USB: make hcd.h public (drivers dependency)

The usbcore headers: hcd.h and hub.h are shared between usbcore,
HCDs and a couple of other drivers (e.g. USBIP modules).
So, it makes sense to move them into a more public location and
to cleanup dependency of those modules on kernel internal headers.
This patch moves hcd.h from drivers/usb/core into include/linux/usb/

Signed-of-by: Eric Lescouet <eric@lescouet.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

41 files changed, 43 insertions, 627 deletions

diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index e8c6d94b2514..74e44621e313 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "c67x00.h"
 
 /*
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 3ba2fff71490..2c6965484fe8 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -14,7 +14,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/usb.h>
-#include "hcd.h"
+#include <linux/usb/hcd.h>
 
 
 /*
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 0d3af6a6ee49..77e0dda3a2fb 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -1,12 +1,13 @@
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
+#include <linux/usb/hcd.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <asm/byteorder.h>
 #include "usb.h"
-#include "hcd.h"
+
 
 #define USB_MAXALTSETTING		128	/* Hard limit */
 #define USB_MAXENDPOINTS		30	/* Hard limit */
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 19bc03a9fecf..75077215a8b8 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -55,11 +55,11 @@
 #include <linux/usb.h>
 #include <linux/smp_lock.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
 
 #include "usb.h"
-#include "hcd.h"
 
 /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
 #define ALLOW_SERIAL_NUMBER
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 3466fdc5bb11..c2f62a3993d2 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -43,6 +43,7 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
 #include <linux/cdev.h>
 #include <linux/notifier.h>
 #include <linux/security.h>
@@ -50,9 +51,7 @@
 #include <asm/byteorder.h>
 #include <linux/moduleparam.h>
 
-#include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
-#include "hub.h"
 
 #define USB_MAXBUS			64
 #define USB_DEVICE_MAX			USB_MAXBUS * 128
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2f3dc4cdf79b..edff55a32575 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -26,8 +26,9 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
 #include <linux/pm_runtime.h>
-#include "hcd.h"
+
 #include "usb.h"
 
 
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 2c95153c0f24..9a34ccb0a1c0 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -18,8 +18,8 @@
  */
 
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include "usb.h"
-#include "hcd.h"
 
 static inline const char *plural(int n)
 {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 15286533c15a..1cf2d1e79a5c 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -33,7 +34,6 @@
 #endif
 
 #include "usb.h"
-#include "hcd.h"
 
 
 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 2f8cedda8007..4a24843cfc61 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -42,10 +42,9 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include "usb.h"
-#include "hcd.h"
-#include "hub.h"
 
