Merge back cpufreq material for v4.16.

11 files changed, 813 insertions, 84 deletions

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bdce4488ded1..3a88e33b0cfe 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,29 @@
 # ARM CPU Frequency scaling drivers
 #
 
+config ACPI_CPPC_CPUFREQ
+	tristate "CPUFreq driver based on the ACPI CPPC spec"
+	depends on ACPI_PROCESSOR
+	select ACPI_CPPC_LIB
+	help
+	  This adds a CPUFreq driver which uses CPPC methods
+	  as described in the ACPIv5.1 spec. CPPC stands for
+	  Collaborative Processor Performance Controls. It
+	  is based on an abstract continuous scale of CPU
+	  performance values which allows the remote power
+	  processor to flexibly optimize for power and
+	  performance. CPPC relies on power management firmware
+	  support for its operation.
+
+	  If in doubt, say N.
+
+config ARM_ARMADA_37XX_CPUFREQ
+	tristate "Armada 37xx CPUFreq support"
+	depends on ARCH_MVEBU
+	help
+	  This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
+	  The Armada 37xx PMU supports 4 frequency and VDD levels.
+
 # big LITTLE core layer and glue drivers
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
@@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
+config ARM_DT_BL_CPUFREQ
+	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && OF
+	help
+	  This enables probing via DT for Generic CPUfreq driver for ARM
+	  big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_SCPI_CPUFREQ
+	tristate "SCPI based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+	help
+	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
+	  using SCPI protocol for CPU power management.
+
+	  This driver uses SCPI Message Protocol driver to interact with the
+	  firmware providing the CPU DVFS functionality.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+	tristate "Versatile Express SPC based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+	help
+	  This add the CPUfreq driver support for Versatile Express
+	  big.LITTLE platforms using SPC for power management.
+
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
 	depends on ARCH_BRCMSTB || COMPILE_TEST
@@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
 
 	  If in doubt, say N.
 
-config ARM_DT_BL_CPUFREQ
-	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && OF
-	help
-	  This enables probing via DT for Generic CPUfreq driver for ARM
-	  big.LITTLE platform. This gets frequency tables from DT.
-
-config ARM_VEXPRESS_SPC_CPUFREQ
-        tristate "Versatile Express SPC based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
-        help
-          This add the CPUfreq driver support for Versatile Express
-	  big.LITTLE platforms using SPC for power management.
-
 config ARM_EXYNOS5440_CPUFREQ
 	tristate "SAMSUNG EXYNOS5440"
 	depends on SOC_EXYNOS5440
@@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ
 config ARM_SA1110_CPUFREQ
 	bool
 
-config ARM_SCPI_CPUFREQ
-        tristate "SCPI based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
-        help
-	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
-	  using SCPI protocol for CPU power management.
-
-	  This driver uses SCPI Message Protocol driver to interact with the
-	  firmware providing the CPU DVFS functionality.
-
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
@@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ
 	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
 
 	  If in doubt, say N.
-
-config ACPI_CPPC_CPUFREQ
-	tristate "CPUFreq driver based on the ACPI CPPC spec"
-	depends on ACPI_PROCESSOR
-	select ACPI_CPPC_LIB
-	default n
-	help
-	  This adds a CPUFreq driver which uses CPPC methods
-	  as described in the ACPIv5.1 spec. CPPC stands for
-	  Collaborative Processor Performance Controls. It
-	  is based on an abstract continuous scale of CPU
-	  performance values which allows the remote power
-	  processor to flexibly optimize for power and
-	  performance. CPPC relies on power management firmware
-	  support for its operation.
-
-	  If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 812f9e0d01a3..e07715ce8844 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ)	+= armada-37xx-cpufreq.o
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ)		+= cppc_cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
 obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
@@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
 obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
-obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
-obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 
 
