Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1314 insertions, 0 deletions

diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
new file mode 100644
index 000000000000..5dceddedf507
--- /dev/null
+++ b/drivers/video/pm2fb.c
@@ -0,0 +1,1314 @@
+/*
+ * Permedia2 framebuffer driver.
+ *
+ * 2.5/2.6 driver:
+ * Copyright (c) 2003 Jim Hague (jim.hague@acm.org)
+ *
+ * based on 2.4 driver:
+ * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * Copyright (c) 1999 Jakub Jelinek (jakub@redhat.com)
+ *
+ * and additional input from James Simmon's port of Hannu Mallat's tdfx
+ * driver.
+ *
+ * I have a Creative Graphics Blaster Exxtreme card - pm2fb on x86.  I
+ * have no access to other pm2fb implementations. Sparc (and thus
+ * hopefully other big-endian) devices now work, thanks to a lot of
+ * testing work by Ron Murray. I have no access to CVision hardware,
+ * and therefore for now I am omitting the CVision code.
+ *
+ * Multiple boards support has been on the TODO list for ages.
+ * Don't expect this to change.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <video/permedia2.h>
+#include <video/cvisionppc.h>
+
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+#error	"The endianness of the target host has not been defined."
+#endif
+
+#if !defined(CONFIG_PCI)
+#error "Only generic PCI cards supported."
+#endif
+
+#undef PM2FB_MASTER_DEBUG
+#ifdef PM2FB_MASTER_DEBUG
+#define DPRINTK(a,b...)	printk(KERN_DEBUG "pm2fb: %s: " a, __FUNCTION__ , ## b)
+#else
+#define DPRINTK(a,b...)
+#endif
+
+/*
+ * Driver data 
+ */
+static char *mode __devinitdata = NULL;
+
+/*
+ * The XFree GLINT driver will (I think to implement hardware cursor
+ * support on TVP4010 and similar where there is no RAMDAC - see
+ * comment in set_video) always request +ve sync regardless of what
+ * the mode requires. This screws me because I have a Sun
+ * fixed-frequency monitor which absolutely has to have -ve sync. So
+ * these flags allow the user to specify that requests for +ve sync
+ * should be silently turned in -ve sync.
+ */
+static int lowhsync __devinitdata = 0;
+static int lowvsync __devinitdata = 0;
+
+/*
+ * The hardware state of the graphics card that isn't part of the
+ * screeninfo.
+ */
+struct pm2fb_par
+{
+	pm2type_t	type;		/* Board type */
+	u32		fb_size;	/* framebuffer memory size */
+	unsigned char	__iomem *v_fb;  /* virtual address of frame buffer */
+	unsigned char	__iomem *v_regs;/* virtual address of p_regs */
+	u32 	   	memclock;	/* memclock */
+	u32		video;		/* video flags before blanking */
+	u32		mem_config;	/* MemConfig reg at probe */
+	u32		mem_control;	/* MemControl reg at probe */
+	u32		boot_address;	/* BootAddress reg at probe */
+};
+
+/*
+ * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
+ * if we don't use modedb.
+ */
+static struct fb_fix_screeninfo pm2fb_fix __devinitdata = {
+	.id =		"", 
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_PSEUDOCOLOR,
+	.xpanstep =	1,
+	.ypanstep =	1,
+	.ywrapstep =	0, 
+	.accel =	FB_ACCEL_NONE,
+};
+
+/*
+ * Default video mode. In case the modedb doesn't work.
+ */
+static struct fb_var_screeninfo pm2fb_var __devinitdata = {
+	/* "640x480, 8 bpp @ 60 Hz */
+	.xres =		640,
+	.yres =		480,
+	.xres_virtual =	640,
+	.yres_virtual =	480,
+	.bits_per_pixel =8,
+	.red =		{0, 8, 0},
+	.blue =		{0, 8, 0},
+	.green =	{0, 8, 0},
+	.activate =	FB_ACTIVATE_NOW,
+	.height =	-1,
+	.width =	-1,
+	.accel_flags =	0,
+	.pixclock =	39721,
+	.left_margin =	40,
+	.right_margin =	24,
+	.upper_margin =	32,
+	.lower_margin =	11,
+	.hsync_len =	96,
+	.vsync_len =	2,
+	.vmode =	FB_VMODE_NONINTERLACED
+};
+
+/*
+ * Utility functions
+ */
+
+inline static u32 RD32(unsigned char __iomem *base, s32 off)
+{
+	return fb_readl(base + off);
+}
+
+inline static void WR32(unsigned char __iomem *base, s32 off, u32 v)
+{
+	fb_writel(v, base + off);
+}
+
+inline static u32 pm2_RD(struct pm2fb_par* p, s32 off)
+{
+	return RD32(p->v_regs, off);
+}
+
+inline static void pm2_WR(struct pm2fb_par* p, s32 off, u32 v)
+{
+	WR32(p->v_regs, off, v);
+}
+
+inline static u32 pm2_RDAC_RD(struct pm2fb_par* p, s32 idx)
+{
+	int index = PM2R_RD_INDEXED_DATA;
+	switch (p->type) {
+	case PM2_TYPE_PERMEDIA2:
+		pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, idx);
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
+		index = PM2VR_RD_INDEXED_DATA;
+		break;
+	}	
+	mb();
+	return pm2_RD(p, index);
+}
+
+inline static void pm2_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
+{
+	int index = PM2R_RD_INDEXED_DATA;
+	switch (p->type) {
+	case PM2_TYPE_PERMEDIA2:
+		pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, idx);
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
+		index = PM2VR_RD_INDEXED_DATA;
+		break;
+	}	
+	mb();
+	pm2_WR(p, index, v);
+}
+
+inline static void pm2v_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
+{
+	pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
+	mb();
+	pm2_WR(p, PM2VR_RD_INDEXED_DATA, v);
+}
+
+#ifdef CONFIG_FB_PM2_FIFO_DISCONNECT
+#define WAIT_FIFO(p,a)
+#else
+inline static void WAIT_FIFO(struct pm2fb_par* p, u32 a)
+{
+	while( pm2_RD(p, PM2R_IN_FIFO_SPACE) < a );
+	mb();
+}
+#endif
+
+/*
+ * partial products for the supported horizontal resolutions.
