diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-29 18:43:16 +0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-29 18:43:16 +0400 |
commit | 78283dd29e647775cb1e63a4d6554b3090b9a9ff (patch) | |
tree | 46a179781ed356c0546379ecc46ca5daed7ae50a /drivers/usb | |
parent | 435932f2c75efcdd07273a437b9be32647d56d73 (diff) | |
parent | 5ae90d8e467e625e447000cb4335c4db973b1095 (diff) | |
download | linux-78283dd29e647775cb1e63a4d6554b3090b9a9ff.tar.xz |
Merge 3.11-rc3 into usb-next
Diffstat (limited to 'drivers/usb')
31 files changed, 161 insertions, 68 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f735f6bc929c..91a0e84a68cd 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -668,6 +668,15 @@ resubmit: static inline int hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) { + /* Need to clear both directions for control ep */ + if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) { + int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_CLEAR_TT_BUFFER, USB_RT_PORT, + devinfo ^ 0x8000, tt, NULL, 0, 1000); + if (status) + return status; + } return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, tt, NULL, 0, 1000); @@ -2847,6 +2856,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) USB_CTRL_SET_TIMEOUT); } +/* Count of wakeup-enabled devices at or below udev */ +static unsigned wakeup_enabled_descendants(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + + return udev->do_remote_wakeup + + (hub ? hub->wakeup_enabled_descendants : 0); +} + /* * usb_port_suspend - suspend a usb device's upstream port * @udev: device that's no longer in active use, not a root hub @@ -2887,8 +2905,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. * - * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get - * suspended only when their bus goes into global suspend (i.e., the root + * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get + * suspended until their bus goes into global suspend (i.e., the root * hub is suspended). Nevertheless, we change @udev->state to * USB_STATE_SUSPENDED as this is the device's "logical" state. The actual * upstream port setting is stored in @udev->port_is_suspended. @@ -2959,15 +2977,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3); - else if (PMSG_IS_AUTO(msg)) - status = set_port_feature(hub->hdev, port1, - USB_PORT_FEAT_SUSPEND); + /* * For system suspend, we do not need to enable the suspend feature * on individual USB-2 ports. The devices will automatically go * into suspend a few ms after the root hub stops sending packets. * The USB 2.0 spec calls this "global suspend". + * + * However, many USB hubs have a bug: They don't relay wakeup requests + * from a downstream port if the port's suspend feature isn't on. + * Therefore we will turn on the suspend feature if udev or any of its + * descendants is enabled for remote wakeup. */ + else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0) + status = set_port_feature(hub->hdev, port1, + USB_PORT_FEAT_SUSPEND); else { really_suspend = false; status = 0; @@ -3002,15 +3026,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) if (!PMSG_IS_AUTO(msg)) status = 0; } else { - /* device has up to 10 msec to fully suspend */ dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n", (PMSG_IS_AUTO(msg) ? "auto-" : ""), udev->do_remote_wakeup); - usb_set_device_state(udev, USB_STATE_SUSPENDED); if (really_suspend) { udev->port_is_suspended = 1; + + /* device has up to 10 msec to fully suspend */ msleep(10); } + usb_set_device_state(udev, USB_STATE_SUSPENDED); } /* @@ -3290,7 +3315,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) unsigned port1; int status; - /* Warn if children aren't already suspended */ + /* + * Warn if children aren't already suspended. + * Also, add up the number of wakeup-enabled descendants. + */ + hub->wakeup_enabled_descendants = 0; for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; @@ -3300,6 +3329,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) if (PMSG_IS_AUTO(msg)) return -EBUSY; } + if (udev) + hub->wakeup_enabled_descendants += + wakeup_enabled_descendants(udev); } if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 6508e02b3dac..4e4790dea343 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -59,6 +59,9 @@ struct usb_hub { struct usb_tt tt; /* Transaction Translator */ unsigned mA_per_port; /* current for each child */ +#ifdef CONFIG_PM + unsigned wakeup_enabled_descendants; +#endif unsigned limited_power:1; unsigned quiescing:1; diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 757aa18027d0..2378958ea63e 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,6 +1,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" - depends on (USB || USB_GADGET) && GENERIC_HARDIRQS + depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c35d49d39b76..358375e0b291 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -450,7 +450,7 @@ static int dwc3_probe(struct platform_device *pdev) } if (IS_ERR(dwc->usb3_phy)) { - ret = PTR_ERR(dwc->usb2_phy); + ret = PTR_ERR(dwc->usb3_phy); /* * if -ENXIO is returned, it means PHY layer wasn't diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index b69d322e3cab..27dad993b007 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -759,8 +759,8 @@ struct dwc3 { struct dwc3_event_type { u32 is_devspec:1; - u32 type:6; - u32 reserved8_31:25; + u32 type:7; + u32 reserved8_31:24; } __packed; #define DWC3_DEPEVT_XFERCOMPLETE 