USB: net2272: driver for PLX NET2272 USB device controller

This is based on the last release from PLX:
	http://www.plxtech.com/files/products/net2000/software/selectiontool/RE061204-net2272-linux2.6.18.tgz

I've managed to contact them and they've confirmed that this driver was
wholly written by PLX (Seth Levy).  While they have no problem with it
being merged (and they've already licensed it as GPL), they don't have
any interest in doing so themselves as this is an old part for them.

ADI has long had an add-on card which has this part on it, so we've been
keeping it up-to-date out of tree.  But now that PLX has confirmed the
source of the driver, we can can take the next step of cleaning it up and
getting it merged.

So here we are!  I've done quite a large clean up of the driver and
attempted to address all the common issues.  Hopefully in the process,
I haven't broken anything.  While it seems to still work with the board
that I have access to, it is not a PCI variant.  So I have not tested
any of the PCI logic myself (beyond clean compile).  Perhaps someone who
actually has a card and cares can do so.

I'll try to address further feedback, but don't expect miracles.  I'm
not really familiar with the part itself, just the platform glue.

Signed-off-by: Seth Levy <seth.levy@plxtech.com>
Signed-off-by: Ash Aziz <ash.aziz@plxtech.com>
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 3357 insertions, 0 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 58456d1aec21..be44545d6809 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -480,6 +480,35 @@ config USB_CI13XXX_PCI
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_NET2272
+	boolean "PLX NET2272"
+	select USB_GADGET_DUALSPEED
+	help
+	  PLX NET2272 is a USB peripheral controller which supports
+	  both full and high speed USB 2.0 data transfers.
+
+	  It has three configurable endpoints, as well as endpoint zero
+	  (for control transfer).
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "net2272" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_GADGET_NET2272_DMA
+	boolean "Support external DMA controller"
+	depends on USB_GADGET_NET2272
+	help
+	  The NET2272 part can optionally support an external DMA
+	  controller, but your board has to have support in the
+	  driver itself.
+
+	  If unsure, say "N" here.  The driver works fine in PIO mode.
+
+config USB_NET2272
+	tristate
+	depends on USB_GADGET_NET2272
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_NET2280
 	boolean "NetChip 228x"
 	depends on PCI
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 4fe92b18a055..345261738b13 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -4,6 +4,7 @@
 ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
+obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
 obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc.o
 obj-$(CONFIG_USB_PXA25X)	+= pxa25x_udc.o
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index bcdac7c73e89..13c2f9e94405 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -15,6 +15,12 @@
 #ifndef __GADGET_CHIPS_H
 #define __GADGET_CHIPS_H
 
+#ifdef CONFIG_USB_GADGET_NET2272
+#define gadget_is_net2272(g)	!strcmp("net2272", (g)->name)
+#else
+#define gadget_is_net2272(g)	0
+#endif
+
 #ifdef CONFIG_USB_GADGET_NET2280
 #define	gadget_is_net2280(g)	!strcmp("net2280", (g)->name)
 #else
@@ -223,6 +229,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x29;
 	else if (gadget_is_s3c_hsudc(gadget))
 		return 0x30;
+	else if (gadget_is_net2272(gadget))
+		return 0x31;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
new file mode 100644
index 000000000000..29151c44f476
--- /dev/null
+++ b/drivers/usb/gadget/net2272.c
@@ -0,0 +1,2718 @@
+/*
+ * Driver for PLX NET2272 USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "net2272.h"
+
+#define DRIVER_DESC "PLX NET2272 USB Peripheral Controller"
+
+static const char driver_name[] = "net2272";
+static const char driver_vers[] = "2006 October 17/mainline";
+static const char driver_desc[] = DRIVER_DESC;
+
+static const char ep0name[] = "ep0";
+static const char * const ep_name[] = {
+	ep0name,
+	"ep-a", "ep-b", "ep-c",
+};
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#ifdef CONFIG_USB_GADGET_NET2272_DMA
+/*
+ * use_dma: the NET2272 can use an external DMA controller.
+ * Note that since there is no generic DMA api, some functions,
+ * notably request_dma, start_dma, and cancel_dma will need to be
+ * modified for your platform's particular dma controller.
+ *
+ * If use_dma is disabled, pio will be used instead.
+ */
+static int use_dma = 0;
+module_param(use_dma, bool, 0644);
+
+/*
+ * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b)
+ * The NET2272 can only use dma for a single endpoint at a time.
+ * At some point this could be modified to allow either endpoint
+ * to take control of dma as it becomes available.
+ *
+ * Note that DMA should not be used on OUT endpoints unless it can
+ * be guaranteed that no short packets will arrive on an IN endpoint
+ * while the DMA operation is pending.  Otherwise the OUT DMA will
+ * terminate prematurely (See NET2272 Errata 630-0213-0101)
+ */
+static ushort dma_ep = 1;
+module_param(dma_ep, ushort, 0644);
+
+/*
+ * dma_mode: net2272 dma mode setting (see LOCCTL1 definiton):
+ *	mode 0 == Slow DREQ mode
+ *	mode 1 == Fast DREQ mode
+ *	mode 2 == Burst mode
+ */
+static ushort dma_mode = 2;
+module_param(dma_mode, ushort, 0644);
+#else
+#define use_dma 0
+#define dma_ep 1
+#define dma_mode 2
+#endif
+
+/*
+ * fifo_mode: net2272 buffer configuration:
+ *      mode 0 == ep-{a,b,c} 512db each
+ *      mode 1 == ep-a 1k, ep-{b,c} 512db
+ *      mode 2 == ep-a 1k, ep-b 1k, ep-c 512db
+ *      mode 3 == ep-a 1k, ep-b disabled, ep-c 512db
+ */
+static ushort fifo_mode = 0;
+module_param(fifo_mode, ushort, 0644);
+
+/*
+ * enable_suspend: When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2272.  Otherwise,
+ * USB suspend requests will be ignored.  This is acceptible for
+ * self-powered devices.  For bus powered devices set this to 1.
+ */
+static ushort enable_suspend = 0;
+module_param(enable_suspend, ushort, 0644);
+
+static void assert_out_naking(struct net2272_ep *ep, const char *where)
+{
+	u8 tmp;
+
+#ifndef DEBUG
+	return;
+#endif
+
+	tmp = net2272_ep_read(ep, EP_STAT0);
+	if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+		dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n",
+			ep->ep.name, where, tmp);
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+	}
+}
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__)
+
+static void stop_out_naking(struct net2272_ep *ep)
+{
+	u8 tmp = net2272_ep_read(ep, EP_STAT0);
+
+	if ((tmp & (1 << NAK_OUT_PACKETS)) != 0)
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+}
+
+#define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out")
+
+static char *type_string(u8 bmAttributes)
+{
+	switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK: return "bulk";
+	case USB_ENDPOINT_XFER_ISOC: return "iso";
+	case USB_ENDPOINT_XFER_INT:  return "intr";
+	default:                     return "control";
+	}
+}
+
+static char *buf_state_string(unsigned state)
+{
+	switch (state) {
+	case BUFF_FREE:  return "free";
+	case BUFF_VALID: return "valid";
+	case BUFF_LCL:   return "local";
+	case BUFF_USB:   return "usb";
+	default:         return "unknown";
+	}
+}
+
+static char *dma_mode_string(void)
+{
+	if (!use_dma)
+		return "PIO";
+	switch (dma_mode) {
+	case 0:  return "SLOW DREQ";
+	case 1:  return "FAST DREQ";
+	case 2:  return "BURST";
+	default: return "invalid";
+	}
+}
+
+static void net2272_dequeue_all(struct net2272_ep *);
+static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *);
+static int net2272_fifo_status(struct usb_ep *);
+
+static struct usb_ep_ops net2272_ep_ops;
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct net2272 *dev;
+	struct net2272_ep *ep;
+	u32 max;
+	u8 tmp;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	_ep->maxpacket = max & 0x7fff;
+	ep->desc = desc;
+
+	/* net2272_ep_reset() has already been called */
+	ep->stopped = 0;
+	ep->wedged = 0;
+
+	/* set speed-dependent max packet */
+	net2272_ep_write(ep, EP_MAXPKT0, max & 0xff);
+	net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8);
+
+	/* set type, direction, address; reset fifo counters */
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+	tmp = usb_endpoint_type(desc);
+	if (usb_endpoint_xfer_bulk(desc)) {
+		/* catch some particularly blatant driver bugs */
+		if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
+		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
+			spin_unlock_irqrestore(&dev->lock, flags);
+			return -ERANGE;
+		}
+	}
+	ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0;
+	tmp <<= ENDPOINT_TYPE;
+	tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER);
+	tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION;
+	tmp |= (1 << ENDPOINT_ENABLE);
+
+	/* for OUT transfers, block the rx fifo until a read is posted */
+	ep->is_in = usb_endpoint_dir_in(desc);
+	if (!ep->is_in)
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	net2272_ep_write(ep, EP_CFG, tmp);
+
+	/* enable irqs */
+	tmp = (1 << ep->num) | net2272_read(dev, IRQENB0);
+	net2272_write(dev, IRQENB0, tmp);
+
+	tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB);
+	net2272_ep_write(ep, EP_IRQENB, tmp);
+
+	tmp = desc->bEndpointAddress;
+	dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n",
+		_ep->name, tmp & 0x0f, PIPEDIR(tmp),
+		type_string(desc->bmAttributes), max,
+		net2272_ep_read(ep, EP_CFG));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+static void net2272_ep_reset(struct net2272_ep *ep)
+{
+	u8 tmp;
+
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep.maxpacket = ~0;
+	ep->ep.ops = &net2272_ep_ops;
+
+	/* disable irqs, endpoint */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	/* init to our chosen defaults, notably so that we NAK OUT
+	 * packets until the driver queues a read.