+ */
+#define PACKPP(p0,p1,p2)	(((p2) << 6) | ((p1) << 3) | (p0))
+static const struct {
+	u16 width;
+	u16 pp;
+} pp_table[] = {
+	{ 32,	PACKPP(1, 0, 0) }, { 64,	PACKPP(1, 1, 0) },
+	{ 96,	PACKPP(1, 1, 1) }, { 128,	PACKPP(2, 1, 1) },
+	{ 160,	PACKPP(2, 2, 1) }, { 192,	PACKPP(2, 2, 2) },
+	{ 224,	PACKPP(3, 2, 1) }, { 256,	PACKPP(3, 2, 2) },
+	{ 288,	PACKPP(3, 3, 1) }, { 320,	PACKPP(3, 3, 2) },
+	{ 384,	PACKPP(3, 3, 3) }, { 416,	PACKPP(4, 3, 1) },
+	{ 448,	PACKPP(4, 3, 2) }, { 512,	PACKPP(4, 3, 3) },
+	{ 544,	PACKPP(4, 4, 1) }, { 576,	PACKPP(4, 4, 2) },
+	{ 640,	PACKPP(4, 4, 3) }, { 768,	PACKPP(4, 4, 4) },
+	{ 800,	PACKPP(5, 4, 1) }, { 832,	PACKPP(5, 4, 2) },
+	{ 896,	PACKPP(5, 4, 3) }, { 1024,	PACKPP(5, 4, 4) },
+	{ 1056,	PACKPP(5, 5, 1) }, { 1088,	PACKPP(5, 5, 2) },
+	{ 1152,	PACKPP(5, 5, 3) }, { 1280,	PACKPP(5, 5, 4) },
+	{ 1536,	PACKPP(5, 5, 5) }, { 1568,	PACKPP(6, 5, 1) },
+	{ 1600,	PACKPP(6, 5, 2) }, { 1664,	PACKPP(6, 5, 3) },
+	{ 1792,	PACKPP(6, 5, 4) }, { 2048,	PACKPP(6, 5, 5) },
+	{ 0,	0 } };
+
+static u32 partprod(u32 xres)
+{
+	int i;
+
+	for (i = 0; pp_table[i].width && pp_table[i].width != xres; i++)
+		;
+	if ( pp_table[i].width == 0 )
+		DPRINTK("invalid width %u\n", xres);
+	return pp_table[i].pp;
+}
+
+static u32 to3264(u32 timing, int bpp, int is64)
+{
+	switch (bpp) {
+	case 8:
+		timing >>= 2 + is64;
+		break;
+	case 16:
+		timing >>= 1 + is64;
+		break;
+	case 24:
+		timing = (timing * 3) >> (2 + is64);
+		break;
+	case 32:
+		if (is64)
+			timing >>= 1;
+		break;
+	}
+	return timing;
+}
+
+static void pm2_mnp(u32 clk, unsigned char* mm, unsigned char* nn,
+		    unsigned char* pp)
+{
+	unsigned char m;
+	unsigned char n;
+	unsigned char p;
+	u32 f;
+	s32 curr;
+	s32 delta = 100000;
+
+	*mm = *nn = *pp = 0;
+	for (n = 2; n < 15; n++) {
+		for (m = 2; m; m++) {
+			f = PM2_REFERENCE_CLOCK * m / n;
+			if (f >= 150000 && f <= 300000) {
+				for ( p = 0; p < 5; p++, f >>= 1) {
+					curr = ( clk > f ) ? clk - f : f - clk;
+					if ( curr < delta ) {
+						delta=curr;
+						*mm=m;
+						*nn=n;
+						*pp=p;
+					}
+				}
+			}
+		}
+	}
+}
+
+static void pm2v_mnp(u32 clk, unsigned char* mm, unsigned char* nn,
+		     unsigned char* pp)
+{
+	unsigned char m;
+	unsigned char n;
+	unsigned char p;
+	u32 f;
+	s32 delta = 1000;
+
+	*mm = *nn = *pp = 0;
+	for (n = 1; n; n++) {
+		for ( m = 1; m; m++) {
+			for ( p = 0; p < 2; p++) {
+				f = PM2_REFERENCE_CLOCK * n / (m * (1 << (p + 1)));
+				if ( clk > f - delta && clk < f + delta ) {
+					delta = ( clk > f ) ? clk - f : f - clk;
+					*mm=m;
+					*nn=n;
+					*pp=p;
+				}
+			}
+		}
+	}
+}
+
+static void clear_palette(struct pm2fb_par* p) {
+	int i=256;
+
+	WAIT_FIFO(p, 1);
+	pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, 0);
+	wmb();
+	while (i--) {
+		WAIT_FIFO(p, 3);
+		pm2_WR(p, PM2R_RD_PALETTE_DATA, 0);
+		pm2_WR(p, PM2R_RD_PALETTE_DATA, 0);
+		pm2_WR(p, PM2R_RD_PALETTE_DATA, 0);
+	}
+}
+
+static void reset_card(struct pm2fb_par* p)
+{
+	if (p->type == PM2_TYPE_PERMEDIA2V)
+		pm2_WR(p, PM2VR_RD_INDEX_HIGH, 0);
