diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-17 01:11:04 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-17 01:11:04 +0300 |
commit | e6bee325e49f17c65c1fd66e9e8b348c85788341 (patch) | |
tree | bcc9e5d8e82efa9009edd481a837cc3626360091 /drivers | |
parent | a5e6b135bdff649e4330f98e2e80dbb1984f7e77 (diff) | |
parent | 6ae705b23be8da52d3163be9d81e9b767876aaf9 (diff) | |
download | linux-e6bee325e49f17c65c1fd66e9e8b348c85788341.tar.xz |
Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
pch_uart: reference clock on CM-iTC
pch_phub: add new device ML7213
n_gsm: fix UIH control byte : P bit should be 0
n_gsm: add a documentation
serial: msm_serial_hs: Add MSM high speed UART driver
tty_audit: fix tty_audit_add_data live lock on audit disabled
tty: move cd1865.h to drivers/staging/tty/
Staging: tty: fix build with epca.c driver
pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
Staging: generic_serial: fix double locking bug
nozomi: don't use flush_scheduled_work()
tty/serial: Relax the device_type restriction from of_serial
MAINTAINERS: Update HVC file patterns
tty: phase out of ioctl file pointer for tty3270 as well
tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
pch_uart: Fix DMA channel miss-setting issue.
pch_uart: fix exclusive access issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix uart clock setting issue
pch_uart : Use dev_xxx not pr_xxx
...
Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/bluetooth/hci_ath.c | 26 | ||||
-rw-r--r-- | drivers/char/Kconfig | 540 | ||||
-rw-r--r-- | drivers/char/Makefile | 24 | ||||
-rw-r--r-- | drivers/char/pcmcia/Makefile | 2 | ||||
-rw-r--r-- | drivers/char/pcmcia/synclink_cs.c | 13 | ||||
-rw-r--r-- | drivers/char/ttyprintk.c | 2 | ||||
-rw-r--r-- | drivers/isdn/capi/capi.c | 10 | ||||
-rw-r--r-- | drivers/isdn/gigaset/interface.c | 12 | ||||
-rw-r--r-- | drivers/isdn/gigaset/ser-gigaset.c | 2 | ||||
-rw-r--r-- | drivers/isdn/i4l/isdn_tty.c | 7 | ||||
-rw-r--r-- | drivers/misc/pch_phub.c | 20 | ||||
-rw-r--r-- | drivers/mmc/card/sdio_uart.c | 4 | ||||
-rw-r--r-- | drivers/net/irda/irtty-sir.c | 2 | ||||
-rw-r--r-- | drivers/net/usb/hso.c | 10 | ||||
-rw-r--r-- | drivers/net/wan/pc300_tty.c | 9 | ||||
-rw-r--r-- | drivers/s390/char/keyboard.c | 4 | ||||
-rw-r--r-- | drivers/s390/char/keyboard.h | 2 | ||||
-rw-r--r-- | drivers/s390/char/tty3270.c | 14 | ||||
-rw-r--r-- | drivers/staging/Kconfig | 4 | ||||
-rw-r--r-- | drivers/staging/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/generic_serial/Kconfig | 45 | ||||
-rw-r--r-- | drivers/staging/generic_serial/Makefile | 6 | ||||
-rw-r--r-- | drivers/staging/generic_serial/TODO | 6 | ||||
-rw-r--r-- | drivers/staging/generic_serial/generic_serial.c (renamed from drivers/char/generic_serial.c) | 4 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/Makefile (renamed from drivers/char/rio/Makefile) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/board.h (renamed from drivers/char/rio/board.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/cirrus.h (renamed from drivers/char/rio/cirrus.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/cmdblk.h (renamed from drivers/char/rio/cmdblk.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/cmdpkt.h (renamed from drivers/char/rio/cmdpkt.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/daemon.h (renamed from drivers/char/rio/daemon.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/errors.h (renamed from drivers/char/rio/errors.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/func.h (renamed from drivers/char/rio/func.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/host.h (renamed from drivers/char/rio/host.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/link.h (renamed from drivers/char/rio/link.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/linux_compat.h (renamed from drivers/char/rio/linux_compat.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/map.h (renamed from drivers/char/rio/map.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/param.h (renamed from drivers/char/rio/param.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/parmmap.h (renamed from drivers/char/rio/parmmap.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/pci.h (renamed from drivers/char/rio/pci.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/phb.h (renamed from drivers/char/rio/phb.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/pkt.h (renamed from drivers/char/rio/pkt.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/port.h (renamed from drivers/char/rio/port.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/protsts.h (renamed from drivers/char/rio/protsts.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rio.h (renamed from drivers/char/rio/rio.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rio_linux.c (renamed from drivers/char/rio/rio_linux.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rio_linux.h (renamed from drivers/char/rio/rio_linux.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioboard.h (renamed from drivers/char/rio/rioboard.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioboot.c (renamed from drivers/char/rio/rioboot.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riocmd.c (renamed from drivers/char/rio/riocmd.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioctrl.c (renamed from drivers/char/rio/rioctrl.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riodrvr.h (renamed from drivers/char/rio/riodrvr.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioinfo.h (renamed from drivers/char/rio/rioinfo.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioinit.c (renamed from drivers/char/rio/rioinit.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riointr.c (renamed from drivers/char/rio/riointr.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioioctl.h (renamed from drivers/char/rio/rioioctl.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioparam.c (renamed from drivers/char/rio/rioparam.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rioroute.c (renamed from drivers/char/rio/rioroute.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riospace.h (renamed from drivers/char/rio/riospace.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riotable.c (renamed from drivers/char/rio/riotable.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/riotty.c (renamed from drivers/char/rio/riotty.c) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/route.h (renamed from drivers/char/rio/route.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/rup.h (renamed from drivers/char/rio/rup.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/rio/unixrup.h (renamed from drivers/char/rio/unixrup.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/ser_a2232.c (renamed from drivers/char/ser_a2232.c) | 6 | ||||
-rw-r--r-- | drivers/staging/generic_serial/ser_a2232.h (renamed from drivers/char/ser_a2232.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/ser_a2232fw.ax (renamed from drivers/char/ser_a2232fw.ax) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/ser_a2232fw.h (renamed from drivers/char/ser_a2232fw.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/sx.c (renamed from drivers/char/sx.c) | 8 | ||||
-rw-r--r-- | drivers/staging/generic_serial/sx.h (renamed from drivers/char/sx.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/sxboards.h (renamed from drivers/char/sxboards.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/sxwindow.h (renamed from drivers/char/sxwindow.h) | 0 | ||||
-rw-r--r-- | drivers/staging/generic_serial/vme_scc.c (renamed from drivers/char/vme_scc.c) | 4 | ||||
-rw-r--r-- | drivers/staging/quatech_usb2/quatech_usb2.c | 6 | ||||
-rw-r--r-- | drivers/staging/serqt_usb2/serqt_usb2.c | 13 | ||||
-rw-r--r-- | drivers/staging/tty/Kconfig | 87 | ||||
-rw-r--r-- | drivers/staging/tty/Makefile | 7 | ||||
-rw-r--r-- | drivers/staging/tty/TODO | 6 | ||||
-rw-r--r-- | drivers/staging/tty/cd1865.h (renamed from drivers/char/cd1865.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/digi1.h (renamed from drivers/char/digi1.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/digiFep1.h (renamed from drivers/char/digiFep1.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/digiPCI.h (renamed from drivers/char/digiPCI.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/epca.c (renamed from drivers/char/epca.c) | 16 | ||||
-rw-r--r-- | drivers/staging/tty/epca.h (renamed from drivers/char/epca.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/epcaconfig.h (renamed from drivers/char/epcaconfig.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/Makefile (renamed from drivers/char/ip2/Makefile) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2cmd.c (renamed from drivers/char/ip2/i2cmd.c) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2cmd.h (renamed from drivers/char/ip2/i2cmd.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2ellis.c (renamed from drivers/char/ip2/i2ellis.c) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2ellis.h (renamed from drivers/char/ip2/i2ellis.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2hw.h (renamed from drivers/char/ip2/i2hw.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2lib.c (renamed from drivers/char/ip2/i2lib.c) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2lib.h (renamed from drivers/char/ip2/i2lib.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/i2pack.h (renamed from drivers/char/ip2/i2pack.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/ip2.h (renamed from drivers/char/ip2/ip2.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/ip2ioctl.h (renamed from drivers/char/ip2/ip2ioctl.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/ip2main.c (renamed from drivers/char/ip2/ip2main.c) | 12 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/ip2trace.h (renamed from drivers/char/ip2/ip2trace.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/ip2/ip2types.h (renamed from drivers/char/ip2/ip2types.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/istallion.c (renamed from drivers/char/istallion.c) | 8 | ||||
-rw-r--r-- | drivers/staging/tty/riscom8.c (renamed from drivers/char/riscom8.c) | 8 | ||||
-rw-r--r-- | drivers/staging/tty/riscom8.h (renamed from drivers/char/riscom8.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/riscom8_reg.h (renamed from drivers/char/riscom8_reg.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/serial167.c (renamed from drivers/char/serial167.c) | 7 | ||||
-rw-r--r-- | drivers/staging/tty/specialix.c (renamed from drivers/char/specialix.c) | 6 | ||||
-rw-r--r-- | drivers/staging/tty/specialix_io8.h (renamed from drivers/char/specialix_io8.h) | 0 | ||||
-rw-r--r-- | drivers/staging/tty/stallion.c (renamed from drivers/char/stallion.c) | 9 | ||||
-rw-r--r-- | drivers/tty/Kconfig | 321 | ||||
-rw-r--r-- | drivers/tty/Makefile | 15 | ||||
-rw-r--r-- | drivers/tty/amiserial.c (renamed from drivers/char/amiserial.c) | 8 | ||||
-rw-r--r-- | drivers/tty/bfin_jtag_comm.c (renamed from drivers/char/bfin_jtag_comm.c) | 0 | ||||
-rw-r--r-- | drivers/tty/cyclades.c (renamed from drivers/char/cyclades.c) | 6 | ||||
-rw-r--r-- | drivers/tty/hvc/Kconfig | 105 | ||||
-rw-r--r-- | drivers/tty/hvc/Makefile | 1 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_bfin_jtag.c | 105 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_dcc.c | 43 | ||||
-rw-r--r-- | drivers/tty/hvc/hvsi.c | 6 | ||||
-rw-r--r-- | drivers/tty/ipwireless/Makefile (renamed from drivers/char/pcmcia/ipwireless/Makefile) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/hardware.c (renamed from drivers/char/pcmcia/ipwireless/hardware.c) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/hardware.h (renamed from drivers/char/pcmcia/ipwireless/hardware.h) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/main.c (renamed from drivers/char/pcmcia/ipwireless/main.c) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/main.h (renamed from drivers/char/pcmcia/ipwireless/main.h) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/network.c (renamed from drivers/char/pcmcia/ipwireless/network.c) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/network.h (renamed from drivers/char/pcmcia/ipwireless/network.h) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/setup_protocol.h (renamed from drivers/char/pcmcia/ipwireless/setup_protocol.h) | 0 | ||||
-rw-r--r-- | drivers/tty/ipwireless/tty.c (renamed from drivers/char/pcmcia/ipwireless/tty.c) | 8 | ||||
-rw-r--r-- | drivers/tty/ipwireless/tty.h (renamed from drivers/char/pcmcia/ipwireless/tty.h) | 0 | ||||
-rw-r--r-- | drivers/tty/isicom.c (renamed from drivers/char/isicom.c) | 8 | ||||
-rw-r--r-- | drivers/tty/moxa.c (renamed from drivers/char/moxa.c) | 10 | ||||
-rw-r--r-- | drivers/tty/moxa.h (renamed from drivers/char/moxa.h) | 0 | ||||
-rw-r--r-- | drivers/tty/mxser.c (renamed from drivers/char/mxser.c) | 6 | ||||
-rw-r--r-- | drivers/tty/mxser.h (renamed from drivers/char/mxser.h) | 0 | ||||
-rw-r--r-- | drivers/tty/n_gsm.c | 9 | ||||
-rw-r--r-- | drivers/tty/nozomi.c (renamed from drivers/char/nozomi.c) | 10 | ||||
-rw-r--r-- | drivers/tty/pty.c | 4 | ||||
-rw-r--r-- | drivers/tty/rocket.c (renamed from drivers/char/rocket.c) | 8 | ||||
-rw-r--r-- | drivers/tty/rocket.h (renamed from drivers/char/rocket.h) | 0 | ||||
-rw-r--r-- | drivers/tty/rocket_int.h (renamed from drivers/char/rocket_int.h) | 0 | ||||
-rw-r--r-- | drivers/tty/serial/68328serial.c | 25 | ||||
-rw-r--r-- | drivers/tty/serial/68328serial.h | 1 | ||||
-rw-r--r-- | drivers/tty/serial/68360serial.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/8250.c | 33 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 31 | ||||
-rw-r--r-- | drivers/tty/serial/Makefile | 2 | ||||
-rw-r--r-- | drivers/tty/serial/altera_jtaguart.c | 85 | ||||
-rw-r--r-- | drivers/tty/serial/altera_uart.c | 22 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 16 | ||||
-rw-r--r-- | drivers/tty/serial/bfin_sport_uart.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/crisv10.c | 7 | ||||
-rw-r--r-- | drivers/tty/serial/ifx6x60.c | 68 | ||||
-rw-r--r-- | drivers/tty/serial/ifx6x60.h | 6 | ||||
-rw-r--r-- | drivers/tty/serial/mfd.c | 73 | ||||
-rw-r--r-- | drivers/tty/serial/mrst_max3110.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/msm_serial_hs.c | 1880 | ||||
-rw-r--r-- | drivers/tty/serial/msm_smd_tty.c | 236 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 18 | ||||
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 329 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 22 | ||||
-rw-r--r-- | drivers/tty/synclink.c (renamed from drivers/char/synclink.c) | 13 | ||||
-rw-r--r-- | drivers/tty/synclink_gt.c (renamed from drivers/char/synclink_gt.c) | 19 | ||||
-rw-r--r-- | drivers/tty/synclinkmp.c (renamed from drivers/char/synclinkmp.c) | 17 | ||||
-rw-r--r-- | drivers/tty/tty_audit.c | 4 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 22 | ||||
-rw-r--r-- | drivers/tty/tty_ioctl.c | 14 | ||||
-rw-r--r-- | drivers/tty/tty_ldisc.c | 17 | ||||
-rw-r--r-- | drivers/tty/vt/keyboard.c | 5 | ||||
-rw-r--r-- | drivers/tty/vt/vc_screen.c | 110 | ||||
-rw-r--r-- | drivers/tty/vt/vt.c | 27 | ||||
-rw-r--r-- | drivers/tty/vt/vt_ioctl.c | 12 | ||||
-rw-r--r-- | drivers/usb/class/cdc-acm.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/ark3116.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/belkin_sa.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/ch341.c | 7 | ||||
-rw-r--r-- | drivers/usb/serial/cp210x.c | 19 | ||||
-rw-r--r-- | drivers/usb/serial/cypress_m8.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/digi_acceleport.c | 14 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/io_edgeport.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/io_ti.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/iuu_phoenix.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/keyspan.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/keyspan.h | 5 | ||||
-rw-r--r-- | drivers/usb/serial/keyspan_pda.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/kobil_sct.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/mct_u232.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/mos7720.c | 8 | ||||
-rw-r--r-- | drivers/usb/serial/mos7840.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/opticon.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/oti6858.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/pl2303.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/sierra.c | 4 | ||||
-rw-r--r-- | drivers/usb/serial/spcp8x5.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/ssu100.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/ti_usb_3410_5052.c | 14 | ||||
-rw-r--r-- | drivers/usb/serial/usb-serial.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/usb-wwan.h | 6 | ||||
-rw-r--r-- | drivers/usb/serial/usb_wwan.c | 6 | ||||
-rw-r--r-- | drivers/usb/serial/whiteheat.c | 12 |
199 files changed, 3726 insertions, 1304 deletions
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 6a160c17ea94..bd34406faaae 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -51,32 +51,32 @@ struct ath_struct { static int ath_wakeup_ar3k(struct tty_struct *tty) { - struct termios settings; - int status = tty->driver->ops->tiocmget(tty, NULL); + struct ktermios ktermios; + int status = tty->driver->ops->tiocmget(tty); if (status & TIOCM_CTS) return status; /* Disable Automatic RTSCTS */ - n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); - settings.c_cflag &= ~CRTSCTS; - n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + memcpy(&ktermios, tty->termios, sizeof(ktermios)); + ktermios.c_cflag &= ~CRTSCTS; + tty_set_termios(tty, &ktermios); /* Clear RTS first */ - status = tty->driver->ops->tiocmget(tty, NULL); - tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS); + status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS); mdelay(20); /* Set RTS, wake up board */ - status = tty->driver->ops->tiocmget(tty, NULL); - tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00); + status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00); mdelay(20); - status = tty->driver->ops->tiocmget(tty, NULL); + status = tty->driver->ops->tiocmget(tty); - n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); - settings.c_cflag |= CRTSCTS; - n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + /* Disable Automatic RTSCTS */ + ktermios.c_cflag |= CRTSCTS; + status = tty_set_termios(tty, &ktermios); return status; } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index b7980a83ce2d..04f8b2d083c6 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -4,89 +4,7 @@ menu "Character devices" -config VT - bool "Virtual terminal" if EXPERT - depends on !S390 - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-<function key>. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config CONSOLE_TRANSLATIONS - depends on VT - default y - bool "Enable character translations in console" if EXPERT - ---help--- - This enables support for font mapping and Unicode translation - on virtual consoles. - -config VT_CONSOLE - bool "Support for console on virtual terminal" if EXPERT - depends on VT - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - depends on VT && !S390 && !UML - default y - -config VT_HW_CONSOLE_BINDING - bool "Support for binding and unbinding console drivers" - depends on HW_CONSOLE - default n - ---help--- - The virtual terminal is the device that interacts with the physical - terminal through console drivers. On these systems, at least one - console driver is loaded. In other configurations, additional console - drivers may be enabled, such as the framebuffer console. If more than - 1 console driver is enabled, setting this to 'y' will allow you to - select the console driver that will serve as the backend for the - virtual terminals. - - See <file:Documentation/console/console.txt> for more - information. For framebuffer console users, please refer to - <file:Documentation/fb/fbcon.txt>. +source "drivers/tty/Kconfig" config DEVKMEM bool "/dev/kmem virtual device support" @@ -97,253 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config BFIN_JTAG_COMM - tristate "Blackfin JTAG Communication" - depends on BLACKFIN - help - Add support for emulating a TTY device over the Blackfin JTAG. - - To compile this driver as a module, choose M here: the - module will be called bfin_jtag_comm. - -config BFIN_JTAG_COMM_CONSOLE - bool "Console on Blackfin JTAG" - depends on BFIN_JTAG_COMM=y - -config SERIAL_NONSTANDARD - bool "Non-standard serial port support" - depends on HAS_IOMEM - ---help--- - Say Y here if you have any non-standard serial boards -- boards - which aren't supported using the standard "dumb" serial driver. - This includes intelligent serial boards such as Cyclades, - Digiboards, etc. These are usually used for systems that need many - serial ports because they serve many terminals or dial-in - connections. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about non-standard serial boards. - - Most people can say N here. - -config COMPUTONE - tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - ---help--- - This driver supports the entire family of Intelliport II/Plus - controllers with the exception of the MicroChannel controllers and - products previous to the Intelliport II. These are multiport cards, - which give you many serial ports. You would need something like this - to connect more than two modems to your Linux box, for instance in - order to become a dial-in server. If you have a card like that, say - Y here and read <file:Documentation/serial/computone.txt>. - - To compile this driver as module, choose M here: the - module will be called ip2. - -config ROCKETPORT - tristate "Comtrol RocketPort support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - help - This driver supports Comtrol RocketPort and RocketModem PCI boards. - These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or - modems. For information about the RocketPort/RocketModem boards - and this driver read <file:Documentation/serial/rocket.txt>. - - To compile this driver as a module, choose M here: the - module will be called rocket. - - If you want to compile this driver into the kernel, say Y here. If - you don't have a Comtrol RocketPort/RocketModem card installed, say N. - -config CYCLADES - tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD && (PCI || ISA) - select FW_LOADER - ---help--- - This driver supports Cyclades Z and Y multiserial boards. - You would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - For information about the Cyclades-Z card, read - <file:Documentation/serial/README.cycladesZ>. - - To compile this driver as a module, choose M here: the - module will be called cyclades. - - If you haven't heard about it, it's safe to say N. - -config CYZ_INTR - bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" - depends on EXPERIMENTAL && CYCLADES - help - The Cyclades-Z family of multiport cards allows 2 (two) driver op - modes: polling and interrupt. In polling mode, the driver will check - the status of the Cyclades-Z ports every certain amount of time - (which is called polling cycle and is configurable). In interrupt - mode, it will use an interrupt line (IRQ) in order to check the - status of the Cyclades-Z ports. The default op mode is polling. If - unsure, say N. - -config DIGIEPCA - tristate "Digiboard Intelligent Async Support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - ---help--- - This is a driver for Digi International's Xx, Xeve, and Xem series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports the original PC (ISA) boards as well as PCI, and EISA. If - you have a card like this, say Y here and read the file - <file:Documentation/serial/digiepca.txt>. - - To compile this driver as a module, choose M here: the - module will be called epca. - -config MOXA_INTELLIO - tristate "Moxa Intellio support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - select FW_LOADER - help - Say Y here if you have a Moxa Intellio multiport serial card. - - To compile this driver as a module, choose M here: the - module will be called moxa. - -config MOXA_SMARTIO - tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) - help - Say Y here if you have a Moxa SmartIO multiport serial card and/or - want to help develop a new version of this driver. - - This is upgraded (1.9.1) driver from original Moxa drivers with - changes finally resulting in PCI probing. - - This driver can also be built as a module. The module will be called - mxser. If you want to do that, say M here. - -config ISI - tristate "Multi-Tech multiport card support (EXPERIMENTAL)" - depends on SERIAL_NONSTANDARD && PCI - select FW_LOADER - help - This is a driver for the Multi-Tech cards which provide several - serial ports. The driver is experimental and can currently only be - built as a module. The module will be called isicom. - If you want to do that, choose M here. - -config SYNCLINK - tristate "Microgate SyncLink card support" - depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API - help - Provides support for the SyncLink ISA and PCI multiprotocol serial - adapters. These adapters support asynchronous and HDLC bit - synchronous communication up to 10Mbps (PCI adapter). - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclink. If you want to do that, say M - here. - -config SYNCLINKMP - tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD && PCI - help - Enable support for the SyncLink Multiport (2 or 4 ports) - serial adapter, running asynchronous and HDLC communications up - to 2.048Mbps. Each ports is independently selectable for - RS-232, V.35, RS-449, RS-530, and X.21 - - This driver may be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclinkmp. If you want to do that, say M - here. - -config SYNCLINK_GT - tristate "SyncLink GT/AC support" - depends on SERIAL_NONSTANDARD && PCI - help - Support for SyncLink GT and SyncLink AC families of - synchronous and asynchronous serial adapters - manufactured by Microgate Systems, Ltd. (www.microgate.com) - -config N_HDLC - tristate "HDLC line discipline support" - depends on SERIAL_NONSTANDARD - help - Allows synchronous HDLC communications with tty device drivers that - support synchronous HDLC such as the Microgate SyncLink adapter. - - This driver can be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called n_hdlc. If you want to do that, say M - here. - -config N_GSM - tristate "GSM MUX line discipline support (EXPERIMENTAL)" - depends on EXPERIMENTAL - depends on NET - help - This line discipline provides support for the GSM MUX protocol and - presents the mux as a set of 61 individual tty devices. - -config RISCOM8 - tristate "SDL RISCom/8 card support" - depends on SERIAL_NONSTANDARD - help - This is a driver for the SDL Communications RISCom/8 multiport card, - which gives you many serial ports. You would need something like - this to connect more than two modems to your Linux box, for instance - in order to become a dial-in server. If you have a card like that, - say Y here and read the file <file:Documentation/serial/riscom8.txt>. - - Also it's possible to say M here and compile this driver as kernel - loadable module; the module will be called riscom8. - -config SPECIALIX - tristate "Specialix IO8+ card support" - depends on SERIAL_NONSTANDARD - help - This is a driver for the Specialix IO8+ multiport card (both the - ISA and the PCI version) which gives you many serial ports. You - would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - If you have a card like that, say Y here and read the file - <file:Documentation/serial/specialix.txt>. Also it's possible to say - M here and compile this driver as kernel loadable module which will be - called specialix. - -config SX - tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN - help - This is a driver for the SX and SI multiport serial cards. - Please read the file <file:Documentation/serial/sx.txt> for details. - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called sx. If you want to do that, say M here. - -config RIO - tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD && BROKEN - help - This is a driver for the Specialix RIO, a smart serial card which - drives an outboard box that can support up to 128 ports. Product - information is at <http://www.perle.com/support/documentation.html#multiport>. - There are both ISA and PCI versions. - -config RIO_OLDPCI - bool "Support really old RIO/PCI cards" - depends on RIO - help - Older RIO PCI cards need some initialization-time configuration to - determine the IRQ and some control addresses. If you have a RIO and - this doesn't seem to work, try setting this to Y. - config STALDRV bool "Stallion multiport serial support" depends on SERIAL_NONSTANDARD @@ -356,54 +27,6 @@ config STALDRV in this case. If you have never heard about all this, it's safe to say N. -config STALLION - tristate "Stallion EasyIO or EC8/32 support" - depends on STALDRV && (ISA || EISA || PCI) - help - If you have an EasyIO or EasyConnection 8/32 multiport Stallion - card, then this is for you; say Y. Make sure to read - <file:Documentation/serial/stallion.txt>. - - To compile this driver as a module, choose M here: the - module will be called stallion. - -config ISTALLION - tristate "Stallion EC8/64, ONboard, Brumby support" - depends on STALDRV && (ISA || EISA || PCI) - help - If you have an EasyConnection 8/64, ONboard, Brumby or Stallion - serial multiport card, say Y here. Make sure to read - <file:Documentation/serial/stallion.txt>. - - To compile this driver as a module, choose M here: the - module will be called istallion. - -config NOZOMI - tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" - depends on PCI && EXPERIMENTAL - help - If you have a HSDPA driver Broadband Wireless Data Card - - Globe Trotter PCMCIA card, say Y here. - - To compile this driver as a module, choose M here, the module - will be called nozomi. - -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO && BROKEN - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - config SGI_SNSC bool "SGI Altix system controller communication support" depends on (IA64_SGI_SN2 || IA64_GENERIC) @@ -428,71 +51,6 @@ config SGI_MBCS source "drivers/tty/serial/Kconfig" -config UNIX98_PTYS - bool "Unix98 PTY support" if EXPERT - default y - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/<number>. