Merge 3.11-rc3 into char-misc-next.

This resolves a merge issue with:
	drivers/misc/mei/init.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

31 files changed, 161 insertions, 68 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4191db32f12c..4a8a1d68002c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -668,6 +668,15 @@ resubmit:
 static inline int
 hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
 {
+	/* Need to clear both directions for control ep */
+	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_CONTROL) {
+		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		if (status)
+			return status;
+	}
 	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
 			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
 			       tt, NULL, 0, 1000);
@@ -2848,6 +2857,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
 				USB_CTRL_SET_TIMEOUT);
 }
 
+/* Count of wakeup-enabled devices at or below udev */
+static unsigned wakeup_enabled_descendants(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+
+	return udev->do_remote_wakeup +
+			(hub ? hub->wakeup_enabled_descendants : 0);
+}
+
 /*
  * usb_port_suspend - suspend a usb device's upstream port
  * @udev: device that's no longer in active use, not a root hub
@@ -2888,8 +2906,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
  * Linux (2.6) currently has NO mechanisms to initiate that:  no khubd
  * timer, no SRP, no requests through sysfs.
  *
- * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get
- * suspended only when their bus goes into global suspend (i.e., the root
+ * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
+ * suspended until their bus goes into global suspend (i.e., the root
  * hub is suspended).  Nevertheless, we change @udev->state to
  * USB_STATE_SUSPENDED as this is the device's "logical" state.  The actual
  * upstream port setting is stored in @udev->port_is_suspended.
@@ -2960,15 +2978,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	/* see 7.1.7.6 */
 	if (hub_is_superspeed(hub->hdev))
 		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
-	else if (PMSG_IS_AUTO(msg))
-		status = set_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_SUSPEND);
+
 	/*
 	 * For system suspend, we do not need to enable the suspend feature
 	 * on individual USB-2 ports.  The devices will automatically go
 	 * into suspend a few ms after the root hub stops sending packets.
 	 * The USB 2.0 spec calls this "global suspend".
+	 *
+	 * However, many USB hubs have a bug: They don't relay wakeup requests
+	 * from a downstream port if the port's suspend feature isn't on.
+	 * Therefore we will turn on the suspend feature if udev or any of its
+	 * descendants is enabled for remote wakeup.
 	 */
+	else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
+		status = set_port_feature(hub->hdev, port1,
+				USB_PORT_FEAT_SUSPEND);
 	else {
 		really_suspend = false;
 		status = 0;
@@ -3003,15 +3027,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		if (!PMSG_IS_AUTO(msg))
 			status = 0;
 	} else {
-		/* device has up to 10 msec to fully suspend */
 		dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""),
 				udev->do_remote_wakeup);
-		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 		if (really_suspend) {
 			udev->port_is_suspended = 1;
+
+			/* device has up to 10 msec to fully suspend */
 			msleep(10);
 		}
+		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 	}
 
 	/*
@@ -3293,7 +3318,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	unsigned		port1;
 	int			status;
 
-	/* Warn if children aren't already suspended */
+	/*
+	 * Warn if children aren't already suspended.
+	 * Also, add up the number of wakeup-enabled descendants.
+	 */
+	hub->wakeup_enabled_descendants = 0;
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
 		struct usb_device	*udev;
 
@@ -3303,6 +3332,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 			if (PMSG_IS_AUTO(msg))
 				return -EBUSY;
 		}
+		if (udev)
+			hub->wakeup_enabled_descendants +=
+					wakeup_enabled_descendants(udev);
 	}
 
 	if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 6508e02b3dac..4e4790dea343 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -59,6 +59,9 @@ struct usb_hub {
 	struct usb_tt		tt;		/* Transaction Translator */
 
 	unsigned		mA_per_port;	/* current for each child */
+#ifdef	CONFIG_PM
+	unsigned		wakeup_enabled_descendants;
+#endif
 
 	unsigned		limited_power:1;
 	unsigned		quiescing:1;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 757aa18027d0..2378958ea63e 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,6 +1,6 @@
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
-	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
+	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c35d49d39b76..358375e0b291 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -450,7 +450,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	}
 
 	if (IS_ERR(dwc->usb3_phy)) {
-		ret = PTR_ERR(dwc->usb2_phy);
+		ret = PTR_ERR(dwc->usb3_phy);
 
