330,7 +308,7 @@ static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct meson_pwm *meson = to_meson_pwm(chip);
 	struct meson_pwm_channel_data *channel_data;
 	struct meson_pwm_channel *channel;
-	u32 value, tmp;
+	u32 value;
 
 	if (!state)
 		return 0;
@@ -339,30 +317,14 @@ static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
 
 	value = readl(meson->base + REG_MISC_AB);
-
-	tmp = channel_data->pwm_en_mask | channel_data->clk_en_mask;
-	state->enabled = (value & tmp) == tmp;
-
-	tmp = value >> channel_data->clk_div_shift;
-	channel->pre_div = FIELD_GET(MISC_CLK_DIV_MASK, tmp);
+	state->enabled = value & channel_data->pwm_en_mask;
 
 	value = readl(meson->base + channel_data->reg_offset);
-
 	channel->lo = FIELD_GET(PWM_LOW_MASK, value);
 	channel->hi = FIELD_GET(PWM_HIGH_MASK, value);
 
-	if (channel->lo == 0) {
-		state->period = meson_pwm_cnt_to_ns(chip, pwm, channel->hi);
-		state->duty_cycle = state->period;
-	} else if (channel->lo >= channel->hi) {
-		state->period = meson_pwm_cnt_to_ns(chip, pwm,
-						    channel->lo + channel->hi);
-		state->duty_cycle = meson_pwm_cnt_to_ns(chip, pwm,
-							channel->hi);
-	} else {
-		state->period = 0;
-		state->duty_cycle = 0;
-	}
+	state->period = meson_pwm_cnt_to_ns(chip, pwm, channel->lo + channel->hi);
+	state->duty_cycle = meson_pwm_cnt_to_ns(chip, pwm, channel->hi);
 
 	state->polarity = PWM_POLARITY_NORMAL;
 
@@ -378,7 +340,7 @@ static const struct pwm_ops meson_pwm_ops = {
 };
 
 static const char * const pwm_meson8b_parent_names[] = {
-	"xtal", "vid_pll", "fclk_div4", "fclk_div3"
+	"xtal", NULL, "fclk_div4", "fclk_div3"
 };
 
 static const struct meson_pwm_data pwm_meson8b_data = {
@@ -386,15 +348,6 @@ static const struct meson_pwm_data pwm_meson8b_data = {
 	.num_parents = ARRAY_SIZE(pwm_meson8b_parent_names),
 };
 
-static const char * const pwm_gxbb_parent_names[] = {
-	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_gxbb_data = {
-	.parent_names = pwm_gxbb_parent_names,
-	.num_parents = ARRAY_SIZE(pwm_gxbb_parent_names),
-};
-
 /*
  * Only the 2 first inputs of the GXBB AO PWMs are valid
  * The last 2 are grounded
@@ -444,15 +397,6 @@ static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
 	.num_parents = ARRAY_SIZE(pwm_g12a_ao_cd_parent_names),
 };
 
-static const char * const pwm_g12a_ee_parent_names[] = {
-	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
-};
-
-static const struct meson_pwm_data pwm_g12a_ee_data = {
-	.parent_names = pwm_g12a_ee_parent_names,
-	.num_parents = ARRAY_SIZE(pwm_g12a_ee_parent_names),
-};
-
 static const struct of_device_id meson_pwm_matches[] = {
 	{
 		.compatible = "amlogic,meson8b-pwm",
@@ -460,7 +404,7 @@ static const struct of_device_id meson_pwm_matches[] = {
 	},
 	{
 		.compatible = "amlogic,meson-gxbb-pwm",
-		.data = &pwm_gxbb_data
+		.data = &pwm_meson8b_data
 	},
 	{
 		.compatible = "amlogic,meson-gxbb-ao-pwm",
@@ -476,7 +420,7 @@ static const struct of_device_id meson_pwm_matches[] = {
 	},
 	{
 		.compatible = "amlogic,meson-g12a-ee-pwm",
-		.data = &pwm_g12a_ee_data
+		.data = &pwm_meson8b_data
 	},
 	{
 		.compatible = "amlogic,meson-g12a-ao-pwm-ab",
@@ -492,21 +436,28 @@ MODULE_DEVICE_TABLE(of, meson_pwm_matches);
 
 static int meson_pwm_init_channels(struct meson_pwm *meson)
 {
+	struct clk_parent_data mux_parent_data[MESON_MAX_MUX_PARENTS] = {};
 	struct device *dev = meson->chip.dev;
-	struct clk_init_data init;
 	unsigned int i;
 	char name[255];
 	int err;
 
+	for (i = 0; i < meson->data->num_parents; i++) {
+		mux_parent_data[i].index = -1;
+		mux_parent_data[i].name = meson->data->parent_names[i];
+	}
+
 	for (i = 0; i < meson->chip.npwm; i++) {
 		struct meson_pwm_channel *channel = &meson->channels[i];
+		struct clk_parent_data div_parent = {}, gate_parent = {};
+		struct clk_init_data init = {};
 
 		snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
 
 		init.name = name;
 		init.ops = &clk_mux_ops;
 		init.flags = 0;
-		init.parent_names = meson->data->parent_names;
+		init.parent_data = mux_parent_data;
 		init.num_parents = meson->data->num_parents;
 
 		channel->mux.reg = meson->base + REG_MISC_AB;
@@ -518,18 +469,63 @@ static int meson_pwm_init_channels(struct meson_pwm *meson)
 		channel->mux.table = NULL;
 		channel->mux.hw.init = &init;
 
-		channel->clk = devm_clk_register(dev, &channel->mux.hw);
-		if (IS_ERR(channel->clk)) {
-			err = PTR_ERR(channel->clk);
+		err = devm_clk_hw_register(dev, &channel->mux.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "%s#div%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_divider_ops;
+		init.flags = CLK_SET_RATE_PARENT;
+		div_parent.index = -1;
+		div_parent.hw = &channel->mux.hw;
+		init.parent_data = &div_parent;
+		init.num_parents = 1;
+
+		channel->div.reg = meson->base + REG_MISC_AB;
+		channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
+		channel->div.width = MISC_CLK_DIV_WIDTH;
+		channel->div.hw.init = &init;
+		channel->div.flags = 0;
+		channel->div.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->div.hw);
+		if (err) {
 			dev_err(dev, "failed to register %s: %d\n", name, err);
 			return err;
 		}
 
