QE: Move QE from arch/powerpc to drivers/soc

ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

25 files changed, 3147 insertions, 17 deletions

diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 55c36230e176..d0a6fa6d4f3e 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -29,7 +29,7 @@
 
 #include <asm/io.h>
 #if IS_ENABLED(CONFIG_UCC_GETH)
-#include <asm/ucc.h>	/* for ucc_set_qe_mux_mii_mng() */
+#include <soc/fsl/qe/ucc.h>
 #endif
 
 #include "gianfar.h"
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 650f7888e32b..c30b72e02a1a 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -40,10 +40,10 @@
 #include <asm/uaccess.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
 #include <asm/machdep.h>
 
 #include "ucc_geth.h"
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index 75f337163ce3..5da19b440a6a 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -22,11 +22,11 @@
 #include <linux/list.h>
 #include <linux/if_ether.h>
 
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
 
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
 
 #define DRV_DESC "QE UCC Gigabit Ethernet Controller"
 #define DRV_NAME "ucc_geth"
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 4e853ed2c82b..ad0df75fab6e 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,6 +1,7 @@
 menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/brcmstb/Kconfig"
+source "drivers/soc/fsl/qe/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index f2ba2e932ae1..9536b804424a 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
+obj-y				+= fsl/
 obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
new file mode 100644
index 000000000000..203307fd92c1
--- /dev/null
+++ b/drivers/soc/fsl/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux Kernel SOC fsl specific device drivers
+#
+
+obj-$(CONFIG_QUICC_ENGINE)		+= qe/
+obj-$(CONFIG_CPM)			+= qe/
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
new file mode 100644
index 000000000000..20978f2058a6
--- /dev/null
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -0,0 +1,38 @@
+#
+# QE Communication options
+#
+
+config QUICC_ENGINE
+	bool "Freescale QUICC Engine (QE) Support"
+	depends on FSL_SOC && PPC32
+	select GENERIC_ALLOCATOR
+	select CRC32
+	help
+	  The QUICC Engine (QE) is a new generation of communications
+	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+	  Selecting this option means that you wish to build a kernel
+	  for a machine with a QE coprocessor.
+
+config UCC_SLOW
+	bool
+	default y if SERIAL_QE
+	help
+	  This option provides qe_lib support to UCC slow
+	  protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+	bool
+	default y if UCC_GETH
+	help
+	  This option provides qe_lib support to UCC fast
+	  protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+	bool
+	default y if UCC_FAST || UCC_SLOW
+
+config QE_USB
+	bool
+	default y if USB_FSL_QE
+	help
+	  QE USB Controller support
diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
new file mode 100644
index 000000000000..ffac5410c5c7
--- /dev/null
+++ b/drivers/soc/fsl/qe/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
+obj-$(CONFIG_CPM)	+= qe_common.o
+obj-$(CONFIG_UCC)	+= ucc.o
+obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
+obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
+obj-$(CONFIG_QE_USB)	+= usb.o
+obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
new file mode 100644
index 000000000000..aa5c11acf212
--- /dev/null
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -0,0 +1,317 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <soc/fsl/qe/qe.h>
+
+struct qe_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	unsigned long pin_flags[QE_PIO_PINS];
+#define QE_PIN_REQUESTED 0
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+
+	/* saved_regs used to restore dedicated functions */
+	struct qe_pio_regs saved_regs;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+	qe_gc->cpdata = in_be32(&regs->cpdata);
+	qe_gc->saved_regs.cpdata = qe_gc->cpdata;
+	qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
+	qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
+	qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
+	qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
+	qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	return in_be32(&regs->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	if (val)
+		qe_gc->cpdata |= pin_mask;
+	else
+		qe_gc->cpdata &= ~pin_mask;
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	qe_gpio_set(gc, gpio, val);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	return 0;
+}
+
+struct qe_pin {
+	/*
+	 * The qe_gpio_chip name is unfortunate, we should change that to
+	 * something like qe_pio_controller. Someday.
+	 */
+	struct qe_gpio_chip *controller;
+	int num;
+};
+
+/**
+ * qe_pin_request - Request a QE pin
+ * @np:		device node to get a pin from
+ * @index:	index of a pin in the device tree
+ * Context:	non-atomic
+ *
+ * This function return qe_pin so that you could use it with the rest of
+ * the QE Pin Multiplexing API.
+ */
+struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+	struct qe_pin *qe_pin;
+	struct gpio_chip *gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct qe_gpio_chip *qe_gc;
+	int err;
+	unsigned long flags;
+
+	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
+	if (!qe_pin) {
+		pr_debug("%s: can't allocate memory\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	err = of_get_gpio(np, index);
+	if (err < 0)
+		goto err0;
+	gc = gpio_to_chip(err);
+	if (WARN_ON(!gc))
+		goto err0;
+
+	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
+		pr_debug("%s: tried to get a non-qe pin\n", __func__);
+		err = -EINVAL;
+		goto err0;
+	}
+
+	mm_gc = to_of_mm_gpio_chip(gc);
+	qe_gc = to_qe_gpio_chip(mm_gc);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	err -= gc->base;
+	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
+		qe_pin->controller = qe_gc;
+		qe_pin->num = err;
+		err = 0;
+	} else {
+		err = -EBUSY;
+	}
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	if (!err)
+		return qe_pin;
+err0:
+	kfree(qe_pin);
+	pr_debug("%s failed with status %d\n", __func__, err);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL(qe_pin_request);
+
+/**
+ * qe_pin_free - Free a pin
+ * @qe_pin:	pointer to the qe_pin structure
+ * Context:	any
+ *
+ * This function frees the qe_pin structure and makes a pin available
+ * for further qe_pin_request() calls.
+ */
+void qe_pin_free(struct qe_pin *qe_pin)
+{
+	struct qe_gpio_chip *qe_gc = qe_pin->controller;
+	unsigned long flags;
+	const int pin = qe_pin->num;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+	test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	kfree(qe_pin);
+}
+EXPORT_SYMBOL(qe_pin_free);
+
+/**
+ * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
+ * @qe_pin:	pointer to the qe_pin structure
+ * Context:	any
+ *
+ * This function resets a pin to a dedicated peripheral function that
+ * has been set up by the firmware.
+ */
+void qe_pin_set_dedicated(struct qe_pin *qe_pin)
+{
+	struct qe_gpio_chip *qe_gc = qe_pin->controller;
+	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+	struct qe_pio_regs *sregs = &qe_gc->saved_regs;
+	int pin = qe_pin->num;
+	u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
+	u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
+	bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	if (second_reg) {
+		clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
+		clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
+	} else {
+		clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
+		clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
+	}
+
+	if (sregs->cpdata & mask1)
+		qe_gc->cpdata |= mask1;
+	else
+		qe_gc->cpdata &= ~mask1;
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+	clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_dedicated);
+
+/**
+ * qe_pin_set_gpio - Set a pin to the GPIO mode
+ * @qe_pin:	pointer to the qe_pin structure
+ * Context:	any
+ *
+ * This function sets a pin to the GPIO mode.
+ */
+void qe_pin_set_gpio(struct qe_pin *qe_pin)
+{
+	struct qe_gpio_chip *qe_gc = qe_pin->controller;
+	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	/* Let's make it input by default, GPIO API is able to change that. */
+	__par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+EXPORT_SYMBOL(qe_pin_set_gpio);
+
+static int __init qe_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+		int ret;
+		struct qe_gpio_chip *qe_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct gpio_chip *gc;
+
+		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+		if (!qe_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&qe_gc->lock);
+
+		mm_gc = &qe_gc->mm_gc;
+		gc = &mm_gc->gc;
+
+		mm_gc->save_regs = qe_gpio_save_regs;
+		gc->ngpio = QE_PIO_PINS;
+		gc->direction_input = qe_gpio_dir_in;
+		gc->direction_output = qe_gpio_dir_out;
+		gc->get = qe_gpio_get;
+		gc->set = qe_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(qe_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
new file mode 100644
index 000000000000..709fc63809e5
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe.c
@@ -0,0 +1,719 @@
+/*
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+static void qe_snums_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
+
+/* QE snum state */
+enum qe_snum_state {
+	QE_SNUM_STATE_USED,
+	QE_SNUM_STATE_FREE
+};
+
+/* QE snum */
+struct qe_snum {
+	u8 num;
