Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Git got absolutely destroyed with all our cherry-picking from
drm-intel-next-queued to various branches. It ended up inserting
intel_crtc_page_flip 2x even in intel_display.c.

Backmerge to get back to sanity.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

42 files changed, 852 insertions, 456 deletions

diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 171fa7d793bc..1d8b03c81030 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -829,8 +829,10 @@ static int alauda_write_lba(struct us_data *us, u16 lba,
 
 	pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
 	if (pba == 1) {
-		/* Maybe it is impossible to write to PBA 1.
-		   Fake success, but don't do anything. */
+		/*
+		 * Maybe it is impossible to write to PBA 1.
+		 * Fake success, but don't do anything.
+		 */
 		printk(KERN_WARNING
 		       "alauda_write_lba: avoid writing to pba 1\n");
 		return USB_STOR_TRANSPORT_GOOD;
@@ -977,10 +979,12 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
 			usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
 				     pages, lba, page);
 
-			/* This is not really an error. It just means
-			   that the block has never been written.
-			   Instead of returning USB_STOR_TRANSPORT_ERROR
-			   it is better to return all zero data. */
+			/*
+			 * This is not really an error. It just means
+			 * that the block has never been written.
+			 * Instead of returning USB_STOR_TRANSPORT_ERROR
+			 * it is better to return all zero data.
+			 */
 
 			memset(buffer, 0, len);
 		} else {
@@ -1222,8 +1226,10 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 	}
 
 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
-		/* sure.  whatever.  not like we can stop the user from popping
-		   the media out of the device (no locking doors, etc) */
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index c80d3dec9a34..5e4af44d7d9f 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -110,13 +110,17 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 	/* first build the ATACB command */
 	srb->cmd_len = 16;
 
-	srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command
-	                        this value can change, but most(all ?) manufacturers
-							keep the cypress default : 0x24 */
+	srb->cmnd[0] = 0x24; /*
+			      * bVSCBSignature : vendor-specific command
+			      * this value can change, but most(all ?) manufacturers
+			      * keep the cypress default : 0x24
+			      */
 	srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
 
-	srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med
-								lba high, device, command are valid */
+	srb->cmnd[3] = 0xff - 1; /*
+				  * features, sector count, lba low, lba med
+				  * lba high, device, command are valid
+				  */
 	srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
 
 	if (save_cmnd[0] == ATA_16) {
@@ -155,8 +159,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 	usb_stor_transparent_scsi_command(srb, us);
 
-	/* if the device doesn't support ATACB
-	 */
+	/* if the device doesn't support ATACB */
 	if (srb->result == SAM_STAT_CHECK_CONDITION &&
 			memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
 				sizeof(usb_stor_sense_invalidCDB)) == 0) {
@@ -164,7 +167,8 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		goto end;
 	}
 
-	/* if ck_cond flags is set, and there wasn't critical error,
+	/*
+	 * if ck_cond flags is set, and there wasn't critical error,
 	 * build the special sense
 	 */
 	if ((srb->result != (DID_ERROR << 16) &&
@@ -176,11 +180,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		unsigned char *desc = sb + 8;
 		int tmp_result;
 
-		/* build the command for
-		 * reading the ATA registers */
+		/* build the command for reading the ATA registers */
 		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
 
-		/* we use the same command as before, but we set
+		/*
+		 * we use the same command as before, but we set
 		 * the read taskfile bit, for not executing atacb command,
 		 * but reading register selected in srb->cmnd[4]
 		 */
@@ -204,10 +208,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
 		sb[3] = 0x1D;
 
-		/* XXX we should generate sk, asc, ascq from status and error
+		/*
+		 * XXX we should generate sk, asc, ascq from status and error
 		 * regs
 		 * (see 11.1 Error translation ATA device error to SCSI error
-		 *  map, and ata_to_sense_error from libata.)
+		 * map, and ata_to_sense_error from libata.)
 		 */
 
 		/* Sense data is current and format is descriptor. */
@@ -258,7 +263,8 @@ static int cypress_probe(struct usb_interface *intf,
 	if (result)
 		return result;
 
-	/* Among CY7C68300 chips, the A revision does not support Cypress ATACB
+	/*
+	 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
 	 * Filter out this revision from EEPROM default descriptor values
 	 */
 	device = interface_to_usbdev(intf);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index aa4f51944a4a..723197af6ec5 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -1,4 +1,5 @@
-/* Driver for Datafab USB Compact Flash reader
+/*
+ * Driver for Datafab USB Compact Flash reader
  *
  * datafab driver v0.1:
  *
@@ -693,18 +694,23 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
 	}
 
 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
-		// sure.  whatever.  not like we can stop the user from
-		// popping the media out of the device (no locking doors, etc)
-		//
+		/*
+		 * sure.  whatever.  not like we can stop the user from
+		 * popping the media out of the device (no locking doors, etc)
+		 */
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
 	if (srb->cmnd[0] == START_STOP) {
-		/* this is used by sd.c'check_scsidisk_media_change to detect
-		   media change */
+		/*
+		 * this is used by sd.c'check_scsidisk_media_change to detect
+		 * media change
+		 */
 		usb_stor_dbg(us, "START_STOP\n");
-		/* the first datafab_id_device after a media change returns
-		   an error (determined experimentally) */
+		/*
+		 * the first datafab_id_device after a media change returns
+		 * an error (determined experimentally)
+		 */
 		rc = datafab_id_device(us, info);
 		if (rc == USB_STOR_TRANSPORT_GOOD) {
 			info->sense_key = NO_SENSE;
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
index 5a12c03138f8..8d20804a59e6 100644
--- a/drivers/usb/storage/debug.c
+++ b/drivers/usb/storage/debug.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Debugging Functions Source Code File
  *
  * Current development and maintenance by:
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
index 6b365ce4e610..8ab73299b650 100644
--- a/drivers/usb/storage/debug.h
+++ b/drivers/usb/storage/debug.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Debugging Functions Header File
  *
  * Current development and maintenance by:
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index d3a17c65a702..02bdaa912164 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -560,8 +560,10 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
 	/* check bulk status */
 	residue = le32_to_cpu(bcs->Residue);
 
-	/* try to compute the actual residue, based on how much data
-	 * was really transferred and what the device tells us */
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
 	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
 		residue = min(residue, transfer_length);
 		if (us->srb != NULL)
@@ -862,9 +864,6 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
 	u8 ExtBuf[4];
 	u32 bn = PhyBlockAddr * 0x20 + PageNum;
 
-	/* printk(KERN_INFO "MS --- MS_ReaderReadPage,
-	PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
-
 	result = ene_load_bincode(us, MS_RW_PATTERN);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
@@ -1141,8 +1140,6 @@ static int ms_read_copyblock(struct us_data *us, u16 oldphy, u16 newphy,
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
 
-	/* printk(KERN_INFO "MS_ReaderCopyBlock --- PhyBlockAddr = %x,
-		PageNum = %x\n", PhyBlockAddr, PageNum); */
 	result = ene_load_bincode(us, MS_RW_PATTERN);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
@@ -1176,8 +1173,6 @@ static int ms_read_eraseblock(struct us_data *us, u32 PhyBlockAddr)
 	int result;
 	u32 bn = PhyBlockAddr;
 
-	/* printk(KERN_INFO "MS --- ms_read_eraseblock,
-			PhyBlockAddr = %x\n", PhyBlockAddr); */
 	result = ene_load_bincode(us, MS_RW_PATTERN);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
@@ -1255,8 +1250,6 @@ static int ms_lib_overwrite_extra(struct us_data *us, u32 PhyBlockAddr,
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
 
-	/* printk("MS --- MS_LibOverwriteExtra,
-		PhyBlockAddr = %x, PageNum = %x\n", PhyBlockAddr, PageNum); */
 	result = ene_load_bincode(us, MS_RW_PATTERN);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
@@ -1342,7 +1335,6 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
 	int result;
 	u8 ExtBuf[4];
 
-	/* printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum); */
 	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
@@ -1541,9 +1533,6 @@ static int ms_lib_read_extrablock(struct us_data *us, u32 PhyBlock,
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int     result;
 
-	/* printk("MS_LibReadExtraBlock --- PhyBlock = %x,
-		PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen); */
-
 	/* Read Extra Data */
 	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -2390,8 +2379,10 @@ static int ene_ub6250_reset_resume(struct usb_interface *iface)
 	/* Report the reset to the SCSI core */
 	usb_stor_reset_resume(iface);
 
-	/* FIXME: Notify the subdrivers that they need to reinitialize
-	 * the device */
+	/*
+	 * FIXME: Notify the subdrivers that they need to reinitialize
+	 * the device
+	 */
 	info->Power_IsResum = true;
 	/*info->SD_Status.Ready = 0; */
 	info->SD_Status = *(struct SD_STATUS *)&tmp;
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 3f2b08966b9d..c0a5d954414b 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -1,4 +1,5 @@
-/* Driver for Freecom USB/IDE adaptor
+/*
+ * Driver for Freecom USB/IDE adaptor
  *
  * Freecom v0.1:
  *
@@ -84,25 +85,33 @@ struct freecom_status {
 	u8    Pad[60];
 };
 
-/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
- * register. */
+/*
+ * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
+ * register.
+ */
 #define FCM_INT_STATUS		0x02 /* INDEX_STAT */
 #define FCM_STATUS_BUSY		0x80
 
-/* These are the packet types.  The low bit indicates that this command
- * should wait for an interrupt. */
+/*
+ * These are the packet types.  The low bit indicates that this command
+ * should wait for an interrupt.
+ */
 #define FCM_PACKET_ATAPI	0x21
 #define FCM_PACKET_STATUS	0x20
 
-/* Receive data from the IDE interface.  The ATAPI packet has already
- * waited, so the data should be immediately available. */
+/*
+ * Receive data from the IDE interface.  The ATAPI packet has already
+ * waited, so the data should be immediately available.
+ */
 #define FCM_PACKET_INPUT	0x81
 
 /* Send data to the IDE interface. */
 #define FCM_PACKET_OUTPUT	0x01
 
-/* Write a value to an ide register.  Or the ide register to write after
- * munging the address a bit. */
+/*
+ * Write a value to an ide register.  Or the ide register to write after
+ * munging the address a bit.
+ */
 #define FCM_PACKET_IDE_WRITE	0x40
 #define FCM_PACKET_IDE_READ	0xC0
 
@@ -251,16 +260,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 	result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
 			FCM_PACKET_LENGTH, NULL);
 
-	/* The Freecom device will only fail if there is something wrong in
+	/*
+	 * The Freecom device will only fail if there is something wrong in
 	 * USB land.  It returns the status in its own registers, which
-	 * come back in the bulk pipe. */
+	 * come back in the bulk pipe.
+	 */
 	if (result != USB_STOR_XFER_GOOD) {
 		usb_stor_dbg(us, "freecom transport error\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	/* There are times we can optimize out this status read, but it
-	 * doesn't hurt us to always do it now. */
+	/*
+	 * There are times we can optimize out this status read, but it
+	 * doesn't hurt us to always do it now.
+	 */
 	result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
 			FCM_STATUS_PACKET_LENGTH, &partial);
 	usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
@@ -269,7 +282,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	US_DEBUG(pdump(us, (void *)fst, partial));
 
-	/* The firmware will time-out commands after 20 seconds. Some commands
+	/*
+	 * The firmware will time-out commands after 20 seconds. Some commands
 	 * can legitimately take longer than this, so we use a different
 	 * command that only waits for the interrupt and then sends status,
 	 * without having to send a new ATAPI command to the device.
@@ -291,7 +305,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 		result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
 				FCM_PACKET_LENGTH, NULL);
 
