drm/kms-core: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Review from Eric.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch

11 files changed, 70 insertions, 74 deletions

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 6414bcf7f41b..7fd88a09304b 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -195,8 +195,8 @@ EXPORT_SYMBOL(drm_atomic_state_default_clear);
  * all locks. So someone else could sneak in and change the current modeset
  * configuration. Which means that all the state assembled in @state is no
  * longer an atomic update to the current state, but to some arbitrary earlier
- * state. Which could break assumptions the driver's ->atomic_check likely
- * relies on.
+ * state. Which could break assumptions the driver's
+ * &drm_mode_config_funcs.atomic_check likely relies on.
  *
  * Hence we must clear all cached state and completely start over, using this
  * function.
@@ -456,11 +456,10 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc,
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling crtc->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -532,10 +531,10 @@ EXPORT_SYMBOL(drm_atomic_crtc_set_property);
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_crtc_funcs.atomic_get_property for driver properties. To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -716,11 +715,10 @@ EXPORT_SYMBOL(drm_atomic_get_plane_state);
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling plane->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_plane_funcs.atomic_set_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -791,10 +789,10 @@ EXPORT_SYMBOL(drm_atomic_plane_set_property);
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_plane_funcs.atomic_get_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1057,11 +1055,10 @@ EXPORT_SYMBOL(drm_atomic_get_connector_state);
  * @property: the property to set
  * @val: the new property value
  *
- * Use this instead of calling connector->atomic_set_property directly.
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_set_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_connector_funcs.atomic_set_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1136,10 +1133,10 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
  * @property: the property to set
  * @val: return location for the property value
  *
- * This function handles generic/core properties and calls out to
- * driver's ->atomic_get_property() for driver properties.  To ensure
- * consistent behavior you must call this function rather than the
- * driver hook directly.
+ * This function handles generic/core properties and calls out to driver's
+ * &drm_connector_funcs.atomic_get_property for driver properties.  To ensure
+ * consistent behavior you must call this function rather than the driver hook
+ * directly.
  *
  * RETURNS:
  * Zero on success, error code on failure
@@ -1312,12 +1309,11 @@ EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
  * implicit or explicit fencing.
  *
  * This function will not set the fence to the state if it was set
- * via explicit fencing interfaces on the atomic ioctl. It will
- * all drope the reference to the fence as we not storing it
- * anywhere.
- *
- * Otherwise, if plane_state->fence is not set this function we
- * just set it with the received implict fence.
+ * via explicit fencing interfaces on the atomic ioctl. In that case it will
+ * drop the reference to the fence as we are not storing it anywhere.
+ * Otherwise, if &drm_plane_state.fence is not set this function we just set it
+ * with the received implicit fence. In both cases this function consumes a
+ * reference for @fence.
  */
 void
 drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
@@ -1616,7 +1612,7 @@ int drm_atomic_commit(struct drm_atomic_state *state)
 EXPORT_SYMBOL(drm_atomic_commit);
 
 /**
- * drm_atomic_nonblocking_commit - atomic&nonblocking configuration commit
+ * drm_atomic_nonblocking_commit - atomic nonblocking commit
  * @state: atomic configuration to check
  *
  * Note that this function can return -EDEADLK if the driver needed to acquire
@@ -1829,10 +1825,10 @@ static int atomic_set_prop(struct drm_atomic_state *state,
  * @plane_mask: plane mask for planes that were updated.
  * @ret: return value, can be -EDEADLK for a retry.
  *
- * Before doing an update plane->old_fb is set to plane->fb,
- * but before dropping the locks old_fb needs to be set to NULL
- * and plane->fb updated. This is a common operation for each
- * atomic update, so this call is split off as a helper.
+ * Before doing an update &drm_plane.old_fb is set to &drm_plane.fb, but before
+ * dropping the locks old_fb needs to be set to NULL and plane->fb updated. This
+ * is a common operation for each atomic update, so this call is split off as a
+ * helper.
  */
 void drm_atomic_clean_old_fb(struct drm_device *dev,
 			     unsigned plane_mask,
@@ -1873,7 +1869,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb);
  * As a contrast, with implicit fencing the kernel keeps track of any
  * ongoing rendering, and automatically ensures that the atomic update waits
  * for any pending rendering to complete. For shared buffers represented with
- * a &struct dma_buf this is tracked in &reservation_object structures.