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
deleted file mode 100644
index a3cdb09734ab..000000000000
--- a/drivers/usb/core/hcd.h
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- * Copyright (c) 2001-2002 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __USB_CORE_HCD_H
-#define __USB_CORE_HCD_H
-
-#ifdef __KERNEL__
-
-#include <linux/rwsem.h>
-
-#define MAX_TOPO_LEVEL		6
-
-/* This file contains declarations of usbcore internals that are mostly
- * used or exposed by Host Controller Drivers.
- */
-
-/*
- * USB Packet IDs (PIDs)
- */
-#define USB_PID_EXT			0xf0	/* USB 2.0 LPM ECN */
-#define USB_PID_OUT			0xe1
-#define USB_PID_ACK			0xd2
-#define USB_PID_DATA0			0xc3
-#define USB_PID_PING			0xb4	/* USB 2.0 */
-#define USB_PID_SOF			0xa5
-#define USB_PID_NYET			0x96	/* USB 2.0 */
-#define USB_PID_DATA2			0x87	/* USB 2.0 */
-#define USB_PID_SPLIT			0x78	/* USB 2.0 */
-#define USB_PID_IN			0x69
-#define USB_PID_NAK			0x5a
-#define USB_PID_DATA1			0x4b
-#define USB_PID_PREAMBLE		0x3c	/* Token mode */
-#define USB_PID_ERR			0x3c	/* USB 2.0: handshake mode */
-#define USB_PID_SETUP			0x2d
-#define USB_PID_STALL			0x1e
-#define USB_PID_MDATA			0x0f	/* USB 2.0 */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * USB Host Controller Driver (usb_hcd) framework
- *
- * Since "struct usb_bus" is so thin, you can't share much code in it.
- * This framework is a layer over that, and should be more sharable.
- *
- * @authorized_default: Specifies if new devices are authorized to
- *                      connect by default or they require explicit
- *                      user space authorization; this bit is settable
- *                      through /sys/class/usb_host/X/authorized_default.
- *                      For the rest is RO, so we don't lock to r/w it.
- */
-
-/*-------------------------------------------------------------------------*/
-
-struct usb_hcd {
-
-	/*
-	 * housekeeping
-	 */
-	struct usb_bus		self;		/* hcd is-a bus */
-	struct kref		kref;		/* reference counter */
-
-	const char		*product_desc;	/* product/vendor string */
-	char			irq_descr[24];	/* driver + bus # */
-
-	struct timer_list	rh_timer;	/* drives root-hub polling */
-	struct urb		*status_urb;	/* the current status urb */
-#ifdef CONFIG_USB_SUSPEND
-	struct work_struct	wakeup_work;	/* for remote wakeup */
-#endif
-
-	/*
-	 * hardware info/state
-	 */
-	const struct hc_driver	*driver;	/* hw-specific hooks */
-
-	/* Flags that need to be manipulated atomically */
-	unsigned long		flags;
-#define HCD_FLAG_HW_ACCESSIBLE	0x00000001
-#define HCD_FLAG_SAW_IRQ	0x00000002
-
-	unsigned		rh_registered:1;/* is root hub registered? */
-
-	/* The next flag is a stopgap, to be removed when all the HCDs
-	 * support the new root-hub polling mechanism. */
-	unsigned		uses_new_polling:1;
-	unsigned		poll_rh:1;	/* poll for rh status? */
-	unsigned		poll_pending:1;	/* status has changed? */
-	unsigned		wireless:1;	/* Wireless USB HCD */
-	unsigned		authorized_default:1;
-	unsigned		has_tt:1;	/* Integrated TT in root hub */
-
-	int			irq;		/* irq allocated */
-	void __iomem		*regs;		/* device memory/io */
-	u64			rsrc_start;	/* memory/io resource start */
-	u64			rsrc_len;	/* memory/io resource length */
-	unsigned		power_budget;	/* in mA, 0 = no limit */
-
-	/* bandwidth_mutex should be taken before adding or removing
-	 * any new bus bandwidth constraints:
-	 *   1. Before adding a configuration for a new device.
-	 *   2. Before removing the configuration to put the device into
-	 *      the addressed state.
-	 *   3. Before selecting a different configuration.
-	 *   4. Before selecting an alternate interface setting.
-	 *
-	 * bandwidth_mutex should be dropped after a successful control message
-	 * to the device, or resetting the bandwidth after a failed attempt.
-	 */
-	struct mutex		bandwidth_mutex;
-
-
-#define HCD_BUFFER_POOLS	4
-	struct dma_pool		*pool [HCD_BUFFER_POOLS];
-
-	int			state;
-#	define	__ACTIVE		0x01
-#	define	__SUSPEND		0x04
-#	define	__TRANSIENT		0x80
-
-#	define	HC_STATE_HALT		0
-#	define	HC_STATE_RUNNING	(__ACTIVE)
-#	define	HC_STATE_QUIESCING	(__SUSPEND|__TRANSIENT|__ACTIVE)
-#	define	HC_STATE_RESUMING	(__SUSPEND|__TRANSIENT)
-#	define	HC_STATE_SUSPENDED	(__SUSPEND)
-
-#define	HC_IS_RUNNING(state) ((state) & __ACTIVE)
-#define	HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
-
-	/* more shared queuing code would be good; it should support
-	 * smarter scheduling, handle transaction translators, etc;
-	 * input size of periodic table to an interrupt scheduler.
-	 * (ohci 32, uhci 1024, ehci 256/512/1024).
-	 */
-
-	/* The HC driver's private data is stored at the end of
-	 * this structure.
-	 */
-	unsigned long hcd_priv[0]