-		snprintf(name, sizeof(name), "clkin%u", i);
+		snprintf(name, sizeof(name), "%s#gate%u", dev_name(dev), i);
 
-		channel->clk_parent = devm_clk_get_optional(dev, name);
-		if (IS_ERR(channel->clk_parent))
-			return PTR_ERR(channel->clk_parent);
+		init.name = name;
+		init.ops = &clk_gate_ops;
+		init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+		gate_parent.index = -1;
+		gate_parent.hw = &channel->div.hw;
+		init.parent_data = &gate_parent;
+		init.num_parents = 1;
+
+		channel->gate.reg = meson->base + REG_MISC_AB;
+		channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+		channel->gate.hw.init = &init;
+		channel->gate.flags = 0;
+		channel->gate.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->gate.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
 	}
 
 	return 0;
diff --git a/drivers/pwm/pwm-microchip-core.c b/drivers/pwm/pwm-microchip-core.c
new file mode 100644
index 000000000000..8750b57684a9
--- /dev/null
+++ b/drivers/pwm/pwm-microchip-core.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * corePWM driver for Microchip "soft" FPGA IP cores.
+ *
+ * Copyright (c) 2021-2023 Microchip Corporation. All rights reserved.
+ * Author: Conor Dooley <conor.dooley@microchip.com>
+ * Documentation:
+ * https://www.microsemi.com/document-portal/doc_download/1245275-corepwm-hb
+ *
+ * Limitations:
+ * - If the IP block is configured without "shadow registers", all register
+ *   writes will take effect immediately, causing glitches on the output.
+ *   If shadow registers *are* enabled, setting the "SYNC_UPDATE" register
+ *   notifies the core that it needs to update the registers defining the
+ *   waveform from the contents of the "shadow registers". Otherwise, changes
+ *   will take effective immediately, even for those channels.
+ *   As setting the period/duty cycle takes 4 register writes, there is a window
+ *   in which this races against the start of a new period.
+ * - The IP block has no concept of a duty cycle, only rising/falling edges of
+ *   the waveform. Unfortunately, if the rising & falling edges registers have
+ *   the same value written to them the IP block will do whichever of a rising
+ *   or a falling edge is possible. I.E. a 50% waveform at twice the requested
+ *   period. Therefore to get a 0% waveform, the output is set the max high/low
+ *   time depending on polarity.
+ *   If the duty cycle is 0%, and the requested period is less than the
+ *   available period resolution, this will manifest as a ~100% waveform (with
+ *   some output glitches) rather than 50%.
+ * - The PWM period is set for the whole IP block not per channel. The driver
+ *   will only change the period if no other PWM output is enabled.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ktime.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define MCHPCOREPWM_PRESCALE_MAX	0xff
+#define MCHPCOREPWM_PERIOD_STEPS_MAX	0xfe
+#define MCHPCOREPWM_PERIOD_MAX		0xff00
+
+#define MCHPCOREPWM_PRESCALE	0x00
+#define MCHPCOREPWM_PERIOD	0x04
+#define MCHPCOREPWM_EN(i)	(0x08 + 0x04 * (i)) /* 0x08, 0x0c */
+#define MCHPCOREPWM_POSEDGE(i)	(0x10 + 0x08 * (i)) /* 0x10, 0x18, ..., 0x88 */
+#define MCHPCOREPWM_NEGEDGE(i)	(0x14 + 0x08 * (i)) /* 0x14, 0x1c, ..., 0x8c */
+#define MCHPCOREPWM_SYNC_UPD	0xe4
+#define MCHPCOREPWM_TIMEOUT_MS	100u
+
+struct mchp_core_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	void __iomem *base;
+	struct mutex lock; /* protects the shared period */
+	ktime_t update_timestamp;
+	u32 sync_update_mask;
+	u16 channel_enabled;
+};
+
+static inline struct mchp_core_pwm_chip *to_mchp_core_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct mchp_core_pwm_chip, chip);
+}
+
+static void mchp_core_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
+				 bool enable, u64 period)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip);
+	u8 channel_enable, reg_offset, shift;
+
+	/*
+	 * There are two adjacent 8 bit control regs, the lower reg controls
+	 * 0-7 and the upper reg 8-15. Check if the pwm is in the upper reg
+	 * and if so, offset by the bus width.
+	 */
+	reg_offset = MCHPCOREPWM_EN(pwm->hwpwm >> 3);
+	shift = pwm->hwpwm & 7;
+
+	channel_enable = readb_relaxed(mchp_core_pwm->base + reg_offset);
+	channel_enable &= ~(1 << shift);
+	channel_enable |= (enable << shift);
+
+	writel_relaxed(channel_enable, mchp_core_pwm->base + reg_offset);
+	mchp_core_pwm->channel_enabled &= ~BIT(pwm->hwpwm);
+	mchp_core_pwm->channel_enabled |= enable << pwm->hwpwm;
+
+	/*
+	 * The updated values will not appear on the bus until they have been
+	 * applied to the waveform at the beginning of the next period.
+	 * This is a NO-OP if the channel does not have shadow registers.
+	 */
+	if (mchp_core_pwm->sync_update_mask & (1 << pwm->hwpwm))
+		mchp_core_pwm->update_timestamp = ktime_add_ns(ktime_get(), period);
+}
+
+static void mchp_core_pwm_wait_for_sync_update(struct mchp_core_pwm_chip *mchp_core_pwm,
+					       unsigned int channel)
+{
+	/*
+	 * If a shadow register is used for this PWM channel, and iff there is
+	 * a pending update to the waveform, we must wait for it to be applied
+	 * before attempting to read its state. Reading the registers yields
+	 * the currently implemented settings & the new ones are only readable
+	 * once the current period has ended.
+	 */
+
+	if (mchp_core_pwm->sync_update_mask & (1 << channel)) {
+		ktime_t current_time = ktime_get();
+		s64 remaining_ns;
+		u32 delay_us;
+
+		remaining_ns = ktime_to_ns(ktime_sub(mchp_core_pwm->update_timestamp,
+						     current_time));
+
+		/*
+		 * If the update has gone through, don't bother waiting for
+		 * obvious reasons. Otherwise wait around for an appropriate
+		 * amount of time for the update to go through.
+		 */
+		if (remaining_ns <= 0)
+			return;
+
+		delay_us = DIV_ROUND_UP_ULL(remaining_ns, NSEC_PER_USEC);
+		fsleep(delay_us);
+	}
+}
+
+static u64 mchp_core_pwm_calc_duty(const struct pwm_state *state, u64 clk_rate,
+				   u8 prescale, u8 period_steps)
+{
+	u64 duty_steps, tmp;
+
+	/*
+	 * Calculate the duty cycle in multiples of the prescaled period:
+	 * duty_steps = duty_in_ns / step_in_ns