+	 */
+	tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS);
+	net2272_ep_write(ep, EP_RSPSET, tmp);
+
+	tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE);
+	if (ep->num != 0)
+		tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT);
+
+	net2272_ep_write(ep, EP_RSPCLR, tmp);
+
+	/* scrub most status bits, and flush any fifo state */
+	net2272_ep_write(ep, EP_STAT0,
+			  (1 << DATA_IN_TOKEN_INTERRUPT)
+			| (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+
+	net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP)
+			  | (1 << BUFFER_FLUSH));
+
+	/* fifo size is handled seperately */
+}
+
+static int net2272_disable(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !ep->desc || _ep->name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	net2272_dequeue_all(ep);
+	net2272_ep_reset(ep);
+
+	dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name);
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static struct usb_request *
+net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+
+	if (!_ep)
+		return NULL;
+	ep = container_of(_ep, struct net2272_ep, ep);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void
+net2272_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct net2272_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static void
+net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status)
+{
+	struct net2272 *dev;
+	unsigned stopped = ep->stopped;
+
+	if (ep->num == 0) {
+		if (ep->dev->protocol_stall) {
+			ep->stopped = 1;
+			set_halt(ep);
+		}
+		allow_status(ep);
+	}
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (use_dma && req->mapped) {
+		dma_unmap_single(dev->dev, req->req.dma, req->req.length,
+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	}
+
+	if (status && status != -ESHUTDOWN)
+		dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length, req->req.buf);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&dev->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+}
+
+static int
+net2272_write_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned max)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	u16 *bufp;
+	unsigned length, count;
+	u8 tmp;
+
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n",
+		ep->ep.name, req, max, length,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	count = length;
+	bufp = (u16 *)buf;
+
+	while (likely(count >= 2)) {
+		/* no byte-swap required; chip endian set during init */
+		writew(*bufp++, ep_data);
+		count -= 2;
+	}
+	buf = (u8 *)bufp;
+
+	/* write final byte by placing the NET2272 into 8-bit mode */
+	if (unlikely(count)) {
+		tmp = net2272_read(ep->dev, LOCCTL);
+		net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH));
+		writeb(*buf, ep_data);
+		net2272_write(ep->dev, LOCCTL, tmp);
+	}
+	return length;
+}
+
+/* returns: 0: still running, 1: completed, negative: errno */
+static int
+net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned count, max;
+	int status;
+
+	dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+	/*
+	 * Keep loading the endpoint until the final packet is loaded,
+	 * or the endpoint buffer is full.
+	 */
+ top:
+	/*
+	 * Clear interrupt status
+	 *  - Packet Transmitted interrupt will become set again when the
+	 *    host successfully takes another packet
+	 */
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) {
+		buf = req->req.buf + req->req.actual;
+		prefetch(buf);
+
+		/* force pagesel */
+		net2272_ep_read(ep, EP_STAT0);
+
+		max = (net2272_ep_read(ep, EP_AVAIL1) << 8) |
+			(net2272_ep_read(ep, EP_AVAIL0));
+
+		if (max < ep->ep.maxpacket)
+			max = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+				| (net2272_ep_read(ep, EP_AVAIL0));
+
+		count = net2272_write_packet(ep, buf, req, max);
+		/* see if we are done */
+		if (req->req.length == req->req.actual) {
+			/* validate short or zlp packet */
+			if (count < ep->ep.maxpacket)
+				set_fifo_bytecount(ep, 0);
+			net2272_done(ep, req, 0);
+
+			if (!list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+						struct net2272_request,
+						queue);
+				status = net2272_kick_dma(ep, req);
+
+				if (status < 0)
+					if ((net2272_ep_read(ep, EP_STAT0)
+							& (1 << BUFFER_EMPTY)))
+						goto top;
+			}
+			return 1;
+		}
+		net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	}
+	return 0;
+}
+
+static void
+net2272_out_flush(struct net2272_ep *ep)
+{
+	ASSERT_OUT_NAKING(ep);
+
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT));
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static int
+net2272_read_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned avail)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	unsigned is_short;
+	u16 *bufp;
+
+	req->req.actual += avail;
+
+	dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n",
+		ep->ep.name, req, avail,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	is_short = (avail < ep->ep.maxpacket);
+
+	if (unlikely(avail == 0)) {
+		/* remove any zlp from the buffer */
+		(void)readw(ep_data);
+		return is_short;
+	}
+
+	/* Ensure we get the final byte */
+	if (unlikely(avail % 2))
+		avail++;
+	bufp = (u16 *)buf;
+
+	do {
+		*bufp++ = readw(ep_data);
+		avail -= 2;
+	} while (avail);
+
+	/*
+	 * To avoid false endpoint available race condition must read
+	 * ep stat0 twice in the case of a short transfer
+	 */
+	if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))
+		net2272_ep_read(ep, EP_STAT0);
+
+	return is_short;
+}
+
+static int
+net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned is_short;
+	int count;
+	int tmp;
+	int cleanup = 0;
+	int status = -1;
+
+	dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+ top:
+	do {
+		buf = req->req.buf + req->req.actual;
+		prefetchw(buf);
+
+		count = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+			| net2272_ep_read(ep, EP_AVAIL0);
+
+		net2272_ep_write(ep, EP_STAT0,
+			(1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+			(1 << DATA_PACKET_RECEIVED_INTERRUPT));
+
+		tmp = req->req.length - req->req.actual;
+
+		if (count > tmp) {
+			if ((tmp % ep->ep.maxpacket) != 0) {
+				dev_err(ep->dev->dev,
+					"%s out fifo %d bytes, expected %d\n",
+					ep->ep.name, count, tmp);
+				cleanup = 1;
+			}
+			count = (tmp > 0) ? tmp : 0;
+		}
+
+		is_short = net2272_read_packet(ep, buf, req, count);
+
+		/* completion */
+		if (unlikely(cleanup || is_short ||
+				((req->req.actual == req->req.length)
+				 && !req->req.zero))) {
+
+			if (cleanup) {
+				net2272_out_flush(ep);
+				net2272_done(ep, req, -EOVERFLOW);
+			} else
+				net2272_done(ep, req, 0);
+
+			/* re-initialize endpoint transfer registers
+			 * otherwise they may result in erroneous pre-validation
+			 * for subsequent control reads
+			 */
+			if (unlikely(ep->num == 0)) {
+				net2272_ep_write(ep, EP_TRANSFER2, 0);
+				net2272_ep_write(ep, EP_TRANSFER1, 0);
+				net2272_ep_write(ep, EP_TRANSFER0, 0);
+			}
+
+			if (!list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+				status = net2272_kick_dma(ep, req);
+				if ((status < 0) &&
+				    !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)))
+					goto top;
+			}
+			return 1;
+		}
+	} while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)));
+
+	return 0;
+}
+
+static void
+net2272_pio_advance(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	if (unlikely(list_empty(&ep->queue)))
+		return;
+
+	req = list_entry(ep->queue.next, struct net2272_request, queue);
+	(ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req);
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf,
+	unsigned len, unsigned dir)
+{
+	dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n",
+		ep, buf, len, dir);
+
+	/* The NET2272 only supports a single dma channel */
+	if (dev->dma_busy)
+		return -EBUSY;
+	/*
+	 * EP_TRANSFER (used to determine the number of bytes received
+	 * in an OUT transfer) is 24 bits wide; don't ask for more than that.
+	 */
+	if ((dir == 1) && (len > 0x1000000))
+		return -EINVAL;
+
+	dev->dma_busy = 1;
+
+	/* initialize platform's dma */
+#ifdef CONFIG_PCI
+	/* NET2272 addr, buffer addr, length, etc. */
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		/* Setup PLX 9054 DMA mode */
+		writel((1 << LOCAL_BUS_WIDTH) |
+			(1 << TA_READY_INPUT_ENABLE) |
+			(0 << LOCAL_BURST_ENABLE) |
+			(1 << DONE_INTERRUPT_ENABLE) |
+			(1 << LOCAL_ADDRESSING_MODE) |
+			(1 << DEMAND_MODE) |
+			(1 << DMA_EOT_ENABLE) |
+			(1 << FAST_SLOW_TERMINATE_MODE_SELECT) |
+			(1 << DMA_CHANNEL_INTERRUPT_SELECT),
+			dev->rdk1.plx9054_base_addr + DMAMODE0);
+
+		writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0);
+		writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0);
+		writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0);
+		writel((dir << DIRECTION_OF_TRANSFER) |
+			(1 << INTERRUPT_AFTER_TERMINAL_COUNT),
+			dev->rdk1.plx9054_base_addr + DMADPR0);
+		writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) |
+			readl(dev->rdk1.plx9054_base_addr + INTCSR),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+		break;
+	}
+#endif
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(1 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	(void) net2272_read(dev, SCRATCH);
+
+	return 0;
+}
+
+static void
+net2272_start_dma(struct net2272 *dev)
+{
+	/* start platform's dma controller */
+#ifdef CONFIG_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req)
+{
+	unsigned size;
+	u8 tmp;
+
+	if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma)
+		return -EINVAL;
+
+	/* don't use dma for odd-length transfers
+	 * otherwise, we'd need to deal with the last byte with pio
+	 */
+	if (req->req.length & 1)
+		return -EINVAL;
+
+	dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08x\n",
+		ep->ep.name, req, req->req.dma);
+
+	net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	/* The NET2272 can only use DMA on one endpoint at a time */
+	if (ep->dev->dma_busy)
+		return -EBUSY;
+
+	/* Make sure we only DMA an even number of bytes (we'll use
+	 * pio to complete the transfer)
+	 */
+	size = req->req.length;
+	size &= ~1;
+
+	/* device-to-host transfer */
+	if (ep->is_in) {
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+		req->req.actual += size;
+
+	/* host-to-device transfer */
+	} else {
+		tmp = net2272_ep_read(ep, EP_STAT0);
+
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+
+		if (!(tmp & (1 << BUFFER_EMPTY)))
+			ep->not_empty = 1;
+		else
+			ep->not_empty = 0;
+
+
+		/* allow the endpoint's buffer to fill */
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+
+		/* this transfer completed and data's already in the fifo
+		 * return error so pio gets used.