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - All modern Linux systems use the Unix98 ptys. Say Y unless - you're on an embedded system and want to conserve memory. - -config DEVPTS_MULTIPLE_INSTANCES - bool "Support multiple instances of devpts" - depends on UNIX98_PTYS - default n - ---help--- - Enable support for multiple instances of devpts filesystem. - If you want to have isolated PTY namespaces (eg: in containers), - say Y here. Otherwise, say N. If enabled, each mount of devpts - filesystem with the '-o newinstance' option will create an - independent PTY namespace. - -config LEGACY_PTYS - bool "Legacy (BSD) PTY support" - default y - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx - for masters and /dev/ttyxx for slaves of pseudo - terminals. This scheme has a number of problems, including - security. This option enables these legacy devices; on most - systems, it is safe to say N. - - -config LEGACY_PTY_COUNT - int "Maximum number of legacy PTY in use" - depends on LEGACY_PTYS - range 0 256 - default "256" - ---help--- - The maximum number of legacy PTYs that can be used at any one time. - The default is 256, and should be more than enough. Embedded - systems may want to reduce this to save memory. - - When not in use, each legacy PTY occupies 12 bytes on 32-bit - architectures and 24 bytes on 64-bit architectures. - config TTY_PRINTK bool "TTY driver to output user messages via printk" depends on EXPERT @@ -612,84 +170,7 @@ config PPDEV If unsure, say N. -config HVC_DRIVER - bool - help - Generic "hypervisor virtual console" infrastructure for various - hypervisors (pSeries, iSeries, Xen, lguest). - It will automatically be selected if one of the back-end console drivers - is selected. - -config HVC_IRQ - bool - -config HVC_CONSOLE - bool "pSeries Hypervisor Virtual Console support" - depends on PPC_PSERIES - select HVC_DRIVER - select HVC_IRQ - help - pSeries machines when partitioned support a hypervisor virtual - console. This driver allows each pSeries partition to have a console - which is accessed via the HMC. - -config HVC_ISERIES - bool "iSeries Hypervisor Virtual Console support" - depends on PPC_ISERIES - default y - select HVC_DRIVER - select HVC_IRQ - select VIOPATH - help - iSeries machines support a hypervisor virtual console. - -config HVC_RTAS - bool "IBM RTAS Console support" - depends on PPC_RTAS - select HVC_DRIVER - help - IBM Console device driver which makes use of RTAS - -config HVC_BEAT - bool "Toshiba's Beat Hypervisor Console support" - depends on PPC_CELLEB - select HVC_DRIVER - help - Toshiba's Cell Reference Set Beat Console device driver - -config HVC_IUCV - bool "z/VM IUCV Hypervisor console support (VM only)" - depends on S390 - select HVC_DRIVER - select IUCV - default y - help - This driver provides a Hypervisor console (HVC) back-end to access - a Linux (console) terminal via a z/VM IUCV communication path. - -config HVC_XEN - bool "Xen Hypervisor Console support" - depends on XEN - select HVC_DRIVER - select HVC_IRQ - default y - help - Xen virtual console device driver - -config HVC_UDBG - bool "udbg based fake hypervisor console" - depends on PPC && EXPERIMENTAL - select HVC_DRIVER - default n - -config HVC_DCC - bool "ARM JTAG DCC console" - depends on ARM - select HVC_DRIVER - help - This console uses the JTAG DCC on ARM to create a console under the HVC - driver. This console is used through a JTAG only on ARM. If you don't have - a JTAG then you probably don't want this option. +source "drivers/tty/hvc/Kconfig" config VIRTIO_CONSOLE tristate "Virtio console" @@ -707,23 +188,6 @@ config VIRTIO_CONSOLE the port which can be used by udev scripts to create a symlink to the device. -config HVCS - tristate "IBM Hypervisor Virtual Console Server support" - depends on PPC_PSERIES && HVC_CONSOLE - help - Partitionable IBM Power5 ppc64 machines allow hosting of - firmware virtual consoles from one Linux partition by - another Linux partition. This driver allows console data - from Linux partitions to be accessed through TTY device - interfaces in the device tree of a Linux partition running - this driver. - - To compile this driver as a module, choose M here: the - module will be called hvcs. Additionally, this module - will depend on arch specific APIs exported from hvcserver.ko - which will also be compiled when this driver is built as a - module. - config IBM_BSR tristate "IBM POWER Barrier Synchronization Register support" depends on PPC_PSERIES diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 8238f89f73c9..057f65452e7b 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -5,31 +5,7 @@ obj-y += mem.o random.o obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o obj-y += misc.o -obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o -obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_ROCKETPORT) += rocket.o -obj-$(CONFIG_SERIAL167) += serial167.o -obj-$(CONFIG_CYCLADES) += cyclades.o -obj-$(CONFIG_STALLION) += stallion.o -obj-$(CONFIG_ISTALLION) += istallion.o -obj-$(CONFIG_NOZOMI) += nozomi.o -obj-$(CONFIG_DIGIEPCA) += epca.o -obj-$(CONFIG_SPECIALIX) += specialix.o -obj-$(CONFIG_MOXA_INTELLIO) += moxa.o -obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_MOXA_SMARTIO) += mxser.o -obj-$(CONFIG_COMPUTONE) += ip2/ -obj-$(CONFIG_RISCOM8) += riscom8.o -obj-$(CONFIG_ISI) += isicom.o -obj-$(CONFIG_SYNCLINK) += synclink.o -obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o -obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o -obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o -obj-$(CONFIG_SX) += sx.o generic_serial.o -obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile index be8f287aa398..0aae20985d57 100644 --- a/drivers/char/pcmcia/Makefile +++ b/drivers/char/pcmcia/Makefile @@ -4,8 +4,6 @@ # Makefile for the Linux PCMCIA char device drivers. # -obj-y += ipwireless/ - obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index eaa41992fbe2..beca80bb9bdb 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -418,9 +418,9 @@ static void bh_status(MGSLPC_INFO *info); /* * ioctl handlers */ -static int tiocmget(struct tty_struct *tty, struct file *file); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty); @@ -2114,7 +2114,7 @@ static int modem_input_wait(MGSLPC_INFO *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; unsigned int result; @@ -2139,7 +2139,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; @@ -2222,13 +2222,12 @@ static int mgslpc_get_icount(struct tty_struct *tty, * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, +static int mgslpc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index c40c1612c8a7..a1f68af4ccf4 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -144,7 +144,7 @@ static int tpk_write_room(struct tty_struct *tty) /* * TTY operations ioctl function. */ -static int tpk_ioctl(struct tty_struct *tty, struct file *file, +static int tpk_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct ttyprintk_port *tpkp = tty->driver_data; diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index f80a7c48a35f..0d7088367038 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1219,16 +1219,10 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty) return mp->outbytes; } -static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file, +static int capinc_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - int error = 0; - switch (cmd) { - default: - error = n_tty_ioctl_helper(tty, file, cmd, arg); - break; - } - return error; + return -ENOIOCTLCMD; } static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old) diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index bb710d16a526..59de638225fe 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -115,15 +115,15 @@ static int if_config(struct cardstate *cs, int *arg) static int if_open(struct tty_struct *tty, struct file *filp); static void if_close(struct tty_struct *tty, struct file *filp); -static int if_ioctl(struct tty_struct *tty, struct file *file, +static int if_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int if_write_room(struct tty_struct *tty); static int if_chars_in_buffer(struct tty_struct *tty); static void if_throttle(struct tty_struct *tty); static void if_unthrottle(struct tty_struct *tty); static void if_set_termios(struct tty_struct *tty, struct ktermios *old); -static int if_tiocmget(struct tty_struct *tty, struct file *file); -static int if_tiocmset(struct tty_struct *tty, struct file *file, +static int if_tiocmget(struct tty_struct *tty); +static int if_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int if_write(struct tty_struct *tty, const unsigned char *buf, int count); @@ -205,7 +205,7 @@ static void if_close(struct tty_struct *tty, struct file *filp) module_put(cs->driver->owner); } -static int if_ioctl(struct tty_struct *tty, struct file *file, +static int if_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cardstate *cs; @@ -280,7 +280,7 @@ static int if_ioctl(struct tty_struct *tty, struct file *file, return retval; } -static int if_tiocmget(struct tty_struct *tty, struct file *file) +static int if_tiocmget(struct tty_struct *tty) { struct cardstate *cs; int retval; @@ -303,7 +303,7 @@ static int if_tiocmget(struct tty_struct *tty, struct file *file) return retval; } -static int if_tiocmset(struct tty_struct *tty, struct file *file, +static int if_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cardstate *cs; diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index 0ef09d0eb96b..86a5c4f7775e 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -440,7 +440,7 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, if (!set && !clear) return 0; gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear); - return tty->ops->tiocmset(tty, NULL, set, clear); + return tty->ops->tiocmset(tty, set, clear); } static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index c463162843ba..3d88f15aa218 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1345,7 +1345,7 @@ isdn_tty_get_lsr_info(modem_info * info, uint __user * value) static int -isdn_tty_tiocmget(struct tty_struct *tty, struct file *file) +isdn_tty_tiocmget(struct tty_struct *tty) { modem_info *info = (modem_info *) tty->driver_data; u_char control, status; @@ -1372,7 +1372,7 @@ isdn_tty_tiocmget(struct tty_struct *tty, struct file *file) } static int -isdn_tty_tiocmset(struct tty_struct *tty, struct file *file, +isdn_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { modem_info *info = (modem_info *) tty->driver_data; @@ -1413,8 +1413,7 @@ isdn_tty_tiocmset(struct tty_struct *tty, struct file *file, } static int -isdn_tty_ioctl(struct tty_struct *tty, struct file *file, - uint cmd, ulong arg) +isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg) { modem_info *info = (modem_info *) tty->driver_data; int retval; diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 98bffc471b17..380ba806495d 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -27,6 +27,7 @@ #include <linux/mutex.h> #include <linux/if_ether.h> #include <linux/ctype.h> +#include <linux/dmi.h> #define PHUB_STATUS 0x00 /* Status Register offset */ #define PHUB_CONTROL 0x04 /* Control Register offset */ @@ -46,6 +47,17 @@ #define PCH_MINOR_NOS 1 #define CLKCFG_CAN_50MHZ 0x12000000 #define CLKCFG_CANCLK_MASK 0xFF000000 +#define CLKCFG_UART_MASK 0xFFFFFF + +/* CM-iTC */ +#define CLKCFG_UART_48MHZ (1 << 16) +#define CLKCFG_BAUDDIV (2 << 20) +#define CLKCFG_PLL2VCO (8 << 9) +#define CLKCFG_UARTCLKSEL (1 << 18) + +/* Macros for ML7213 */ +#define PCI_VENDOR_ID_ROHM 0x10db +#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A /* Macros for ML7213 */ #define PCI_VENDOR_ID_ROHM 0x10db @@ -618,6 +630,14 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK); + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + pch_phub_read_modify_write_reg(chip, + (unsigned int)CLKCFG_REG_OFFSET, + CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV | + CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL, + CLKCFG_UART_MASK); + /* set the prefech value */ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); /* set the interrupt delay value */ diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index a0716967b7c8..c8c9edb3d7cb 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -956,7 +956,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) return 0; } -static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) +static int sdio_uart_tiocmget(struct tty_struct *tty) { struct sdio_uart_port *port = tty->driver_data; int result; @@ -970,7 +970,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file, +static int sdio_uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct sdio_uart_port *port = tty->driver_data; diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index ee1dde52e8fc..3352b2443e58 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -167,7 +167,7 @@ static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts) * let's be careful... Jean II */ IRDA_ASSERT(priv->tty->ops->tiocmset != NULL, return -1;); - priv->tty->ops->tiocmset(priv->tty, NULL, set, clear); + priv->tty->ops->tiocmset(priv->tty, set, clear); return 0; } diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 6d83812603b6..387ca43f26f4 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -324,7 +324,7 @@ struct hso_device { /* Prototypes */ /*****************************************************************************/ /* Serial driver functions */ -static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, +static int hso_serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void ctrl_callback(struct urb *urb); static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial); @@ -1335,7 +1335,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) /* done */ if (result) - hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0); + hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0); err_out: mutex_unlock(&serial->parent->mutex); return result; @@ -1656,7 +1656,7 @@ static int hso_get_count(struct tty_struct *tty, } -static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file) +static int hso_serial_tiocmget(struct tty_struct *tty) { int retval; struct hso_serial *serial = get_serial_by_tty(tty); @@ -1687,7 +1687,7 @@ static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file) return retval; } -static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, +static int hso_serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { int val = 0; @@ -1730,7 +1730,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file, USB_CTRL_SET_TIMEOUT); } -static int hso_serial_ioctl(struct tty_struct *tty, struct file *file, +static int hso_serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct hso_serial *serial = get_serial_by_tty(tty); diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c index 515d9b8af01e..1c65d1c33873 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/net/wan/pc300_tty.c @@ -131,9 +131,8 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); -static int pc300_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -static int pc300_tiocmget(struct tty_struct *, struct file *); +static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int); +static int pc300_tiocmget(struct tty_struct *); /* functions called by PC300 driver */ void cpc_tty_init(pc300dev_t *dev); @@ -543,7 +542,7 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty) return 0; } -static int pc300_tiocmset(struct tty_struct *tty, struct file *file, +static int pc300_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { st_cpc_tty_area *cpc_tty; @@ -570,7 +569,7 @@ static int pc300_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int pc300_tiocmget(struct tty_struct *tty, struct file *file) +static int pc300_tiocmget(struct tty_struct *tty) { unsigned int result; unsigned char status; diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c index 5ad44daef73b..806588192483 100644 --- a/drivers/s390/char/keyboard.c +++ b/drivers/s390/char/keyboard.c @@ -455,9 +455,7 @@ do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs, return 0; } -int -kbd_ioctl(struct kbd_data *kbd, struct file *file, - unsigned int cmd, unsigned long arg) +int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg) { void __user *argp; unsigned int ct; diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h index 5ccfe9cf126d..7e736aaeae6e 100644 --- a/drivers/s390/char/keyboard.h +++ b/drivers/s390/char/keyboard.h @@ -36,7 +36,7 @@ void kbd_free(struct kbd_data *); void kbd_ascebc(struct kbd_data *, unsigned char *); void kbd_keycode(struct kbd_data *, unsigned int); -int kbd_ioctl(struct kbd_data *, struct file *, unsigned int, unsigned long); +int kbd_ioctl(struct kbd_data *, unsigned int, unsigned long); /* * Helper Functions. diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index 911822db614d..d33554df2b06 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -1718,9 +1718,8 @@ tty3270_wait_until_sent(struct tty_struct *tty, int timeout) { } -static int -tty3270_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +static int tty3270_ioctl(struct tty_struct *tty, unsigned int cmd, + unsigned long arg) { struct tty3270 *tp; @@ -1729,13 +1728,12 @@ tty3270_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; - return kbd_ioctl(tp->kbd, file, cmd, arg); + return kbd_ioctl(tp->kbd, cmd, arg); } #ifdef CONFIG_COMPAT -static long -tty3270_compat_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +static long tty3270_compat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) { struct tty3270 *tp; @@ -1744,7 +1742,7 @@ tty3270_compat_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; - return kbd_ioctl(tp->kbd, file, cmd, (unsigned long)compat_ptr(arg)); + return kbd_ioctl(tp->kbd, cmd, (unsigned long)compat_ptr(arg)); } #endif diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 5c8fcfc42c3e..58e4a8e15a0e 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -41,6 +41,10 @@ config STAGING_EXCLUDE_BUILD if !STAGING_EXCLUDE_BUILD +source "drivers/staging/tty/Kconfig" + +source "drivers/staging/generic_serial/Kconfig" + source "drivers/staging/et131x/Kconfig" source "drivers/staging/slicoss/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index d53886317826..ff7372d25c91 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -3,6 +3,8 @@ # fix for build system bug... obj-$(CONFIG_STAGING) += staging.o +obj-y += tty/ +obj-y += generic_serial/ obj-$(CONFIG_ET131X) += et131x/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ diff --git a/drivers/staging/generic_serial/Kconfig b/drivers/staging/generic_serial/Kconfig new file mode 100644 index 000000000000..795daea37750 --- /dev/null +++ b/drivers/staging/generic_serial/Kconfig @@ -0,0 +1,45 @@ +config A2232 + tristate "Commodore A2232 serial support (EXPERIMENTAL)" + depends on EXPERIMENTAL && ZORRO && BROKEN + ---help--- + This option supports the 2232 7-port serial card shipped with the + Amiga 2000 and other Zorro-bus machines, dating from 1989. At + a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip + each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The + ports were connected with 8 pin DIN connectors on the card bracket, + for which 8 pin to DB25 adapters were supplied. The card also had + jumpers internally to toggle various pinning configurations. + + This driver can be built as a module; but then "generic_serial" + will also be built as a module. This has to be loaded before + "ser_a2232". If you want to do this, answer M here. + +config SX + tristate "Specialix SX (and SI) card support" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN + help + This is a driver for the SX and SI multiport serial cards. + Please read the file <file:Documentation/serial/sx.txt> for details. + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called sx. If you want to do that, say M here. + +config RIO + tristate "Specialix RIO system support" + depends on SERIAL_NONSTANDARD && BROKEN + help + This is a driver for the Specialix RIO, a smart serial card which + drives an outboard box that can support up to 128 ports. Product + information is at <http://www.perle.com/support/documentation.html#multiport>. + There are both ISA and PCI versions. + +config RIO_OLDPCI + bool "Support really old RIO/PCI cards" + depends on RIO + help + Older RIO PCI cards need some initialization-time configuration to + determine the IRQ and some control addresses. If you have a RIO and + this doesn't seem to work, try setting this to Y. + + diff --git a/drivers/staging/generic_serial/Makefile b/drivers/staging/generic_serial/Makefile new file mode 100644 index 000000000000..ffc90c8b013c --- /dev/null +++ b/drivers/staging/generic_serial/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o +obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o +obj-$(CONFIG_SX) += sx.o generic_serial.o +obj-$(CONFIG_RIO) += rio/ generic_serial.o diff --git a/drivers/staging/generic_serial/TODO b/drivers/staging/generic_serial/TODO new file mode 100644 index 000000000000..88756453ac6c --- /dev/null +++ b/drivers/staging/generic_serial/TODO @@ -0,0 +1,6 @@ +These are a few tty/serial drivers that either do not build, +or work if they do build, or if they seem to work, are for obsolete +hardware, or are full of unfixable races and no one uses them anymore. + +If no one steps up to adopt any of these drivers, they will be removed +in the 2.6.41 release. diff --git a/drivers/char/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c index 5954ee1dc953..466988dbc37d 100644 --- a/drivers/char/generic_serial.c +++ b/drivers/staging/generic_serial/generic_serial.c @@ -566,9 +566,9 @@ void gs_close(struct tty_struct * tty, struct file * filp) * line status register. */ - spin_lock_irqsave(&port->driver_lock, flags); + spin_lock(&port->driver_lock); port->rd->disable_rx_interrupts (port); - spin_unlock_irqrestore(&port->driver_lock, flags); + spin_unlock(&port->driver_lock); spin_unlock_irqrestore(&port->port.lock, flags); /* close has no way of returning "EINTR", so discard return value */ diff --git a/drivers/char/rio/Makefile b/drivers/staging/generic_serial/rio/Makefile index 1661875883fb..1661875883fb 100644 --- a/drivers/char/rio/Makefile +++ b/drivers/staging/generic_serial/rio/Makefile diff --git a/drivers/char/rio/board.h b/drivers/staging/generic_serial/rio/board.h index bdea633a9076..bdea633a9076 100644 --- a/drivers/char/rio/board.h +++ b/drivers/staging/generic_serial/rio/board.h diff --git a/drivers/char/rio/cirrus.h b/drivers/staging/generic_serial/rio/cirrus.h index 5ab51679caa2..5ab51679caa2 100644 --- a/drivers/char/rio/cirrus.h +++ b/drivers/staging/generic_serial/rio/cirrus.h diff --git a/drivers/char/rio/cmdblk.h b/drivers/staging/generic_serial/rio/cmdblk.h index 9ed4f861675a..9ed4f861675a 100644 --- a/drivers/char/rio/cmdblk.h +++ b/drivers/staging/generic_serial/rio/cmdblk.h diff --git a/drivers/char/rio/cmdpkt.h b/drivers/staging/generic_serial/rio/cmdpkt.h index c1e7a2798070..c1e7a2798070 100644 --- a/drivers/char/rio/cmdpkt.h +++ b/drivers/staging/generic_serial/rio/cmdpkt.h diff --git a/drivers/char/rio/daemon.h b/drivers/staging/generic_serial/rio/daemon.h index 4af90323fd00..4af90323fd00 100644 --- a/drivers/char/rio/daemon.h +++ b/drivers/staging/generic_serial/rio/daemon.h diff --git a/drivers/char/rio/errors.h b/drivers/staging/generic_serial/rio/errors.h index bdb05234090a..bdb05234090a 100644 --- a/drivers/char/rio/errors.h +++ b/drivers/staging/generic_serial/rio/errors.h diff --git a/drivers/char/rio/func.h b/drivers/staging/generic_serial/rio/func.h index 078d44f85e45..078d44f85e45 100644 --- a/drivers/char/rio/func.h +++ b/drivers/staging/generic_serial/rio/func.h diff --git a/drivers/char/rio/host.h b/drivers/staging/generic_serial/rio/host.h index 78f24540c224..78f24540c224 100644 --- a/drivers/char/rio/host.h +++ b/drivers/staging/generic_serial/rio/host.h diff --git a/drivers/char/rio/link.h b/drivers/staging/generic_serial/rio/link.h index f3bf11a04d41..f3bf11a04d41 100644 --- a/drivers/char/rio/link.h +++ b/drivers/staging/generic_serial/rio/link.h diff --git a/drivers/char/rio/linux_compat.h b/drivers/staging/generic_serial/rio/linux_compat.h index 34c0d2899ef1..34c0d2899ef1 100644 --- a/drivers/char/rio/linux_compat.h +++ b/drivers/staging/generic_serial/rio/linux_compat.h diff --git a/drivers/char/rio/map.h b/drivers/staging/generic_serial/rio/map.h index 8366978578c1..8366978578c1 100644 --- a/drivers/char/rio/map.h +++ b/drivers/staging/generic_serial/rio/map.h diff --git a/drivers/char/rio/param.h b/drivers/staging/generic_serial/rio/param.h index 7e9b6283e8aa..7e9b6283e8aa 100644 --- a/drivers/char/rio/param.h +++ b/drivers/staging/generic_serial/rio/param.h diff --git a/drivers/char/rio/parmmap.h b/drivers/staging/generic_serial/rio/parmmap.h index acc8fa439df5..acc8fa439df5 100644 --- a/drivers/char/rio/parmmap.h +++ b/drivers/staging/generic_serial/rio/parmmap.h diff --git a/drivers/char/rio/pci.h b/drivers/staging/generic_serial/rio/pci.h index 6032f9135956..6032f9135956 100644 --- a/drivers/char/rio/pci.h +++ b/drivers/staging/generic_serial/rio/pci.h diff --git a/drivers/char/rio/phb.h b/drivers/staging/generic_serial/rio/phb.h index a4c48ae4e365..a4c48ae4e365 100644 --- a/drivers/char/rio/phb.h +++ b/drivers/staging/generic_serial/rio/phb.h diff --git a/drivers/char/rio/pkt.h b/drivers/staging/generic_serial/rio/pkt.h index a9458164f02f..a9458164f02f 100644 --- a/drivers/char/rio/pkt.h +++ b/drivers/staging/generic_serial/rio/pkt.h diff --git a/drivers/char/rio/port.h b/drivers/staging/generic_serial/rio/port.h index 49cf6d15ee54..49cf6d15ee54 100644 --- a/drivers/char/rio/port.h +++ b/drivers/staging/generic_serial/rio/port.h diff --git a/drivers/char/rio/protsts.h b/drivers/staging/generic_serial/rio/protsts.h index 8ab79401d3ee..8ab79401d3ee 100644 --- a/drivers/char/rio/protsts.h +++ b/drivers/staging/generic_serial/rio/protsts.h diff --git a/drivers/char/rio/rio.h b/drivers/staging/generic_serial/rio/rio.h index 1bf36223a4e8..1bf36223a4e8 100644 --- a/drivers/char/rio/rio.h +++ b/drivers/staging/generic_serial/rio/rio.h diff --git a/drivers/char/rio/rio_linux.c b/drivers/staging/generic_serial/rio/rio_linux.c index 5e33293d24e3..5e33293d24e3 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/staging/generic_serial/rio/rio_linux.c diff --git a/drivers/char/rio/rio_linux.h b/drivers/staging/generic_serial/rio/rio_linux.h index 7f26cd7c815e..7f26cd7c815e 100644 --- a/drivers/char/rio/rio_linux.h +++ b/drivers/staging/generic_serial/rio/rio_linux.h diff --git a/drivers/char/rio/rioboard.h b/drivers/staging/generic_serial/rio/rioboard.h index 252230043c82..252230043c82 100644 --- a/drivers/char/rio/rioboard.h +++ b/drivers/staging/generic_serial/rio/rioboard.h diff --git a/drivers/char/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c index d956dd316005..d956dd316005 100644 --- a/drivers/char/rio/rioboot.c +++ b/drivers/staging/generic_serial/rio/rioboot.c diff --git a/drivers/char/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c index f121357e5af0..f121357e5af0 100644 --- a/drivers/char/rio/riocmd.c +++ b/drivers/staging/generic_serial/rio/riocmd.c diff --git a/drivers/char/rio/rioctrl.c b/drivers/staging/generic_serial/rio/rioctrl.c index 780506326a73..780506326a73 100644 --- a/drivers/char/rio/rioctrl.c +++ b/drivers/staging/generic_serial/rio/rioctrl.c diff --git a/drivers/char/rio/riodrvr.h b/drivers/staging/generic_serial/rio/riodrvr.h index 0907e711b355..0907e711b355 100644 --- a/drivers/char/rio/riodrvr.h +++ b/drivers/staging/generic_serial/rio/riodrvr.h diff --git a/drivers/char/rio/rioinfo.h b/drivers/staging/generic_serial/rio/rioinfo.h index 42ff1e79d96f..42ff1e79d96f 100644 --- a/drivers/char/rio/rioinfo.h +++ b/drivers/staging/generic_serial/rio/rioinfo.h diff --git a/drivers/char/rio/rioinit.c b/drivers/staging/generic_serial/rio/rioinit.c index 24a282bb89d4..24a282bb89d4 100644 --- a/drivers/char/rio/rioinit.c +++ b/drivers/staging/generic_serial/rio/rioinit.c diff --git a/drivers/char/rio/riointr.c b/drivers/staging/generic_serial/rio/riointr.c index 2e71aecae206..2e71aecae206 100644 --- a/drivers/char/rio/riointr.c +++ b/drivers/staging/generic_serial/rio/riointr.c diff --git a/drivers/char/rio/rioioctl.h b/drivers/staging/generic_serial/rio/rioioctl.h index e8af5b30519e..e8af5b30519e 100644 --- a/drivers/char/rio/rioioctl.h +++ b/drivers/staging/generic_serial/rio/rioioctl.h diff --git a/drivers/char/rio/rioparam.c b/drivers/staging/generic_serial/rio/rioparam.c index 6415f3f32a72..6415f3f32a72 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/staging/generic_serial/rio/rioparam.c diff --git a/drivers/char/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c index f9b936ac3394..f9b936ac3394 100644 --- a/drivers/char/rio/rioroute.c +++ b/drivers/staging/generic_serial/rio/rioroute.c diff --git a/drivers/char/rio/riospace.h b/drivers/staging/generic_serial/rio/riospace.h index ffb31d4332b9..ffb31d4332b9 100644 --- a/drivers/char/rio/riospace.h +++ b/drivers/staging/generic_serial/rio/riospace.h diff --git a/drivers/char/rio/riotable.c b/drivers/staging/generic_serial/rio/riotable.c index 3d15802dc0f3..3d15802dc0f3 100644 --- a/drivers/char/rio/riotable.c +++ b/drivers/staging/generic_serial/rio/riotable.c diff --git a/drivers/char/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c index 8a90393faf3c..8a90393faf3c 100644 --- a/drivers/char/rio/riotty.c +++ b/drivers/staging/generic_serial/rio/riotty.c diff --git a/drivers/char/rio/route.h b/drivers/staging/generic_serial/rio/route.h index 46e963771c30..46e963771c30 100644 --- a/drivers/char/rio/route.h +++ b/drivers/staging/generic_serial/rio/route.h diff --git a/drivers/char/rio/rup.h b/drivers/staging/generic_serial/rio/rup.h index 4ae90cb207a9..4ae90cb207a9 100644 --- a/drivers/char/rio/rup.h +++ b/drivers/staging/generic_serial/rio/rup.h diff --git a/drivers/char/rio/unixrup.h b/drivers/staging/generic_serial/rio/unixrup.h index 7abf0cba0f2c..7abf0cba0f2c 100644 --- a/drivers/char/rio/unixrup.h +++ b/drivers/staging/generic_serial/rio/unixrup.h diff --git a/drivers/char/ser_a2232.c b/drivers/staging/generic_serial/ser_a2232.c index 9610861d1f5f..3f47c2ead8e5 100644 --- a/drivers/char/ser_a2232.c +++ b/drivers/staging/generic_serial/ser_a2232.c @@ -133,8 +133,8 @@ static void a2232_hungup(void *ptr); /* END GENERIC_SERIAL PROTOTYPES */ /* Functions that the TTY driver struct expects */ -static int a2232_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg); +static int a2232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); static void a2232_throttle(struct tty_struct *tty); static void a2232_unthrottle(struct tty_struct *tty); static int a2232_open(struct tty_struct * tty, struct file * filp); @@ -447,7 +447,7 @@ static void a2232_hungup(void *ptr) /*** END OF REAL_DRIVER FUNCTIONS ***/ /*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ -static int a2232_ioctl( struct tty_struct *tty, struct file *file, +static int a2232_ioctl( struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/char/ser_a2232.h b/drivers/staging/generic_serial/ser_a2232.h index bc09eb9e118b..bc09eb9e118b 100644 --- a/drivers/char/ser_a2232.h +++ b/drivers/staging/generic_serial/ser_a2232.h diff --git a/drivers/char/ser_a2232fw.ax b/drivers/staging/generic_serial/ser_a2232fw.ax index 736438032768..736438032768 100644 --- a/drivers/char/ser_a2232fw.ax +++ b/drivers/staging/generic_serial/ser_a2232fw.ax diff --git a/drivers/char/ser_a2232fw.h b/drivers/staging/generic_serial/ser_a2232fw.h index e09a30acfe5c..e09a30acfe5c 100644 --- a/drivers/char/ser_a2232fw.h +++ b/drivers/staging/generic_serial/ser_a2232fw.h diff --git a/drivers/char/sx.c b/drivers/staging/generic_serial/sx.c index a786326cea2f..1291462bcddb 100644 --- a/drivers/char/sx.c +++ b/drivers/staging/generic_serial/sx.c @@ -1873,14 +1873,14 @@ static int sx_break(struct tty_struct *tty, int flag) return 0; } -static int sx_tiocmget(struct tty_struct *tty, struct file *file) +static int sx_tiocmget(struct tty_struct *tty) { struct sx_port *port = tty->driver_data; return sx_getsignals(port); } -static int sx_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int sx_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct sx_port *port = tty->driver_data; int rts = -1, dtr = -1; @@ -1899,7 +1899,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int sx_ioctl(struct tty_struct *tty, struct file *filp, +static int sx_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int rc; diff --git a/drivers/char/sx.h b/drivers/staging/generic_serial/sx.h index 87c2defdead7..87c2defdead7 100644 --- a/drivers/char/sx.h +++ b/drivers/staging/generic_serial/sx.h diff --git a/drivers/char/sxboards.h b/drivers/staging/generic_serial/sxboards.h index 427927dc7dbf..427927dc7dbf 100644 --- a/drivers/char/sxboards.h +++ b/drivers/staging/generic_serial/sxboards.h diff --git a/drivers/char/sxwindow.h b/drivers/staging/generic_serial/sxwindow.h index cf01b662aefc..cf01b662aefc 100644 --- a/drivers/char/sxwindow.h +++ b/drivers/staging/generic_serial/sxwindow.h diff --git a/drivers/char/vme_scc.c b/drivers/staging/generic_serial/vme_scc.c index 12de1202d22c..96838640f575 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/staging/generic_serial/vme_scc.c @@ -75,7 +75,7 @@ static void scc_hungup(void *ptr); static void scc_close(void *ptr); static int scc_chars_in_buffer(void * ptr); static int scc_open(struct tty_struct * tty, struct file * filp); -static int scc_ioctl(struct tty_struct * tty, struct file * filp, +static int scc_ioctl(struct tty_struct * tty, unsigned int cmd, unsigned long arg); static void scc_throttle(struct tty_struct *tty); static void scc_unthrottle(struct tty_struct *tty); @@ -1046,7 +1046,7 @@ static void scc_unthrottle (struct tty_struct * tty) } -static int scc_ioctl(struct tty_struct *tty, struct file *file, +static int scc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index ed58f482c963..36b18e302718 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -852,7 +852,7 @@ static int qt2_chars_in_buffer(struct tty_struct *tty) * TIOCMGET and TIOCMSET are filtered off to their own methods before they get * here, so we don't have to handle them. */ -static int qt2_ioctl(struct tty_struct *tty, struct file *file, +static int qt2_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -1078,7 +1078,7 @@ static void qt2_set_termios(struct tty_struct *tty, } } -static int qt2_tiocmget(struct tty_struct *tty, struct file *file) +static int qt2_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; @@ -1121,7 +1121,7 @@ static int qt2_tiocmget(struct tty_struct *tty, struct file *file) } } -static int qt2_tiocmset(struct tty_struct *tty, struct file *file, +static int qt2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index 27841ef6a568..e0aae86a8809 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -1191,7 +1191,7 @@ static int qt_write_room(struct tty_struct *tty) } -static int qt_ioctl(struct tty_struct *tty, struct file *file, +static int qt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -1383,7 +1383,7 @@ static void qt_break(struct tty_struct *tty, int break_state) static inline int qt_real_tiocmget(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file, struct usb_serial *serial) + struct usb_serial *serial) { u8 mcr; @@ -1425,7 +1425,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty, static inline int qt_real_tiocmset(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file, struct usb_serial *serial, unsigned int value) { @@ -1462,7 +1461,7 @@ static inline int qt_real_tiocmset(struct tty_struct *tty, return 0; } -static int qt_tiocmget(struct tty_struct *tty, struct file *file) +static int qt_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = get_usb_serial(port, __func__); @@ -1480,13 +1479,13 @@ static int qt_tiocmget(struct tty_struct *tty, struct file *file) dbg("%s - port %d\n", __func__, port->number); dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmget(tty, port, file, serial); + retval = qt_real_tiocmget(tty, port, serial); spin_unlock_irqrestore(&qt_port->lock, flags); return retval; } -static int qt_tiocmset(struct tty_struct *tty, struct file *file, +static int qt_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { @@ -1506,7 +1505,7 @@ static int qt_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d\n", __func__, port->number); dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding); - retval = qt_real_tiocmset(tty, port, file, serial, set); + retval = qt_real_tiocmset(tty, port, serial, set); spin_unlock_irqrestore(&qt_port->lock, flags); return retval; diff --git a/drivers/staging/tty/Kconfig b/drivers/staging/tty/Kconfig new file mode 100644 index 000000000000..77103a07abbd --- /dev/null +++ b/drivers/staging/tty/Kconfig @@ -0,0 +1,87 @@ +config STALLION + tristate "Stallion EasyIO or EC8/32 support" + depends on STALDRV && (ISA || EISA || PCI) + help + If you have an EasyIO or EasyConnection 8/32 multiport Stallion + card, then this is for you; say Y. Make sure to read + <file:Documentation/serial/stallion.txt>. + + To compile this driver as a module, choose M here: the + module will be called stallion. + +config ISTALLION + tristate "Stallion EC8/64, ONboard, Brumby support" + depends on STALDRV && (ISA || EISA || PCI) + help + If you have an EasyConnection 8/64, ONboard, Brumby or Stallion + serial multiport card, say Y here. Make sure to read + <file:Documentation/serial/stallion.txt>. + + To compile this driver as a module, choose M here: the + module will be called istallion. + +config DIGIEPCA + tristate "Digiboard Intelligent Async Support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + ---help--- + This is a driver for Digi International's Xx, Xeve, and Xem series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports the original PC (ISA) boards as well as PCI, and EISA. If + you have a card like this, say Y here and read the file + <file:Documentation/serial/digiepca.txt>. + + To compile this driver as a module, choose M here: the + module will be called epca. + +config RISCOM8 + tristate "SDL RISCom/8 card support" + depends on SERIAL_NONSTANDARD + help + This is a driver for the SDL Communications RISCom/8 multiport card, + which gives you many serial ports. You would need something like + this to connect more than two modems to your Linux box, for instance + in order to become a dial-in server. If you have a card like that, + say Y here and read the file <file:Documentation/serial/riscom8.txt>. + + Also it's possible to say M here and compile this driver as kernel + loadable module; the module will be called riscom8. + +config SPECIALIX + tristate "Specialix IO8+ card support" + depends on SERIAL_NONSTANDARD + help + This is a driver for the Specialix IO8+ multiport card (both the + ISA and the PCI version) which gives you many serial ports. You + would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + If you have a card like that, say Y here and read the file + <file:Documentation/serial/specialix.txt>. Also it's possible to say + M here and compile this driver as kernel loadable module which will be + called specialix. + +config COMPUTONE + tristate "Computone IntelliPort Plus serial support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + ---help--- + This driver supports the entire family of Intelliport II/Plus + controllers with the exception of the MicroChannel controllers and + products previous to the Intelliport II. These are multiport cards, + which give you many serial ports. You would need something like this + to connect more than two modems to your Linux box, for instance in + order to become a dial-in server. If you have a card like that, say + Y here and read <file:Documentation/serial/computone.txt>. + + To compile this driver as module, choose M here: the + module will be called ip2. + +config SERIAL167 + bool "CD2401 support for MVME166/7 serial ports" + depends on MVME16x + help + This is the driver for the serial ports on the Motorola MVME166, + 167, and 172 boards. Everyone using one of these boards should say + Y here. + diff --git a/drivers/staging/tty/Makefile b/drivers/staging/tty/Makefile new file mode 100644 index 000000000000..ac57c105611b --- /dev/null +++ b/drivers/staging/tty/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_STALLION) += stallion.o +obj-$(CONFIG_ISTALLION) += istallion.o +obj-$(CONFIG_DIGIEPCA) += epca.o +obj-$(CONFIG_SERIAL167) += serial167.o +obj-$(CONFIG_SPECIALIX) += specialix.o +obj-$(CONFIG_RISCOM8) += riscom8.o +obj-$(CONFIG_COMPUTONE) += ip2/ diff --git a/drivers/staging/tty/TODO b/drivers/staging/tty/TODO new file mode 100644 index 000000000000..88756453ac6c --- /dev/null +++ b/drivers/staging/tty/TODO @@ -0,0 +1,6 @@ +These are a few tty/serial drivers that either do not build, +or work if they do build, or if they seem to work, are for obsolete +hardware, or are full of unfixable races and no one uses them anymore. + +If no one steps up to adopt any of these drivers, they will be removed +in the 2.6.41 release. diff --git a/drivers/char/cd1865.h b/drivers/staging/tty/cd1865.h index 9940966e7a1d..9940966e7a1d 100644 --- a/drivers/char/cd1865.h +++ b/drivers/staging/tty/cd1865.h diff --git a/drivers/char/digi1.h b/drivers/staging/tty/digi1.h index 94d4eab5d3ca..94d4eab5d3ca 100644 --- a/drivers/char/digi1.h +++ b/drivers/staging/tty/digi1.h diff --git a/drivers/char/digiFep1.h b/drivers/staging/tty/digiFep1.h index 3c1f1922c798..3c1f1922c798 100644 --- a/drivers/char/digiFep1.h +++ b/drivers/staging/tty/digiFep1.h diff --git a/drivers/char/digiPCI.h b/drivers/staging/tty/digiPCI.h index 6ca7819e5069..6ca7819e5069 100644 --- a/drivers/char/digiPCI.h +++ b/drivers/staging/tty/digiPCI.h diff --git a/drivers/char/epca.c b/drivers/staging/tty/epca.c index d9df46aa0fba..7ad3638967ae 100644 --- a/drivers/char/epca.c +++ b/drivers/staging/tty/epca.c @@ -175,9 +175,9 @@ static unsigned termios2digi_i(struct channel *ch, unsigned); static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); static void receive_data(struct channel *, struct tty_struct *tty); -static int pc_ioctl(struct tty_struct *, struct file *, +static int pc_ioctl(struct tty_struct *, unsigned int, unsigned long); -static int info_ioctl(struct tty_struct *, struct file *, +static int info_ioctl(struct tty_struct *, unsigned int, unsigned long); static void pc_set_termios(struct tty_struct *, struct ktermios *); static void do_softint(struct work_struct *work); @@ -1919,7 +1919,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty) tty_schedule_flip(tty); } -static int info_ioctl(struct tty_struct *tty, struct file *file, +static int info_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { @@ -1982,7 +1982,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, return 0; } -static int pc_tiocmget(struct tty_struct *tty, struct file *file) +static int pc_tiocmget(struct tty_struct *tty) { struct channel *ch = tty->driver_data; struct board_chan __iomem *bc; @@ -2015,7 +2015,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file) return mflag; } -static int pc_tiocmset(struct tty_struct *tty, struct file *file, +static int pc_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct channel *ch = tty->driver_data; @@ -2057,7 +2057,7 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int pc_ioctl(struct tty_struct *tty, struct file *file, +static int pc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { digiflow_t dflow; @@ -2074,14 +2074,14 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, return -EINVAL; switch (cmd) { case TIOCMODG: - mflag = pc_tiocmget(tty, file); + mflag = pc_tiocmget(tty); if (put_user(mflag, (unsigned long __user *)argp)) return -EFAULT; break; case TIOCMODS: if (get_user(mstat, (unsigned __user *)argp)) return -EFAULT; - return pc_tiocmset(tty, file, mstat, ~mstat); + return pc_tiocmset(tty, mstat, ~mstat); case TIOCSDTR: spin_lock_irqsave(&epca_lock, flags); ch->omodem |= ch->m_dtr; diff --git a/drivers/char/epca.h b/drivers/staging/tty/epca.h index d414bf2dbf7c..d414bf2dbf7c 100644 --- a/drivers/char/epca.h +++ b/drivers/staging/tty/epca.h diff --git a/drivers/char/epcaconfig.h b/drivers/staging/tty/epcaconfig.h index 55dec067078e..55dec067078e 100644 --- a/drivers/char/epcaconfig.h +++ b/drivers/staging/tty/epcaconfig.h diff --git a/drivers/char/ip2/Makefile b/drivers/staging/tty/ip2/Makefile index 7b78e0dfc5b0..7b78e0dfc5b0 100644 --- a/drivers/char/ip2/Makefile +++ b/drivers/staging/tty/ip2/Makefile diff --git a/drivers/char/ip2/i2cmd.c b/drivers/staging/tty/ip2/i2cmd.c index e7af647800b6..e7af647800b6 100644 --- a/drivers/char/ip2/i2cmd.c +++ b/drivers/staging/tty/ip2/i2cmd.c diff --git a/drivers/char/ip2/i2cmd.h b/drivers/staging/tty/ip2/i2cmd.h index 29277ec6b8ed..29277ec6b8ed 100644 --- a/drivers/char/ip2/i2cmd.h +++ b/drivers/staging/tty/ip2/i2cmd.h diff --git a/drivers/char/ip2/i2ellis.c b/drivers/staging/tty/ip2/i2ellis.c index 29db44de399f..29db44de399f 100644 --- a/drivers/char/ip2/i2ellis.c +++ b/drivers/staging/tty/ip2/i2ellis.c diff --git a/drivers/char/ip2/i2ellis.h b/drivers/staging/tty/ip2/i2ellis.h index fb6df2456018..fb6df2456018 100644 --- a/drivers/char/ip2/i2ellis.h +++ b/drivers/staging/tty/ip2/i2ellis.h diff --git a/drivers/char/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h index c0ba6c05f0cd..c0ba6c05f0cd 100644 --- a/drivers/char/ip2/i2hw.h +++ b/drivers/staging/tty/ip2/i2hw.h diff --git a/drivers/char/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c index 0d10b89218ed..0d10b89218ed 100644 --- a/drivers/char/ip2/i2lib.c +++ b/drivers/staging/tty/ip2/i2lib.c diff --git a/drivers/char/ip2/i2lib.h b/drivers/staging/tty/ip2/i2lib.h index e559e9bac06d..e559e9bac06d 100644 --- a/drivers/char/ip2/i2lib.h +++ b/drivers/staging/tty/ip2/i2lib.h diff --git a/drivers/char/ip2/i2pack.h b/drivers/staging/tty/ip2/i2pack.h index 00342a677c90..00342a677c90 100644 --- a/drivers/char/ip2/i2pack.h +++ b/drivers/staging/tty/ip2/i2pack.h diff --git a/drivers/char/ip2/ip2.h b/drivers/staging/tty/ip2/ip2.h index 936ccc533949..936ccc533949 100644 --- a/drivers/char/ip2/ip2.h +++ b/drivers/staging/tty/ip2/ip2.h diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/staging/tty/ip2/ip2ioctl.h index aa0a9da85e05..aa0a9da85e05 100644 --- a/drivers/char/ip2/ip2ioctl.h +++ b/drivers/staging/tty/ip2/ip2ioctl.h diff --git a/drivers/char/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c index c3a025356b8b..ea7a8fb08283 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/staging/tty/ip2/ip2main.c @@ -173,7 +173,7 @@ static void ip2_flush_chars(PTTY); static int ip2_write_room(PTTY); static int ip2_chars_in_buf(PTTY); static void ip2_flush_buffer(PTTY); -static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); +static int ip2_ioctl(PTTY, UINT, ULONG); static void ip2_set_termios(PTTY, struct ktermios *); static void ip2_set_line_discipline(PTTY); static void ip2_throttle(PTTY); @@ -181,8 +181,8 @@ static void ip2_unthrottle(PTTY); static void ip2_stop(PTTY); static void ip2_start(PTTY); static void ip2_hangup(PTTY); -static int ip2_tiocmget(struct tty_struct *tty, struct file *file); -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, +static int ip2_tiocmget(struct tty_struct *tty); +static int ip2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int ip2_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -2038,7 +2038,7 @@ ip2_stop ( PTTY tty ) /* Device Ioctl Section */ /******************************************************************************/ -static int ip2_tiocmget(struct tty_struct *tty, struct file *file) +static int ip2_tiocmget(struct tty_struct *tty) { i2ChanStrPtr pCh = DevTable[tty->index]; #ifdef ENABLE_DSSNOW @@ -2085,7 +2085,7 @@ static int ip2_tiocmget(struct tty_struct *tty, struct file *file) | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); } -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, +static int ip2_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { i2ChanStrPtr pCh = DevTable[tty->index]; @@ -2127,7 +2127,7 @@ static int ip2_tiocmset(struct tty_struct *tty, struct file *file, /* */ /******************************************************************************/ static int -ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) +ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg ) { wait_queue_t wait; i2ChanStrPtr pCh = DevTable[tty->index]; diff --git a/drivers/char/ip2/ip2trace.h b/drivers/staging/tty/ip2/ip2trace.h index da20435dc8a6..da20435dc8a6 100644 --- a/drivers/char/ip2/ip2trace.h +++ b/drivers/staging/tty/ip2/ip2trace.h diff --git a/drivers/char/ip2/ip2types.h b/drivers/staging/tty/ip2/ip2types.h index 9d67b260b2f6..9d67b260b2f6 100644 --- a/drivers/char/ip2/ip2types.h +++ b/drivers/staging/tty/ip2/ip2types.h diff --git a/drivers/char/istallion.c b/drivers/staging/tty/istallion.c index 7c6de4c92458..0b266272cccd 100644 --- a/drivers/char/istallion.c +++ b/drivers/staging/tty/istallion.c @@ -603,7 +603,7 @@ static int stli_putchar(struct tty_struct *tty, unsigned char ch); static void stli_flushchars(struct tty_struct *tty); static int stli_writeroom(struct tty_struct *tty); static int stli_charsinbuffer(struct tty_struct *tty); -static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void stli_settermios(struct tty_struct *tty, struct ktermios *old); static void stli_throttle(struct tty_struct *tty); static void stli_unthrottle(struct tty_struct *tty); @@ -1501,7 +1501,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s /*****************************************************************************/ -static int stli_tiocmget(struct tty_struct *tty, struct file *file) +static int stli_tiocmget(struct tty_struct *tty) { struct stliport *portp = tty->driver_data; struct stlibrd *brdp; @@ -1524,7 +1524,7 @@ static int stli_tiocmget(struct tty_struct *tty, struct file *file) return stli_mktiocm(portp->asig.sigvalue); } -static int stli_tiocmset(struct tty_struct *tty, struct file *file, +static int stli_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct stliport *portp = tty->driver_data; @@ -1556,7 +1556,7 @@ static int stli_tiocmset(struct tty_struct *tty, struct file *file, sizeof(asysigs_t), 0); } -static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct stliport *portp; struct stlibrd *brdp; diff --git a/drivers/char/riscom8.c b/drivers/staging/tty/riscom8.c index af4de1fe8445..602643a40b4b 100644 --- a/drivers/char/riscom8.c +++ b/drivers/staging/tty/riscom8.c @@ -1086,7 +1086,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty) return port->xmit_cnt; } -static int rc_tiocmget(struct tty_struct *tty, struct file *file) +static int rc_tiocmget(struct tty_struct *tty) { struct riscom_port *port = tty->driver_data; struct riscom_board *bp; @@ -1115,8 +1115,8 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int rc_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rc_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct riscom_port *port = tty->driver_data; unsigned long flags; @@ -1236,7 +1236,7 @@ static int rc_get_serial_info(struct riscom_port *port, return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0; } -static int rc_ioctl(struct tty_struct *tty, struct file *filp, +static int rc_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct riscom_port *port = tty->driver_data; diff --git a/drivers/char/riscom8.h b/drivers/staging/tty/riscom8.h index c9876b3f9714..c9876b3f9714 100644 --- a/drivers/char/riscom8.h +++ b/drivers/staging/tty/riscom8.h diff --git a/drivers/char/riscom8_reg.h b/drivers/staging/tty/riscom8_reg.h index a32475ed0d18..a32475ed0d18 100644 --- a/drivers/char/riscom8_reg.h +++ b/drivers/staging/tty/riscom8_reg.h diff --git a/drivers/char/serial167.c b/drivers/staging/tty/serial167.c index 748c3b0ecd89..674af6933978 100644 --- a/drivers/char/serial167.c +++ b/drivers/staging/tty/serial167.c @@ -1308,7 +1308,7 @@ check_and_exit: return startup(info); } /* set_serial_info */ -static int cy_tiocmget(struct tty_struct *tty, struct file *file) +static int cy_tiocmget(struct tty_struct *tty) { struct cyclades_port *info = tty->driver_data; int channel; @@ -1331,8 +1331,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) } /* cy_tiocmget */ static int -cy_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cyclades_port *info = tty->driver_data; int channel; @@ -1493,7 +1492,7 @@ get_default_timeout(struct cyclades_port *info, unsigned long __user * value) } static int -cy_ioctl(struct tty_struct *tty, struct file *file, +cy_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cyclades_port *info = tty->driver_data; diff --git a/drivers/char/specialix.c b/drivers/staging/tty/specialix.c index c2bca3f25ef3..47e5753f732a 100644 --- a/drivers/char/specialix.c +++ b/drivers/staging/tty/specialix.c @@ -1737,7 +1737,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) return port->xmit_cnt; } -static int sx_tiocmget(struct tty_struct *tty, struct file *file) +static int sx_tiocmget(struct tty_struct *tty) { struct specialix_port *port = tty->driver_data; struct specialix_board *bp; @@ -1778,7 +1778,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) } -static int sx_tiocmset(struct tty_struct *tty, struct file *file, +static int sx_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct specialix_port *port = tty->driver_data; @@ -1928,7 +1928,7 @@ static int sx_get_serial_info(struct specialix_port *port, } -static int sx_ioctl(struct tty_struct *tty, struct file *filp, +static int sx_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct specialix_port *port = tty->driver_data; diff --git a/drivers/char/specialix_io8.h b/drivers/staging/tty/specialix_io8.h index c63005274d9b..c63005274d9b 100644 --- a/drivers/char/specialix_io8.h +++ b/drivers/staging/tty/specialix_io8.h diff --git a/drivers/char/stallion.c b/drivers/staging/tty/stallion.c index 461a5a045517..4fff5cd3b163 100644 --- a/drivers/char/stallion.c +++ b/drivers/staging/tty/stallion.c @@ -1094,7 +1094,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp /*****************************************************************************/ -static int stl_tiocmget(struct tty_struct *tty, struct file *file) +static int stl_tiocmget(struct tty_struct *tty) { struct stlport *portp; @@ -1107,7 +1107,7 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file) return stl_getsignals(portp); } -static int stl_tiocmset(struct tty_struct *tty, struct file *file, +static int stl_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct stlport *portp; @@ -1132,14 +1132,13 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct stlport *portp; int rc; void __user *argp = (void __user *)arg; - pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd, - arg); + pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg); portp = tty->driver_data; if (portp == NULL) diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig new file mode 100644 index 000000000000..3fd7199301b6 --- /dev/null +++ b/drivers/tty/Kconfig @@ -0,0 +1,321 @@ +config VT + bool "Virtual terminal" if EXPERT + depends on !S390 + select INPUT + default y + ---help--- + If you say Y here, you will get support for terminal devices with + display and keyboard devices. These are called "virtual" because you + can run several virtual terminals (also called virtual consoles) on + one physical terminal. This is rather useful, for example one + virtual terminal can collect system messages and warnings, another + one can be used for a text-mode user session, and a third could run + an X session, all in parallel. Switching between virtual terminals + is done with certain key combinations, usually Alt-<function key>. + + The setterm command ("man setterm") can be used to change the + properties (such as colors or beeping) of a virtual terminal. The + man page console_codes(4) ("man console_codes") contains the special + character sequences that can be used to change those properties + directly. The fonts used on virtual terminals can be changed with + the setfont ("man setfont") command and the key bindings are defined + with the loadkeys ("man loadkeys") command. + + You need at least one virtual terminal device in order to make use + of your keyboard and monitor. Therefore, only people configuring an + embedded system would want to say N here in order to save some + memory; the only way to log into such a system is then via a serial + or network connection. + + If unsure, say Y, or else you won't be able to do much with your new + shiny Linux system :-) + +config CONSOLE_TRANSLATIONS + depends on VT + default y + bool "Enable character translations in console" if EXPERT + ---help--- + This enables support for font mapping and Unicode translation + on virtual consoles. + +config VT_CONSOLE + bool "Support for console on virtual terminal" if EXPERT + depends on VT + default y + ---help--- + The system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode. If you + answer Y here, a virtual terminal (the device used to interact with + a physical terminal) can be used as system console. This is the most + common mode of operations, so you should say Y here unless you want + the kernel messages be output only to a serial port (in which case + you should say Y to "Console on serial port", below). + + If you do say Y here, by default the currently visible virtual + terminal (/dev/tty0) will be used as system console. You can change + that with a kernel command line option such as "console=tty3" which + would use the third virtual terminal as system console. (Try "man + bootparam" or see the documentation of your boot loader (lilo or + loadlin) about how to pass options to the kernel at boot time.) + + If unsure, say Y. + +config HW_CONSOLE + bool + depends on VT && !S390 && !UML + default y + +config VT_HW_CONSOLE_BINDING + bool "Support for binding and unbinding console drivers" + depends on HW_CONSOLE + default n + ---help--- + The virtual terminal is the device that interacts with the physical + terminal through console drivers. On these systems, at least one + console driver is loaded. In other configurations, additional console + drivers may be enabled, such as the framebuffer console. If more than + 1 console driver is enabled, setting this to 'y' will allow you to + select the console driver that will serve as the backend for the + virtual terminals. + + See <file:Documentation/console/console.txt> for more + information. For framebuffer console users, please refer to + <file:Documentation/fb/fbcon.txt>. + +config UNIX98_PTYS + bool "Unix98 PTY support" if EXPERT + default y + ---help--- + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx for + masters and /dev/ttyxx for slaves of pseudo terminals. This scheme + has a number of problems. The GNU C library glibc 2.1 and later, + however, supports the Unix98 naming standard: in order to acquire a + pseudo terminal, a process opens /dev/ptmx; the number of the pseudo + terminal is then made available to the process and the pseudo + terminal slave can be accessed as /dev/pts/<number>. What was + traditionally /dev/ttyp2 will then be /dev/pts/2, for example. + + All modern Linux systems use the Unix98 ptys. Say Y unless + you're on an embedded system and want to conserve memory. + +config DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + depends on UNIX98_PTYS + default n + ---help--- + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + +config LEGACY_PTYS + bool "Legacy (BSD) PTY support" + default y + ---help--- + A pseudo terminal (PTY) is a software device consisting of two + halves: a master and a slave. The slave device behaves identical to + a physical terminal; the master device is used by a process to + read data from and write data to the slave, thereby emulating a + terminal. Typical programs for the master side are telnet servers + and xterms. + + Linux has traditionally used the BSD-like names /dev/ptyxx + for masters and /dev/ttyxx for slaves of pseudo + terminals. This scheme has a number of problems, including + security. This option enables these legacy devices; on most + systems, it is safe to say N. + + +config LEGACY_PTY_COUNT + int "Maximum number of legacy PTY in use" + depends on LEGACY_PTYS + range 0 256 + default "256" + ---help--- + The maximum number of legacy PTYs that can be used at any one time. + The default is 256, and should be more than enough. Embedded + systems may want to reduce this to save memory. + + When not in use, each legacy PTY occupies 12 bytes on 32-bit + architectures and 24 bytes on 64-bit architectures. + +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + +config SERIAL_NONSTANDARD + bool "Non-standard serial port support" + depends on HAS_IOMEM + ---help--- + Say Y here if you have any non-standard serial boards -- boards + which aren't supported using the standard "dumb" serial driver. + This includes intelligent serial boards such as Cyclades, + Digiboards, etc. These are usually used for systems that need many + serial ports because they serve many terminals or dial-in + connections. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about non-standard serial boards. + + Most people can say N here. + +config ROCKETPORT + tristate "Comtrol RocketPort support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + help + This driver supports Comtrol RocketPort and RocketModem PCI boards. + These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or + modems. For information about the RocketPort/RocketModem boards + and this driver read <file:Documentation/serial/rocket.txt>. + + To compile this driver as a module, choose M here: the + module will be called rocket. + + If you want to compile this driver into the kernel, say Y here. If + you don't have a Comtrol RocketPort/RocketModem card installed, say N. + +config CYCLADES + tristate "Cyclades async mux support" + depends on SERIAL_NONSTANDARD && (PCI || ISA) + select FW_LOADER + ---help--- + This driver supports Cyclades Z and Y multiserial boards. + You would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + For information about the Cyclades-Z card, read + <file:Documentation/serial/README.cycladesZ>. + + To compile this driver as a module, choose M here: the + module will be called cyclades. + + If you haven't heard about it, it's safe to say N. + +config CYZ_INTR + bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" + depends on EXPERIMENTAL && CYCLADES + help + The Cyclades-Z family of multiport cards allows 2 (two) driver op + modes: polling and interrupt. In polling mode, the driver will check + the status of the Cyclades-Z ports every certain amount of time + (which is called polling cycle and is configurable). In interrupt + mode, it will use an interrupt line (IRQ) in order to check the + status of the Cyclades-Z ports. The default op mode is polling. If + unsure, say N. + +config MOXA_INTELLIO + tristate "Moxa Intellio support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + select FW_LOADER + help + Say Y here if you have a Moxa Intellio multiport serial card. + + To compile this driver as a module, choose M here: the + module will be called moxa. + +config MOXA_SMARTIO + tristate "Moxa SmartIO support v. 2.0" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + help + Say Y here if you have a Moxa SmartIO multiport serial card and/or + want to help develop a new version of this driver. + + This is upgraded (1.9.1) driver from original Moxa drivers with + changes finally resulting in PCI probing. + + This driver can also be built as a module. The module will be called + mxser. If you want to do that, say M here. + +config SYNCLINK + tristate "Microgate SyncLink card support" + depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API + help + Provides support for the SyncLink ISA and PCI multiprotocol serial + adapters. These adapters support asynchronous and HDLC bit + synchronous communication up to 10Mbps (PCI adapter). + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclink. If you want to do that, say M + here. + +config SYNCLINKMP + tristate "SyncLink Multiport support" + depends on SERIAL_NONSTANDARD && PCI + help + Enable support for the SyncLink Multiport (2 or 4 ports) + serial adapter, running asynchronous and HDLC communications up + to 2.048Mbps. Each ports is independently selectable for + RS-232, V.35, RS-449, RS-530, and X.21 + + This driver may be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclinkmp. If you want to do that, say M + here. + +config SYNCLINK_GT + tristate "SyncLink GT/AC support" + depends on SERIAL_NONSTANDARD && PCI + help + Support for SyncLink GT and SyncLink AC families of + synchronous and asynchronous serial adapters + manufactured by Microgate Systems, Ltd. (www.microgate.com) + +config NOZOMI + tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" + depends on PCI && EXPERIMENTAL + help + If you have a HSDPA driver Broadband Wireless Data Card - + Globe Trotter PCMCIA card, say Y here. + + To compile this driver as a module, choose M here, the module + will be called nozomi. + +config ISI + tristate "Multi-Tech multiport card support (EXPERIMENTAL)" + depends on SERIAL_NONSTANDARD && PCI + select FW_LOADER + help + This is a driver for the Multi-Tech cards which provide several + serial ports. The driver is experimental and can currently only be + built as a module. The module will be called isicom. + If you want to do that, choose M here. + +config N_HDLC + tristate "HDLC line discipline support" + depends on SERIAL_NONSTANDARD + help + Allows synchronous HDLC communications with tty device drivers that + support synchronous HDLC such as the Microgate SyncLink adapter. + + This driver can be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called n_hdlc. If you want to do that, say M + here. + +config N_GSM + tristate "GSM MUX line discipline support (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on NET + help + This line discipline provides support for the GSM MUX protocol and + presents the mux as a set of 61 individual tty devices. + diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 396277216e4f..690522fcb338 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -11,3 +11,18 @@ obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ obj-y += serial/ + +# tty drivers +obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o +obj-$(CONFIG_CYCLADES) += cyclades.o +obj-$(CONFIG_ISI) += isicom.o +obj-$(CONFIG_MOXA_INTELLIO) += moxa.o +obj-$(CONFIG_MOXA_SMARTIO) += mxser.o +obj-$(CONFIG_NOZOMI) += nozomi.o +obj-$(CONFIG_ROCKETPORT) += rocket.o +obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o +obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o +obj-$(CONFIG_SYNCLINK) += synclink.o + +obj-y += ipwireless/ diff --git a/drivers/char/amiserial.c b/drivers/tty/amiserial.c index 6ee3348bc3e4..f214e5022472 100644 --- a/drivers/char/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value) } -static int rs_tiocmget(struct tty_struct *tty, struct file *file) +static int rs_tiocmget(struct tty_struct *tty) { struct async_struct * info = tty->driver_data; unsigned char control, status; @@ -1216,8 +1216,8 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) | (!