-		/* The Freecom device will only fail if there is something
+		/*
+		 * The Freecom device will only fail if there is something
 		 * wrong in USB land.  It returns the status in its own
 		 * registers, which come back in the bulk pipe.
 		 */
@@ -318,9 +333,11 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_FAILED;
 	}
 
-	/* The device might not have as much data available as we
+	/*
+	 * The device might not have as much data available as we
 	 * requested.  If you ask for more than the device has, this reads
-	 * and such will hang. */
+	 * and such will hang.
+	 */
 	usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
 		     le16_to_cpu(fst->Count));
 	usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
@@ -344,16 +361,20 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 			     length);
 	}
 
-	/* What we do now depends on what direction the data is supposed to
-	 * move in. */
+	/*
+	 * What we do now depends on what direction the data is supposed to
+	 * move in.
+	 */
 
 	switch (us->srb->sc_data_direction) {
 	case DMA_FROM_DEVICE:
 		/* catch bogus "read 0 length" case */
 		if (!length)
 			break;
-		/* Make sure that the status indicates that the device
-		 * wants data as well. */
+		/*
+		 * Make sure that the status indicates that the device
+		 * wants data as well.
+		 */
 		if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
 			usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
 			return USB_STOR_TRANSPORT_FAILED;
@@ -384,8 +405,10 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* catch bogus "write 0 length" case */
 		if (!length)
 			break;
-		/* Make sure the status indicates that the device wants to
-		 * send us data. */
+		/*
+		 * Make sure the status indicates that the device wants to
+		 * send us data.
+		 */
 		/* !!IMPLEMENT!! */
 		result = freecom_writedata (srb, us, ipipe, opipe, length);
 		if (result != USB_STOR_TRANSPORT_GOOD)
@@ -431,7 +454,8 @@ static int init_freecom(struct us_data *us)
 	int result;
 	char *buffer = us->iobuf;
 
-	/* The DMA-mapped I/O buffer is 64 bytes long, just right for
+	/*
+	 * The DMA-mapped I/O buffer is 64 bytes long, just right for
 	 * all our packets.  No need to allocate any extra buffer space.
 	 */
 
@@ -440,7 +464,8 @@ static int init_freecom(struct us_data *us)
 	buffer[32] = '\0';
 	usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
 
-	/* Special thanks to the people at Freecom for providing me with
+	/*
+	 * Special thanks to the people at Freecom for providing me with
 	 * this "magic sequence", which they use in their Windows and MacOS
 	 * drivers to make sure that all the attached perhiperals are
 	 * properly reset.
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 31fa2e92065b..d9d8c17e05d1 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -1,4 +1,5 @@
-/* Special Initializers for certain USB Mass Storage devices
+/*
+ * Special Initializers for certain USB Mass Storage devices
  *
  * Current development and maintenance by:
  *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -42,8 +43,10 @@
 #include "debug.h"
 #include "transport.h"
 
-/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
- * mode */
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
 int usb_stor_euscsi_init(struct us_data *us)
 {
 	int result;
@@ -57,8 +60,10 @@ int usb_stor_euscsi_init(struct us_data *us)
 	return 0;
 }
 
-/* This function is required to activate all four slots on the UCR-61S2B
- * flash reader */
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
 int usb_stor_ucr61s2b_init(struct us_data *us)
 {
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 529327fbb06b..039abf4d1cb7 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -1,4 +1,5 @@
-/* Header file for Special Initializers for certain USB Mass Storage devices
+/*
+ * Header file for Special Initializers for certain USB Mass Storage devices
  *
  * Current development and maintenance by:
  *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -38,12 +39,16 @@
 #include "usb.h"
 #include "transport.h"
 
-/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
- * mode */
+/*
+ * This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode
+ */
 int usb_stor_euscsi_init(struct us_data *us);
 
-/* This function is required to activate all four slots on the UCR-61S2B
- * flash reader */
+/*
+ * This function is required to activate all four slots on the UCR-61S2B
+ * flash reader
+ */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
 /* This places the HUAWEI E220 devices in multi-port mode */
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 39afd7045c43..fba4005dd737 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1,4 +1,5 @@
-/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+/*
+ * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
  *
  * Current development and maintenance:
  *   (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
@@ -628,7 +629,8 @@ static void isd200_invoke_transport( struct us_data *us,
 	srb->cmd_len = sizeof(ataCdb->generic);
 	transferStatus = usb_stor_Bulk_transport(srb, us);
 
-	/* if the command gets aborted by the higher layers, we need to
+	/*
+	 * if the command gets aborted by the higher layers, we need to
 	 * short-circuit all other processing
 	 */
 	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -695,15 +697,18 @@ static void isd200_invoke_transport( struct us_data *us,
 		}
 	}
 
-	/* Regardless of auto-sense, if we _know_ we have an error
+	/*
+	 * Regardless of auto-sense, if we _know_ we have an error
 	 * condition, show that in the result code
 	 */
 	if (transferStatus == USB_STOR_TRANSPORT_FAILED)
 		srb->result = SAM_STAT_CHECK_CONDITION;
 	return;
 
-	/* abort processing: the bulk-only transport requires a reset
-	 * following an abort */
+	/*
+	 * abort processing: the bulk-only transport requires a reset
+	 * following an abort
+	 */
 	Handle_Abort:
 	srb->result = DID_ABORT << 16;
 
@@ -965,20 +970,22 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
 			info->DeviceHead = master_slave;
 			break;
 		} 
-		/* check Cylinder High/Low to
-		   determine if it is an ATAPI device
-		*/
+		/*
+		 * check Cylinder High/Low to
+		 * determine if it is an ATAPI device
+		 */
 		else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
 			 regs[ATA_REG_LCYL_OFFSET] == 0x14) {
-			/* It seems that the RICOH 
-			   MP6200A CD/RW drive will 
-			   report itself okay as a
-			   slave when it is really a
-			   master. So this check again
-			   as a master device just to
-			   make sure it doesn't report
-			   itself okay as a master also
-			*/
+			/*
+			 * It seems that the RICOH
+			 * MP6200A CD/RW drive will
+			 * report itself okay as a
+			 * slave when it is really a
+			 * master. So this check again
+			 * as a master device just to
+			 * make sure it doesn't report
+			 * itself okay as a master also
+			 */
 			if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
 			    !recheckAsMaster) {
 				usb_stor_dbg(us, "   Identified ATAPI device as slave.  Rechecking again as master\n");
@@ -1176,9 +1183,11 @@ static int isd200_get_inquiry_data( struct us_data *us )
 				if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
 					usb_stor_dbg(us, "   Device supports Media Status Notification\n");
 
-					/* Indicate that it is enabled, even though it is not
-					 * This allows the lock/unlock of the media to work
-					 * correctly.
+					/*
+					 * Indicate that it is enabled, even
+					 * though it is not.
+					 * This allows the lock/unlock of the
+					 * media to work correctly.
 					 */
 					info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
 				}
@@ -1197,7 +1206,7 @@ static int isd200_get_inquiry_data( struct us_data *us )
 			usb_stor_dbg(us, "Protocol changed to: %s\n",
 				     us->protocol_name);
 	    
-			/* Free driver structure */	    
+			/* Free driver structure */
 			us->extra_destructor(info);
 			kfree(info);
 			us->extra = NULL;
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index ee613e258db0..011e5270690a 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -1,4 +1,5 @@
-/* Driver for Lexar "Jumpshot" Compact Flash reader
+/*
+ * Driver for Lexar "Jumpshot" Compact Flash reader
  *
  * jumpshot driver v0.1:
  *
@@ -618,18 +619,23 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
 	}
 
 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
-		// sure.  whatever.  not like we can stop the user from popping
-		// the media out of the device (no locking doors, etc)
-		//
+		/*
+		 * sure.  whatever.  not like we can stop the user from popping
+		 * the media out of the device (no locking doors, etc)
+		 */
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
 	if (srb->cmnd[0] == START_STOP) {
-		/* this is used by sd.c'check_scsidisk_media_change to detect
-		   media change */
+		/*
+		 * this is used by sd.c'check_scsidisk_media_change to detect
+		 * media change
+		 */
 		usb_stor_dbg(us, "START_STOP\n");
-		/* the first jumpshot_id_device after a media change returns
-		   an error (determined experimentally) */
+		/*
+		 * the first jumpshot_id_device after a media change returns
+		 * an error (determined experimentally)
+		 */
 		rc = jumpshot_id_device(us, info);
 		if (rc == USB_STOR_TRANSPORT_GOOD) {
 			info->sense_key = NO_SENSE;
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index ae201e69475c..f9d407f0b508 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -1,4 +1,5 @@
-/* Driver for Rio Karma
+/*
+ * Driver for Rio Karma
  *
  *   (c) 2006 Bob Copeland <me@bobcopeland.com>
  *   (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index b2b35b1d7de8..57282f12317b 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -65,7 +65,8 @@ static int option_rezero(struct us_data *us)
 		goto out;
 	}
 
-	/* Some of the devices need to be asked for a response, but we don't
+	/*
+	 * Some of the devices need to be asked for a response, but we don't
 	 * care what that response is.
 	 */
 	usb_stor_bulk_transfer_buf(us,
@@ -140,7 +141,8 @@ int option_ms_init(struct us_data *us)
 
 	usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called");
 
-	/* Additional test for vendor information via INQUIRY,
+	/*
+	 * Additional test for vendor information via INQUIRY,
 	 * because some vendor/product IDs are ambiguous
 	 */
 	result = option_inquiry(us);
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 12e3c2fac642..74c38870a17e 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  *
  * Current development and maintenance by:
  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -75,7 +76,8 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 
 void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* fix some commands -- this is a form of mode translation
+	/*
+	 * fix some commands -- this is a form of mode translation
 	 * UFI devices only accept 12 byte long commands
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
@@ -127,7 +129,8 @@ EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
  * Scatter-gather transfer buffer access routines
  ***********************************************************************/
 
-/* Copy a buffer of length buflen to/from the srb's transfer buffer.
+/*
+ * Copy a buffer of length buflen to/from the srb's transfer buffer.
  * Update the **sgptr and *offset variables so that the next copy will
  * pick up from where this one left off.
  */
@@ -175,7 +178,8 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
 }
 EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
-/* Store the contents of buffer into srb's transfer buffer and set the
+/*
+ * Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
  */
 void usb_stor_set_xfer_buf(unsigned char *buffer,
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index ffc3e2af0156..a55666880b7b 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Protocol Functions Header File
  *
  * Current development and maintenance by:
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 20433563a601..4176d1af9bf2 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -1,4 +1,5 @@
-/* Driver for Realtek RTS51xx USB card reader
+/*
+ * Driver for Realtek RTS51xx USB card reader
  *
  * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
  *
@@ -267,8 +268,10 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 	if (bcs->Tag != us->tag)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	/* try to compute the actual residue, based on how much data
-	 * was really transferred and what the device tells us */
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
 	if (residue)
 		residue = residue < buf_len ? residue : buf_len;
 
@@ -286,7 +289,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 		return USB_STOR_TRANSPORT_FAILED;
 
 	case US_BULK_STAT_PHASE:
-		/* phase error -- note that a transport reset will be
+		/*
+		 * phase error -- note that a transport reset will be
 		 * invoked by the invoke_transport() function
 		 */
 		return USB_STOR_TRANSPORT_ERROR;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 90901861bfc0..33eb923df892 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * SCSI layer glue code
  *
  * Current development and maintenance by:
@@ -58,7 +59,8 @@
 #include "transport.h"
 #include "protocol.h"
 