+		 */
+		if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
+
+			/* deassert dreq */
+			net2272_write(ep->dev, DMAREQ,
+				(0 << DMA_BUFFER_VALID) |
+				(0 << DMA_REQUEST_ENABLE) |
+				(1 << DMA_CONTROL_DACK) |
+				(ep->dev->dma_eot_polarity << EOT_POLARITY) |
+				(ep->dev->dma_dack_polarity << DACK_POLARITY) |
+				(ep->dev->dma_dreq_polarity << DREQ_POLARITY) |
+				((ep->num >> 1) << DMA_ENDPOINT_SELECT));
+
+			return -EBUSY;
+		}
+	}
+
+	/* Don't use per-packet interrupts: use dma interrupts only */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	net2272_start_dma(ep->dev);
+
+	return 0;
+}
+
+static void net2272_cancel_dma(struct net2272 *dev)
+{
+#ifdef CONFIG_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0);
+		writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0);
+		while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) &
+		         (1 << CHANNEL_DONE)))
+			continue;	/* wait for dma to stabalize */
+
+		/* dma abort generates an interrupt */
+		writeb(1 << CHANNEL_CLEAR_INTERRUPT,
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+
+	dev->dma_busy = 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct net2272_request *req;
+	struct net2272_ep *ep;
+	struct net2272 *dev;
+	unsigned long flags;
+	int status = -1;
+	u8 s;
+
+	req = container_of(_req, struct net2272_request, req);
+	if (!_req || !_req->complete || !_req->buf
+			|| !list_empty(&req->queue))
+		return -EINVAL;
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	/* set up dma mapping in case the caller didn't */
+	if (use_dma && ep->dma && _req->dma == DMA_ADDR_INVALID) {
+		_req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 1;
+	}
+
+	dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08x %s\n",
+		_ep->name, _req, _req->length, _req->buf,
+		_req->dma, _req->zero ? "zero" : "!zero");
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		/* maybe there's no control data, just status ack */
+		if (ep->num == 0 && _req->length == 0) {
+			net2272_done(ep, req, 0);
+			dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name);
+			goto done;
+		}
+
+		/* Return zlp, don't let it block subsequent packets */
+		s = net2272_ep_read(ep, EP_STAT0);
+		if (s & (1 << BUFFER_EMPTY)) {
+			/* Buffer is empty check for a blocking zlp, handle it */
+			if ((s & (1 << NAK_OUT_PACKETS)) &&
+			    net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) {
+				dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n");
+				/*
+				 * Request is going to terminate with a short packet ...
+				 * hope the client is ready for it!
+				 */
+				status = net2272_read_fifo(ep, req);
+				/* clear short packet naking */
+				net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS));
+				goto done;
+			}
+		}
+
+		/* try dma first */
+		status = net2272_kick_dma(ep, req);
+
+		if (status < 0) {
+			/* dma failed (most likely in use by another endpoint)
+			 * fallback to pio
+			 */
+			status = 0;
+
+			if (ep->is_in)
+				status = net2272_write_fifo(ep, req);
+			else {
+				s = net2272_ep_read(ep, EP_STAT0);
+				if ((s & (1 << BUFFER_EMPTY)) == 0)
+					status = net2272_read_fifo(ep, req);
+			}
+
+			if (unlikely(status != 0)) {
+				if (status > 0)
+					status = 0;
+				req = NULL;
+			}
+		}
+	}
+	if (likely(req != 0))
+		list_add_tail(&req->queue, &ep->queue);
+
+	if (likely(!list_empty(&ep->queue)))
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+ done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* dequeue ALL requests */
+static void
+net2272_dequeue_all(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+				struct net2272_request,
+				queue);
+		net2272_done(ep, req, -ESHUTDOWN);
+	}
+}
+
+/* dequeue JUST ONE request */
+static int
+net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+	unsigned long flags;
+	int stopped;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	stopped = ep->stopped;
+	ep->stopped = 1;
+
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		return -EINVAL;
+	}
+
+	/* queue head may be partially complete */
+	if (ep->queue.next == &req->queue) {
+		dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name);
+		net2272_done(ep, req, -ECONNRESET);
+	}
+	req = NULL;
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+	if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	if (!list_empty(&ep->queue))
+		ret = -EAGAIN;
+	else if (ep->is_in && value && net2272_fifo_status(_ep) != 0)
+		ret = -EAGAIN;
+	else {
+		dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name,
+			value ? "set" : "clear",
+			wedged ? "wedge" : "halt");
+		/* set/clear */
+		if (value) {
+			if (ep->num == 0)
+				ep->dev->protocol_stall = 1;
+			else
+				set_halt(ep);
+			if (wedged)
+				ep->wedged = 1;
+		} else {
+			clear_halt(ep);
+			ep->wedged = 0;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	return ret;
+}
+
+static int
+net2272_set_halt(struct usb_ep *_ep, int value)
+{
+	return net2272_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int
+net2272_set_wedge(struct usb_ep *_ep)
+{
+	if (!_ep || _ep->name == ep0name)
+		return -EINVAL;
+	return net2272_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static int
+net2272_fifo_status(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	u16 avail;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -ENODEV;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	avail = net2272_ep_read(ep, EP_AVAIL1) << 8;
+	avail |= net2272_ep_read(ep, EP_AVAIL0);
+	if (avail > ep->fifo_size)
+		return -EOVERFLOW;
+	if (ep->is_in)
+		avail = ep->fifo_size - avail;
+	return avail;
+}
+
+static void
+net2272_fifo_flush(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return;
+
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static struct usb_ep_ops net2272_ep_ops = {
+	.enable        = net2272_enable,
+	.disable       = net2272_disable,
+
+	.alloc_request = net2272_alloc_request,
+	.free_request  = net2272_free_request,
+
+	.queue         = net2272_queue,
+	.dequeue       = net2272_dequeue,
+
+	.set_halt      = net2272_set_halt,
+	.set_wedge     = net2272_set_wedge,
+	.fifo_status   = net2272_fifo_status,
+	.fifo_flush    = net2272_fifo_flush,
+};
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_get_frame(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	unsigned long flags;
+	u16 ret;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	ret = net2272_read(dev, FRAME1) << 8;
+	ret |= net2272_read(dev, FRAME0);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int
+net2272_wakeup(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return 0;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	if (tmp & (1 << IO_WAKEUP_ENABLE))
+		net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int
+net2272_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	struct net2272 *dev;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	dev->is_selfpowered = value;
+
+	return 0;
+}
+
+static int
+net2272_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	dev->softconnect = (is_on != 0);
+	if (is_on)
+		tmp |= (1 << USB_DETECT_ENABLE);
+	else
+		tmp &= ~(1 << USB_DETECT_ENABLE);
+	net2272_write(dev, USBCTL0, tmp);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops net2272_ops = {
+	.get_frame       = net2272_get_frame,
+	.wakeup          = net2272_wakeup,
+	.set_selfpowered = net2272_set_selfpowered,
+	.pullup          = net2272_pullup
+};
+
+/*---------------------------------------------------------------------------*/
+
+static ssize_t
+net2272_show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct net2272 *dev;
+	char *next;
+	unsigned size, t;
+	unsigned long flags;
+	u8 t1, t2;
+	int i;
+	const char *s;
+
+	dev = dev_get_drvdata(_dev);
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->driver)
+		s = dev->driver->driver.name;
+	else
+		s = "(none)";
+
+	/* Main Control Registers */
+	t = scnprintf(next, size, "%s version %s,"
+		"chiprev %02x, locctl %02x\n"
+		"irqenb0 %02x irqenb1 %02x "
+		"irqstat0 %02x irqstat1 %02x\n",
+		driver_name, driver_vers, dev->chiprev,
+		net2272_read(dev, LOCCTL),
+		net2272_read(dev, IRQENB0),
+		net2272_read(dev, IRQENB1),
+		net2272_read(dev, IRQSTAT0),
+		net2272_read(dev, IRQSTAT1));
+	size -= t;
+	next += t;
+
+	/* DMA */
+	t1 = net2272_read(dev, DMAREQ);
+	t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n",
+		t1, ep_name[(t1 & 0x01) + 1],
+		t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "",
+		t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "",
+		t1 & (1 << DMA_REQUEST) ? "req " : "",
+		t1 & (1 << DMA_BUFFER_VALID) ? "valid " : "");
+	size -= t;
+	next += t;
+
+	/* USB Control Registers */
+	t1 = net2272_read(dev, USBCTL1);
+	if (t1 & (1 << VBUS_PIN)) {
+		if (t1 & (1 << USB_HIGH_SPEED))
+			s = "high speed";
+		else if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+			s = "powered";
+		else
+			s = "full speed";
+	} else
+		s = "not attached";
+	t = scnprintf(next, size,
+		"usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n",
+		net2272_read(dev, USBCTL0), t1,
+		net2272_read(dev, OURADDR), s);
+	size -= t;
+	next += t;
+
+	/* Endpoint Registers */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep;
+
+		ep = &dev->ep[i];
+		if (i && !ep->desc)
+			continue;
+
+		t1 = net2272_ep_read(ep, EP_CFG);
+		t2 = net2272_ep_read(ep, EP_RSPSET);
+		t = scnprintf(next, size,
+			"\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s"
+			"irqenb %02x\n",
+			ep->ep.name, t1, t2,
+			(t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "",
+			(t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "",
+			(t2 & (1 << AUTOVALIDATE)) ? "auto " : "",
+			(t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "",
+			(t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "",
+			(t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "",
+			(t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ",
+			(t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "",
+			net2272_ep_read(ep, EP_IRQENB));
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tstat0 %02x stat1 %02x avail %04x "
+			"(ep%d%s-%s)%s\n",
+			net2272_ep_read(ep, EP_STAT0),
+			net2272_ep_read(ep, EP_STAT1),
+			(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0),
+			t1 & 0x0f,
+			ep->is_in ? "in" : "out",
+			type_string(t1 >> 5),
+			ep->stopped ? "*" : "");
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tep_transfer %06x\n",
+			((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) |
+			((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) |
+			((net2272_ep_read(ep, EP_TRANSFER0) & 0xff)));
+		size -= t;
+		next += t;
+
+		t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03;
+		t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03;
+		t = scnprintf(next, size,
+			"\tbuf-a %s buf-b %s\n",
+			buf_state_string(t1),
+			buf_state_string(t2));
+		size -= t;
+		next += t;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, net2272_show_registers, NULL);
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_set_fifo_mode(struct net2272 *dev, int mode)
+{
+	u8 tmp;
+
+	tmp = net2272_read(dev, LOCCTL) & 0x3f;
+	tmp |= (mode << 6);
+	net2272_write(dev, LOCCTL, tmp);
+
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* always ep-a, ep-c ... maybe not ep-b */
+	list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list);
+
+	switch (mode) {
+	case 0:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512;
+		break;
+	case 1:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = 1024;
+		dev->ep[2].fifo_size = 512;
+		break;
+	case 2:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024;
+		break;
+	case 3:
+		dev->ep[1].fifo_size = 1024;
+		break;
+	}
+
+	/* ep-c is always 2 512 byte buffers */
+	list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list);
+	dev->ep[3].fifo_size = 512;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static struct net2272 *the_controller;
+
+static void
+net2272_usb_reset(struct net2272 *dev)
+{
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	net2272_cancel_dma(dev);
+
+	net2272_write(dev, IRQENB0, 0);
+	net2272_write(dev, IRQENB1, 0);
+
+	/* clear irq state */
+	net2272_write(dev, IRQSTAT0, 0xff);
+	net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT));
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(0 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((dma_ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	net2272_cancel_dma(dev);
+	net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0);
+
+	/* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping
+	 * note that the higher level gadget drivers are expected to convert data to little endian.
