Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...

8 files changed, 51 insertions, 49 deletions

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 2b847d875946..26bf37010586 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -70,7 +70,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 		/* Read again to allow register to stabilise */
 		i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
 		writeb(0, i2c->base + MPC_I2C_SR);
-		wake_up_interruptible(&i2c->queue);
+		wake_up(&i2c->queue);
 	}
 	return IRQ_HANDLED;
 }
@@ -115,13 +115,10 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 		writeb(0, i2c->base + MPC_I2C_SR);
 	} else {
 		/* Interrupt mode */
-		result = wait_event_interruptible_timeout(i2c->queue,
+		result = wait_event_timeout(i2c->queue,
 			(i2c->interrupt & CSR_MIF), timeout);
 
-		if (unlikely(result < 0)) {
-			pr_debug("I2C: wait interrupted\n");
-			writeccr(i2c, 0);
-		} else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+		if (unlikely(!(i2c->interrupt & CSR_MIF))) {
 			pr_debug("I2C: wait timeout\n");
 			writeccr(i2c, 0);
 			result = -ETIMEDOUT;
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 82607add69a9..c0621d50c8a0 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -498,8 +498,8 @@ static ssize_t store_##name(struct device *dev, struct device_attribute *attr, c
 #define BUILD_STORE_FUNC_INT(name, data)			\
 static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
 {								\
-	u32 val;						\
-	val = simple_strtoul(buf, NULL, 10);			\
+	int val;						\
+	val = simple_strtol(buf, NULL, 10);			\
 	if (val < 0 || val > 255)				\
 		return -EINVAL;					\
 	printk(KERN_INFO "Setting specified fan speed to %d\n", val);	\
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index cd8e98b45ec5..049b0a7e01f3 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -1123,9 +1123,9 @@ static int mpc52xx_fec_of_resume(struct of_device *op)
 #endif
 
 static struct of_device_id mpc52xx_fec_match[] = {
-	{ .type = "network", .compatible = "fsl,mpc5200b-fec", },
-	{ .type = "network", .compatible = "fsl,mpc5200-fec", },
-	{ .type = "network", .compatible = "mpc5200-fec", },
+	{ .compatible = "fsl,mpc5200b-fec", },
+	{ .compatible = "fsl,mpc5200-fec", },
+	{ .compatible = "mpc5200-fec", },
 	{ }
 };
 
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index 5324978b73fb..235e87fcb49f 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -838,7 +838,7 @@ static int ps3av_get_hw_conf(struct ps3av *ps3av)
 }
 
 /* set mode using id */
-int ps3av_set_video_mode(u32 id)
+int ps3av_set_video_mode(int id)
 {
 	int size;
 	u32 option;
@@ -940,7 +940,7 @@ EXPORT_SYMBOL_GPL(ps3av_audio_mute);
 static int ps3av_probe(struct ps3_system_bus_device *dev)
 {
 	int res;
-	u32 id;
+	int id;
 
 	dev_dbg(&dev->core, " -> %s:%d\n", __func__, __LINE__);
 	dev_dbg(&dev->core, "  timeout=%d\n", timeout);
@@ -962,8 +962,10 @@ static int ps3av_probe(struct ps3_system_bus_device *dev)
 	init_completion(&ps3av->done);
 	complete(&ps3av->done);
 	ps3av->wq = create_singlethread_workqueue("ps3avd");
-	if (!ps3av->wq)
+	if (!ps3av->wq) {
+		res = -ENOMEM;
 		goto fail;
+	}
 
 	switch (ps3_os_area_get_av_multi_out()) {
 	case PS3_PARAM_AV_MULTI_OUT_NTSC:
@@ -994,6 +996,12 @@ static int ps3av_probe(struct ps3_system_bus_device *dev)
 		safe_mode = 1;
 #endif /* CONFIG_FB */
 	id = ps3av_auto_videomode(&ps3av->av_hw_conf);
+	if (id < 0) {
+		printk(KERN_ERR "%s: invalid id :%d\n", __func__, id);
+		res = -EINVAL;
+		goto fail;
+	}
+
 	safe_mode = 0;
 
 	mutex_lock(&ps3av->mutex);
@@ -1007,7 +1015,7 @@ static int ps3av_probe(struct ps3_system_bus_device *dev)
 fail:
 	kfree(ps3av);
 	ps3av = NULL;
-	return -ENOMEM;
+	return res;
 }
 
 static int ps3av_remove(struct ps3_system_bus_device *dev)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index bde4b4b0b80f..5c6ef51da274 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -406,6 +406,18 @@ static int cpm_uart_startup(struct uart_port *port)
 
 	pr_debug("CPM uart[%d]:startup\n", port->line);
 
+	/* If the port is not the console, make sure rx is disabled. */
+	if (!(pinfo->flags & FLAG_CONSOLE)) {
+		/* Disable UART rx */
+		if (IS_SMC(pinfo)) {
+			clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN);
+			clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
+		} else {
+			clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR);
+			clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
+		}
+		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+	}
 	/* Install interrupt handler. */
 	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
 	if (retval)
@@ -420,8 +432,6 @@ static int cpm_uart_startup(struct uart_port *port)
 		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
 	}
 