-/* Vendor IDs for companies that seem to include the READ CAPACITY bug
+/*
+ * Vendor IDs for companies that seem to include the READ CAPACITY bug
  * in all their devices
  */
 #define VENDOR_ID_NOKIA		0x0421
@@ -87,7 +89,8 @@ static int slave_alloc (struct scsi_device *sdev)
 	 */
 	sdev->inquiry_len = 36;
 
-	/* USB has unusual DMA-alignment requirements: Although the
+	/*
+	 * USB has unusual DMA-alignment requirements: Although the
 	 * starting address of each scatter-gather element doesn't matter,
 	 * the length of each element except the last must be divisible
 	 * by the Bulk maxpacket value.  There's currently no way to
@@ -115,7 +118,8 @@ static int slave_configure(struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
 
-	/* Many devices have trouble transferring more than 32KB at a time,
+	/*
+	 * Many devices have trouble transferring more than 32KB at a time,
 	 * while others have trouble with more than 64K. At this time we
 	 * are limiting both to 32K (64 sectores).
 	 */
@@ -128,14 +132,22 @@ static int slave_configure(struct scsi_device *sdev)
 			blk_queue_max_hw_sectors(sdev->request_queue,
 					      max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
-		/* Tapes need much higher max_sector limits, so just
+		/*
+		 * Tapes need much higher max_sector limits, so just
 		 * raise it to the maximum possible (4 GB / 512) and
 		 * let the queue segment size sort out the real limit.
 		 */
 		blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
+	} else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
+		/*
+		 * USB3 devices will be limited to 2048 sectors. This gives us
+		 * better throughput on most devices.
+		 */
+		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
 	}
 
-	/* Some USB host controllers can't do DMA; they have to use PIO.
+	/*
+	 * Some USB host controllers can't do DMA; they have to use PIO.
 	 * They indicate this by setting their dma_mask to NULL.  For
 	 * such controllers we need to make sure the block layer sets
 	 * up bounce buffers in addressable memory.
@@ -143,17 +155,21 @@ static int slave_configure(struct scsi_device *sdev)
 	if (!us->pusb_dev->bus->controller->dma_mask)
 		blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
 
-	/* We can't put these settings in slave_alloc() because that gets
+	/*
+	 * We can't put these settings in slave_alloc() because that gets
 	 * called before the device type is known.  Consequently these
-	 * settings can't be overridden via the scsi devinfo mechanism. */
+	 * settings can't be overridden via the scsi devinfo mechanism.
+	 */
 	if (sdev->type == TYPE_DISK) {
 
-		/* Some vendors seem to put the READ CAPACITY bug into
+		/*
+		 * Some vendors seem to put the READ CAPACITY bug into
 		 * all their devices -- primarily makers of cell phones
 		 * and digital cameras.  Since these devices always use
 		 * flash media and can be expected to have an even number
 		 * of sectors, we will always enable the CAPACITY_HEURISTICS
-		 * flag unless told otherwise. */
+		 * flag unless told otherwise.
+		 */
 		switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
 		case VENDOR_ID_NOKIA:
 		case VENDOR_ID_NIKON:
@@ -165,28 +181,36 @@ static int slave_configure(struct scsi_device *sdev)
 			break;
 		}
 
-		/* Disk-type devices use MODE SENSE(6) if the protocol
+		/*
+		 * Disk-type devices use MODE SENSE(6) if the protocol
 		 * (SubClass) is Transparent SCSI, otherwise they use
-		 * MODE SENSE(10). */
+		 * MODE SENSE(10).
+		 */
 		if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
 			sdev->use_10_for_ms = 1;
 
-		/* Many disks only accept MODE SENSE transfer lengths of
-		 * 192 bytes (that's what Windows uses). */
+		/*
+		 *Many disks only accept MODE SENSE transfer lengths of
+		 * 192 bytes (that's what Windows uses).
+		 */
 		sdev->use_192_bytes_for_3f = 1;
 
-		/* Some devices don't like MODE SENSE with page=0x3f,
+		/*
+		 * Some devices don't like MODE SENSE with page=0x3f,
 		 * which is the command used for checking if a device
 		 * is write-protected.  Now that we tell the sd driver
 		 * to do a 192-byte transfer with this command the
 		 * majority of devices work fine, but a few still can't
 		 * handle it.  The sd driver will simply assume those
-		 * devices are write-enabled. */
+		 * devices are write-enabled.
+		 */
 		if (us->fflags & US_FL_NO_WP_DETECT)
 			sdev->skip_ms_page_3f = 1;
 
-		/* A number of devices have problems with MODE SENSE for
-		 * page x08, so we will skip it. */
+		/*
+		 * A number of devices have problems with MODE SENSE for
+		 * page x08, so we will skip it.
+		 */
 		sdev->skip_ms_page_8 = 1;
 
 		/* Some devices don't handle VPD pages correctly */
@@ -198,15 +222,19 @@ static int slave_configure(struct scsi_device *sdev)
 		/* Do not attempt to use WRITE SAME */
 		sdev->no_write_same = 1;
 
-		/* Some disks return the total number of blocks in response
+		/*
+		 * Some disks return the total number of blocks in response
 		 * to READ CAPACITY rather than the highest block number.
-		 * If this device makes that mistake, tell the sd driver. */
+		 * If this device makes that mistake, tell the sd driver.
+		 */
 		if (us->fflags & US_FL_FIX_CAPACITY)
 			sdev->fix_capacity = 1;
 
-		/* A few disks have two indistinguishable version, one of
+		/*
+		 * A few disks have two indistinguishable version, one of
 		 * which reports the correct capacity and the other does not.
-		 * The sd driver has to guess which is the case. */
+		 * The sd driver has to guess which is the case.
+		 */
 		if (us->fflags & US_FL_CAPACITY_HEURISTICS)
 			sdev->guess_capacity = 1;
 
@@ -227,26 +255,34 @@ static int slave_configure(struct scsi_device *sdev)
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;
 
-		/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
+		/*
+		 * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
 		 * Hardware Error) when any low-level error occurs,
 		 * recoverable or not.  Setting this flag tells the SCSI
 		 * midlayer to retry such commands, which frequently will
 		 * succeed and fix the error.  The worst this can lead to
-		 * is an occasional series of retries that will all fail. */
+		 * is an occasional series of retries that will all fail.
+		 */
 		sdev->retry_hwerror = 1;
 
-		/* USB disks should allow restart.  Some drives spin down
-		 * automatically, requiring a START-STOP UNIT command. */
+		/*
+		 * USB disks should allow restart.  Some drives spin down
+		 * automatically, requiring a START-STOP UNIT command.
+		 */
 		sdev->allow_restart = 1;
 
-		/* Some USB cardreaders have trouble reading an sdcard's last
+		/*
+		 * Some USB cardreaders have trouble reading an sdcard's last
 		 * sector in a larger then 1 sector read, since the performance
-		 * impact is negligible we set this flag for all USB disks */
+		 * impact is negligible we set this flag for all USB disks
+		 */
 		sdev->last_sector_bug = 1;
 
-		/* Enable last-sector hacks for single-target devices using
+		/*
+		 * Enable last-sector hacks for single-target devices using
 		 * the Bulk-only transport, unless we already know the
-		 * capacity will be decremented or is correct. */
+		 * capacity will be decremented or is correct.
+		 */
 		if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
 					US_FL_SCM_MULT_TARG)) &&
 				us->protocol == USB_PR_BULK)
@@ -262,9 +298,11 @@ static int slave_configure(struct scsi_device *sdev)
 
 	} else {
 
-		/* Non-disk-type devices don't need to blacklist any pages
+		/*
+		 * Non-disk-type devices don't need to blacklist any pages
 		 * or to force 192-byte transfer lengths for MODE SENSE.
-		 * But they do need to use MODE SENSE(10). */
+		 * But they do need to use MODE SENSE(10).
+		 */
 		sdev->use_10_for_ms = 1;
 
 		/* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
@@ -272,7 +310,8 @@ static int slave_configure(struct scsi_device *sdev)
 			sdev->no_read_disc_info = 1;
 	}
 
-	/* The CB and CBI transports have no way to pass LUN values
+	/*
+	 * The CB and CBI transports have no way to pass LUN values
 	 * other than the bits in the second byte of a CDB.  But those
 	 * bits don't get set to the LUN value if the device reports
 	 * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
@@ -282,13 +321,17 @@ static int slave_configure(struct scsi_device *sdev)
 			sdev->scsi_level == SCSI_UNKNOWN)
 		us->max_lun = 0;
 
-	/* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
-	 * REMOVAL command, so suppress those commands. */
+	/*
+	 * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
+	 * REMOVAL command, so suppress those commands.
+	 */
 	if (us->fflags & US_FL_NOT_LOCKABLE)
 		sdev->lockable = 0;
 
-	/* this is to satisfy the compiler, tho I don't think the 
-	 * return code is ever checked anywhere. */
+	/*
+	 * this is to satisfy the compiler, tho I don't think the 
+	 * return code is ever checked anywhere.
+	 */
 	return 0;
 }
 
@@ -362,8 +405,10 @@ static int command_abort(struct scsi_cmnd *srb)
 
 	usb_stor_dbg(us, "%s called\n", __func__);
 
-	/* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
-	 * bits are protected by the host lock. */
+	/*
+	 * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
+	 * bits are protected by the host lock.
+	 */
 	scsi_lock(us_to_host(us));
 
 	/* Is this command still active? */
@@ -373,11 +418,13 @@ static int command_abort(struct scsi_cmnd *srb)
 		return FAILED;
 	}
 
-	/* Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
+	/*
+	 * Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
 	 * a device reset isn't already in progress (to avoid interfering
 	 * with the reset).  Note that we must retain the host lock while
 	 * calling usb_stor_stop_transport(); otherwise it might interfere
-	 * with an auto-reset that begins as soon as we release the lock. */
+	 * with an auto-reset that begins as soon as we release the lock.
+	 */
 	set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
 	if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
 		set_bit(US_FLIDX_ABORTING, &us->dflags);
@@ -390,8 +437,10 @@ static int command_abort(struct scsi_cmnd *srb)
 	return SUCCESS;
 }
 
-/* This invokes the transport reset mechanism to reset the state of the
- * device */
+/*
+ * This invokes the transport reset mechanism to reset the state of the
+ * device
+ */
 static int device_reset(struct scsi_cmnd *srb)
 {
 	struct us_data *us = host_to_us(srb->device->host);
@@ -419,9 +468,11 @@ static int bus_reset(struct scsi_cmnd *srb)
 	return result < 0 ? FAILED : SUCCESS;
 }
 
-/* Report a driver-initiated device reset to the SCSI layer.
+/*
+ * Report a driver-initiated device reset to the SCSI layer.
  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
- * The caller must own the SCSI host lock. */
+ * The caller must own the SCSI host lock.
+ */
 void usb_stor_report_device_reset(struct us_data *us)
 {
 	int i;
@@ -434,9 +485,11 @@ void usb_stor_report_device_reset(struct us_data *us)
 	}
 }
 
-/* Report a driver-initiated bus reset to the SCSI layer.
+/*
+ * Report a driver-initiated bus reset to the SCSI layer.
  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
- * The caller must not own the SCSI host lock. */
+ * The caller must not own the SCSI host lock.
+ */
 void usb_stor_report_bus_reset(struct us_data *us)
 {
 	struct Scsi_Host *host = us_to_host(us);
@@ -563,12 +616,30 @@ static const struct scsi_host_template usb_stor_host_template = {
 	.target_alloc =			target_alloc,
 
