diff options
author | Heiko Stübner <heiko@sntech.de> | 2012-04-28 14:20:00 +0400 |
---|---|---|
committer | Florian Tobias Schandinat <FlorianSchandinat@gmx.de> | 2012-04-29 23:35:35 +0400 |
commit | 2c8304d3125b9c75797a35037945df63869bfdf6 (patch) | |
tree | 7785826daa53e6ae5f27d66e404eb2627e53b830 /drivers | |
parent | 1f45f9dbb392f9ca0919e9cd2370ab66ae752ec8 (diff) | |
download | linux-2c8304d3125b9c75797a35037945df63869bfdf6.tar.xz |
video: auo_k190x: add code shared by controller drivers
The AUO-K190X controllers share a very similar set of commands and
can therefore also share most of the driver code.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/video/Kconfig | 17 | ||||
-rw-r--r-- | drivers/video/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/auo_k190x.c | 1046 | ||||
-rw-r--r-- | drivers/video/auo_k190x.h | 129 |
4 files changed, 1193 insertions, 0 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index edc2a22d289e..caf9eaa0fb93 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2382,6 +2382,23 @@ config FB_BROADSHEET and could also have been called by other names when coupled with a bridge adapter. +config FB_AUO_K190X + tristate "AUO-K190X EPD controller support" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + Provides support for epaper controllers from the K190X series + of AUO. These controllers can be used to drive epaper displays + from Sipix. + + This option enables the common support, shared by the individual + controller drivers. You will also have to enable the driver + for the controller type used in your device. + config FB_JZ4740 tristate "JZ4740 LCD framebuffer support" depends on FB && MACH_JZ4740 diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 9356add945b3..d5406f2f2e5f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -118,6 +118,7 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o obj-$(CONFIG_FB_MAXINE) += maxinefb.o obj-$(CONFIG_FB_METRONOME) += metronomefb.o obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o +obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c new file mode 100644 index 000000000000..77da6a2f43dc --- /dev/null +++ b/drivers/video/auo_k190x.c @@ -0,0 +1,1046 @@ +/* + * Common code for AUO-K190X framebuffer drivers + * + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pm_runtime.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/regulator/consumer.h> + +#include <video/auo_k190xfb.h> + +#include "auo_k190x.h" + +struct panel_info { + int w; + int h; +}; + +/* table of panel specific parameters to be indexed into by the board drivers */ +static struct panel_info panel_table[] = { + /* standard 6" */ + [AUOK190X_RESOLUTION_800_600] = { + .w = 800, + .h = 600, + }, + /* standard 9" */ + [AUOK190X_RESOLUTION_1024_768] = { + .w = 1024, + .h = 768, + }, +}; + +/* + * private I80 interface to the board driver + */ + +static void auok190x_issue_data(struct auok190xfb_par *par, u16 data) +{ + par->board->set_ctl(par, AUOK190X_I80_WR, 0); + par->board->set_hdb(par, data); + par->board->set_ctl(par, AUOK190X_I80_WR, 1); +} + +static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data) +{ + par->board->set_ctl(par, AUOK190X_I80_DC, 0); + auok190x_issue_data(par, data); + par->board->set_ctl(par, AUOK190X_I80_DC, 1); +} + +static int auok190x_issue_pixels(struct auok190xfb_par *par, int size, + u16 *data) +{ + struct device *dev = par->info->device; + int i; + u16 tmp; + + if (size & 3) { + dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n", + size); + return -EINVAL; + } + + for (i = 0; i < (size >> 1); i++) { + par->board->set_ctl(par, AUOK190X_I80_WR, 0); + + /* simple reduction of 8bit staticgray to 4bit gray + * combines 4 * 4bit pixel values into a 16bit value + */ + tmp = (data[2*i] & 0xF0) >> 4; + tmp |= (data[2*i] & 0xF000) >> 8; + tmp |= (data[2*i+1] & 0xF0) << 4; + tmp |= (data[2*i+1] & 0xF000); + + par->board->set_hdb(par, tmp); + par->board->set_ctl(par, AUOK190X_I80_WR, 1); + } + + return 0; +} + +static u16 auok190x_read_data(struct auok190xfb_par *par) +{ + u16 data; + + par->board->set_ctl(par, AUOK190X_I80_OE, 0); + data = par->board->get_hdb(par); + par->board->set_ctl(par, AUOK190X_I80_OE, 1); + + return data; +} + +/* + * Command interface for the