 		/*
 		 * if -ENXIO is returned, it means PHY layer wasn't
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b69d322e3cab..27dad993b007 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -759,8 +759,8 @@ struct dwc3 {
 
 struct dwc3_event_type {
 	u32	is_devspec:1;
-	u32	type:6;
-	u32	reserved8_31:25;
+	u32	type:7;
+	u32	reserved8_31:24;
 } __packed;
 
 #define DWC3_DEPEVT_XFERCOMPLETE	0x01
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b5e5b35df49c..f77083fedc68 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1584,6 +1584,7 @@ err1:
 	__dwc3_gadget_ep_disable(dwc->eps[0]);
 
 err0:
+	dwc->gadget_driver = NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 62f6802f6e0f..8e9368330b10 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -193,6 +193,7 @@ config USB_FUSB300
 	   Faraday usb device controller FUSB300 driver
 
 config USB_FOTG210_UDC
+	depends on HAS_DMA
 	tristate "Faraday FOTG210 USB Peripheral Controller"
 	help
 	   Faraday USB2.0 OTG controller which can be configured as
@@ -328,13 +329,14 @@ config USB_S3C_HSUDC
 
 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	depends on GENERIC_HARDIRQS
+	depends on GENERIC_HARDIRQS && HAS_DMA
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
 	  full speed USB peripheral.
 
 config USB_MV_U3D
+	depends on HAS_DMA
 	tristate "MARVELL PXA2128 USB 3.0 controller"
 	help
 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
@@ -639,6 +641,7 @@ config USB_CONFIGFS_RNDIS
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
+	select USB_U_RNDIS
 	select USB_F_RNDIS
 	help
 	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 073b938f9135..d9a6add0c852 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -870,8 +870,8 @@ static void clk_on(struct at91_udc *udc)
 	if (udc->clocked)
 		return;
 	udc->clocked = 1;
-	clk_enable(udc->iclk);
-	clk_enable(udc->fclk);
+	clk_prepare_enable(udc->iclk);
+	clk_prepare_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)
@@ -880,8 +880,8 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable(udc->fclk);
-	clk_disable(udc->iclk);
+	clk_disable_unprepare(udc->fclk);
+	clk_disable_unprepare(udc->iclk);
 }
 
 /*
@@ -1725,7 +1725,7 @@ static int at91udc_probe(struct platform_device *pdev)
 	/* init software state */
 	udc = &controller;
 	udc->gadget.dev.parent = dev;
-	if (pdev->dev.of_node)
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
 		at91udc_of_init(udc, pdev->dev.of_node);
 	else
 		memcpy(&udc->board, dev->platform_data,
@@ -1782,12 +1782,14 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
-	clk_enable(udc->iclk);
+	retval = clk_prepare_enable(udc->iclk);
+	if (retval)
+		goto fail1;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable(udc->iclk);
+	clk_disable_unprepare(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 5d3561ea1c15..edab45da3741 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -959,8 +959,11 @@ static struct usb_function_instance *ecm_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = ecm_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type);
 
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 90ee8022e8d8..d00392d879db 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -593,8 +593,11 @@ static struct usb_function_instance *eem_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = eem_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type);
 
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 952177f7eb9b..1c28fe13328a 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -1350,8 +1350,11 @@ static struct usb_function_instance *ncm_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = ncm_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
 
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 7944fb0efe3b..1bf26e9f38cd 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -656,8 +656,11 @@ static struct usb_function_instance *phonet_alloc_inst(void)
 
 	opts->func_inst.free_func_inst = phonet_free_inst;
 	opts->net = gphonet_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_PTR(PTR_ERR(opts->net));
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 			&phonet_func_type);
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 191df35ae69d..717ed7f95639 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -963,8 +963,11 @@ static struct usb_function_instance *rndis_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = rndis_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 				    &rndis_func_type);
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 5601e1d96c4f..7c8674fa7e80 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -505,8 +505,11 @@ static struct usb_function_instance *geth_alloc_inst(void)
 	mutex_init(&opts->lock);
 	opts->func_inst.free_func_inst = geth_free_inst;
 	opts->net = gether_setup_default();
-	if (IS_ERR(opts->net))
-		return ERR_CAST(opts->net);
+	if (IS_ERR(opts->net)) {
+		struct net_device *net = opts->net;
+		kfree(opts);
+		return ERR_CAST(net);
+	}
 
 	config_group_init_type_name(&opts->func_inst.group, "",
 				    &gether_func_type);
diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c
index cce5535b1dc6..10cd18ddd0d4 100644
--- a/drivers/usb/gadget/fotg210-udc.c
+++ b/drivers/usb/gadget/fotg210-udc.c
@@ -1074,7 +1074,7 @@ static struct usb_gadget_ops fotg210_gadget_ops = {
 	.udc_stop		= fotg210_udc_stop,
 };
 