(status & SER_CTS) ? TIOCM_CTS : 0); } -static int rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rs_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear) { struct async_struct * info = tty->driver_data; unsigned long flags; @@ -1293,7 +1293,7 @@ static int rs_get_icount(struct tty_struct *tty, return 0; } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct async_struct * info = tty->driver_data; diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c index 16402445f2b2..16402445f2b2 100644 --- a/drivers/char/bfin_jtag_comm.c +++ b/drivers/tty/bfin_jtag_comm.c diff --git a/drivers/char/cyclades.c b/drivers/tty/cyclades.c index 4f152c28f40e..c99728f0cd9f 100644 --- a/drivers/char/cyclades.c +++ b/drivers/tty/cyclades.c @@ -2429,7 +2429,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) return put_user(result, (unsigned long __user *)value); } -static int cy_tiocmget(struct tty_struct *tty, struct file *file) +static int cy_tiocmget(struct tty_struct *tty) { struct cyclades_port *info = tty->driver_data; struct cyclades_card *card; @@ -2483,7 +2483,7 @@ end: } /* cy_tiomget */ static int -cy_tiocmset(struct tty_struct *tty, struct file *file, +cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct cyclades_port *info = tty->driver_data; @@ -2680,7 +2680,7 @@ static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg, * not recognized by the driver, it should return ENOIOCTLCMD. */ static int -cy_ioctl(struct tty_struct *tty, struct file *file, +cy_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct cyclades_port *info = tty->driver_data; diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig new file mode 100644 index 000000000000..6f2c9809f1fb --- /dev/null +++ b/drivers/tty/hvc/Kconfig @@ -0,0 +1,105 @@ +config HVC_DRIVER + bool + help + Generic "hypervisor virtual console" infrastructure for various + hypervisors (pSeries, iSeries, Xen, lguest). + It will automatically be selected if one of the back-end console drivers + is selected. + +config HVC_IRQ + bool + +config HVC_CONSOLE + bool "pSeries Hypervisor Virtual Console support" + depends on PPC_PSERIES + select HVC_DRIVER + select HVC_IRQ + help + pSeries machines when partitioned support a hypervisor virtual + console. This driver allows each pSeries partition to have a console + which is accessed via the HMC. + +config HVC_ISERIES + bool "iSeries Hypervisor Virtual Console support" + depends on PPC_ISERIES + default y + select HVC_DRIVER + select HVC_IRQ + select VIOPATH + help + iSeries machines support a hypervisor virtual console. + +config HVC_RTAS + bool "IBM RTAS Console support" + depends on PPC_RTAS + select HVC_DRIVER + help + IBM Console device driver which makes use of RTAS + +config HVC_BEAT + bool "Toshiba's Beat Hypervisor Console support" + depends on PPC_CELLEB + select HVC_DRIVER + help + Toshiba's Cell Reference Set Beat Console device driver + +config HVC_IUCV + bool "z/VM IUCV Hypervisor console support (VM only)" + depends on S390 + select HVC_DRIVER + select IUCV + default y + help + This driver provides a Hypervisor console (HVC) back-end to access + a Linux (console) terminal via a z/VM IUCV communication path. + +config HVC_XEN + bool "Xen Hypervisor Console support" + depends on XEN + select HVC_DRIVER + select HVC_IRQ + default y + help + Xen virtual console device driver + +config HVC_UDBG + bool "udbg based fake hypervisor console" + depends on PPC && EXPERIMENTAL + select HVC_DRIVER + default n + +config HVC_DCC + bool "ARM JTAG DCC console" + depends on ARM + select HVC_DRIVER + help + This console uses the JTAG DCC on ARM to create a console under the HVC + driver. This console is used through a JTAG only on ARM. If you don't have + a JTAG then you probably don't want this option. + +config HVC_BFIN_JTAG + bool "Blackfin JTAG console" + depends on BLACKFIN + select HVC_DRIVER + help + This console uses the Blackfin JTAG to create a console under the + the HVC driver. If you don't have JTAG, then you probably don't + want this option. + +config HVCS + tristate "IBM Hypervisor Virtual Console Server support" + depends on PPC_PSERIES && HVC_CONSOLE + help + Partitionable IBM Power5 ppc64 machines allow hosting of + firmware virtual consoles from one Linux partition by + another Linux partition. This driver allows console data + from Linux partitions to be accessed through TTY device + interfaces in the device tree of a Linux partition running + this driver. + + To compile this driver as a module, choose M here: the + module will be called hvcs. Additionally, this module + will depend on arch specific APIs exported from hvcserver.ko + which will also be compiled when this driver is built as a + module. + diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index d79e7e9bf9d2..40a25d93fe52 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o +obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o obj-$(CONFIG_HVCS) += hvcs.o diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c new file mode 100644 index 000000000000..31d6cc6a77af --- /dev/null +++ b/drivers/tty/hvc/hvc_bfin_jtag.c @@ -0,0 +1,105 @@ +/* + * Console via Blackfin JTAG Communication + * + * Copyright 2008-2011 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/types.h> + +#include "hvc_console.h" + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +/* Helper functions to glue the register API to simple C operations */ +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +/* Send data to the host */ +static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count) +{ + static uint32_t outbound_len; + uint32_t emudat; + int ret; + + if (bfin_read_DBGSTAT() & EMUDOF) + return 0; + + if (!outbound_len) { + outbound_len = count; + bfin_write_emudat(outbound_len); + return 0; + } + + ret = min(outbound_len, (uint32_t)4); + memcpy(&emudat, buf, ret); + bfin_write_emudat(emudat); + outbound_len -= ret; + + return ret; +} + +/* Receive data from the host */ +static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count) +{ + static uint32_t inbound_len; + uint32_t emudat; + int ret; + + if (!(bfin_read_DBGSTAT() & EMUDIF)) + return 0; + emudat = bfin_read_emudat(); + + if (!inbound_len) { + inbound_len = emudat; + return 0; + } + + ret = min(inbound_len, (uint32_t)4); + memcpy(buf, &emudat, ret); + inbound_len -= ret; + + return ret; +} + +/* Glue the HVC layers to the Blackfin layers */ +static const struct hv_ops hvc_bfin_get_put_ops = { + .get_chars = hvc_bfin_get_chars, + .put_chars = hvc_bfin_put_chars, +}; + +static int __init hvc_bfin_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_bfin_get_put_ops); + return 0; +} +console_initcall(hvc_bfin_console_init); + +static int __init hvc_bfin_init(void) +{ + hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128); + return 0; +} +device_initcall(hvc_bfin_init); diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 6470f63deb4b..435f6facbc23 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -33,54 +33,29 @@ static inline u32 __dcc_getstatus(void) { u32 __ret; - - asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" : "=r" (__ret) : : "cc"); return __ret; } -#if defined(CONFIG_CPU_V7) static inline char __dcc_getchar(void) { char __c; - asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bne get_wait \n\ - mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" - : "=r" (__c) : : "cc"); - - return __c; -} -#else -static inline char __dcc_getchar(void) -{ - char __c; - - asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" : "=r" (__c)); return __c; } -#endif -#if defined(CONFIG_CPU_V7) -static inline void __dcc_putchar(char c) -{ - asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bcs put_wait \n\ - mcr p14, 0, %0, c0, c5, 0 " - : : "r" (c) : "cc"); -} -#else static inline void __dcc_putchar(char c) { - asm("mcr p14, 0, %0, c0, c5, 0 @ write a char" + asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" : /* no output register */ : "r" (c)); } -#endif static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) { @@ -90,7 +65,7 @@ static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) while (__dcc_getstatus() & DCC_STATUS_TX) cpu_relax(); - __dcc_putchar((char)(buf[i] & 0xFF)); + __dcc_putchar(buf[i]); } return count; @@ -100,15 +75,11 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) { int i; - for (i = 0; i < count; ++i) { - int c = -1; - + for (i = 0; i < count; ++i) if (__dcc_getstatus() & DCC_STATUS_RX) - c = __dcc_getchar(); - if (c < 0) + buf[i] = __dcc_getchar(); + else break; - buf[i] = c; - } return i; } diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index 67a75a502c01..8a8d6373f164 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -1095,7 +1095,7 @@ static void hvsi_unthrottle(struct tty_struct *tty) h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); } -static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) +static int hvsi_tiocmget(struct tty_struct *tty) { struct hvsi_struct *hp = tty->driver_data; @@ -1103,8 +1103,8 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) return hp->mctrl; } -static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int hvsi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct hvsi_struct *hp = tty->driver_data; unsigned long flags; diff --git a/drivers/char/pcmcia/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile index db80873d7f20..db80873d7f20 100644 --- a/drivers/char/pcmcia/ipwireless/Makefile +++ b/drivers/tty/ipwireless/Makefile diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c index 0aeb5a38d296..0aeb5a38d296 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ b/drivers/tty/ipwireless/hardware.c diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h index 90a8590e43b0..90a8590e43b0 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.h +++ b/drivers/tty/ipwireless/hardware.h diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/tty/ipwireless/main.c index 444155a305ae..444155a305ae 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/tty/ipwireless/main.c diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/tty/ipwireless/main.h index f2cbb116bccb..f2cbb116bccb 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/tty/ipwireless/main.h diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/tty/ipwireless/network.c index f7daeea598e4..f7daeea598e4 100644 --- a/drivers/char/pcmcia/ipwireless/network.c +++ b/drivers/tty/ipwireless/network.c diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/tty/ipwireless/network.h index 561f765b3334..561f765b3334 100644 --- a/drivers/char/pcmcia/ipwireless/network.h +++ b/drivers/tty/ipwireless/network.h diff --git a/drivers/char/pcmcia/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h index 9d6bcc77c73c..9d6bcc77c73c 100644 --- a/drivers/char/pcmcia/ipwireless/setup_protocol.h +++ b/drivers/tty/ipwireless/setup_protocol.h diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index f5eb28b6cb0f..ef92869502a7 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -395,7 +395,7 @@ static int set_control_lines(struct ipw_tty *tty, unsigned int set, return 0; } -static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file) +static int ipw_tiocmget(struct tty_struct *linux_tty) { struct ipw_tty *tty = linux_tty->driver_data; /* FIXME: Exactly how is the tty object locked here .. */ @@ -410,7 +410,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file) } static int -ipw_tiocmset(struct tty_struct *linux_tty, struct file *file, +ipw_tiocmset(struct tty_struct *linux_tty, unsigned int set, unsigned int clear) { struct ipw_tty *tty = linux_tty->driver_data; @@ -425,7 +425,7 @@ ipw_tiocmset(struct tty_struct *linux_tty, struct file *file, return set_control_lines(tty, set, clear); } -static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file, +static int ipw_ioctl(struct tty_struct *linux_tty, unsigned int cmd, unsigned long arg) { struct ipw_tty *tty = linux_tty->driver_data; @@ -484,7 +484,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file, return tty_perform_flush(linux_tty, arg); } } - return tty_mode_ioctl(linux_tty, file, cmd , arg); + return -ENOIOCTLCMD; } static int add_tty(int j, diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h index 747b2d637860..747b2d637860 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/tty/ipwireless/tty.h diff --git a/drivers/char/isicom.c b/drivers/tty/isicom.c index c27e9d21fea9..db1cf9c328d8 100644 --- a/drivers/char/isicom.c +++ b/drivers/tty/isicom.c @@ -1065,7 +1065,7 @@ static int isicom_send_break(struct tty_struct *tty, int length) return 0; } -static int isicom_tiocmget(struct tty_struct *tty, struct file *file) +static int isicom_tiocmget(struct tty_struct *tty) { struct isi_port *port = tty->driver_data; /* just send the port status */ @@ -1082,8 +1082,8 @@ static int isicom_tiocmget(struct tty_struct *tty, struct file *file) ((status & ISI_RI ) ? TIOCM_RI : 0); } -static int isicom_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int isicom_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct isi_port *port = tty->driver_data; unsigned long flags; @@ -1167,7 +1167,7 @@ static int isicom_get_serial_info(struct isi_port *port, return 0; } -static int isicom_ioctl(struct tty_struct *tty, struct file *filp, +static int isicom_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct isi_port *port = tty->driver_data; diff --git a/drivers/char/moxa.c b/drivers/tty/moxa.c index 107b0bd58d19..35b0c38590e6 100644 --- a/drivers/char/moxa.c +++ b/drivers/tty/moxa.c @@ -199,8 +199,8 @@ static void moxa_set_termios(struct tty_struct *, struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); static void moxa_hangup(struct tty_struct *); -static int moxa_tiocmget(struct tty_struct *tty, struct file *file); -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, +static int moxa_tiocmget(struct tty_struct *tty); +static int moxa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); @@ -287,7 +287,7 @@ static void moxa_low_water_check(void __iomem *ofsAddr) * TTY operations */ -static int moxa_ioctl(struct tty_struct *tty, struct file *file, +static int moxa_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct moxa_port *ch = tty->driver_data; @@ -1257,7 +1257,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) return chars; } -static int moxa_tiocmget(struct tty_struct *tty, struct file *file) +static int moxa_tiocmget(struct tty_struct *tty) { struct moxa_port *ch = tty->driver_data; int flag = 0, dtr, rts; @@ -1277,7 +1277,7 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file) return flag; } -static int moxa_tiocmset(struct tty_struct *tty, struct file *file, +static int moxa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct moxa_port *ch; diff --git a/drivers/char/moxa.h b/drivers/tty/moxa.h index 87d16ce57be7..87d16ce57be7 100644 --- a/drivers/char/moxa.h +++ b/drivers/tty/moxa.h diff --git a/drivers/char/mxser.c b/drivers/tty/mxser.c index dd9d75351cd6..d188f378684d 100644 --- a/drivers/char/mxser.c +++ b/drivers/tty/mxser.c @@ -1320,7 +1320,7 @@ static int mxser_get_lsr_info(struct mxser_port *info, return put_user(result, value); } -static int mxser_tiocmget(struct tty_struct *tty, struct file *file) +static int mxser_tiocmget(struct tty_struct *tty) { struct mxser_port *info = tty->driver_data; unsigned char control, status; @@ -1347,7 +1347,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file) ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); } -static int mxser_tiocmset(struct tty_struct *tty, struct file *file, +static int mxser_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct mxser_port *info = tty->driver_data; @@ -1655,7 +1655,7 @@ static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, return ret; } -static int mxser_ioctl(struct tty_struct *tty, struct file *file, +static int mxser_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct mxser_port *info = tty->driver_data; diff --git a/drivers/char/mxser.h b/drivers/tty/mxser.h index 41878a69203d..41878a69203d 100644 --- a/drivers/char/mxser.h +++ b/drivers/tty/mxser.h diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index aa2e5d3eb01a..176f63256b37 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1250,8 +1250,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl) { - struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, - gsm->ftype|PF); + struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype); if (msg == NULL) return; msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */ @@ -2649,13 +2648,13 @@ static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout) to do here */ } -static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp) +static int gsmtty_tiocmget(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; return dlci->modem_rx; } -static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp, +static int gsmtty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct gsm_dlci *dlci = tty->driver_data; @@ -2672,7 +2671,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp, } -static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp, +static int gsmtty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { return -ENOIOCTLCMD; diff --git a/drivers/char/nozomi.c b/drivers/tty/nozomi.c index 294d03e8c61a..f4f11164efe5 100644 --- a/drivers/char/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1514,8 +1514,6 @@ static void __devexit tty_exit(struct nozomi *dc) DBG1(" "); - flush_scheduled_work(); - for (i = 0; i < MAX_PORT; ++i) { struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); if (tty && list_empty(&tty->hangup_work.entry)) @@ -1750,7 +1748,7 @@ static int ntty_write_room(struct tty_struct *tty) } /* Gets io control parameters */ -static int ntty_tiocmget(struct tty_struct *tty, struct file *file) +static int ntty_tiocmget(struct tty_struct *tty) { const struct port *port = tty->driver_data; const struct ctrl_dl *ctrl_dl = &port->ctrl_dl; @@ -1767,8 +1765,8 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file) } /* Sets io controls parameters */ -static int ntty_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int ntty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct nozomi *dc = get_dc_by_tty(tty); unsigned long flags; @@ -1824,7 +1822,7 @@ static int ntty_tiocgicount(struct tty_struct *tty, return 0; } -static int ntty_ioctl(struct tty_struct *tty, struct file *file, +static int ntty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct port *port = tty->driver_data; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 923a48585501..c88029af84dd 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -334,7 +334,7 @@ free_mem_out: return -ENOMEM; } -static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file, +static int pty_bsd_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { @@ -489,7 +489,7 @@ static struct ctl_table pty_root_table[] = { }; -static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file, +static int pty_unix98_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { diff --git a/drivers/char/rocket.c b/drivers/tty/rocket.c index 3e4e73a0d7c1..3780da8ad12d 100644 --- a/drivers/char/rocket.c +++ b/drivers/tty/rocket.c @@ -1169,7 +1169,7 @@ static int sGetChanRI(CHANNEL_T * ChP) * Returns the state of the serial modem control lines. These next 2 functions * are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs. */ -static int rp_tiocmget(struct tty_struct *tty, struct file *file) +static int rp_tiocmget(struct tty_struct *tty) { struct r_port *info = tty->driver_data; unsigned int control, result, ChanStatus; @@ -1189,8 +1189,8 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file) /* * Sets the modem control lines */ -static int rp_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int rp_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct r_port *info = tty->driver_data; @@ -1326,7 +1326,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver } /* IOCTL call handler into the driver */ -static int rp_ioctl(struct tty_struct *tty, struct file *file, +static int rp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct r_port *info = tty->driver_data; diff --git a/drivers/char/rocket.h b/drivers/tty/rocket.h index ec863f35f1a9..ec863f35f1a9 100644 --- a/drivers/char/rocket.h +++ b/drivers/tty/rocket.h diff --git a/drivers/char/rocket_int.h b/drivers/tty/rocket_int.h index 67e0f1e778a2..67e0f1e778a2 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/tty/rocket_int.h diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index de0160e3f8c4..d5bfd41707e7 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work) #endif } -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); - struct tty_struct *tty; - - tty = info->tty; - if (!tty) - return; - - tty_hangup(tty); -} - - static int startup(struct m68k_serial * info) { m68328_uart *uart = &uart_addr[info->line]; @@ -967,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration) local_irq_restore(flags); } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; @@ -1347,7 +1325,6 @@ rs68328_init(void) info->count = 0; info->blocked_open = 0; INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); info->line = i; diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h index 664ceb0a158c..8c9c3c0745db 100644 --- a/drivers/tty/serial/68328serial.h +++ b/drivers/tty/serial/68328serial.h @@ -159,7 +159,6 @@ struct m68k_serial { int xmit_tail; int xmit_cnt; struct work_struct tqueue; - struct work_struct tqueue_hangup; wait_queue_head_t open_wait; wait_queue_head_t close_wait; }; diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index bc21eeae8fde..0a3e8787ed50 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value) } #endif -static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +static int rs_360_tiocmget(struct tty_struct *tty) { ser_info_t *info = (ser_info_t *)tty->driver_data; unsigned int result = 0; @@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, +static int rs_360_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { #ifdef modem_control @@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty, return 0; } -static int rs_360_ioctl(struct tty_struct *tty, struct file * file, +static int rs_360_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int error; diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 3975df6f7fdb..b3b881bc4712 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up) return 0; } +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status); + } + return 1; +} + /* * We know that the chip has FIFOs. Does it have an EFR? The * EFR is located in the same register position as the IIR and @@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up) quot = serial_dl_read(up); quot <<= 3; - status1 = serial_in(up, 0x04); /* EXCR2 */ - status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status1); - - serial_dl_write(up, quot); + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); serial_outp(up, UART_LCR, 0); @@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line) struct uart_8250_port *up = &serial8250_ports[line]; if (up->capabilities & UART_NATSEMI) { - unsigned char tmp; - /* Ensure it's still in high speed mode */ serial_outp(up, UART_LCR, 0xE0); - tmp = serial_in(up, 0x04); /* EXCR2 */ - tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, tmp); + ns16550a_goto_highspeed(up); serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; } uart_resume_port(&serial8250_reg, &up->port); } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2b8334601c8b..d9ccbf825095 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE depends on SERIAL_MSM=y select SERIAL_CORE_CONSOLE +config SERIAL_MSM_HS + tristate "MSM UART High Speed: Serial Driver" + depends on ARCH_MSM + select SERIAL_CORE + help + If you have a machine based on MSM family of SoCs, you + can enable its onboard high speed serial port by enabling + this option. + + Choose M here to compile it as a module. The module will be + called msm_serial_hs. + config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" depends on ARM && ARCH_VT8500 @@ -1588,12 +1600,25 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES + tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on PCI select SERIAL_CORE - select PCH_DMA help This driver is for PCH(Platform controller Hub) UART of Intel EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. + + This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ + Output Hub) which is for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + +config SERIAL_MSM_SMD + bool "Enable tty device interface for some SMD ports" + default n + depends on MSM_SMD + help + Enables userspace clients to read and write to some streaming SMD + ports via tty device interface for MSM chipset. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 8ea92e9c73b0..d94dc005c8a6 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o @@ -92,3 +93,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o +obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index f9b49b5ff5e1..8f014bb916b7 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) -int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart - *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &altera_jtaguart_ops; - } - - return 0; -} - #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) static void altera_jtaguart_console_putc(struct console *co, const char c) { @@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co, if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) return -EINVAL; port = &altera_jtaguart_ports[co->index].port; - if (port->membase == 0) + if (port->membase == NULL) return -ENODEV; return 0; } @@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) { struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; - int i; + struct resource *res_irq, *res_mem; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; + if (i >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; - uart_add_one_port(&altera_jtaguart_driver, port); - } + port = &altera_jtaguart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp) + port->mapbase = platp->mapbase; + else + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp) + port->irq = platp->irq; + else + return -ENODEV; + + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->iotype = SERIAL_IO_MEM; + port->ops = &altera_jtaguart_ops; + port->flags = UPF_BOOT_AUTOCONF; + + uart_add_one_port(&altera_jtaguart_driver, port); return 0; } @@ -454,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) static int __devexit altera_jtaguart_remove(struct platform_device *pdev) { struct uart_port *port; - int i; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { - port = &altera_jtaguart_ports[i].port; - if (port) - uart_remove_one_port(&altera_jtaguart_driver, port); - } + if (i == -1) + i = 0; + + port = &altera_jtaguart_ports[i].port; + uart_remove_one_port(&altera_jtaguart_driver, port); return 0; } diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 721216292a50..3a573528555e 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -86,16 +86,12 @@ struct altera_uart { static u32 altera_uart_readl(struct uart_port *port, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); + return readl(port->membase + (reg << port->regshift)); } static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); + writel(dat, port->membase + (reg << port->regshift)); } static unsigned int altera_uart_tx_empty(struct uart_port *port) @@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) if (!port->membase) return -ENOMEM; + if (platp) + port->regshift = platp->bus_shift; + else + port->regshift = 0; + port->line = i; port->type = PORT_ALTERA_UART; port->iotype = SERIAL_IO_MEM; port->uartclk = platp->uartclk; port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; uart_add_one_port(&altera_uart_driver, port); @@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port = &altera_uart_ports[pdev->id].port; + struct uart_port *port; + int i = pdev->id; + if (i == -1) + i = 0; + + port = &altera_uart_ports[i].port; uart_remove_one_port(&altera_uart_driver, port); + return 0; } diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 2a1d52fb4936..f119d1761106 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&port->lock, flags); } +static void atmel_set_ldisc(struct uart_port *port, int new) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + atmel_enable_ms(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + } +} + /* * Return string describing the specified port */ @@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = { .shutdown = atmel_shutdown, .flush_buffer = atmel_flush_buffer, .set_termios = atmel_set_termios, + .set_ldisc = atmel_set_ldisc, .type = atmel_type, .release_port = atmel_release_port, .request_port = atmel_request_port, diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index e95c524d9d18..c3ec0a61d859 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev) sport->port.mapbase = res->start; sport->port.irq = platform_get_irq(pdev, 0); - if (sport->port.irq < 0) { + if ((int)sport->port.irq < 0) { dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); ret = -ENOENT; goto out_error_unmap; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index bcc31f2140ac..225123b37f19 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state) } static int -rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; @@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file, } static int -rs_tiocmget(struct tty_struct *tty, struct file *file) +rs_tiocmget(struct tty_struct *tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned int result; @@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file) static int -rs_ioctl(struct tty_struct *tty, struct file * file, +rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index ab93763862d5..8ee5a41d340d 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -8,7 +8,7 @@ * Jan Dumon <j.dumon@option.com> * * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby <richardx.r.gorby@intel.com> + * Russ Gorby <russ.gorby@intel.