-			__attribute__ ((aligned(sizeof(unsigned long))));
-};
-
-/* 2.4 does this a bit differently ... */
-static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
-{
-	return &hcd->self;
-}
-
-static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
-{
-	return container_of(bus, struct usb_hcd, self);
-}
-
-struct hcd_timeout {	/* timeouts we allocate */
-	struct list_head	timeout_list;
-	struct timer_list	timer;
-};
-
-/*-------------------------------------------------------------------------*/
-
-
-struct hc_driver {
-	const char	*description;	/* "ehci-hcd" etc */
-	const char	*product_desc;	/* product/vendor string */
-	size_t		hcd_priv_size;	/* size of private data */
-
-	/* irq handler */
-	irqreturn_t	(*irq) (struct usb_hcd *hcd);
-
-	int	flags;
-#define	HCD_MEMORY	0x0001		/* HC regs use memory (else I/O) */
-#define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
-#define	HCD_USB11	0x0010		/* USB 1.1 */
-#define	HCD_USB2	0x0020		/* USB 2.0 */
-#define	HCD_USB3	0x0040		/* USB 3.0 */
-#define	HCD_MASK	0x0070
-
-	/* called to init HCD and root hub */
-	int	(*reset) (struct usb_hcd *hcd);
-	int	(*start) (struct usb_hcd *hcd);
-
-	/* NOTE:  these suspend/resume calls relate to the HC as
-	 * a whole, not just the root hub; they're for PCI bus glue.
-	 */
-	/* called after suspending the hub, before entering D3 etc */
-	int	(*pci_suspend)(struct usb_hcd *hcd);
-
-	/* called after entering D0 (etc), before resuming the hub */
-	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
-
-	/* cleanly make HCD stop writing memory and doing I/O */
-	void	(*stop) (struct usb_hcd *hcd);
-
-	/* shutdown HCD */
-	void	(*shutdown) (struct usb_hcd *hcd);
-
-	/* return current frame number */
-	int	(*get_frame_number) (struct usb_hcd *hcd);
-
-	/* manage i/o requests, device state */
-	int	(*urb_enqueue)(struct usb_hcd *hcd,
-				struct urb *urb, gfp_t mem_flags);
-	int	(*urb_dequeue)(struct usb_hcd *hcd,
-				struct urb *urb, int status);
-
-	/* hw synch, freeing endpoint resources that urb_dequeue can't */
-	void 	(*endpoint_disable)(struct usb_hcd *hcd,
-			struct usb_host_endpoint *ep);
-
-	/* (optional) reset any endpoint state such as sequence number
-	   and current window */
-	void 	(*endpoint_reset)(struct usb_hcd *hcd,
-			struct usb_host_endpoint *ep);
-
-	/* root hub support */
-	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
-	int	(*hub_control) (struct usb_hcd *hcd,
-				u16 typeReq, u16 wValue, u16 wIndex,
-				char *buf, u16 wLength);
-	int	(*bus_suspend)(struct usb_hcd *);
-	int	(*bus_resume)(struct usb_hcd *);
-	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
-
-		/* force handover of high-speed port to full-speed companion */
-	void	(*relinquish_port)(struct usb_hcd *, int);
-		/* has a port been handed over to a companion? */
-	int	(*port_handed_over)(struct usb_hcd *, int);
-
-		/* CLEAR_TT_BUFFER completion callback */
-	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
-				struct usb_host_endpoint *);
-
-	/* xHCI specific functions */
-		/* Called by usb_alloc_dev to alloc HC device structures */
-	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
-		/* Called by usb_disconnect to free HC device structures */
-	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
-
-	/* Bandwidth computation functions */
-	/* Note that add_endpoint() can only be called once per endpoint before
-	 * check_bandwidth() or reset_bandwidth() must be called.
-	 * drop_endpoint() can only be called once per endpoint also.
-	 * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
-	 * add the endpoint to the schedule with possibly new parameters denoted by a
-	 * different endpoint descriptor in usb_host_endpoint.
-	 * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
-	 * not allowed.
-	 */
-		/* Allocate endpoint resources and add them to a new schedule */
-	int 	(*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
-		/* Drop an endpoint from a new schedule */
-	int 	(*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
-		/* Check that a new hardware configuration, set using
-		 * endpoint_enable and endpoint_disable, does not exceed bus
-		 * bandwidth.  This must be called before any set configuration
-		 * or set interface requests are sent to the device.
-		 */
-	int	(*check_bandwidth)(struct usb_hcd *, struct usb_device *);
-		/* Reset the device schedule to the last known good schedule,
-		 * which was set from a previous successful call to
-		 * check_bandwidth().  This reverts any add_endpoint() and
-		 * drop_endpoint() calls since that last successful call.
-		 * Used for when a check_bandwidth() call fails due to resource
-		 * or bandwidth constraints.
-		 */
-	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