controller drivers + */ + +void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data) +{ + par->board->set_ctl(par, AUOK190X_I80_CS, 0); + auok190x_issue_cmd(par, data); + par->board->set_ctl(par, AUOK190X_I80_CS, 1); +} +EXPORT_SYMBOL_GPL(auok190x_send_command_nowait); + +void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv) +{ + int i; + + par->board->set_ctl(par, AUOK190X_I80_CS, 0); + auok190x_issue_cmd(par, cmd); + + for (i = 0; i < argc; i++) + auok190x_issue_data(par, argv[i]); + par->board->set_ctl(par, AUOK190X_I80_CS, 1); +} +EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait); + +int auok190x_send_command(struct auok190xfb_par *par, u16 data) +{ + int ret; + + ret = par->board->wait_for_rdy(par); + if (ret) + return ret; + + auok190x_send_command_nowait(par, data); + return 0; +} +EXPORT_SYMBOL_GPL(auok190x_send_command); + +int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv) +{ + int ret; + + ret = par->board->wait_for_rdy(par); + if (ret) + return ret; + + auok190x_send_cmdargs_nowait(par, cmd, argc, argv); + return 0; +} +EXPORT_SYMBOL_GPL(auok190x_send_cmdargs); + +int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv) +{ + int i, ret; + + ret = par->board->wait_for_rdy(par); + if (ret) + return ret; + + par->board->set_ctl(par, AUOK190X_I80_CS, 0); + auok190x_issue_cmd(par, cmd); + + for (i = 0; i < argc; i++) + argv[i] = auok190x_read_data(par); + par->board->set_ctl(par, AUOK190X_I80_CS, 1); + + return 0; +} +EXPORT_SYMBOL_GPL(auok190x_read_cmdargs); + +void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv, int size, u16 *data) +{ + int i; + + par->board->set_ctl(par, AUOK190X_I80_CS, 0); + + auok190x_issue_cmd(par, cmd); + + for (i = 0; i < argc; i++) + auok190x_issue_data(par, argv[i]); + + auok190x_issue_pixels(par, size, data); + + par->board->set_ctl(par, AUOK190X_I80_CS, 1); +} +EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait); + +int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv, int size, u16 *data) +{ + int ret; + + ret = par->board->wait_for_rdy(par); + if (ret) + return ret; + + auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data); + + return 0; +} +EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels); + +/* + * fbdefio callbacks - common on both controllers. + */ + +static void auok190xfb_dpy_first_io(struct fb_info *info) +{ + /* tell runtime-pm that we wish to use the device in a short time */ + pm_runtime_get(info->device); +} + +/* this is called back from the deferred io workqueue */ +static void auok190xfb_dpy_deferred_io(struct fb_info *info, + struct list_head *pagelist) +{ + struct fb_deferred_io *fbdefio = info->fbdefio; + struct auok190xfb_par *par = info->par; + u16 yres = info->var.yres; + u16 xres = info->var.xres; + u16 y1 = 0, h = 0; + int prev_index = -1; + struct page *cur; + int h_inc; + int threshold; + + if (!list_empty(pagelist)) + /* the device resume should've been requested through first_io, + * if the resume did not finish until now, wait for it. + */ + pm_runtime_barrier(info->device); + else + /* We reached this via the fsync or some other way. + * In either case the first_io function did not run, + * so we runtime_resume the device here synchronously. + */ + pm_runtime_get_sync(info->device); + + /* Do a full screen update every n updates to prevent + * excessive darkening of the Sipix display. + * If we do this, there is no need to walk the pages. + */ + if (par->need_refresh(par)) { + par->update_all(par); + goto out; + } + + /* height increment is fixed per page */ + h_inc = DIV_ROUND_UP(PAGE_SIZE , xres); + + /* calculate number of pages from pixel height */ + threshold = par->consecutive_threshold / h_inc; + if (threshold < 1) + threshold = 1; + + /* walk the written page list and swizzle the data */ + list_for_each_entry(cur, &fbdefio->pagelist, lru) { + if (prev_index < 0) { + /* just starting so assign first page */ + y1 = (cur->index << PAGE_SHIFT) / xres; + h = h_inc; + } else if ((cur->index - prev_index) <= threshold) { + /* page is within our threshold for single updates */ + h += h_inc * (cur->index - prev_index); + } else { + /* page not consecutive, issue previous update first */ + par->update_partial(par, y1, y1 + h); + + /* start