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -67,6 +67,7 @@ #define IFX_SPI_MORE_MASK 0x10 #define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ #define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_MODE SPI_MODE_1 #define IFX_SPI_TTY_ID 0 #define IFX_SPI_TIMEOUT_SEC 2 #define IFX_SPI_HEADER_0 (-1) @@ -76,7 +77,7 @@ static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); /* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ +static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ static struct tty_driver *tty_drv; static struct ifx_spi_device *saved_ifx_dev; static struct lock_class_key ifx_spi_key; @@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg) * Map the signal state into Linux modem flags and report the value * in Linux terms */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) +static int ifx_spi_tiocmget(struct tty_struct *tty) { unsigned int value; struct ifx_spi_device *ifx_dev = tty->driver_data; @@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) /** * ifx_spi_tiocmset - set modem bits * @tty: the tty structure - * @filp: file handle issuing the request * @set: bits to set * @clear: bits to clear * @@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) * * FIXME: do we need to kick the tranfers when we do this ? */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, +static int ifx_spi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct ifx_spi_device *ifx_dev = tty->driver_data; @@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data) /* note len is BYTES, not transfers */ ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; + ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; + ifx_dev->spi_xfer.bits_per_word = spi_bpw; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; @@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data) /* * setup dma pointers */ - if (ifx_dev->is_6160) { + if (ifx_dev->use_dma) { ifx_dev->spi_msg.is_dma_mapped = 1; ifx_dev->tx_dma = ifx_dev->tx_bus; ifx_dev->rx_dma = ifx_dev->rx_bus; @@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) goto error_ret; } - pport->ops = &ifx_tty_port_ops; tty_port_init(pport); + pport->ops = &ifx_tty_port_ops; ifx_dev->minor = IFX_SPI_TTY_ID; ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, &ifx_dev->spi_dev->dev); @@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) { int ret; int srdy; - struct ifx_modem_platform_data *pl_data = NULL; + struct ifx_modem_platform_data *pl_data; struct ifx_spi_device *ifx_dev; if (saved_ifx_dev) { @@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return -ENODEV; } + pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + if (!pl_data) { + dev_err(&spi->dev, "missing platform data!"); + return -ENODEV; + } + /* initialize structure to hold our device variables */ ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); if (!ifx_dev) { @@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi) init_timer(&ifx_dev->spi_timer); ifx_dev->spi_timer.function = ifx_spi_timeout; ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; + ifx_dev->modem = pl_data->modem_type; + ifx_dev->use_dma = pl_data->use_dma; + ifx_dev->max_hz = pl_data->max_hz; + /* initialize spi mode, etc */ + spi->max_speed_hz = ifx_dev->max_hz; + spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); + spi->bits_per_word = spi_bpw; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup wasn't successful %d", ret); + return -ENODEV; + } /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; ifx_dev->spi_slave_cts = 0; /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->tx_bus, GFP_KERNEL); @@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ret = -ENOMEM; goto error_ret; } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->rx_bus, GFP_KERNEL); @@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi) goto error_ret; } - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } + ifx_dev->gpio.reset = pl_data->rst_pmu; + ifx_dev->gpio.po = pl_data->pwr_on; + ifx_dev->gpio.mrdy = pl_data->mrdy; + ifx_dev->gpio.srdy = pl_data->srdy; + ifx_dev->gpio.reset_out = pl_data->rst_out; dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, @@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { +static const struct spi_driver ifx_spi_driver = { .driver = { - .name = "ifx6160", + .name = DRVNAME, .bus = &spi_bus_type, .pm = &ifx_spi_pm, .owner = THIS_MODULE}, @@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void) { /* unregister */ tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); + spi_unregister_driver((void *)&ifx_spi_driver); } /** @@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void) return result; } - result = spi_register_driver((void *)&ifx_spi_driver_6160); + result = spi_register_driver((void *)&ifx_spi_driver); if (result) { pr_err("%s: spi_register_driver failed(%d)", DRVNAME, result); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index deb7b8d977dc..e8464baf9e75 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -29,8 +29,6 @@ #define DRVNAME "ifx6x60" #define TTYNAME "ttyIFX" -/* #define IFX_THROTTLE_CODE */ - #define IFX_SPI_MAX_MINORS 1 #define IFX_SPI_TRANSFER_SIZE 2048 #define IFX_SPI_FIFO_SIZE 4096 @@ -88,7 +86,9 @@ struct ifx_spi_device { dma_addr_t rx_dma; dma_addr_t tx_dma; - int is_6160; /* Modem type */ + int modem; /* Modem type */ + int use_dma; /* provide dma-able addrs in SPI msg */ + long max_hz; /* max SPI frequency */ spinlock_t write_lock; int write_pending; diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index d40010a22ecd..c111f36f5d21 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -16,9 +16,7 @@ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans * are used for RX, odd chans for TX * - * 2. In A0 stepping, UART will not support TX half empty flag - * - * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always * asserted, only when the HW is reset the DDCD and DDSR will * be triggered */ @@ -41,8 +39,6 @@ #include <linux/io.h> #include <linux/debugfs.h> -#define MFD_HSU_A0_STEPPING 1 - #define HSU_DMA_BUF_SIZE 2048 #define chan_readl(chan, offset) readl(chan->reg + offset) @@ -51,7 +47,10 @@ #define mfd_readl(obj, offset) readl(obj->reg + offset) #define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) -#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) +static int hsu_dma_enable; +module_param(hsu_dma_enable, int, 0); +MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \ +bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); struct hsu_dma_buffer { u8 *buf; @@ -65,7 +64,6 @@ struct hsu_dma_chan { enum dma_data_direction dirt; struct uart_hsu_port *uport; void __iomem *reg; - struct timer_list rx_timer; /* only needed by RX channel */ }; struct uart_hsu_port { @@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); chan_writel(rxc, HSU_CH_CR, 0x3); - - mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); } /* Protected by spin_lock_irqsave(port->lock) */ @@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) chan_writel(chan, HSU_CH_CR, 0x3); return; } - del_timer(&chan->rx_timer); dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, dbuf->dma_size, DMA_FROM_DEVICE); @@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) tty_flip_buffer_push(tty); chan_writel(chan, HSU_CH_CR, 0x3); - chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; - add_timer(&chan->rx_timer); } @@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up) return; } -#ifndef MFD_HSU_A0_STEPPING + /* The IRQ is for TX FIFO half-empty */ count = up->port.fifosize / 2; -#else - /* - * A0 only supports fully empty IRQ, and the first char written - * into it won't clear the EMPT bit, so we may need be cautious - * by useing a shorter buffer - */ - count = up->port.fifosize - 4; -#endif + do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state) /* * What special to do: * 1. chose the 64B fifo mode - * 2. make sure not to select half empty mode for A0 stepping - * 3. start dma or pio depends on configuration - * 4. we only allocate dma memory when needed + * 2. start dma or pio depends on configuration + * 3. we only allocate dma memory when needed */ static int serial_hsu_startup(struct uart_port *port) { @@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port) container_of(port, struct uart_hsu_port, port); unsigned long flags; - del_timer_sync(&up->rxc->rx_timer); - /* Disable interrupts from this port */ up->ier = 0; serial_out(up, UART_IER, 0); @@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; fcr |= UART_FCR_HSU_64B_FIFO; -#ifdef MFD_HSU_A0_STEPPING - /* A0 doesn't support half empty IRQ */ - fcr |= UART_FCR_FULL_EMPT_TXI; -#endif /* * Ok, we're now changing the port state. Do it with @@ -1343,28 +1322,6 @@ err_disable: return ret; } -static void hsu_dma_rx_timeout(unsigned long data) -{ - struct hsu_dma_chan *chan = (void *)data; - struct uart_hsu_port *up = chan->uport; - struct hsu_dma_buffer *dbuf = &up->rxbuf; - int count = 0; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - - if (!count) { - mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); - goto exit; - } - - hsu_dma_rx(up, 0); -exit: - spin_unlock_irqrestore(&up->port.lock, flags); -} - static void hsu_global_init(void) { struct hsu_port *hsu; @@ -1415,6 +1372,12 @@ static void hsu_global_init(void) serial_hsu_ports[i] = uport; uport->index = i; + + if (hsu_dma_enable & (1<<i)) + uport->use_dma = 1; + else + uport->use_dma = 0; + uport++; } @@ -1427,12 +1390,6 @@ static void hsu_global_init(void) dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + i * HSU_DMA_CHANS_REG_LENGTH; - /* Work around for RX */ - if (dchan->dirt == DMA_FROM_DEVICE) { - init_timer(&dchan->rx_timer); - dchan->rx_timer.function = hsu_dma_rx_timeout; - dchan->rx_timer.data = (unsigned long)dchan; - } dchan++; } diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index b62857bf2fdb..37e13c3d91d9 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -51,7 +51,7 @@ struct uart_max3110 { struct uart_port port; struct spi_device *spi; - char name[24]; + char name[SPI_NAME_SIZE]; wait_queue_head_t wq; struct task_struct *main_thread; diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c new file mode 100644 index 000000000000..2e7fc9cee9cc --- /dev/null +++ b/drivers/tty/serial/msm_serial_hs.c @@ -0,0 +1,1880 @@ +/* + * MSM 7k/8k High speed uart driver + * + * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008 Google Inc. + * Modified: Nick Pelly <npelly@google.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * Has optional support for uart power management independent of linux + * suspend/resume: + * + * RX wakeup. + * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the + * UART RX pin). This should only be used if there is not a wakeup + * GPIO on the UART CTS, and the first RX byte is known (for example, with the + * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will + * always be lost. RTS will be asserted even while the UART is off in this mode + * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq. + */ + +#include <linux/module.h> + +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/wait.h> +#include <linux/workqueue.h> + +#include <linux/atomic.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <linux/platform_data/msm_serial_hs.h> + +/* HSUART Registers */ +#define UARTDM_MR1_ADDR 0x0 +#define UARTDM_MR2_ADDR 0x4 + +/* Data Mover result codes */ +#define RSLT_FIFO_CNTR_BMSK (0xE << 28) +#define RSLT_VLD BIT(1) + +/* write only register */ +#define UARTDM_CSR_ADDR 0x8 +#define UARTDM_CSR_115200 0xFF +#define UARTDM_CSR_57600 0xEE +#define UARTDM_CSR_38400 0xDD +#define UARTDM_CSR_28800 0xCC +#define UARTDM_CSR_19200 0xBB +#define UARTDM_CSR_14400 0xAA +#define UARTDM_CSR_9600 0x99 +#define UARTDM_CSR_7200 0x88 +#define UARTDM_CSR_4800 0x77 +#define UARTDM_CSR_3600 0x66 +#define UARTDM_CSR_2400 0x55 +#define UARTDM_CSR_1200 0x44 +#define UARTDM_CSR_600 0x33 +#define UARTDM_CSR_300 0x22 +#define UARTDM_CSR_150 0x11 +#define UARTDM_CSR_75 0x00 + +/* write only register */ +#define UARTDM_TF_ADDR 0x70 +#define UARTDM_TF2_ADDR 0x74 +#define UARTDM_TF3_ADDR 0x78 +#define UARTDM_TF4_ADDR 0x7C + +/* write only register */ +#define UARTDM_CR_ADDR 0x10 +#define UARTDM_IMR_ADDR 0x14 + +#define UARTDM_IPR_ADDR 0x18 +#define UARTDM_TFWR_ADDR 0x1c +#define UARTDM_RFWR_ADDR 0x20 +#define UARTDM_HCR_ADDR 0x24 +#define UARTDM_DMRX_ADDR 0x34 +#define UARTDM_IRDA_ADDR 0x38 +#define UARTDM_DMEN_ADDR 0x3c + +/* UART_DM_NO_CHARS_FOR_TX */ +#define UARTDM_NCF_TX_ADDR 0x40 + +#define UARTDM_BADR_ADDR 0x44 + +#define UARTDM_SIM_CFG_ADDR 0x80 +/* Read Only register */ +#define UARTDM_SR_ADDR 0x8 + +/* Read Only register */ +#define UARTDM_RF_ADDR 0x70 +#define UARTDM_RF2_ADDR 0x74 +#define UARTDM_RF3_ADDR 0x78 +#define UARTDM_RF4_ADDR 0x7C + +/* Read Only register */ +#define UARTDM_MISR_ADDR 0x10 + +/* Read Only register */ +#define UARTDM_ISR_ADDR 0x14 +#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38 + +#define UARTDM_RXFS_ADDR 0x50 + +/* Register field Mask Mapping */ +#define UARTDM_SR_PAR_FRAME_BMSK BIT(5) +#define UARTDM_SR_OVERRUN_BMSK BIT(4) +#define UARTDM_SR_TXEMT_BMSK BIT(3) +#define UARTDM_SR_TXRDY_BMSK BIT(2) +#define UARTDM_SR_RXRDY_BMSK BIT(0) + +#define UARTDM_CR_TX_DISABLE_BMSK BIT(3) +#define UARTDM_CR_RX_DISABLE_BMSK BIT(1) +#define UARTDM_CR_TX_EN_BMSK BIT(2) +#define UARTDM_CR_RX_EN_BMSK BIT(0) + +/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */ +#define RESET_RX 0x10 +#define RESET_TX 0x20 +#define RESET_ERROR_STATUS 0x30 +#define RESET_BREAK_INT 0x40 +#define START_BREAK 0x50 +#define STOP_BREAK 0x60 +#define RESET_CTS 0x70 +#define RESET_STALE_INT 0x80 +#define RFR_LOW 0xD0 +#define RFR_HIGH 0xE0 +#define CR_PROTECTION_EN 0x100 +#define STALE_EVENT_ENABLE 0x500 +#define STALE_EVENT_DISABLE 0x600 +#define FORCE_STALE_EVENT 0x400 +#define CLEAR_TX_READY 0x300 +#define RESET_TX_ERROR 0x800 +#define RESET_TX_DONE 0x810 + +#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00 +#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f +#define UARTDM_MR1_CTS_CTL_BMSK 0x40 +#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80 + +#define UARTDM_MR2_ERROR_MODE_BMSK 0x40 +#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30 + +/* bits per character configuration */ +#define FIVE_BPC (0 << 4) +#define SIX_BPC (1 << 4) +#define SEVEN_BPC (2 << 4) +#define EIGHT_BPC (3 << 4) + +#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc +#define STOP_BIT_ONE (1 << 2) +#define STOP_BIT_TWO (3 << 2) + +#define UARTDM_MR2_PARITY_MODE_BMSK 0x3 + +/* Parity configuration */ +#define NO_PARITY 0x0 +#define EVEN_PARITY 0x1 +#define ODD_PARITY 0x2 +#define SPACE_PARITY 0x3 + +#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80 +#define UARTDM_IPR_STALE_LSB_BMSK 0x1f + +/* These can be used for both ISR and IMR register */ +#define UARTDM_ISR_TX_READY_BMSK BIT(7) +#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6) +#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5) +#define UARTDM_ISR_RXLEV_BMSK BIT(4) +#define UARTDM_ISR_RXSTALE_BMSK BIT(3) +#define UARTDM_ISR_RXBREAK_BMSK BIT(2) +#define UARTDM_ISR_RXHUNT_BMSK BIT(1) +#define UARTDM_ISR_TXLEV_BMSK BIT(0) + +/* Field definitions for UART_DM_DMEN*/ +#define UARTDM_TX_DM_EN_BMSK 0x1 +#define UARTDM_RX_DM_EN_BMSK 0x2 + +#define UART_FIFOSIZE 64 +#define UARTCLK 7372800 + +/* Rx DMA request states */ +enum flush_reason { + FLUSH_NONE, + FLUSH_DATA_READY, + FLUSH_DATA_INVALID, /* values after this indicate invalid data */ + FLUSH_IGNORE = FLUSH_DATA_INVALID, + FLUSH_STOP, + FLUSH_SHUTDOWN, +}; + +/* UART clock states */ +enum msm_hs_clk_states_e { + MSM_HS_CLK_PORT_OFF, /* port not in use */ + MSM_HS_CLK_OFF, /* clock disabled */ + MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */ + MSM_HS_CLK_ON, /* clock enabled */ +}; + +/* Track the forced RXSTALE flush during clock off sequence. + * These states are only valid during MSM_HS_CLK_REQUEST_OFF */ +enum msm_hs_clk_req_off_state_e { + CLK_REQ_OFF_START, + CLK_REQ_OFF_RXSTALE_ISSUED, + CLK_REQ_OFF_FLUSH_ISSUED, + CLK_REQ_OFF_RXSTALE_FLUSHED, +}; + +/** + * struct msm_hs_tx + * @tx_ready_int_en: ok to dma more tx? + * @dma_in_flight: tx dma in progress + * @xfer: top level DMA command pointer structure + * @command_ptr: third level command struct pointer + * @command_ptr_ptr: second level command list struct pointer + * @mapped_cmd_ptr: DMA view of third level command struct + * @mapped_cmd_ptr_ptr: DMA view of second level command list struct + * @tx_count: number of bytes to transfer in DMA transfer + * @dma_base: DMA view of UART xmit buffer + * + * This structure describes a single Tx DMA transaction. MSM DMA + * commands have two levels of indirection. The top level command + * ptr points to a list of command ptr which in turn points to a + * single DMA 'command'. In our case each Tx transaction consists + * of a single second level pointer pointing to a 'box type' command. + */ +struct msm_hs_tx { + unsigned int tx_ready_int_en; + unsigned int dma_in_flight; + struct msm_dmov_cmd xfer; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + dma_addr_t mapped_cmd_ptr_ptr; + int tx_count; + dma_addr_t dma_base; +}; + +/** + * struct msm_hs_rx + * @flush: Rx DMA request state + * @xfer: top level DMA command pointer structure + * @cmdptr_dmaaddr: DMA view of second level command structure + * @command_ptr: third level DMA command pointer structure + * @command_ptr_ptr: second level DMA command list pointer + * @mapped_cmd_ptr: DMA view of the third level command structure + * @wait: wait for DMA completion before shutdown + * @buffer: destination buffer for RX DMA + * @rbuffer: DMA view of buffer + * @pool: dma pool out of which coherent rx buffer is allocated + * @tty_work: private work-queue for tty flip buffer push task + * + * This structure describes a single Rx DMA transaction. Rx DMA + * transactions use box mode DMA commands. + */ +struct msm_hs_rx { + enum flush_reason flush; + struct msm_dmov_cmd xfer; + dma_addr_t cmdptr_dmaaddr; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + wait_queue_head_t wait; + dma_addr_t rbuffer; + unsigned char *buffer; + struct dma_pool *pool; + struct work_struct tty_work; +}; + +/** + * struct msm_hs_rx_wakeup + * @irq: IRQ line to be configured as interrupt source on Rx activity + * @ignore: boolean value. 1 = ignore the wakeup interrupt + * @rx_to_inject: extra character to be inserted to Rx tty on wakeup + * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character + * + * This is an optional structure required for UART Rx GPIO IRQ based + * wakeup from low power state. UART wakeup can be triggered by RX activity + * (using a wakeup GPIO on the UART RX pin). This should only be used if + * there is not a wakeup GPIO on the UART CTS, and the first RX byte is + * known (eg., with the Bluetooth Texas Instruments HCILL protocol), + * since the first RX byte will always be lost. RTS will be asserted even + * while the UART is clocked off in this mode of operation. + */ +struct msm_hs_rx_wakeup { + int irq; /* < 0 indicates low power wakeup disabled */ + unsigned char ignore; + unsigned char inject_rx; + char rx_to_inject; +}; + +/** + * struct msm_hs_port + * @uport: embedded uart port structure + * @imr_reg: shadow value of UARTDM_IMR + * @clk: uart input clock handle + * @tx: Tx transaction related data structure + * @rx: Rx transaction related data structure + * @dma_tx_channel: Tx DMA command channel + * @dma_rx_channel Rx DMA command channel + * @dma_tx_crci: Tx channel rate control interface number + * @dma_rx_crci: Rx channel rate control interface number + * @clk_off_timer: Timer to poll DMA event completion before clock off + * @clk_off_delay: clk_off_timer poll interval + * @clk_state: overall clock state + * @clk_req_off_state: post flush clock states + * @rx_wakeup: optional rx_wakeup feature related data + * @exit_lpm_cb: optional callback to exit low power mode + * + * Low level serial port structure. + */ +struct msm_hs_port { + struct uart_port uport; + unsigned long imr_reg; + struct clk *clk; + struct msm_hs_tx tx; + struct msm_hs_rx rx; + + int dma_tx_channel; + int dma_rx_channel; + int dma_tx_crci; + int dma_rx_crci; + + struct hrtimer clk_off_timer; + ktime_t clk_off_delay; + enum msm_hs_clk_states_e clk_state; + enum msm_hs_clk_req_off_state_e clk_req_off_state; + + struct msm_hs_rx_wakeup rx_wakeup; + void (*exit_lpm_cb)(struct uart_port *); +}; + +#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */ +#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE +#define UARTDM_RX_BUF_SIZE 512 + +#define UARTDM_NR 2 + +static struct msm_hs_port q_uart_port[UARTDM_NR]; +static struct platform_driver msm_serial_hs_platform_driver; +static struct uart_driver msm_hs_driver; +static struct uart_ops msm_hs_ops; +static struct workqueue_struct *msm_hs_workqueue; + +#define UARTDM_TO_MSM(uart_port) \ + container_of((uart_port), struct msm_hs_port, uport) + +static unsigned int use_low_power_rx_wakeup(struct msm_hs_port + *msm_uport) +{ + return (msm_uport->rx_wakeup.irq >= 0); +} + +static unsigned int msm_hs_read(struct uart_port *uport, + unsigned int offset) +{ + return ioread32(uport->membase + offset); +} + +static void msm_hs_write(struct uart_port *uport, unsigned int offset, + unsigned int value) +{ + iowrite32(value, uport->membase + offset); +} + +static void msm_hs_release_port(struct uart_port *port) +{ + iounmap(port->membase); +} + +static int msm_hs_request_port(struct uart_port *port) +{ + port->membase = ioremap(port->mapbase, PAGE_SIZE); + if (unlikely(!port->membase)) + return -ENOMEM; + + /* configure the CR Protection to Enable */ + msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN); + return 0; +} + +static int __devexit msm_hs_remove(struct platform_device *pdev) +{ + + struct msm_hs_port *msm_uport; + struct device *dev; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + dev = msm_uport->uport.dev; + + dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); + dma_pool_destroy(msm_uport->rx.pool); + + dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + + uart_remove_one_port(&msm_hs_driver, &msm_uport->uport); + clk_put(msm_uport->clk); + + /* Free the tx resources */ + kfree(msm_uport->tx.command_ptr); + kfree(msm_uport->tx.command_ptr_ptr); + + /* Free the rx resources */ + kfree(msm_uport->rx.command_ptr); + kfree(msm_uport->rx.command_ptr_ptr); + + iounmap(msm_uport->uport.membase); + + return 0; +} + +static int msm_hs_init_clk_locked(struct uart_port *uport) +{ + int ret; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + ret = clk_enable(msm_uport->clk); + if (ret) { + printk(KERN_ERR "Error could not turn on UART clk\n"); + return ret; + } + + /* Set up the MREG/NREG/DREG/MNDREG */ + ret = clk_set_rate(msm_uport->clk, uport->uartclk); + if (ret) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + clk_disable(msm_uport->clk); + return ret; + } + + msm_uport->clk_state = MSM_HS_CLK_ON; + return 0; +} + +/* Enable and Disable clocks (Used for power management) */ +static void msm_hs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (use_low_power_rx_wakeup(msm_uport) || + msm_uport->exit_lpm_cb) + return; /* ignore linux PM states, + use msm_hs_request_clock API */ + + switch (state) { + case 0: + clk_enable(msm_uport->clk); + break; + case 3: + clk_disable(msm_uport->clk); + break; + default: + dev_err(uport->dev, "msm_serial: Unknown PM state %d\n", + state); + } +} + +/* + * programs the UARTDM_CSR register with correct bit rates + * + * Interrupts should be disabled before we are called, as + * we modify Set Baud rate + * Set receive stale interrupt level, dependant on Bit Rate + * Goal is to have around 8 ms before indicate stale. + * roundup (((Bit Rate * .008) / 10) + 1 + */ +static void msm_hs_set_bps_locked(struct uart_port *uport, + unsigned int bps) +{ + unsigned long rxstale; + unsigned long data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + switch (bps) { + case 300: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75); + rxstale = 1; + break; + case 600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150); + rxstale = 1; + break; + case 1200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300); + rxstale = 1; + break; + case 2400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600); + rxstale = 1; + break; + case 4800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200); + rxstale = 1; + break; + case 9600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + rxstale = 2; + break; + case 14400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600); + rxstale = 3; + break; + case 19200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800); + rxstale = 4; + break; + case 28800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200); + rxstale = 6; + break; + case 38400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600); + rxstale = 8; + break; + case 57600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400); + rxstale = 16; + break; + case 76800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200); + rxstale = 16; + break; + case 115200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800); + rxstale = 31; + break; + case 230400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600); + rxstale = 31; + break; + case 460800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + case 4000000: + case 3686400: + case 3200000: + case 3500000: + case 3000000: + case 2500000: + case 1500000: + case 1152000: + case 1000000: + case 921600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + default: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + /* default to 9600 */ + bps = 9600; + rxstale = 2; + break; + } + if (bps > 460800) + uport->uartclk = bps * 16; + else + uport->uartclk = UARTCLK; + + if (clk_set_rate(msm_uport->clk, uport->uartclk)) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + return; + } + + data = rxstale & UARTDM_IPR_STALE_LSB_BMSK; + data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2); + + msm_hs_write(uport, UARTDM_IPR_ADDR, data); +} + +/* + * termios : new ktermios + * oldtermios: old ktermios previous setting + * + * Configure the serial port + */ +static void msm_hs_set_termios(struct uart_port *uport, + struct ktermios *termios, + struct ktermios *oldtermios) +{ + unsigned int bps; + unsigned long data; + unsigned long flags; + unsigned int c_cflag = termios->c_cflag; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* 300 is the minimum baud support by the driver */ + bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000); + + /* Temporary remapping 200 BAUD to 3.2 mbps */ + if (bps == 200) + bps = 3200000; + + msm_hs_set_bps_locked(uport, bps); + + data = msm_hs_read(uport, UARTDM_MR2_ADDR); + data &= ~UARTDM_MR2_PARITY_MODE_BMSK; + /* set parity */ + if (PARENB == (c_cflag & PARENB)) { + if (PARODD == (c_cflag & PARODD)) + data |= ODD_PARITY; + else if (CMSPAR == (c_cflag & CMSPAR)) + data |= SPACE_PARITY; + else + data |= EVEN_PARITY; + } + + /* Set bits per char */ + data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK; + + switch (c_cflag & CSIZE) { + case CS5: + data |= FIVE_BPC; + break; + case CS6: + data |= SIX_BPC; + break; + case CS7: + data |= SEVEN_BPC; + break; + default: + data |= EIGHT_BPC; + break; + } + /* stop bits */ + if (c_cflag & CSTOPB) { + data |= STOP_BIT_TWO; + } else { + /* otherwise 1 stop bit */ + data |= STOP_BIT_ONE; + } + data |= UARTDM_MR2_ERROR_MODE_BMSK; + /* write parity/bits per char/stop bit configuration */ + msm_hs_write(uport, UARTDM_MR2_ADDR, data); + + /* Configure HW flow control */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK); + + if (c_cflag & CRTSCTS) { + data |= UARTDM_MR1_CTS_CTL_BMSK; + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + } + + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + uport->ignore_status_mask = termios->c_iflag & INPCK; + uport->ignore_status_mask |= termios->c_iflag & IGNPAR; + uport->read_status_mask = (termios->c_cflag & CREAD); + + msm_hs_write(uport, UARTDM_IMR_ADDR, 0); + + /* Set Transmit software time out */ + uart_update_timeout(uport, c_cflag, bps); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + + if (msm_uport->rx.flush == FLUSH_NONE) { + msm_uport->rx.flush = FLUSH_IGNORE; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* + * Standard API, Transmitter + * Any character in the transmit shift register is sent + */ +static unsigned int msm_hs_tx_empty(struct uart_port *uport) +{ + unsigned int data; + unsigned int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + data = msm_hs_read(uport, UARTDM_SR_ADDR); + if (data & UARTDM_SR_TXEMT_BMSK) + ret = TIOCSER_TEMT; + + clk_disable(msm_uport->clk); + + return ret; +} + +/* + * Standard API, Stop transmitter. + * Any character in the transmit shift register is sent as + * well as the current data mover transfer . + */ +static void msm_hs_stop_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_uport->tx.tx_ready_int_en = 0; +} + +/* + * Standard API, Stop receiver as soon as possible. + * + * Function immediately terminates the operation of the + * channel receiver and any incoming characters are lost. None + * of the receiver status bits are affected by this command and + * characters that are already in the receive FIFO there. + */ +static void msm_hs_stop_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + clk_enable(msm_uport->clk); + + /* disable dlink */ + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data &= ~UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Disable the receiver */ + if (msm_uport->rx.flush == FLUSH_NONE) + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) + msm_uport->rx.flush = FLUSH_STOP; + + clk_disable(msm_uport->clk); +} + +/* Transmit the next chunk of data */ +static void msm_hs_submit_tx_locked(struct uart_port *uport) +{ + int left; + int tx_count; + dma_addr_t src_addr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct circ_buf *tx_buf = &msm_uport->uport.state->xmit; + + if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) { + msm_hs_stop_tx_locked(uport); + return; + } + + tx->dma_in_flight = 1; + + tx_count = uart_circ_chars_pending(tx_buf); + + if (UARTDM_TX_BUF_SIZE < tx_count) + tx_count = UARTDM_TX_BUF_SIZE; + + left = UART_XMIT_SIZE - tx_buf->tail; + + if (tx_count > left) + tx_count = left; + + src_addr = tx->dma_base + tx_buf->tail; + dma_sync_single_for_device(uport->dev, src_addr, tx_count, + DMA_TO_DEVICE); + + tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) | + ((tx_count + 15) >> 4); + tx->command_ptr->src_row_addr = src_addr; + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr); + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + + /* Save tx_count to use in Callback */ + tx->tx_count = tx_count; + msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count); + + /* Disable the tx_ready interrupt */ + msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer); +} + +/* Start to receive the next chunk of data */ +static void msm_hs_start_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE); + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE); + msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + msm_uport->rx.flush = FLUSH_NONE; + msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer); + + /* might have finished RX and be ready to clock off */ + hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay, + HRTIMER_MODE_REL); +} + +/* Enable the transmitter Interrupt */ +static void msm_hs_start_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + if (msm_uport->exit_lpm_cb) + msm_uport->exit_lpm_cb(uport); + + if (msm_uport->tx.tx_ready_int_en == 0) { + msm_uport->tx.tx_ready_int_en = 1; + msm_hs_submit_tx_locked(uport); + } + + clk_disable(msm_uport->clk); +} + +/* + * This routine is called when we are done with a DMA transfer + * + * This routine is registered with Data mover when we set + * up a Data Mover transfer. It is called from Data mover ISR + * when the DMA transfer is done. + */ +static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + unsigned long flags; + struct msm_hs_port *msm_uport; + + /* DMA did not finish properly */ + WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) && + !(result & RSLT_VLD)); + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer); + + spin_lock_irqsave(&msm_uport->uport.lock, flags); + clk_enable(msm_uport->clk); + + msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&msm_uport->uport.lock, flags); +} + +/* + * This routine is called when we are done with a DMA transfer or the + * a flush has been sent to the data mover driver. + * + * This routine is registered with Data mover when we set up a Data Mover + * transfer. It is called from Data mover ISR when the DMA transfer is done. + */ +static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + int retval; + int rx_count; + unsigned long status; + unsigned int error_f = 0; + unsigned long flags; + unsigned int flush; + struct tty_struct *tty; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer); + uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + tty = uport->state->port.tty; + + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + + status = msm_hs_read(uport, UARTDM_SR_ADDR); + + /* overflow is not connect to data in a FIFO */ + if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) && + (uport->read_status_mask & CREAD))) { + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + uport->icount.buf_overrun++; + error_f = 1; + } + + if (!