 	/* lots of sg segments can be handled */
-	.sg_tablesize =			SCSI_MAX_SG_CHAIN_SEGMENTS,
+	.sg_tablesize =			SG_MAX_SEGMENTS,
 
-	/* limit the total size of a transfer to 120 KB */
+
+	/*
+	 * Limit the total size of a transfer to 120 KB.
+	 *
+	 * Some devices are known to choke with anything larger. It seems like
+	 * the problem stems from the fact that original IDE controllers had
+	 * only an 8-bit register to hold the number of sectors in one transfer
+	 * and even those couldn't handle a full 256 sectors.
+	 *
+	 * Because we want to make sure we interoperate with as many devices as
+	 * possible, we will maintain a 240 sector transfer size limit for USB
+	 * Mass Storage devices.
+	 *
+	 * Tests show that other operating have similar limits with Microsoft
+	 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
+	 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
+	 * and 2048 for USB3 devices.
+	 */
 	.max_sectors =                  240,
 
-	/* merge commands... this seems to help performance, but
+	/*
+	 * merge commands... this seems to help performance, but
 	 * periodically someone should test to see which setting is more
 	 * optimal.
 	 */
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
index 5494d87607fb..d0a331dd9bc5 100644
--- a/drivers/usb/storage/scsiglue.h
+++ b/drivers/usb/storage/scsiglue.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * SCSI Connecting Glue Header File
  *
  * Current development and maintenance by:
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 79224fcf9b59..c5797fa2125e 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1,4 +1,5 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
+/*
+ * Driver for SanDisk SDDR-09 SmartMedia reader
  *
  *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
  *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
@@ -799,10 +800,12 @@ sddr09_read_data(struct us_data *us,
 			usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
 				     pages, lba, page);
 
-			/* This is not really an error. It just means
-			   that the block has never been written.
-			   Instead of returning an error
-			   it is better to return all zero data. */
+			/*
+			 * This is not really an error. It just means
+			 * that the block has never been written.
+			 * Instead of returning an error
+			 * it is better to return all zero data.
+			 */
 
 			memset(buffer, 0, len);
 
@@ -890,8 +893,10 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
 	}
 
 	if (pba == 1) {
-		/* Maybe it is impossible to write to PBA 1.
-		   Fake success, but don't do anything. */
+		/*
+		 * Maybe it is impossible to write to PBA 1.
+		 * Fake success, but don't do anything.
+		 */
 		printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
 		return 0;
 	}
@@ -979,18 +984,22 @@ sddr09_write_data(struct us_data *us,
 	struct scatterlist *sg;
 	int result;
 
-	// Figure out the initial LBA and page
+	/* Figure out the initial LBA and page */
 	lba = address >> info->blockshift;
 	page = (address & info->blockmask);
 	maxlba = info->capacity >> (info->pageshift + info->blockshift);
 	if (lba >= maxlba)
 		return -EIO;
 
-	// blockbuffer is used for reading in the old data, overwriting
-	// with the new data, and performing ECC calculations
+	/*
+	 * blockbuffer is used for reading in the old data, overwriting
+	 * with the new data, and performing ECC calculations
+	 */
 
-	/* TODO: instead of doing kmalloc/kfree for each write,
-	   add a bufferpointer to the info structure */
+	/*
+	 * TODO: instead of doing kmalloc/kfree for each write,
+	 * add a bufferpointer to the info structure
+	 */
 
 	pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
 	blocklen = (pagelen << info->blockshift);
@@ -1000,9 +1009,11 @@ sddr09_write_data(struct us_data *us,
 		return -ENOMEM;
 	}
 
-	// Since we don't write the user data directly to the device,
-	// we have to create a bounce buffer and move the data a piece
-	// at a time between the bounce buffer and the actual transfer buffer.
+	/*
+	 * Since we don't write the user data directly to the device,
+	 * we have to create a bounce buffer and move the data a piece
+	 * at a time between the bounce buffer and the actual transfer buffer.
+	 */
 
 	len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
 	buffer = kmalloc(len, GFP_NOIO);
@@ -1018,7 +1029,7 @@ sddr09_write_data(struct us_data *us,
 
 	while (sectors > 0) {
 
-		// Write as many sectors as possible in this block
+		/* Write as many sectors as possible in this block */
 
 		pages = min(sectors, info->blocksize - page);
 		len = (pages << info->pageshift);
@@ -1031,7 +1042,7 @@ sddr09_write_data(struct us_data *us,
 			break;
 		}
 
-		// Get the data from the transfer buffer
+		/* Get the data from the transfer buffer */
 		usb_stor_access_xfer_buf(buffer, len, us->srb,
 				&sg, &offset, FROM_XFER_BUF);
 
@@ -1168,9 +1179,11 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 	/* Byte 1 is the device type */
 	cardinfo = nand_find_id(deviceID[1]);
 	if (cardinfo) {
-		/* MB or MiB? It is neither. A 16 MB card has
-		   17301504 raw bytes, of which 16384000 are
-		   usable for user data. */
+		/*
+		 * MB or MiB? It is neither. A 16 MB card has
+		 * 17301504 raw bytes, of which 16384000 are
+		 * usable for user data.
+		 */
 		sprintf(blurbtxt + strlen(blurbtxt),
 			", %d MB", 1<<(cardinfo->chipshift - 20));
 	} else {
@@ -1211,14 +1224,18 @@ sddr09_read_map(struct us_data *us) {
 	if (!info->capacity)
 		return -1;
 
-	// size of a block is 1 << (blockshift + pageshift) bytes
-	// divide into the total capacity to get the number of blocks
+	/*
+	 * size of a block is 1 << (blockshift + pageshift) bytes
+	 * divide into the total capacity to get the number of blocks
+	 */
 
 	numblocks = info->capacity >> (info->blockshift + info->pageshift);
 
-	// read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
-	// but only use a 64 KB buffer
-	// buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+	/*
+	 * read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
+	 * but only use a 64 KB buffer
+	 * buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+	 */
 #define SDDR09_READ_MAP_BUFSZ 65536
 
 	alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
@@ -1575,8 +1592,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	havefakesense = 1;
 
-	/* Dummy up a response for INQUIRY since SDDR09 doesn't
-	   respond to INQUIRY commands */
+	/*
+	 * Dummy up a response for INQUIRY since SDDR09 doesn't
+	 * respond to INQUIRY commands
+	 */
 
 	if (srb->cmnd[0] == INQUIRY) {
 		memcpy(ptr, inquiry_response, 8);
@@ -1628,8 +1647,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 	if (srb->cmnd[0] == MODE_SENSE_10) {
 		int modepage = (srb->cmnd[2] & 0x3F);
 
-		/* They ask for the Read/Write error recovery page,
-		   or for all pages. */
+		/*
+		 * They ask for the Read/Write error recovery page,
+		 * or for all pages.
+		 */
 		/* %% We should check DBD %% */
 		if (modepage == 0x01 || modepage == 0x3F) {
 			usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
@@ -1682,7 +1703,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 				USB_STOR_TRANSPORT_ERROR);
 	}
 
-	/* catch-all for all other commands, except
+	/*
+	 * catch-all for all other commands, except
 	 * pass TEST_UNIT_READY and REQUEST_SENSE through
 	 */
 	if (srb->cmnd[0] != TEST_UNIT_READY &&
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index e5e0a25ecd96..147c50b3e00f 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -1,4 +1,5 @@
-/* Driver for SanDisk SDDR-55 SmartMedia reader
+/*
+ * Driver for SanDisk SDDR-55 SmartMedia reader
  *
  * SDDR55 driver v0.1:
  *
@@ -130,7 +131,8 @@ sddr55_bulk_transport(struct us_data *us, int direction,
 	return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL);
 }
 
-/* check if card inserted, if there is, update read_only status
+/*
+ * check if card inserted, if there is, update read_only status
  * return non zero if no card
  */
 
@@ -714,15 +716,18 @@ static int sddr55_read_map(struct us_data *us) {
 	if (max_lba > 1000)
 		max_lba = 1000;
 
-	// Each block is 64 bytes of control data, so block i is located in
-	// scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+	/*
+	 * Each block is 64 bytes of control data, so block i is located in
+	 * scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
+	 */
 
 	for (i=0; i<numblocks; i++) {
 		int zone = i / 1024;
 
 		lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]);
 
-			/* Every 1024 physical blocks ("zone"), the LBA numbers
+			/*
+			 * Every 1024 physical blocks ("zone"), the LBA numbers
 			 * go back to zero, but are within a higher
 			 * block of LBA's. Also, there is a maximum of
 			 * 1000 LBA's per zone. In other words, in PBA
@@ -733,7 +738,8 @@ static int sddr55_read_map(struct us_data *us) {
 			 * are 24 spare blocks to use when blocks do go bad.
 			 */
 
-			/* SDDR55 returns 0xffff for a bad block, and 0x400 for the 
+			/*
+			 * SDDR55 returns 0xffff for a bad block, and 0x400 for the 
 			 * CIS block. (Is this true for cards 8MB or less??)
 			 * Record these in the physical to logical map
 			 */ 
@@ -824,8 +830,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	memset (info->sense_data, 0, sizeof info->sense_data);
 
-	/* Dummy up a response for INQUIRY since SDDR55 doesn't
-	   respond to INQUIRY commands */
+	/*
+	 * Dummy up a response for INQUIRY since SDDR55 doesn't
+	 * respond to INQUIRY commands
+	 */
 
 	if (srb->cmnd[0] == INQUIRY) {
 		memcpy(ptr, inquiry_response, 8);
@@ -833,7 +841,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
-	/* only check card status if the map isn't allocated, ie no card seen yet
+	/*
+	 * only check card status if the map isn't allocated, ie no card seen yet
 	 * or if it's been over half a second since we last accessed it
 	 */
 	if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) {
@@ -849,8 +858,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 		}
 	}
 
-	/* if we detected a problem with the map when writing,
-	   don't allow any more access */
+	/*
+	 * if we detected a problem with the map when writing,
+	 * don't allow any more access
+	 */
 	if (info->fatal_error) {
 
 		set_sense_info (3, 0x31, 0);
@@ -868,12 +879,16 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 		info->capacity = capacity;
 
-		/* figure out the maximum logical block number, allowing for
-		 * the fact that only 250 out of every 256 are used */
+		/*
+		 * figure out the maximum logical block number, allowing for
+		 * the fact that only 250 out of every 256 are used
+		 */
 		info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250;
 
-		/* Last page in the card, adjust as we only use 250 out of
-		 * every 256 pages */
+		/*
+		 * Last page in the card, adjust as we only use 250 out of
+		 * every 256 pages
+		 */
 		capacity = (capacity / 256) * 250;
 
 		capacity /= PAGESIZE;
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index a3ec86b913a1..3b0294e4df93 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,5 @@
-/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+/*
+ * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
  *
  * Current development and maintenance by:
  *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
@@ -408,7 +409,8 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
 	int result;
 	unsigned char *status = us->iobuf;
 
-	/* Synchronizing cache on a CDR could take a heck of a long time,
+	/*
+	 * Synchronizing cache on a CDR could take a heck of a long time,
 	 * but probably not more than 10 minutes or so. On the other hand,
 	 * doing a full blank on a CDRW at speed 1 will take about 75
 	 * minutes!
@@ -1570,9 +1572,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	len = scsi_bufflen(srb);
 
-	/* Send A0 (ATA PACKET COMMAND).
-	   Note: I guess we're never going to get any of the ATA
-	   commands... just ATA Packet Commands.
+	/*
+	 * Send A0 (ATA PACKET COMMAND).
+	 * Note: I guess we're never going to get any of the ATA
+	 * commands... just ATA Packet Commands.
  	 */
 
 	registers[0] = USBAT_ATA_FEATURES;
@@ -1851,7 +1854,8 @@ static int usbat_probe(struct usb_interface *intf,
 	if (result)
 		return result;
 