-		/* Returns the hardware-chosen device address */
-	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
-		/* Notifies the HCD after a hub descriptor is fetched.
-		 * Will block.
-		 */
-	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
-			struct usb_tt *tt, gfp_t mem_flags);
-	int	(*reset_device)(struct usb_hcd *, struct usb_device *);
-};
-
-extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
-extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
-		int status);
-extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
-
-extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
-extern int usb_hcd_unlink_urb(struct urb *urb, int status);
-extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
-		int status);
-extern void usb_hcd_flush_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_disable_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_reset_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
-extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
-		struct usb_host_config *new_config,
-		struct usb_host_interface *old_alt,
-		struct usb_host_interface *new_alt);
-extern int usb_hcd_get_frame_number(struct usb_device *udev);
-
-extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
-		struct device *dev, const char *bus_name);
-extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
-extern void usb_put_hcd(struct usb_hcd *hcd);
-extern int usb_add_hcd(struct usb_hcd *hcd,
-		unsigned int irqnum, unsigned long irqflags);
-extern void usb_remove_hcd(struct usb_hcd *hcd);
-
-struct platform_device;
-extern void usb_hcd_platform_shutdown(struct platform_device *dev);
-
-#ifdef CONFIG_PCI
-struct pci_dev;
-struct pci_device_id;
-extern int usb_hcd_pci_probe(struct pci_dev *dev,
-				const struct pci_device_id *id);
-extern void usb_hcd_pci_remove(struct pci_dev *dev);
-extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
-
-#ifdef CONFIG_PM_SLEEP
-extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
-#endif
-#endif /* CONFIG_PCI */
-
-/* pci-ish (pdev null is ok) buffer alloc/mapping support */
-int hcd_buffer_create(struct usb_hcd *hcd);
-void hcd_buffer_destroy(struct usb_hcd *hcd);
-
-void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
-	gfp_t mem_flags, dma_addr_t *dma);
-void hcd_buffer_free(struct usb_bus *bus, size_t size,
-	void *addr, dma_addr_t dma);
-
-/* generic bus glue, needed for host controllers that don't use PCI */
-extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
-
-extern void usb_hc_died(struct usb_hcd *hcd);
-extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
-
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
-		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
-		 ((bit) << (ep)))
-
-/* -------------------------------------------------------------------------- */
-
-/* Enumeration is only for the hub driver, or HCD virtual root hubs */
-extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
-					struct usb_bus *, unsigned port);
-extern int usb_new_device(struct usb_device *dev);
-extern void usb_disconnect(struct usb_device **);
-
-extern int usb_get_configuration(struct usb_device *dev);
-extern void usb_destroy_configuration(struct usb_device *dev);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * HCD Root Hub support
- */
-
-#include "hub.h"
-
-/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
-#define DeviceRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-#define DeviceOutRequest \
-	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-
-#define InterfaceRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-
-#define EndpointRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-#define EndpointOutRequest \
-	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-
-/* class requests from the USB 2.0 hub spec, table 11-15 */
-/* GetBusState and SetHubDescriptor are optional, omitted */
-#define ClearHubFeature		(0x2000 | USB_REQ_CLEAR_FEATURE)
-#define ClearPortFeature	(0x2300 | USB_REQ_CLEAR_FEATURE)
-#define GetHubDescriptor	(0xa000 | USB_REQ_GET_DESCRIPTOR)
-#define GetHubStatus		(0xa000 | USB_REQ_GET_STATUS)
-#define GetPortStatus		(0xa300 | USB_REQ_GET_STATUS)
-#define SetHubFeature		(0x2000 | USB_REQ_SET_FEATURE)
-#define SetPortFeature		(0x2300 | USB_REQ_SET_FEATURE)
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Generic bandwidth allocation constants/support
- */
-#define FRAME_TIME_USECS	1000L
-#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
-		/* Trying not to use worst-case bit-stuffing
-		 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
-		/* bytecount = data payload byte count */
-
-#define NS_TO_US(ns)	((ns + 500L) / 1000L)
-			/* convert & round nanoseconds to microseconds */
-
-
-/*