(uport->ignore_status_mask & INPCK)) + status = status & ~(UARTDM_SR_PAR_FRAME_BMSK); + + if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) { + /* Can not tell difference between parity & frame error */ + uport->icount.parity++; + error_f = 1; + if (uport->ignore_status_mask & IGNPAR) + tty_insert_flip_char(tty, 0, TTY_PARITY); + } + + if (error_f) + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED) + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED; + + flush = msm_uport->rx.flush; + if (flush == FLUSH_IGNORE) + msm_hs_start_rx_locked(uport); + if (flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_SHUTDOWN; + if (flush >= FLUSH_DATA_INVALID) + goto out; + + rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR); + + if (0 != (uport->read_status_mask & CREAD)) { + retval = tty_insert_flip_string(tty, msm_uport->rx.buffer, + rx_count); + BUG_ON(retval != rx_count); + } + + msm_hs_start_rx_locked(uport); + +out: + clk_disable(msm_uport->clk); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (flush < FLUSH_DATA_INVALID) + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); +} + +static void msm_hs_tty_flip_buffer_work(struct work_struct *work) +{ + struct msm_hs_port *msm_uport = + container_of(work, struct msm_hs_port, rx.tty_work); + struct tty_struct *tty = msm_uport->uport.state->port.tty; + + tty_flip_buffer_push(tty); +} + +/* + * Standard API, Current states of modem control inputs + * + * Since CTS can be handled entirely by HARDWARE we always + * indicate clear to send and count on the TX FIFO to block when + * it fills up. + * + * - TIOCM_DCD + * - TIOCM_CTS + * - TIOCM_DSR + * - TIOCM_RI + * (Unsupported) DCD and DSR will return them high. RI will return low. + */ +static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* + * True enables UART auto RFR, which indicates we are ready for data if the RX + * buffer is not full. False disables auto RFR, and deasserts RFR to indicate + * we are not ready for data. Must be called with UART clock on. + */ +static void set_rfr_locked(struct uart_port *uport, int auto_rfr) +{ + unsigned int data; + + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + if (auto_rfr) { + /* enable auto ready-for-receiving */ + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + } else { + /* disable auto ready-for-receiving */ + data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + /* RFR is active low, set high */ + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH); + } +} + +/* + * Standard API, used to set or clear RFR + */ +static void msm_hs_set_mctrl_locked(struct uart_port *uport, + unsigned int mctrl) +{ + unsigned int auto_rfr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + auto_rfr = TIOCM_RTS & mctrl ? 1 : 0; + set_rfr_locked(uport, auto_rfr); + + clk_disable(msm_uport->clk); +} + +/* Standard API, Enable modem status (CTS) interrupt */ +static void msm_hs_enable_ms_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + /* Enable DELTA_CTS Interrupt */ + msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + +} + +/* + * Standard API, Break Signal + * + * Control the transmission of a break signal. ctl eq 0 => break + * signal terminate ctl ne 0 => start break signal + */ +static void msm_hs_break_ctl(struct uart_port *uport, int ctl) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK); + clk_disable(msm_uport->clk); +} + +static void msm_hs_config_port(struct uart_port *uport, int cfg_flags) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + if (cfg_flags & UART_CONFIG_TYPE) { + uport->type = PORT_MSM; + msm_hs_request_port(uport); + } + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* Handle CTS changes (Called from interrupt handler) */ +static void msm_hs_handle_delta_cts(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* clear interrupt */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + uport->icount.cts++; + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); + + /* clear the IOCTL TIOCMIWAIT if called */ + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +/* check if the TX path is flushed, and if so clock off + * returns 0 did not clock off, need to retry (still sending final byte) + * -1 did not clock off, do not retry + * 1 if we clocked off + */ +static int msm_hs_check_clock_off_locked(struct uart_port *uport) +{ + unsigned long sr_status; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + + /* Cancel if tx tty buffer is not empty, dma is in flight, + * or tx fifo is not empty, or rx fifo is not empty */ + if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF || + !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight || + (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) || + !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) { + return -1; + } + + /* Make sure the uart is finished with the last byte */ + sr_status = msm_hs_read(uport, UARTDM_SR_ADDR); + if (!(sr_status & UARTDM_SR_TXEMT_BMSK)) + return 0; /* retry */ + + /* Make sure forced RXSTALE flush complete */ + switch (msm_uport->clk_req_off_state) { + case CLK_REQ_OFF_START: + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED; + msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT); + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_ISSUED: + case CLK_REQ_OFF_FLUSH_ISSUED: + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_FLUSHED: + break; /* continue */ + } + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) { + if (msm_uport->rx.flush == FLUSH_NONE) + msm_hs_stop_rx_locked(uport); + return 0; /* come back later to really clock off */ + } + + /* we really want to clock off */ + clk_disable(msm_uport->clk); + msm_uport->clk_state = MSM_HS_CLK_OFF; + + if (use_low_power_rx_wakeup(msm_uport)) { + msm_uport->rx_wakeup.ignore = 1; + enable_irq(msm_uport->rx_wakeup.irq); + } + return 1; +} + +static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer) +{ + unsigned long flags; + int ret = HRTIMER_NORESTART; + struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port, + clk_off_timer); + struct uart_port *uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + + if (!msm_hs_check_clock_off_locked(uport)) { + hrtimer_forward_now(timer, msm_uport->clk_off_delay); + ret = HRTIMER_RESTART; + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return ret; +} + +static irqreturn_t msm_hs_isr(int irq, void *dev) +{ + unsigned long flags; + unsigned long isr_status; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + spin_lock_irqsave(&uport->lock, flags); + + isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR); + + /* Uart RX starting */ + if (isr_status & UARTDM_ISR_RXLEV_BMSK) { + msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } + /* Stale rx interrupt */ + if (isr_status & UARTDM_ISR_RXSTALE_BMSK) { + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED) + msm_uport->clk_req_off_state = + CLK_REQ_OFF_FLUSH_ISSUED; + if (rx->flush == FLUSH_NONE) { + rx->flush = FLUSH_DATA_READY; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + } + /* tx ready interrupt */ + if (isr_status & UARTDM_ISR_TX_READY_BMSK) { + /* Clear TX Ready */ + msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY); + + if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) { + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, + msm_uport->imr_reg); + } + + /* Complete DMA TX transactions and submit new transactions */ + tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE; + + tx->dma_in_flight = 0; + + uport->icount.tx += tx->tx_count; + if (tx->tx_ready_int_en) + msm_hs_submit_tx_locked(uport); + + if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS) + uart_write_wakeup(uport); + } + if (isr_status & UARTDM_ISR_TXLEV_BMSK) { + /* TX FIFO is empty */ + msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + if (!msm_hs_check_clock_off_locked(uport)) + hrtimer_start(&msm_uport->clk_off_timer, + msm_uport->clk_off_delay, + HRTIMER_MODE_REL); + } + + /* Change in CTS interrupt */ + if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK) + msm_hs_handle_delta_cts(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +void msm_hs_request_clock_off_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (msm_uport->clk_state == MSM_HS_CLK_ON) { + msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF; + msm_uport->clk_req_off_state = CLK_REQ_OFF_START; + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 0); + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } +} + +/** + * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart + * clock once pending TX is flushed and Rx DMA command is terminated. + * @uport: uart_port structure for the device instance. + * + * This functions puts the device into a partially active low power mode. It + * waits to complete all pending tx transactions, flushes ongoing Rx DMA + * command and terminates UART side Rx transaction, puts UART HW in non DMA + * mode and then clocks off the device. A client calls this when no UART + * data is expected. msm_request_clock_on() must be called before any further + * UART can be sent or received. + */ +void msm_hs_request_clock_off(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_off_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +void msm_hs_request_clock_on_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + switch (msm_uport->clk_state) { + case MSM_HS_CLK_OFF: + clk_enable(msm_uport->clk); + disable_irq_nosync(msm_uport->rx_wakeup.irq); + /* fall-through */ + case MSM_HS_CLK_REQUEST_OFF: + if (msm_uport->rx.flush == FLUSH_STOP || + msm_uport->rx.flush == FLUSH_SHUTDOWN) { + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data |= UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + } + hrtimer_try_to_cancel(&msm_uport->clk_off_timer); + if (msm_uport->rx.flush == FLUSH_SHUTDOWN) + msm_hs_start_rx_locked(uport); + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 1); + if (msm_uport->rx.flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_IGNORE; + msm_uport->clk_state = MSM_HS_CLK_ON; + break; + case MSM_HS_CLK_ON: + break; + case MSM_HS_CLK_PORT_OFF: + break; + } +} + +/** + * msm_hs_request_clock_on - Switch the device from partially active low + * power mode to fully active (i.e. clock on) mode. + * @uport: uart_port structure for the device. + * + * This function switches on the input clock, puts UART HW into DMA mode + * and enqueues an Rx DMA command if the device was in partially active + * mode. It has no effect if called with the device in inactive state. + */ +void msm_hs_request_clock_on(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_on_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) +{ + unsigned int wakeup = 0; + unsigned long flags; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct tty_struct *tty = NULL; + + spin_lock_irqsave(&uport->lock, flags); + if (msm_uport->clk_state == MSM_HS_CLK_OFF) { + /* ignore the first irq - it is a pending irq that occured + * before enable_irq() */ + if (msm_uport->rx_wakeup.ignore) + msm_uport->rx_wakeup.ignore = 0; + else + wakeup = 1; + } + + if (wakeup) { + /* the uart was clocked off during an rx, wake up and + * optionally inject char into tty rx */ + msm_hs_request_clock_on_locked(uport); + if (msm_uport->rx_wakeup.inject_rx) { + tty = uport->state->port.tty; + tty_insert_flip_char(tty, + msm_uport->rx_wakeup.rx_to_inject, + TTY_NORMAL); + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); + } + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +static const char *msm_hs_type(struct uart_port *port) +{ + return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL; +} + +/* Called when port is opened */ +static int msm_hs_startup(struct uart_port *uport) +{ + int ret; + int rfr_level; + unsigned long flags; + unsigned int data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + rfr_level = uport->fifosize; + if (rfr_level > 16) + rfr_level -= 16; + + tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE, + DMA_TO_DEVICE); + + /* do not let tty layer execute RX in global workqueue, use a + * dedicated workqueue managed by this driver */ + uport->state->port.tty->low_latency = 1; + + /* turn on uart clk */ + ret = msm_hs_init_clk_locked(uport); + if (unlikely(ret)) { + printk(KERN_ERR "Turning uartclk failed!\n"); + goto err_msm_hs_init_clk; + } + + /* Set auto RFR Level */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK; + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK; + data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2)); + data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level); + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + /* Make sure RXSTALE count is non-zero */ + data = msm_hs_read(uport, UARTDM_IPR_ADDR); + if (!data) { + data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK; + msm_hs_write(uport, UARTDM_IPR_ADDR, data); + } + + /* Enable Data Mover Mode */ + data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Reset TX */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW); + /* Turn on Uart Receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK); + + /* Turn on Uart Transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK); + + /* Initialize the tx */ + tx->tx_ready_int_en = 0; + tx->dma_in_flight = 0; + + tx->xfer.complete_func = msm_hs_dmov_tx_callback; + tx->xfer.execute_func = NULL; + + tx->command_ptr->cmd = CMD_LC | + CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX; + + tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + + tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16); + + tx->command_ptr->dst_row_addr = + msm_uport->uport.mapbase + UARTDM_TF_ADDR; + + + /* Turn on Uart Receive */ + rx->xfer.complete_func = msm_hs_dmov_rx_callback; + rx->xfer.execute_func = NULL; + + rx->command_ptr->cmd = CMD_LC | + CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX; + + rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE; + rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR; + + + msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK; + /* Enable reading the current CTS, no harm even if CTS is ignored */ + msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK; + + msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */ + + + ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH, + "msm_hs_uart", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n"); + goto err_request_irq; + } + if (use_low_power_rx_wakeup(msm_uport)) { + ret = request_irq(msm_uport->rx_wakeup.irq, + msm_hs_rx_wakeup_isr, + IRQF_TRIGGER_FALLING, + "msm_hs_rx_wakeup", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n"); + free_irq(uport->irq, msm_uport); + goto err_request_irq; + } + disable_irq(msm_uport->rx_wakeup.irq); + } + + spin_lock_irqsave(&uport->lock, flags); + + msm_hs_write(uport, UARTDM_RFWR_ADDR, 0); + msm_hs_start_rx_locked(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + ret = pm_runtime_set_active(uport->dev); + if (ret) + dev_err(uport->dev, "set active error:%d\n", ret); + pm_runtime_enable(uport->dev); + + return 0; + +err_request_irq: +err_msm_hs_init_clk: + dma_unmap_single(uport->dev, tx->dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + return ret; +} + +/* Initialize tx and rx data structures */ +static int __devinit uartdm_init_port(struct uart_port *uport) +{ + int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr) + return -ENOMEM; + + tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr_ptr) { + ret = -ENOMEM; + goto err_tx_command_ptr_ptr; + } + + tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev, + tx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr); + + init_waitqueue_head(&rx->wait); + + rx->pool = dma_pool_create("rx_buffer_pool", uport->dev, + UARTDM_RX_BUF_SIZE, 16, 0); + if (!rx->pool) { + pr_err("%s(): cannot allocate rx_buffer_pool", __func__); + ret = -ENOMEM; + goto err_dma_pool_create; + } + + rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer); + if (!rx->buffer) { + pr_err("%s(): cannot allocate rx->buffer", __func__); + ret = -ENOMEM; + goto err_dma_pool_alloc; + } + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr; + } + + rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr_ptr; + } + + rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) | + (UARTDM_RX_BUF_SIZE >> 4); + + rx->command_ptr->dst_row_addr = rx->rbuffer; + + rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr); + + rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr); + + INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work); + + return ret; + +err_rx_command_ptr_ptr: + kfree(rx->command_ptr); +err_rx_command_ptr: + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); +err_dma_pool_alloc: + dma_pool_destroy(msm_uport->rx.pool); +err_dma_pool_create: + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + kfree(msm_uport->tx.command_ptr_ptr); +err_tx_command_ptr_ptr: + kfree(msm_uport->tx.command_ptr); + return ret; +} + +static int __devinit msm_hs_probe(struct platform_device *pdev) +{ + int ret; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + struct resource *resource; + const struct msm_serial_hs_platform_data *pdata = + pdev->dev.platform_data; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + uport = &msm_uport->uport; + + uport->dev = &pdev->dev; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + + uport->mapbase = resource->start; + uport->irq = platform_get_irq(pdev, 0); + if (unlikely(uport->irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(uport->irq, 1))) + return -ENXIO; + + if (pdata == NULL || pdata->rx_wakeup_irq < 0) + msm_uport->rx_wakeup.irq = -1; + else { + msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq; + msm_uport->rx_wakeup.ignore = 1; + msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup; + msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject; + + if (unlikely(msm_uport->rx_wakeup.irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1))) + return -ENXIO; + } + + if (pdata == NULL) + msm_uport->exit_lpm_cb = NULL; + else + msm_uport->exit_lpm_cb = pdata->exit_lpm_cb; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_channels"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_channel = resource->start; + msm_uport->dma_rx_channel = resource->end; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_crci"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_crci = resource->start; + msm_uport->dma_rx_crci = resource->end; + + uport->iotype = UPIO_MEM; + uport->fifosize = UART_FIFOSIZE; + uport->ops = &msm_hs_ops; + uport->flags = UPF_BOOT_AUTOCONF; + uport->uartclk = UARTCLK; + msm_uport->imr_reg = 0x0; + msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk"); + if (IS_ERR(msm_uport->clk)) + return PTR_ERR(msm_uport->clk); + + ret = uartdm_init_port(uport); + if (unlikely(ret)) + return ret; + + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + msm_uport->clk_off_timer.function = msm_hs_clk_off_retry; + msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */ + + uport->line = pdev->id; + return uart_add_one_port(&msm_hs_driver, uport); +} + +static int __init msm_serial_hs_init(void) +{ + int ret, i; + + /* Init all UARTS as non-configured */ + for (i = 0; i < UARTDM_NR; i++) + q_uart_port[i].uport.type = PORT_UNKNOWN; + + msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs"); + if (unlikely(!msm_hs_workqueue)) + return -ENOMEM; + + ret = uart_register_driver(&msm_hs_driver); + if (unlikely(ret)) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_uart_register_driver; + } + + ret = platform_driver_register(&msm_serial_hs_platform_driver); + if (ret) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_platform_driver_register; + } + + return ret; + +err_platform_driver_register: + uart_unregister_driver(&msm_hs_driver); +err_uart_register_driver: + destroy_workqueue(msm_hs_workqueue); + return ret; +} +module_init(msm_serial_hs_init); + +/* + * Called by the upper layer when port is closed. + * - Disables the port + * - Unhook the ISR + */ +static void msm_hs_shutdown(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + BUG_ON(msm_uport->rx.flush < FLUSH_STOP); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* Disable the transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK); + /* Disable the receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK); + + pm_runtime_disable(uport->dev); + pm_runtime_set_suspended(uport->dev); + + /* Free the interrupt */ + free_irq(uport->irq, msm_uport); + if (use_low_power_rx_wakeup(msm_uport)) + free_irq(msm_uport->rx_wakeup.irq, msm_uport); + + msm_uport->imr_reg = 0; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN); + + clk_disable(msm_uport->clk); /* to balance local clk_enable() */ + if (msm_uport->clk_state != MSM_HS_CLK_OFF) + clk_disable(msm_uport->clk); /* to balance clk_state */ + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + + dma_unmap_single(uport->dev, msm_uport->tx.dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (cancel_work_sync(&msm_uport->rx.tty_work)) + msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work); +} + +static void __exit msm_serial_hs_exit(void) +{ + flush_workqueue(msm_hs_workqueue); + destroy_workqueue(msm_hs_workqueue); + platform_driver_unregister(&msm_serial_hs_platform_driver); + uart_unregister_driver(&msm_hs_driver); +} +module_exit(msm_serial_hs_exit); + +#ifdef CONFIG_PM_RUNTIME +static int msm_hs_runtime_idle(struct device *dev) +{ + /* + * returning success from idle results in runtime suspend to be + * called + */ + return 0; +} + +static int msm_hs_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_on(&msm_uport->uport); + return 0; +} + +static int msm_hs_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_off(&msm_uport->uport); + return 0; +} +#else +#define msm_hs_runtime_idle NULL +#define msm_hs_runtime_resume NULL +#define msm_hs_runtime_suspend NULL +#endif + +static const struct dev_pm_ops msm_hs_dev_pm_ops = { + .runtime_suspend = msm_hs_runtime_suspend, + .runtime_resume = msm_hs_runtime_resume, + .runtime_idle = msm_hs_runtime_idle, +}; + +static struct platform_driver msm_serial_hs_platform_driver = { + .probe = msm_hs_probe, + .remove = __devexit_p(msm_hs_remove), + .driver = { + .name = "msm_serial_hs", + .owner = THIS_MODULE, + .pm = &msm_hs_dev_pm_ops, + }, +}; + +static struct uart_driver msm_hs_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial_hs", + .dev_name = "ttyHS", + .nr = UARTDM_NR, + .cons = 0, +}; + +static struct uart_ops msm_hs_ops = { + .tx_empty = msm_hs_tx_empty, + .set_mctrl = msm_hs_set_mctrl_locked, + .get_mctrl = msm_hs_get_mctrl_locked, + .stop_tx = msm_hs_stop_tx_locked, + .start_tx = msm_hs_start_tx_locked, + .stop_rx = msm_hs_stop_rx_locked, + .enable_ms = msm_hs_enable_ms_locked, + .break_ctl = msm_hs_break_ctl, + .startup = msm_hs_startup, + .shutdown = msm_hs_shutdown, + .set_termios = msm_hs_set_termios, + .pm = msm_hs_pm, + .type = msm_hs_type, + .config_port = msm_hs_config_port, + .release_port = msm_hs_release_port, + .request_port = msm_hs_request_port, +}; + +MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset"); +MODULE_VERSION("1.2"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c new file mode 100644 index 000000000000..beeff1e86093 --- /dev/null +++ b/drivers/tty/serial/msm_smd_tty.c @@ -0,0 +1,236 @@ +/* drivers/tty/serial/msm_smd_tty.c + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/wait.h> + +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> + +#include <mach/msm_smd.h> + +#define MAX_SMD_TTYS 32 + +struct smd_tty_info { + struct tty_port port; + smd_channel_t *ch; +}; + +struct smd_tty_channel_desc { + int id; + const char *name; +}; + +static struct smd_tty_info smd_tty[MAX_SMD_TTYS]; + +static const struct smd_tty_channel_desc smd_default_tty_channels[] = { + { .id = 0, .name = "SMD_DS" }, + { .id = 27, .name = "SMD_GPSNMEA" }, +}; + +static const struct smd_tty_channel_desc *smd_tty_channels = + smd_default_tty_channels; +static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels); + +static void smd_tty_notify(void *priv, unsigned event) +{ + unsigned char *ptr; + int avail; + struct smd_tty_info *info = priv; + struct tty_struct *tty; + + if (event != SMD_EVENT_DATA) + return; + + tty = tty_port_tty_get(&info->port); + if (!tty) + return; + + for (;;) { + if (test_bit(TTY_THROTTLED, &tty->flags)) + break; + avail = smd_read_avail(info->ch); + if (avail == 0) + break; + + avail = tty_prepare_flip_string(tty, &ptr, avail); + + if (smd_read(info->ch, ptr, avail) != avail) { + /* shouldn't be possible since we're in interrupt + ** context here and nobody else could 'steal' our + ** characters. + */ + pr_err("OOPS - smd_tty_buffer mismatch?!"); + } + + tty_flip_buffer_push(tty); + } + + /* XXX only when writable and necessary */ + tty_wakeup(tty); + tty_kref_put(tty); +} + +static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty) +{ + int i, res = 0; + int n = tty->index; + const char *name = NULL; + struct smd_tty_info *info = smd_tty + n; + + for (i = 0; i < smd_tty_channels_len; i++) { + if (smd_tty_channels[i].id == n) { + name = smd_tty_channels[i].name; + break; + } + } + if (!name) + return -ENODEV; + + if (info->ch) + smd_kick(info->ch); + else + res = smd_open(name, &info->ch, info, smd_tty_notify); + + if (!res) + tty->driver_data = info; + + return res; +} + +static void smd_tty_port_shutdown(struct tty_port *tport) +{ + struct smd_tty_info *info; + struct tty_struct *tty = tty_port_tty_get(tport); + + info = tty->driver_data; + if (info->ch) { + smd_close(info->ch); + info->ch = 0; + } + + tty->driver_data = 0; + tty_kref_put(tty); +} + +static int smd_tty_open(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = smd_tty + tty->index; + + return tty_port_open(&info->port, tty, f); +} + +static void smd_tty_close(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = tty->driver_data; + + tty_port_close(&info->port, tty, f); +} + +static int smd_tty_write(struct tty_struct *tty, + const unsigned char *buf, int len) +{ + struct smd_tty_info *info = tty->driver_data; + int avail; + + /* if we're writing to a packet channel we will + ** never be able to write more data than there + ** is currently space for + */ + avail = smd_write_avail(info->ch); + if (len > avail) + len = avail; + + return smd_write(info->ch, buf, len); +} + +static int smd_tty_write_room(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_write_avail(info->ch); +} + +static int smd_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_read_avail(info->ch); +} + +static void smd_tty_unthrottle(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + smd_kick(info->ch); +} + +static const struct tty_port_operations smd_tty_port_ops = { + .shutdown = smd_tty_port_shutdown, + .activate = smd_tty_port_activate, +}; + +static const struct tty_operations smd_tty_ops = { + .open = smd_tty_open, + .close = smd_tty_close, + .write = smd_tty_write, + .write_room = smd_tty_write_room, + .chars_in_buffer = smd_tty_chars_in_buffer, + .unthrottle = smd_tty_unthrottle, +}; + +static struct tty_driver *smd_tty_driver; + +static int __init smd_tty_init(void) +{ + int ret, i; + + smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS); + if (smd_tty_driver == 0) + return -ENOMEM; + + smd_tty_driver->owner = THIS_MODULE; + smd_tty_driver->driver_name = "smd_tty_driver"; + smd_tty_driver->name = "smd"; + smd_tty_driver->major = 0; + smd_tty_driver->minor_start = 0; + smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + smd_tty_driver->subtype = SERIAL_TYPE_NORMAL; + smd_tty_driver->init_termios = tty_std_termios; + smd_tty_driver->init_termios.c_iflag = 0; + smd_tty_driver->init_termios.c_oflag = 0; + smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + smd_tty_driver->init_termios.c_lflag = 0; + smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(smd_tty_driver, &smd_tty_ops); + + ret = tty_register_driver(smd_tty_driver); + if (ret) + return ret; + + for (i = 0; i < smd_tty_channels_len; i++) { + tty_port_init(&smd_tty[smd_tty_channels[i].id].port); + smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops; + tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0); + } + + return 0; +} + +module_init(smd_tty_init); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 5c7abe4c94dd..6a18ca6ddaa9 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -160,17 +160,17 @@ static int of_platform_serial_remove(struct platform_device *ofdev) * A few common types, add more as needed. */ static struct of_device_id __devinitdata of_platform_serial_table[] = { - { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, - { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, - { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, - { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, - { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, - { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, + { .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .compatible = "ns16850", .data = (void *)PORT_16850, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .type = "serial", .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, + { .compatible = "ibm,qpace-nwp-serial", + .data = (void *)PORT_NWPSERIAL, }, #endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f2f01058789..763537943a53 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -20,6 +20,10 @@ * this driver as required for the omap-platform. */ +#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + #include <linux/module.h> #include <linux/init.h> #include <linux/console.h> @@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status) if (up->port.line == up->port.cons->index) { /* Recover the break flag from console xmit */ lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; } #endif if (lsr & UART_LSR_BI) @@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port) up->ier = UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + up->port_activity = jiffies; return 0; } @@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, - (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); } static void serial_omap_release_port(struct uart_port *port) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 70a61458ec42..a9ad7f33526d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -21,6 +21,7 @@ #include <linux/serial_core.