+	enum qe_snum_state state;
+};
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+struct qe_immap __iomem *qe_immr;
+EXPORT_SYMBOL(qe_immr);
+
+static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+	struct device_node *qe;
+	int size;
+	const u32 *prop;
+
+	if (qebase != -1)
+		return qebase;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return qebase;
+	}
+
+	prop = of_get_property(qe, "reg", &size);
+	if (prop && size >= sizeof(*prop))
+		qebase = of_translate_address(qe, prop);
+	of_node_put(qe);
+
+	return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+void qe_reset(void)
+{
+	if (qe_immr == NULL)
+		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+	qe_snums_init();
+
+	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+	/* Reclaim the MURAM memory for our use. */
+	qe_muram_init();
+
+	if (qe_sdma_init())
+		panic("sdma init failed!");
+}
+
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
+{
+	unsigned long flags;
+	u8 mcn_shift = 0, dev_shift = 0;
+	u32 ret;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	if (cmd == QE_RESET) {
+		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+	} else {
+		if (cmd == QE_ASSIGN_PAGE) {
+			/* Here device is the SNUM, not sub-block */
+			dev_shift = QE_CR_SNUM_SHIFT;
+		} else if (cmd == QE_ASSIGN_RISC) {
+			/* Here device is the SNUM, and mcnProtocol is
+			 * e_QeCmdRiscAssignment value */
+			dev_shift = QE_CR_SNUM_SHIFT;
+			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+		} else {
+			if (device == QE_CR_SUBBLOCK_USB)
+				mcn_shift = QE_CR_MCN_USB_SHIFT;
+			else
+				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+		}
+
+		out_be32(&qe_immr->cp.cecdr, cmd_input);
+		out_be32(&qe_immr->cp.cecr,
+			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+			  mcn_protocol << mcn_shift));
+	}
+
+	/* wait for the QE_CR_FLG to clear */
+	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+			   100, 0);
+	/* On timeout (e.g. failure), the expression will be false (ret == 0),
+	   otherwise it will be true (ret == 1). */
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return ret == 1;
+}
+EXPORT_SYMBOL(qe_issue_cmd);
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The BRG clock is the QE clock divided by 2.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int qe_get_brg_clk(void)
+{
+	struct device_node *qe;
+	int size;
+	const u32 *prop;
+
+	if (brg_clk)
+		return brg_clk;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return brg_clk;
+	}
+
+	prop = of_get_property(qe, "brg-frequency", &size);
+	if (prop && size == sizeof(*prop))
+		brg_clk = *prop;
+
+	of_node_put(qe);
+
+	return brg_clk;
+}
+EXPORT_SYMBOL(qe_get_brg_clk);
+
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, QE_BRG1 - QE_BRG16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ */
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
+{
+	u32 divisor, tempval;
+	u32 div16 = 0;
+
+	if ((brg < QE_BRG1) || (brg > QE_BRG16))
+		return -EINVAL;
+
+	divisor = qe_get_brg_clk() / (rate * multiplier);
+
+	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+		div16 = QE_BRGC_DIV16;
+		divisor /= 16;
+	}
+
+	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+	   that the BRG divisor must be even if you're not using divide-by-16
+	   mode. */
+	if (!div16 && (divisor & 1) && (divisor > 3))
+		divisor++;
+
+	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+		QE_BRGC_ENABLE | div16;
+
+	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_setbrg);
+
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+	unsigned int i;
+
+	if (strcasecmp(source, "none") == 0)
+		return QE_CLK_NONE;
+
+	if (strncasecmp(source, "brg", 3) == 0) {
+		i = simple_strtoul(source + 3, NULL, 10);
+		if ((i >= 1) && (i <= 16))
+			return (QE_BRG1 - 1) + i;
+		else
+			return QE_CLK_DUMMY;
+	}
+
+	if (strncasecmp(source, "clk", 3) == 0) {
+		i = simple_strtoul(source + 3, NULL, 10);
+		if ((i >= 1) && (i <= 24))
+			return (QE_CLK1 - 1) + i;
+		else
+			return QE_CLK_DUMMY;
+	}
+
+	return QE_CLK_DUMMY;
+}
+EXPORT_SYMBOL(qe_clock_source);
+
+/* Initialize SNUMs (thread serial numbers) according to
+ * QE Module Control chapter, SNUM table
+ */
+static void qe_snums_init(void)
+{
+	int i;
+	static const u8 snum_init_76[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
+		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
+		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
+		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
+		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
+		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
+		0xF4, 0xF5, 0xFC, 0xFD,
+	};
+	static const u8 snum_init_46[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
+	};
+	static const u8 *snum_init;
+
+	qe_num_of_snum = qe_get_num_of_snums();
+
+	if (qe_num_of_snum == 76)
+		snum_init = snum_init_76;
+	else
+		snum_init = snum_init_46;
+
+	for (i = 0; i < qe_num_of_snum; i++) {
+		snums[i].num = snum_init[i];
+		snums[i].state = QE_SNUM_STATE_FREE;
+	}
+}
+
+int qe_get_snum(void)
+{
+	unsigned long flags;
+	int snum = -EBUSY;
+	int i;
+
+	spin_lock_irqsave(&qe_lock, flags);
+	for (i = 0; i < qe_num_of_snum; i++) {
+		if (snums[i].state == QE_SNUM_STATE_FREE) {
+			snums[i].state = QE_SNUM_STATE_USED;
+			snum = snums[i].num;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&qe_lock, flags);
+
+	return snum;
+}
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+	int i;
+
+	for (i = 0; i < qe_num_of_snum; i++) {
+		if (snums[i].num == snum) {
+			snums[i].state = QE_SNUM_STATE_FREE;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+	struct sdma __iomem *sdma = &qe_immr->sdma;
+	static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
+
+	if (!sdma)
+		return -ENODEV;
+
+	/* allocate 2 internal temporary buffers (512 bytes size each) for
+	 * the SDMA */
+	if (IS_ERR_VALUE(sdma_buf_offset)) {
+		sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+		if (IS_ERR_VALUE(sdma_buf_offset))
+			return -ENOMEM;
+	}
+
+	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
+ 					(0x1 << QE_SDMR_CEN_SHIFT)));
+
+	return 0;
+}
+
+/* The maximum number of RISCs we support */
+#define MAX_QE_RISC     4
+
+/* Firmware information stored here for qe_get_firmware_info() */
+static struct qe_firmware_info qe_firmware_info;
+
+/*
+ * Set to 1 if QE firmware has been uploaded, and therefore
+ * qe_firmware_info contains valid data.
+ */
+static int qe_firmware_uploaded;
+
+/*
+ * Upload a QE microcode
+ *
+ * This function is a worker function for qe_upload_firmware().  It does
+ * the actual uploading of the microcode.
+ */
+static void qe_upload_microcode(const void *base,
+	const struct qe_microcode *ucode)
+{
+	const __be32 *code = base + be32_to_cpu(ucode->code_offset);
+	unsigned int i;
+
+	if (ucode->major || ucode->minor || ucode->revision)
+		printk(KERN_INFO "qe-firmware: "
+			"uploading microcode '%s' version %u.%u.%u\n",
+			ucode->id, ucode->major, ucode->minor, ucode->revision);
+	else
+		printk(KERN_INFO "qe-firmware: "
+			"uploading microcode '%s'\n", ucode->id);
+
+	/* Use auto-increment */
+	out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+		QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+	for (i = 0; i < be32_to_cpu(ucode->count); i++)
+		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+	
+	/* Set I-RAM Ready Register */
+	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+}
+
+/*
+ * Upload a microcode to the I-RAM at a specific address.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
+ * uploading.
+ *
+ * Currently, only version 1 is supported, so the 'version' field must be
+ * set to 1.
+ *
+ * The SOC model and revision are not validated, they are only displayed for
+ * informational purposes.
+ *
+ * 'calc_size' is the calculated size, in bytes, of the firmware structure and
+ * all of the microcode structures, minus the CRC.
+ *
+ * 'length' is the size that the structure says it is, including the CRC.
+ */
+int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+	unsigned int i;
+	unsigned int j;
+	u32 crc;
+	size_t calc_size = sizeof(struct qe_firmware);
+	size_t length;
+	const struct qe_header *hdr;
+
+	if (!firmware) {
+		printk(KERN_ERR "qe-firmware: invalid pointer\n");
+		return -EINVAL;
+	}
+
+	hdr = &firmware->header;
+	length = be32_to_cpu(hdr->length);
+
+	/* Check the magic */
+	if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+	    (hdr->magic[2] != 'F')) {
+		printk(KERN_ERR "qe-firmware: not a microcode\n");
+		return -EPERM;
+	}
+
+	/* Check the version */
+	if (hdr->version != 1) {
+		printk(KERN_ERR "qe-firmware: unsupported version\n");
+		return -EPERM;
+	}
+
+	/* Validate some of the fields */
+	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
+		printk(KERN_ERR "qe-firmware: invalid data\n");
+		return -EINVAL;
+	}
+
+	/* Validate the length and check if there's a CRC */
+	calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+	for (i = 0; i < firmware->count; i++)
+		/*
+		 * For situations where the second RISC uses the same microcode
+		 * as the first, the 'code_offset' and 'count' fields will be
+		 * zero, so it's okay to add those.
+		 */
+		calc_size += sizeof(__be32) *
+			be32_to_cpu(firmware->microcode[i].count);
+
+	/* Validate the length */
+	if (length != calc_size + sizeof(__be32)) {
+		printk(KERN_ERR "qe-firmware: invalid length\n");
+		return -EPERM;
+	}
+
+	/* Validate the CRC */
+	crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