-	/* The actual transport will be determined later by the
+	/*
+	 * The actual transport will be determined later by the
 	 * initialization routine; this is just a placeholder.
 	 */
 	us->transport_name = "Shuttle USBAT";
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 2ea657be14c8..9a51019ac7b2 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -177,7 +177,8 @@ int sierra_ms_init(struct us_data *us)
 
 		debug_swoc(&us->pusb_dev->dev, swocInfo);
 
-		/* If there is not Linux software on the TRU-Install device
+		/*
+		 * If there is not Linux software on the TRU-Install device
 		 * then switch to modem mode
 		 */
 		if (!containsFullLinuxPackage(swocInfo)) {
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 5e67f63b2e46..ffd086733421 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  *
  * Current development and maintenance by:
  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -109,7 +110,8 @@
  * called more than once or from being called during usb_submit_urb().
  */
 
-/* This is the completion handler which will wake us up when an URB
+/*
+ * This is the completion handler which will wake us up when an URB
  * completes.
  */
 static void usb_stor_blocking_completion(struct urb *urb)
@@ -119,7 +121,8 @@ static void usb_stor_blocking_completion(struct urb *urb)
 	complete(urb_done_ptr);
 }
 
-/* This is the common part of the URB message submission code
+/*
+ * This is the common part of the URB message submission code
  *
  * All URBs from the usb-storage driver involved in handling a queued scsi
  * command _must_ pass through this function (or something like it) for the
@@ -142,10 +145,12 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	us->current_urb->context = &urb_done;
 	us->current_urb->transfer_flags = 0;
 
-	/* we assume that if transfer_buffer isn't us->iobuf then it
+	/*
+	 * we assume that if transfer_buffer isn't us->iobuf then it
 	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's
 	 * easier than always having the caller tell us whether the
-	 * transfer buffer has already been mapped. */
+	 * transfer buffer has already been mapped.
+	 */
 	if (us->current_urb->transfer_buffer == us->iobuf)
 		us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	us->current_urb->transfer_dma = us->iobuf_dma;
@@ -157,8 +162,10 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 		return status;
 	}
 
-	/* since the URB has been submitted successfully, it's now okay
-	 * to cancel it */
+	/*
+	 * since the URB has been submitted successfully, it's now okay
+	 * to cancel it
+	 */
 	set_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
 
 	/* did an abort occur during the submission? */
@@ -220,7 +227,8 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 }
 EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
-/* This is a version of usb_clear_halt() that allows early termination and
+/*
+ * This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
  * crash their internal firmware when the status is requested after a halt.
  *
@@ -280,8 +288,10 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe,
 
 	/* stalled */
 	case -EPIPE:
-		/* for control endpoints, (used by CB[I]) a stall indicates
-		 * a failed command */
+		/*
+		 * for control endpoints, (used by CB[I]) a stall indicates
+		 * a failed command
+		 */
 		if (usb_pipecontrol(pipe)) {
 			usb_stor_dbg(us, "-- stall on control pipe\n");
 			return USB_STOR_XFER_STALLED;
@@ -433,8 +443,10 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
 		return USB_STOR_XFER_ERROR;
 	}
 
-	/* since the block has been initialized successfully, it's now
-	 * okay to cancel it */
+	/*
+	 * since the block has been initialized successfully, it's now
+	 * okay to cancel it
+	 */
 	set_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
 
 	/* did an abort occur during the submission? */
@@ -515,7 +527,8 @@ EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
  * Transport routines
  ***********************************************************************/
 
-/* There are so many devices that report the capacity incorrectly,
+/*
+ * There are so many devices that report the capacity incorrectly,
  * this routine was written to counteract some of the resulting
  * problems.
  */
@@ -533,7 +546,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
 		[12]	= 0x14			/* Record Not Found */
 	};
 
-	/* If last-sector problems can't occur, whether because the
+	/*
+	 * If last-sector problems can't occur, whether because the
 	 * capacity was already decremented or because the device is
 	 * known to report the correct capacity, then we don't need
 	 * to do anything.
@@ -559,13 +573,15 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
 
 	if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
 
-		/* The command succeeded.  We know this device doesn't
+		/*
+		 * The command succeeded.  We know this device doesn't
 		 * have the last-sector bug, so stop checking it.
 		 */
 		us->use_last_sector_hacks = 0;
 
 	} else {
-		/* The command failed.  Allow up to 3 retries in case this
+		/*
+		 * The command failed.  Allow up to 3 retries in case this
 		 * is some normal sort of failure.  After that, assume the
 		 * capacity is wrong and we're trying to access the sector
 		 * beyond the end.  Replace the result code and sense data
@@ -581,7 +597,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
 	}
 
  done:
-	/* Don't reset the retry counter for TEST UNIT READY commands,
+	/*
+	 * Don't reset the retry counter for TEST UNIT READY commands,
 	 * because they get issued after device resets which might be
 	 * caused by a failed last-sector access.
 	 */
@@ -589,7 +606,8 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
 		us->last_sector_retries = 0;
 }
 
-/* Invoke the transport and basic error-handling/recovery methods
+/*
+ * Invoke the transport and basic error-handling/recovery methods
  *
  * This is used by the protocol layers to actually send the message to
  * the device and receive the response.
@@ -603,7 +621,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 	scsi_set_resid(srb, 0);
 	result = us->transport(srb, us);
 
-	/* if the command gets aborted by the higher layers, we need to
+	/*
+	 * if the command gets aborted by the higher layers, we need to
 	 * short-circuit all other processing
 	 */
 	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -628,7 +647,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	srb->result = SAM_STAT_GOOD;
 
-	/* Determine if we need to auto-sense
+	/*
+	 * Determine if we need to auto-sense
 	 *
 	 * I normally don't use a flag like this, but it's almost impossible
 	 * to understand what's going on here if I don't.
@@ -728,7 +748,8 @@ Retry_Sense:
 			goto Handle_Errors;
 		}
 
-		/* Some devices claim to support larger sense but fail when
+		/*
+		 * Some devices claim to support larger sense but fail when
 		 * trying to request it. When a transport failure happens
 		 * using US_FS_SANE_SENSE, we always retry with a standard
 		 * (small) sense request. This fixes some USB GSM modems
@@ -746,7 +767,8 @@ Retry_Sense:
 		if (temp_result != USB_STOR_TRANSPORT_GOOD) {
 			usb_stor_dbg(us, "-- auto-sense failure\n");
 
-			/* we skip the reset if this happens to be a
+			/*
+			 * we skip the reset if this happens to be a
 			 * multi-target device, since failure of an
 			 * auto-sense is perfectly valid
 			 */
@@ -756,7 +778,8 @@ Retry_Sense:
 			return;
 		}
 
-		/* If the sense data returned is larger than 18-bytes then we
+		/*
+		 * If the sense data returned is larger than 18-bytes then we
 		 * assume this device supports requesting more in the future.
 		 * The response code must be 70h through 73h inclusive.
 		 */
@@ -767,7 +790,8 @@ Retry_Sense:
 			usb_stor_dbg(us, "-- SANE_SENSE support enabled\n");
 			us->fflags |= US_FL_SANE_SENSE;
 
-			/* Indicate to the user that we truncated their sense
+			/*
+			 * Indicate to the user that we truncated their sense
 			 * because we didn't know it supported larger sense.
 			 */
 			usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n",
@@ -795,13 +819,15 @@ Retry_Sense:
 					    SCSI_SENSE_BUFFERSIZE, 4);
 		fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
 
-		/* We often get empty sense data.  This could indicate that
+		/*
+		 * We often get empty sense data.  This could indicate that
 		 * everything worked or that there was an unspecified
 		 * problem.  We have to decide which.
 		 */
 		if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
 		    fm_ili == 0) {
-			/* If things are really okay, then let's show that.
+			/*
+			 * If things are really okay, then let's show that.
 			 * Zero out the sense buffer so the higher layers
 			 * won't realize we did an unsolicited auto-sense.
 			 */
@@ -809,7 +835,8 @@ Retry_Sense:
 				srb->result = SAM_STAT_GOOD;
 				srb->sense_buffer[0] = 0x0;
 
-			/* If there was a problem, report an unspecified
+			/*
+			 * If there was a problem, report an unspecified
 			 * hardware error to prevent the higher layers from
 			 * entering an infinite retry loop.
 			 */
@@ -860,20 +887,26 @@ Retry_Sense:
 	last_sector_hacks(us, srb);
 	return;
 
-	/* Error and abort processing: try to resynchronize with the device
+	/*
+	 * Error and abort processing: try to resynchronize with the device
 	 * by issuing a port reset.  If that fails, try a class-specific
-	 * device reset. */
+	 * device reset.
+	 */
   Handle_Errors:
 
-	/* Set the RESETTING bit, and clear the ABORTING bit so that
-	 * the reset may proceed. */
+	/*
+	 * Set the RESETTING bit, and clear the ABORTING bit so that
+	 * the reset may proceed.
+	 */
 	scsi_lock(us_to_host(us));
 	set_bit(US_FLIDX_RESETTING, &us->dflags);
 	clear_bit(US_FLIDX_ABORTING, &us->dflags);
 	scsi_unlock(us_to_host(us));
 
-	/* We must release the device lock because the pre_reset routine
-	 * will want to acquire it. */
+	/*
+	 * We must release the device lock because the pre_reset routine
+	 * will want to acquire it.
+	 */
 	mutex_unlock(&us->dev_mutex);
 	result = usb_stor_port_reset(us);
 	mutex_lock(&us->dev_mutex);
@@ -891,10 +924,12 @@ Retry_Sense:
 /* Stop the current URB transfer */
 void usb_stor_stop_transport(struct us_data *us)
 {
-	/* If the state machine is blocked waiting for an URB,
+	/*
+	 * If the state machine is blocked waiting for an URB,
 	 * let's wake it up.  The test_and_clear_bit() call
 	 * guarantees that if a URB has just been submitted,
-	 * it won't be cancelled more than once. */
+	 * it won't be cancelled more than once.
+	 */
 	if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
 		usb_stor_dbg(us, "-- cancelling URB\n");
 		usb_unlink_urb(us->current_urb);
@@ -955,7 +990,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* STATUS STAGE */
 
-	/* NOTE: CB does not have a status stage.  Silly, I know.  So
+	/*
+	 * NOTE: CB does not have a status stage.  Silly, I know.  So
 	 * we have to catch this at a higher level.
 	 */
 	if (us->protocol != USB_PR_CBI)
@@ -967,7 +1003,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	/* UFI gives us ASC and ASCQ, like a request sense
+	/*
+	 * UFI gives us ASC and ASCQ, like a request sense
 	 *
 	 * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI
 	 * devices, so we ignore the information for those commands.  Note
@@ -983,7 +1020,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_GOOD;
 	}
 
-	/* If not UFI, we interpret the data as a result code 
+	/*
+	 * If not UFI, we interpret the data as a result code 
 	 * The first byte should always be a 0x0.
 	 *
 	 * Some bogus devices don't follow that rule.  They stuff the ASC
@@ -1005,7 +1043,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	}
 	return USB_STOR_TRANSPORT_ERROR;
 
-	/* the CBI spec requires that the bulk pipe must be cleared
+	/*
+	 * the CBI spec requires that the bulk pipe must be cleared
 	 * following any data-in/out command failure (section 2.4.3.1.3)
 	 */
   Failed:
@@ -1107,9 +1146,11 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* DATA STAGE */
 	/* send/receive data payload, if there is any */
 