+	pm2_WR(p, PM2R_RESET_STATUS, 0);
+	mb();
+	while (pm2_RD(p, PM2R_RESET_STATUS) & PM2F_BEING_RESET)
+		;
+	mb();
+#ifdef CONFIG_FB_PM2_FIFO_DISCONNECT
+	DPRINTK("FIFO disconnect enabled\n");
+	pm2_WR(p, PM2R_FIFO_DISCON, 1);
+	mb();
+#endif
+
+	/* Restore stashed memory config information from probe */
+	WAIT_FIFO(p, 3);
+	pm2_WR(p, PM2R_MEM_CONTROL, p->mem_control);
+	pm2_WR(p, PM2R_BOOT_ADDRESS, p->boot_address);
+	wmb();
+	pm2_WR(p, PM2R_MEM_CONFIG, p->mem_config);
+}
+
+static void reset_config(struct pm2fb_par* p)
+{
+	WAIT_FIFO(p, 52);
+	pm2_WR(p, PM2R_CHIP_CONFIG, pm2_RD(p, PM2R_CHIP_CONFIG)&
+	       ~(PM2F_VGA_ENABLE|PM2F_VGA_FIXED));
+	pm2_WR(p, PM2R_BYPASS_WRITE_MASK, ~(0L));
+	pm2_WR(p, PM2R_FRAMEBUFFER_WRITE_MASK, ~(0L));
+	pm2_WR(p, PM2R_FIFO_CONTROL, 0);
+	pm2_WR(p, PM2R_APERTURE_ONE, 0);
+	pm2_WR(p, PM2R_APERTURE_TWO, 0);
+	pm2_WR(p, PM2R_RASTERIZER_MODE, 0);
+	pm2_WR(p, PM2R_DELTA_MODE, PM2F_DELTA_ORDER_RGB);
+	pm2_WR(p, PM2R_LB_READ_FORMAT, 0);
+	pm2_WR(p, PM2R_LB_WRITE_FORMAT, 0); 
+	pm2_WR(p, PM2R_LB_READ_MODE, 0);
+	pm2_WR(p, PM2R_LB_SOURCE_OFFSET, 0);
+	pm2_WR(p, PM2R_FB_SOURCE_OFFSET, 0);
+	pm2_WR(p, PM2R_FB_PIXEL_OFFSET, 0);
+	pm2_WR(p, PM2R_FB_WINDOW_BASE, 0);
+	pm2_WR(p, PM2R_LB_WINDOW_BASE, 0);
+	pm2_WR(p, PM2R_FB_SOFT_WRITE_MASK, ~(0L));
+	pm2_WR(p, PM2R_FB_HARD_WRITE_MASK, ~(0L));
+	pm2_WR(p, PM2R_FB_READ_PIXEL, 0);
+	pm2_WR(p, PM2R_DITHER_MODE, 0);
+	pm2_WR(p, PM2R_AREA_STIPPLE_MODE, 0);
+	pm2_WR(p, PM2R_DEPTH_MODE, 0);
+	pm2_WR(p, PM2R_STENCIL_MODE, 0);
+	pm2_WR(p, PM2R_TEXTURE_ADDRESS_MODE, 0);
+	pm2_WR(p, PM2R_TEXTURE_READ_MODE, 0);
+	pm2_WR(p, PM2R_TEXEL_LUT_MODE, 0);
+	pm2_WR(p, PM2R_YUV_MODE, 0);
+	pm2_WR(p, PM2R_COLOR_DDA_MODE, 0);
+	pm2_WR(p, PM2R_TEXTURE_COLOR_MODE, 0);
+	pm2_WR(p, PM2R_FOG_MODE, 0);
+	pm2_WR(p, PM2R_ALPHA_BLEND_MODE, 0);
+	pm2_WR(p, PM2R_LOGICAL_OP_MODE, 0);
+	pm2_WR(p, PM2R_STATISTICS_MODE, 0);
+	pm2_WR(p, PM2R_SCISSOR_MODE, 0);
+	pm2_WR(p, PM2R_FILTER_MODE, PM2F_SYNCHRONIZATION);
+	switch (p->type) {
+	case PM2_TYPE_PERMEDIA2:
+		pm2_RDAC_WR(p, PM2I_RD_MODE_CONTROL, 0); /* no overlay */
+		pm2_RDAC_WR(p, PM2I_RD_CURSOR_CONTROL, 0);
+		pm2_RDAC_WR(p, PM2I_RD_MISC_CONTROL, PM2F_RD_PALETTE_WIDTH_8);
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		pm2v_RDAC_WR(p, PM2VI_RD_MISC_CONTROL, 1); /* 8bit */
+		break;
+	}
+	pm2_RDAC_WR(p, PM2I_RD_COLOR_KEY_CONTROL, 0);
+	pm2_RDAC_WR(p, PM2I_RD_OVERLAY_KEY, 0);
+	pm2_RDAC_WR(p, PM2I_RD_RED_KEY, 0);
+	pm2_RDAC_WR(p, PM2I_RD_GREEN_KEY, 0);
+	pm2_RDAC_WR(p, PM2I_RD_BLUE_KEY, 0);
+}
+
+static void set_aperture(struct pm2fb_par* p, u32 depth)
+{
+	/*
+	 * The hardware is little-endian. When used in big-endian
+	 * hosts, the on-chip aperture settings are used where
+	 * possible to translate from host to card byte order.
+	 */
+	WAIT_FIFO(p, 4);
+#ifdef __LITTLE_ENDIAN
+	pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_STANDARD);
+#else
+	switch (depth) {
+	case 24:	/* RGB->BGR */
+		/*
+		 * We can't use the aperture to translate host to
+		 * card byte order here, so we switch to BGR mode
+		 * in pm2fb_set_par().