+	if (crc != crc32(0, firmware, calc_size)) {
+		printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
+		return -EIO;
+	}
+
+	/*
+	 * If the microcode calls for it, split the I-RAM.
+	 */
+	if (!firmware->split)
+		setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+
+	if (firmware->soc.model)
+		printk(KERN_INFO
+			"qe-firmware: firmware '%s' for %u V%u.%u\n",
+			firmware->id, be16_to_cpu(firmware->soc.model),
+			firmware->soc.major, firmware->soc.minor);
+	else
+		printk(KERN_INFO "qe-firmware: firmware '%s'\n",
+			firmware->id);
+
+	/*
+	 * The QE only supports one microcode per RISC, so clear out all the
+	 * saved microcode information and put in the new.
+	 */
+	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
+	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
+	qe_firmware_info.extended_modes = firmware->extended_modes;
+	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
+		sizeof(firmware->vtraps));
+
+	/* Loop through each microcode. */
+	for (i = 0; i < firmware->count; i++) {
+		const struct qe_microcode *ucode = &firmware->microcode[i];
+
+		/* Upload a microcode if it's present */
+		if (ucode->code_offset)
+			qe_upload_microcode(firmware, ucode);
+
+		/* Program the traps for this processor */
+		for (j = 0; j < 16; j++) {
+			u32 trap = be32_to_cpu(ucode->traps[j]);
+
+			if (trap)
+				out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+		}
+
+		/* Enable traps */
+		out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+	}
+
+	qe_firmware_uploaded = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_upload_firmware);
+
+/*
+ * Get info on the currently-loaded firmware
+ *
+ * This function also checks the device tree to see if the boot loader has
+ * uploaded a firmware already.
+ */
+struct qe_firmware_info *qe_get_firmware_info(void)
+{
+	static int initialized;
+	struct property *prop;
+	struct device_node *qe;
+	struct device_node *fw = NULL;
+	const char *sprop;
+	unsigned int i;
+
+	/*
+	 * If we haven't checked yet, and a driver hasn't uploaded a firmware
+	 * yet, then check the device tree for information.
+	 */
+	if (qe_firmware_uploaded)
+		return &qe_firmware_info;
+
+	if (initialized)
+		return NULL;
+
+	initialized = 1;
+
+	/*
+	 * Newer device trees have an "fsl,qe" compatible property for the QE
+	 * node, but we still need to support older device trees.
+	*/
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return NULL;
+	}
+
+	/* Find the 'firmware' child node */
+	for_each_child_of_node(qe, fw) {
+		if (strcmp(fw->name, "firmware") == 0)
+			break;
+	}
+
+	of_node_put(qe);
+
+	/* Did we find the 'firmware' node? */
+	if (!fw)
+		return NULL;
+
+	qe_firmware_uploaded = 1;
+
+	/* Copy the data into qe_firmware_info*/
+	sprop = of_get_property(fw, "id", NULL);
+	if (sprop)
+		strlcpy(qe_firmware_info.id, sprop,
+			sizeof(qe_firmware_info.id));
+
+	prop = of_find_property(fw, "extended-modes", NULL);
+	if (prop && (prop->length == sizeof(u64))) {
+		const u64 *iprop = prop->value;
+
+		qe_firmware_info.extended_modes = *iprop;
+	}
+
+	prop = of_find_property(fw, "virtual-traps", NULL);
+	if (prop && (prop->length == 32)) {
+		const u32 *iprop = prop->value;
+
+		for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
+			qe_firmware_info.vtraps[i] = iprop[i];
+	}
+
+	of_node_put(fw);
+
+	return &qe_firmware_info;
+}
+EXPORT_SYMBOL(qe_get_firmware_info);
+
+unsigned int qe_get_num_of_risc(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_risc = 0;
+	const u32 *prop;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_risc;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+	if (prop && size == sizeof(*prop))
+		num_of_risc = *prop;
+
+	of_node_put(qe);
+
+	return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_snums;
+	const u32 *prop;
+
+	num_of_snums = 28; /* The default number of snum for threads is 28 */
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_snums;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+	if (prop && size == sizeof(*prop)) {
+		num_of_snums = *prop;
+		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+			/* No QE ever has fewer than 28 SNUMs */
+			pr_err("QE: number of snum is invalid\n");
+			of_node_put(qe);
+			return -EINVAL;
+		}
+	}
+
+	of_node_put(qe);
+
+	return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
+
+static int __init qe_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np)
+		return -ENODEV;
+	qe_reset();
+	of_node_put(np);
+	return 0;
+}
+subsys_initcall(qe_init);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct platform_device *ofdev)
+{
+	if (!qe_alive_during_sleep())
+		qe_reset();
+	return 0;
+}
+
+static int qe_probe(struct platform_device *ofdev)
+{
+	return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+	{ .compatible = "fsl,qe", },
+	{ },
+};
+
+static struct platform_driver qe_driver = {
+	.driver = {
+		.name = "fsl-qe",
+		.of_match_table = qe_ids,
+	},
+	.probe = qe_probe,
+	.resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+	return platform_driver_register(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
new file mode 100644
index 000000000000..419fa5b7be4d
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -0,0 +1,235 @@
+/*
+ * Common CPM code
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
+ *
+ * Some parts derived from commproc.c/cpm2_common.c, which is:
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <soc/fsl/qe/qe.h>
+
+static struct gen_pool *muram_pool;
+static spinlock_t cpm_muram_lock;
+static u8 __iomem *muram_vbase;
+static phys_addr_t muram_pbase;
+
+struct muram_block {
+	struct list_head head;
+	unsigned long start;
+	int size;
+};
+
+static LIST_HEAD(muram_block_list);
+
+/* max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+#define GENPOOL_OFFSET		(4096 * 8)
+
+int cpm_muram_init(void)
+{
+	struct device_node *np;
+	struct resource r;
+	u32 zero[OF_MAX_ADDR_CELLS] = {};
+	resource_size_t max = 0;
+	int i = 0;
+	int ret = 0;
+
+	if (muram_pbase)
+		return 0;
+
+	spin_lock_init(&cpm_muram_lock);
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
+	if (!np) {
+		/* try legacy bindings */
+		np = of_find_node_by_name(NULL, "data-only");
+		if (!np) {
+			pr_err("Cannot find CPM muram data node");
+			ret = -ENODEV;
+			goto out_muram;
+		}
+	}
+
+	muram_pool = gen_pool_create(0, -1);
+	muram_pbase = of_translate_address(np, zero);
+	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
+		pr_err("Cannot translate zero through CPM muram node");
+		ret = -ENODEV;
+		goto out_pool;
+	}
+
+	while (of_address_to_resource(np, i++, &r) == 0) {
+		if (r.end > max)
+			max = r.end;
+		ret = gen_pool_add(muram_pool, r.start - muram_pbase +
+				   GENPOOL_OFFSET, resource_size(&r), -1);
+		if (ret) {
+			pr_err("QE: couldn't add muram to pool!\n");
+			goto out_pool;
+		}
+	}
+
+	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
+	if (!muram_vbase) {
+		pr_err("Cannot map QE muram");
+		ret = -ENOMEM;
+		goto out_pool;
+	}
+	goto out_muram;
+out_pool:
+	gen_pool_destroy(muram_pool);
+out_muram:
+	of_node_put(np);
+	return ret;
+}
+
+/*
+ * cpm_muram_alloc - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ *
+ * This function returns an offset into the muram area.
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+{
+	unsigned long start;
+	unsigned long flags;
+	struct genpool_data_align muram_pool_data;
+
+	spin_lock_irqsave(&cpm_muram_lock, flags);
+	muram_pool_data.align = align;
+	start = cpm_muram_alloc_common(size, gen_pool_first_fit_align,
+				       &muram_pool_data);
+	spin_unlock_irqrestore(&cpm_muram_lock, flags);
+	return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc);
+
+/**
+ * cpm_muram_free - free a chunk of multi-user ram
+ * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
+ */
+int cpm_muram_free(unsigned long offset)
+{
+	unsigned long flags;
+	int size;
+	struct muram_block *tmp;
+
+	size = 0;
+	spin_lock_irqsave(&cpm_muram_lock, flags);
+	list_for_each_entry(tmp, &muram_block_list, head) {
+		if (tmp->start == offset) {
+			size = tmp->size;
+			list_del(&tmp->head);
+			kfree(tmp);
+			break;
+		}
+	}
+	gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size);
+	spin_unlock_irqrestore(&cpm_muram_lock, flags);
+	return size;
+}
+EXPORT_SYMBOL(cpm_muram_free);
+
+/*
+ * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
+ * @offset: offset of allocation start address
+ * @size: number of bytes to allocate
+ * This function returns an offset into the muram area
+ * Use cpm_dpram_addr() to get the virtual address of the area.
+ * Use cpm_muram_free() to free the allocation.
+ */
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+{
+	unsigned long start;
+	unsigned long flags;
+	struct genpool_data_fixed muram_pool_data_fixed;
+
+	spin_lock_irqsave(&cpm_muram_lock, flags);
+	muram_pool_data_fixed.offset = offset + GENPOOL_OFFSET;
+	start = cpm_muram_alloc_common(size, gen_pool_fixed_alloc,
+				       &muram_pool_data_fixed);
+	spin_unlock_irqrestore(&cpm_muram_lock, flags);
+	return start;
+}
+EXPORT_SYMBOL(cpm_muram_alloc_fixed);
+
+/*
+ * cpm_muram_alloc_common - cpm_muram_alloc common code
+ * @size: number of bytes to allocate
+ * @algo: algorithm for alloc.
+ * @data: data for genalloc's algorithm.
+ *
+ * This function returns an offset into the muram area.
+ */
+unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo,
+				     void *data)
+{
+	struct muram_block *entry;
+	unsigned long start;
+
+	start = gen_pool_alloc_algo(muram_pool, size, algo, data);