-static int __exit fotg210_udc_remove(struct platform_device *pdev)
+static int fotg210_udc_remove(struct platform_device *pdev)
 {
 	struct fotg210_udc *fotg210 = dev_get_drvdata(&pdev->dev);
 
@@ -1088,7 +1088,7 @@ static int __exit fotg210_udc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init fotg210_udc_probe(struct platform_device *pdev)
+static int fotg210_udc_probe(struct platform_device *pdev)
 {
 	struct resource *res, *ires;
 	struct fotg210_udc *fotg210 = NULL;
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 07fdb3eaf48a..ec6a2d290398 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -1776,7 +1776,7 @@ static int mv_u3d_remove(struct platform_device *dev)
 	kfree(u3d->eps);
 
 	if (u3d->irq)
-		free_irq(u3d->irq, &dev->dev);
+		free_irq(u3d->irq, u3d);
 
 	if (u3d->cap_regs)
 		iounmap(u3d->cap_regs);
@@ -1974,7 +1974,7 @@ static int mv_u3d_probe(struct platform_device *dev)
 	return 0;
 
 err_unregister:
-	free_irq(u3d->irq, &dev->dev);
+	free_irq(u3d->irq, u3d);
 err_request_irq:
 err_get_irq:
 	kfree(u3d->status_req);
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index ffd8fa541101..c28ac9872030 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -50,6 +50,8 @@ static DEFINE_MUTEX(udc_lock);
 
 /* ------------------------------------------------------------------------- */
 
+#ifdef	CONFIG_HAS_DMA
+
 int usb_gadget_map_request(struct usb_gadget *gadget,
 		struct usb_request *req, int is_in)
 {
@@ -99,6 +101,8 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget,
 }
 EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
 
+#endif	/* CONFIG_HAS_DMA */
+
 /* ------------------------------------------------------------------------- */
 
 void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -194,9 +198,11 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 	dev_set_name(&gadget->dev, "gadget");
 	gadget->dev.parent = parent;
 
+#ifdef	CONFIG_HAS_DMA
 	dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask);
 	gadget->dev.dma_parms = parent->dma_parms;
 	gadget->dev.dma_mask = parent->dma_mask;
+#endif
 
 	if (release)
 		gadget->dev.release = release;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2b702772d04d..6dce37555c4f 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -874,6 +874,7 @@ static int ehci_hub_control (
 				ehci->reset_done[wIndex] = jiffies
 						+ msecs_to_jiffies(20);
 				usb_hcd_start_port_resume(&hcd->self, wIndex);
+				set_bit(wIndex, &ehci->resuming_ports);
 				/* check the port again */
 				mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 						ehci->reset_done[wIndex]);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 4b8a2092432f..978c849f9c9a 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -13,6 +13,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
 #else
+struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cc24e39b97d5..f00cb203faea 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -93,7 +93,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
-		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e57eafa6910..5b08cd85f8e7 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -434,7 +434,7 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
 
 	/* A ring has pending URBs if its TD list is not empty */
 	if (!(ep->ep_state & EP_HAS_STREAMS)) {
-		if (!(list_empty(&ep->ring->td_list)))
+		if (ep->ring && !(list_empty(&ep->ring->td_list)))
 			xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
 		return;
 	}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2c49f00260ca..41eb4fc33453 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -329,7 +329,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 	return;
 }
 
-static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci)
 {
 	int i;
 
@@ -1181,9 +1181,6 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 	}
 
 	xhci = hcd_to_xhci(hcd);
-	if (xhci->xhc_state & XHCI_STATE_HALTED)
-		return -ENODEV;
-
 	if (check_virt_dev) {
 		if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
 			printk(KERN_DEBUG "xHCI %s called with unaddressed "
@@ -1199,6 +1196,9 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 		}
 	}
 
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
+		return -ENODEV;
+
 	return 1;
 }
 
@@ -3898,7 +3898,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
  * Issue an Evaluate Context command to change the Maximum Exit Latency in the
  * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
  */
-static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 			struct usb_device *udev, u16 max_exit_latency)
 {
 	struct xhci_virt_device *virt_dev;
@@ -4892,6 +4892,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 
 	get_quirks(dev, xhci);
 