+	 * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here
+	 */
+	net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH));
+	net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE));
+}
+
+static void
+net2272_usb_reinit(struct net2272 *dev)
+{
+	int i;
+
+	/* basic endpoint init */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep = &dev->ep[i];
+
+		ep->ep.name = ep_name[i];
+		ep->dev = dev;
+		ep->num = i;
+		ep->not_empty = 0;
+
+		if (use_dma && ep->num == dma_ep)
+			ep->dma = 1;
+
+		if (i > 0 && i <= 3)
+			ep->fifo_size = 512;
+		else
+			ep->fifo_size = 64;
+		net2272_ep_reset(ep);
+	}
+	dev->ep[0].ep.maxpacket = 64;
+
+	dev->gadget.ep0 = &dev->ep[0].ep;
+	dev->ep[0].stopped = 0;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+static void
+net2272_ep0_start(struct net2272 *dev)
+{
+	struct net2272_ep *ep0 = &dev->ep[0];
+
+	net2272_ep_write(ep0, EP_RSPSET,
+		(1 << NAK_OUT_PACKETS_MODE) |
+		(1 << ALT_NAK_OUT_PACKETS));
+	net2272_ep_write(ep0, EP_RSPCLR,
+		(1 << HIDE_STATUS_PHASE) |
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE));
+	net2272_write(dev, USBCTL0,
+		(dev->softconnect << USB_DETECT_ENABLE) |
+		(1 << USB_ROOT_PORT_WAKEUP_ENABLE) |
+		(1 << IO_WAKEUP_ENABLE));
+	net2272_write(dev, IRQENB0,
+		(1 << SETUP_PACKET_INTERRUPT_ENABLE) |
+		(1 << ENDPOINT_0_INTERRUPT_ENABLE) |
+		(1 << DMA_DONE_INTERRUPT_ENABLE));
+	net2272_write(dev, IRQENB1,
+		(1 << VBUS_INTERRUPT_ENABLE) |
+		(1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) |
+		(1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE));
+}
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+	int (*bind)(struct usb_gadget *))
+{
+	struct net2272 *dev = the_controller;
+	int ret;
+	unsigned i;
+
+	if (!driver || !bind || !driver->unbind || !driver->setup ||
+	    driver->speed != USB_SPEED_HIGH)
+		return -EINVAL;
+	if (!dev)
+		return -ENODEV;
+	if (dev->driver)
+		return -EBUSY;
+
+	for (i = 0; i < 4; ++i)
+		dev->ep[i].irqs = 0;
+	/* hook up the driver ... */
+	dev->softconnect = 1;
+	driver->driver.bus = NULL;
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+	ret = bind(&dev->gadget);
+	if (ret) {
+		dev_dbg(dev->dev, "bind to driver %s --> %d\n",
+			driver->driver.name, ret);
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		return ret;
+	}
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	net2272_ep0_start(dev);
+
+	dev_dbg(dev->dev, "%s ready\n", driver->driver.name);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+static void
+stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect if it's not connected */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	/* stop hardware; prevent new request submissions;
+	 * and kill any outstanding requests.
+	 */
+	net2272_usb_reset(dev);
+	for (i = 0; i < 4; ++i)
+		net2272_dequeue_all(&dev->ep[i]);
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+
+	}
+	net2272_usb_reinit(dev);
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct net2272 *dev = the_controller;
+	unsigned long flags;
+
+	if (!dev)
+		return -ENODEV;
+	if (!driver || driver != dev->driver)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	stop_activity(dev, driver);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	net2272_pullup(&dev->gadget, 0);
+
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+
+	dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*---------------------------------------------------------------------------*/
+/* handle ep-a/ep-b dma completions */
+static void
+net2272_handle_dma(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	unsigned len;
+	int status;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+	else
+		req = NULL;
+
+	dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req);
+
+	/* Ensure DREQ is de-asserted */
+	net2272_write(ep->dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID)
+	      | (0 << DMA_REQUEST_ENABLE)
+	      | (1 << DMA_CONTROL_DACK)
+	      | (ep->dev->dma_eot_polarity << EOT_POLARITY)
+	      | (ep->dev->dma_dack_polarity << DACK_POLARITY)
+	      | (ep->dev->dma_dreq_polarity << DREQ_POLARITY)
+	      | ((ep->dma >> 1) << DMA_ENDPOINT_SELECT));
+
+	ep->dev->dma_busy = 0;
+
+	net2272_ep_write(ep, EP_IRQENB,
+		  (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB));
+
+	/* device-to-host transfer completed */
+	if (ep->is_in) {
+		/* validate a short packet or zlp if necessary */
+		if ((req->req.length % ep->ep.maxpacket != 0) ||
+				req->req.zero)
+			set_fifo_bytecount(ep, 0);
+
+		net2272_done(ep, req, 0);
+		if (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+			status = net2272_kick_dma(ep, req);
+			if (status < 0)
+				net2272_pio_advance(ep);
+		}
+
+	/* host-to-device transfer completed */
+	} else {
+		/* terminated with a short packet? */
+		if (net2272_read(ep->dev, IRQSTAT0) &
+				(1 << DMA_DONE_INTERRUPT)) {
+			/* abort system dma */
+			net2272_cancel_dma(ep->dev);
+		}
+
+		/* EP_TRANSFER will contain the number of bytes
+		 * actually received.
+		 * NOTE: There is no overflow detection on EP_TRANSFER:
+		 * We can't deal with transfers larger than 2^24 bytes!
+		 */
+		len = (net2272_ep_read(ep, EP_TRANSFER2) << 16)
+			| (net2272_ep_read(ep, EP_TRANSFER1) << 8)
+			| (net2272_ep_read(ep, EP_TRANSFER0));
+
+		if (ep->not_empty)
+			len += 4;
+
+		req->req.actual += len;
+
+		/* get any remaining data */
+		net2272_pio_advance(ep);
+	}
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_handle_ep(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	u8 stat0, stat1;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+			struct net2272_request, queue);
+	else
+		req = NULL;
+
+	/* ack all, and handle what we care about */
+	stat0 = net2272_ep_read(ep, EP_STAT0);
+	stat1 = net2272_ep_read(ep, EP_STAT1);
+	ep->irqs++;
+
+	dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n",
+		ep->ep.name, stat0, stat1, req ? &req->req : 0);
+
+	net2272_ep_write(ep, EP_STAT0, stat0 &
+		~((1 << NAK_OUT_PACKETS)
+		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)));
+	net2272_ep_write(ep, EP_STAT1, stat1);
+
+	/* data packet(s) received (in the fifo, OUT)
+	 * direction must be validated, otherwise control read status phase
+	 * could be interpreted as a valid packet
+	 */
+	if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT)))
+		net2272_pio_advance(ep);
+	/* data packet(s) transmitted (IN) */
+	else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))
+		net2272_pio_advance(ep);
+}
+
+static struct net2272_ep *
+net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex)
+{
+	struct net2272_ep *ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &dev->ep[0];
+
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f))
+			return ep;
+	}
+	return NULL;
+}
+
+/*
+ * USB Test Packet:
+ * JKJKJKJK * 9
+ * JJKKJJKK * 8
+ * JJJJKKKK * 8
+ * JJJJJJJKKKKKKK * 8
+ * JJJJJJJK * 8
+ * {JKKKKKKK * 10}, JK
+ */
+static const u8 net2272_test_packet[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+	0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E
+};
+
+static void
+net2272_set_test_mode(struct net2272 *dev, int mode)
+{
+	int i;
+
+	/* Disable all net2272 interrupts:
+	 * Nothing but a power cycle should stop the test.
+	 */
+	net2272_write(dev, IRQENB0, 0x00);
+	net2272_write(dev, IRQENB1, 0x00);
+
+	/* Force tranceiver to high-speed */
+	net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED);
+
+	net2272_write(dev, PAGESEL, 0);
+	net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT);
+	net2272_write(dev, EP_RSPCLR,
+			  (1 << CONTROL_STATUS_PHASE_HANDSHAKE)
+			| (1 << HIDE_STATUS_PHASE));
+	net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION);
+	net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH);
+
+	/* wait for status phase to complete */
+	while (!(net2272_read(dev, EP_STAT0) &
+				(1 << DATA_PACKET_TRANSMITTED_INTERRUPT)))
+		;
+
+	/* Enable test mode */
+	net2272_write(dev, USBTEST, mode);
+
+	/* load test packet */
+	if (mode == TEST_PACKET) {
+		/* switch to 8 bit mode */
+		net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) &
+				~(1 << DATA_WIDTH));
+
+		for (i = 0; i < sizeof(net2272_test_packet); ++i)
+			net2272_write(dev, EP_DATA, net2272_test_packet[i]);
+
+		/* Validate test packet */
+		net2272_write(dev, EP_TRANSFER0, 0);
+	}
+}
+
+static void
+net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
+{
+	struct net2272_ep *ep;
+	u8 num, scratch;
+
+	/* starting a control request? */
+	if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) {
+		union {
+			u8 raw[8];
+			struct usb_ctrlrequest	r;
+		} u;
+		int tmp = 0;
+		struct net2272_request *req;
+
+		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
+			if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED))
+				dev->gadget.speed = USB_SPEED_HIGH;
+			else
+				dev->gadget.speed = USB_SPEED_FULL;
+			dev_dbg(dev->dev, "%s speed\n",
+				(dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+		}
+
+		ep = &dev->ep[0];
+		ep->irqs++;
+
+		/* make sure any leftover interrupt state is cleared */
+		stat &= ~(1 << ENDPOINT_0_INTERRUPT);
+		while (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+			net2272_done(ep, req,
+				(req->req.actual == req->req.length) ? 0 : -EPROTO);
+		}
+		ep->stopped = 0;
+		dev->protocol_stall = 0;
+		net2272_ep_write(ep, EP_STAT0,
+			    (1 << DATA_IN_TOKEN_INTERRUPT)
+			  | (1 << DATA_OUT_TOKEN_INTERRUPT)
+			  | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			  | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			  | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+		net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP));
+
+		/*
+		 * Ensure Control Read pre-validation setting is beyond maximum size
+		 *  - Control Writes can leave non-zero values in EP_TRANSFER. If
+		 *    an EP0 transfer following the Control Write is a Control Read,
+		 *    the NET2272 sees the non-zero EP_TRANSFER as an unexpected
+		 *    pre-validation count.