-	/* Some USB-IDE converter chips need a 100us delay between the
+	/*
+	 * Some USB-IDE converter chips need a 100us delay between the
 	 * command phase and the data phase.  Some devices need a little
-	 * more than that, probably because of clock rate inaccuracies. */
+	 * more than that, probably because of clock rate inaccuracies.
+	 */
 	if (unlikely(us->fflags & US_FL_GO_SLOW))
 		usleep_range(125, 150);
 
@@ -1121,7 +1162,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		if (result == USB_STOR_XFER_ERROR)
 			return USB_STOR_TRANSPORT_ERROR;
 
-		/* If the device tried to send back more data than the
+		/*
+		 * If the device tried to send back more data than the
 		 * amount requested, the spec requires us to transfer
 		 * the CSW anyway.  Since there's no point retrying the
 		 * the command, we'll return fake sense data indicating
@@ -1156,7 +1198,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		}
 	}
 
-	/* See flow chart on pg 15 of the Bulk Only Transport spec for
+	/*
+	 * See flow chart on pg 15 of the Bulk Only Transport spec for
 	 * an explanation of how this code works.
 	 */
 
@@ -1165,7 +1208,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 				bcs, US_BULK_CS_WRAP_LEN, &cswlen);
 
-	/* Some broken devices add unnecessary zero-length packets to the
+	/*
+	 * Some broken devices add unnecessary zero-length packets to the
 	 * end of their data transfers.  Such packets show up as 0-length
 	 * CSWs.  If we encounter such a thing, try to read the CSW again.
 	 */
@@ -1201,7 +1245,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	/* Some broken devices report odd signatures, so we do not check them
+	/*
+	 * Some broken devices report odd signatures, so we do not check them
 	 * for validity against the spec. We store the first one we see,
 	 * and check subsequent transfers for validity against this signature.
 	 */
@@ -1217,11 +1262,14 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	/* try to compute the actual residue, based on how much data
-	 * was really transferred and what the device tells us */
+	/*
+	 * try to compute the actual residue, based on how much data
+	 * was really transferred and what the device tells us
+	 */
 	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
 
-		/* Heuristically detect devices that generate bogus residues
+		/*
+		 * Heuristically detect devices that generate bogus residues
 		 * by seeing what happens with INQUIRY and READ CAPACITY
 		 * commands.
 		 */
@@ -1259,7 +1307,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 			return USB_STOR_TRANSPORT_FAILED;
 
 		case US_BULK_STAT_PHASE:
-			/* phase error -- note that a transport reset will be
+			/*
+			 * phase error -- note that a transport reset will be
 			 * invoked by the invoke_transport() function
 			 */
 			return USB_STOR_TRANSPORT_ERROR;
@@ -1274,7 +1323,8 @@ EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
  * Reset routines
  ***********************************************************************/
 
-/* This is the common part of the device reset code.
+/*
+ * This is the common part of the device reset code.
  *
  * It's handy that every transport mechanism uses the control endpoint for
  * resets.
@@ -1302,8 +1352,10 @@ static int usb_stor_reset_common(struct us_data *us,
 		return result;
 	}
 
-	/* Give the device some time to recover from the reset,
-	 * but don't delay disconnect processing. */
+	/*
+	 * Give the device some time to recover from the reset,
+	 * but don't delay disconnect processing.
+	 */
 	wait_event_interruptible_timeout(us->delay_wait,
 			test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
 			HZ*6);
@@ -1328,8 +1380,7 @@ static int usb_stor_reset_common(struct us_data *us,
 	return result;
 }
 
-/* This issues a CB[I] Reset to the device in question
- */
+/* This issues a CB[I] Reset to the device in question */
 #define CB_RESET_CMD_SIZE	12
 
 int usb_stor_CB_reset(struct us_data *us)
@@ -1343,7 +1394,8 @@ int usb_stor_CB_reset(struct us_data *us)
 }
 EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
-/* This issues a Bulk-only Reset to the device in question, including
+/*
+ * This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
  */
 int usb_stor_Bulk_reset(struct us_data *us)
@@ -1354,7 +1406,8 @@ int usb_stor_Bulk_reset(struct us_data *us)
 }
 EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
-/* Issue a USB port reset to the device.  The caller must not hold
+/*
+ * Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
  */
 int usb_stor_port_reset(struct us_data *us)
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 9369d752d419..dae3ecd2e6cf 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Transport Functions Header File
  *
  * Current development and maintenance by:
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 16bc679dc2fc..4d49fce406e1 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -799,7 +799,8 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 
 	sdev->hostdata = devinfo;
 
-	/* USB has unusual DMA-alignment requirements: Although the
+	/*
+	 * USB has unusual DMA-alignment requirements: Although the
 	 * starting address of each scatter-gather element doesn't matter,
 	 * the length of each element except the last must be divisible
 	 * by the Bulk maxpacket value.  There's currently no way to
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index fa3e9edaa2cf..763bc03032a1 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Alauda-based card readers
+/*
+ * Unusual Devices File for the Alauda-based card readers
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 82e8ed0324e3..e9a2eb88869a 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+/*
+ * Unusual Devices File for devices based on the Cypress USB/ATA bridge
  *	with support for ATACB
  *
  * This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index 582a603c78be..5049b6bbe5d5 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Datafab USB Compact Flash reader
+/*
+ * Unusual Devices File for the Datafab USB Compact Flash reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -79,7 +80,8 @@ UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
-/* Reported by Felix Moeller <felix@derklecks.de>
+/*
+ * Reported by Felix Moeller <felix@derklecks.de>
  * in Germany this is sold by Hama with the productnumber 46952
  * as "DualSlot CompactFlash(TM) & MStick Drive USB"
  */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ffe4209067b..aa3539238848 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Unusual Devices File
  *
  * Current development and maintenance by:
@@ -25,13 +26,15 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-/* IMPORTANT NOTE: This file must be included in another file which does
+/*
+ * IMPORTANT NOTE: This file must be included in another file which does
  * the following thing for it to work:
  * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
  * before this file is included.
  */
 
-/* If you edit this file, please try to keep it sorted first by VendorID,
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
  * then by ProductID.
  *
  * If you want to add an entry for this file, be sure to include the
@@ -47,13 +50,15 @@
  * <usb-storage@lists.one-eyed-alien.net>
  */
 
-/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
+/*
+ * Note: If you add an entry only in order to set the CAPACITY_OK flag,
  * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV.  This is
  * because such entries mark devices which actually work correctly,
  * as opposed to devices that do something strangely or wrongly.
  */
 
-/* In-kernel mode switching is deprecated.  Do not add new devices to
+/*
+ * In-kernel mode switching is deprecated.  Do not add new devices to
  * this list for the sole purpose of switching them to a different
  * mode.  Existing userspace solutions are superior.
  *
@@ -66,8 +71,7 @@
 #define NO_SDDR09
 #endif
 
-/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
- */
+/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
 		"ATMEL",
 		"SND1 Storage",
@@ -93,7 +97,8 @@ UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-/* Reported by Grant Grundler <grundler@parisc-linux.org>
+/*
+ * Reported by Grant Grundler <grundler@parisc-linux.org>
  * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
  */
 UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
@@ -107,7 +112,8 @@ UNUSUAL_DEV(  0x03f3, 0x0001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
+/*
+ * Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
  * for USB floppies that need the SINGLE_LUN enforcement.
  */
@@ -124,7 +130,8 @@ UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Deduced by Jonathan Woithe <jwoithe@just42.net>
+/*
+ * Deduced by Jonathan Woithe <jwoithe@just42.net>
  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
  * always fails and confuses drive.
  */
@@ -167,8 +174,10 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Andrew Nayenko <relan@bk.ru>
- * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+/*
+ * Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com>
+ */
 UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
 		"Nokia",
 		"Nokia 6288",
@@ -196,16 +205,20 @@ UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
- * Einar Th. Einarsson <einarthered@gmail.com> */
+/*
+ * Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com>
+ */
 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 		"Nokia",
 		"N91",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
-/* Reported by Jiri Slaby <jirislaby@gmail.com> and
- * Rene C. Castberg <Rene@Castberg.org> */
+/*
+ * Reported by Jiri Slaby <jirislaby@gmail.com> and
+ * Rene C. Castberg <Rene@Castberg.org>
+ */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 		"Nokia",
 		"N80",
@@ -269,8 +282,10 @@ UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-/* Patch submitted by Daniel Drake <dsd@gentoo.org>
- * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+/*
+ * Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2
+ */
 UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 		"Neuros Audio",
 		"USB 2.0 HD 2.5",
@@ -288,17 +303,18 @@ UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
 /*
-* Bohdan Linda <bohdan.linda@gmail.com>
-* 1GB USB sticks MyFlash High Speed. I have restricted
-* the revision to my model only
-*/
+ * Bohdan Linda <bohdan.linda@gmail.com>
+ * 1GB USB sticks MyFlash High Speed. I have restricted
+ * the revision to my model only
+ */
 UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 		"USB 2.0",
 		"Flash Disk",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
-/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+/*
+ * Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
  * Obviously the PROM has not been customized by the VAR;
  * the Vendor and Product string descriptors are:
  *	Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
@@ -347,24 +363,30 @@ UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
 
-/* Reported by Paul Stewart <stewart@wetlogic.net>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 		"Hitachi",
 		"DVD-CAM DZ-MV100A Camcorder",
 		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
 
-/* BENQ DC5330
+/*
+ * BENQ DC5330
  * Reported by Manuel Fombuena <mfombuena@ya.com> and
- * Frank Copeland <fjc@thingy.apana.org.au> */
+ * Frank Copeland <fjc@thingy.apana.org.au>
+ */
 UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Patch for Nikon coolpix 2000
- * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
+/*
+ * Patch for Nikon coolpix 2000
+ * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>
+ */
 UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
 		"NIKON",
 		"NIKON DSC E2000",
@@ -378,21 +400,26 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
-/* Reported by Simon Levitt <simon@whattf.com>
- * This entry needs Sub and Proto fields */
+/*
+ * Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields
+ */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 		"Epson",
 		"875DC Storage",
 		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
 
-/* Reported by Khalid Aziz <khalid@gonehiking.org>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 		"Epson",
 		"785EPX Storage",
 		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
-/* Not sure who reported this originally but
+/*
+ * Not sure who reported this originally but
  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
  * flag be added */
 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
@@ -400,7 +427,8 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 		"FinePix 1400Zoom",
 		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
-/* Reported by Ondrej Zary <linux@rainbow-software.org>
+/*
+ * Reported by Ondrej Zary <linux@rainbow-software.org>
  * The device reports one sector more and breaks when that sector is accessed
  */
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
@@ -409,7 +437,8 @@ UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* Reported by Kriston Fincher <kriston@airmail.net>
+/*
+ * Reported by Kriston Fincher <kriston@airmail.net>
  * Patch submitted by Sean Millichamp <sean@bruenor.org>
  * This is to support the Panasonic PalmCam PV-SD4090
  * This entry is needed because the device reports Sub=ff 
@@ -419,8 +448,10 @@ UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 		"LS-120 Camera",
 		USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
 
-/* From Yukihiro Nakai, via zaitcev@yahoo.com.
- * This is needed for CB instead of CBI */
+/*
+ * From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI
+ */
 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 		"Sharp CE-CW05",
 		"CD-R/RW Drive",
@@ -440,7 +471,8 @@ UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
-/* Most of the following entries were developed with the help of
+/*
+ * Most of the following entries were developed with the help of
  * Shuttle/SCM directly.
  */
 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
@@ -536,7 +568,8 @@ UNUSUAL_DEV(  0x04e8, 0x5136, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
  */
@@ -553,7 +586,8 @@ UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Iomega Clik! Drive 
+/*
+ * Iomega Clik! Drive 
  * Reported by David Chatenay <dchatenay@hotmail.com>
  * The reason this is needed is not fully known.
  */
@@ -570,7 +604,8 @@ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_CAPACITY_OK ),
 