+ * a &struct dma_buf this is tracked in &struct reservation_object.
  * Implicit syncing is how Linux traditionally worked (e.g. DRI2/3 on X.org),
  * whereas explicit fencing is what Android wants.
  *
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 1f2412c7ccfd..665aafc6ad68 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -40,9 +40,8 @@
  * sub-pixel accuracy, which is scaled up to a pixel-aligned destination
  * rectangle in the visible area of a &drm_crtc. The visible area of a CRTC is
  * defined by the horizontal and vertical visible pixels (stored in @hdisplay
- * and @vdisplay) of the requested mode (stored in @mode in the
- * &drm_crtc_state). These two rectangles are both stored in the
- * &drm_plane_state.
+ * and @vdisplay) of the requested mode (stored in &drm_crtc_state.mode). These
+ * two rectangles are both stored in the &drm_plane_state.
  *
  * For the atomic ioctl the following standard (atomic) properties on the plane object
  * encode the basic plane composition model:
@@ -215,7 +214,7 @@ EXPORT_SYMBOL(drm_rotation_simplify);
  * for it in drm core. Drivers can then attach this property to planes to enable
  * support for configurable planes arrangement during blending operation.
  * Once mutable zpos property has been enabled, the DRM core will automatically
- * calculate drm_plane_state->normalized_zpos values. Usually min should be set
+ * calculate &drm_plane_state.normalized_zpos values. Usually min should be set
  * to 0 and max to maximal number of planes for given crtc - 1.
  *
  * If zpos of some planes cannot be changed (like fixed background or
@@ -367,8 +366,8 @@ done:
  * For every CRTC this function checks new states of all planes assigned to
  * it and calculates normalized zpos value for these planes. Planes are compared
  * first by their zpos values, then by plane id (if zpos is equal). The plane
- * with lowest zpos value is at the bottom. The plane_state->normalized_zpos is
- * then filled with unique values from 0 to number of active planes in crtc
+ * with lowest zpos value is at the bottom. The &drm_plane_state.normalized_zpos
+ * is then filled with unique values from 0 to number of active planes in crtc
  * minus one.
  *
  * RETURNS
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 799edd0d308e..dd720d4cb4f7 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -38,8 +38,8 @@
  * Hence they are reference-counted using drm_connector_reference() and
  * drm_connector_unreference().
  *
- * KMS driver must create, initialize, register and attach at a struct
- * &drm_connector for each such sink. The instance is created as other KMS
+ * KMS driver must create, initialize, register and attach at a &struct
+ * drm_connector for each such sink. The instance is created as other KMS
  * objects and initialized by setting the following fields.
  *
  * The connector is then registered with a call to drm_connector_init() with a
@@ -49,7 +49,7 @@
  * Connectors must be attached to an encoder to be used. For devices that map
  * connectors to encoders 1:1, the connector should be attached at
  * initialization time with a call to drm_mode_connector_attach_encoder(). The
- * driver must also set the &struct drm_connector encoder field to point to the
+ * driver must also set the &drm_connector.encoder field to point to the
  * attached encoder.
  *
  * For connectors which are not fixed (like built-in panels) the driver needs to
@@ -497,7 +497,7 @@ static struct lockdep_map connector_list_iter_dep_map = {
  * @dev: DRM device
  * @iter: connector_list iterator
  *
- * Sets @iter up to walk the connector list in &drm_mode_config of @dev. @iter
+ * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
  * must always be cleaned up again by calling drm_connector_list_iter_put().
  * Iteration itself happens using drm_connector_list_iter_next() or
  * drm_for_each_connector_iter().
@@ -696,8 +696,8 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  * 	drivers this is only provided for backwards compatibility with existing
  * 	drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
  * 	connector is linked to. Drivers should never set this property directly,
- * 	it is handled by the DRM core by calling the ->dpms() callback in
- * 	&drm_connector_funcs. Atomic drivers should implement this hook using
+ * 	it is handled by the DRM core by calling the &drm_connector_funcs.dpms
+ * 	callback. Atomic drivers should implement this hook using
  * 	drm_atomic_helper_connector_dpms(). This is the only property standard
  * 	connector property that userspace can change.