- * Full/low speed bandwidth allocation constants/support.
- */
-#define BW_HOST_DELAY	1000L		/* nanoseconds */
-#define BW_HUB_LS_SETUP	333L		/* nanoseconds */
-			/* 4 full-speed bit times (est.) */
-
-#define FRAME_TIME_BITS			12000L	/* frame = 1 millisecond */
-#define FRAME_TIME_MAX_BITS_ALLOC	(90L * FRAME_TIME_BITS / 100L)
-#define FRAME_TIME_MAX_USECS_ALLOC	(90L * FRAME_TIME_USECS / 100L)
-
-/*
- * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
- * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
- * to preallocate bandwidth)
- */
-#define USB2_HOST_DELAY	5	/* nsec, guess */
-#define HS_NSECS(bytes) (((55 * 8 * 2083) \
-	+ (2083UL * (3 + BitTime(bytes))))/1000 \
-	+ USB2_HOST_DELAY)
-#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
-	+ (2083UL * (3 + BitTime(bytes))))/1000 \
-	+ USB2_HOST_DELAY)
-#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
-#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
-
-extern long usb_calc_bus_time(int speed, int is_input,
-			int isoc, int bytecount);
-
-/*-------------------------------------------------------------------------*/
-
-extern void usb_set_device_state(struct usb_device *udev,
-		enum usb_device_state new_state);
-
-/*-------------------------------------------------------------------------*/
-
-/* exported only within usbcore */
-
-extern struct list_head usb_bus_list;
-extern struct mutex usb_bus_list_lock;
-extern wait_queue_head_t usb_kill_urb_queue;
-
-extern int usb_find_interface_driver(struct usb_device *dev,
-	struct usb_interface *interface);
-
-#define usb_endpoint_out(ep_dir)	(!((ep_dir) & USB_DIR_IN))
-
-#ifdef CONFIG_PM
-extern void usb_root_hub_lost_power(struct usb_device *rhdev);
-extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
-extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_USB_SUSPEND
-extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
-#else
-static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
-{
-	return;
-}
-#endif /* CONFIG_USB_SUSPEND */
-
-
-/*
- * USB device fs stuff
- */
-
-#ifdef CONFIG_USB_DEVICEFS
-
-/*
- * these are expected to be called from the USB core/hub thread
- * with the kernel lock held
- */
-extern void usbfs_update_special(void);
-extern int usbfs_init(void);
-extern void usbfs_cleanup(void);
-
-#else /* CONFIG_USB_DEVICEFS */
-
-static inline void usbfs_update_special(void) {}
-static inline int usbfs_init(void) { return 0; }
-static inline void usbfs_cleanup(void) { }
-
-#endif /* CONFIG_USB_DEVICEFS */
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
-
-struct usb_mon_operations {
-	void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
-	void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
-	void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
-	/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
-};
-
-extern struct usb_mon_operations *mon_ops;
-
-static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_submit)(bus, urb);
-}
-
-static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
-    int error)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_submit_error)(bus, urb, error);
-}
-
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
-		int status)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_complete)(bus, urb, status);
-}
-
-int usb_mon_register(struct usb_mon_operations *ops);
-void usb_mon_deregister(void);
-
-#else
-
-static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
-static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
-    int error) {}
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
-		int status) {}
-
-#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
-
-/*-------------------------------------------------------------------------*/
-
-/* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
-/* bleech -- resurfaced in 2.4.11 or 2.4.12 */
-#define bitmap 	DeviceRemovable
-
-
-/*-------------------------------------------------------------------------*/
-
-/* random stuff */
-
-#define	RUN_CONTEXT (in_irq() ? "in_irq" \
-		: (in_interrupt() ? "in_interrupt" : "can sleep"))
-
-
-/* This rwsem is for use only by the hub driver and ehci-hcd.
- * Nobody else should touch it.
- */
-extern struct rw_semaphore ehci_cf_port_reset_rwsem;
-
-/* Keep track of which host controller drivers are loaded */
-#define USB_UHCI_LOADED		0
-#define USB_OHCI_LOADED		1
-#define USB_EHCI_LOADED		2
-extern unsigned long usb_hcds_loaded;
-
-#endif /* __KERNEL__ */
-
-#endif /* __USB_CORE_HCD_H */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0940ccd6f4f4..1883c3c7b69b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -19,6 +19,7 @@
 #include <linux/ioctl.h>
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
@@ -28,8 +29,6 @@
 #include <asm/byteorder.h>
 