-	if (!(pinfo->flags & FLAG_CONSOLE))
-		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 	return 0;
 }
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0c3a2ab1612c..7f72f8ceaa6f 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -50,8 +50,8 @@
 /* OF Platform device Usage :
  *
  * This driver is only used for PSCs configured in uart mode.  The device
- * tree will have a node for each PSC in uart mode w/ device_type = "serial"
- * and "mpc52xx-psc-uart" in the compatible string
+ * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
+ * list.
  *
  * By default, PSC devices are enumerated in the order they are found.  However
  * a particular PSC number can be forces by adding 'device_no = <port#>'
@@ -522,7 +522,7 @@ mpc52xx_uart_startup(struct uart_port *port)
 
 	/* Request IRQ */
 	ret = request_irq(port->irq, mpc52xx_uart_int,
-		IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+		IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
 		"mpc52xx_psc_uart", port);
 	if (ret)
 		return ret;
@@ -1212,30 +1212,18 @@ mpc52xx_uart_of_resume(struct of_device *op)
 #endif
 
 static void
-mpc52xx_uart_of_assign(struct device_node *np, int idx)
+mpc52xx_uart_of_assign(struct device_node *np)
 {
-	int free_idx = -1;
 	int i;
 
-	/* Find the first free node */
+	/* Find the first free PSC number */
 	for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
 		if (mpc52xx_uart_nodes[i] == NULL) {
-			free_idx = i;
-			break;
+			of_node_get(np);
+			mpc52xx_uart_nodes[i] = np;
+			return;
 		}
 	}
-
-	if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
-		idx = free_idx;
-
-	if (idx < 0)
-		return; /* No free slot; abort */
-
-	of_node_get(np);
-	/* If the slot is already occupied, then swap slots */
-	if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
-		mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
-	mpc52xx_uart_nodes[idx] = np;
 }
 
 static void
@@ -1243,23 +1231,17 @@ mpc52xx_uart_of_enumerate(void)
 {
 	static int enum_done;
 	struct device_node *np;
-	const unsigned int *devno;
 	const struct  of_device_id *match;
 	int i;
 
 	if (enum_done)
 		return;
 
-	for_each_node_by_type(np, "serial") {
+	/* Assign index to each PSC in device tree */
+	for_each_matching_node(np, mpc52xx_uart_of_match) {
 		match = of_match_node(mpc52xx_uart_of_match, np);
-		if (!match)
-			continue;
-
 		psc_ops = match->data;
-
-		/* Is a particular device number requested? */
-		devno = of_get_property(np, "port-number", NULL);
-		mpc52xx_uart_of_assign(np, devno ? *devno : -1);
+		mpc52xx_uart_of_assign(np);
 	}
 
 	enum_done = 1;
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index fe7e5f35e5d0..494d3f756e29 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -354,7 +354,7 @@ static int __init xilinx_spi_of_probe(struct of_device *ofdev,
 	if (xspi->regs == NULL) {
 		rc = -ENOMEM;
 		dev_warn(&ofdev->dev, "ioremap failure\n");
-		goto put_master;
+		goto release_mem;
 	}
 	xspi->irq = r_irq->start;
 
@@ -365,7 +365,7 @@ static int __init xilinx_spi_of_probe(struct of_device *ofdev,
 	prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
 	if (!prop || len < sizeof(*prop)) {
 		dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
-		goto put_master;
+		goto unmap_io;
 	}
 	master->num_chipselect = *prop;
 
@@ -397,6 +397,8 @@ free_irq:
 	free_irq(xspi->irq, xspi);
 unmap_io:
 	iounmap(xspi->regs);
+release_mem:
+	release_mem_region(r_mem->start, resource_size(r_mem));
 put_master:
 	spi_master_put(master);
 	return rc;
@@ -406,6 +408,7 @@ static int __devexit xilinx_spi_remove(struct of_device *ofdev)
 {
 	struct xilinx_spi *xspi;
 	struct spi_master *master;
+	struct resource r_mem;
 
 	master = platform_get_drvdata(ofdev);
 	xspi = spi_master_get_devdata(master);
@@ -413,6 +416,8 @@ static int __devexit xilinx_spi_remove(struct of_device *ofdev)
 	spi_bitbang_stop(&xspi->bitbang);
 	free_irq(xspi->irq, xspi);
 	iounmap(xspi->regs);
+	if (!of_address_to_resource(ofdev->node, 0, &r_mem))
+		release_mem_region(r_mem.start, resource_size(&r_mem));
 	dev_set_drvdata(&ofdev->dev, 0);
 	spi_master_put(xspi->bitbang.master);
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 55f64af072a4..63024145215d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -772,7 +772,7 @@ config TXX9_WDT
 
 config GEF_WDT
 	tristate "GE Fanuc Watchdog Timer"
-	depends on GEF_SBC610
+	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 	---help---
 	  Watchdog timer found in a number of GE Fanuc single board computers.