Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 3.10.

  Wierd bits:
   - OMAP drm changes required OMAP dss changes, in drivers/video, so I
     took them in here.
   - one more fbcon fix for font handover
   - VT switch avoidance in pm code
   - scatterlist helpers for gpu drivers - have acks from akpm

  Highlights:
   - qxl kms driver - driver for the spice qxl virtual GPU

  Nouveau:
   - fermi/kepler VRAM compression
   - GK110/nvf0 modesetting support.

  Tegra:
   - host1x core merged with 2D engine support

  i915:
   - vt switchless resume
   - more valleyview support
   - vblank fixes
   - modesetting pipe config rework

  radeon:
   - UVD engine support
   - SI chip tiling support
   - GPU registers initialisation from golden values.

  exynos:
   - device tree changes
   - fimc block support

  Otherwise:
   - bunches of fixes all over the place."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
  qxl: update to new idr interfaces.
  drm/nouveau: fix build with nv50->nvc0
  drm/radeon: fix handling of v6 power tables
  drm/radeon: clarify family checks in pm table parsing
  drm/radeon: consolidate UVD clock programming
  drm/radeon: fix UPLL_REF_DIV_MASK definition
  radeon: add bo tracking debugfs
  drm/radeon: add new richland pci ids
  drm/radeon: add some new SI PCI ids
  drm/radeon: fix scratch reg handling for UVD fence
  drm/radeon: allocate SA bo in the requested domain
  drm/radeon: fix possible segfault when parsing pm tables
  drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
  OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  OMAPDSS: VENC: Add error handling for venc_probe_pdata
  OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
  OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  OMAPDSS: SDI: Add error handling for sdi_probe_pdata
  OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  ...

1 files changed, 43 insertions, 92 deletions

diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index c4e9c2b1b465..20c3cd91ff9b 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -19,10 +19,11 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/backlight.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
 #define LCD_XRES		800
 #define LCD_YRES		480
@@ -32,10 +33,6 @@
  */
 #define LCD_PIXEL_CLOCK		23800
 
-struct nec_8048_data {
-	struct backlight_device *bl;
-};
-
 static const struct {
 	unsigned char addr;
 	unsigned char dat;
@@ -84,93 +81,47 @@ static struct omap_video_timings nec_8048_panel_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
 };
 
-static int nec_8048_bl_update_status(struct backlight_device *bl)
-{
-	struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
-	int level;
-
-	if (!dssdev->set_backlight)
-		return -EINVAL;
-
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		level = bl->props.brightness;
-	else
-		level = 0;
-
-	return dssdev->set_backlight(dssdev, level);
-}
-
-static int nec_8048_bl_get_brightness(struct backlight_device *bl)
+static inline struct panel_nec_nl8048_data
+*get_panel_data(const struct omap_dss_device *dssdev)
 {
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		return bl->props.brightness;
-
-	return 0;
+	return (struct panel_nec_nl8048_data *) dssdev->data;
 }
 
-static const struct backlight_ops nec_8048_bl_ops = {
-	.get_brightness	= nec_8048_bl_get_brightness,
-	.update_status	= nec_8048_bl_update_status,
-};
-
 static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
 {
-	struct backlight_device *bl;
-	struct nec_8048_data *necd;
-	struct backlight_properties props;
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 	int r;
 
-	dssdev->panel.timings = nec_8048_panel_timings;
-
-	necd = kzalloc(sizeof(*necd), GFP_KERNEL);
-	if (!necd)
-		return -ENOMEM;
-
-	dev_set_drvdata(&dssdev->dev, necd);
+	if (!pd)
+		return -EINVAL;
 
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 255;
+	dssdev->panel.timings = nec_8048_panel_timings;
 
-	bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
-			&nec_8048_bl_ops, &props);
-	if (IS_ERR(bl)) {
-		r = PTR_ERR(bl);
-		kfree(necd);
-		return r;
+	if (gpio_is_valid(pd->qvga_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->qvga_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
+		if (r)
+			return r;
 	}
-	necd->bl = bl;
-
-	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.power = FB_BLANK_UNBLANK;
-	bl->props.max_brightness = dssdev->max_backlight_level;
-	bl->props.brightness = dssdev->max_backlight_level;
 
-	r = nec_8048_bl_update_status(bl);
-	if (r < 0)
-		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+	if (gpio_is_valid(pd->res_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->res_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RES");
+		if (r)
+			return r;
+	}
 
 	return 0;
 }
 
 static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
-
-	bl->props.power = FB_BLANK_POWERDOWN;
-	nec_8048_bl_update_status(bl);
-	backlight_device_unregister(bl);
-
-	kfree(necd);
 }
 
 static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 {
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 	int r;
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
@@ -182,36 +133,24 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
-	r = nec_8048_bl_update_status(bl);
-	if (r < 0)
-		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+	if (gpio_is_valid(pd->res_gpio))
+		gpio_set_value_cansleep(pd->res_gpio, 1);
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
+
 err0:
 	return r;
 }
 
 static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
 {
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	bl->props.brightness = 0;
-	nec_8048_bl_update_status(bl);
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	if (gpio_is_valid(pd->res_gpio))
+		gpio_set_value_cansleep(pd->res_gpio, 0);
 
 	omapdss_dpi_display_disable(dssdev);
 }
@@ -303,16 +242,22 @@ static int nec_8048_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
-static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+
+static int nec_8048_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	nec_8048_spi_send(spi, 2, 0x01);
 	mdelay(40);
 
 	return 0;
 }
 
-static int nec_8048_spi_resume(struct spi_device *spi)
+static int nec_8048_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	/* reinitialize the panel */
 	spi_setup(spi);
 	nec_8048_spi_send(spi, 2, 0x00);
@@ -321,14 +266,20 @@ static int nec_8048_spi_resume(struct spi_device *spi)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(nec_8048_spi_pm_ops, nec_8048_spi_suspend,
+		nec_8048_spi_resume);
+#define NEC_8048_SPI_PM_OPS (&nec_8048_spi_pm_ops)
+#else
+#define NEC_8048_SPI_PM_OPS NULL
+#endif
+
 static struct spi_driver nec_8048_spi_driver = {
 	.probe		= nec_8048_spi_probe,
 	.remove		= nec_8048_spi_remove,
-	.suspend	= nec_8048_spi_suspend,
-	.resume		= nec_8048_spi_resume,
 	.driver		= {
 		.name	= "nec_8048_spi",
 		.owner	= THIS_MODULE,
+		.pm	= NEC_8048_SPI_PM_OPS,
 	},
 };