+		 *  - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures
+		 *    the pre-validation count cannot cause an unexpected validatation
+		 */
+		net2272_write(dev, PAGESEL, 0);
+		net2272_write(dev, EP_TRANSFER2, 0xff);
+		net2272_write(dev, EP_TRANSFER1, 0xff);
+		net2272_write(dev, EP_TRANSFER0, 0xff);
+
+		u.raw[0] = net2272_read(dev, SETUP0);
+		u.raw[1] = net2272_read(dev, SETUP1);
+		u.raw[2] = net2272_read(dev, SETUP2);
+		u.raw[3] = net2272_read(dev, SETUP3);
+		u.raw[4] = net2272_read(dev, SETUP4);
+		u.raw[5] = net2272_read(dev, SETUP5);
+		u.raw[6] = net2272_read(dev, SETUP6);
+		u.raw[7] = net2272_read(dev, SETUP7);
+		/*
+		 * If you have a big endian cpu make sure le16_to_cpus
+		 * performs the proper byte swapping here...
+		 */
+		le16_to_cpus(&u.r.wValue);
+		le16_to_cpus(&u.r.wIndex);
+		le16_to_cpus(&u.r.wLength);
+
+		/* ack the irq */
+		net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT);
+		stat ^= (1 << SETUP_PACKET_INTERRUPT);
+
+		/* watch control traffic at the token level, and force
+		 * synchronization before letting the status phase happen.
+		 */
+		ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+		if (ep->is_in) {
+			scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+			stop_out_naking(ep);
+		} else
+			scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+		net2272_ep_write(ep, EP_IRQENB, scratch);
+
+		if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			goto delegate;
+		switch (u.r.bRequest) {
+		case USB_REQ_GET_STATUS: {
+			struct net2272_ep *e;
+			u16 status = 0;
+
+			switch (u.r.bRequestType & USB_RECIP_MASK) {
+			case USB_RECIP_ENDPOINT:
+				e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+				if (!e || u.r.wLength > 2)
+					goto do_stall;
+				if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT))
+					status = __constant_cpu_to_le16(1);
+				else
+					status = __constant_cpu_to_le16(0);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "%s stat %02x\n",
+					ep->ep.name, status);
+				goto next_endpoints;
+			case USB_RECIP_DEVICE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+				if (dev->is_selfpowered)
+					status = (1 << USB_DEVICE_SELF_POWERED);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "device stat %02x\n", status);
+				goto next_endpoints;
+			case USB_RECIP_INTERFACE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "interface status %02x\n", status);
+				goto next_endpoints;
+			}
+
+			break;
+		}
+		case USB_REQ_CLEAR_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			if (e->wedged) {
+				dev_vdbg(dev->dev, "%s wedged, halt not cleared\n",
+					ep->ep.name);
+			} else {
+				dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name);
+				clear_halt(e);
+			}
+			allow_status(ep);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType == USB_RECIP_DEVICE) {
+				if (u.r.wIndex != NORMAL_OPERATION)
+					net2272_set_test_mode(dev, (u.r.wIndex >> 8));
+				allow_status(ep);
+				dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex);
+				goto next_endpoints;
+			} else if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			set_halt(e);
+			allow_status(ep);
+			dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_ADDRESS: {
+			net2272_write(dev, OURADDR, u.r.wValue & 0xff);
+			allow_status(ep);
+			break;
+		}
+		default:
+ delegate:
+			dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x "
+				"ep_cfg %08x\n",
+				u.r.bRequestType, u.r.bRequest,
+				u.r.wValue, u.r.wIndex,
+				net2272_ep_read(ep, EP_CFG));
+			spin_unlock(&dev->lock);
+			tmp = dev->driver->setup(&dev->gadget, &u.r);
+			spin_lock(&dev->lock);
+		}
+
+		/* stall ep0 on error */
+		if (tmp < 0) {
+ do_stall:
+			dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n",
+				u.r.bRequestType, u.r.bRequest, tmp);
+			dev->protocol_stall = 1;
+		}
+	/* endpoint dma irq? */
+	} else if (stat & (1 << DMA_DONE_INTERRUPT)) {
+		net2272_cancel_dma(dev);
+		net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT);
+		stat &= ~(1 << DMA_DONE_INTERRUPT);
+		num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT))
+			? 2 : 1;
+
+		ep = &dev->ep[num];
+		net2272_handle_dma(ep);
+	}
+
+ next_endpoints:
+	/* endpoint data irq? */
+	scratch = stat & 0x0f;
+	stat &= ~0x0f;
+	for (num = 0; scratch; num++) {
+		u8 t;
+
+		/* does this endpoint's FIFO and queue need tending? */
+		t = 1 << num;
+		if ((scratch & t) == 0)
+			continue;
+		scratch ^= t;
+
+		ep = &dev->ep[num];
+		net2272_handle_ep(ep);
+	}
+
+	/* some interrupts we can just ignore */
+	stat &= ~(1 << SOF_INTERRUPT);
+
+	if (stat)
+		dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat);
+}
+
+static void
+net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat)
+{
+	u8 tmp, mask;
+
+	/* after disconnect there's nothing else to do! */
+	tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT);
+	mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED);
+
+	if (stat & tmp) {
+		net2272_write(dev, IRQSTAT1, tmp);
+		if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) &&
+				((net2272_read(dev, USBCTL1) & mask) == 0))
+			|| ((net2272_read(dev, USBCTL1) & (1 << VBUS_PIN))
+				== 0))
+				&& (dev->gadget.speed != USB_SPEED_UNKNOWN)) {
+			dev_dbg(dev->dev, "disconnect %s\n",
+				dev->driver->driver.name);
+			stop_activity(dev, dev->driver);
+			net2272_ep0_start(dev);
+			return;
+		}
+		stat &= ~tmp;
+
+		if (!stat)
+			return;
+	}
+
+	tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT);
+	if (stat & tmp) {
+		net2272_write(dev, IRQSTAT1, tmp);
+		if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
+			if (dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			if (!enable_suspend) {
+				stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
+				dev_dbg(dev->dev, "Suspend disabled, ignoring\n");
+			}
+		} else {
+			if (dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+		}
+		stat &= ~tmp;
+	}
+
+	/* clear any other status/irqs */
+	if (stat)
+		net2272_write(dev, IRQSTAT1, stat);
+
+	/* some status we can just ignore */
+	stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			| (1 << SUSPEND_REQUEST_INTERRUPT)
+			| (1 << RESUME_INTERRUPT));
+	if (!stat)
+		return;
+	else
+		dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat);
+}
+
+static irqreturn_t net2272_irq(int irq, void *_dev)
+{
+	struct net2272 *dev = _dev;
+#if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2)
+	u32 intcsr;
+#endif
+#if defined(PLX_PCI_RDK)
+	u8 dmareq;
+#endif
+	spin_lock(&dev->lock);
+#if defined(PLX_PCI_RDK)
+	intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+
+	if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) {
+		writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE),
+				dev->rdk1.plx9054_base_addr + INTCSR);
+		net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+		net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+		intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+		writel(intcsr | (1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	}
+	if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) {
+		writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+				dev->rdk1.plx9054_base_addr + DMACSR0);
+
+		dmareq = net2272_read(dev, DMAREQ);
+		if (dmareq & 0x01)
+			net2272_handle_dma(&dev->ep[2]);
+		else
+			net2272_handle_dma(&dev->ep[1]);
+	}
+#endif
+#if defined(PLX_PCI_RDK2)
+	/* see if PCI int for us by checking irqstat */
+	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
+	if (!intcsr & (1 << NET2272_PCI_IRQ))
+		return IRQ_NONE;
+	/* check dma interrupts */
+#endif
+	/* Platform/devcice interrupt handler */
+#if !defined(PLX_PCI_RDK)
+	net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+	net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+#endif
+	spin_unlock(&dev->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int net2272_present(struct net2272 *dev)
+{
+	/*
+	 * Quick test to see if CPU can communicate properly with the NET2272.
+	 * Verifies connection using writes and reads to write/read and
+	 * read-only registers.
+	 *
+	 * This routine is strongly recommended especially during early bring-up
+	 * of new hardware, however for designs that do not apply Power On System
+	 * Tests (POST) it may discarded (or perhaps minimized).
+	 */
+	unsigned int ii;
+	u8 val, refval;
+
+	/* Verify NET2272 write/read SCRATCH register can write and read */
+	refval = net2272_read(dev, SCRATCH);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, SCRATCH, ii);
+		val = net2272_read(dev, SCRATCH);
+		if (val != ii) {
+			dev_dbg(dev->dev,
+				"%s: write/read SCRATCH register test failed: "
+				"wrote:0x%2.2x, read:0x%2.2x\n",
+				__func__, ii, val);
+			return -EINVAL;
+		}
+	}
+	/* To be nice, we write the original SCRATCH value back: */
+	net2272_write(dev, SCRATCH, refval);
+
+	/* Verify NET2272 CHIPREV register is read-only: */
+	refval = net2272_read(dev, CHIPREV_2272);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, CHIPREV_2272, ii);
+		val = net2272_read(dev, CHIPREV_2272);
+		if (val != refval) {
+			dev_dbg(dev->dev,
+				"%s: write/read CHIPREV register test failed: "
+				"wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n",
+				__func__, ii, val, refval);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Verify NET2272's "NET2270 legacy revision" register
+	 *  - NET2272 has two revision registers. The NET2270 legacy revision
+	 *    register should read the same value, regardless of the NET2272
+	 *    silicon revision.  The legacy register applies to NET2270
+	 *    firmware being applied to the NET2272.
+	 */
+	val = net2272_read(dev, CHIPREV_LEGACY);
+	if (val != NET2270_LEGACY_REV) {
+		/*
+		 * Unexpected legacy revision value
+		 * - Perhaps the chip is a NET2270?