 #include "usb.h"
-#include "hcd.h"
-#include "hub.h"
 
 /* if we are in debug mode, always announce new devices */
 #ifdef DEBUG
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 111a01a747fc..1a27618b67d6 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -40,9 +40,9 @@
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
 #include <linux/smp_lock.h>
+#include <linux/usb/hcd.h>
 #include <asm/byteorder.h>
 #include "usb.h"
-#include "hcd.h"
 
 #define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO)
 #define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index cd220277c6c3..619c44fb8a96 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -14,9 +14,9 @@
 #include <linux/device.h>
 #include <linux/scatterlist.h>
 #include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
 #include <asm/byteorder.h>
 
-#include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
 
 static void cancel_async_set_config(struct usb_device *udev);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 45a32dadb406..09301f4b7225 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -6,7 +6,7 @@
 #include <linux/log2.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "hcd.h"
+#include <linux/usb/hcd.h>
 
 #define to_urb(d) container_of(d, struct urb, kref)
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0561430f2ede..1088abb4416c 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -32,6 +32,7 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
@@ -41,7 +42,6 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 
-#include "hcd.h"
 #include "usb.h"
 
 
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 5e0966485188..4f9e578cde9d 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -47,6 +47,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -55,9 +56,6 @@
 #include <asm/unaligned.h>
 
 
-#include "../core/hcd.h"
-
-
 #define DRIVER_DESC	"USB Host+Gadget Emulator"
 #define DRIVER_VERSION	"02 May 2005"
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 13ead00aecd5..ef3e88f0b3c3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -31,13 +31,12 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 
-#include "../core/hcd.h"
-
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index e799f86dab11..6fe550049119 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -20,7 +20,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 15379c636143..90453379a434 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -25,12 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <asm/qe.h>
 #include <asm/fsl_gtm.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 void fhci_start_sof_timer(struct fhci_hcd *fhci)
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 0cfaedc3e124..348fe62e94f7 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -22,9 +22,9 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/gpio.h>
 #include <asm/qe.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 /* virtual root hub specific descriptor */
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
index 5591bfb499d1..b0b88f57a5ac 100644
--- a/drivers/usb/host/fhci-mem.c
+++ b/drivers/usb/host/fhci-mem.c
@@ -21,7 +21,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 static void init_td(struct td *td)
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
index f73c92359beb..03be7494a476 100644
--- a/drivers/usb/host/fhci-q.c
+++ b/drivers/usb/host/fhci-q.c
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 /* maps the hardware error code to the USB error code */
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index ff43747a614f..4f2cbdcc0273 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -24,9 +24,9 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <asm/qe.h>
 #include <asm/fsl_gtm.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 57013479d7f7..7be548ca2183 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -22,7 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 #define DUMMY_BD_BUFFER  0xdeadbeef
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 72dae1c5ab38..649ab07308f2 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -25,8 +25,8 @@
 #include <linux/kfifo.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <asm/qe.h>
-#include "../core/hcd.h"
 