+	/* In xhci controllers which follow xhci 1.0 spec gives a spurious
+	 * success event after a short transfer. This quirk will ignore such
+	 * spurious event.
+	 */
+	if (xhci->hci_version > 0x96)
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index c21386ec5d35..de98906f786d 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3247,6 +3247,7 @@ static const struct usb_device_id sisusb_table[] = {
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x0711, 0x0920) },
+	{ USB_DEVICE(0x0711, 0x0950) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index efe6e1464f45..a2fb30bbb971 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -71,9 +71,9 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
 	{1250, 5, 4, 20, 0},		/* 12 MHz */
 	{3125, 20, 4, 20, 0},		/* 16.8 MHz */
 	{1172, 8, 4, 20, 65537},	/* 19.2 MHz */
+	{1000, 7, 4, 10, 0},            /* 20 MHz */
 	{1250, 12, 4, 20, 0},		/* 26 MHz */
 	{3125, 47, 4, 20, 92843},	/* 38.4 MHz */
-	{1000, 7, 4, 10, 0},            /* 20 MHz */
 
 };
 
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 1011c16ade7e..758b86d0fcb3 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -388,7 +388,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
 		clk = devm_clk_get(dev, "otg");
 
 	if (IS_ERR(clk)) {
-		dev_err(dev, "Failed to get otg clock\n");
+		dev_err(dev, "Failed to get usbhost/otg clock\n");
 		return PTR_ERR(clk);
 	}
 
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index ed4949faa70d..805940c37353 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -855,10 +855,6 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget,
 	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
-	if (!driver		||
-	    !driver->unbind)
-		return -EINVAL;
-
 	usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
 	gpriv->driver = NULL;
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index d6ef2f8da37d..0eae4ba3760e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
@@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 0a818b238508..603fb70dde80 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -905,20 +905,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* End of block to be checked */
 
@@ -927,7 +927,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 									&Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x08;		/* Driver done bit */
 	Data |= 0x20;		/* rx_disable */
@@ -935,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* do register settings here */
 	/* Set all regs to the device default values. */
@@ -946,21 +946,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "disabling interrupts failed\n");
-		return -1;
+		goto err;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0x03;
@@ -1103,6 +1103,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* mos7840_change_port_settings(mos7840_port,old_termios); */
 
 	return 0;
+err:
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = mos7840_port->write_urb_pool[j];
+		if (!urb)
+			continue;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+	return status;
 }
 
 /*****************************************************************************
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dd857de05b0..1cf6f125f5f0 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb);
 #define OLIVETTI_VENDOR_ID			0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
 #define OLIVETTI_PRODUCT_OLICARD145		0xc003
+#define OLIVETTI_PRODUCT_OLICARD200		0xc005
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f
 #define CELOT_PRODUCT_CT680M			0x6801
 
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID       0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP         0x000b
-
 /* Samsung products */
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
@@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb);
 
 /* Hyundai Petatel Inc. products */
 #define PETATEL_VENDOR_ID			0x1ff4
-#define PETATEL_PRODUCT_NP10T			0x600e
+#define PETATEL_PRODUCT_NP10T_600A		0x600a
+#define PETATEL_PRODUCT_NP10T_600E		0x600e
 
 /* TP-LINK Incorporated products */
 #define TPLINK_VENDOR_ID			0x2357
@@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
@@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = {
 
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
@@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
-	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },	/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },	/* D-Link DWM-156 (variant) */
@@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 7182bb774b79..375b5a400b6f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -371,7 +371,7 @@ static int ti_startup(struct usb_serial *serial)
 	usb_set_serial_data(serial, tdev);
 
 	/* determine device type */
-	if (usb_match_id(serial->interface, ti_id_table_3410))
+	if (serial->type == &ti_1port_device)
 		tdev->td_is_3410 = 1;
 	dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
 		tdev->td_is_3410 ? "3410" : "5052");
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1799335288bd..c015f2c16729 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -665,6 +665,13 @@ UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */
+UNUSUAL_DEV(  0x054c, 0x02a5, 0x0100, 0x0100,
+		"Sony Corp.",
+		"MicroVault Flash Drive",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_CAPACITY_16 ),
+
 /* floppy reports multiple luns */
 UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
 		"SAMSUNG",