+		 */
+	case 8:		/* B->B */
+		pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_STANDARD);
+		break;
+	case 16:	/* HL->LH */
+		pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_HALFWORDSWAP);
+		break;
+	case 32:	/* RGBA->ABGR */
+		pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_BYTESWAP);
+		break;
+	}
+#endif
+
+	// We don't use aperture two, so this may be superflous
+	pm2_WR(p, PM2R_APERTURE_TWO, PM2F_APERTURE_STANDARD);
+}
+
+static void set_color(struct pm2fb_par* p, unsigned char regno,
+		      unsigned char r, unsigned char g, unsigned char b)
+{
+	WAIT_FIFO(p, 4);
+	pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, regno);
+	wmb();
+	pm2_WR(p, PM2R_RD_PALETTE_DATA, r);
+	wmb();
+	pm2_WR(p, PM2R_RD_PALETTE_DATA, g);
+	wmb();
+	pm2_WR(p, PM2R_RD_PALETTE_DATA, b);
+}
+
+static void set_memclock(struct pm2fb_par* par, u32 clk)
+{
+	int i;
+	unsigned char m, n, p;
+
+	pm2_mnp(clk, &m, &n, &p);
+	WAIT_FIFO(par, 10);
+	pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6);
+	wmb();
+	pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m);
+	pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n);
+	wmb();
+	pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p);
+	wmb();
+	pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS);
+	rmb();
+	for (i = 256;
+	     i && !(pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED);
+	     i--)
+		;
+}
+
+static void set_pixclock(struct pm2fb_par* par, u32 clk)
+{
+	int i;
+	unsigned char m, n, p;
+
+	switch (par->type) {
+	case PM2_TYPE_PERMEDIA2:
+		pm2_mnp(clk, &m, &n, &p);
+		WAIT_FIFO(par, 8);
+		pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0);
+		wmb();
+		pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m);
+		pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n);
+		wmb();
+		pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p);
+		wmb();
+		pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS);
+		rmb();
+		for (i = 256;
+		     i && !(pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED);
+		     i--)
+			;
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		pm2v_mnp(clk/2, &m, &n, &p);
+		WAIT_FIFO(par, 8);
+		pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_CLK0_PRESCALE >> 8);
+		pm2v_RDAC_WR(par, PM2VI_RD_CLK0_PRESCALE, m);
+		pm2v_RDAC_WR(par, PM2VI_RD_CLK0_FEEDBACK, n);
+		pm2v_RDAC_WR(par, PM2VI_RD_CLK0_POSTSCALE, p);
+		pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0);
+		break;
+	}
+}
+
+static void set_video(struct pm2fb_par* p, u32 video) {
+	u32 tmp;
+	u32 vsync;
+
+	vsync = video;
+
+	DPRINTK("video = 0x%x\n", video);
+	
+	/*
+	 * The hardware cursor needs +vsync to recognise vert retrace.
+	 * We may not be using the hardware cursor, but the X Glint
+	 * driver may well. So always set +hsync/+vsync and then set
+	 * the RAMDAC to invert the sync if necessary.
+	 */
+	vsync &= ~(PM2F_HSYNC_MASK|PM2F_VSYNC_MASK);
+	vsync |= PM2F_HSYNC_ACT_HIGH|PM2F_VSYNC_ACT_HIGH;
+
+	WAIT_FIFO(p, 5);
+	pm2_WR(p, PM2R_VIDEO_CONTROL, vsync);
+
+	switch (p->type) {
+	case PM2_TYPE_PERMEDIA2:
+		tmp = PM2F_RD_PALETTE_WIDTH_8;
+		if ((video & PM2F_HSYNC_MASK) == PM2F_HSYNC_ACT_LOW)
+			tmp |= 4; /* invert hsync */
+		if ((video & PM2F_VSYNC_MASK) == PM2F_VSYNC_ACT_LOW)
+			tmp |= 8; /* invert vsync */
+		pm2_RDAC_WR(p, PM2I_RD_MISC_CONTROL, tmp);
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		tmp = 0;
+		if ((video & PM2F_HSYNC_MASK) == PM2F_HSYNC_ACT_LOW)
+			tmp |= 1; /* invert hsync */
+		if ((video & PM2F_VSYNC_MASK) == PM2F_VSYNC_ACT_LOW)
+			tmp |= 4; /* invert vsync */
+		pm2v_RDAC_WR(p, PM2VI_RD_SYNC_CONTROL, tmp);
+		pm2v_RDAC_WR(p, PM2VI_RD_MISC_CONTROL, 1);
+		break;
+	}
+}
+
+/*
+ *
+ */
+
+/**
+ *      pm2fb_check_var - Optional function. Validates a var passed in. 
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer 
+ *
+ *	Checks to see if the hardware supports the state requested by
+ *	var passed in.
+ *
+ *	Returns negative errno on error, or zero on success.
+ */
+static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	u32 lpitch;
+
+	if (var->bits_per_pixel != 8  && var->bits_per_pixel != 16 &&
+	    var->bits_per_pixel != 24 && var->bits_per_pixel != 32) {
+		DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (var->xres != var->xres_virtual) {
+		DPRINTK("virtual x resolution != physical x resolution not supported\n");
+		return -EINVAL;
+	}
+
+	if (var->yres > var->yres_virtual) {
+		DPRINTK("virtual y resolution < physical y resolution not possible\n");
+		return -EINVAL;
+	}
+
+	if (var->xoffset) {
+		DPRINTK("xoffset not supported\n");
+		return -EINVAL;
+	}
+
+	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		DPRINTK("interlace not supported\n");
+		return -EINVAL;
+	}
+
+	var->xres = (var->xres + 15) & ~15; /* could sometimes be 8 */
+	lpitch = var->xres * ((var->bits_per_pixel + 7)>>3);
+  
+	if (var->xres < 320 || var->xres > 1600) {
+		DPRINTK("width not supported: %u\n", var->xres);
+		return -EINVAL;
+	}
+  
+	if (var->yres < 200 || var->yres > 1200) {
+		DPRINTK("height not supported: %u\n", var->yres);
+		return -EINVAL;
+	}
+  
+	if (lpitch * var->yres_virtual > info->fix.smem_len) {
+		DPRINTK("no memory for screen (%ux%ux%u)\n",
+			var->xres, var->yres_virtual, var->bits_per_pixel);
+		return -EINVAL;
+	}
+  
+	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
+		DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	case 16:
+		var->red.offset   = 11;
+		var->red.length   = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset  = 0;
+		var->blue.length  = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		var->red.offset	  = 16;
+		var->green.offset = 8;
+		var->blue.offset  = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	case 24:
+#ifdef __BIG_ENDIAN
+		var->red.offset   = 0;
+		var->blue.offset  = 16;
+#else
+		var->red.offset   = 16;
+		var->blue.offset  = 0;
+#endif
+		var->green.offset = 8;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	}
+	var->height = var->width = -1;
+  
+	var->accel_flags = 0;	/* Can't mmap if this is on */
+	
+	DPRINTK("Checking graphics mode at %dx%d depth %d\n",
+		var->xres, var->yres, var->bits_per_pixel);
+	return 0;
+}
+
+/**
+ *      pm2fb_set_par - Alters the hardware state.