+		 */
+		dev_dbg(dev->dev,
+			"%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n"
+			" - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n",
+			__func__, NET2270_LEGACY_REV, val);
+		return -EINVAL;
+	}
+
+	/*
+	 * Verify NET2272 silicon revision
+	 *  - This revision register is appropriate for the silicon version
+	 *    of the NET2272
+	 */
+	val = net2272_read(dev, CHIPREV_2272);
+	switch (val) {
+	case CHIPREV_NET2272_R1:
+		/*
+		 * NET2272 Rev 1 has DMA related errata:
+		 *  - Newer silicon (Rev 1A or better) required
+		 */
+		dev_dbg(dev->dev,
+			"%s: Rev 1 detected: newer silicon recommended for DMA support\n",
+			__func__);
+		break;
+	case CHIPREV_NET2272_R1A:
+		break;
+	default:
+		/* NET2272 silicon version *may* not work with this firmware */
+		dev_dbg(dev->dev,
+			"%s: unexpected silicon revision register value: "
+			" CHIPREV_2272: 0x%2.2x\n",
+			__func__, val);
+		/*
+		 * Return Success, even though the chip rev is not an expected value
+		 *  - Older, pre-built firmware can attempt to operate on newer silicon
+		 *  - Often, new silicon is perfectly compatible
+		 */
+	}
+
+	/* Success: NET2272 checks out OK */
+	return 0;
+}
+
+static void
+net2272_gadget_release(struct device *_dev)
+{
+	struct net2272 *dev = dev_get_drvdata(_dev);
+	kfree(dev);
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void __devexit
+net2272_remove(struct net2272 *dev)
+{
+	/* start with the driver above us */
+	if (dev->driver) {
+		/* should have been done already by driver model core */
+		dev_warn(dev->dev, "pci remove, driver '%s' is still registered\n",
+			dev->driver->driver.name);
+		usb_gadget_unregister_driver(dev->driver);
+	}
+
+	free_irq(dev->irq, dev);
+	iounmap(dev->base_addr);
+
+	device_unregister(&dev->gadget.dev);
+	device_remove_file(dev->dev, &dev_attr_registers);
+
+	dev_info(dev->dev, "unbind\n");
+	the_controller = NULL;
+}
+
+static struct net2272 * __devinit
+net2272_probe_init(struct device *dev, unsigned int irq)
+{
+	struct net2272 *ret;
+
+	if (the_controller) {
+		dev_warn(dev, "ignoring\n");
+		return ERR_PTR(-EBUSY);
+	}
+
+	if (!irq) {
+		dev_dbg(dev, "No IRQ!\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	/* alloc, and start init */
+	ret = kzalloc(sizeof(*ret), GFP_KERNEL);
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&ret->lock);
+	ret->irq = irq;
+	ret->dev = dev;
+	ret->gadget.ops = &net2272_ops;
+	ret->gadget.is_dualspeed = 1;
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&ret->gadget.dev, "gadget");
+	ret->gadget.dev.parent = dev;
+	ret->gadget.dev.dma_mask = dev->dma_mask;
+	ret->gadget.dev.release = net2272_gadget_release;
+	ret->gadget.name = driver_name;
+
+	return ret;
+}
+
+static int __devinit
+net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
+{
+	int ret;
+
+	/* See if there... */
+	if (net2272_present(dev)) {
+		dev_warn(dev->dev, "2272 not found!\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	net2272_usb_reset(dev);
+	net2272_usb_reinit(dev);
+
+	ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev);
+	if (ret) {
+		dev_err(dev->dev, "request interrupt %i failed\n", dev->irq);
+		goto err;
+	}
+
+	dev->chiprev = net2272_read(dev, CHIPREV_2272);
+
+	/* done */
+	dev_info(dev->dev, "%s\n", driver_desc);
+	dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n",
+		dev->irq, dev->base_addr, dev->chiprev,
+		dma_mode_string());
+	dev_info(dev->dev, "version: %s\n", driver_vers);
+
+	the_controller = dev;
+
+	ret = device_register(&dev->gadget.dev);
+	if (ret)
+		goto err_irq;
+	ret = device_create_file(dev->dev, &dev_attr_registers);
+	if (ret)
+		goto err_dev_reg;
+
+	return 0;
+
+ err_dev_reg:
+	device_unregister(&dev->gadget.dev);
+ err_irq:
+	free_irq(dev->irq, dev);
+ err:
+	return ret;
+}
+
+#ifdef CONFIG_PCI
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us
+ */
+
+static int __devinit
+net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len, tmp;
+	void __iomem *mem_mapped_addr[4];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds PLX 9054 config registers
+	 * BAR 1 is i/o memory; unused here
+	 * BAR 2 holds EPLD config registers
+	 * BAR 3 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces */
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap_nocache(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk1.plx9054_base_addr = mem_mapped_addr[0];
+	dev->rdk1.epld_base_addr = mem_mapped_addr[2];
+	dev->base_addr = mem_mapped_addr[3];
+
+	/* Set PLX 9054 bus width (16 bits) */
+	tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1);
+	writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT,
+			dev->rdk1.plx9054_base_addr + LBRD1);
+
+	/* Enable PLX 9054 Interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) |
+			(1 << PCI_INTERRUPT_ENABLE) |
+			(1 << LOCAL_INTERRUPT_INPUT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+	writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+
+	/* reset */
+	writeb((1 << EPLD_DMA_ENABLE) |
+		(1 << DMA_CTL_DACK) |
+		(1 << DMA_TIMEOUT_ENABLE) |
+		(1 << USER) |
+		(0 << MPX_MODE) |
+		(1 << BUSWIDTH) |
+		(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+
+	mb();
+	writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) &
+		~(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+	udelay(200);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int __devinit
+net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len;
+	void __iomem *mem_mapped_addr[2];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds FGPA config registers
+	 * BAR 1 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces, bar2-3 unused in rdk 2 */
+	for (i = 0; i < 2; ++i) {
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap_nocache(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk2.fpga_base_addr = mem_mapped_addr[0];
+	dev->base_addr = mem_mapped_addr[1];
+
+	mb();
+	/* Set 2272 bus width (16 bits) and reset */
+	writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	udelay(200);
+	writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	/* Print fpga version number */
+	dev_info(dev->dev, "RDK2 FPGA version %08x\n",
+		readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV));
+	/* Enable FPGA Interrupts */
+	writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int __devinit
+net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct net2272 *dev;
+	int ret;
+
+	dev = net2272_probe_init(&pdev->dev, pdev->irq);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+	dev->dev_id = pdev->device;
+
+	if (pci_enable_device(pdev) < 0) {
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	pci_set_master(pdev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break;
+	default: BUG();
+	}
+	if (ret)
+		goto err_pci;
+
+	ret = net2272_probe_fin(dev, 0);
+	if (ret)
+		goto err_pci;
+
+	pci_set_drvdata(pdev, dev);
+
+	return 0;
+
+ err_pci:
+	pci_disable_device(pdev);
+ err_free:
+	kfree(dev);
+
+	return ret;
+}
+
+static void __devexit
+net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable PLX 9054 interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+		~(1 << PCI_INTERRUPT_ENABLE),
+		dev->rdk1.plx9054_base_addr + INTCSR);
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk1.plx9054_base_addr);
+	iounmap(dev->rdk1.epld_base_addr);
+
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+}
+
+static void __devexit
+net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable fpga interrupts
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+			~(1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	*/
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk2.fpga_base_addr);
+
+	for (i = 0; i < 2; ++i)
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+}
+
+static void __devexit
+net2272_pci_remove(struct pci_dev *pdev)
+{
+	struct net2272 *dev = pci_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break;
+	default: BUG();
+	}
+
+	pci_disable_device(pdev);
+
+	kfree(dev);
+}
+
+/* Table of matching PCI IDs */
+static struct pci_device_id __devinitdata pci_ids[] = {
+	{	/* RDK 1 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK1,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{	/* RDK 2 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK2,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver net2272_pci_driver = {
+	.name     = driver_name,
+	.id_table = pci_ids,
+
+	.probe    = net2272_pci_probe,
+	.remove   = __devexit_p(net2272_pci_remove),
+};
+
+#else
+# define pci_register_driver(x) 1
+# define pci_unregister_driver(x) 1
+#endif
+
+/*---------------------------------------------------------------------------*/
+
+static int __devinit
+net2272_plat_probe(struct platform_device *pdev)
+{
+	struct net2272 *dev;
+	int ret;
+	unsigned int irqflags;
+	resource_size_t base, len;
+	struct resource *iomem, *iomem_bus, *irq_res;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0);