+	 * step_in_ns = (prescale * NSEC_PER_SEC) / clk_rate
+	 * The code below is rearranged slightly to only divide once.
+	 */
+	tmp = (((u64)prescale) + 1) * NSEC_PER_SEC;
+	duty_steps = mul_u64_u64_div_u64(state->duty_cycle, clk_rate, tmp);
+
+	return duty_steps;
+}
+
+static void mchp_core_pwm_apply_duty(struct pwm_chip *chip, struct pwm_device *pwm,
+				     const struct pwm_state *state, u64 duty_steps,
+				     u16 period_steps)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip);
+	u8 posedge, negedge;
+	u8 first_edge = 0, second_edge = duty_steps;
+
+	/*
+	 * Setting posedge == negedge doesn't yield a constant output,
+	 * so that's an unsuitable setting to model duty_steps = 0.
+	 * In that case set the unwanted edge to a value that never
+	 * triggers.
+	 */
+	if (duty_steps == 0)
+		first_edge = period_steps + 1;
+
+	if (state->polarity == PWM_POLARITY_INVERSED) {
+		negedge = first_edge;
+		posedge = second_edge;
+	} else {
+		posedge = first_edge;
+		negedge = second_edge;
+	}
+
+	/*
+	 * Set the sync bit which ensures that periods that already started are
+	 * completed unaltered. At each counter reset event the values are
+	 * updated from the shadow registers.
+	 */
+	writel_relaxed(posedge, mchp_core_pwm->base + MCHPCOREPWM_POSEDGE(pwm->hwpwm));
+	writel_relaxed(negedge, mchp_core_pwm->base + MCHPCOREPWM_NEGEDGE(pwm->hwpwm));
+}
+
+static int mchp_core_pwm_calc_period(const struct pwm_state *state, unsigned long clk_rate,
+				     u16 *prescale, u16 *period_steps)
+{
+	u64 tmp;
+
+	/*
+	 * Calculate the period cycles and prescale values.
+	 * The registers are each 8 bits wide & multiplied to compute the period
+	 * using the formula:
+	 *           (prescale + 1) * (period_steps + 1)
+	 * period = -------------------------------------
+	 *                      clk_rate
+	 * so the maximum period that can be generated is 0x10000 times the
+	 * period of the input clock.
+	 * However, due to the design of the "hardware", it is not possible to
+	 * attain a 100% duty cycle if the full range of period_steps is used.
+	 * Therefore period_steps is restricted to 0xfe and the maximum multiple
+	 * of the clock period attainable is (0xff + 1) * (0xfe + 1) = 0xff00
+	 *
+	 * The prescale and period_steps registers operate similarly to
+	 * CLK_DIVIDER_ONE_BASED, where the value used by the hardware is that
+	 * in the register plus one.
+	 * It's therefore not possible to set a period lower than 1/clk_rate, so
+	 * if tmp is 0, abort. Without aborting, we will set a period that is
+	 * greater than that requested and, more importantly, will trigger the
+	 * neg-/pos-edge issue described in the limitations.
+	 */
+	tmp = mul_u64_u64_div_u64(state->period, clk_rate, NSEC_PER_SEC);
+	if (tmp >= MCHPCOREPWM_PERIOD_MAX) {
+		*prescale = MCHPCOREPWM_PRESCALE_MAX;
+		*period_steps = MCHPCOREPWM_PERIOD_STEPS_MAX;
+
+		return 0;
+	}
+
+	/*
+	 * There are multiple strategies that could be used to choose the
+	 * prescale & period_steps values.
+	 * Here the idea is to pick values so that the selection of duty cycles
+	 * is as finegrain as possible, while also keeping the period less than
+	 * that requested.
+	 *
+	 * A simple way to satisfy the first condition is to always set
+	 * period_steps to its maximum value. This neatly also satisfies the
+	 * second condition too, since using the maximum value of period_steps
+	 * to calculate prescale actually calculates its upper bound.
+	 * Integer division will ensure a round down, so the period will thereby
+	 * always be less than that requested.
+	 *
+	 * The downside of this approach is a significant degree of inaccuracy,
+	 * especially as tmp approaches integer multiples of
+	 * MCHPCOREPWM_PERIOD_STEPS_MAX.
+	 *
+	 * As we must produce a period less than that requested, and for the
+	 * sake of creating a simple algorithm, disallow small values of tmp
+	 * that would need special handling.
+	 */
+	if (tmp < MCHPCOREPWM_PERIOD_STEPS_MAX + 1)
+		return -EINVAL;
+
+	/*
+	 * This "optimal" value for prescale is be calculated using the maximum
+	 * permitted value of period_steps, 0xfe.
+	 *
+	 *                period * clk_rate
+	 * prescale = ------------------------- - 1
+	 *            NSEC_PER_SEC * (0xfe + 1)
+	 *
+	 *
+	 *  period * clk_rate
+	 * ------------------- was precomputed as `tmp`
+	 *    NSEC_PER_SEC
+	 */
+	*prescale = ((u16)tmp) / (MCHPCOREPWM_PERIOD_STEPS_MAX + 1) - 1;
+
+	/*
+	 * period_steps can be computed from prescale:
+	 *                      period * clk_rate
+	 * period_steps = ----------------------------- - 1
+	 *                NSEC_PER_SEC * (prescale + 1)
+	 *
+	 * However, in this approximation, we simply use the maximum value that
+	 * was used to compute prescale.
+	 */
+	*period_steps = MCHPCOREPWM_PERIOD_STEPS_MAX;
+
+	return 0;
+}
+
+static int mchp_core_pwm_apply_locked(struct pwm_chip *chip, struct pwm_device *pwm,
+				      const struct pwm_state *state)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip);
+	bool period_locked;
+	unsigned long clk_rate;
+	u64 duty_steps;
+	u16 prescale, period_steps;
+	int ret;
+
+	if (!state->enabled) {
+		mchp_core_pwm_enable(chip, pwm, false, pwm->state.period);
+		return 0;
+	}
+
+	/*
+	 * If clk_rate is too big, the following multiplication might overflow.
+	 * However this is implausible, as the fabric of current FPGAs cannot
+	 * provide clocks at a rate high enough.
+	 */
+	clk_rate = clk_get_rate(mchp_core_pwm->clk);
+	if (clk_rate >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	ret = mchp_core_pwm_calc_period(state, clk_rate, &prescale, &period_steps);
+	if (ret)
+		return ret;
+
+	/*
+	 * If the only thing that has changed is the duty cycle or the polarity,
+	 * we can shortcut the calculations and just compute/apply the new duty
+	 * cycle pos & neg edges
+	 * As all the channels share the same period, do not allow it to be
+	 * changed if any other channels are enabled.
+	 * If the period is locked, it may not be possible to use a period
+	 * less than that requested. In that case, we just abort.
+	 */
+	period_locked = mchp_core_pwm->channel_enabled & ~(1 << pwm->hwpwm);
+
+	if (period_locked) {