 #define USB_CLOCK	48000000
 
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 8a12f297645f..ca0e98d8e1f4 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -56,8 +56,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 #include "imx21-hcd.h"
 
 #ifdef DEBUG
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 92de71dc7729..d9e82123de2a 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -65,6 +65,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/isp116x.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -72,7 +73,6 @@
 #include <asm/system.h>
 #include <asm/byteorder.h>
 
-#include "../core/hcd.h"
 #include "isp116x.h"
 
 #define DRIVER_VERSION	"03 Nov 2005"
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 217fb5170200..acc157da7275 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -77,6 +77,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/isp1362.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/io.h>
@@ -95,7 +96,6 @@ module_param(dbg_level, int, 0);
 #define	STUB_DEBUG_FILE
 #endif
 
-#include "../core/hcd.h"
 #include "../core/usb.h"
 #include "isp1362.h"
 
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9f01293600b0..c7ac1d97d176 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
@@ -21,7 +22,6 @@
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
 
-#include "../core/hcd.h"
 #include "isp1760-hcd.h"
 
 static struct kmem_cache *qtd_cachep;
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 4293cfd28d61..42a094605c92 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -13,8 +13,8 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/usb/isp1760.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 #include "isp1760-hcd.h"
 
 #ifdef CONFIG_PPC_OF
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index afe59be23645..d15d2478493e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/workqueue.h>
@@ -43,7 +44,6 @@
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
-#include "../core/hcd.h"
 
 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index e62b30b3e429..2891203200ce 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -34,12 +34,11 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 
-#include "../core/hcd.h"
-
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d478ffad59b4..1398de140ead 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -33,6 +33,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -40,7 +41,6 @@
 #include <linux/slab.h>
 #include <asm/cacheflush.h>
 
-#include "../core/hcd.h"
 #include "r8a66597.h"
 
 MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 3b867a8af7b2..8f2f477890c4 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -45,6 +45,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/sl811.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -53,7 +54,6 @@
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
-#include "../core/hcd.h"
 #include "sl811.h"
 
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 228f2b070f2b..fbd7adafd61c 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -49,6 +49,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
@@ -56,7 +57,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/byteorder.h>
-#include "../core/hcd.h"
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
 	 * If you're going to try stuff like this, you need to split
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 09197067fe6b..6637e52736dd 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -38,6 +38,7 @@
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/bitops.h>
 #include <linux/dmi.h>
 
@@ -46,7 +47,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include "../core/hcd.h"
 #include "uhci-hcd.h"
 #include "pci-quirks.h"
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea389e9a4931..a7c4e1122902 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -26,8 +26,8 @@
 #include <linux/usb.h>
 #include <linux/timer.h>
 #include <linux/kernel.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
 
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 1edb6d361896..2300a51d48b7 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -73,7 +73,7 @@ static struct list_head ftdi_static_list;
 */
 #include "usb_u132.h"
 #include <asm/io.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
 	 * If you're going to try stuff like this, you need to split
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index e4af18b93c7d..812dc288bb8c 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -9,12 +9,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/slab.h>
 #include <linux/notifier.h>
 #include <linux/mutex.h>
 
 #include "usb_mon.h"
-#include "../core/hcd.h"
+
 
 static void mon_stop(struct mon_bus *mbus);
 static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ac17b004909b..1da14bf17a65 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -69,7 +69,7 @@ struct musb_ep;
 #include "musb_regs.h"
 
 #include "musb_gadget.h"
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "musb_host.h"
 
 
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 759cda55f7c3..3d94c4247f46 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -58,9 +58,7 @@
 #include <linux/mutex.h>
 #include <linux/kref.h>
 #include <linux/workqueue.h>
-/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not
- *        public */
-#include <linux/../../drivers/usb/core/hcd.h>
+#include <linux/usb/hcd.h>
 #include <linux/uwb.h>
 #include <linux/usb/wusb.h>