0x01 diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index b5e5b35df49c..f77083fedc68 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1584,6 +1584,7 @@ err1: __dwc3_gadget_ep_disable(dwc->eps[0]); err0: + dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); return ret; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 62f6802f6e0f..8e9368330b10 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -193,6 +193,7 @@ config USB_FUSB300 Faraday usb device controller FUSB300 driver config USB_FOTG210_UDC + depends on HAS_DMA tristate "Faraday FOTG210 USB Peripheral Controller" help Faraday USB2.0 OTG controller which can be configured as @@ -328,13 +329,14 @@ config USB_S3C_HSUDC config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" - depends on GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS && HAS_DMA help Marvell Socs (including PXA and MMP series) include a high speed USB2.0 OTG controller, which can be configured as high speed or full speed USB peripheral. config USB_MV_U3D + depends on HAS_DMA tristate "MARVELL PXA2128 USB 3.0 controller" help MARVELL PXA2128 Processor series include a super speed USB3.0 device @@ -639,6 +641,7 @@ config USB_CONFIGFS_RNDIS depends on USB_CONFIGFS depends on NET select USB_U_ETHER + select USB_U_RNDIS select USB_F_RNDIS help Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 073b938f9135..d9a6add0c852 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -870,8 +870,8 @@ static void clk_on(struct at91_udc *udc) if (udc->clocked) return; udc->clocked = 1; - clk_enable(udc->iclk); - clk_enable(udc->fclk); + clk_prepare_enable(udc->iclk); + clk_prepare_enable(udc->fclk); } static void clk_off(struct at91_udc *udc) @@ -880,8 +880,8 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable(udc->fclk); - clk_disable(udc->iclk); + clk_disable_unprepare(udc->fclk); + clk_disable_unprepare(udc->iclk); } /* @@ -1725,7 +1725,7 @@ static int at91udc_probe(struct platform_device *pdev) /* init software state */ udc = &controller; udc->gadget.dev.parent = dev; - if (pdev->dev.of_node) + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) at91udc_of_init(udc, pdev->dev.of_node); else memcpy(&udc->board, dev->platform_data, @@ -1782,12 +1782,14 @@ static int at91udc_probe(struct platform_device *pdev) } /* don't do anything until we have both gadget driver and VBUS */ - clk_enable(udc->iclk); + retval = clk_prepare_enable(udc->iclk); + if (retval) + goto fail1; at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff); /* Clear all pending interrupts - UDP may be used by bootloader. */ at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff); - clk_disable(udc->iclk); + clk_disable_unprepare(udc->iclk); /* request UDC and maybe VBUS irqs */ udc->udp_irq = platform_get_irq(pdev, 0); diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 5d3561ea1c15..edab45da3741 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -959,8 +959,11 @@ static struct usb_function_instance *ecm_alloc_inst(void) mutex_init(&opts->lock); opts->func_inst.free_func_inst = ecm_free_inst; opts->net = gether_setup_default(); - if (IS_ERR(opts->net)) - return ERR_PTR(PTR_ERR(opts->net)); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type); diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 90ee8022e8d8..d00392d879db 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -593,8 +593,11 @@ static struct usb_function_instance *eem_alloc_inst(void) mutex_init(&opts->lock); opts->func_inst.free_func_inst = eem_free_inst; opts->net = gether_setup_default(); - if (IS_ERR(opts->net)) - return ERR_CAST(opts->net); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type); diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index 952177f7eb9b..1c28fe13328a 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -1350,8 +1350,11 @@ static struct usb_function_instance *ncm_alloc_inst(void) mutex_init(&opts->lock); opts->func_inst.free_func_inst = ncm_free_inst; opts->net = gether_setup_default(); - if (IS_ERR(opts->net)) - return ERR_PTR(PTR_ERR(opts->net)); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type); diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 7944fb0efe3b..1bf26e9f38cd 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -656,8 +656,11 @@ static struct usb_function_instance *phonet_alloc_inst(void) opts->func_inst.free_func_inst = phonet_free_inst; opts->net = gphonet_setup_default(); - if (IS_ERR(opts->net)) - return ERR_PTR(PTR_ERR(opts->net)); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &phonet_func_type); diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 191df35ae69d..717ed7f95639 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -963,8 +963,11 @@ static struct usb_function_instance *rndis_alloc_inst(void) mutex_init(&opts->lock); opts->func_inst.free_func_inst = rndis_free_inst; opts->net = gether_setup_default(); - if (IS_ERR(opts->net)) - return ERR_CAST(opts->net); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &rndis_func_type); diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 5601e1d96c4f..7c8674fa7e80 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -505,8 +505,11 @@ static struct usb_function_instance *geth_alloc_inst(void) mutex_init(&opts->lock); opts->func_inst.free_func_inst = geth_free_inst; opts->net = gether_setup_default(); - if (IS_ERR(opts->net)) - return ERR_CAST(opts->net); + if (IS_ERR(opts->net)) { + struct