[media] lirc: lirc_ene0100.h is not referenced anywhere

There is a proper ene0100 driver anyway.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 169 deletions

diff --git a/drivers/staging/media/lirc/lirc_ene0100.h b/drivers/staging/media/lirc/lirc_ene0100.h
deleted file mode 100644
index 06bebd6acc46..000000000000
--- a/drivers/staging/media/lirc/lirc_ene0100.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-/* hardware address */
-#define ENE_STATUS		0	 /* hardware status - unused */
-#define ENE_ADDR_HI		1	 /* hi byte of register address */
-#define ENE_ADDR_LO		2	 /* low byte of register address */
-#define ENE_IO			3	 /* read/write window */
-#define ENE_MAX_IO		4
-
-/* 8 bytes of samples, divided in 2 halfs*/
-#define ENE_SAMPLE_BUFFER	0xF8F0	 /* regular sample buffer */
-#define ENE_SAMPLE_SPC_MASK	(1 << 7) /* sample is space */
-#define ENE_SAMPLE_VALUE_MASK	0x7F
-#define ENE_SAMPLE_OVERFLOW	0x7F
-#define ENE_SAMPLES_SIZE	4
-
-/* fan input sample buffer */
-#define ENE_SAMPLE_BUFFER_FAN	0xF8FB	 /* this buffer holds high byte of */
-					 /* each sample of normal buffer */
-
-#define ENE_FAN_SMPL_PULS_MSK	0x8000	 /* this bit of combined sample */
-					 /* if set, says that sample is pulse */
-#define ENE_FAN_VALUE_MASK	0x0FFF   /* mask for valid bits of the value */
-
-/* first firmware register */
-#define ENE_FW1			0xF8F8
-#define	ENE_FW1_ENABLE		(1 << 0) /* enable fw processing */
-#define ENE_FW1_TXIRQ		(1 << 1) /* TX interrupt pending */
-#define ENE_FW1_WAKE		(1 << 6) /* enable wake from S3 */
-#define ENE_FW1_IRQ		(1 << 7) /* enable interrupt */
-
-/* second firmware register */
-#define ENE_FW2			0xF8F9
-#define ENE_FW2_BUF_HIGH	(1 << 0) /* which half of the buffer to read */
-#define ENE_FW2_IRQ_CLR		(1 << 2) /* clear this on IRQ */
-#define ENE_FW2_GP40_AS_LEARN	(1 << 4) /* normal input is used as */
-					 /* learning input */
-#define ENE_FW2_FAN_AS_NRML_IN	(1 << 6) /* fan is used as normal input */
-#define ENE_FW2_LEARNING	(1 << 7) /* hardware supports learning and TX */
-
-/* fan as input settings - only if learning capable */
-#define ENE_FAN_AS_IN1		0xFE30   /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN	0xCD
-#define ENE_FAN_AS_IN2		0xFE31   /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN	0x03
-#define ENE_SAMPLE_PERIOD_FAN   61	 /* fan input has fixed sample period */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ		0xFD09	 /* IRQ number */
-#define ENEB_IRQ_UNK1		0xFD17	 /* unknown setting = 1 */
-#define ENEB_IRQ_STATUS		0xFD80	 /* irq status */
-#define ENEB_IRQ_STATUS_IR	(1 << 5) /* IR irq */
-
-/* IRQ registers block (for revision C,D) */
-#define ENEC_IRQ		0xFE9B	 /* new irq settings register */
-#define ENEC_IRQ_MASK		0x0F	 /* irq number mask */
-#define ENEC_IRQ_UNK_EN		(1 << 4) /* always enabled */
-#define ENEC_IRQ_STATUS		(1 << 5) /* irq status and ACK */
-
-/* CIR block settings */
-#define ENE_CIR_CONF1		0xFEC0
-#define ENE_CIR_CONF1_ADC_ON	0x7	 /* receiver on gpio40 enabled */
-#define ENE_CIR_CONF1_LEARN1	(1 << 3) /* enabled on learning mode */
-#define ENE_CIR_CONF1_TX_ON	0x30	 /* enabled on transmit */
-#define ENE_CIR_CONF1_TX_CARR	(1 << 7) /* send TX carrier or not */
-
-#define ENE_CIR_CONF2		0xFEC1	 /* unknown setting = 0 */
-#define ENE_CIR_CONF2_LEARN2	(1 << 4) /* set on enable learning */
-#define ENE_CIR_CONF2_GPIO40DIS	(1 << 5) /* disable normal input via gpio40 */
-
-#define ENE_CIR_SAMPLE_PERIOD	0xFEC8	 /* sample period in us */
-#define ENE_CIR_SAMPLE_OVERFLOW	(1 << 7) /* interrupt on overflows if set */
-
-
-/* transmitter - not implemented yet */
-/* KB3926C and higher */
-/* transmission is very similar to receiving, a byte is written to */
-/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
-/* sample period is fixed*/
-
-
-/* transmitter ports */
-#define ENE_TX_PORT1		0xFC01	 /* this enables one or both */
-#define ENE_TX_PORT1_EN		(1 << 5) /* TX ports */
-#define ENE_TX_PORT2		0xFC08
-#define ENE_TX_PORT2_EN		(1 << 1)
-
-#define ENE_TX_INPUT		0xFEC9	 /* next byte to transmit */
-#define ENE_TX_SPC_MASK		(1 << 7) /* Transmitted sample is space */
-#define ENE_TX_UNK1		0xFECB	 /* set to 0x63 */
-#define ENE_TX_SMPL_PERIOD	50	 /* transmit sample period */
-
-
-#define ENE_TX_CARRIER		0xFECE	 /* TX carrier * 2 (khz) */
-#define ENE_TX_CARRIER_UNKBIT	0x80	 /* This bit set on transmit */
-#define ENE_TX_CARRIER_LOW	0xFECF	 /* TX carrier / 2 */
-
-/* Hardware versions */
-#define ENE_HW_VERSION		0xFF00	 /* hardware revision */
-#define ENE_HW_UNK		0xFF1D
-#define ENE_HW_UNK_CLR		(1 << 2)
-#define ENE_HW_VER_MAJOR	0xFF1E	 /* chip version */
-#define ENE_HW_VER_MINOR	0xFF1F
-#define ENE_HW_VER_OLD		0xFD00
-
-#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
-
-#define ENE_DRIVER_NAME		"enecir"
-#define ENE_MAXGAP		250000	 /* this is amount of time we wait
-					 before turning the sampler, chosen
-					 arbitry */
-
-#define space(len)	       (-(len))	 /* add a space */
-
-/* software defines */
-#define ENE_IRQ_RX		1
-#define ENE_IRQ_TX		2
-
-#define  ENE_HW_B		1	/* 3926B */
-#define  ENE_HW_C		2	/* 3926C */
-#define  ENE_HW_D		3	/* 3926D */
-
-#define ene_printk(level, text, ...) \
-	printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
-
-struct ene_device {
-	struct pnp_dev *pnp_dev;
-	struct lirc_driver *lirc_driver;
-
-	/* hw settings */
-	unsigned long hw_io;
-	int irq;
-
-	int hw_revision;			/* hardware revision */
-	int hw_learning_and_tx_capable;		/* learning capable */
-	int hw_gpio40_learning;			/* gpio40 is learning */
-	int hw_fan_as_normal_input;	/* fan input is used as regular input */
-
-	/* device data */
-	int idle;
-	int fan_input_inuse;
-
-	int sample;
-	int in_use;
-
-	struct timeval gap_start;
-};