+	if (!start)
+		goto out2;
+	start = start - GENPOOL_OFFSET;
+	memset_io(cpm_muram_addr(start), 0, size);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		goto out1;
+	entry->start = start;
+	entry->size = size;
+	list_add(&entry->head, &muram_block_list);
+
+	return start;
+out1:
+	gen_pool_free(muram_pool, start, size);
+out2:
+	return (unsigned long)-ENOMEM;
+}
+
+/**
+ * cpm_muram_addr - turn a muram offset into a virtual address
+ * @offset: muram offset to convert
+ */
+void __iomem *cpm_muram_addr(unsigned long offset)
+{
+	return muram_vbase + offset;
+}
+EXPORT_SYMBOL(cpm_muram_addr);
+
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
+/**
+ * cpm_muram_dma - turn a muram virtual address into a DMA address
+ * @offset: virtual address from cpm_muram_addr() to convert
+ */
+dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+}
+EXPORT_SYMBOL(cpm_muram_dma);
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
new file mode 100644
index 000000000000..b77d01ff8330
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -0,0 +1,503 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+	[1] = {
+	       .mask = 0x00008000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 0,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[2] = {
+	       .mask = 0x00004000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 1,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[3] = {
+	       .mask = 0x00002000,
+	       .mask_reg = QEIC_CIMR,
+	       .pri_code = 2,
+	       .pri_reg = QEIC_CIPWCC,
+	       },
+	[10] = {
+		.mask = 0x00000040,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[11] = {
+		.mask = 0x00000020,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[12] = {
+		.mask = 0x00000010,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[13] = {
+		.mask = 0x00000008,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[14] = {
+		.mask = 0x00000004,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 5,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[15] = {
+		.mask = 0x00000002,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 6,
+		.pri_reg = QEIC_CIPZCC,
+		},
+	[20] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTA,
+		},
+	[25] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[26] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[27] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[28] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CRIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPRTB,
+		},
+	[32] = {
+		.mask = 0x80000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[33] = {
+		.mask = 0x40000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[34] = {
+		.mask = 0x20000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[35] = {
+		.mask = 0x10000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[36] = {
+		.mask = 0x08000000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 4,
+		.pri_reg = QEIC_CIPXCC,
+		},
+	[40] = {
+		.mask = 0x00800000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 0,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[41] = {
+		.mask = 0x00400000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 1,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[42] = {
+		.mask = 0x00200000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 2,
+		.pri_reg = QEIC_CIPYCC,
+		},
+	[43] = {
+		.mask = 0x00100000,
+		.mask_reg = QEIC_CIMR,
+		.pri_code = 3,
+		.pri_reg = QEIC_CIPYCC,
+		},
+};
+
+static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
+			       u32 value)
+{
+	out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+	return irq_get_chip_data(virq);
+}
+
+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
+{
+	return irq_data_get_irq_chip_data(d);
+}
+
+static void qe_ic_unmask_irq(struct irq_data *d)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 temp;
+
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp | qe_ic_info[src].mask);
+
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(struct irq_data *d)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+	unsigned int src = irqd_to_hwirq(d);
+	unsigned long flags;
+	u32 temp;
+
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+		    temp & ~qe_ic_info[src].mask);
+
+	/* Flush the above write before enabling interrupts; otherwise,
+	 * spurious interrupts will sometimes happen.  To be 100% sure
+	 * that the write has reached the device before interrupts are
+	 * enabled, the mask register would have to be read back; however,
+	 * this is not required for correctness, only to avoid wasting
+	 * time on a large number of spurious interrupts.  In testing,
+	 * a sync reduced the observed spurious interrupts to zero.
+	 */
+	mb();
+
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+	.name = "QEIC",
+	.irq_unmask = qe_ic_unmask_irq,
+	.irq_mask = qe_ic_mask_irq,
+	.irq_mask_ack = qe_ic_mask_irq,
+};
+
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
+			    enum irq_domain_bus_token bus_token)
+{
+	/* Exact match, unless qe_ic node is NULL */
+	struct device_node *of_node = irq_domain_get_of_node(h);
+	return of_node == NULL || of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	struct qe_ic *qe_ic = h->host_data;
+	struct irq_chip *chip;
+
+	if (qe_ic_info[hw].mask == 0) {
+		printk(KERN_ERR "Can't map reserved IRQ\n");
+		return -EINVAL;
+	}
+	/* Default chip */
+	chip = &qe_ic->hc_irq;
+
+	irq_set_chip_data(virq, qe_ic);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops qe_ic_host_ops = {
+	.match = qe_ic_host_match,
+	.map = qe_ic_host_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{
+	int irq;
+
+	BUG_ON(qe_ic == NULL);
+
+	/* get the interrupt source vector. */
+	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+	if (irq == 0)
+		return NO_IRQ;
+
+	return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags,
+		       void (*low_handler)(struct irq_desc *desc),
+		       void (*high_handler)(struct irq_desc *desc))
+{
+	struct qe_ic *qe_ic;
+	struct resource res;
+	u32 temp = 0, ret, high_active = 0;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
+	if (qe_ic == NULL)
+		return;
+
+	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+					       &qe_ic_host_ops, qe_ic);
+	if (qe_ic->irqhost == NULL) {
+		kfree(qe_ic);
+		return;
+	}
+
+	qe_ic->regs = ioremap(res.start, resource_size(&res));
+
+	qe_ic->hc_irq = qe_ic_irq_chip;
+
+	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+	if (qe_ic->virq_low == NO_IRQ) {
+		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+		kfree(qe_ic);
+		return;
+	}
+
+	/* default priority scheme is grouped. If spread mode is    */
+	/* required, configure cicr accordingly.                    */
+	if (flags & QE_IC_SPREADMODE_GRP_W)
+		temp |= CICR_GWCC;
+	if (flags & QE_IC_SPREADMODE_GRP_X)
+		temp |= CICR_GXCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Y)
+		temp |= CICR_GYCC;
+	if (flags & QE_IC_SPREADMODE_GRP_Z)
+		temp |= CICR_GZCC;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+		temp |= CICR_GRTA;
+	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+		temp |= CICR_GRTB;
+
+	/* choose destination signal for highest priority interrupt */
+	if (flags & QE_IC_HIGH_SIGNAL) {
+		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+		high_active = 1;
+	}
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+	irq_set_handler_data(qe_ic->virq_low, qe_ic);
+	irq_set_chained_handler(qe_ic->virq_low, low_handler);
+
+	if (qe_ic->virq_high != NO_IRQ &&
+			qe_ic->virq_high != qe_ic->virq_low) {
+		irq_set_handler_data(qe_ic->virq_high, qe_ic);
+		irq_set_chained_handler(qe_ic->virq_high, high_handler);
+	}
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp = 0;
+
+	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+	temp &= ~CICR_HP_MASK;
+	temp |= src << CICR_HP_SHIFT;
+
+	temp &= ~CICR_HPIT_MASK;
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp;
+
+	if (priority > 8 || priority == 0)
+		return -EINVAL;
+	if (src > 127)
+		return -EINVAL;
+	if (qe_ic_info[src].pri_reg == 0)
+		return -EINVAL;
+
+	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+	if (priority < 4) {
+		temp &= ~(0x7 << (32 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+	} else {
+		temp &= ~(0x7 << (24 - priority * 3));
+		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+	}
+
+	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+	return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+	unsigned int src = virq_to_hw(virq);
+	u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+	if (priority > 2 || priority == 0)
+		return -EINVAL;
+
+	switch (qe_ic_info[src].pri_reg) {
+	case QEIC_CIPZCC:
+		shift = CICNR_ZCC1T_SHIFT;
+		break;
+	case QEIC_CIPWCC:
+		shift = CICNR_WCC1T_SHIFT;
+		break;
+	case QEIC_CIPYCC:
+		shift = CICNR_YCC1T_SHIFT;
+		break;
+	case QEIC_CIPXCC:
+		shift = CICNR_XCC1T_SHIFT;
+		break;
+	case QEIC_CIPRTA:
+		shift = CRICR_RTA1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	case QEIC_CIPRTB:
+		shift = CRICR_RTB1T_SHIFT;
+		control_reg = QEIC_CRICR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	shift += (2 - priority) * 2;
+	temp = qe_ic_read(qe_ic->regs, control_reg);
+	temp &= ~(SIGNAL_MASK << shift);
+	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+	qe_ic_write(qe_ic->regs, control_reg, temp);
+
+	return 0;
+}
+
+static struct bus_type qe_ic_subsys = {
+	.name = "qe_ic",
+	.dev_name = "qe_ic",
+};
+
+static struct device device_qe_ic = {
+	.id = 0,