  * PATH:
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index bd3c8b243447..cea7a7efa43c 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -415,11 +415,12 @@ int drm_mode_getcrtc(struct drm_device *dev,
 }
 
 /**
- * drm_mode_set_config_internal - helper to call ->set_config
+ * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
  * @set: modeset config to set
  *
- * This is a little helper to wrap internal calls to the ->set_config driver
- * interface. The only thing it adds is correct refcounting dance.
+ * This is a little helper to wrap internal calls to the
+ * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
+ * correct refcounting dance.
  *
  * Returns:
  * Zero on success, negative errno on failure.
diff --git a/drivers/gpu/drm/drm_dumb_buffers.c b/drivers/gpu/drm/drm_dumb_buffers.c
index e5c61cda4ae3..10307cc16d75 100644
--- a/drivers/gpu/drm/drm_dumb_buffers.c
+++ b/drivers/gpu/drm/drm_dumb_buffers.c
@@ -42,8 +42,8 @@
  * create dumb buffers suitable for scanout, which can then be used to create
  * KMS frame buffers.
  *
- * To support dumb objects drivers must implement the dumb_create,
- * dumb_destroy and dumb_map_offset operations from &struct drm_driver. See
+ * To support dumb objects drivers must implement the &drm_driver.dumb_create,
+ * &drm_driver.dumb_destroy and &drm_driver.dumb_map_offset operations. See
  * there for further details.
  *
  * Note that dumb objects may not be used for gpu acceleration, as has been
diff --git a/drivers/gpu/drm/drm_encoder.c b/drivers/gpu/drm/drm_encoder.c
index 487cfe3989e8..129450713bb7 100644
--- a/drivers/gpu/drm/drm_encoder.c
+++ b/drivers/gpu/drm/drm_encoder.c
@@ -98,7 +98,7 @@ void drm_encoder_unregister_all(struct drm_device *dev)
  *
  * Initialises a preallocated encoder. Encoder should be subclassed as part of
  * driver encoder objects. At driver unload time drm_encoder_cleanup() should be
- * called from the driver's destroy hook in &drm_encoder_funcs.
+ * called from the driver's &drm_encoder_funcs.destroy hook.
  *
  * Returns:
  * Zero on success, error code on failure.
diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c
index 4484785cd9ac..cf804389f5ec 100644
--- a/drivers/gpu/drm/drm_encoder_slave.c
+++ b/drivers/gpu/drm/drm_encoder_slave.c
@@ -43,7 +43,7 @@
  * &drm_encoder_slave. The @slave_funcs field will be initialized with
  * the hooks provided by the slave driver.
  *
- * If @info->platform_data is non-NULL it will be used as the initial
+ * If @info.platform_data is non-NULL it will be used as the initial
  * slave config.
  *
  * Returns 0 on success or a negative errno on failure, in particular,
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index 588ccc3a2218..28a0108a1ab8 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -58,8 +58,8 @@
  * fbdev framebuffer when the struct &struct drm_framebuffer is embedded into
  * the fbdev helper struct) drivers can manually clean up a framebuffer at
  * module unload time with drm_framebuffer_unregister_private(). But doing this
- * is not recommended, and it's better to have a normal free-standing struct
- * &drm_framebuffer.
+ * is not recommended, and it's better to have a normal free-standing &struct
+ * drm_framebuffer.
  */
 
 int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y,
@@ -470,7 +470,7 @@ int drm_mode_getfb(struct drm_device *dev,
  * usb display-link, mipi manual update panels or edp panel self refresh modes.
  *
  * Modesetting drivers which always update the frontbuffer do not need to
- * implement the corresponding ->dirty framebuffer callback.
+ * implement the corresponding &drm_framebuffer_funcs.dirty callback.
  *
  * Called by the user via ioctl.
  *
@@ -709,10 +709,10 @@ EXPORT_SYMBOL(drm_framebuffer_unregister_private);
  * @fb: framebuffer to remove
  *
  * Cleanup framebuffer. This function is intended to be used from the drivers
- * ->destroy callback. It can also be used to clean up driver private
- * framebuffers embedded into a larger structure.
+ * &drm_framebuffer_funcs.destroy callback. It can also be used to clean up
+ * driver private framebuffers embedded into a larger structure.