 ##################################################################################
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
new file mode 100644
index 000000000000..c6ebc88a7d8d
--- /dev/null
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CPU frequency scaling support for Armada 37xx platform.
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Power management in North Bridge register set */
+#define ARMADA_37XX_NB_L0L1	0x18
+#define ARMADA_37XX_NB_L2L3	0x1C
+#define  ARMADA_37XX_NB_TBG_DIV_OFF	13
+#define  ARMADA_37XX_NB_TBG_DIV_MASK	0x7
+#define  ARMADA_37XX_NB_CLK_SEL_OFF	11
+#define  ARMADA_37XX_NB_CLK_SEL_MASK	0x1
+#define  ARMADA_37XX_NB_CLK_SEL_TBG	0x1
+#define  ARMADA_37XX_NB_TBG_SEL_OFF	9
+#define  ARMADA_37XX_NB_TBG_SEL_MASK	0x3
+#define  ARMADA_37XX_NB_VDD_SEL_OFF	6
+#define  ARMADA_37XX_NB_VDD_SEL_MASK	0x3
+#define  ARMADA_37XX_NB_CONFIG_SHIFT	16
+#define ARMADA_37XX_NB_DYN_MOD	0x24
+#define  ARMADA_37XX_NB_CLK_SEL_EN	BIT(26)
+#define  ARMADA_37XX_NB_TBG_EN		BIT(28)
+#define  ARMADA_37XX_NB_DIV_EN		BIT(29)
+#define  ARMADA_37XX_NB_VDD_EN		BIT(30)
+#define  ARMADA_37XX_NB_DFS_EN		BIT(31)
+#define ARMADA_37XX_NB_CPU_LOAD 0x30
+#define  ARMADA_37XX_NB_CPU_LOAD_MASK	0x3
+#define  ARMADA_37XX_DVFS_LOAD_0	0
+#define  ARMADA_37XX_DVFS_LOAD_1	1
+#define  ARMADA_37XX_DVFS_LOAD_2	2
+#define  ARMADA_37XX_DVFS_LOAD_3	3
+
+/*
+ * On Armada 37xx the Power management manages 4 level of CPU load,
+ * each level can be associated with a CPU clock source, a CPU
+ * divider, a VDD level, etc...
+ */
+#define LOAD_LEVEL_NR	4
+
+struct armada_37xx_dvfs {
+	u32 cpu_freq_max;
+	u8 divider[LOAD_LEVEL_NR];
+};
+
+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
+	{.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+	{.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
+	{.cpu_freq_max = 800*1000*1000,  .divider = {1, 2, 3, 4} },
+	{.cpu_freq_max = 600*1000*1000,  .divider = {2, 4, 5, 6} },
+};
+
+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
+		if (freq == armada_37xx_dvfs[i].cpu_freq_max)
+			return &armada_37xx_dvfs[i];
+	}
+
+	pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
+	return NULL;
+}
+
+/*
+ * Setup the four level managed by the hardware. Once the four level
+ * will be configured then the DVFS will be enabled.
+ */
+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
+						 struct clk *clk, u8 *divider)
+{
+	int load_lvl;
+	struct clk *parent;
+
+	for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
+		unsigned int reg, mask, val, offset = 0;
+
+		if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
+			reg = ARMADA_37XX_NB_L0L1;
+		else
+			reg = ARMADA_37XX_NB_L2L3;
+
+		if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
+		    load_lvl == ARMADA_37XX_DVFS_LOAD_2)
+			offset += ARMADA_37XX_NB_CONFIG_SHIFT;
+
+		/* Set cpu clock source, for all the level we use TBG */
+		val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
+		mask = (ARMADA_37XX_NB_CLK_SEL_MASK
+			<< ARMADA_37XX_NB_CLK_SEL_OFF);
+
+		/*
+		 * Set cpu divider based on the pre-computed array in
+		 * order to have balanced step.
+		 */
+		val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
+		mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
+			<< ARMADA_37XX_NB_TBG_DIV_OFF);
+
+		/* Set VDD divider which is actually the load level. */
+		val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
+		mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
+			<< ARMADA_37XX_NB_VDD_SEL_OFF);
+
+		val <<= offset;
+		mask <<= offset;
+
+		regmap_update_bits(base, reg, mask, val);
+	}
+
+	/*
+	 * Set cpu clock source, for all the level we keep the same
+	 * clock source that the one already configured. For this one
+	 * we need to use the clock framework
+	 */
+	parent = clk_get_parent(clk);
+	clk_set_parent(clk, parent);
+}
+
+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+{
+	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
+		mask = ARMADA_37XX_NB_DFS_EN;
+
+	regmap_update_bits(base, reg, mask, 0);
+}
+
+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
+{
+	unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
+		mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+	/* Start with the highest load (0) */
+	val = ARMADA_37XX_DVFS_LOAD_0;
+	regmap_update_bits(base, reg, mask, val);
+
+	/* Now enable DVFS for the CPUs */
+	reg = ARMADA_37XX_NB_DYN_MOD;
+	mask =	ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
+		ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
+		ARMADA_37XX_NB_DFS_EN;
+
+	regmap_update_bits(base, reg, mask, mask);
+}
+
+static int __init armada37xx_cpufreq_driver_init(void)
+{
+	struct armada_37xx_dvfs *dvfs;
+	struct platform_device *pdev;
+	unsigned int cur_frequency;
+	struct regmap *nb_pm_base;
+	struct device *cpu_dev;
+	int load_lvl, ret;
+	struct clk *clk;
+
+	nb_pm_base =
+		syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
+
+	if (IS_ERR(nb_pm_base))
+		return -ENODEV;
+
+	/* Before doing any configuration on the DVFS first, disable it */
+	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+
+	/*
+	 * On CPU 0 register the operating points supported (which are
+	 * the nominal CPU frequency and full integer divisions of
+	 * it).
+	 */
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		dev_err(cpu_dev, "Cannot get CPU\n");
+		return -ENODEV;
+	}
+
+	clk = clk_get(cpu_dev, 0);
+	if (IS_ERR(clk)) {
+		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+		return PTR_ERR(clk);
+	}
+
+	/* Get nominal (current) CPU frequency */
+	cur_frequency = clk_get_rate(clk);
+	if (!cur_frequency) {
+		dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
+		return -EINVAL;
+	}
+
+	dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
+	if (!dvfs)
+		return -EINVAL;
+
+	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
+
+	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
+	     load_lvl++) {
+		unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+
+		ret = dev_pm_opp_add(cpu_dev, freq, 0);
+		if (ret) {
+			/* clean-up the already added opp before leaving */
+			while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+				freq = cur_frequency / dvfs->divider[load_lvl];
+				dev_pm_opp_remove(cpu_dev, freq);
+			}
+			return ret;
+		}
+	}
+
+	/* Now that everything is setup, enable the DVFS at hardware level */
+	armada37xx_cpufreq_enable_dvfs(nb_pm_base);
+
+	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
+late_initcall(armada37xx_cpufreq_driver_init);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index ecc56e26f8f6..3b585e4bfac5 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = {
 