+	if (!irq_res || !iomem) {
+		dev_err(&pdev->dev, "must provide irq/base addr");
+		return -EINVAL;
+	}
+
+	dev = net2272_probe_init(&pdev->dev, irq_res->start);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	irqflags = 0;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irqflags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irqflags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irqflags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irqflags |= IRQF_TRIGGER_LOW;
+
+	base = iomem->start;
+	len = resource_size(iomem);
+	if (iomem_bus)
+		dev->base_shift = iomem_bus->start;
+
+	if (!request_mem_region(base, len, driver_name)) {
+		dev_dbg(dev->dev, "get request memory region!\n");
+		ret = -EBUSY;
+		goto err;
+	}
+	dev->base_addr = ioremap_nocache(base, len);
+	if (!dev->base_addr) {
+		dev_dbg(dev->dev, "can't map memory\n");
+		ret = -EFAULT;
+		goto err_req;
+	}
+
+	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	if (ret)
+		goto err_io;
+
+	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n",
+		(net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no ");
+
+	the_controller = dev;
+
+	return 0;
+
+ err_io:
+	iounmap(dev->base_addr);
+ err_req:
+	release_mem_region(base, len);
+ err:
+	return ret;
+}
+
+static int __devexit
+net2272_plat_remove(struct platform_device *pdev)
+{
+	struct net2272 *dev = platform_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	release_mem_region(pdev->resource[0].start,
+		resource_size(&pdev->resource[0]));
+
+	kfree(dev);
+
+	return 0;
+}
+
+static struct platform_driver net2272_plat_driver = {
+	.probe   = net2272_plat_probe,
+	.remove  = __devexit_p(net2272_plat_remove),
+	.driver  = {
+		.name  = driver_name,
+		.owner = THIS_MODULE,
+	},
+	/* FIXME .suspend, .resume */
+};
+
+static int __init net2272_init(void)
+{
+	return pci_register_driver(&net2272_pci_driver) &
+		platform_driver_register(&net2272_plat_driver);
+}
+module_init(net2272_init);
+
+static void __exit net2272_cleanup(void)
+{
+	pci_unregister_driver(&net2272_pci_driver);
+	platform_driver_unregister(&net2272_plat_driver);
+}
+module_exit(net2272_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("PLX Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/net2272.h b/drivers/usb/gadget/net2272.h
new file mode 100644
index 000000000000..e59505789359
--- /dev/null
+++ b/drivers/usb/gadget/net2272.h
@@ -0,0 +1,601 @@
+/*
+ * PLX NET2272 high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __NET2272_H__
+#define __NET2272_H__
+
+/* Main Registers */
+#define REGADDRPTR			0x00
+#define REGDATA				0x01
+#define IRQSTAT0			0x02
+#define 	ENDPOINT_0_INTERRUPT			0
+#define 	ENDPOINT_A_INTERRUPT			1
+#define 	ENDPOINT_B_INTERRUPT			2
+#define 	ENDPOINT_C_INTERRUPT			3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT		4
+#define 	SETUP_PACKET_INTERRUPT			5
+#define 	DMA_DONE_INTERRUPT			6
+#define 	SOF_INTERRUPT				7
+#define IRQSTAT1			0x03
+#define 	CONTROL_STATUS_INTERRUPT		1
+#define 	VBUS_INTERRUPT				2
+#define 	SUSPEND_REQUEST_INTERRUPT		3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT	4
+#define 	RESUME_INTERRUPT			5
+#define 	ROOT_PORT_RESET_INTERRUPT		6
+#define 	RESET_STATUS				7
+#define PAGESEL				0x04
+#define DMAREQ				0x1c
+#define 	DMA_ENDPOINT_SELECT			0
+#define 	DREQ_POLARITY				1
+#define 	DACK_POLARITY				2
+#define 	EOT_POLARITY				3
+#define 	DMA_CONTROL_DACK			4
+#define 	DMA_REQUEST_ENABLE			5
+#define 	DMA_REQUEST				6
+#define 	DMA_BUFFER_VALID			7
+#define SCRATCH				0x1d
+#define IRQENB0				0x20
+#define 	ENDPOINT_0_INTERRUPT_ENABLE		0
+#define 	ENDPOINT_A_INTERRUPT_ENABLE		1
+#define 	ENDPOINT_B_INTERRUPT_ENABLE		2
+#define 	ENDPOINT_C_INTERRUPT_ENABLE		3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE	4
+#define 	SETUP_PACKET_INTERRUPT_ENABLE		5
+#define 	DMA_DONE_INTERRUPT_ENABLE		6
+#define 	SOF_INTERRUPT_ENABLE			7
+#define IRQENB1				0x21
+#define 	VBUS_INTERRUPT_ENABLE			2
+#define 	SUSPEND_REQUEST_INTERRUPT_ENABLE	3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE	4
+#define 	RESUME_INTERRUPT_ENABLE			5
+#define 	ROOT_PORT_RESET_INTERRUPT_ENABLE	6
+#define LOCCTL				0x22
+#define 	DATA_WIDTH				0
+#define 	LOCAL_CLOCK_OUTPUT			1
+#define 		LOCAL_CLOCK_OUTPUT_OFF			0
+#define 		LOCAL_CLOCK_OUTPUT_3_75MHZ		1
+#define 		LOCAL_CLOCK_OUTPUT_7_5MHZ		2
+#define 		LOCAL_CLOCK_OUTPUT_15MHZ		3
+#define 		LOCAL_CLOCK_OUTPUT_30MHZ		4
+#define 		LOCAL_CLOCK_OUTPUT_60MHZ		5
+#define 	DMA_SPLIT_BUS_MODE			4
+#define 	BYTE_SWAP				5
+#define 	BUFFER_CONFIGURATION			6
+#define 		BUFFER_CONFIGURATION_EPA512_EPB512	0
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB512	1
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB1024	2
+#define 		BUFFER_CONFIGURATION_EPA1024DB		3
+#define CHIPREV_LEGACY			0x23
+#define 		NET2270_LEGACY_REV			0x40
+#define LOCCTL1				0x24
+#define 	DMA_MODE				0
+#define 		SLOW_DREQ				0
+#define 		FAST_DREQ				1
+#define 		BURST_MODE				2
+#define 	DMA_DACK_ENABLE				2
+#define CHIPREV_2272			0x25
+#define 		CHIPREV_NET2272_R1			0x10
+#define 		CHIPREV_NET2272_R1A			0x11
+/* USB Registers */
+#define USBCTL0				0x18
+#define 	IO_WAKEUP_ENABLE			1
+#define 	USB_DETECT_ENABLE			3
+#define 	USB_ROOT_PORT_WAKEUP_ENABLE		5
+#define USBCTL1				0x19
+#define 	VBUS_PIN				0
+#define 		USB_FULL_SPEED				1
+#define 		USB_HIGH_SPEED				2
+#define 	GENERATE_RESUME				3
+#define 	VIRTUAL_ENDPOINT_ENABLE			4
+#define FRAME0				0x1a
+#define FRAME1				0x1b
+#define OURADDR				0x30
+#define 	FORCE_IMMEDIATE				7
+#define USBDIAG				0x31
+#define 	FORCE_TRANSMIT_CRC_ERROR		0
+#define 	PREVENT_TRANSMIT_BIT_STUFF		1
+#define 	FORCE_RECEIVE_ERROR			2
+#define 	FAST_TIMES				4
+#define USBTEST				0x32
+#define 	TEST_MODE_SELECT			0
+#define 		NORMAL_OPERATION			0
+#define 		TEST_J					1
+#define 		TEST_K					2
+#define 		TEST_SE0_NAK				3
+#define 		TEST_PACKET				4
+#define 		TEST_FORCE_ENABLE			5
+#define XCVRDIAG			0x33
+#define 	FORCE_FULL_SPEED			2
+#define 	FORCE_HIGH_SPEED			3
+#define 	OPMODE					4
+#define 		NORMAL_OPERATION			0
+#define 		NON_DRIVING				1
+#define 		DISABLE_BITSTUFF_AND_NRZI_ENCODE	2
+#define 	LINESTATE				6
+#define 		SE0_STATE				0
+#define 		J_STATE					1
+#define 		K_STATE					2
+#define 		SE1_STATE				3
+#define VIRTOUT0			0x34
+#define VIRTOUT1			0x35
+#define VIRTIN0				0x36
+#define VIRTIN1				0x37
+#define SETUP0				0x40
+#define SETUP1				0x41
+#define SETUP2				0x42
+#define SETUP3				0x43
+#define SETUP4				0x44
+#define SETUP5				0x45
+#define SETUP6				0x46
+#define SETUP7				0x47
+/* Endpoint Registers (Paged via PAGESEL) */
+#define EP_DATA				0x05
+#define EP_STAT0			0x06
+#define 	DATA_IN_TOKEN_INTERRUPT			0
+#define 	DATA_OUT_TOKEN_INTERRUPT		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT		3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT	4
+#define 	NAK_OUT_PACKETS				5
+#define 	BUFFER_EMPTY				6
+#define 	BUFFER_FULL				7
+#define EP_STAT1			0x07
+#define 	TIMEOUT					0
+#define 	USB_OUT_ACK_SENT			1
+#define 	USB_OUT_NAK_SENT			2
+#define 	USB_IN_ACK_RCVD				3
+#define 	USB_IN_NAK_SENT				4
+#define 	USB_STALL_SENT				5
+#define 	LOCAL_OUT_ZLP				6
+#define 	BUFFER_FLUSH				7
+#define EP_TRANSFER0			0x08
+#define EP_TRANSFER1			0x09
+#define EP_TRANSFER2			0x0a
+#define EP_IRQENB			0x0b
+#define 	DATA_IN_TOKEN_INTERRUPT_ENABLE		0
+#define 	DATA_OUT_TOKEN_INTERRUPT_ENABLE		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT_ENABLE	3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE	4
+#define EP_AVAIL0			0x0c
+#define EP_AVAIL1			0x0d
+#define EP_RSPCLR			0x0e
+#define EP_RSPSET			0x0f
+#define 	ENDPOINT_HALT				0
+#define 	ENDPOINT_TOGGLE				1
+#define 	NAK_OUT_PACKETS_MODE			2
+#define 	CONTROL_STATUS_PHASE_HANDSHAKE		3
+#define 	INTERRUPT_MODE				4
+#define 	AUTOVALIDATE				5
+#define 	HIDE_STATUS_PHASE			6
+#define 	ALT_NAK_OUT_PACKETS			7
+#define EP_MAXPKT0			0x28
+#define EP_MAXPKT1			0x29
+#define 	ADDITIONAL_TRANSACTION_OPPORTUNITIES	3
+#define 		NONE_ADDITIONAL_TRANSACTION		0
+#define 		ONE_ADDITIONAL_TRANSACTION		1
+#define 		TWO_ADDITIONAL_TRANSACTION		2
+#define EP_CFG				0x2a
+#define 	ENDPOINT_NUMBER				0
+#define 	ENDPOINT_DIRECTION			4
+#define 	ENDPOINT_TYPE				5
+#define 	ENDPOINT_ENABLE				7
+#define EP_HBW				0x2b
+#define 	HIGH_BANDWIDTH_OUT_TRANSACTION_PID	0
+#define 		DATA0_PID				0
+#define 		DATA1_PID				1
+#define 		DATA2_PID				2
+#define 		MDATA_PID				3
+#define EP_BUFF_STATES			0x2c
+#define 	BUFFER_A_STATE				0
+#define 	BUFFER_B_STATE				2
+#define 		BUFF_FREE				0
+#define 		BUFF_VALID				1
+#define 		BUFF_LCL				2
+#define 		BUFF_USB				3
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK1	0x9054
+
+/* PCI-RDK EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1		0x00000000
+#define 	RDK_EPLD_USB_RESET				0
+#define 	RDK_EPLD_USB_POWERDOWN				1
+#define 	RDK_EPLD_USB_WAKEUP				2