-/* Yakumo Mega Image 37
+/*
+ * Yakumo Mega Image 37
  * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
@@ -578,8 +613,10 @@ UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Another Yakumo camera.
- * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+/*
+ * Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it>
+ */
 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
@@ -593,16 +630,20 @@ UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Yakumo Mega Image 47
- * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
+/*
+ * Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de>
+ */
 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Paul Ortyl <ortylp@3miasto.net>
- * Note that it's similar to the device above, only different prodID */
+/*
+ * Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID
+ */
 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
@@ -615,8 +656,10 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		USB_SC_SCSI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
- * This entry is needed because the device reports Sub=ff */
+/*
+ * Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff
+ */
 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
 		"DSC-T1/T5/H5",
@@ -719,7 +762,8 @@ UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 		USB_SC_DEVICE,  USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
-/* Reported by Johann Cardon <johann.cardon@free.fr>
+/*
+ * Reported by Johann Cardon <johann.cardon@free.fr>
  * This entry is needed only because the device reports
  * bInterfaceClass = 0xff (vendor-specific)
  */
@@ -741,7 +785,8 @@ UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 		"Digital Camera EX-20 DSC",
 		USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
 
-/* Reported by Andre Welter <a.r.welter@gmx.de>
+/*
+ * Reported by Andre Welter <a.r.welter@gmx.de>
  * This antique device predates the release of the Bulk-only Transport
  * spec, and if it gets a Get-Max-LUN then it requires the host to do a
  * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
@@ -773,7 +818,8 @@ UNUSUAL_DEV(  0x059f, 0x0651, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
-/* Submitted by Joel Bourquard <numlock@freesurf.ch>
+/*
+ * Submitted by Joel Bourquard <numlock@freesurf.ch>
  * Some versions of this device need the SubClass and Protocol overrides
  * while others don't.
  */
@@ -783,7 +829,8 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 		USB_SC_SCSI, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-/* Submitted by Sven Anderson <sven-linux@anderson.de>
+/*
+ * Submitted by Sven Anderson <sven-linux@anderson.de>
  * There are at least four ProductIDs used for iPods, so I added 0x1202 and
  * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
  * to change with firmware updates, I changed the range to maximum for all
@@ -824,7 +871,8 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
  * Option N.V. mobile broadband modems
  * Ignore driver CD mode and force into modem mode by default.
  */
@@ -843,7 +891,8 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* The following two entries are for a Genesys USB to IDE
+/*
+ * The following two entries are for a Genesys USB to IDE
  * converter chip, but it changes its ProductId depending
  * on whether or not a disk or an optical device is enclosed
  * They were originally reported by Alexander Oltu
@@ -873,8 +922,10 @@ UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
-/* Reported by Hanno Boeck <hanno@gmx.de>
- * Taken from the Lycoris Kernel */
+/*
+ * Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel
+ */
 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 		"Vivitar",
 		"Vivicam 35Xx",
@@ -908,8 +959,10 @@ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
 		US_FL_NOT_LOCKABLE ),
 
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
-/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
- * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+/*
+ * Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de>
+ */
 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
 		"Prolific Technology Inc.",
 		"Mass Storage Device",
@@ -961,7 +1014,8 @@ UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
 		US_FL_NO_READ_CAPACITY_16),
 
-/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+/*
+ * Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
  * Support the following product :
  *    "Dane-Elec MediaTouch"
  */
@@ -971,7 +1025,8 @@ UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
-/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
+/*
+ * Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
  * at least in the following products:
@@ -1040,7 +1095,8 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		US_FL_SINGLE_LUN ),
 #endif
 
-/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+/*
+ * Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
  * Only revision 1.13 tested (same for all of the above devices,
  * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
  * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
@@ -1052,7 +1108,8 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
-/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+/*
+ * Reported by Rauch Wolke <rauchwolke@gmx.net>
  * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
  */
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
@@ -1061,7 +1118,8 @@ UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
-/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+/*
+ * Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
  *   are using transport protocol CB.
@@ -1119,7 +1177,8 @@ UNUSUAL_DEV(  0x084b, 0xa001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+/*
+ * Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
  * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
@@ -1131,7 +1190,8 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
-/* Reported by <ttkspam@free.fr>
+/*
+ * Reported by <ttkspam@free.fr>
  * The device reports a vendor-specific device class, requiring an
  * explicit vendor/product match.
  */
@@ -1140,11 +1200,12 @@ UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
 		"FW_Omega2",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
 
-/* Andrew Lunn <andrew@lunn.ch>
+/*
+ * Andrew Lunn <andrew@lunn.ch>
  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
  * on LUN 4.
  * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
-*/
+ */
 UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
 		"PanDigital",
 		"Photo Frame",
@@ -1170,7 +1231,8 @@ UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN),
 
-/* Submitted by Dylan Taft <d13f00l@gmail.com>
+/*
+ * Submitted by Dylan Taft <d13f00l@gmail.com>
  * US_FL_IGNORE_RESIDUE Needed
  */
 UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
@@ -1179,7 +1241,8 @@ UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
-/* Entry needed for flags. Moreover, all devices with this ID use
+/*
+ * Entry needed for flags. Moreover, all devices with this ID use
  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
  * One example is "Trumpion Digital Research MYMP3".
  * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
@@ -1190,7 +1253,8 @@ UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
-/* Reported by Filippo Bardelli <filibard@libero.it>
+/*
+ * Reported by Filippo Bardelli <filibard@libero.it>
  * The device reports a subclass of RBC, which is wrong.
  */
 UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
@@ -1213,7 +1277,8 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+/*
+ * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
  * This card reader returns "Illegal Request, Logical Block Address
  * Out of Range" for the first READ(10) after a new card is inserted.
  */
@@ -1223,7 +1288,8 @@ UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
-/* This Pentax still camera is not conformant
+/*
+ * This Pentax still camera is not conformant
  * to the USB storage specification: -
  * - It does not like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
@@ -1236,8 +1302,10 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* These are virtual windows driver CDs, which the zd1211rw driver
- * automatically converts into WLAN devices. */
+/*
+ * These are virtual windows driver CDs, which the zd1211rw driver
+ * automatically converts into WLAN devices.
+ */
 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
 		"ZyXEL",
 		"G-220F USB-WLAN Install",
@@ -1250,7 +1318,8 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
-/* Reported by Dan Williams <dcbw@redhat.com>
+/*
+ * Reported by Dan Williams <dcbw@redhat.com>
  * Option N.V. mobile broadband modems
  * Ignore driver CD mode and force into modem mode by default.
  */
@@ -1262,20 +1331,24 @@ UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
 		0),
 
-/* Reported by F. Aben <f.aben@option.com>
+/*
+ * Reported by F. Aben <f.aben@option.com>
  * This device (wrongly) has a vendor-specific device descriptor.
  * The entry is needed so usb-storage can bind to it's mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 		"Option",
 		"GI 0401 SD-Card",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
-/* Reported by Jan Dumon <j.dumon@option.com>
+/*
+ * Reported by Jan Dumon <j.dumon@option.com>
  * These devices (wrongly) have a vendor-specific device descriptor.
  * These entries are needed so usb-storage can bind to their mass-storage
- * interface as an interface driver */
+ * interface as an interface driver
+ */
 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
 		"Option",
 		"GI 0431 SD-Card",
@@ -1419,7 +1492,8 @@ UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* Reported by Lubomir Blaha <tritol@trilogic.cz>
+/*
+ * Reported by Lubomir Blaha <tritol@trilogic.cz>
  * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
  * works for me. Can anybody correct these values? (I able to test corrected
  * version.)
@@ -1430,8 +1504,10 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* Reported by Edward Chapman (taken from linux-usb mailing list)
-   Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
+/*
+ * Reported by Edward Chapman (taken from linux-usb mailing list)
+ * Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive
+ */
 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 		"Netac",
 		"USB Flash Disk",
@@ -1439,8 +1515,10 @@ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 		US_FL_IGNORE_RESIDUE ),
 
 
-/* Patch by Stephan Walter <stephan.walter@epfl.ch>
- * I don't know why, but it works... */
+/*
+ * Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works...
+ */
 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
 		"WINWARD",
 		"Music Disk",
@@ -1468,8 +1546,10 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
-/* Submitted by Daniel Drake <dsd@gentoo.org>
- * Reported by dayul on the Gentoo Forums */
+/*
+ * Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums
+ */
 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
 		"Ours Technology",
 		"Flash Disk",
@@ -1483,15 +1563,18 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Benjamin Schiller <sbenni@gmx.de>
- * It is also sold by Easylite as DJ 20 */
+/*
+ * Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20
+ */
 UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
 		"Typhoon",
 		"My DJ 1820",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
 
-/* Patch by Leonid Petrov mail at lpetrov.net
+/*
+ * Patch by Leonid Petrov mail at lpetrov.net
  * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
  * http://www.qbik.ch/usb/devices/showdev.php?id=1705
  * Updated to 103 device by MJ Ray mjr at phonecoop.coop
@@ -1502,7 +1585,8 @@ UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* David Kuehling <dvdkhlng@gmx.de>:
+/*
+ * David Kuehling <dvdkhlng@gmx.de>:
  * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
  * errors when trying to write.
  */
@@ -1540,8 +1624,10 @@ UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE),
 
-/* Reported by Jan Mate <mate@fiit.stuba.sk>
- * and by Soeren Sonnenburg <kernel@nn7.de> */
+/*
+ * Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de>
+ */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
@@ -1562,7 +1648,8 @@ UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+/*
+ * Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.
  * Devices with bcd > 110 seem to not need it while those
@@ -1586,7 +1673,8 @@ UNUSUAL_DEV(0x1058, 0x070a, 0x0000, 0x9999,
 		"My Passport HDD",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_WRITE_CACHE),
 
-/* Reported by Fabio Venturi <f.venturi@tdnet.it>
+/*
+ * Reported by Fabio Venturi <f.venturi@tdnet.it>
  * The device reports a vendor-specific bDeviceClass.
  */
 UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
@@ -1595,7 +1683,8 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0),
 
-/* Reported by Pascal Terjan <pterjan@mandriva.com>
+/*
+ * Reported by Pascal Terjan <pterjan@mandriva.com>
  * Ignore driver CD mode and force into modem mode by default.
  */
 UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
@@ -1603,7 +1692,8 @@ UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
            "USB Mass Storage",
            USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
 
-/* Reported by Kevin Lloyd <linux@sierrawireless.com>
+/*
+ * Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
  * device.
@@ -1614,7 +1704,8 @@ UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
 		0),
 