 	{ .compatible = "marvell,armadaxp", },
 
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt2712", },
+	{ .compatible = "mediatek,mt7622", },
+	{ .compatible = "mediatek,mt7623", },
+	{ .compatible = "mediatek,mt817x", },
+	{ .compatible = "mediatek,mt8173", },
+	{ .compatible = "mediatek,mt8176", },
+
 	{ .compatible = "nvidia,tegra124", },
 
 	{ .compatible = "st,stih407", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 41d148af7748..421f318c0e66 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor)
 /**
  * cpufreq_parse_governor - parse a governor string
  */
-static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
-				struct cpufreq_governor **governor)
+static int cpufreq_parse_governor(char *str_governor,
+				  struct cpufreq_policy *policy)
 {
-	int err = -EINVAL;
-
 	if (cpufreq_driver->setpolicy) {
 		if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
-			*policy = CPUFREQ_POLICY_PERFORMANCE;
-			err = 0;
-		} else if (!strncasecmp(str_governor, "powersave",
-						CPUFREQ_NAME_LEN)) {
-			*policy = CPUFREQ_POLICY_POWERSAVE;
-			err = 0;
+			policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+			return 0;
+		}
+
+		if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+			policy->policy = CPUFREQ_POLICY_POWERSAVE;
+			return 0;
 		}
 	} else {
 		struct cpufreq_governor *t;
@@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 		mutex_lock(&cpufreq_governor_mutex);
 
 		t = find_governor(str_governor);
-
-		if (t == NULL) {
+		if (!t) {
 			int ret;
 
 			mutex_unlock(&cpufreq_governor_mutex);
+
 			ret = request_module("cpufreq_%s", str_governor);
-			mutex_lock(&cpufreq_governor_mutex);
+			if (ret)
+				return -EINVAL;
 