over with our non consecutive page */ + y1 = (cur->index << PAGE_SHIFT) / xres; + h = h_inc; + } + prev_index = cur->index; + } + + /* if we still have any pages to update we do so now */ + if (h >= yres) + /* its a full screen update, just do it */ + par->update_all(par); + else + par->update_partial(par, y1, min((u16) (y1 + h), yres)); + +out: + pm_runtime_mark_last_busy(info->device); + pm_runtime_put_autosuspend(info->device); +} + +/* + * framebuffer operations + */ + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct auok190xfb_par *par = info->par; + unsigned long p = *ppos; + void *dst; + int err = 0; + unsigned long total_size; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + + count = total_size - p; + } + + dst = (void *)(info->screen_base + p); + + if (copy_from_user(dst, buf, count)) + err = -EFAULT; + + if (!err) + *ppos += count; + + par->update_all(par); + + return (err) ? err : count; +} + +static void auok190xfb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + struct auok190xfb_par *par = info->par; + + sys_fillrect(info, rect); + + par->update_all(par); +} + +static void auok190xfb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + struct auok190xfb_par *par = info->par; + + sys_copyarea(info, area); + + par->update_all(par); +} + +static void auok190xfb_imageblit(struct fb_info *info, + const struct fb_image *image) +{ + struct auok190xfb_par *par = info->par; + + sys_imageblit(info, image); + + par->update_all(par); +} + +static int auok190xfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + if (info->var.xres != var->xres || info->var.yres != var->yres || + info->var.xres_virtual != var->xres_virtual || + info->var.yres_virtual != var->yres_virtual) { + pr_info("%s: Resolution not supported: X%u x Y%u\n", + __func__, var->xres, var->yres); + return -EINVAL; + } + + /* + * Memory limit + */ + + if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { + pr_info("%s: Memory Limit requested yres_virtual = %u\n", + __func__, var->yres_virtual); + return -ENOMEM; + } + + return 0; +} + +static struct fb_ops auok190xfb_ops = { + .owner = THIS_MODULE, + .fb_read = fb_sys_read, + .fb_write = auok190xfb_write, + .fb_fillrect = auok190xfb_fillrect, + .fb_copyarea = auok190xfb_copyarea, + .fb_imageblit = auok190xfb_imageblit, + .fb_check_var = auok190xfb_check_var, +}; + +/* + * Controller-functions common to both K1900 and K1901 + */ + +static int auok190x_read_temperature(struct auok190xfb_par *par) +{ + struct device *dev = par->info->device; + u16 data[4]; + int temp; + + pm_runtime_get_sync(dev); + + mutex_lock(&(par->io_lock)); + + auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data); + + mutex_unlock(&(par->io_lock)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + /* sanitize and split of half-degrees for now */ + temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1); + + /* handle positive and negative temperatures */ + if (temp >= 201) + return (255 - temp + 1) * (-1); + else + return temp; +} + +static void auok190x_identify(struct auok190xfb_par *par) +{ + struct device *dev = par->info->device; + u16 data[4]; + + pm_runtime_get_sync(dev); + + mutex_lock(&(par->io_lock)); + + auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data); + + mutex_unlock(&(par->io_lock)); + + par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK; + + par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]); + par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]); + par->panel_model = AUOK190X_VERSION_MODEL(data[2]); + + par->tcon_version = AUOK190X_VERSION_TCON(data[3]); + par->lut_version = AUOK190X_VERSION_LUT(data[3]); + + dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x", + par->panel_size_int, par->panel_size_float, par->panel_model, + par->epd_type, par->tcon_version, par->lut_version); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); +} + +/* + * Sysfs functions + */ + +static ssize_t update_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct auok190xfb_par *par = info->par; + + return sprintf(buf, "%d\n", par->update_mode); +} + +static ssize_t update_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct auok190xfb_par *par = info->par; + int mode, ret; + + ret = kstrtoint(buf, 10, &mode); + if (ret) + return ret; + + par->update_mode = mode; + + /* if we enter a better mode, do a full update */ + if (par->last_mode > 1 && mode < par->last_mode) + par->update_all(par); + + return count; +} + +static ssize_t flash_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct auok190xfb_par *par = info->par; + + return sprintf(buf, "%d\n", par->flash); +} + +static ssize_t flash_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct auok190xfb_par *par = info->par; + int flash, ret; + + ret = kstrtoint(buf, 10, &flash); + if (ret) + return ret; + + if (flash > 0) + par->flash = 1; + else + par->flash = 0; + + return count; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fb_info *info = dev_get_drvdata(dev); + struct auok190xfb_par *par = info->par; + int temp; + + temp = auok190x_read_temperature(par); + return sprintf(buf, "%d\n", temp); +} + +static DEVICE_ATTR(update_mode, 0644, update_mode_show, update_mode_store); +static DEVICE_ATTR(flash, 0644, flash_show, flash_store); +static DEVICE_ATTR(temp, 0644, temp_show, NULL); + +static struct attribute *auok190x_attributes[] = { + &dev_attr_update_mode.attr, + &dev_attr_flash.attr, + &dev_attr_temp.attr, + NULL +}; + +static const struct attribute_group auok190x_attr_group = { + .attrs = auok190x_attributes, +}; + +static int auok190x_power(struct auok190xfb_par *par, bool on) +{ + struct auok190x_board *board = par->board; + int ret; + + if (on) { + /* We should maintain POWER up for at least 80ms before set + * RST_N and SLP_N to high (TCON spec 20100803_v35 p59) + */ + ret = regulator_enable(par->regulator); + if (ret) + return ret; + + msleep(200); + gpio_set_value(board->gpio_nrst, 1); + gpio_set_value(board->gpio_nsleep, 1); + msleep(200); + } else { + regulator_disable(par->regulator); + gpio_set_value(board->gpio_nrst, 0); + gpio_set_value(board->gpio_nsleep, 0); + } + + return 0; +} + +/* + * Recovery - powercycle the controller + */ + +static void auok190x_recover(struct auok190xfb_par *par) +{ + auok190x_power(par, 0); + msleep(100); + auok190x_power(par, 1); + + par->init(par); + + /* wait for init to complete */ + par->board->wait_for_rdy(par); +} + +/* + * Power-management + */ + +#ifdef CONFIG_PM +static int auok190x_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fb_info *info = platform_get_drvdata(pdev); + struct auok190xfb_par *par = info->par; + struct auok190x_board *board = par->board; + u16 standby_param; + + /* take and keep the lock until we are resumed, as the controller + * will never reach the non-busy state when in standby mode + */ + mutex_lock(&(par->io_lock)); + + if (par->standby) { + dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n"); + mutex_unlock(&(par->io_lock)); + return 0; + } + + /* according to runtime_pm.txt runtime_suspend only means, that the + * device will not process data and will not communicate with the CPU + * As we hold the lock, this stays true even without standby + */ + if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { + dev_dbg(dev, "runtime suspend without standby\n"); + goto finish; + } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) { + /* for some TCON versions STANDBY expects a parameter (0) but + * it seems the real tcon version has to be determined yet. + */ + dev_dbg(dev, "runtime suspend with additional empty param\n"); + standby_param = 0; + auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1, + &standby_param); + } else { + dev_dbg(dev, "runtime suspend without param\n"); + auok190x_send_command(par, AUOK190X_CMD_STANDBY); + } + + msleep(64); + +finish: + par->standby = 1; + + return 0; +} + +static int auok190x_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fb_info *info = platform_get_drvdata(pdev); + struct auok190xfb_par *par = info->par; + struct auok190x_board *board = par->board; + + if (!par->standby) { + dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n"); + return 0; + } + + if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { + dev_dbg(dev, "runtime resume without standby\n"); + } else { + /* when in standby, controller is always busy + * and only accepts the wakeup command + */ + dev_dbg(dev, "runtime resume from standby\n"); + auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP); + + msleep(160); + + /* wait