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/dmi.h> #include <linux/dmaengine.h> #include <linux/pch_dma.h> @@ -40,10 +41,11 @@ enum { #define PCH_UART_DRIVER_DEVICE "ttyPCH" -#define PCH_UART_NR_GE_256FIFO 1 -#define PCH_UART_NR_GE_64FIFO 3 -#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) -#define PCH_UART_NR PCH_UART_NR_GE +/* Set the max number of UART port + * Intel EG20T PCH: 4 port + * OKI SEMICONDUCTOR ML7213 IOH: 3 port +*/ +#define PCH_UART_NR 4 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) @@ -192,6 +194,8 @@ enum { #define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) #define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) +#define PCI_VENDOR_ID_ROHM 0x10DB + struct pch_uart_buffer { unsigned char *buf; int size; @@ -215,6 +219,7 @@ struct eg20t_port { struct pch_uart_buffer rxbuf; unsigned int dmsr; unsigned int fcr; + unsigned int mcr; unsigned int use_dma; unsigned int use_dma_flag; struct dma_async_tx_descriptor *desc_tx; @@ -223,13 +228,44 @@ struct eg20t_port { struct pch_dma_slave param_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; - struct scatterlist sg_tx; + struct scatterlist *sg_tx_p; + int nent; struct scatterlist sg_rx; int tx_dma_use; void *rx_buf_virt; dma_addr_t rx_buf_dma; }; +/** + * struct pch_uart_driver_data - private data structure for UART-DMA + * @port_type: The number of DMA channel + * @line_no: UART port line number (0, 1, 2...) + */ +struct pch_uart_driver_data { + int port_type; + int line_no; +}; + +enum pch_uart_num_t { + pch_et20t_uart0 = 0, + pch_et20t_uart1, + pch_et20t_uart2, + pch_et20t_uart3, + pch_ml7213_uart0, + pch_ml7213_uart1, + pch_ml7213_uart2, +}; + +static struct pch_uart_driver_data drv_dat[] = { + [pch_et20t_uart0] = {PCH_UART_8LINE, 0}, + [pch_et20t_uart1] = {PCH_UART_2LINE, 1}, + [pch_et20t_uart2] = {PCH_UART_2LINE, 2}, + [pch_et20t_uart3] = {PCH_UART_2LINE, 3}, + [pch_ml7213_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7213_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, +}; + static unsigned int default_baud = 9600; static const int trigger_level_256[4] = { 1, 64, 128, 224 }; static const int trigger_level_64[4] = { 1, 16, 32, 56 }; @@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, div = DIV_ROUND(priv->base_baud / 16, baud); if (div < 0 || USHRT_MAX <= div) { - pr_err("Invalid Baud(div=0x%x)\n", div); + dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); return -EINVAL; } @@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, dlm = ((unsigned int)div >> 8) & 0x00FFU; if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { - pr_err("Invalid parity(0x%x)\n", parity); + dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity); return -EINVAL; } if (bits & ~PCH_UART_LCR_WLS) { - pr_err("Invalid bits(0x%x)\n", bits); + dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits); return -EINVAL; } if (stb & ~PCH_UART_LCR_STB) { - pr_err("Invalid STB(0x%x)\n", stb); + dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb); return -EINVAL; } @@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, lcr |= bits; lcr |= stb; - pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", __func__, baud, div, lcr, jiffies); iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); iowrite8(dll, priv->membase + PCH_UART_DLL); @@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, unsigned int flag) { if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { - pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); + dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n", + __func__, flag); return -EINVAL; } @@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv, u8 fcr; if (dmamode & ~PCH_UART_FCR_DMS) { - pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); + dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n", + __func__, dmamode); return -EINVAL; } if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { - pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); + dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n", + __func__, fifo_size); return -EINVAL; } if (trigger & ~PCH_UART_FCR_RFTL) { - pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); + dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n", + __func__, trigger); return -EINVAL; } @@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) return get_msr(priv, priv->membase); } -static int pch_uart_hal_write(struct eg20t_port *priv, +static void pch_uart_hal_write(struct eg20t_port *priv, const unsigned char *buf, int tx_size) { int i; @@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv, thr = buf[i++]; iowrite8(thr, priv->membase + PCH_UART_THR); } - return i; } static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, @@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf, port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return -EBUSY; } @@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) struct uart_port *port = &priv->port; if (port->x_char) { - pr_debug("%s:X character send %02x (%lu)\n", __func__, - port->x_char, jiffies); + dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n", + __func__, port->x_char, jiffies); buf[0] = port->x_char; port->x_char = 0; ret = 1; @@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size) port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return 0; } @@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port) /* Set Tx DMA */ param = &priv->param_tx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line; + param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */ + param->tx_reg = port->mapbase + UART_TX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n", + __func__); return; } priv->chan_tx = chan; @@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port) /* Set Rx DMA */ param = &priv->param_rx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ + param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */ + param->rx_reg = port->mapbase + UART_RX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", + __func__); dma_release_channel(priv->chan_tx); return; } @@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct tty_struct *tty = tty_port_tty_get(&port->state->port); + int count; if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return; } - if (dma_push_rx(priv, priv->trigger_level)) + dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE); + count = dma_push_rx(priv, priv->trigger_level); + if (count) tty_flip_buffer_push(tty); - tty_kref_put(tty); + async_tx_ack(priv->desc_rx); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); } static void pch_dma_tx_complete(void *arg) @@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = priv->sg_tx_p; + int i; - xmit->tail += sg_dma_len(&priv->sg_tx); + for (i = 0; i < priv->nent; i++, sg++) { + xmit->tail += sg_dma_len(sg); + port->icount.tx += sg_dma_len(sg); + } xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += sg_dma_len(&priv->sg_tx); - async_tx_ack(priv->desc_tx); + dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE); priv->tx_dma_use = 0; + priv->nent = 0; + kfree(priv->sg_tx_p); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } -static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) +static int pop_tx(struct eg20t_port *priv, int size) { int count = 0; struct uart_port *port = &priv->port; @@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) int cnt_to_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); int sz = min(size - count, cnt_to_end); - memcpy(&buf[count], &xmit->buf[xmit->tail], sz); + pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); count += sz; } while (!uart_circ_empty(xmit) && count < size); pop_tx_end: - pr_debug("%d characters. Remained %d characters. (%lu)\n", + dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", count, size - count, jiffies); return count; @@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ - sg_dma_len(sg) = priv->fifo_size; + sg_dma_len(sg) = priv->trigger_level; sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & @@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv) desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) return 0; @@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - int ret; int fifo_size; int tx_size; int size; int tx_empty; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv) fifo_size--; } size = min(xmit->head - xmit->tail, fifo_size); - tx_size = pop_tx(priv, xmit->buf, size); + if (size < 0) + size = fifo_size; + + tx_size = pop_tx(priv, size); if (tx_size > 0) { - ret = pch_uart_hal_write(priv, xmit->buf, tx_size); - port->icount.tx += ret; + port->icount.tx += tx_size; tx_empty = 0; } priv->tx_empty = tx_empty; - if (tx_empty) + if (tx_empty) { pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + } return PCH_UART_HANDLED_TX_INT; } @@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &priv->sg_tx; + struct scatterlist *sg; int nent; int fifo_size; int tx_empty; struct dma_async_tx_descriptor *desc; + int num; + int i; + int bytes; + int size; + int rem; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) fifo_size--; } - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + if (!bytes) { + dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + return 0; + } + + if (bytes > fifo_size) { + num = bytes / fifo_size + 1; + size = fifo_size; + rem = bytes % fifo_size; + } else { + num = 1; + size = bytes; + rem = bytes; + } + + dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); priv->tx_dma_use = 1; - sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ + priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); - sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), - UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); + sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ + sg = priv->sg_tx_p; - nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); + for (i = 0; i < num; i++, sg++) { + if (i == (num - 1)) + sg_set_page(sg, virt_to_page(xmit->buf), + rem, fifo_size * i); + else + sg_set_page(sg, virt_to_page(xmit->buf), + size, fifo_size * i); + } + + sg = priv->sg_tx_p; + nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); if (!nent) { - pr_err("%s:dma_map_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); return 0; } - - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); + priv->nent = nent; + + for (i = 0; i < nent; i++, sg++) { + sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) + + fifo_size * i; + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + sg->offset; + if (i == (nent - 1)) + sg_dma_len(sg) = rem; + else + sg_dma_len(sg) = size; + } desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + priv->sg_tx_p, nent, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - pr_err("%s:device_prep_slave_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n", + __func__); return 0; } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - + dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); priv->desc_tx = desc; desc->callback = pch_dma_tx_complete; desc->callback_param = priv; @@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) } break; case PCH_UART_IID_RDR: /* Received Data Ready */ - if (priv->use_dma) + if (priv->use_dma) { + pch_uart_hal_disable_interrupt(priv, + PCH_UART_HAL_RX_INT); ret = dma_handle_rx(priv); - else + if (!ret) + pch_uart_hal_enable_interrupt(priv, + PCH_UART_HAL_RX_INT); + } else { ret = handle_rx(priv); + } break; case PCH_UART_IID_RDR_TO: /* Received Data Ready (FIFO Timeout) */ @@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) ret = PCH_UART_HANDLED_MS_INT; break; default: /* Never junp to this label */ - pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); + dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__, + iid, jiffies); ret = -1; break; } @@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port) static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { u32 mcr = 0; - unsigned int dat; struct eg20t_port *priv = container_of(port, struct eg20t_port, port); if (mctrl & TIOCM_DTR) @@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); } static void pch_uart_stop_tx(struct uart_port *port) @@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); - if (priv->use_dma) - if (priv->tx_dma_use) + if (priv->use_dma) { + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n", + __func__); return; + } + } priv->start_tx = 1; pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); @@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); priv->tx_empty = 1; - port->uartclk = priv->base_baud; + + if (port->uartclk) + priv->base_baud = port->uartclk; + else + port->uartclk = priv->base_baud; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); ret = pch_uart_hal_set_line(priv, default_baud, PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, @@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port) ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); if (ret) - pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + dev_err(priv->port.dev, + "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); if (priv->use_dma_flag) pch_free_dma(port); @@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port, } else { parity = PCH_UART_HAL_PARITY_NONE; } + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); @@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port, priv = container_of(port, struct eg20t_port, port); if (serinfo->flags & UPF_LOW_LATENCY) { - pr_info("PCH UART : Use PIO Mode (without DMA)\n"); + dev_info(priv->port.dev, + "PCH UART : Use PIO Mode (without DMA)\n"); priv->use_dma = 0; serinfo->flags &= ~UPF_LOW_LATENCY; } else { #ifndef CONFIG_PCH_DMA - pr_err("%s : PCH DMA is not Loaded.\n", __func__); + dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n", + __func__); return -EOPNOTSUPP; #endif priv->use_dma = 1; priv->use_dma_flag = 1; - pr_info("PCH UART : Use DMA Mode\n"); + dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n"); } return 0; @@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = { }; static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, - int port_type) + const struct pci_device_id *id) { struct eg20t_port *priv; int ret; @@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned int mapbase; unsigned char *rxbuf; int fifosize, base_baud; - static int num; + int port_type; + struct pch_uart_driver_data *board; + + board = &drv_dat[id->driver_data]; + port_type = board->port_type; priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); if (priv == NULL) @@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; + base_baud = 1843200; /* 1.8432MHz */ + + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + base_baud = 192000000; /* 192.0MHz */ + switch (port_type) { case PORT_UNKNOWN: - fifosize = 256; /* UART0 */ - base_baud = 1843200; /* 1.8432MHz */ + fifosize = 256; /* EG20T/ML7213: UART0 */ break; case PORT_8250: - fifosize = 64; /* UART1~3 */ - base_baud = 1843200; /* 1.8432MHz */ + fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ break; default: dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); @@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->port.ops = &pch_uart_ops; priv->port.flags = UPF_BOOT_AUTOCONF; priv->port.fifosize = fifosize; - priv->port.line = num++; + priv->port.line = board->line_no; priv->trigger = PCH_UART_HAL_TRIGGER_M; + spin_lock_init(&priv->port.lock); + pci_set_drvdata(pdev, priv); pch_uart_hal_request(pdev, fifosize, base_baud); + ret = uart_add_one_port(&pch_uart_driver, &priv->port); if (ret < 0) goto init_port_hal_free; @@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), - .driver_data = PCH_UART_8LINE}, + .driver_data = pch_et20t_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart1}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart2}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart3}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), + .driver_data = pch_ml7213_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), + .driver_data = pch_ml7213_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), + .driver_data = pch_ml7213_uart2}, {0,}, }; @@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, if (ret < 0) goto probe_error; - priv = pch_uart_init_port(pdev, id->driver_data); + priv = pch_uart_init_port(pdev, id); if (!priv) { ret = -EBUSY; goto probe_disable_device; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 460a72d91bb7..733fe8e73f0f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty, return put_user(result, value); } -static int uart_tiocmget(struct tty_struct *tty, struct file *file) +static int uart_tiocmget(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct tty_port *port = &state->port; @@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) int result = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { result = uport->mctrl; - spin_lock_irq(&uport->lock); result |= uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); @@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) } static int -uart_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct uart_state *state = tty->driver_data; struct uart_port *uport = state->uart_port; @@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file, int ret = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { uart_update_mctrl(uport, set, clear); ret = 0; } @@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty, * Called via sys_ioctl. We can use spin_lock_irq() here. */ static int -uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, +uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct uart_state *state = tty->driver_data; @@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, mutex_lock(&port->mutex); - if (tty_hung_up_p(filp)) { + if (tty->flags & (1 << TTY_IO_ERROR)) { ret = -EIO; goto out_up; } @@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) /* * Re-enable the console device after suspending. */ - if (console_suspend_enabled && uart_console(uport)) { + if (uart_console(uport)) { /* * First try to use the console cflag setting. */ @@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (port->tty && port->tty->termios && termios.c_cflag == 0) termios = *(port->tty->termios); - uart_change_pm(state, 0); uport->ops->set_termios(uport, &termios, NULL); - console_start(uport->cons); + if (console_suspend_enabled) + console_start(uport->cons); } if (port->flags & ASYNC_SUSPENDED) { diff --git a/drivers/char/synclink.c b/drivers/tty/synclink.c index 3a6824f12be2..18888d005a0a 100644 --- a/drivers/char/synclink.c +++ b/drivers/tty/synclink.c @@ -823,8 +823,8 @@ static isr_dispatch_func UscIsrTable[7] = /* * ioctl call handlers */ -static int tiocmget(struct tty_struct *tty, struct file *file); -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount); @@ -2846,7 +2846,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { struct mgsl_struct *info = tty->driver_data; unsigned int result; @@ -2871,8 +2871,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct mgsl_struct *info = tty->driver_data; unsigned long flags; @@ -2962,13 +2962,12 @@ static int msgl_get_icount(struct tty_struct *tty, * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int mgsl_ioctl(struct tty_struct *tty, struct file * file, +static int mgsl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct mgsl_struct * info = tty->driver_data; diff --git a/drivers/char/synclink_gt.c b/drivers/tty/synclink_gt.c index d01fffeac951..a35dd549a008 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -154,7 +154,7 @@ static void flush_buffer(struct tty_struct *tty); static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int chars_in_buffer(struct tty_struct *tty); static void throttle(struct tty_struct * tty); static void unthrottle(struct tty_struct * tty); @@ -512,9 +512,9 @@ static int tx_abort(struct slgt_info *info); static int rx_enable(struct slgt_info *info, int enable); static int modem_input_wait(struct slgt_info *info,int arg); static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty, struct file *file); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); static int get_interface(struct slgt_info *info, int __user *if_mode); static int set_interface(struct slgt_info *info, int if_mode); @@ -1030,13 +1030,12 @@ static void tx_release(struct tty_struct *tty) * Arguments * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return 0 if success, otherwise error code */ -static int ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; @@ -1200,7 +1199,7 @@ static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *ne return 0; } -static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, +static long slgt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; @@ -1239,7 +1238,7 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file, case MGSL_IOCSIF: case MGSL_IOCSXSYNC: case MGSL_IOCSXCTRL: - rc = ioctl(tty, file, cmd, arg); + rc = ioctl(tty, cmd, arg); break; } @@ -3195,7 +3194,7 @@ static int modem_input_wait(struct slgt_info *info,int arg) /* * return state of serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { struct slgt_info *info = tty->driver_data; unsigned int result; @@ -3223,7 +3222,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file) * TIOCMSET = set/clear signal values * value bit mask for command */ -static int tiocmset(struct tty_struct *tty, struct file *file, +static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct slgt_info *info = tty->driver_data; diff --git a/drivers/char/synclinkmp.c b/drivers/tty/synclinkmp.c index 2f9eb4b0dec1..327343694473 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -520,7 +520,7 @@ static void flush_buffer(struct tty_struct *tty); static void tx_hold(struct tty_struct *tty); static void tx_release(struct tty_struct *tty); -static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int chars_in_buffer(struct tty_struct *tty); static void throttle(struct tty_struct * tty); static void unthrottle(struct tty_struct * tty); @@ -546,9 +546,9 @@ static int tx_abort(SLMP_INFO *info); static int rx_enable(SLMP_INFO *info, int enable); static int modem_input_wait(SLMP_INFO *info,int arg); static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty, struct file *file); -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int tiocmget(struct tty_struct *tty); +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); static int set_break(struct tty_struct *tty, int break_state); static void add_device(SLMP_INFO *info); @@ -1248,13 +1248,12 @@ static void tx_release(struct tty_struct *tty) * Arguments: * * tty pointer to tty instance data - * file pointer to associated file object for device * cmd IOCTL command code * arg command argument/context * * Return Value: 0 if success, otherwise error code */ -static int ioctl(struct tty_struct *tty, struct file *file, +static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { SLMP_INFO *info = tty->driver_data; @@ -3207,7 +3206,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg) /* return the state of the serial control and status signals */ -static int tiocmget(struct tty_struct *tty, struct file *file) +static int tiocmget(struct tty_struct *tty) { SLMP_INFO *info = tty->driver_data; unsigned int result; @@ -3232,8 +3231,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file) /* set modem control signals (DTR/RTS) */ -static int tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { SLMP_INFO *info = tty->driver_data; unsigned long flags; diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index f64582b0f623..7c5866920622 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -95,8 +95,10 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid, { if (buf->valid == 0) return; - if (audit_enabled == 0) + if (audit_enabled == 0) { + buf->valid = 0; return; + } tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor, buf->data, buf->valid); buf->valid = 0; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 0065da4b11c1..8ef2d69470ec 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2465,12 +2465,12 @@ out: * Locking: none (up to the driver) */ -static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p) +static int tty_tiocmget(struct tty_struct *tty, int __user *p) { int retval = -EINVAL; if (tty->ops->tiocmget) { - retval = tty->ops->tiocmget(tty, file); + retval = tty->ops->tiocmget(tty); if (retval >= 0) retval = put_user(retval, p); @@ -2481,7 +2481,6 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p /** * tty_tiocmset - set modem status * @tty: tty device - * @file: user file pointer * @cmd: command - clear bits, set bits or set all * @p: pointer to desired bits * @@ -2491,7 +2490,7 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p * Locking: none (up to the driver) */ -static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd, +static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd, unsigned __user *p) { int retval; @@ -2518,7 +2517,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int } set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP; - return tty->ops->tiocmset(tty, file, set, clear); + return tty->ops->tiocmset(tty, set, clear); } static int tty_tiocgicount(struct tty_struct *tty, void __user *arg) @@ -2627,6 +2626,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return put_user(tty->ldisc->ops->num, (int __user *)p); case TIOCSETD: return tiocsetd(tty, p); + case TIOCVHANGUP: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + tty_vhangup(tty); + return 0; case TIOCGDEV: { unsigned int ret = new_encode_dev(tty_devnum(real_tty)); @@ -2655,11 +2659,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return send_break(tty, arg ? arg*100 : 250); case TIOCMGET: - return tty_tiocmget(tty, file, p); + return tty_tiocmget(tty, p); case TIOCMSET: case TIOCMBIC: case TIOCMBIS: - return tty_tiocmset(tty, file, cmd, p); + return tty_tiocmset(tty, cmd, p); case TIOCGICOUNT: retval = tty_tiocgicount(tty, p); /* For the moment allow fall through to the old method */ @@ -2677,7 +2681,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } if (tty->ops->ioctl) { - retval = (tty->ops->ioctl)(tty, file, cmd, arg); + retval = (tty->ops->ioctl)(tty, cmd, arg); if (retval != -ENOIOCTLCMD) return retval; } @@ -2705,7 +2709,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd, return -EINVAL; if (tty->ops->compat_ioctl) { - retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg); + retval = (tty->ops->compat_ioctl)(tty, cmd, arg); if (retval != -ENOIOCTLCMD) return retval; } diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 0c1889971459..1a1135d580a2 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -486,7 +486,7 @@ int tty_termios_hw_change(struct ktermios *a, struct ktermios *b) EXPORT_SYMBOL(tty_termios_hw_change); /** - * change_termios - update termios values + * tty_set_termios - update termios values * @tty: tty to update * @new_termios: desired new value * @@ -497,7 +497,7 @@ EXPORT_SYMBOL(tty_termios_hw_change); * Locking: termios_mutex */ -static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) +int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) { struct ktermios old_termios; struct tty_ldisc *ld; @@ -553,7 +553,9 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) tty_ldisc_deref(ld); } mutex_unlock(&tty->termios_mutex); + return 0; } +EXPORT_SYMBOL_GPL(tty_set_termios); /** * set_termios - set termios values for a tty @@ -562,7 +564,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios) * @opt: option information * * Helper function to prepare termios data and run necessary other - * functions before using change_termios to do the actual changes. + * functions before using tty_set_termios to do the actual changes. * * Locking: * Called functions take ldisc and termios_mutex locks @@ -620,7 +622,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return -EINTR; } - change_termios(tty, &tmp_termios); + tty_set_termios(tty, &tmp_termios); /* FIXME: Arguably if tmp_termios == tty->termios AND the actual requested termios was not tmp_termios then we may @@ -797,7 +799,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb) termios.c_ospeed); #endif mutex_unlock(&tty->termios_mutex); - change_termios(tty, &termios); + tty_set_termios(tty, &termios); return 0; } #endif @@ -951,6 +953,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, int ret = 0; struct ktermios kterm; + BUG_ON(file == NULL); + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) real_tty = tty->link; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 4214d58276f7..c42f402db9ba 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -535,6 +535,19 @@ static int tty_ldisc_halt(struct tty_struct *tty) } /** + * tty_ldisc_flush_works - flush all works of a tty + * @tty: tty device to flush works for + * + * Sync flush all works belonging to @tty. + */ +static void tty_ldisc_flush_works(struct tty_struct *tty) +{ + flush_work_sync(&tty->hangup_work); + flush_work_sync(&tty->SAK_work); + flush_delayed_work_sync(&tty->buf.work); +} + +/** * tty_ldisc_wait_idle - wait for the ldisc to become idle * @tty: tty to wait for * @@ -653,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) mutex_unlock(&tty->ldisc_mutex); - flush_scheduled_work(); + tty_ldisc_flush_works(tty); retval = tty_ldisc_wait_idle(tty); @@ -905,7 +918,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) tty_unlock(); tty_ldisc_halt(tty); - flush_scheduled_work(); + tty_ldisc_flush_works(tty); tty_lock(); mutex_lock(&tty->ldisc_mutex); diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index e95d7876ca6b..6dd3c68c13ad 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -654,7 +654,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag) if (value >= ARRAY_SIZE(fn_handler)) return; if ((kbd->kbdmode == VC_RAW || - kbd->kbdmode == VC_MEDIUMRAW) && + kbd->kbdmode == VC_MEDIUMRAW || + kbd->kbdmode == VC_OFF) && value != KVAL(K_SAK)) return; /* SAK is allowed even in raw mode */ fn_handler[value](vc); @@ -1295,7 +1296,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (rc == NOTIFY_STOP) return; - if (raw_mode && type != KT_SPEC && type != KT_SHIFT) + if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT) return; (*k_handler[type])(vc, keysym & 0xff, !down); diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index a672ed192d33..7b3bfbe2e6de 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -28,7 +28,6 @@ #include <linux/interrupt.h> #include <linux/mm.h> #include <linux/init.h> -#include <linux/mutex.h> #include <linux/vt_kern.h> #include <linux/selection.h> #include <linux/kbd_kern.h> @@ -51,6 +50,8 @@ #undef addr #define HEADER_SIZE 4 +#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE) + struct vcs_poll_data { struct notifier_block notifier; unsigned int cons_num; @@ -131,21 +132,45 @@ vcs_poll_data_get(struct file *file) return poll; } +/* + * Returns VC for inode. + * Must be called with console_lock. + */ +static struct vc_data* +vcs_vc(struct inode *inode, int *viewed) +{ + unsigned int currcons = iminor(inode) & 127; + + WARN_CONSOLE_UNLOCKED(); + + if (currcons == 0) { + currcons = fg_console; + if (viewed) + *viewed = 1; + } else { + currcons--; + if (viewed) + *viewed = 0; + } + return vc_cons[currcons].d; +} + +/* + * Returns size for VC carried by inode. + * Must be called with console_lock. + */ static int vcs_size(struct inode *inode) { int size; int minor = iminor(inode); - int currcons = minor & 127; struct vc_data *vc; - if (currcons == 0) - currcons = fg_console; - else - currcons--; - if (!vc_cons_allocated(currcons)) + WARN_CONSOLE_UNLOCKED(); + + vc = vcs_vc(inode, NULL); + if (!vc) return -ENXIO; - vc = vc_cons[currcons].d; size = vc->vc_rows * vc->vc_cols; @@ -158,11 +183,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) { int size; - mutex_lock(&con_buf_mtx); + console_lock(); size = vcs_size(file->f_path.dentry->d_inode); + console_unlock(); + if (size < 0) + return size; switch (orig) { default: - mutex_unlock(&con_buf_mtx); return -EINVAL; case 2: offset += size; @@ -173,11 +200,9 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) break; } if (offset < 0 || offset > size) { - mutex_unlock(&con_buf_mtx); return -EINVAL; } file->f_pos = offset; - mutex_unlock(&con_buf_mtx); return file->f_pos; } @@ -190,12 +215,15 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) struct vc_data *vc; struct vcs_poll_data *poll; long pos; - long viewed, attr, read; - int col, maxcol; + long attr, read; + int col, maxcol, viewed; unsigned short *org = NULL; ssize_t ret; + char *con_buf; - mutex_lock(&con_buf_mtx); + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; pos = *ppos; @@ -205,18 +233,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) console_lock(); attr = (currcons & 128); - currcons = (currcons & 127); - if (currcons == 0) { - currcons = fg_console; - viewed = 1; - } else { - currcons--; - viewed = 0; - } ret = -ENXIO; - if (!vc_cons_allocated(currcons)) + vc = vcs_vc(inode, &viewed); + if (!vc) goto unlock_out; - vc = vc_cons[currcons].d; ret = -EINVAL; if (pos < 0) @@ -237,6 +257,12 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) * could sleep. */ size = vcs_size(inode); + if (size < 0) { + if (read) + break; + ret = size; + goto unlock_out; + } if (pos >= size) break; if (count > size - pos) @@ -355,7 +381,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) ret = read; unlock_out: console_unlock(); - mutex_unlock(&con_buf_mtx); + free_page((unsigned long) con_buf); return ret; } @@ -366,13 +392,16 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) unsigned int currcons = iminor(inode); struct vc_data *vc; long pos; - long viewed, attr, size, written; + long attr, size, written; char *con_buf0; - int col, maxcol; + int col, maxcol, viewed; u16 *org0 = NULL, *org = NULL; size_t ret; + char *con_buf; - mutex_lock(&con_buf_mtx); + con_buf = (char *) __get_free_page(GFP_KERNEL); + if (!con_buf) + return -ENOMEM; pos = *ppos; @@ -382,19 +411,10 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) console_lock(); attr = (currcons & 128); - currcons = (currcons & 127); - - if (currcons == 0) { - currcons = fg_console; - viewed = 1; - } else { - currcons--; - viewed = 0; - } ret = -ENXIO; - if (!vc_cons_allocated(currcons)) + vc = vcs_vc(inode, &viewed); + if (!vc) goto unlock_out; - vc = vc_cons[currcons].d; size = vcs_size(inode); ret = -EINVAL; @@ -436,6 +456,12 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) * Return data written up to now on failure. */ size = vcs_size(inode); + if (size < 0) { + if (written) + break; + ret = size; + goto unlock_out; + } if (pos >= size) break; if (this_round > size - pos) @@ -543,9 +569,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) unlock_out: console_unlock(); - - mutex_unlock(&con_buf_mtx); - + free_page((unsigned long) con_buf); return ret; } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 147ede3423df..798df6f89110 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2068,18 +2068,6 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) } } -/* This is a temporary buffer used to prepare a tty console write - * so that we can easily avoid touching user space while holding the - * console spinlock. It is allocated in con_init and is shared by - * this code and the vc_screen read/write tty calls. - * - * We have to allocate this statically in the kernel data section - * since console_init (and thus con_init) are called before any - * kernel memory allocation is available. - */ -char con_buf[CON_BUF_SIZE]; -DEFINE_MUTEX(con_buf_mtx); - /* is_double_width() is based on the wcwidth() implementation by * Markus Kuhn -- 2007-05-26 (Unicode 5.0) * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c @@ -2157,10 +2145,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co currcons = vc->vc_num; if (!vc_cons_allocated(currcons)) { - /* could this happen? */ - printk_once("con_write: tty %d not allocated\n", currcons+1); - console_unlock(); - return 0; + /* could this happen? */ + pr_warn_once("con_write: tty %d not allocated\n", currcons+1); + console_unlock(); + return 0; } himask = vc->vc_hi_font_mask; @@ -2940,7 +2928,7 @@ static int __init con_init(void) gotoxy(vc, vc->vc_x, vc->vc_y); csi_J(vc, 0); update_screen(vc); - printk("Console: %s %s %dx%d", + pr_info("Console: %s %s %dx%d", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); printable = 1; @@ -3103,7 +3091,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, clear_buffer_attributes(vc); } - printk("Console: switching "); + pr_info("Console: switching "); if (!deflt) printk("consoles %d-%d ", first+1, last+1); if (j >= 0) { @@ -3809,7 +3797,8 @@ void do_unblank_screen(int leaving_gfx) return; if (!vc_cons_allocated(fg_console)) { /* impossible */ - printk("unblank_screen: tty %d not allocated ??