-			if (ret == 0)
-				t = find_governor(str_governor);
-		}
+			mutex_lock(&cpufreq_governor_mutex);
 
-		if (t != NULL) {
-			*governor = t;
-			err = 0;
+			t = find_governor(str_governor);
 		}
+		if (t && !try_module_get(t->owner))
+			t = NULL;
 
 		mutex_unlock(&cpufreq_governor_mutex);
+
+		if (t) {
+			policy->governor = t;
+			return 0;
+		}
 	}
-	return err;
+
+	return -EINVAL;
 }
 
 /**
@@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 	if (ret != 1)
 		return -EINVAL;
 
-	if (cpufreq_parse_governor(str_governor, &new_policy.policy,
-						&new_policy.governor))
+	if (cpufreq_parse_governor(str_governor, &new_policy))
 		return -EINVAL;
 
 	ret = cpufreq_set_policy(policy, &new_policy);
+
+	if (new_policy.governor)
+		module_put(new_policy.governor->owner);
+
 	return ret ? ret : count;
 }
 
@@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
 		if (policy->last_policy)
 			new_policy.policy = policy->last_policy;
 		else
-			cpufreq_parse_governor(gov->name, &new_policy.policy,
-					       NULL);
+			cpufreq_parse_governor(gov->name, &new_policy);
 	}
 	/* set default policy */
 	return cpufreq_set_policy(policy, &new_policy);
@@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 	mutex_lock(&cpufreq_governor_mutex);
 	list_del(&governor->governor_list);
 	mutex_unlock(&cpufreq_governor_mutex);
-	return;
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
 
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index c46a12df40dd..5faa37c5b091 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
 	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
 		longhaul_setup_voltagescaling();
 
-	policy->cpuinfo.transition_latency = 200000;	/* nsec */
+	policy->transition_delay_us = 200000;	/* usec */
 
 	return cpufreq_table_validate_and_show(policy, longhaul_table);
 }
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index e0d5090b303d..b783919f063d 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufreq_platdrv = {
 /* List of machines supported by this driver */
 static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt2712", },
 	{ .compatible = "mediatek,mt7622", },
 	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },
diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c
index ed915ee85dd9..31513bd42705 100644
--- a/drivers/cpufreq/mvebu-cpufreq.c
+++ b/drivers/cpufreq/mvebu-cpufreq.c
@@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 			return PTR_ERR(clk);
 		}
 
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
 		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
 		if (ret) {
 			clk_put(clk);
@@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
 		if (ret) {
 			clk_put(clk);
-			return ret;
+			dev_err(cpu_dev, "Failed to register OPPs\n");
+			goto opp_register_failed;
 		}
 
 		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
@@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 		if (ret)
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
+		clk_put(clk);
 	}
 
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 	return 0;
+
+opp_register_failed:
+	/* As registering has failed remove all the opp for all cpus */
+	dev_pm_opp_cpumask_remove_table(cpu_possible_mask);
+
+	return ret;
 }
 device_initcall(armada_xp_pmsu_cpufreq_init);
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 923317f03b4b..a099b7bf74cd 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -17,6 +17,7 @@
 #include <linux/cpu.h>
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data {
 	unsigned long efuse_mask;
 	unsigned long efuse_shift;
 	unsigned long rev_offset;
+	bool multi_regulator;
 };
 
 struct ti_cpufreq_data {
@@ -57,6 +59,7 @@ struct ti_cpufreq_data {
 	struct device_node *opp_node;
 	struct regmap *syscon;
 	const struct ti_cpufreq_soc_data *soc_data;
+	struct opp_table *opp_table;
 };
 
 static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
@@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = {
 	.efuse_offset = 0x07fc,
 	.efuse_mask = 0x1fff,
 	.rev_offset = 0x600,
+	.multi_regulator = false,
 };
 
 static struct ti_cpufreq_soc_data am4x_soc_data = {
@@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = {
 	.efuse_offset = 0x0610,
 	.efuse_mask = 0x3f,
 	.rev_offset = 0x600,
+	.multi_regulator = false,
 };
 
 static struct ti_cpufreq_soc_data dra7_soc_data = {
@@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = {
 	.efuse_mask = 0xf80000,
 	.efuse_shift = 19,
 	.rev_offset = 0x204,
+	.multi_regulator = true,
 };
 