for the controller to be ready and release the lock */ + board->wait_for_rdy(par); + } + + par->standby = 0; + + mutex_unlock(&(par->io_lock)); + + return 0; +} + +static int auok190x_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fb_info *info = platform_get_drvdata(pdev); + struct auok190xfb_par *par = info->par; + struct auok190x_board *board = par->board; + int ret; + + dev_dbg(dev, "suspend\n"); + if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { + /* suspend via powering off the ic */ + dev_dbg(dev, "suspend with broken standby\n"); + + auok190x_power(par, 0); + } else { + dev_dbg(dev, "suspend using sleep\n"); + + /* the sleep state can only be entered from the standby state. + * pm_runtime_get_noresume gets called before the suspend call. + * So the devices usage count is >0 but it is not necessarily + * active. + */ + if (!pm_runtime_status_suspended(dev)) { + ret = auok190x_runtime_suspend(dev); + if (ret < 0) { + dev_err(dev, "auok190x_runtime_suspend failed with %d\n", + ret); + return ret; + } + par->manual_standby = 1; + } + + gpio_direction_output(board->gpio_nsleep, 0); + } + + msleep(100); + + return 0; +} + +static int auok190x_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fb_info *info = platform_get_drvdata(pdev); + struct auok190xfb_par *par = info->par; + struct auok190x_board *board = par->board; + + dev_dbg(dev, "resume\n"); + if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { + dev_dbg(dev, "resume with broken standby\n"); + + auok190x_power(par, 1); + + par->init(par); + } else { + dev_dbg(dev, "resume from sleep\n"); + + /* device should be in runtime suspend when we were suspended + * and pm_runtime_put_sync gets called after this function. + * So there is no need to touch the standby mode here at all. + */ + gpio_direction_output(board->gpio_nsleep, 1); + msleep(100); + + /* an additional init call seems to be necessary after sleep */ + auok190x_runtime_resume(dev); + par->init(par); + + /* if we were runtime-suspended before, suspend again*/ + if (!par->manual_standby) + auok190x_runtime_suspend(dev); + else + par->manual_standby = 0; + } + + return 0; +} +#endif + +const struct dev_pm_ops auok190x_pm = { + SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume) +}; +EXPORT_SYMBOL_GPL(auok190x_pm); + +/* + * Common probe and remove code + */ + +int __devinit auok190x_common_probe(struct platform_device *pdev, + struct auok190x_init_data *init) +{ + struct auok190x_board *board = init->board; + struct auok190xfb_par *par; + struct fb_info *info; + struct panel_info *panel; + int videomemorysize, ret; + unsigned char *videomemory; + + /* check board contents */ + if (!board->init || !board->cleanup || !board->wait_for_rdy + || !board->set_ctl || !board->set_hdb || !board->get_hdb + || !board->setup_irq) + return -EINVAL; + + info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev); + if (!info) + return -ENOMEM; + + par = info->par; + par->info = info; + par->board = board; + par->recover = auok190x_recover; + par->update_partial = init->update_partial; + par->update_all = init->update_all; + par->need_refresh = init->need_refresh; + par->init = init->init; + + /* init update modes */ + par->update_cnt = 0; + par->update_mode = -1; + par->last_mode = -1; + par->flash = 0; + + par->regulator = regulator_get(info->device, "vdd"); + if (IS_ERR(par->regulator)) { + ret = PTR_ERR(par->regulator); + dev_err(info->device, "Failed to get regulator: %d\n", ret); + goto err_reg; + } + + ret = board->init(par); + if (ret) { + dev_err(info->device, "board init failed, %d\n", ret); + goto err_board; + } + + ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep"); + if (ret) { + dev_err(info->device, "could not request sleep gpio, %d\n", + ret); + goto err_gpio1; + } + + ret = gpio_direction_output(board->gpio_nsleep, 0); + if (ret) { + dev_err(info->device, "could not set sleep gpio, %d\n", ret); + goto err_gpio2; + } + + ret = gpio_request(board->gpio_nrst, "AUOK190x reset"); + if (ret) { + dev_err(info->device, "could not request reset gpio, %d\n", + ret); + goto err_gpio2; + } + + ret = gpio_direction_output(board->gpio_nrst, 0); + if (ret) { + dev_err(info->device, "could not set reset