+	.bus = &qe_ic_subsys,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+	int rc;
+
+	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+	rc = subsys_system_register(&qe_ic_subsys, NULL);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys class\n");
+		return -ENODEV;
+	}
+	rc = device_register(&device_qe_ic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering qe_ic sys device\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
new file mode 100644
index 000000000000..926a2ed42319
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_ic.h
@@ -0,0 +1,103 @@
+/*
+ * drivers/soc/fsl/qe/qe_ic.h
+ *
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _POWERPC_SYSDEV_QE_IC_H
+#define _POWERPC_SYSDEV_QE_IC_H
+
+#include <soc/fsl/qe/qe_ic.h>
+
+#define NR_QE_IC_INTS		64
+
+/* QE IC registers offset */
+#define QEIC_CICR		0x00
+#define QEIC_CIVEC		0x04
+#define QEIC_CRIPNR		0x08
+#define QEIC_CIPNR		0x0c
+#define QEIC_CIPXCC		0x10
+#define QEIC_CIPYCC		0x14
+#define QEIC_CIPWCC		0x18
+#define QEIC_CIPZCC		0x1c
+#define QEIC_CIMR		0x20
+#define QEIC_CRIMR		0x24
+#define QEIC_CICNR		0x28
+#define QEIC_CIPRTA		0x30
+#define QEIC_CIPRTB		0x34
+#define QEIC_CRICR		0x3c
+#define QEIC_CHIVEC		0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0	29
+#define CIPCC_SHIFT_PRI1	26
+#define CIPCC_SHIFT_PRI2	23
+#define CIPCC_SHIFT_PRI3	20
+#define CIPCC_SHIFT_PRI4	13
+#define CIPCC_SHIFT_PRI5	10
+#define CIPCC_SHIFT_PRI6	7
+#define CIPCC_SHIFT_PRI7	4
+
+/* CICR priority modes */
+#define CICR_GWCC		0x00040000
+#define CICR_GXCC		0x00020000
+#define CICR_GYCC		0x00010000
+#define CICR_GZCC		0x00080000
+#define CICR_GRTA		0x00200000
+#define CICR_GRTB		0x00400000
+#define CICR_HPIT_SHIFT		8
+#define CICR_HPIT_MASK		0x00000300
+#define CICR_HP_SHIFT		24
+#define CICR_HP_MASK		0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT	20
+#define CICNR_ZCC1T_SHIFT	28
+#define CICNR_YCC1T_SHIFT	12
+#define CICNR_XCC1T_SHIFT	4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT	20
+#define CRICR_RTB1T_SHIFT	28
+
+/* Signal indicator */
+#define SIGNAL_MASK		3
+#define SIGNAL_HIGH		2
+#define SIGNAL_LOW		0
+
+struct qe_ic {
+	/* Control registers offset */
+	volatile u32 __iomem *regs;
+
+	/* The remapper for this QEIC */
+	struct irq_domain *irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip hc_irq;
+
+	/* VIRQ numbers of QE high/low irqs */
+	unsigned int virq_high;
+	unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+	u32	mask;	  /* location of this source at the QIMR register. */
+	u32	mask_reg; /* Mask register offset */
+	u8	pri_code; /* for grouped interrupts sources - the interrupt
+			     code as appears at the group priority register */
+	u32	pri_reg;  /* Group priority register offset */
+};
+
+#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
new file mode 100644
index 000000000000..7ae59abc7863
--- /dev/null
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -0,0 +1,192 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/qe_io.c
+ *
+ * QE Parallel I/O ports configuration routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/qe.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#undef DEBUG
+
+static struct qe_pio_regs __iomem *par_io;
+static int num_par_io_ports = 0;
+
+int par_io_init(struct device_node *np)
+{
+	struct resource res;
+	int ret;
+	const u32 *num_ports;
+
+	/* Map Parallel I/O ports registers */
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
+	par_io = ioremap(res.start, resource_size(&res));
+
+	num_ports = of_get_property(np, "num-ports", NULL);
+	if (num_ports)
+		num_par_io_ports = *num_ports;
+
+	return 0;
+}
+
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+			 int open_drain, int assignment, int has_irq)
+{
+	u32 pin_mask1bit;
+	u32 pin_mask2bits;
+	u32 new_mask2bits;
+	u32 tmp_val;
+
+	/* calculate pin location for single and 2 bits information */
+	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
+
+	/* Set open drain, if required */
+	tmp_val = in_be32(&par_io->cpodr);
+	if (open_drain)
+		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+	else
+		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+
+	/* define direction */
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cpdir2) :
+		in_be32(&par_io->cpdir1);
+
+	/* get all bits mask for 2 bit per port */
+	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+	/* Get the final mask we need for the right definition */
+	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
+
+	/* clear and set 2 bits mask */
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cpdir2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io->cpdir1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+	}
+	/* define pin assignment */
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cppar2) :
+		in_be32(&par_io->cppar1);
+
+	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+			(pin % (QE_PIO_PINS / 2) + 1) * 2));
+	/* clear and set 2 bits mask */
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cppar2,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+	} else {
+		out_be32(&par_io->cppar1,
+			 ~pin_mask2bits & tmp_val);
+		tmp_val &= ~pin_mask2bits;
+		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+	}
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	if (!par_io || port >= num_par_io_ports)
+		return -EINVAL;
+
+	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+			    has_irq);
+	return 0;
+}
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+	u32 pin_mask, tmp_val;
+
+	if (port >= num_par_io_ports)
+		return -EINVAL;
+	if (pin >= QE_PIO_PINS)
+		return -EINVAL;
+	/* calculate pin location */
+	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
+
+	tmp_val = in_be32(&par_io[port].cpdata);
+
+	if (val == 0)		/* clear */
+		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+	else			/* set */
+		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+
+	return 0;
+}
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+	struct device_node *pio;
+	const phandle *ph;
+	int pio_map_len;
+	const unsigned int *pio_map;
+
+	if (par_io == NULL) {
+		printk(KERN_ERR "par_io not initialized\n");
+		return -1;
+	}
+
+	ph = of_get_property(np, "pio-handle", NULL);
+	if (ph == NULL) {
+		printk(KERN_ERR "pio-handle not available\n");
+		return -1;
+	}
+
+	pio = of_find_node_by_phandle(*ph);
+
+	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
+	if (pio_map == NULL) {
+		printk(KERN_ERR "pio-map is not set!\n");
+		return -1;
+	}
+	pio_map_len /= sizeof(unsigned int);
+	if ((pio_map_len % 6) != 0) {
+		printk(KERN_ERR "pio-map format wrong!\n");
+		return -1;
+	}
+
+	while (pio_map_len > 0) {
+		par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+				(int) pio_map[2], (int) pio_map[3],
+				(int) pio_map[4], (int) pio_map[5]);
+		pio_map += 6;
+		pio_map_len -= 6;
+	}
+	of_node_put(pio);
+	return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
new file mode 100644
index 000000000000..b59d3358f9bd
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -0,0 +1,212 @@
+/*
+ * arch/powerpc/sysdev/qe_lib/ucc.c
+ *
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/stddef.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/ucc.h>
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
+{
+	unsigned long flags;
+
+	if (ucc_num > UCC_MAX_NUM - 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&cmxgcr_lock, flags);
+	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
+
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
+{
+	u8 __iomem *guemr;
+
+	/* The GUEMR register is at the same location for both slow and fast
+	   devices, so we just use uccX.slow.guemr. */
+	switch (ucc_num) {
+	case 0: guemr = &qe_immr->ucc1.slow.guemr;
+		break;
+	case 1: guemr = &qe_immr->ucc2.slow.guemr;
+		break;
+	case 2: guemr = &qe_immr->ucc3.slow.guemr;
+		break;
+	case 3: guemr = &qe_immr->ucc4.slow.guemr;
+		break;
+	case 4: guemr = &qe_immr->ucc5.slow.guemr;
+		break;
+	case 5: guemr = &qe_immr->ucc6.slow.guemr;
+		break;
+	case 6: guemr = &qe_immr->ucc7.slow.guemr;
+		break;
+	case 7: guemr = &qe_immr->ucc8.slow.guemr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+		UCC_GUEMR_SET_RESERVED3 | speed);
+
+	return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
+	unsigned int *reg_num, unsigned int *shift)
+{
+	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+	*reg_num = cmx + 1;
+	*cmxucr = &qe_immr->qmx.cmxucr[cmx];
+	*shift = 16 - 8 * (ucc_num & 2);
+}
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
+{
+	__be32 __iomem *cmxucr;
+	unsigned int reg_num;
+	unsigned int shift;
+
+	/* check if the UCC number is in range. */
+	if (ucc_num > UCC_MAX_NUM - 1)
+		return -EINVAL;
+
+	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
+
+	if (set)
+		setbits32(cmxucr, mask << shift);
+	else
+		clrbits32(cmxucr, mask << shift);
+
+	return 0;
+}
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode)
+{
+	__be32 __iomem *cmxucr;
+	unsigned int reg_num;
+	unsigned int shift;
+	u32 clock_bits = 0;
+
+	/* check if the UCC number is in range. */
+	if (ucc_num > UCC_MAX_NUM - 1)
+		return -EINVAL;
+
+	/* The communications direction must be RX or TX */
+	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
+		return -EINVAL;
+
+	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
+
+	switch (reg_num) {
+	case 1:
+		switch (clock) {
+		case QE_BRG1:	clock_bits = 1; break;
+		case QE_BRG2:	clock_bits = 2; break;
+		case QE_BRG7:	clock_bits = 3; break;
+		case QE_BRG8:	clock_bits = 4; break;