net_device *net = opts->net; + kfree(opts); + return ERR_CAST(net); + } config_group_init_type_name(&opts->func_inst.group, "", &gether_func_type); diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c index cce5535b1dc6..10cd18ddd0d4 100644 --- a/drivers/usb/gadget/fotg210-udc.c +++ b/drivers/usb/gadget/fotg210-udc.c @@ -1074,7 +1074,7 @@ static struct usb_gadget_ops fotg210_gadget_ops = { .udc_stop = fotg210_udc_stop, }; -static int __exit fotg210_udc_remove(struct platform_device *pdev) +static int fotg210_udc_remove(struct platform_device *pdev) { struct fotg210_udc *fotg210 = dev_get_drvdata(&pdev->dev); @@ -1088,7 +1088,7 @@ static int __exit fotg210_udc_remove(struct platform_device *pdev) return 0; } -static int __init fotg210_udc_probe(struct platform_device *pdev) +static int fotg210_udc_probe(struct platform_device *pdev) { struct resource *res, *ires; struct fotg210_udc *fotg210 = NULL; diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index 07fdb3eaf48a..ec6a2d290398 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -1776,7 +1776,7 @@ static int mv_u3d_remove(struct platform_device *dev) kfree(u3d->eps); if (u3d->irq) - free_irq(u3d->irq, &dev->dev); + free_irq(u3d->irq, u3d); if (u3d->cap_regs) iounmap(u3d->cap_regs); @@ -1974,7 +1974,7 @@ static int mv_u3d_probe(struct platform_device *dev) return 0; err_unregister: - free_irq(u3d->irq, &dev->dev); + free_irq(u3d->irq, u3d); err_request_irq: err_get_irq: kfree(u3d->status_req); diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index ffd8fa541101..c28ac9872030 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -50,6 +50,8 @@ static DEFINE_MUTEX(udc_lock); /* ------------------------------------------------------------------------- */ +#ifdef CONFIG_HAS_DMA + int usb_gadget_map_request(struct usb_gadget *gadget, struct usb_request *req, int is_in) { @@ -99,6 +101,8 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget, } EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); +#endif /* CONFIG_HAS_DMA */ + /* ------------------------------------------------------------------------- */ void usb_gadget_set_state(struct usb_gadget *gadget, @@ -194,9 +198,11 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, dev_set_name(&gadget->dev, "gadget"); gadget->dev.parent = parent; +#ifdef CONFIG_HAS_DMA dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask); gadget->dev.dma_parms = parent->dma_parms; gadget->dev.dma_mask = parent->dma_mask; +#endif if (release) gadget->dev.release = release; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2b702772d04d..6dce37555c4f 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -874,6 +874,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); usb_hcd_start_port_resume(&hcd->self, wIndex); + set_bit(wIndex, &ehci->resuming_ports); /* check the port again */ mod_timer(&ehci_to_hcd(ehci)->rh_timer, ehci->reset_done[wIndex]); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 0a5e0fb8f466..ed6700d00fe6 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -12,6 +12,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); #else +struct pci_dev; static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 475e06e10a77..72960684a942 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -93,7 +93,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { - xhci->quirks |= XHCI_SPURIOUS_SUCCESS; xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1e57eafa6910..5b08cd85f8e7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -434,7 +434,7 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, /* A ring has pending URBs if its TD list is not empty */ if (!(ep->ep_state & EP_HAS_STREAMS)) { - if (!(list_empty(&ep->ring->td_list))) + if (ep->ring && !(list_empty(&ep->ring->td_list))) xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0); return; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 87b5e6581359..c8d7199eefa0 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -329,7 +329,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) return; } -static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) +static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci) { int i; @@ -1181,9 +1181,6 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, } xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_HALTED) - return -ENODEV; - if (check_virt_dev) { if (!udev->slot_id || !xhci->devs[udev->slot_id]) { printk(KERN_DEBUG "xHCI %s called with unaddressed " @@ -1199,6 +1196,9 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, } } + if (xhci->xhc_state & XHCI_STATE_HALTED) + return -ENODEV; + return 1; } @@ -3898,7 +3898,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) * Issue an Evaluate Context command to change the Maximum Exit Latency in the * slot context. If that succeeds, store the new MEL in the xhci_virt_device. */ -static int xhci_change_max_exit_latency(struct xhci_hcd *xhci, +static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci, struct usb_device *udev, u16 max_exit_latency) { struct xhci_virt_device *virt_dev; @@ -4892,6 +4892,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) get_quirks(dev, xhci); + /* In xhci controllers which follow xhci 1.0 spec gives a spurious + * success event after a short transfer. This quirk will ignore such + * spurious event. + */ + if (xhci->hci_version > 0x96) + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index