gpio, %d\n", ret); + goto err_gpio3; + } + + ret = auok190x_power(par, 1); + if (ret) { + dev_err(info->device, "could not power on the device, %d\n", + ret); + goto err_gpio3; + } + + mutex_init(&par->io_lock); + + init_waitqueue_head(&par->waitq); + + ret = par->board->setup_irq(par->info); + if (ret) { + dev_err(info->device, "could not setup ready-irq, %d\n", ret); + goto err_irq; + } + + /* wait for init to complete */ + par->board->wait_for_rdy(par); + + /* + * From here on the controller can talk to us + */ + + /* initialise fix, var, resolution and rotation */ + + strlcpy(info->fix.id, init->id, 16); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; + info->fix.xpanstep = 0; + info->fix.ypanstep = 0; + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_NONE; + + info->var.bits_per_pixel = 8; + info->var.grayscale = 1; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + + panel = &panel_table[board->resolution]; + + /* if 90 degree rotation, switch width and height */ + if (board->rotation & 1) { + info->var.xres = panel->h; + info->var.yres = panel->w; + info->var.xres_virtual = panel->h; + info->var.yres_virtual = panel->w; + info->fix.line_length = panel->h; + } else { + info->var.xres = panel->w; + info->var.yres = panel->h; + info->var.xres_virtual = panel->w; + info->var.yres_virtual = panel->h; + info->fix.line_length = panel->w; + } + + par->resolution = board->resolution; + par->rotation = board->rotation; + + /* videomemory handling */ + + videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE); + videomemory = vmalloc(videomemorysize); + if (!videomemory) { + ret = -ENOMEM; + goto err_irq; + } + + memset(videomemory, 0, videomemorysize); + info->screen_base = (char *)videomemory; + info->fix.smem_len = videomemorysize; + + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; + info->fbops = &auok190xfb_ops; + + /* deferred io init */ + + info->fbdefio = devm_kzalloc(info->device, + sizeof(struct fb_deferred_io), + GFP_KERNEL); + if (!info->fbdefio) { + dev_err(info->device, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto err_defio; + } + + dev_dbg(info->device, "targetting %d frames per second\n", board->fps); + info->fbdefio->delay = HZ / board->fps; + info->fbdefio->first_io = auok190xfb_dpy_first_io, + info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io, + fb_deferred_io_init(info); + + /* color map */ + + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (ret < 0) { + dev_err(info->device, "Failed to allocate colormap\n"); + goto err_cmap; + } + + /* controller init */ + + par->consecutive_threshold = 100; + par->init(par); + auok190x_identify(par); + + platform_set_drvdata(pdev, info); + + ret = register_framebuffer(info); + if (ret < 0) + goto err_regfb; + + ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group); + if (ret) + goto err_sysfs; + + dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n", + info->node, info->var.xres, info->var.yres, + videomemorysize >> 10); + + /* increase autosuspend_delay when we use alternative methods + * for runtime_pm + */ + par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) + ? 1000 : 200; + + pm_runtime_set_active(info->device); + pm_runtime_enable(info->device); + pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay); + pm_runtime_use_autosuspend(info->device); + + return 0; + +err_sysfs: + unregister_framebuffer(info); +err_regfb: + fb_dealloc_cmap(&info->cmap); +err_cmap: + fb_deferred_io_cleanup(info); + kfree(info->fbdefio); +err_defio: + vfree((void *)info->screen_base); +err_irq: + auok190x_power(par, 0); +err_gpio3: + gpio_free(board->gpio_nrst); +err_gpio2: + gpio_free(board->gpio_nsleep); +err_gpio1: + board->cleanup(par); +err_board: + regulator_put(par->regulator); +err_reg: + framebuffer_release(info); + + return ret; +} +EXPORT_SYMBOL_GPL(auok190x_common_probe); + +int __devexit auok190x_common_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + struct auok190xfb_par *par = info->par; + struct auok190x_board *board = par->board; + + pm_runtime_disable(info->device); + + sysfs_remove_group(&info->device->kobj, &auok190x_attr_group); + + unregister_framebuffer(info); + + fb_dealloc_cmap(&info->cmap); + + fb_deferred_io_cleanup(info); + kfree(info->fbdefio); + + vfree((void *)info->screen_base); + + auok190x_power(par, 0); + + gpio_free(board->gpio_nrst); + gpio_free(board->gpio_nsleep); + + board->cleanup(par); + + regulator_put(par->regulator); + + framebuffer_release(info); + + return 0; +} +EXPORT_SYMBOL_GPL(auok190x_common_remove); + +MODULE_DESCRIPTION("Common code for AUO-K190X controllers"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/auo_k190x.h b/drivers/video/auo_k190x.h new file mode 100644 index 000000000000..e35af1f51b28 --- /dev/null +++ b/drivers/video/auo_k190x.h @@ -0,0 +1,129 @@ +/* + * Private common definitions for AUO-K190X framebuffer drivers + * + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * I80 interface specific defines + */ + +#define AUOK190X_I80_CS 0x01 +#define AUOK190X_I80_DC 0x02 +#define AUOK190X_I80_WR 0x03 +#define AUOK190X_I80_OE 0x04 + +/* + * AUOK190x commands, common to both controllers + */ + +#define AUOK190X_CMD_INIT 0x0000 +#define AUOK190X_CMD_STANDBY 0x0001 +#define AUOK190X_CMD_WAKEUP 0x0002 +#define AUOK190X_CMD_TCON_RESET 0x0003 +#define AUOK190X_CMD_DATA_STOP 0x1002 +#define AUOK190X_CMD_LUT_START 0x1003 +#define AUOK190X_CMD_DISP_REFRESH 0x1004 +#define AUOK190X_CMD_DISP_RESET 0x1005 +#define AUOK190X_CMD_PRE_DISPLAY_START 0x100D +#define AUOK190X_CMD_PRE_DISPLAY_STOP 0x100F +#define AUOK190X_CMD_FLASH_W 0x2000 +#define AUOK190X_CMD_FLASH_E 0x2001 +#define AUOK190X_CMD_FLASH_STS 0x2002 +#define AUOK190X_CMD_FRAMERATE 0x3000 +#define AUOK190X_CMD_READ_VERSION 0x4000 +#define AUOK190X_CMD_READ_STATUS 0x4001 +#define AUOK190X_CMD_READ_LUT 0x4003 +#define AUOK190X_CMD_DRIVERTIMING 0x5000 +#define AUOK190X_CMD_LBALANCE 0x5001 +#define AUOK190X_CMD_AGINGMODE 0x6000 +#define AUOK190X_CMD_AGINGEXIT 0x6001 + +/* + * Common settings for AUOK190X_CMD_INIT + */ + +#define AUOK190X_INIT_DATA_FILTER (0 << 12) +#define AUOK190X_INIT_DATA_BYPASS (1 << 12) +#define AUOK190X_INIT_INVERSE_WHITE (0 << 9) +#define AUOK190X_INIT_INVERSE_BLACK (1 << 9) +#define AUOK190X_INIT_SCAN_DOWN (0 << 1) +#define AUOK190X_INIT_SCAN_UP (1 << 1) +#define AUOK190X_INIT_SHIFT_LEFT (0 << 0) +#define AUOK190X_INIT_SHIFT_RIGHT (1 << 0) + +/* Common bits to pixels + * Mode 15-12 11-8 7-4 3-0 + * format0 4 3 2 1 + * format1 3 4 1 2 + */ + +#define AUOK190X_INIT_FORMAT0 0 +#define AUOK190X_INIT_FORMAT1 (1 << 6) + +/* + * settings for AUOK190X_CMD_RESET + */ + +#define AUOK190X_RESET_TCON (0 << 0) +#define AUOK190X_RESET_NORMAL (1 << 0) +#define AUOK190X_RESET_PON (1 << 1) + +/* + * AUOK190X_CMD_VERSION + */ + +#define AUOK190X_VERSION_TEMP_MASK (0x1ff) +#define AUOK190X_VERSION_EPD_MASK (0xff) +#define AUOK190X_VERSION_SIZE_INT(_val) ((_val & 0xfc00) >> 10) +#define AUOK190X_VERSION_SIZE_FLOAT(_val) ((_val & 0x3c0) >> 6) +#define AUOK190X_VERSION_MODEL(_val) (_val & 0x3f) +#define AUOK190X_VERSION_LUT(_val) (_val & 0xff) +#define AUOK190X_VERSION_TCON(_val) ((_val & 0xff00) >> 8) + +/* + * update modes for CMD_PARTIALDISP on K1900 and CMD_DDMA on K1901 + */ + +#define AUOK190X_UPDATE_MODE(_res) ((_res & 0x7) << 12) +#define AUOK190X_UPDATE_NONFLASH (1 << 15) + +/* + * track panel specific parameters for common init + */ + +struct auok190x_init_data { + char *id; + struct auok190x_board *board; + + void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2); + void (*update_all)(struct auok190xfb_par *par); + bool (*need_refresh)(struct auok190xfb_par *par); + void (*init)(struct auok190xfb_par *par); +}; + + +extern void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data); +extern int auok190x_send_command(struct auok190xfb_par *par, u16 data); +extern void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv); +extern int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv); +extern void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, + u16 cmd, int argc, u16 *argv, + int size, u16 *data); +extern int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv, int size, + u16 *data); +extern int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd, + int argc, u16 *argv); + +extern int auok190x_common_probe(struct platform_device *pdev, + struct auok190x_init_data *init); +extern int auok190x_common_remove(struct platform_device *pdev); + +extern const struct dev_pm_ops auok190x_pm; |