+		u16 hw_prescale;
+		u16 hw_period_steps;
+
+		hw_prescale = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PRESCALE);
+		hw_period_steps = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PERIOD);
+
+		if ((period_steps + 1) * (prescale + 1) <
+		    (hw_period_steps + 1) * (hw_prescale + 1))
+			return -EINVAL;
+
+		/*
+		 * It is possible that something could have set the period_steps
+		 * register to 0xff, which would prevent us from setting a 100%
+		 * or 0% relative duty cycle, as explained above in
+		 * mchp_core_pwm_calc_period().
+		 * The period is locked and we cannot change this, so we abort.
+		 */
+		if (hw_period_steps == MCHPCOREPWM_PERIOD_STEPS_MAX)
+			return -EINVAL;
+
+		prescale = hw_prescale;
+		period_steps = hw_period_steps;
+	}
+
+	duty_steps = mchp_core_pwm_calc_duty(state, clk_rate, prescale, period_steps);
+
+	/*
+	 * Because the period is not per channel, it is possible that the
+	 * requested duty cycle is longer than the period, in which case cap it
+	 * to the period, IOW a 100% duty cycle.
+	 */
+	if (duty_steps > period_steps)
+		duty_steps = period_steps + 1;
+
+	if (!period_locked) {
+		writel_relaxed(prescale, mchp_core_pwm->base + MCHPCOREPWM_PRESCALE);
+		writel_relaxed(period_steps, mchp_core_pwm->base + MCHPCOREPWM_PERIOD);
+	}
+
+	mchp_core_pwm_apply_duty(chip, pwm, state, duty_steps, period_steps);
+
+	mchp_core_pwm_enable(chip, pwm, true, pwm->state.period);
+
+	return 0;
+}
+
+static int mchp_core_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			       const struct pwm_state *state)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip);
+	int ret;
+
+	mutex_lock(&mchp_core_pwm->lock);
+
+	mchp_core_pwm_wait_for_sync_update(mchp_core_pwm, pwm->hwpwm);
+
+	ret = mchp_core_pwm_apply_locked(chip, pwm, state);
+
+	mutex_unlock(&mchp_core_pwm->lock);
+
+	return ret;
+}
+
+static int mchp_core_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				   struct pwm_state *state)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm = to_mchp_core_pwm(chip);
+	u64 rate;
+	u16 prescale, period_steps;
+	u8 duty_steps, posedge, negedge;
+
+	mutex_lock(&mchp_core_pwm->lock);
+
+	mchp_core_pwm_wait_for_sync_update(mchp_core_pwm, pwm->hwpwm);
+
+	if (mchp_core_pwm->channel_enabled & (1 << pwm->hwpwm))
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	rate = clk_get_rate(mchp_core_pwm->clk);
+
+	/*
+	 * Calculating the period:
+	 * The registers are each 8 bits wide & multiplied to compute the period
+	 * using the formula:
+	 *           (prescale + 1) * (period_steps + 1)
+	 * period = -------------------------------------
+	 *                      clk_rate
+	 *
+	 * Note:
+	 * The prescale and period_steps registers operate similarly to
+	 * CLK_DIVIDER_ONE_BASED, where the value used by the hardware is that
+	 * in the register plus one.
+	 */
+	prescale = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PRESCALE);
+	period_steps = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_PERIOD);
+
+	state->period = (period_steps + 1) * (prescale + 1);
+	state->period *= NSEC_PER_SEC;
+	state->period = DIV64_U64_ROUND_UP(state->period, rate);
+
+	posedge = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_POSEDGE(pwm->hwpwm));
+	negedge = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_NEGEDGE(pwm->hwpwm));
+
+	mutex_unlock(&mchp_core_pwm->lock);
+
+	if (negedge == posedge) {
+		state->duty_cycle = state->period;
+		state->period *= 2;
+	} else {
+		duty_steps = abs((s16)posedge - (s16)negedge);
+		state->duty_cycle = duty_steps * (prescale + 1) * NSEC_PER_SEC;
+		state->duty_cycle = DIV64_U64_ROUND_UP(state->duty_cycle, rate);
+	}
+
+	state->polarity = negedge < posedge ? PWM_POLARITY_INVERSED : PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static const struct pwm_ops mchp_core_pwm_ops = {
+	.apply = mchp_core_pwm_apply,
+	.get_state = mchp_core_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id mchp_core_of_match[] = {
+	{
+		.compatible = "microchip,corepwm-rtl-v4",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mchp_core_of_match);
+
+static int mchp_core_pwm_probe(struct platform_device *pdev)
+{
+	struct mchp_core_pwm_chip *mchp_core_pwm;
+	struct resource *regs;
+	int ret;
+
+	mchp_core_pwm = devm_kzalloc(&pdev->dev, sizeof(*mchp_core_pwm), GFP_KERNEL);
+	if (!mchp_core_pwm)
+		return -ENOMEM;
+
+	mchp_core_pwm->base = devm_platform_get_and_ioremap_resource(pdev, 0, &regs);
+	if (IS_ERR(mchp_core_pwm->base))
+		return PTR_ERR(mchp_core_pwm->base);
+
+	mchp_core_pwm->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(mchp_core_pwm->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mchp_core_pwm->clk),
+				     "failed to get PWM clock\n");
+
+	if (of_property_read_u32(pdev->dev.of_node, "microchip,sync-update-mask",
+				 &mchp_core_pwm->sync_update_mask))
+		mchp_core_pwm->sync_update_mask = 0;
+
+	mutex_init(&mchp_core_pwm->lock);
+
+	mchp_core_pwm->chip.dev = &pdev->dev;
+	mchp_core_pwm->chip.ops = &mchp_core_pwm_ops;
+	mchp_core_pwm->chip.npwm = 16;
+
+	mchp_core_pwm->channel_enabled = readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_EN(0));
+	mchp_core_pwm->channel_enabled |=
+		readb_relaxed(mchp_core_pwm->base + MCHPCOREPWM_EN(1)) << 8;
+
+	/*
+	 * Enable synchronous update mode for all channels for which shadow
+	 * registers have been synthesised.
+	 */
+	writel_relaxed(1U, mchp_core_pwm->base + MCHPCOREPWM_SYNC_UPD);
+	mchp_core_pwm->update_timestamp = ktime_get();
+
+	ret = devm_pwmchip_add(&pdev->dev, &mchp_core_pwm->chip);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to add pwmchip\n");
+
+	return 0;
+}
+
+static struct platform_driver mchp_core_pwm_driver = {
+	.driver = {
+		.name = "mchp-core-pwm",
+		.of_match_table = mchp_core_of_match,
+	},
+	.probe = mchp_core_pwm_probe,
+};
+module_platform_driver(mchp_core_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("corePWM driver for Microchip FPGAs");
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 79e321e96f56..2401b6733241 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -79,14 +79,11 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
 