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Using the fb_var_screeninfo in fb_info we set the resolution of the
+ *	this particular framebuffer.
+ */
+static int pm2fb_set_par(struct fb_info *info)
+{
+	struct pm2fb_par *par = (struct pm2fb_par *) info->par;
+	u32 pixclock;
+	u32 width, height, depth;
+	u32 hsstart, hsend, hbend, htotal;
+	u32 vsstart, vsend, vbend, vtotal;
+	u32 stride;
+	u32 base;
+	u32 video = 0;
+	u32 clrmode = PM2F_RD_COLOR_MODE_RGB | PM2F_RD_GUI_ACTIVE;
+	u32 txtmap = 0;
+	u32 pixsize = 0;
+	u32 clrformat = 0;
+	u32 xres;
+	int data64;
+
+	reset_card(par);
+	reset_config(par);
+	clear_palette(par);
+	if ( par->memclock )
+		set_memclock(par, par->memclock);
+    
+	width = (info->var.xres_virtual + 7) & ~7;
+	height = info->var.yres_virtual;
+	depth = (info->var.bits_per_pixel + 7) & ~7;
+	depth = (depth > 32) ? 32 : depth;
+	data64 = depth > 8 || par->type == PM2_TYPE_PERMEDIA2V;
+
+	xres = (info->var.xres + 31) & ~31;
+	pixclock = PICOS2KHZ(info->var.pixclock);
+	if (pixclock > PM2_MAX_PIXCLOCK) {
+		DPRINTK("pixclock too high (%uKHz)\n", pixclock);
+		return -EINVAL;
+	}
+    
+	hsstart = to3264(info->var.right_margin, depth, data64);
+	hsend = hsstart + to3264(info->var.hsync_len, depth, data64);
+	hbend = hsend + to3264(info->var.left_margin, depth, data64);
+	htotal = to3264(xres, depth, data64) + hbend - 1;
+	vsstart = (info->var.lower_margin)
+		? info->var.lower_margin - 1
+		: 0;	/* FIXME! */
+	vsend = info->var.lower_margin + info->var.vsync_len - 1;
+	vbend = info->var.lower_margin + info->var.vsync_len + info->var.upper_margin;
+	vtotal = info->var.yres + vbend - 1;
+	stride = to3264(width, depth, 1);
+	base = to3264(info->var.yoffset * xres + info->var.xoffset, depth, 1);
+	if (data64)
+		video |= PM2F_DATA_64_ENABLE;
+    
+	if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) {
+		if (lowhsync) {
+			DPRINTK("ignoring +hsync, using -hsync.\n");
+			video |= PM2F_HSYNC_ACT_LOW;
+		} else
+			video |= PM2F_HSYNC_ACT_HIGH;
+	}
+	else
+		video |= PM2F_HSYNC_ACT_LOW;
+	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) {
+		if (lowvsync) {
+			DPRINTK("ignoring +vsync, using -vsync.\n");
+			video |= PM2F_VSYNC_ACT_LOW;
+		} else
+			video |= PM2F_VSYNC_ACT_HIGH;
+	}
+	else
+		video |= PM2F_VSYNC_ACT_LOW;
+	if ((info->var.vmode & FB_VMODE_MASK)==FB_VMODE_INTERLACED) {
+		DPRINTK("interlaced not supported\n");
+		return -EINVAL;
+	}
+	if ((info->var.vmode & FB_VMODE_MASK)==FB_VMODE_DOUBLE)
+		video |= PM2F_LINE_DOUBLE;
+	if ((info->var.activate & FB_ACTIVATE_MASK)==FB_ACTIVATE_NOW)
+		video |= PM2F_VIDEO_ENABLE;
+	par->video = video;
+
+	info->fix.visual =
+		(depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = info->var.xres * depth / 8;
+	info->cmap.len = 256;
+
+	/*
+	 * Settings calculated. Now write them out.