+		case QE_CLK9:	clock_bits = 5; break;
+		case QE_CLK10:	clock_bits = 6; break;
+		case QE_CLK11:	clock_bits = 7; break;
+		case QE_CLK12:	clock_bits = 8; break;
+		case QE_CLK15:	clock_bits = 9; break;
+		case QE_CLK16:	clock_bits = 10; break;
+		default: break;
+		}
+		break;
+	case 2:
+		switch (clock) {
+		case QE_BRG5:	clock_bits = 1; break;
+		case QE_BRG6:	clock_bits = 2; break;
+		case QE_BRG7:	clock_bits = 3; break;
+		case QE_BRG8:	clock_bits = 4; break;
+		case QE_CLK13:	clock_bits = 5; break;
+		case QE_CLK14:	clock_bits = 6; break;
+		case QE_CLK19:	clock_bits = 7; break;
+		case QE_CLK20:	clock_bits = 8; break;
+		case QE_CLK15:	clock_bits = 9; break;
+		case QE_CLK16:	clock_bits = 10; break;
+		default: break;
+		}
+		break;
+	case 3:
+		switch (clock) {
+		case QE_BRG9:	clock_bits = 1; break;
+		case QE_BRG10:	clock_bits = 2; break;
+		case QE_BRG15:	clock_bits = 3; break;
+		case QE_BRG16:	clock_bits = 4; break;
+		case QE_CLK3:	clock_bits = 5; break;
+		case QE_CLK4:	clock_bits = 6; break;
+		case QE_CLK17:	clock_bits = 7; break;
+		case QE_CLK18:	clock_bits = 8; break;
+		case QE_CLK7:	clock_bits = 9; break;
+		case QE_CLK8:	clock_bits = 10; break;
+		case QE_CLK16:	clock_bits = 11; break;
+		default: break;
+		}
+		break;
+	case 4:
+		switch (clock) {
+		case QE_BRG13:	clock_bits = 1; break;
+		case QE_BRG14:	clock_bits = 2; break;
+		case QE_BRG15:	clock_bits = 3; break;
+		case QE_BRG16:	clock_bits = 4; break;
+		case QE_CLK5:	clock_bits = 5; break;
+		case QE_CLK6:	clock_bits = 6; break;
+		case QE_CLK21:	clock_bits = 7; break;
+		case QE_CLK22:	clock_bits = 8; break;
+		case QE_CLK7:	clock_bits = 9; break;
+		case QE_CLK8:	clock_bits = 10; break;
+		case QE_CLK16:	clock_bits = 11; break;
+		default: break;
+		}
+		break;
+	default: break;
+	}
+
+	/* Check for invalid combination of clock and UCC number */
+	if (!clock_bits)
+		return -ENOENT;
+
+	if (mode == COMM_DIR_RX)
+		shift += 4;
+
+	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+		clock_bits << shift);
+
+	return 0;
+}
diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
new file mode 100644
index 000000000000..a7689310fe40
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_fast.h>
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
+{
+	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
+		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
+		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+}
+EXPORT_SYMBOL(ucc_fast_dump_regs);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+	switch (uccf_num) {
+	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+	default: return QE_CR_SUBBLOCK_INVALID;
+	}
+}
+EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
+
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
+{
+	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
+
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+	struct ucc_fast __iomem *uf_regs;
+	u32 gumr;
+
+	uf_regs = uccf->uf_regs;
+
+	/* Enable reception and/or transmission on this UCC. */
+	gumr = in_be32(&uf_regs->gumr);
+	if (mode & COMM_DIR_TX) {
+		gumr |= UCC_FAST_GUMR_ENT;
+		uccf->enabled_tx = 1;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr |= UCC_FAST_GUMR_ENR;
+		uccf->enabled_rx = 1;
+	}
+	out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_enable);
+
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
+{
+	struct ucc_fast __iomem *uf_regs;
+	u32 gumr;
+
+	uf_regs = uccf->uf_regs;
+
+	/* Disable reception and/or transmission on this UCC. */
+	gumr = in_be32(&uf_regs->gumr);
+	if (mode & COMM_DIR_TX) {
+		gumr &= ~UCC_FAST_GUMR_ENT;
+		uccf->enabled_tx = 0;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr &= ~UCC_FAST_GUMR_ENR;
+		uccf->enabled_rx = 0;
+	}
+	out_be32(&uf_regs->gumr, gumr);
+}
+EXPORT_SYMBOL(ucc_fast_disable);
+
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
+{
+	struct ucc_fast_private *uccf;
+	struct ucc_fast __iomem *uf_regs;
+	u32 gumr;
+	int ret;
+
+	if (!uf_info)
+		return -EINVAL;
+
+	/* check if the UCC port number is in range. */
+	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Check that 'max_rx_buf_length' is properly aligned (4). */
+	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	/* Validate Virtual Fifo register values */
+	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+		printk(KERN_ERR "%s: urfs is too small\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
+		return -EINVAL;
+	}
+
+	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
+		return -EINVAL;
+	}
+
+	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+	if (!uccf) {
+		printk(KERN_ERR "%s: Cannot allocate private data\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Fill fast UCC structure */
+	uccf->uf_info = uf_info;
+	/* Set the PHY base address */
+	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
+	if (uccf->uf_regs == NULL) {
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccf);
+		return -ENOMEM;
+	}
+
+	uccf->enabled_tx = 0;
+	uccf->enabled_rx = 0;
+	uccf->stopped_tx = 0;
+	uccf->stopped_rx = 0;
+	uf_regs = uccf->uf_regs;
+	uccf->p_ucce = &uf_regs->ucce;
+	uccf->p_uccm = &uf_regs->uccm;
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	uccf->p_utodr = &uf_regs->utodr;
+#endif
+#ifdef STATISTICS
+	uccf->tx_frames = 0;
+	uccf->rx_frames = 0;
+	uccf->rx_discarded = 0;
+#endif				/* STATISTICS */
+
+	/* Set UCC to fast type */
+	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+	if (ret) {
+		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
+		ucc_fast_free(uccf);
+		return ret;
+	}
+
+	uccf->mrblr = uf_info->max_rx_buf_length;
+
+	/* Set GUMR */
+	/* For more details see the hardware spec. */
+	gumr = uf_info->ttx_trx;
+	if (uf_info->tci)
+		gumr |= UCC_FAST_GUMR_TCI;
+	if (uf_info->cdp)
+		gumr |= UCC_FAST_GUMR_CDP;
+	if (uf_info->ctsp)
+		gumr |= UCC_FAST_GUMR_CTSP;
+	if (uf_info->cds)
+		gumr |= UCC_FAST_GUMR_CDS;
+	if (uf_info->ctss)
+		gumr |= UCC_FAST_GUMR_CTSS;
+	if (uf_info->txsy)
+		gumr |= UCC_FAST_GUMR_TXSY;
+	if (uf_info->rsyn)
+		gumr |= UCC_FAST_GUMR_RSYN;
+	gumr |= uf_info->synl;
+	if (uf_info->rtsm)
+		gumr |= UCC_FAST_GUMR_RTSM;
+	gumr |= uf_info->renc;
+	if (uf_info->revd)
+		gumr |= UCC_FAST_GUMR_REVD;
+	gumr |= uf_info->tenc;
+	gumr |= uf_info->tcrc;
+	gumr |= uf_info->mode;
+	out_be32(&uf_regs->gumr, gumr);
+
+	/* Allocate memory for Tx Virtual Fifo */
+	uccf->ucc_fast_tx_virtual_fifo_base_offset =
+	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+			__func__);
+		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+		ucc_fast_free(uccf);
+		return -ENOMEM;
+	}
+
+	/* Allocate memory for Rx Virtual Fifo */
+	uccf->ucc_fast_rx_virtual_fifo_base_offset =
+		qe_muram_alloc(uf_info->urfs +
+			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+			__func__);
+		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+		ucc_fast_free(uccf);
+		return -ENOMEM;
+	}
+
+	/* Set Virtual Fifo registers */
+	out_be16(&uf_regs->urfs, uf_info->urfs);
+	out_be16(&uf_regs->urfet, uf_info->urfet);
+	out_be16(&uf_regs->urfset, uf_info->urfset);
+	out_be16(&uf_regs->utfs, uf_info->utfs);
+	out_be16(&uf_regs->utfet, uf_info->utfet);
+	out_be16(&uf_regs->utftt, uf_info->utftt);
+	/* utfb, urfb are offsets from MURAM base */
+	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+	/* Mux clocking */
+	/* Grant Support */
+	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+	/* Breakpoint Support */
+	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+	/* Set Tsa or NMSI mode. */
+	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+	/* If NMSI (not Tsa), set Tx and Rx clock. */
+	if (!uf_info->tsa) {
+		/* Rx clock routing */
+		if ((uf_info->rx_clock != QE_CLK_NONE) &&
+		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+					COMM_DIR_RX)) {
+			printk(KERN_ERR "%s: illegal value for RX clock\n",
+			       __func__);
+			ucc_fast_free(uccf);
+			return -EINVAL;
+		}
+		/* Tx clock routing */
+		if ((uf_info->tx_clock != QE_CLK_NONE) &&
+		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+					COMM_DIR_TX)) {
+			printk(KERN_ERR "%s: illegal value for TX clock\n",
+			       __func__);
+			ucc_fast_free(uccf);
+			return -EINVAL;
+		}
+	}
+
+	/* Set interrupt mask register at UCC level. */
+	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+	/* First, clear anything pending at UCC level,
+	 * otherwise, old garbage may come through
+	 * as soon as the dam is opened. */
+
+	/* Writing '1' clears */
+	out_be32(&uf_regs->ucce, 0xffffffff);
+
+	*uccf_ret = uccf;
+	return 0;
+}
+EXPORT_SYMBOL(ucc_fast_init);
+
+void ucc_fast_free(struct ucc_fast_private * uccf)
+{
+	if (!uccf)
+		return;
+
+	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+	if (uccf->uf_regs)
+		iounmap(uccf->uf_regs);
+
+	kfree(uccf);
+}
+EXPORT_SYMBOL(ucc_fast_free);
diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c
new file mode 100644
index 000000000000..9334bdbd9b30
--- /dev/null
+++ b/drivers/soc/fsl/qe/ucc_slow.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+#include <soc/fsl/qe/ucc.h>
+#include <soc/fsl/qe/ucc_slow.h>
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+	switch (uccs_num) {
+	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
+	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
+	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
+	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
+	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
+	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