  *
- * Note that this function does not remove the fb from active usuage - if it is
+ * Note that this function does not remove the fb from active usage - if it is
  * still used anywhere, hilarity can ensue since userspace could call getfb on
  * the id and get back -EINVAL. Obviously no concern at driver unload time.
  *
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index 3551ae31f143..bf60f2645e55 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -33,7 +33,7 @@
  * to use &ww_mutex and acquire-contexts to avoid deadlocks.  But because
  * the locking is more distributed around the driver code, we want a bit
  * of extra utility/tracking out of our acquire-ctx.  This is provided
- * by drm_modeset_lock / drm_modeset_acquire_ctx.
+ * by &struct drm_modeset_lock and &struct drm_modeset_acquire_ctx.
  *
  * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.txt
  *
@@ -53,7 +53,7 @@
  *     drm_modeset_acquire_fini(&ctx);
  *
  * On top of of these per-object locks using &ww_mutex there's also an overall
- * dev->mode_config.lock, for protecting everything else. Mostly this means
+ * &drm_mode_config.mutex, for protecting everything else. Mostly this means
  * probe state of connectors, and preventing hotplug add/removal of connectors.
  *
  * Finally there's a bunch of dedicated locks to protect drm core internal
@@ -71,7 +71,7 @@ static DEFINE_WW_CLASS(crtc_ww_class);
  * drm_modeset_unlock_all() function.
  *
  * This function is deprecated. It allocates a lock acquisition context and
- * stores it in the DRM device's ->mode_config. This facilitate conversion of
+ * stores it in &drm_device.mode_config. This facilitate conversion of
  * existing code because it removes the need to manually deal with the
  * acquisition context, but it is also brittle because the context is global
  * and care must be taken not to nest calls. New code should use the
@@ -124,7 +124,7 @@ EXPORT_SYMBOL(drm_modeset_lock_all);
  * drm_modeset_lock_all() function.
  *
  * This function is deprecated. It uses the lock acquisition context stored
- * in the DRM device's ->mode_config. This facilitates conversion of existing
+ * in &drm_device.mode_config. This facilitates conversion of existing
  * code because it removes the need to manually deal with the acquisition
  * context, but it is also brittle because the context is global and care must
  * be taken not to nest calls. New code should pass the acquisition context
@@ -468,7 +468,7 @@ EXPORT_SYMBOL(drm_modeset_unlock);
  * This function takes all modeset locks, suitable where a more fine-grained
  * scheme isn't (yet) implemented.
  *
- * Unlike drm_modeset_lock_all(), it doesn't take the dev->mode_config.mutex
+ * Unlike drm_modeset_lock_all(), it doesn't take the &drm_mode_config.mutex
  * since that lock isn't required for modeset state changes. Callers which
  * need to grab that lock too need to do so outside of the acquire context
  * @ctx.
diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
index eed66be18329..c464fc4a874d 100644
--- a/drivers/gpu/drm/drm_plane.c
+++ b/drivers/gpu/drm/drm_plane.c
@@ -42,7 +42,7 @@
  *
  * Cursor and overlay planes are optional. All drivers should provide one
  * primary plane per CRTC to avoid surprising userspace too much. See enum
- * &drm_plane_type for a more in-depth discussion of these special uapi-relevant
+ * drm_plane_type for a more in-depth discussion of these special uapi-relevant
  * plane types. Special planes are associated with their CRTC by calling
  * drm_crtc_init_with_planes().
  *
diff --git a/drivers/gpu/drm/drm_property.c b/drivers/gpu/drm/drm_property.c
index 0d0e5dc0ee23..7fc070f3e49e 100644
--- a/drivers/gpu/drm/drm_property.c
+++ b/drivers/gpu/drm/drm_property.c
@@ -42,8 +42,8 @@
  * drm_object_attach_property().
  *
  * Property values are only 64bit. To support bigger piles of data (like gamma
- * tables, color correction matrizes or large structures) a property can instead
- * point at a &drm_property_blob with that additional data
+ * tables, color correction matrices or large structures) a property can instead
+ * point at a &drm_property_blob with that additional data.
  *
  * Properties are defined by their symbolic name, userspace must keep a
  * per-object mapping from those names to the property ID used in the atomic