+	 */
+	if (par->type == PM2_TYPE_PERMEDIA2V) {
+		WAIT_FIFO(par, 1);
+		pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0);
+	}
+    
+	set_aperture(par, depth);
+    
+	mb();
+	WAIT_FIFO(par, 19);
+	pm2_RDAC_WR(par, PM2I_RD_COLOR_KEY_CONTROL,
+		    ( depth == 8 ) ? 0 : PM2F_COLOR_KEY_TEST_OFF);
+	switch (depth) {
+	case 8:
+		pm2_WR(par, PM2R_FB_READ_PIXEL, 0);
+		clrformat = 0x0e;
+		break;
+	case 16:
+		pm2_WR(par, PM2R_FB_READ_PIXEL, 1);
+		clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGB565;
+		txtmap = PM2F_TEXTEL_SIZE_16;
+		pixsize = 1;
+		clrformat = 0x70;
+		break;
+	case 32:
+		pm2_WR(par, PM2R_FB_READ_PIXEL, 2);
+		clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGBA8888;
+		txtmap = PM2F_TEXTEL_SIZE_32;
+		pixsize = 2;
+		clrformat = 0x20;
+		break;
+	case 24:
+		pm2_WR(par, PM2R_FB_READ_PIXEL, 4);
+		clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGB888;
+		txtmap = PM2F_TEXTEL_SIZE_24;
+		pixsize = 4;
+		clrformat = 0x20;
+		break;
+	}
+	pm2_WR(par, PM2R_FB_WRITE_MODE, PM2F_FB_WRITE_ENABLE);
+	pm2_WR(par, PM2R_FB_READ_MODE, partprod(xres));
+	pm2_WR(par, PM2R_LB_READ_MODE, partprod(xres));
+	pm2_WR(par, PM2R_TEXTURE_MAP_FORMAT, txtmap | partprod(xres));
+	pm2_WR(par, PM2R_H_TOTAL, htotal);
+	pm2_WR(par, PM2R_HS_START, hsstart);
+	pm2_WR(par, PM2R_HS_END, hsend);
+	pm2_WR(par, PM2R_HG_END, hbend);
+	pm2_WR(par, PM2R_HB_END, hbend);
+	pm2_WR(par, PM2R_V_TOTAL, vtotal);
+	pm2_WR(par, PM2R_VS_START, vsstart);
+	pm2_WR(par, PM2R_VS_END, vsend);
+	pm2_WR(par, PM2R_VB_END, vbend);
+	pm2_WR(par, PM2R_SCREEN_STRIDE, stride);
+	wmb();
+	pm2_WR(par, PM2R_WINDOW_ORIGIN, 0);
+	pm2_WR(par, PM2R_SCREEN_SIZE, (height << 16) | width);
+	pm2_WR(par, PM2R_SCISSOR_MODE, PM2F_SCREEN_SCISSOR_ENABLE);
+	wmb();
+	pm2_WR(par, PM2R_SCREEN_BASE, base);
+	wmb();
+	set_video(par, video);
+	WAIT_FIFO(par, 4);
+	switch (par->type) {
+	case PM2_TYPE_PERMEDIA2:
+		pm2_RDAC_WR(par, PM2I_RD_COLOR_MODE, clrmode);
+		break;
+	case PM2_TYPE_PERMEDIA2V:
+		pm2v_RDAC_WR(par, PM2VI_RD_PIXEL_SIZE, pixsize);
+		pm2v_RDAC_WR(par, PM2VI_RD_COLOR_FORMAT, clrformat);
+		break;
+	}
+	set_pixclock(par, pixclock);
+	DPRINTK("Setting graphics mode at %dx%d depth %d\n",
+		info->var.xres, info->var.yres, info->var.bits_per_pixel);
+	return 0;	
+}
+
+/**
+ *  	pm2fb_setcolreg - Sets a color register.
+ *      @regno: boolean, 0 copy local, 1 get_user() function
+ *      @red: frame buffer colormap structure
+ *	@green: The green value which can be up to 16 bits wide 
+ *	@blue:  The blue value which can be up to 16 bits wide.
+ *	@transp: If supported the alpha value which can be up to 16 bits wide.	
+ *      @info: frame buffer info structure
+ * 
+ *  	Set a single color register. The values supplied have a 16 bit
+ *  	magnitude which needs to be scaled in this function for the hardware.
+ *	Pretty much a direct lift from tdfxfb.c.
+ * 
+ *	Returns negative errno on error, or zero on success.
+ */
+static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info)
+{
+	struct pm2fb_par *par = (struct pm2fb_par *) info->par;
+
+	if (regno >= info->cmap.len)  /* no. of hw registers */
+		return 1;
+	/*
+	 * Program hardware... do anything you want with transp
+	 */
+
+	/* grayscale works only partially under directcolor */
+	if (info->var.grayscale) {
+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+	}
+
+	/* Directcolor:
+	 *   var->{color}.offset contains start of bitfield
+	 *   var->{color}.length contains length of bitfield
+	 *   {hardwarespecific} contains width of DAC
+	 *   cmap[X] is programmed to
+	 *   (X << red.offset) | (X << green.offset) | (X << blue.offset)
+	 *   RAMDAC[X] is programmed to (red, green, blue)
+	 *
+	 * Pseudocolor:
+	 *    uses offset = 0 && length = DAC register width.
+	 *    var->{color}.offset is 0
+	 *    var->{color}.length contains widht of DAC
+	 *    cmap is not used
+	 *    DAC[X] is programmed to (red, green, blue)
+	 * Truecolor:
+	 *    does not use RAMDAC (usually has 3 of them).
+	 *    var->{color}.offset contains start of bitfield
+	 *    var->{color}.length contains length of bitfield
+	 *    cmap is programmed to
+	 *    (red << red.offset) | (green << green.offset) |
+	 *    (blue << blue.offset) | (transp << transp.offset)
+	 *    RAMDAC does not exist
+	 */
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		red = CNVT_TOHW(red, info->var.red.length);
+		green = CNVT_TOHW(green, info->var.green.length);
+		blue = CNVT_TOHW(blue, info->var.blue.length);
+		transp = CNVT_TOHW(transp, info->var.transp.length);
+		break;
+	case FB_VISUAL_DIRECTCOLOR:
+		/* example here assumes 8 bit DAC. Might be different 
+		 * for your hardware */	
+		red = CNVT_TOHW(red, 8);       
+		green = CNVT_TOHW(green, 8);
+		blue = CNVT_TOHW(blue, 8);
+		/* hey, there is bug in transp handling... */
+		transp = CNVT_TOHW(transp, 8);
+		break;
+	}
+#undef CNVT_TOHW
+	/* Truecolor has hardware independent palette */
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+		u32 v;
+
+		if (regno >= 16)
+			return 1;
+
+		v = (red << info->var.red.offset) |
+			(green << info->var.green.offset) |
+			(blue << info->var.blue.offset) |
+			(transp << info->var.transp.offset);
+
+		switch (info->var.bits_per_pixel) {
+		case 8:
+			break;	
+   		case 16:
+		case 24:
+		case 32:	
+           		((u32*)(info->pseudo_palette))[regno] = v;
+			break;
+		}
+		return 0;
+	}
+	else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+		set_color(par, regno, red, green, blue);
+
+	return 0;
+}
+
+/**
+ *      pm2fb_pan_display - Pans the display.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Pan (or wrap, depending on the `vmode' field) the display using the
+ *  	`xoffset' and `yoffset' fields of the `var' structure.