+	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
+	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
+	default: return QE_CR_SUBBLOCK_INVALID;
+	}
+}
+EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
+
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
+			 QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
+
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_stop_tx);
+
+void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
+{
+	struct ucc_slow_info *us_info = uccs->us_info;
+	u32 id;
+
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+EXPORT_SYMBOL(ucc_slow_restart_tx);
+
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+	struct ucc_slow *us_regs;
+	u32 gumr_l;
+
+	us_regs = uccs->us_regs;
+
+	/* Enable reception and/or transmission on this UCC. */
+	gumr_l = in_be32(&us_regs->gumr_l);
+	if (mode & COMM_DIR_TX) {
+		gumr_l |= UCC_SLOW_GUMR_L_ENT;
+		uccs->enabled_tx = 1;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr_l |= UCC_SLOW_GUMR_L_ENR;
+		uccs->enabled_rx = 1;
+	}
+	out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_enable);
+
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
+{
+	struct ucc_slow *us_regs;
+	u32 gumr_l;
+
+	us_regs = uccs->us_regs;
+
+	/* Disable reception and/or transmission on this UCC. */
+	gumr_l = in_be32(&us_regs->gumr_l);
+	if (mode & COMM_DIR_TX) {
+		gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+		uccs->enabled_tx = 0;
+	}
+	if (mode & COMM_DIR_RX) {
+		gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+		uccs->enabled_rx = 0;
+	}
+	out_be32(&us_regs->gumr_l, gumr_l);
+}
+EXPORT_SYMBOL(ucc_slow_disable);
+
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
+{
+	struct ucc_slow_private *uccs;
+	u32 i;
+	struct ucc_slow __iomem *us_regs;
+	u32 gumr;
+	struct qe_bd *bd;
+	u32 id;
+	u32 command;
+	int ret = 0;
+
+	if (!us_info)
+		return -EINVAL;
+
+	/* check if the UCC port number is in range. */
+	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Set mrblr
+	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
+	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+	 * case when QE accepts 32 bits at a time.
+	 */
+	if ((!us_info->rfw) &&
+		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+		printk(KERN_ERR "max_rx_buf_length not aligned.\n");
+		return -EINVAL;
+	}
+
+	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+	if (!uccs) {
+		printk(KERN_ERR "%s: Cannot allocate private data\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Fill slow UCC structure */
+	uccs->us_info = us_info;
+	/* Set the PHY base address */
+	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+	if (uccs->us_regs == NULL) {
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccs);
+		return -ENOMEM;
+	}
+
+	uccs->saved_uccm = 0;
+	uccs->p_rx_frame = 0;
+	us_regs = uccs->us_regs;
+	uccs->p_ucce = (u16 *) & (us_regs->ucce);
+	uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+	uccs->rx_frames = 0;
+	uccs->tx_frames = 0;
+	uccs->rx_discarded = 0;
+#endif				/* STATISTICS */
+
+	/* Get PRAM base */
+	uccs->us_pram_offset =
+		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
+		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
+		     uccs->us_pram_offset);
+
+	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+	/* Set UCC to slow type */
+	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+	if (ret) {
+		printk(KERN_ERR "%s: cannot set UCC type", __func__);
+		ucc_slow_free(uccs);
+		return ret;
+	}
+
+	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+	INIT_LIST_HEAD(&uccs->confQ);
+
+	/* Allocate BDs. */
+	uccs->rx_base_offset =
+		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+				QE_ALIGNMENT_OF_BD);
+	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
+		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
+			us_info->rx_bd_ring_len);
+		uccs->rx_base_offset = 0;
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+
+	uccs->tx_base_offset =
+		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+			QE_ALIGNMENT_OF_BD);
+	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
+		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
+		uccs->tx_base_offset = 0;
+		ucc_slow_free(uccs);
+		return -ENOMEM;
+	}
+
+	/* Init Tx bds */
+	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
+		/* clear bd buffer */
+		out_be32(&bd->buf, 0);
+		/* set bd status and length */
+		out_be32((u32 *) bd, 0);
+		bd++;
+	}
+	/* for last BD set Wrap bit */
+	out_be32(&bd->buf, 0);
+	out_be32((u32 *) bd, cpu_to_be32(T_W));
+
+	/* Init Rx bds */
+	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
+		/* set bd status and length */
+		out_be32((u32*)bd, 0);
+		/* clear bd buffer */
+		out_be32(&bd->buf, 0);
+		bd++;
+	}
+	/* for last BD set Wrap bit */
+	out_be32((u32*)bd, cpu_to_be32(R_W));
+	out_be32(&bd->buf, 0);
+
+	/* Set GUMR (For more details see the hardware spec.). */
+	/* gumr_h */
+	gumr = us_info->tcrc;
+	if (us_info->cdp)
+		gumr |= UCC_SLOW_GUMR_H_CDP;
+	if (us_info->ctsp)
+		gumr |= UCC_SLOW_GUMR_H_CTSP;
+	if (us_info->cds)
+		gumr |= UCC_SLOW_GUMR_H_CDS;
+	if (us_info->ctss)
+		gumr |= UCC_SLOW_GUMR_H_CTSS;
+	if (us_info->tfl)
+		gumr |= UCC_SLOW_GUMR_H_TFL;
+	if (us_info->rfw)
+		gumr |= UCC_SLOW_GUMR_H_RFW;
+	if (us_info->txsy)
+		gumr |= UCC_SLOW_GUMR_H_TXSY;
+	if (us_info->rtsm)
+		gumr |= UCC_SLOW_GUMR_H_RTSM;
+	out_be32(&us_regs->gumr_h, gumr);
+
+	/* gumr_l */
+	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+		us_info->diag | us_info->mode;
+	if (us_info->tci)
+		gumr |= UCC_SLOW_GUMR_L_TCI;
+	if (us_info->rinv)
+		gumr |= UCC_SLOW_GUMR_L_RINV;
+	if (us_info->tinv)
+		gumr |= UCC_SLOW_GUMR_L_TINV;
+	if (us_info->tend)
+		gumr |= UCC_SLOW_GUMR_L_TEND;
+	out_be32(&us_regs->gumr_l, gumr);
+
+	/* Function code registers */
+
+	/* if the data is in cachable memory, the 'global' */
+	/* in the function code should be set. */
+	uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+	uccs->us_pram->rbmr = UCC_BMR_BO_BE;
+
+	/* rbase, tbase are offsets from MURAM base */
+	out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+	out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
+
+	/* Mux clocking */
+	/* Grant Support */
+	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+	/* Breakpoint Support */
+	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+	/* Set Tsa or NMSI mode. */
+	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+	/* If NMSI (not Tsa), set Tx and Rx clock. */
+	if (!us_info->tsa) {
+		/* Rx clock routing */
+		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+					COMM_DIR_RX)) {
+			printk(KERN_ERR "%s: illegal value for RX clock\n",
+			       __func__);
+			ucc_slow_free(uccs);
+			return -EINVAL;
+		}
+		/* Tx clock routing */
+		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+					COMM_DIR_TX)) {
+			printk(KERN_ERR "%s: illegal value for TX clock\n",
+			       __func__);
+			ucc_slow_free(uccs);
+			return -EINVAL;
+		}
+	}
+
+	/* Set interrupt mask register at UCC level. */
+	out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+	/* First, clear anything pending at UCC level,
+	 * otherwise, old garbage may come through
+	 * as soon as the dam is opened. */
+
+	/* Writing '1' clears */
+	out_be16(&us_regs->ucce, 0xffff);
+
+	/* Issue QE Init command */
+	if (us_info->init_tx && us_info->init_rx)
+		command = QE_INIT_TX_RX;
+	else if (us_info->init_tx)
+		command = QE_INIT_TX;
+	else
+		command = QE_INIT_RX;	/* We know at least one is TRUE */
+
+	qe_issue_cmd(command, id, us_info->protocol, 0);
+
+	*uccs_ret = uccs;
+	return 0;
+}
+EXPORT_SYMBOL(ucc_slow_init);
+
+void ucc_slow_free(struct ucc_slow_private * uccs)
+{
+	if (!uccs)
+		return;
+
+	if (uccs->rx_base_offset)
+		qe_muram_free(uccs->rx_base_offset);
+
+	if (uccs->tx_base_offset)
+		qe_muram_free(uccs->tx_base_offset);
+
+	if (uccs->us_pram)
+		qe_muram_free(uccs->us_pram_offset);
+
+	if (uccs->us_regs)
+		iounmap(uccs->us_regs);
+
+	kfree(uccs);
+}
+EXPORT_SYMBOL(ucc_slow_free);
+
diff --git a/drivers/soc/fsl/qe/usb.c b/drivers/soc/fsl/qe/usb.c
new file mode 100644
index 000000000000..111f7ab80f04
--- /dev/null
+++ b/drivers/soc/fsl/qe/usb.c
@@ -0,0 +1,56 @@
+/*
+ * QE USB routines
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <soc/fsl/qe/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+	struct qe_mux __iomem *mux = &qe_immr->qmx;
+	unsigned long flags;
+	u32 val;
+
+	switch (clk) {
+	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
+	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
+	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
+	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
+	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
+	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+	default:
+		pr_err("%s: requested unknown clock %d\n", __func__, clk);
+		return -EINVAL;
+	}
+
+	if (qe_clock_is_brg(clk))
+		qe_setbrg(clk, rate, 1);
+
+	spin_lock_irqsave(&cmxgcr_lock, flags);
+
+	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
index 896add8cfd3b..8f7b26ec181e 100644
--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -16,7 +16,7 @@
  * option) any later version.
  */
 #include <asm/cpm.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/qe.h>
 #include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/kernel.h>
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 73190f5d2832..1a7dc3c590b1 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -31,7 +31,7 @@
 #include <linux/dma-mapping.h>
 