-	if (!state->enabled) {
-		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-					 0x0);
-
-		if (mdp->enabled) {
-			clk_disable_unprepare(mdp->clk_mm);
-			clk_disable_unprepare(mdp->clk_main);
-		}
+	if (!state->enabled && mdp->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+					 mdp->data->enable_mask, 0x0);
+		clk_disable_unprepare(mdp->clk_mm);
+		clk_disable_unprepare(mdp->clk_main);
 
 		mdp->enabled = false;
 		return 0;
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 3ed5a48ca581..3038a68412a7 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -665,7 +665,7 @@ static struct i2c_driver pca9685_i2c_driver = {
 		.of_match_table = of_match_ptr(pca9685_dt_ids),
 		.pm = &pca9685_pwm_pm,
 	},
-	.probe_new = pca9685_pwm_probe,
+	.probe = pca9685_pwm_probe,
 	.remove = pca9685_pwm_remove,
 	.id_table = pca9685_id,
 };
diff --git a/drivers/pwm/pwm-rz-mtu3.c b/drivers/pwm/pwm-rz-mtu3.c
new file mode 100644
index 000000000000..bed8bd671e37
--- /dev/null
+++ b/drivers/pwm/pwm-rz-mtu3.c
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L MTU3a PWM Timer driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Hardware manual for this IP can be found here
+ * https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en
+ *
+ * Limitations:
+ * - When PWM is disabled, the output is driven to Hi-Z.
+ * - While the hardware supports both polarities, the driver (for now)
+ *   only handles normal polarity.
+ * - HW uses one counter and two match components to configure duty_cycle
+ *   and period.
+ * - Multi-Function Timer Pulse Unit (a.k.a MTU) has 7 HW channels for PWM
+ *   operations. (The channels are MTU{0..4, 6, 7}.)
+ * - MTU{1, 2} channels have a single IO, whereas all other HW channels have
+ *   2 IOs.
+ * - Each IO is modelled as an independent PWM channel.
+ * - rz_mtu3_channel_io_map table is used to map the PWM channel to the
+ *   corresponding HW channel as there are difference in number of IOs
+ *   between HW channels.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/limits.h>
+#include <linux/mfd/rz-mtu3.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/time.h>
+
+#define RZ_MTU3_MAX_PWM_CHANNELS	12
+#define RZ_MTU3_MAX_HW_CHANNELS		7
+
+/**
+ * struct rz_mtu3_channel_io_map - MTU3 pwm channel map
+ *
+ * @base_pwm_number: First PWM of a channel
+ * @num: number of IOs on the HW channel.
+ */
+struct rz_mtu3_channel_io_map {
+	u8 base_pwm_number;
+	u8 num_channel_ios;
+};
+
+/**
+ * struct rz_mtu3_pwm_channel - MTU3 pwm channel data
+ *
+ * @mtu: MTU3 channel data
+ * @map: MTU3 pwm channel map
+ */
+struct rz_mtu3_pwm_channel {
+	struct rz_mtu3_channel *mtu;
+	const struct rz_mtu3_channel_io_map *map;
+};
+
+/**
+ * struct rz_mtu3_pwm_chip - MTU3 pwm private data
+ *
+ * @chip: MTU3 pwm chip data
+ * @clk: MTU3 module clock
+ * @lock: Lock to prevent concurrent access for usage count
+ * @rate: MTU3 clock rate
+ * @user_count: MTU3 usage count
+ * @enable_count: MTU3 enable count
+ * @prescale: MTU3 prescale
+ * @channel_data: MTU3 pwm channel data
+ */
+
+struct rz_mtu3_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *clk;
+	struct mutex lock;
+	unsigned long rate;
+	u32 user_count[RZ_MTU3_MAX_HW_CHANNELS];
+	u32 enable_count[RZ_MTU3_MAX_HW_CHANNELS];
+	u8 prescale[RZ_MTU3_MAX_HW_CHANNELS];
+	struct rz_mtu3_pwm_channel channel_data[RZ_MTU3_MAX_HW_CHANNELS];
+};
+
+/*
+ * The MTU channels are {0..4, 6, 7} and the number of IO on MTU1
+ * and MTU2 channel is 1 compared to 2 on others.
+ */
+static const struct rz_mtu3_channel_io_map channel_map[] = {
+	{ 0, 2 }, { 2, 1 }, { 3, 1 }, { 4, 2 }, { 6, 2 }, { 8, 2 }, { 10, 2 }
+};
+
+static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct rz_mtu3_pwm_chip, chip);
+}
+
+static void rz_mtu3_pwm_read_tgr_registers(struct rz_mtu3_pwm_channel *priv,
+					   u16 reg_pv_offset, u16 *pv_val,
+					   u16 reg_dc_offset, u16 *dc_val)
+{
+	*pv_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_pv_offset);
+	*dc_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_dc_offset);
+}
+
+static void rz_mtu3_pwm_write_tgr_registers(struct rz_mtu3_pwm_channel *priv,
+					    u16 reg_pv_offset, u16 pv_val,
+					    u16 reg_dc_offset, u16 dc_val)
+{
+	rz_mtu3_16bit_ch_write(priv->mtu, reg_pv_offset, pv_val);
+	rz_mtu3_16bit_ch_write(priv->mtu, reg_dc_offset, dc_val);
+}
+
+static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
+					 u64 period_cycles)
+{
+	u32 prescaled_period_cycles;
+	u8 prescale;
+
+	/*
+	 * Supported prescale values are 1, 4, 16 and 64.
+	 * TODO: Support prescale values 2, 8, 32, 256 and 1024.
+	 */
+	prescaled_period_cycles = period_cycles >> 16;
+	if (prescaled_period_cycles >= 16)
+		prescale = 3;
+	else
+		prescale = (fls(prescaled_period_cycles) + 1) / 2;
+
+	return prescale;
+}
+
+static struct rz_mtu3_pwm_channel *
+rz_mtu3_get_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32 hwpwm)
+{
+	struct rz_mtu3_pwm_channel *priv = rz_mtu3_pwm->channel_data;
+	unsigned int ch;
+
+	for (ch = 0; ch < RZ_MTU3_MAX_HW_CHANNELS; ch++, priv++) {
+		if (priv->map->base_pwm_number + priv->map->num_channel_ios > hwpwm)
+			break;
+	}
+
+	return priv;
+}
+
+static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+				      u32 hwpwm)
+{
+	struct rz_mtu3_pwm_channel *priv;
+	bool is_channel_en;