c21386ec5d35..de98906f786d 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3247,6 +3247,7 @@ static const struct usb_device_id sisusb_table[] = { { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x0711, 0x0920) }, + { USB_DEVICE(0x0711, 0x0950) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c index efe6e1464f45..a2fb30bbb971 100644 --- a/drivers/usb/phy/phy-omap-usb3.c +++ b/drivers/usb/phy/phy-omap-usb3.c @@ -71,9 +71,9 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { {1250, 5, 4, 20, 0}, /* 12 MHz */ {3125, 20, 4, 20, 0}, /* 16.8 MHz */ {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1000, 7, 4, 10, 0}, /* 20 MHz */ {1250, 12, 4, 20, 0}, /* 26 MHz */ {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ - {1000, 7, 4, 10, 0}, /* 20 MHz */ }; diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index 1011c16ade7e..758b86d0fcb3 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -388,7 +388,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) clk = devm_clk_get(dev, "otg"); if (IS_ERR(clk)) { - dev_err(dev, "Failed to get otg clock\n"); + dev_err(dev, "Failed to get usbhost/otg clock\n"); return PTR_ERR(clk); } diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ed4949faa70d..805940c37353 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -855,10 +855,6 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget, struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); - if (!driver || - !driver->unbind) - return -EINVAL; - usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); gpriv->driver = NULL; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 5627058964d5..6987b535aa98 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ + { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ @@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ @@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index dff27e6b677a..e31d52aa78c9 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -904,20 +904,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Spreg failed\n"); - return -1; + goto err; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } /* End of block to be checked */ @@ -926,7 +926,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Controlreg failed\n"); - return -1; + goto err; } Data |= 0x08; /* Driver done bit */ Data |= 0x20; /* rx_disable */ @@ -934,7 +934,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->ControlRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Controlreg failed\n"); - return -1; + goto err; } /* do register settings here */ /* Set all regs to the device default values. */ @@ -945,21 +945,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "disabling interrupts failed\n"); - return -1; + goto err; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0x03; @@ -1099,6 +1099,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* mos7840_change_port_settings(mos7840_port,old_termios); */ return 0; +err: + for (j = 0; j < NUM_URBS; ++j) { + urb = mos7840_port->write_urb_pool[j]; + if (!urb) + continue; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + return status; } /***************************************************************************** diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dd857de05b0..1cf6f125f5f0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb); #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 #define OLIVETTI_PRODUCT_OLICARD145 0xc003 +#define OLIVETTI_PRODUCT_OLICARD200 0xc005 /* Celot products */ #define CELOT_VENDOR_ID 0x211f #define CELOT_PRODUCT_CT680M 0x6801 -/* ONDA Communication vendor id */ -#define ONDA_VENDOR_ID 0x1ee8 - -/* ONDA MT825UP HSDPA 14.2 modem */ -#define ONDA_MT825UP 0x000b - /* Samsung products */ #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 @@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb); /* Hyundai Petatel Inc. products */ #define PETATEL_VENDOR_ID 0x1ff4 -#define PETATEL_PRODUCT_NP10T 0x600e +#define PETATEL_PRODUCT_NP10T_600A 0x600a +#define PETATEL_PRODUCT_NP10T_600E 0x600e /* TP-LINK Incorporated products */ #define TPLINK_VENDOR_ID 0x2357 @@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, @@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, @@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ - { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, @@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, - { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) }, { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ @@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 5585b20397fb..5c07d55ece7a 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -309,7 +309,7 @@ static int ti_startup(struct usb_serial *serial) usb_set_serial_data(serial, tdev); /* determine device type */ - if (usb_match_id(serial->interface, ti_id_table_3410)) + if (serial->type == &ti_1port_device) tdev->td_is_3410 = 1; dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, tdev->td_is_3410 ? "3410" : "5052"); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1799335288bd..c015f2c16729 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -665,6 +665,13 @@ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */ +UNUSUAL_DEV( 0x054c, 0x02a5, 0x0100, 0x0100, + "Sony Corp.", + "MicroVault Flash Drive", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_READ_CAPACITY_16 ), + /* floppy reports multiple luns */ UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, "SAMSUNG", |