 #include <linux/fs_uart_pd.h>
-#include <asm/ucc_slow.h>
+#include <soc/fsl/qe/ucc_slow.h>
 
 #include <linux/firmware.h>
 #include <asm/reg.h>
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 5fb6f8b4f0b4..53c0692f1b09 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -38,7 +38,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/qe.h>
 #include <asm/cpm.h>
 #include <asm/dma.h>
 #include <asm/reg.h>
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index c6cebb96fd21..0960f41f945a 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -31,7 +31,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/qe.h>
 #include <asm/fsl_gtm.h>
 #include "fhci.h"
 
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 3bacdd7befe9..60d55eb3de0d 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -24,7 +24,7 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/gpio.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/qe.h>
 #include "fhci.h"
 
 /* virtual root hub specific descriptor */
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 95ca5986e672..a9609a336efe 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -25,7 +25,7 @@
 #include <linux/io.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <asm/qe.h>
+#include <soc/fsl/qe/qe.h>
 #include <asm/fsl_gtm.h>
 #include "fhci.h"
 
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 154e6a007727..3fc82c1c3c73 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -27,8 +27,8 @@
 #include <linux/io.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <asm/qe.h>
-#include <asm/immap_qe.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/immap_qe.h>
 
 #define USB_CLOCK	48000000