\n", fg_console+1); + pr_warning("unblank_screen: tty %d not allocated ??\n", + fg_console+1); return; } vc = vc_cons[fg_console].d; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 1235ebda6e1c..b64804965316 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -495,7 +495,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ * We handle the console-specific ioctl's here. We allow the * capability to modify any console, not just the fg_console. */ -int vt_ioctl(struct tty_struct *tty, struct file * file, +int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct vc_data *vc = tty->driver_data; @@ -688,6 +688,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, kbd->kbdmode = VC_UNICODE; compute_shiftstate(); break; + case K_OFF: + kbd->kbdmode = VC_OFF; + break; default: ret = -EINVAL; goto out; @@ -1007,8 +1010,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, if (ret) break; /* Commence switch and lock */ - set_console(arg); + set_console(vsa.console); } + break; } /* @@ -1491,7 +1495,7 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud, return 0; } -long vt_compat_ioctl(struct tty_struct *tty, struct file * file, +long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct vc_data *vc = tty->driver_data; @@ -1577,7 +1581,7 @@ out: fallback: tty_unlock(); - return vt_ioctl(tty, file, cmd, arg); + return vt_ioctl(tty, cmd, arg); } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4ab49d4eebf4..f492a7f2b6ee 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -776,7 +776,7 @@ static int acm_tty_break_ctl(struct tty_struct *tty, int state) return retval; } -static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file) +static int acm_tty_tiocmget(struct tty_struct *tty) { struct acm *acm = tty->driver_data; @@ -791,7 +791,7 @@ static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file) TIOCM_CTS; } -static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, +static int acm_tty_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct acm *acm = tty->driver_data; @@ -813,7 +813,7 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return acm_set_control(acm, acm->ctrlout = newctrl); } -static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, +static int acm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct acm *acm = tty->driver_data; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 8f1d4fb19d24..5cdb9d912275 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -431,7 +431,7 @@ static int ark3116_get_icount(struct tty_struct *tty, return 0; } -static int ark3116_ioctl(struct tty_struct *tty, struct file *file, +static int ark3116_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -485,7 +485,7 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int ark3116_tiocmget(struct tty_struct *tty, struct file *file) +static int ark3116_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ark3116_private *priv = usb_get_serial_port_data(port); @@ -511,7 +511,7 @@ static int ark3116_tiocmget(struct tty_struct *tty, struct file *file) (ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0); } -static int ark3116_tiocmset(struct tty_struct *tty, struct file *file, +static int ark3116_tiocmset(struct tty_struct *tty, unsigned set, unsigned clr) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 36df35295db2..d6921fa1403c 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -100,8 +100,8 @@ static void belkin_sa_process_read_urb(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); -static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file); -static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, +static int belkin_sa_tiocmget(struct tty_struct *tty); +static int belkin_sa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); @@ -497,7 +497,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "Set break_ctl %d\n", break_state); } -static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file) +static int belkin_sa_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct belkin_sa_private *priv = usb_get_serial_port_data(port); @@ -513,7 +513,7 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file) return control_state; } -static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, +static int belkin_sa_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 14ac87ee9251..6ae1c0688b5e 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -432,7 +432,7 @@ out: kfree(break_reg); } -static int ch341_tiocmset(struct tty_struct *tty, struct file *file, +static int ch341_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -553,8 +553,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ -static int ch341_ioctl(struct tty_struct *tty, struct file *file, +static int ch341_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -573,7 +572,7 @@ static int ch341_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int ch341_tiocmget(struct tty_struct *tty, struct file *file) +static int ch341_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 735ea03157ab..4df3e0cecbae 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -41,10 +41,9 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); -static int cp210x_tiocmget(struct tty_struct *, struct file *); -static int cp210x_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, +static int cp210x_tiocmget(struct tty_struct *); +static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); +static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int, unsigned int); static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); @@ -698,14 +697,14 @@ static void cp210x_set_termios(struct tty_struct *tty, } -static int cp210x_tiocmset (struct tty_struct *tty, struct file *file, +static int cp210x_tiocmset (struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - return cp210x_tiocmset_port(port, file, set, clear); + return cp210x_tiocmset_port(port, set, clear); } -static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, +static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { unsigned int control = 0; @@ -737,12 +736,12 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, static void cp210x_dtr_rts(struct usb_serial_port *p, int on) { if (on) - cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0); + cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0); else - cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); + cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); } -static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) +static int cp210x_tiocmget (struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int control; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 2edf238b00b9..987e9bf7bd02 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -169,12 +169,12 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); static int cypress_write_room(struct tty_struct *tty); -static int cypress_ioctl(struct tty_struct *tty, struct file *file, +static int cypress_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int cypress_tiocmget(struct tty_struct *tty, struct file *file); -static int cypress_tiocmset(struct tty_struct *tty, struct file *file, +static int cypress_tiocmget(struct tty_struct *tty); +static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int cypress_chars_in_buffer(struct tty_struct *tty); static void cypress_throttle(struct tty_struct *tty); @@ -864,7 +864,7 @@ static int cypress_write_room(struct tty_struct *tty) } -static int cypress_tiocmget(struct tty_struct *tty, struct file *file) +static int cypress_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); @@ -892,7 +892,7 @@ static int cypress_tiocmget(struct tty_struct *tty, struct file *file) } -static int cypress_tiocmset(struct tty_struct *tty, struct file *file, +static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -917,7 +917,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file, } -static int cypress_ioctl(struct tty_struct *tty, struct file *file, +static int cypress_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 666e5a6edd82..86fbba6336c9 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -445,11 +445,11 @@ static void digi_rx_unthrottle(struct tty_struct *tty); static void digi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static void digi_break_ctl(struct tty_struct *tty, int break_state); -static int digi_tiocmget(struct tty_struct *tty, struct file *file); -static int digi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); +static int digi_tiocmget(struct tty_struct *tty); +static int digi_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear); static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); + const unsigned char *buf, int count); static void digi_write_bulk_callback(struct urb *urb); static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); @@ -1118,7 +1118,7 @@ static void digi_break_ctl(struct tty_struct *tty, int break_state) } -static int digi_tiocmget(struct tty_struct *tty, struct file *file) +static int digi_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); @@ -1134,8 +1134,8 @@ static int digi_tiocmget(struct tty_struct *tty, struct file *file) } -static int digi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int digi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a75f9298d88f..65967b36365f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -866,10 +866,10 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int ftdi_tiocmget(struct tty_struct *tty, struct file *file); -static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, +static int ftdi_tiocmget(struct tty_struct *tty); +static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int ftdi_ioctl(struct tty_struct *tty, struct file *file, +static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -2178,7 +2178,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } } -static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) +static int ftdi_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -2231,7 +2231,7 @@ out: return ret; } -static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, +static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -2239,7 +2239,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, return update_mctrl(port, set, clear); } -static int ftdi_ioctl(struct tty_struct *tty, struct file *file, +static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 76e3e502c23d..f1aedfa7c420 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -216,11 +216,11 @@ static void edge_unthrottle(struct tty_struct *tty); static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void edge_break(struct tty_struct *tty, int break_state); -static int edge_tiocmget(struct tty_struct *tty, struct file *file); -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmget(struct tty_struct *tty); +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int edge_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); @@ -1568,7 +1568,7 @@ static int get_lsr_info(struct edgeport_port *edge_port, return 0; } -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -1599,7 +1599,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int edge_tiocmget(struct tty_struct *tty, struct file *file) +static int edge_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); @@ -1679,7 +1679,7 @@ static int get_serial_info(struct edgeport_port *edge_port, * SerialIoctl * this function handles any ioctl calls to the driver *****************************************************************************/ -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 22506b095c4f..d8434910fa7b 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2444,7 +2444,7 @@ static void edge_set_termios(struct tty_struct *tty, change_port_settings(tty, edge_port, old_termios); } -static int edge_tiocmset(struct tty_struct *tty, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -2477,7 +2477,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int edge_tiocmget(struct tty_struct *tty, struct file *file) +static int edge_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); @@ -2552,7 +2552,7 @@ static int get_serial_info(struct edgeport_port *edge_port, return 0; } -static int edge_ioctl(struct tty_struct *tty, struct file *file, +static int edge_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 99b97c04896f..6aca631a407a 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -150,7 +150,7 @@ static void iuu_release(struct usb_serial *serial) } } -static int iuu_tiocmset(struct tty_struct *tty, struct file *file, +static int iuu_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -179,7 +179,7 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file, * When no card , the reader respond with TIOCM_CD * This is known as CD autodetect mechanism */ -static int iuu_tiocmget(struct tty_struct *tty, struct file *file) +static int iuu_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct iuu_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 67f41b526570..a442352d7b61 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -301,7 +301,7 @@ static void keyspan_set_termios(struct tty_struct *tty, keyspan_send_setup(port, 0); } -static int keyspan_tiocmget(struct tty_struct *tty, struct file *file) +static int keyspan_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); @@ -317,7 +317,7 @@ static int keyspan_tiocmget(struct tty_struct *tty, struct file *file) return value; } -static int keyspan_tiocmset(struct tty_struct *tty, struct file *file, +static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index ce134dc28ddf..13fa1d1cc900 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -58,10 +58,9 @@ static void keyspan_set_termios (struct tty_struct *tty, struct ktermios *old); static void keyspan_break_ctl (struct tty_struct *tty, int break_state); -static int keyspan_tiocmget (struct tty_struct *tty, - struct file *file); +static int keyspan_tiocmget (struct tty_struct *tty); static int keyspan_tiocmset (struct tty_struct *tty, - struct file *file, unsigned int set, + unsigned int set, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 7b690f3282a2..d5c0c6ab4966 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -458,7 +458,7 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial, return rc; } -static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file) +static int keyspan_pda_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; @@ -479,7 +479,7 @@ static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file) return value; } -static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file, +static int keyspan_pda_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index e8a65ce45a2f..19373cb7c5bf 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -68,8 +68,8 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file); -static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, +static int klsi_105_tiocmget(struct tty_struct *tty); +static int klsi_105_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void klsi_105_process_read_urb(struct urb *urb); static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, @@ -637,7 +637,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) } #endif -static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) +static int klsi_105_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct klsi_105_private *priv = usb_get_serial_port_data(port); @@ -661,7 +661,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) return (int)line_state; } -static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, +static int klsi_105_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { int retval = -EINVAL; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index b382d9a0274d..ddd146300ddb 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -75,10 +75,10 @@ static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int kobil_write_room(struct tty_struct *tty); -static int kobil_ioctl(struct tty_struct *tty, struct file *file, +static int kobil_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int kobil_tiocmget(struct tty_struct *tty, struct file *file); -static int kobil_tiocmset(struct tty_struct *tty, struct file *file, +static int kobil_tiocmget(struct tty_struct *tty); +static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void kobil_read_int_callback(struct urb *urb); static void kobil_write_callback(struct urb *purb); @@ -504,7 +504,7 @@ static int kobil_write_room(struct tty_struct *tty) } -static int kobil_tiocmget(struct tty_struct *tty, struct file *file) +static int kobil_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct kobil_private *priv; @@ -544,7 +544,7 @@ static int kobil_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int kobil_tiocmset(struct tty_struct *tty, struct file *file, +static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -668,7 +668,7 @@ static void kobil_set_termios(struct tty_struct *tty, ); } -static int kobil_ioctl(struct tty_struct *tty, struct file *file, +static int kobil_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 1e225aacf46e..d2c019637e45 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -103,8 +103,8 @@ static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); -static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file); -static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, +static int mct_u232_tiocmget(struct tty_struct *tty); +static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int mct_u232_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); @@ -790,7 +790,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) } /* mct_u232_break_ctl */ -static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file) +static int mct_u232_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); @@ -806,7 +806,7 @@ static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file) return control_state; } -static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, +static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index ae506f4ee29d..40abedbc5943 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1833,7 +1833,7 @@ static int get_lsr_info(struct tty_struct *tty, return 0; } -static int mos7720_tiocmget(struct tty_struct *tty, struct file *file) +static int mos7720_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); @@ -1858,14 +1858,14 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int mos7720_tiocmset(struct tty_struct *tty, struct file *file, +static int mos7720_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; dbg("%s - port %d", __func__, port->number); - dbg("he was at tiocmget"); + dbg("he was at tiocmset"); mcr = mos7720_port->shadowMCR; @@ -1987,7 +1987,7 @@ static int get_serial_info(struct moschip_port *mos7720_port, return 0; } -static int mos7720_ioctl(struct tty_struct *tty, struct file *file, +static int mos7720_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 5627993f9e41..7b50aa122752 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1644,7 +1644,7 @@ static void mos7840_unthrottle(struct tty_struct *tty) } } -static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) +static int mos7840_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7840_port; @@ -1674,7 +1674,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int mos7840_tiocmset(struct tty_struct *tty, struct file *file, +static int mos7840_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -2235,7 +2235,7 @@ static int mos7840_get_icount(struct tty_struct *tty, * this function handles any ioctl calls to the driver *****************************************************************************/ -static int mos7840_ioctl(struct tty_struct *tty, struct file *file, +static int mos7840_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index ce82396fc4e8..201f6096844b 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -391,7 +391,7 @@ static void opticon_unthrottle(struct tty_struct *tty) } } -static int opticon_tiocmget(struct tty_struct *tty, struct file *file) +static int opticon_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct opticon_private *priv = usb_get_serial_data(port->serial); @@ -468,7 +468,7 @@ static int get_serial_info(struct opticon_private *priv, return 0; } -static int opticon_ioctl(struct tty_struct *tty, struct file *file, +static int opticon_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 73613205be7a..4c29e6c2bda7 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -135,7 +135,7 @@ static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void oti6858_init_termios(struct tty_struct *tty); -static int oti6858_ioctl(struct tty_struct *tty, struct file *file, +static int oti6858_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); @@ -144,8 +144,8 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int oti6858_write_room(struct tty_struct *tty); static int oti6858_chars_in_buffer(struct tty_struct *tty); -static int oti6858_tiocmget(struct tty_struct *tty, struct file *file); -static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, +static int oti6858_tiocmget(struct tty_struct *tty); +static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int oti6858_startup(struct usb_serial *serial); static void oti6858_release(struct usb_serial *serial); @@ -624,7 +624,7 @@ static void oti6858_close(struct usb_serial_port *port) usb_kill_urb(port->interrupt_in_urb); } -static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, +static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -657,7 +657,7 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static int oti6858_tiocmget(struct tty_struct *tty, struct file *file) +static int oti6858_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); @@ -728,7 +728,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int oti6858_ioctl(struct tty_struct *tty, struct file *file, +static int oti6858_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 08c9181b8e48..30461fcc2206 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -505,7 +505,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) return 0; } -static int pl2303_tiocmset(struct tty_struct *tty, struct file *file, +static int pl2303_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -531,7 +531,7 @@ static int pl2303_tiocmset(struct tty_struct *tty, struct file *file, return set_control_lines(port->serial->dev, control); } -static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) +static int pl2303_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -606,7 +606,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int pl2303_ioctl(struct tty_struct *tty, struct file *file, +static int pl2303_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct serial_struct ser; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 5b88b6836a81..d5d136a53b61 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -395,7 +395,7 @@ static void sierra_set_termios(struct tty_struct *tty, sierra_send_setup(port); } -static int sierra_tiocmget(struct tty_struct *tty, struct file *file) +static int sierra_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int value; @@ -414,7 +414,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file) return value; } -static int sierra_tiocmset(struct tty_struct *tty, struct file *file, +static int sierra_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index cbfb70bffdd0..180ea6c7911c 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -576,7 +576,7 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port, return 0; } -static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, +static int spcp8x5_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -595,7 +595,7 @@ static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, return -ENOIOCTLCMD; } -static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, +static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -618,7 +618,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } -static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file) +static int spcp8x5_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 8359ec798959..87362e48796e 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -439,7 +439,7 @@ static int ssu100_get_icount(struct tty_struct *tty, -static int ssu100_ioctl(struct tty_struct *tty, struct file *file, +static int ssu100_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -484,7 +484,7 @@ static int ssu100_attach(struct usb_serial *serial) return ssu100_initdevice(serial->dev); } -static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) +static int ssu100_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_device *dev = port->serial->dev; @@ -517,7 +517,7 @@ mget_out: return r; } -static int ssu100_tiocmset(struct tty_struct *tty, struct file *file, +static int ssu100_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a910004f4079..c6d92a530086 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -106,14 +106,14 @@ static int ti_write_room(struct tty_struct *tty); static int ti_chars_in_buffer(struct tty_struct *tty); static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); -static int ti_ioctl(struct tty_struct *tty, struct file *file, +static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static int ti_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static int ti_tiocmget(struct tty_struct *tty, struct file *file); -static int ti_tiocmset(struct tty_struct *tty, struct file *file, +static int ti_tiocmget(struct tty_struct *tty); +static int ti_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void ti_break(struct tty_struct *tty, int break_state); static void ti_interrupt_callback(struct urb *urb); @@ -818,7 +818,7 @@ static int ti_get_icount(struct tty_struct *tty, return 0; } -static int ti_ioctl(struct tty_struct *tty, struct file *file, +static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -1000,7 +1000,7 @@ static void ti_set_termios(struct tty_struct *tty, } -static int ti_tiocmget(struct tty_struct *tty, struct file *file) +static int ti_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); @@ -1033,8 +1033,8 @@ static int ti_tiocmget(struct tty_struct *tty, struct file *file) } -static int ti_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int ti_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2ff90a9c8f47..1c031309ab25 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -406,7 +406,7 @@ static void serial_unthrottle(struct tty_struct *tty) port->serial->type->unthrottle(tty); } -static int serial_ioctl(struct tty_struct *tty, struct file *file, +static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; @@ -417,7 +417,7 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file, /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->ioctl) { - retval = port->serial->type->ioctl(tty, file, cmd, arg); + retval = port->serial->type->ioctl(tty, cmd, arg); } else retval = -ENOIOCTLCMD; return retval; @@ -496,18 +496,18 @@ static const struct file_operations serial_proc_fops = { .release = single_release, }; -static int serial_tiocmget(struct tty_struct *tty, struct file *file) +static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); if (port->serial->type->tiocmget) - return port->serial->type->tiocmget(tty, file); + return port->serial->type->tiocmget(tty); return -EINVAL; } -static int serial_tiocmset(struct tty_struct *tty, struct file *file, +static int serial_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -515,7 +515,7 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file, dbg("%s - port %d", __func__, port->number); if (port->serial->type->tiocmset) - return port->serial->type->tiocmset(tty, file, set, clear); + return port->serial->type->tiocmset(tty, set, clear); return -EINVAL; } diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 3ab77c5d9819..c47b6ec03063 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -15,10 +15,10 @@ extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file); -extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file, +extern int usb_wwan_tiocmget(struct tty_struct *tty); +extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, +extern int usb_wwan_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); extern int usb_wwan_send_setup(struct usb_serial_port *port); extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index eb95aecc0015..a65ddd543869 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -79,7 +79,7 @@ void usb_wwan_set_termios(struct tty_struct *tty, } EXPORT_SYMBOL(usb_wwan_set_termios); -int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file) +int usb_wwan_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int value; @@ -98,7 +98,7 @@ int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file) } EXPORT_SYMBOL(usb_wwan_tiocmget); -int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file, +int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -178,7 +178,7 @@ static int set_serial_info(struct usb_serial_port *port, return retval; } -int usb_wwan_ioctl(struct tty_struct *tty, struct file *file, +int usb_wwan_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 3f9ac88d588c..5b073bcc807b 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -152,12 +152,12 @@ static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int whiteheat_write_room(struct tty_struct *tty); -static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, +static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file); -static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, +static int whiteheat_tiocmget(struct tty_struct *tty); +static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); static int whiteheat_chars_in_buffer(struct tty_struct *tty); @@ -833,7 +833,7 @@ static int whiteheat_write_room(struct tty_struct *tty) return (room); } -static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file) +static int whiteheat_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); @@ -850,7 +850,7 @@ static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file) return modem_signals; } -static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -874,7 +874,7 @@ static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, } -static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, +static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; |