+	u8 val;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, hwpwm);
+	is_channel_en = rz_mtu3_is_enabled(priv->mtu);
+	if (!is_channel_en)
+		return false;
+
+	if (priv->map->base_pwm_number == hwpwm)
+		val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORH);
+	else
+		val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORL);
+
+	return val & RZ_MTU3_TIOR_IOA;
+}
+
+static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+	struct rz_mtu3_pwm_channel *priv;
+	bool is_mtu3_channel_available;
+	u32 ch;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+	ch = priv - rz_mtu3_pwm->channel_data;
+
+	mutex_lock(&rz_mtu3_pwm->lock);
+	/*
+	 * Each channel must be requested only once, so if the channel
+	 * serves two PWMs and the other is already requested, skip over
+	 * rz_mtu3_request_channel()
+	 */
+	if (!rz_mtu3_pwm->user_count[ch]) {
+		is_mtu3_channel_available = rz_mtu3_request_channel(priv->mtu);
+		if (!is_mtu3_channel_available) {
+			mutex_unlock(&rz_mtu3_pwm->lock);
+			return -EBUSY;
+		}
+	}
+
+	rz_mtu3_pwm->user_count[ch]++;
+	mutex_unlock(&rz_mtu3_pwm->lock);
+
+	return 0;
+}
+
+static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+	struct rz_mtu3_pwm_channel *priv;
+	u32 ch;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+	ch = priv - rz_mtu3_pwm->channel_data;
+
+	mutex_lock(&rz_mtu3_pwm->lock);
+	rz_mtu3_pwm->user_count[ch]--;
+	if (!rz_mtu3_pwm->user_count[ch])
+		rz_mtu3_release_channel(priv->mtu);
+
+	mutex_unlock(&rz_mtu3_pwm->lock);
+}
+
+static int rz_mtu3_pwm_enable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+			      struct pwm_device *pwm)
+{
+	struct rz_mtu3_pwm_channel *priv;
+	u32 ch;
+	u8 val;
+	int rc;
+
+	rc = pm_runtime_resume_and_get(rz_mtu3_pwm->chip.dev);
+	if (rc)
+		return rc;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+	ch = priv - rz_mtu3_pwm->channel_data;
+	val = RZ_MTU3_TIOR_OC_IOB_TOGGLE | RZ_MTU3_TIOR_OC_IOA_H_COMP_MATCH;
+
+	rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWMMODE1);
+	if (priv->map->base_pwm_number == pwm->hwpwm)
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, val);
+	else
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, val);
+
+	mutex_lock(&rz_mtu3_pwm->lock);
+	if (!rz_mtu3_pwm->enable_count[ch])
+		rz_mtu3_enable(priv->mtu);
+
+	rz_mtu3_pwm->enable_count[ch]++;
+	mutex_unlock(&rz_mtu3_pwm->lock);
+
+	return 0;
+}
+
+static void rz_mtu3_pwm_disable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
+				struct pwm_device *pwm)
+{
+	struct rz_mtu3_pwm_channel *priv;
+	u32 ch;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+	ch = priv - rz_mtu3_pwm->channel_data;
+
+	/* Disable output pins of MTU3 channel */
+	if (priv->map->base_pwm_number == pwm->hwpwm)
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, RZ_MTU3_TIOR_OC_RETAIN);
+	else
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, RZ_MTU3_TIOR_OC_RETAIN);
+
+	mutex_lock(&rz_mtu3_pwm->lock);
+	rz_mtu3_pwm->enable_count[ch]--;
+	if (!rz_mtu3_pwm->enable_count[ch])
+		rz_mtu3_disable(priv->mtu);
+
+	mutex_unlock(&rz_mtu3_pwm->lock);
+
+	pm_runtime_put_sync(rz_mtu3_pwm->chip.dev);
+}
+
+static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				 struct pwm_state *state)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+	int rc;
+
+	rc = pm_runtime_resume_and_get(chip->dev);
+	if (rc)
+		return rc;
+
+	state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
+	if (state->enabled) {
+		struct rz_mtu3_pwm_channel *priv;
+		u8 prescale, val;
+		u16 dc, pv;
+		u64 tmp;
+
+		priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+		if (priv->map->base_pwm_number == pwm->hwpwm)
+			rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRA, &pv,
+						       RZ_MTU3_TGRB, &dc);
+		else
+			rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRC, &pv,
+						       RZ_MTU3_TGRD, &dc);
+
+		val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TCR);
+		prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
+
+		/* With prescale <= 7 and pv <= 0xffff this doesn't overflow. */
+		tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
+		state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
+		tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
+		state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
+
+		if (state->duty_cycle > state->period)
+			state->duty_cycle = state->period;
+	}
+
+	state->polarity = PWM_POLARITY_NORMAL;
+	pm_runtime_put(chip->dev);
+
+	return 0;
+}
+
+static u16 rz_mtu3_pwm_calculate_pv_or_dc(u64 period_or_duty_cycle, u8 prescale)
+{
+	return min(period_or_duty_cycle >> (2 * prescale), (u64)U16_MAX);
+}
+
+static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+	struct rz_mtu3_pwm_channel *priv;
+	u64 period_cycles;
+	u64 duty_cycles;
+	u8 prescale;
+	u16 pv, dc;
+	u8 val;
+	u32 ch;
+
+	priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
+	ch = priv - rz_mtu3_pwm->channel_data;
+
+	period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
+					NSEC_PER_SEC);
+	prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
+
+	/*
+	 * Prescalar is shared by multiple channels, so prescale can
+	 * NOT be modified when there are multiple channels in use with
+	 * different settings. Modify prescalar if other PWM is off or handle
+	 * it, if current prescale value is less than the one we want to set.
+	 */
+	if (rz_mtu3_pwm->enable_count[ch] > 1) {