 /**
@@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
 	{},
 };
 
-static int ti_cpufreq_init(void)
+static int ti_cpufreq_probe(struct platform_device *pdev)
 {
 	u32 version[VERSION_COUNT];
 	struct device_node *np;
 	const struct of_device_id *match;
+	struct opp_table *ti_opp_table;
 	struct ti_cpufreq_data *opp_data;
+	const char * const reg_names[] = {"vdd", "vbb"};
 	int ret;
 
 	np = of_find_node_by_path("/");
@@ -247,16 +255,29 @@ static int ti_cpufreq_init(void)
 	if (ret)
 		goto fail_put_node;
 
-	ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
-							  version, VERSION_COUNT));
-	if (ret) {
+	ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
+						   version, VERSION_COUNT);
+	if (IS_ERR(ti_opp_table)) {
 		dev_err(opp_data->cpu_dev,
 			"Failed to set supported hardware\n");
+		ret = PTR_ERR(ti_opp_table);
 		goto fail_put_node;
 	}
 
-	of_node_put(opp_data->opp_node);
+	opp_data->opp_table = ti_opp_table;
+
+	if (opp_data->soc_data->multi_regulator) {
+		ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
+							 reg_names,
+							 ARRAY_SIZE(reg_names));
+		if (IS_ERR(ti_opp_table)) {
+			dev_pm_opp_put_supported_hw(opp_data->opp_table);
+			ret =  PTR_ERR(ti_opp_table);
+			goto fail_put_node;
+		}
+	}
 
+	of_node_put(opp_data->opp_node);
 register_cpufreq_dt:
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 
@@ -269,4 +290,22 @@ free_opp_data:
 