+ *  	If the values don't fit, return -EINVAL.
+ *
+ *      Returns negative errno on error, or zero on success.
+ *
+ */
+static int pm2fb_pan_display(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct pm2fb_par *p = (struct pm2fb_par *) info->par;
+	u32 base;
+	u32 depth;
+	u32 xres;
+
+	xres = (var->xres + 31) & ~31;
+	depth = (var->bits_per_pixel + 7) & ~7;
+	depth = (depth > 32) ? 32 : depth;
+	base = to3264(var->yoffset * xres + var->xoffset, depth, 1);
+	WAIT_FIFO(p, 1);
+	pm2_WR(p, PM2R_SCREEN_BASE, base);    
+	return 0;
+}
+
+/**
+ *      pm2fb_blank - Blanks the display.
+ *      @blank_mode: the blank mode we want. 
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *      Blank the screen if blank_mode != 0, else unblank. Return 0 if
+ *      blanking succeeded, != 0 if un-/blanking failed due to e.g. a 
+ *      video mode which doesn't support it. Implements VESA suspend
+ *      and powerdown modes on hardware that supports disabling hsync/vsync:
+ *      blank_mode == 2: suspend vsync
+ *      blank_mode == 3: suspend hsync
+ *      blank_mode == 4: powerdown
+ *
+ *      Returns negative errno on error, or zero on success.
+ *
+ */
+static int pm2fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct pm2fb_par *par = (struct pm2fb_par *) info->par;
+	u32 video = par->video;
+
+	DPRINTK("blank_mode %d\n", blank_mode);
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		/* Screen: On */
+		video |= PM2F_VIDEO_ENABLE;
+		break;
+	case FB_BLANK_NORMAL:
+		/* Screen: Off */
+		video &= ~PM2F_VIDEO_ENABLE;
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		/* VSync: Off */
+		video &= ~(PM2F_VSYNC_MASK | PM2F_BLANK_LOW );
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		/* HSync: Off */
+		video &= ~(PM2F_HSYNC_MASK | PM2F_BLANK_LOW );
+		break;
+	case FB_BLANK_POWERDOWN:
+		/* HSync: Off, VSync: Off */
+		video &= ~(PM2F_VSYNC_MASK | PM2F_HSYNC_MASK| PM2F_BLANK_LOW);
+		break;
+	}
+	set_video(par, video);
+	return 0;
+}
+
+/* ------------ Hardware Independent Functions ------------ */
+
+/*
+ *  Frame buffer operations
+ */
+
+static struct fb_ops pm2fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pm2fb_check_var,
+	.fb_set_par	= pm2fb_set_par,
+	.fb_setcolreg	= pm2fb_setcolreg,
+	.fb_blank	= pm2fb_blank,
+	.fb_pan_display	= pm2fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_cursor	= soft_cursor,
+};
+
+/*
+ * PCI stuff
+ */
+
+
+/**
+ * Device initialisation
+ *
+ * Initialise and allocate resource for PCI device.
+ *
+ * @param	pdev	PCI device.
+ * @param	id	PCI device ID.
+ */
+static int __devinit pm2fb_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *id)
+{
+	struct pm2fb_par *default_par;
+	struct fb_info *info;
+	int size, err;
+	int err_retval = -ENXIO;
+
+	err = pci_enable_device(pdev);
+	if ( err ) {
+		printk(KERN_WARNING "pm2fb: Can't enable pdev: %d\n", err);
+		return err;
+	}
+
+	size = sizeof(struct pm2fb_par) + 256 * sizeof(u32);
+	info = framebuffer_alloc(size, &pdev->dev);
+	if ( !info )
+		return -ENOMEM;
+	default_par = (struct pm2fb_par *) info->par;
+
+	switch (pdev->device) {
+	case  PCI_DEVICE_ID_TI_TVP4020:
+		strcpy(pm2fb_fix.id, "TVP4020");
+		default_par->type = PM2_TYPE_PERMEDIA2;
+		break;
+	case  PCI_DEVICE_ID_3DLABS_PERMEDIA2:
+		strcpy(pm2fb_fix.id, "Permedia2");
+		default_par->type = PM2_TYPE_PERMEDIA2;
+		break;
+	case  PCI_DEVICE_ID_3DLABS_PERMEDIA2V:
+		strcpy(pm2fb_fix.id, "Permedia2v");
+		default_par->type = PM2_TYPE_PERMEDIA2V;
+		break;
+	}
+
+	pm2fb_fix.mmio_start = pci_resource_start(pdev, 0);
+	pm2fb_fix.mmio_len = PM2_REGS_SIZE;
+
+#if defined(__BIG_ENDIAN)
+	/*
+	 * PM2 has a 64k register file, mapped twice in 128k. Lower
+	 * map is little-endian, upper map is big-endian.