+		if (rz_mtu3_pwm->prescale[ch] > prescale)
+			return -EBUSY;
+
+		prescale = rz_mtu3_pwm->prescale[ch];
+	}
+
+	pv = rz_mtu3_pwm_calculate_pv_or_dc(period_cycles, prescale);
+
+	duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
+				      NSEC_PER_SEC);
+	dc = rz_mtu3_pwm_calculate_pv_or_dc(duty_cycles, prescale);
+
+	/*
+	 * If the PWM channel is disabled, make sure to turn on the clock
+	 * before writing the register.
+	 */
+	if (!pwm->state.enabled) {
+		int rc;
+
+		rc = pm_runtime_resume_and_get(chip->dev);
+		if (rc)
+			return rc;
+	}
+
+	val = RZ_MTU3_TCR_CKEG_RISING | prescale;
+
+	/* Counter must be stopped while updating TCR register */
+	if (rz_mtu3_pwm->prescale[ch] != prescale && rz_mtu3_pwm->enable_count[ch])
+		rz_mtu3_disable(priv->mtu);
+
+	if (priv->map->base_pwm_number == pwm->hwpwm) {
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
+				      RZ_MTU3_TCR_CCLR_TGRA | val);
+		rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRA, pv,
+						RZ_MTU3_TGRB, dc);
+	} else {
+		rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
+				      RZ_MTU3_TCR_CCLR_TGRC | val);
+		rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRC, pv,
+						RZ_MTU3_TGRD, dc);
+	}
+
+	if (rz_mtu3_pwm->prescale[ch] != prescale) {
+		/*
+		 * Prescalar is shared by multiple channels, we cache the
+		 * prescalar value from first enabled channel and use the same
+		 * value for both channels.
+		 */
+		rz_mtu3_pwm->prescale[ch] = prescale;
+
+		if (rz_mtu3_pwm->enable_count[ch])
+			rz_mtu3_enable(priv->mtu);
+	}
+
+	/* If the PWM is not enabled, turn the clock off again to save power. */
+	if (!pwm->state.enabled)
+		pm_runtime_put(chip->dev);
+
+	return 0;
+}
+
+static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
+	bool enabled = pwm->state.enabled;
+	int ret;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (enabled)
+			rz_mtu3_pwm_disable(rz_mtu3_pwm, pwm);
+
+		return 0;
+	}
+
+	mutex_lock(&rz_mtu3_pwm->lock);
+	ret = rz_mtu3_pwm_config(chip, pwm, state);
+	mutex_unlock(&rz_mtu3_pwm->lock);
+	if (ret)
+		return ret;
+
+	if (!enabled)
+		ret = rz_mtu3_pwm_enable(rz_mtu3_pwm, pwm);
+
+	return ret;
+}
+
+static const struct pwm_ops rz_mtu3_pwm_ops = {
+	.request = rz_mtu3_pwm_request,
+	.free = rz_mtu3_pwm_free,
+	.get_state = rz_mtu3_pwm_get_state,
+	.apply = rz_mtu3_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(rz_mtu3_pwm->clk);
+
+	return 0;
+}
+
+static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(rz_mtu3_pwm->clk);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
+				 rz_mtu3_pwm_pm_runtime_suspend,
+				 rz_mtu3_pwm_pm_runtime_resume, NULL);
+
+static void rz_mtu3_pwm_pm_disable(void *data)
+{
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = data;
+
+	clk_rate_exclusive_put(rz_mtu3_pwm->clk);
+	pm_runtime_disable(rz_mtu3_pwm->chip.dev);
+	pm_runtime_set_suspended(rz_mtu3_pwm->chip.dev);
+}
+
+static int rz_mtu3_pwm_probe(struct platform_device *pdev)
+{
+	struct rz_mtu3 *parent_ddata = dev_get_drvdata(pdev->dev.parent);
+	struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
+	struct device *dev = &pdev->dev;
+	unsigned int i, j = 0;
+	int ret;
+
+	rz_mtu3_pwm = devm_kzalloc(&pdev->dev, sizeof(*rz_mtu3_pwm), GFP_KERNEL);
+	if (!rz_mtu3_pwm)
+		return -ENOMEM;
+
+	rz_mtu3_pwm->clk = parent_ddata->clk;
+
+	for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
+		if (i == RZ_MTU3_CHAN_5 || i == RZ_MTU3_CHAN_8)
+			continue;
+
+		rz_mtu3_pwm->channel_data[j].mtu = &parent_ddata->channels[i];
+		rz_mtu3_pwm->channel_data[j].mtu->dev = dev;
+		rz_mtu3_pwm->channel_data[j].map = &channel_map[j];
+		j++;
+	}
+
+	mutex_init(&rz_mtu3_pwm->lock);
+	platform_set_drvdata(pdev, rz_mtu3_pwm);
+	ret = clk_prepare_enable(rz_mtu3_pwm->clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "Clock enable failed\n");
+
+	clk_rate_exclusive_get(rz_mtu3_pwm->clk);
+
+	rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
+	/*
+	 * Refuse clk rates > 1 GHz to prevent overflow later for computing
+	 * period and duty cycle.
+	 */
+	if (rz_mtu3_pwm->rate > NSEC_PER_SEC) {
+		ret = -EINVAL;
+		clk_rate_exclusive_put(rz_mtu3_pwm->clk);
+		goto disable_clock;
+	}
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	rz_mtu3_pwm->chip.dev = &pdev->dev;
+	ret = devm_add_action_or_reset(&pdev->dev, rz_mtu3_pwm_pm_disable,
+				       rz_mtu3_pwm);
+	if (ret < 0)
+		return ret;
+
+	rz_mtu3_pwm->chip.ops = &rz_mtu3_pwm_ops;
+	rz_mtu3_pwm->chip.npwm = RZ_MTU3_MAX_PWM_CHANNELS;
+	ret = devm_pwmchip_add(&pdev->dev, &rz_mtu3_pwm->chip);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
+
+	pm_runtime_idle(&pdev->dev);
+
+	return 0;
+
+disable_clock:
+	clk_disable_unprepare(rz_mtu3_pwm->clk);
+	return ret;
+}
+
+static struct platform_driver rz_mtu3_pwm_driver = {
+	.driver = {
+		.name = "pwm-rz-mtu3",
+		.pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
+	},
+	.probe = rz_mtu3_pwm_probe,
+};
+module_platform_driver(rz_mtu3_pwm_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_ALIAS("platform:pwm-rz-mtu3");
+MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index 5b0574f635f6..ae49d67ab2b1 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -244,12 +244,12 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 	if (IS_ERR(ddata->regs))
 		return PTR_ERR(ddata->regs);
 