 	return ret;
 }
-device_initcall(ti_cpufreq_init);
+
+static int ti_cpufreq_init(void)
+{
+	platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ti_cpufreq_init);
+
+static struct platform_driver ti_cpufreq_driver = {
+	.probe = ti_cpufreq_probe,
+	.driver = {
+		.name = "ti-cpufreq",
+	},
+};
+module_platform_driver(ti_cpufreq_driver);
+
+MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/opp/Makefile b/drivers/opp/Makefile
index e70ceb406fe9..6ce6aefacc81 100644
--- a/drivers/opp/Makefile
+++ b/drivers/opp/Makefile
@@ -2,3 +2,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
 obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
+obj-$(CONFIG_ARM_TI_CPUFREQ)	+= ti-opp-supply.o
diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c
new file mode 100644
index 000000000000..44dae3e51aac
--- /dev/null
+++ b/drivers/opp/ti-opp-supply.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon <nm@ti.com>
+ *	Dave Gerlach <d-gerlach@ti.com>
+ *
+ * TI OPP supply driver that provides override into the regulator control
+ * for generic opp core to handle devices with ABB regulator and/or
+ * SmartReflex Class0.
+ */
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/**
+ * struct ti_opp_supply_optimum_voltage_table - optimized voltage table
+ * @reference_uv:	reference voltage (usually Nominal voltage)
+ * @optimized_uv:	Optimized voltage from efuse
+ */
+struct ti_opp_supply_optimum_voltage_table {
+	unsigned int reference_uv;
+	unsigned int optimized_uv;
+};
+
+/**
+ * struct ti_opp_supply_data - OMAP specific opp supply data
+ * @vdd_table:	Optimized voltage mapping table
+ * @num_vdd_table: number of entries in vdd_table
+ * @vdd_absolute_max_voltage_uv: absolute maximum voltage in UV for the supply
+ */
+struct ti_opp_supply_data {
+	struct ti_opp_supply_optimum_voltage_table *vdd_table;
+	u32 num_vdd_table;
+	u32 vdd_absolute_max_voltage_uv;
+};
+
+static struct ti_opp_supply_data opp_data;
+
+/**
+ * struct ti_opp_supply_of_data - device tree match data
+ * @flags:	specific type of opp supply
+ * @efuse_voltage_mask: mask required for efuse register representing voltage
+ * @efuse_voltage_uv: Are the efuse entries in micro-volts? if not, assume
+ *		milli-volts.
+ */
+struct ti_opp_supply_of_data {
+#define OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE	BIT(1)
+#define OPPDM_HAS_NO_ABB			BIT(2)
+	const u8 flags;
+	const u32 efuse_voltage_mask;
+	const bool efuse_voltage_uv;
+};
+
+/**
+ * _store_optimized_voltages() - store optimized voltages
+ * @dev:	ti opp supply device for which we need to store info
+ * @data:	data specific to the device
+ *
+ * Picks up efuse based optimized voltages for VDD unique per device and
+ * stores it in internal data structure for use during transition requests.
+ *
+ * Return: If successful, 0, else appropriate error value.
+ */
+static int _store_optimized_voltages(struct device *dev,
+				     struct ti_opp_supply_data *data)
+{
+	void __iomem *base;
+	struct property *prop;
+	struct resource *res;
+	const __be32 *val;
+	int proplen, i;
+	int ret = 0;
+	struct ti_opp_supply_optimum_voltage_table *table;
+	const struct ti_opp_supply_of_data *of_data = dev_get_drvdata(dev);
+
+	/* pick up Efuse based voltages */
+	res = platform_get_resource(to_platform_device(dev), IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Unable to get IO resource\n");
+		ret = -ENODEV;
+		goto out_map;
+	}
+
+	base = ioremap_nocache(res->start, resource_size(res));
+	if (!base) {
+		dev_err(dev, "Unable to map Efuse registers\n");
+		ret = -ENOMEM;
+		goto out_map;
+	}
+
+	/* Fetch efuse-settings. */
+	prop = of_find_property(dev->of_node, "ti,efuse-settings", NULL);
+	if (!prop) {
+		dev_err(dev, "No 'ti,efuse-settings' property found\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	proplen = prop->length / sizeof(int);
+	data->num_vdd_table = proplen / 2;
+	/* Verify for corrupted OPP entries in dt */
+	if (data->num_vdd_table * 2 * sizeof(int) != prop->length) {
+		dev_err(dev, "Invalid 'ti,efuse-settings'\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "ti,absolute-max-voltage-uv",
+				   &data->vdd_absolute_max_voltage_uv);
+	if (ret) {
+		dev_err(dev, "ti,absolute-max-voltage-uv is missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	table = kzalloc(sizeof(*data->vdd_table) *