+	 */
+	pm2fb_fix.mmio_start += PM2_REGS_SIZE;
+	DPRINTK("Adjusting register base for big-endian.\n");
+#endif
+	DPRINTK("Register base at 0x%lx\n", pm2fb_fix.mmio_start);
+    
+	/* Registers - request region and map it. */
+	if ( !request_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len,
+				 "pm2fb regbase") ) {
+		printk(KERN_WARNING "pm2fb: Can't reserve regbase.\n");
+		goto err_exit_neither;
+	}
+	default_par->v_regs =
+		ioremap_nocache(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
+	if ( !default_par->v_regs ) {
+		printk(KERN_WARNING "pm2fb: Can't remap %s register area.\n",
+		       pm2fb_fix.id);
+		release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
+		goto err_exit_neither;
+	}
+
+	/* Stash away memory register info for use when we reset the board */
+	default_par->mem_control = pm2_RD(default_par, PM2R_MEM_CONTROL);
+	default_par->boot_address = pm2_RD(default_par, PM2R_BOOT_ADDRESS);
+	default_par->mem_config = pm2_RD(default_par, PM2R_MEM_CONFIG);
+	DPRINTK("MemControl 0x%x BootAddress 0x%x MemConfig 0x%x\n",
+		default_par->mem_control, default_par->boot_address,
+		default_par->mem_config);
+
+	/* Now work out how big lfb is going to be. */
+	switch(default_par->mem_config & PM2F_MEM_CONFIG_RAM_MASK) {
+	case PM2F_MEM_BANKS_1:
+		default_par->fb_size=0x200000;
+		break;
+	case PM2F_MEM_BANKS_2:
+		default_par->fb_size=0x400000;
+		break;
+	case PM2F_MEM_BANKS_3:
+		default_par->fb_size=0x600000;
+		break;
+	case PM2F_MEM_BANKS_4:
+		default_par->fb_size=0x800000;
+		break;
+	}
+	default_par->memclock = CVPPC_MEMCLOCK;
+	pm2fb_fix.smem_start = pci_resource_start(pdev, 1);
+	pm2fb_fix.smem_len = default_par->fb_size;
+
+	/* Linear frame buffer - request region and map it. */
+	if ( !request_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len,
+				 "pm2fb smem") ) {
+		printk(KERN_WARNING "pm2fb: Can't reserve smem.\n");
+		goto err_exit_mmio;
+	}
+	info->screen_base = default_par->v_fb =
+		ioremap_nocache(pm2fb_fix.smem_start, pm2fb_fix.smem_len);
+	if ( !default_par->v_fb ) {
+		printk(KERN_WARNING "pm2fb: Can't ioremap smem area.\n");
+		release_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len);
+		goto err_exit_mmio;
+	}
+
+	info->fbops		= &pm2fb_ops;
+	info->fix		= pm2fb_fix; 	
+	info->pseudo_palette	= (void *)(default_par + 1); 
+	info->flags		= FBINFO_DEFAULT |
+                                  FBINFO_HWACCEL_YPAN;
+
+	if (!mode)
+		mode = "640x480@60";
+	 
+	err = fb_find_mode(&info->var, info, mode, NULL, 0, NULL, 8); 
+	if (!err || err == 4)
+		info->var = pm2fb_var;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
+		goto err_exit_all;
+
+	if (register_framebuffer(info) < 0)
+		goto err_exit_both;
+
+	printk(KERN_INFO "fb%d: %s frame buffer device, memory = %dK.\n",
+	       info->node, info->fix.id, default_par->fb_size / 1024);
+
+	/*
+	 * Our driver data
+	 */
+	pci_set_drvdata(pdev, info);
+
+	return 0;
+
+ err_exit_all:
+	fb_dealloc_cmap(&info->cmap);	
+ err_exit_both:    
+	iounmap(info->screen_base);
+	release_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len);
+ err_exit_mmio:
+	iounmap(default_par->v_regs);
+	release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
+ err_exit_neither:
+	framebuffer_release(info);
+	return err_retval;
+}
+
+/**
+ * Device removal.
+ *
+ * Release all device resources.
+ *
+ * @param	pdev	PCI device to clean up.
+ */
+static void __devexit pm2fb_remove(struct pci_dev *pdev)
+{
+	struct fb_info* info = pci_get_drvdata(pdev);
+	struct fb_fix_screeninfo* fix = &info->fix;
+	struct pm2fb_par *par = info->par;
+
+	unregister_framebuffer(info);
+    
+	iounmap(info->screen_base);
+	release_mem_region(fix->smem_start, fix->smem_len);
+	iounmap(par->v_regs);
+	release_mem_region(fix->mmio_start, fix->mmio_len);
+
+	pci_set_drvdata(pdev, NULL);
+	kfree(info);
+}
+
+static struct pci_device_id pm2fb_id_table[] = {
+	{ PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TVP4020,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+	  0xff0000, 0 },
+	{ PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+	  0xff0000, 0 },
+	{ PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+	  0xff0000, 0 },
+	{ 0, }
+};
+
+static struct pci_driver pm2fb_driver = {
+	.name		= "pm2fb",
+	.id_table 	= pm2fb_id_table,
+	.probe 		= pm2fb_probe,
+	.remove 	= __devexit_p(pm2fb_remove),
+};
+
+MODULE_DEVICE_TABLE(pci, pm2fb_id_table);
+
+
+#ifndef MODULE
+/**
+ * Parse user speficied options.
+ *
+ * This is, comma-separated options following `video=pm2fb:'.
+ */
+static int __init pm2fb_setup(char *options)
+{
+	char* this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {	
+		if (!*this_opt)
+			continue;
+		if(!strcmp(this_opt, "lowhsync")) {
+			lowhsync = 1;
+		} else if(!strcmp(this_opt, "lowvsync")) {
+			lowvsync = 1;
+		} else {
+			mode = this_opt;
+		}
+	}
+	return 0;
+}
+#endif
+
+
+static int __init pm2fb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("pm2fb", &option))
+		return -ENODEV;
+	pm2fb_setup(option);
+#endif
+
+	return pci_register_driver(&pm2fb_driver);
+}
+
+module_init(pm2fb_init);
+
+#ifdef MODULE
+/*
+ *  Cleanup
+ */
+
+static void __exit pm2fb_exit(void)
+{
+	pci_unregister_driver(&pm2fb_driver);
+}
+#endif
+
+#ifdef MODULE
+module_exit(pm2fb_exit);
+
+module_param(mode, charp, 0);
+MODULE_PARM_DESC(mode, "Preferred video mode e.g. '648x480-8@60'");
+module_param(lowhsync, bool, 0);
+MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
+module_param(lowvsync, bool, 0);
+MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+
+MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
+MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
+MODULE_LICENSE("GPL");
+#endif