-	ddata->clk = devm_clk_get(dev, NULL);
+	ddata->clk = devm_clk_get_prepared(dev, NULL);
 	if (IS_ERR(ddata->clk))
 		return dev_err_probe(dev, PTR_ERR(ddata->clk),
 				     "Unable to find controller clock\n");
 
-	ret = clk_prepare_enable(ddata->clk);
+	ret = clk_enable(ddata->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable clock for pwm: %d\n", ret);
 		return ret;
@@ -308,7 +308,6 @@ disable_clk:
 		clk_disable(ddata->clk);
 		--enabled_clks;
 	}
-	clk_unprepare(ddata->clk);
 
 	return ret;
 }
@@ -327,8 +326,6 @@ static void pwm_sifive_remove(struct platform_device *dev)
 		if (pwm->state.enabled)
 			clk_disable(ddata->clk);
 	}
-
-	clk_unprepare(ddata->clk);
 }
 
 static const struct of_device_id pwm_sifive_of_match[] = {
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
index 1a106ec32939..8d1254761e4d 100644
--- a/drivers/pwm/sysfs.c
+++ b/drivers/pwm/sysfs.c
@@ -424,6 +424,13 @@ static int pwm_class_resume_npwm(struct device *parent, unsigned int npwm)
 		if (!export)
 			continue;
 
+		/* If pwmchip was not enabled before suspend, do nothing. */
+		if (!export->suspend.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = export->suspend.enabled;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0)
@@ -448,7 +455,17 @@ static int pwm_class_suspend(struct device *parent)
 		if (!export)
 			continue;
 
+		/*
+		 * If pwmchip was not enabled before suspend, save
+		 * state for resume time and do nothing else.
+		 */
 		export->suspend = state;
+		if (!state.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = false;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0) {