+				  data->num_vdd_table, GFP_KERNEL);
+	if (!table) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	data->vdd_table = table;
+
+	val = prop->value;
+	for (i = 0; i < data->num_vdd_table; i++, table++) {
+		u32 efuse_offset;
+		u32 tmp;
+
+		table->reference_uv = be32_to_cpup(val++);
+		efuse_offset = be32_to_cpup(val++);
+
+		tmp = readl(base + efuse_offset);
+		tmp &= of_data->efuse_voltage_mask;
+		tmp >>= __ffs(of_data->efuse_voltage_mask);
+
+		table->optimized_uv = of_data->efuse_voltage_uv ? tmp :
+					tmp * 1000;
+
+		dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d vset=%d\n",
+			i, efuse_offset, table->reference_uv,
+			table->optimized_uv);
+
+		/*
+		 * Some older samples might not have optimized efuse
+		 * Use reference voltage for those - just add debug message
+		 * for them.
+		 */
+		if (!table->optimized_uv) {
+			dev_dbg(dev, "[%d] efuse=0x%08x volt_table=%d:vset0\n",
+				i, efuse_offset, table->reference_uv);
+			table->optimized_uv = table->reference_uv;
+		}
+	}
+out:
+	iounmap(base);
+out_map:
+	return ret;
+}
+
+/**
+ * _free_optimized_voltages() - free resources for optvoltages
+ * @dev:	device for which we need to free info
+ * @data:	data specific to the device
+ */
+static void _free_optimized_voltages(struct device *dev,
+				     struct ti_opp_supply_data *data)
+{
+	kfree(data->vdd_table);
+	data->vdd_table = NULL;
+	data->num_vdd_table = 0;
+}
+
+/**
+ * _get_optimal_vdd_voltage() - Finds optimal voltage for the supply
+ * @dev:	device for which we need to find info
+ * @data:	data specific to the device
+ * @reference_uv:	reference voltage (OPP voltage) for which we need value
+ *
+ * Return: if a match is found, return optimized voltage, else return
+ * reference_uv, also return reference_uv if no optimization is needed.
+ */
+static int _get_optimal_vdd_voltage(struct device *dev,
+				    struct ti_opp_supply_data *data,
+				    int reference_uv)
+{
+	int i;
+	struct ti_opp_supply_optimum_voltage_table *table;
+
+	if (!data->num_vdd_table)
+		return reference_uv;
+
+	table = data->vdd_table;
+	if (!table)
+		return -EINVAL;
+
+	/* Find a exact match - this list is usually very small */
+	for (i = 0; i < data->num_vdd_table; i++, table++)
+		if (table->reference_uv == reference_uv)
+			return table->optimized_uv;
+
+	/* IF things are screwed up, we'd make a mess on console.. ratelimit */
+	dev_err_ratelimited(dev, "%s: Failed optimized voltage match for %d\n",
+			    __func__, reference_uv);
+	return reference_uv;
+}
+
+static int _opp_set_voltage(struct device *dev,
+			    struct dev_pm_opp_supply *supply,
+			    int new_target_uv, struct regulator *reg,
+			    char *reg_name)
+{
+	int ret;
+	unsigned long vdd_uv, uv_max;
+
+	if (new_target_uv)
+		vdd_uv = new_target_uv;
+	else
+		vdd_uv = supply->u_volt;
+
+	/*
+	 * If we do have an absolute max voltage specified, then we should
+	 * use that voltage instead to allow for cases where the voltage rails
+	 * are ganged (example if we set the max for an opp as 1.12v, and
+	 * the absolute max is 1.5v, for another rail to get 1.25v, it cannot
+	 * be achieved if the regulator is constrainted to max of 1.12v, even
+	 * if it can function at 1.25v
+	 */
+	if (opp_data.vdd_absolute_max_voltage_uv)
+		uv_max = opp_data.vdd_absolute_max_voltage_uv;
+	else
+		uv_max = supply->u_volt_max;
+
+	if (vdd_uv > uv_max ||
+	    vdd_uv < supply->u_volt_min ||
+	    supply->u_volt_min > uv_max) {
+		dev_warn(dev,
+			 "Invalid range voltages [Min:%lu target:%lu Max:%lu]\n",
+			 supply->u_volt_min, vdd_uv, uv_max);
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "%s scaling to %luuV[min %luuV max %luuV]\n", reg_name,
+		vdd_uv, supply->u_volt_min,
+		uv_max);
+
+	ret = regulator_set_voltage_triplet(reg,
+					    supply->u_volt_min,
+					    vdd_uv,
+					    uv_max);
+	if (ret) {
+		dev_err(dev, "%s failed for %luuV[min %luuV max %luuV]\n",
+			reg_name, vdd_uv, supply->u_volt_min,
+			uv_max);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_opp_supply_set_opp() - do the opp supply transition
+ * @data:	information on regulators and new and old opps provided by
+ *		opp core to use in transition
+ *
+ * Return: If successful, 0, else appropriate error value.
+ */