+#define 	RDK_EPLD_USB_EOT				3
+#define 	RDK_EPLD_DPPULL					4
+#define RDK_EPLD_IO_REGISTER2		0x00000004
+#define 	RDK_EPLD_BUSWIDTH				0
+#define 	RDK_EPLD_USER					2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE			3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE			4
+#define RDK_EPLD_STATUS_REGISTER	0x00000008
+#define 	RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER	0x0000000c
+
+/* PCI-RDK PLX 9054 Registers */
+#define INTCSR				0x68
+#define 	PCI_INTERRUPT_ENABLE				8
+#define 	LOCAL_INTERRUPT_INPUT_ENABLE			11
+#define 	LOCAL_INPUT_INTERRUPT_ACTIVE			15
+#define 	LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE		18
+#define 	LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE		19
+#define 	DMA_CHANNEL_0_INTERRUPT_ACTIVE			21
+#define 	DMA_CHANNEL_1_INTERRUPT_ACTIVE			22
+#define CNTRL				0x6C
+#define 	RELOAD_CONFIGURATION_REGISTERS			29
+#define 	PCI_ADAPTER_SOFTWARE_RESET			30
+#define DMAMODE0			0x80
+#define 	LOCAL_BUS_WIDTH					0
+#define 	INTERNAL_WAIT_STATES				2
+#define 	TA_READY_INPUT_ENABLE				6
+#define 	LOCAL_BURST_ENABLE				8
+#define 	SCATTER_GATHER_MODE				9
+#define 	DONE_INTERRUPT_ENABLE				10
+#define 	LOCAL_ADDRESSING_MODE				11
+#define 	DEMAND_MODE					12
+#define 	DMA_EOT_ENABLE					14
+#define 	FAST_SLOW_TERMINATE_MODE_SELECT			15
+#define 	DMA_CHANNEL_INTERRUPT_SELECT			17
+#define DMAPADR0			0x84
+#define DMALADR0			0x88
+#define DMASIZ0				0x8c
+#define DMADPR0				0x90
+#define 	DESCRIPTOR_LOCATION				0
+#define 	END_OF_CHAIN					1
+#define 	INTERRUPT_AFTER_TERMINAL_COUNT			2
+#define 	DIRECTION_OF_TRANSFER				3
+#define DMACSR0				0xa8
+#define 	CHANNEL_ENABLE					0
+#define 	CHANNEL_START					1
+#define 	CHANNEL_ABORT					2
+#define 	CHANNEL_CLEAR_INTERRUPT				3
+#define 	CHANNEL_DONE					4
+#define DMATHR				0xb0
+#define LBRD1				0xf8
+#define 	MEMORY_SPACE_LOCAL_BUS_WIDTH			0
+#define 	W8_BIT						0
+#define 	W16_BIT						1
+
+/* Special OR'ing of INTCSR bits */
+#define LOCAL_INTERRUPT_TEST \
+	((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
+
+#define DMA_CHANNEL_0_TEST \
+	((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
+
+#define DMA_CHANNEL_1_TEST \
+	((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
+
+/* EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1			0x00000000
+#define 	RDK_EPLD_USB_RESET			0
+#define 	RDK_EPLD_USB_POWERDOWN			1
+#define 	RDK_EPLD_USB_WAKEUP			2
+#define 	RDK_EPLD_USB_EOT			3
+#define 	RDK_EPLD_DPPULL				4
+#define RDK_EPLD_IO_REGISTER2			0x00000004
+#define 	RDK_EPLD_BUSWIDTH			0
+#define 	RDK_EPLD_USER				2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE		3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE		4
+#define RDK_EPLD_STATUS_REGISTER		0x00000008
+#define RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER		0x0000000c
+
+#define EPLD_IO_CONTROL_REGISTER		0x400
+#define 	NET2272_RESET				0
+#define 	BUSWIDTH				1
+#define 	MPX_MODE				3
+#define 	USER					4
+#define 	DMA_TIMEOUT_ENABLE			5
+#define 	DMA_CTL_DACK				6
+#define 	EPLD_DMA_ENABLE				7
+#define EPLD_DMA_CONTROL_REGISTER		0x800
+#define 	SPLIT_DMA_MODE				0
+#define 	SPLIT_DMA_DIRECTION			1
+#define 	SPLIT_DMA_ENABLE			2
+#define 	SPLIT_DMA_INTERRUPT_ENABLE		3
+#define 	SPLIT_DMA_INTERRUPT			4
+#define 	EPLD_DMA_MODE				5
+#define 	EPLD_DMA_CONTROLLER_ENABLE		7
+#define SPLIT_DMA_ADDRESS_LOW			0xc00
+#define SPLIT_DMA_ADDRESS_HIGH			0x1000
+#define SPLIT_DMA_BYTE_COUNT_LOW		0x1400
+#define SPLIT_DMA_BYTE_COUNT_HIGH		0x1800
+#define EPLD_REVISION_REGISTER			0x1c00
+#define SPLIT_DMA_RAM				0x4000
+#define DMA_RAM_SIZE				0x1000
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK2	0x3272
+
+/* PCI-RDK version 2 registers */
+
+/* Main Control Registers */
+
+#define RDK2_IRQENB			0x00
+#define RDK2_IRQSTAT			0x04
+#define 	PB7				23
+#define 	PB6				22
+#define 	PB5				21
+#define 	PB4				20
+#define 	PB3				19
+#define 	PB2				18
+#define 	PB1				17
+#define 	PB0				16
+#define 	GP3				23
+#define 	GP2				23
+#define 	GP1				23
+#define 	GP0				23
+#define 	DMA_RETRY_ABORT			6
+#define 	DMA_PAUSE_DONE			5
+#define 	DMA_ABORT_DONE			4
+#define 	DMA_OUT_FIFO_TRANSFER_DONE	3
+#define 	DMA_LOCAL_DONE			2
+#define 	DMA_PCI_DONE			1
+#define 	NET2272_PCI_IRQ			0
+
+#define RDK2_LOCCTLRDK			0x08
+#define 	CHIP_RESET			3
+#define 	SPLIT_DMA			2
+#define 	MULTIPLEX_MODE			1
+#define 	BUS_WIDTH			0
+
+#define RDK2_GPIOCTL			0x10
+#define 	GP3_OUT_ENABLE					7
+#define 	GP2_OUT_ENABLE					6
+#define 	GP1_OUT_ENABLE					5
+#define 	GP0_OUT_ENABLE					4
+#define 	GP3_DATA					3
+#define 	GP2_DATA					2
+#define 	GP1_DATA					1
+#define 	GP0_DATA					0
+
+#define RDK2_LEDSW			0x14
+#define 	LED3				27
+#define 	LED2				26
+#define 	LED1				25
+#define 	LED0				24
+#define 	PBUTTON				16
+#define 	DIPSW				0
+
+#define RDK2_DIAG			0x18
+#define 	RDK2_FAST_TIMES				2
+#define 	FORCE_PCI_SERR				1
+#define 	FORCE_PCI_INT				0
+#define RDK2_FPGAREV			0x1C
+
+/* Dma Control registers */
+#define RDK2_DMACTL			0x80
+#define 	ADDR_HOLD				24
+#define 	RETRY_COUNT				16	/* 23:16 */
+#define 	FIFO_THRESHOLD				11	/* 15:11 */
+#define 	MEM_WRITE_INVALIDATE			10
+#define 	READ_MULTIPLE				9
+#define 	READ_LINE				8
+#define 	RDK2_DMA_MODE				6	/* 7:6 */
+#define 	CONTROL_DACK				5
+#define 	EOT_ENABLE				4
+#define 	EOT_POLARITY				3
+#define 	DACK_POLARITY				2
+#define 	DREQ_POLARITY				1
+#define 	DMA_ENABLE				0
+
+#define RDK2_DMASTAT			0x84
+#define 	GATHER_COUNT				12	/* 14:12 */
+#define 	FIFO_COUNT				6	/* 11:6 */
+#define 	FIFO_FLUSH				5
+#define 	FIFO_TRANSFER				4
+#define 	PAUSE_DONE				3
+#define 	ABORT_DONE				2
+#define 	DMA_ABORT				1
+#define 	DMA_START				0
+
+#define RDK2_DMAPCICOUNT		0x88
+#define 	DMA_DIRECTION				31
+#define 	DMA_PCI_BYTE_COUNT			0	/* 0:23 */
+
+#define RDK2_DMALOCCOUNT		0x8C	/* 0:23 dma local byte count */
+
+#define RDK2_DMAADDR			0x90	/* 2:31 PCI bus starting address */
+
+/*---------------------------------------------------------------------------*/
+
+#define REG_INDEXED_THRESHOLD	(1 << 5)
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+struct net2272_ep {
+	struct usb_ep ep;
+	struct net2272 *dev;
+	unsigned long irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+	unsigned num:8,
+	         fifo_size:12,
+	         stopped:1,
+	         wedged:1,
+	         is_in:1,
+	         is_iso:1,
+	         dma:1,
+	         not_empty:1;
+};
+
+struct net2272 {
+	/* each device provides one gadget, several endpoints */
+	struct usb_gadget gadget;
+	struct device *dev;
+	unsigned short dev_id;
+
+	spinlock_t lock;
+	struct net2272_ep ep[4];
+	struct usb_gadget_driver *driver;
+	unsigned protocol_stall:1,
+	         softconnect:1,
+	         is_selfpowered:1,
+	         wakeup:1,
+	         dma_eot_polarity:1,
+	         dma_dack_polarity:1,
+	         dma_dreq_polarity:1,
+	         dma_busy:1;
+	u16 chiprev;
+	u8 pagesel;
+
+	unsigned int irq;
+	unsigned short fifo_mode;
+
+	unsigned int base_shift;
+	u16 __iomem *base_addr;
+	union {
+#ifdef CONFIG_PCI
+		struct {
+			void __iomem *plx9054_base_addr;
+			void __iomem *epld_base_addr;
+		} rdk1;
+		struct {
+			/* Bar0, Bar1 is base_addr both mem-mapped */
+			void __iomem *fpga_base_addr;
+		} rdk2;
+#endif
+	};
+};
+
+static void __iomem *
+net2272_reg_addr(struct net2272 *dev, unsigned int reg)
+{
+	return dev->base_addr + (reg << dev->base_shift);
+}
+
+static void
+net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
+{
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		writeb(value, net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		writeb(value, net2272_reg_addr(dev, reg));
+}
+
+static u8
+net2272_read(struct net2272 *dev, unsigned int reg)
+{
+	u8 ret;
+
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		ret = readb(net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		ret = readb(net2272_reg_addr(dev, reg));
+
+	return ret;
+}
+
+static void
+net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	net2272_write(dev, reg, value);
+}
+
+static u8
+net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	return net2272_read(dev, reg);
+}
+
+static void allow_status(struct net2272_ep *ep)
+{
+	/* ep0 only */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
+		(1 << ALT_NAK_OUT_PACKETS) |
+		(1 << NAK_OUT_PACKETS_MODE));
+	ep->stopped = 1;
+}
+
+static void set_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
+	net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
+}
+
+static void clear_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
+{
+	/* net2272_ep_write will truncate to u8 for us */
+	net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
+	net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
+	net2272_ep_write(ep, EP_TRANSFER0, count);
+}
+
+struct net2272_request {
+	struct usb_request req;
+	struct list_head queue;
+	unsigned mapped:1,
+	         valid:1;
+};
+
+#endif