+int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data)
+{
+	struct dev_pm_opp_supply *old_supply_vdd = &data->old_opp.supplies[0];
+	struct dev_pm_opp_supply *old_supply_vbb = &data->old_opp.supplies[1];
+	struct dev_pm_opp_supply *new_supply_vdd = &data->new_opp.supplies[0];
+	struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1];
+	struct device *dev = data->dev;
+	unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
+	struct clk *clk = data->clk;
+	struct regulator *vdd_reg = data->regulators[0];
+	struct regulator *vbb_reg = data->regulators[1];
+	int vdd_uv;
+	int ret;
+
+	vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data,
+					  new_supply_vbb->u_volt);
+
+	/* Scaling up? Scale voltage before frequency */
+	if (freq > old_freq) {
+		ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
+				       "vdd");
+		if (ret)
+			goto restore_voltage;
+
+		ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
+		if (ret)
+			goto restore_voltage;
+	}
+
+	/* Change frequency */
+	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
+		__func__, old_freq, freq);
+
+	ret = clk_set_rate(clk, freq);
+	if (ret) {
+		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+			ret);
+		goto restore_voltage;
+	}
+
+	/* Scaling down? Scale voltage after frequency */
+	if (freq < old_freq) {
+		ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
+		if (ret)
+			goto restore_freq;
+
+		ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
+				       "vdd");
+		if (ret)
+			goto restore_freq;
+	}
+
+	return 0;
+
+restore_freq:
+	ret = clk_set_rate(clk, old_freq);
+	if (ret)
+		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
+			__func__, old_freq);
+restore_voltage:
+	/* This shouldn't harm even if the voltages weren't updated earlier */
+	if (old_supply_vdd->u_volt) {
+		ret = _opp_set_voltage(dev, old_supply_vbb, 0, vbb_reg, "vbb");
+		if (ret)
+			return ret;
+
+		ret = _opp_set_voltage(dev, old_supply_vdd, 0, vdd_reg,
+				       "vdd");
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static const struct ti_opp_supply_of_data omap_generic_of_data = {
+};
+
+static const struct ti_opp_supply_of_data omap_omap5_of_data = {
+	.flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE,
+	.efuse_voltage_mask = 0xFFF,
+	.efuse_voltage_uv = false,
+};
+
+static const struct ti_opp_supply_of_data omap_omap5core_of_data = {
+	.flags = OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE | OPPDM_HAS_NO_ABB,
+	.efuse_voltage_mask = 0xFFF,
+	.efuse_voltage_uv = false,
+};
+
+static const struct of_device_id ti_opp_supply_of_match[] = {
+	{.compatible = "ti,omap-opp-supply", .data = &omap_generic_of_data},
+	{.compatible = "ti,omap5-opp-supply", .data = &omap_omap5_of_data},
+	{.compatible = "ti,omap5-core-opp-supply",
+	 .data = &omap_omap5core_of_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ti_opp_supply_of_match);
+
+static int ti_opp_supply_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *cpu_dev = get_cpu_device(0);
+	const struct of_device_id *match;
+	const struct ti_opp_supply_of_data *of_data;
+	int ret = 0;
+
+	match = of_match_device(ti_opp_supply_of_match, dev);
+	if (!match) {
+		/* We do not expect this to happen */
+		dev_err(dev, "%s: Unable to match device\n", __func__);
+		return -ENODEV;
+	}
+	if (!match->data) {
+		/* Again, unlikely.. but mistakes do happen */
+		dev_err(dev, "%s: Bad data in match\n", __func__);
+		return -EINVAL;
+	}
+	of_data = match->data;
+
+	dev_set_drvdata(dev, (void *)of_data);
+
+	/* If we need optimized voltage */
+	if (of_data->flags & OPPDM_EFUSE_CLASS0_OPTIMIZED_VOLTAGE) {
+		ret = _store_optimized_voltages(dev, &opp_data);
+		if (ret)
+			return ret;
+	}
+
+	ret = PTR_ERR_OR_ZERO(dev_pm_opp_register_set_opp_helper(cpu_dev,
+								 ti_opp_supply_set_opp));
+	if (ret)
+		_free_optimized_voltages(dev, &opp_data);
+
+	return ret;
+}
+
+static struct platform_driver ti_opp_supply_driver = {
+	.probe = ti_opp_supply_probe,
+	.driver = {
+		   .name = "ti_opp_supply",
+		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(ti_opp_supply_of_match),
+		   },
+};
+module_platform_driver(ti_opp_supply_driver);
+
+MODULE_DESCRIPTION("Texas Instruments OMAP OPP Supply driver");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_LICENSE("GPL v2");