-/* Reported by Jaco Kroon <jaco@kroon.co.za>
+/*
+ * Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
  * devices) misbehaves and causes a bunch of invalid I/O errors.
  */
@@ -1624,7 +1715,8 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by fangxiaozhi <huananhu@huawei.com>
+/*
+ * Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
 UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
@@ -1993,7 +2085,8 @@ UNUSUAL_DEV(  0x152d, 0x0567, 0x0114, 0x0116,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
-/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+/*
+ * Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
  * JMicron responds to USN and several other SCSI ioctls with a
  * residue that causes subsequent I/O requests to fail.  */
 UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
@@ -2009,7 +2102,8 @@ UNUSUAL_DEV(  0x152d, 0x2566, 0x0114, 0x0114,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
-/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+/*
+ * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
  * and Mac USB Dock USB-SCSI */
 UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
 		"Entrega Technologies",
@@ -2017,8 +2111,10 @@ UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Robert Schedel <r.schedel@yahoo.de>
- * Note: this is a 'super top' device like the above 14cd/6600 device */
+/*
+ * Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device
+ */
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		"Teac",
 		"HD-35PUK-B",
@@ -2045,10 +2141,12 @@ UNUSUAL_DEV(  0x1822, 0x0001, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software
- * Uploading of pictures happens over the corresponding /dev/sg device. */
+ * Uploading of pictures happens over the corresponding /dev/sg device.
+ */
 UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
 		"BUILDWIN",
 		"Photo Frame",
@@ -2065,19 +2163,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
-/* Reported by Oliver Neukum <oneukum@suse.com>
+/*
+ * Reported by Oliver Neukum <oneukum@suse.com>
  * This device morphes spontaneously into another device if the access
  * pattern of Windows isn't followed. Thus writable media would be dirty
  * if the initial instance is used. So the device is limited to its
  * virtual CD.
- * And yes, the concept that BCD goes up to 9 is not heeded */
+ * And yes, the concept that BCD goes up to 9 is not heeded
+ */
 UNUSUAL_DEV( 0x19d2, 0x1225, 0x0000, 0xffff,
 		"ZTE,Incorporated",
 		"ZTE WCDMA Technologies MSM",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-/* Reported by Sven Geggus <sven-usbst@geggus.net>
+/*
+ * Reported by Sven Geggus <sven-usbst@geggus.net>
  * This encrypted pen drive returns bogus data for the initial READ(10).
  */
 UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
@@ -2086,7 +2187,8 @@ UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
-/* Reported by Hans de Goede <hdegoede@redhat.com>
+/*
+ * Reported by Hans de Goede <hdegoede@redhat.com>
  * These are mini projectors using USB for both power and video data transport
  * The usb-storage interface is a virtual windows driver CD, which the gm12u320
  * driver automatically converts into framebuffer & kms dri device nodes.
@@ -2097,9 +2199,11 @@ UNUSUAL_DEV( 0x1de1, 0xc102, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
-/* Patch by Richard Schütz <r.schtz@t-online.de>
+/*
+ * Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
- * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly.
+ */
 UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
 		"TrekStor GmbH & Co. KG",
 		"DataStation maxi g.u",
@@ -2126,7 +2230,8 @@ UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
-/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+/*
+ * patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
  */
 UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
@@ -2153,7 +2258,8 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
-/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
+/*
+ * Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330
  */
 UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 59a261155b98..1f5aab42ece2 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Freecom USB/IDE adaptor
+/*
+ * Unusual Devices File for the Freecom USB/IDE adaptor
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index 14cca0c48302..9b6862ec3d4f 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC
+/*
+ * Unusual Devices File for In-System Design, Inc. ISD200 ASIC
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index 54be78b5d643..413e64fa6b95 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
+/*
+ * Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index 6df03972a22c..e6fad3aeae20 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Rio Karma
+/*
+ * Unusual Devices File for the Rio Karma
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index 0abb819c7405..425dc22f345a 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button
+/*
+ * Unusual Devices File for the Maxtor OneTouch USB hard drive's button
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -18,7 +19,8 @@
 #if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
 		defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE)
 
-/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+/*
+ * Submitted by: Nick Sillik <n.sillik@temple.edu>
  * Needed for OneTouch extension to usb-storage
  */
 UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index e41f50c95ed4..8fe624ad302a 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -1,4 +1,5 @@
-/* Driver for Realtek RTS51xx USB card reader
+/*
+ * Driver for Realtek RTS51xx USB card reader
  *
  * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
  *
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index 59a7e37b6c11..d9d38ac4abf9 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
+/*
+ * Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index fcb7e12c598f..ebb1d1c6c467 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
+/*
+ * Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 53341a77d89f..cbea9f329e71 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -1,4 +1,5 @@
-/* Driver for USB Attached SCSI devices - Unusual Devices File
+/*
+ * Driver for USB Attached SCSI devices - Unusual Devices File
  *
  *   (c) 2013 Hans de Goede <hdegoede@redhat.com>
  *
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 38e79c4e6d6a..2044ad5ef5e4 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -1,4 +1,5 @@
-/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
+/*
+ * Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 9de988a0f856..ef2d8cde6ef7 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  *
  * Current development and maintenance by:
  *   (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
@@ -97,7 +98,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
  * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
 
-/* The vendor name should be kept at eight characters or less, and
+/*
+ *The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
  * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
  * normally generated by a device through the INQUIRY response will be
@@ -191,8 +193,10 @@ int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 	if (us->suspend_resume_hook)
 		(us->suspend_resume_hook)(us, US_SUSPEND);
 
-	/* When runtime PM is working, we'll set a flag to indicate
-	 * whether we should autoresume when a SCSI request arrives. */
+	/*
+	 * When runtime PM is working, we'll set a flag to indicate
+	 * whether we should autoresume when a SCSI request arrives.
+	 */
 
 	mutex_unlock(&us->dev_mutex);
 	return 0;
@@ -220,8 +224,10 @@ int usb_stor_reset_resume(struct usb_interface *iface)
 	/* Report the reset to the SCSI core */
 	usb_stor_report_bus_reset(us);
 
-	/* FIXME: Notify the subdrivers that they need to reinitialize
-	 * the device */
+	/*
+	 * FIXME: Notify the subdrivers that they need to reinitialize
+	 * the device
+	 */
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
@@ -250,8 +256,10 @@ int usb_stor_post_reset(struct usb_interface *iface)
 	/* Report the reset to the SCSI core */
 	usb_stor_report_bus_reset(us);
 
-	/* FIXME: Notify the subdrivers that they need to reinitialize
-	 * the device */
+	/*
+	 * FIXME: Notify the subdrivers that they need to reinitialize
+	 * the device
+	 */
 
 	mutex_unlock(&us->dev_mutex);
 	return 0;
@@ -274,15 +282,17 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data,
 		return;
 
 	memset(data+8, ' ', 28);
-	if (data[0]&0x20) { /* USB device currently not connected. Return
-			      peripheral qualifier 001b ("...however, the
-			      physical device is not currently connected
-			      to this logical unit") and leave vendor and
-			      product identification empty. ("If the target
-			      does store some of the INQUIRY data on the
-			      device, it may return zeros or ASCII spaces
-			      (20h) in those fields until the data is
-			      available from the device."). */
+	if (data[0]&0x20) { /*
+			     * USB device currently not connected. Return
+			     * peripheral qualifier 001b ("...however, the
+			     * physical device is not currently connected
+			     * to this logical unit") and leave vendor and
+			     * product identification empty. ("If the target
+			     * does store some of the INQUIRY data on the
+			     * device, it may return zeros or ASCII spaces
+			     * (20h) in those fields until the data is
+			     * available from the device.").
+			     */
 	} else {
 		u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
 		int n;
@@ -336,7 +346,8 @@ static int usb_stor_control_thread(void * __us)
 
 		scsi_unlock(host);
 
-		/* reject the command if the direction indicator
+		/*
+		 * reject the command if the direction indicator
 		 * is UNKNOWN
 		 */
 		if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
@@ -344,7 +355,8 @@ static int usb_stor_control_thread(void * __us)
 			us->srb->result = DID_ERROR << 16;
 		}
 
-		/* reject if target != 0 or if LUN is higher than
+		/*
+		 * reject if target != 0 or if LUN is higher than
 		 * the maximum known LUN
 		 */
 		else if (us->srb->device->id &&
@@ -362,8 +374,10 @@ static int usb_stor_control_thread(void * __us)
 			us->srb->result = DID_BAD_TARGET << 16;
 		}
 
-		/* Handle those devices which need us to fake
-		 * their inquiry data */
+		/*
+		 * Handle those devices which need us to fake
+		 * their inquiry data
+		 */
 		else if ((us->srb->cmnd[0] == INQUIRY) &&
 			    (us->fflags & US_FL_FIX_INQUIRY)) {
 			unsigned char data_ptr[36] = {
@@ -395,11 +409,13 @@ SkipForAbort:
 			usb_stor_dbg(us, "scsi command aborted\n");
 		}
 
-		/* If an abort request was received we need to signal that
+		/*
+		 * If an abort request was received we need to signal that
 		 * the abort has finished.  The proper test for this is
 		 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
 		 * the timeout might have occurred after the command had
-		 * already completed with a different result code. */
+		 * already completed with a different result code.
+		 */
 		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 			complete(&(us->notify));
 
@@ -610,7 +626,8 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 				le16_to_cpu(dev->descriptor.idProduct),
 				us->fflags);
 
-	/* Log a message if a non-generic unusual_dev entry contains an
+	/*
+	 * Log a message if a non-generic unusual_dev entry contains an
 	 * unnecessary subclass or protocol override.  This may stimulate
 	 * reports from users that will help us remove unneeded entries
 	 * from the unusual_devs.h table.
@@ -782,8 +799,10 @@ static int usb_stor_acquire_resources(struct us_data *us)
 		return -ENOMEM;
 	}
 
-	/* Just before we start our control thread, initialize
-	 * the device if it needs initialization */
+	/*
+	 * Just before we start our control thread, initialize
+	 * the device if it needs initialization
+	 */
 	if (us->unusual_dev->initFunction) {
 		p = us->unusual_dev->initFunction(us);
 		if (p)
@@ -805,7 +824,8 @@ static int usb_stor_acquire_resources(struct us_data *us)
 /* Release all our dynamic resources */
 static void usb_stor_release_resources(struct us_data *us)
 {
-	/* Tell the control thread to exit.  The SCSI host must
+	/*
+	 * Tell the control thread to exit.  The SCSI host must
 	 * already have been removed and the DISCONNECTING flag set
 	 * so that we won't accept any more commands.
 	 */
@@ -836,7 +856,8 @@ static void dissociate_dev(struct us_data *us)
 	usb_set_intfdata(us->pusb_intf, NULL);
 }
 
-/* First stage of disconnect processing: stop SCSI scanning,
+/*
+ * First stage of disconnect processing: stop SCSI scanning,
  * remove the host, and stop accepting new commands
  */
 static void quiesce_and_remove_host(struct us_data *us)
@@ -849,7 +870,8 @@ static void quiesce_and_remove_host(struct us_data *us)
 		wake_up(&us->delay_wait);
 	}
 
-	/* Prevent SCSI scanning (if it hasn't started yet)
+	/*
+	 * Prevent SCSI scanning (if it hasn't started yet)
 	 * or wait for the SCSI-scanning routine to stop.
 	 */
 	cancel_delayed_work_sync(&us->scan_dwork);
@@ -858,12 +880,14 @@ static void quiesce_and_remove_host(struct us_data *us)
 	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
 		usb_autopm_put_interface_no_suspend(us->pusb_intf);
 
-	/* Removing the host will perform an orderly shutdown: caches
+	/*
+	 * Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
 	 */
 	scsi_remove_host(host);
 
-	/* Prevent any new commands from being accepted and cut short
+	/*
+	 * Prevent any new commands from being accepted and cut short
 	 * reset delays.
 	 */
 	scsi_lock(host);
@@ -878,8 +902,10 @@ static void release_everything(struct us_data *us)
 	usb_stor_release_resources(us);
 	dissociate_dev(us);
 
-	/* Drop our reference to the host; the SCSI core will free it
-	 * (and "us" along with it) when the refcount becomes 0. */
+	/*
+	 * Drop our reference to the host; the SCSI core will free it
+	 * (and "us" along with it) when the refcount becomes 0.
+	 */
 	scsi_host_put(us_to_host(us));
 }
 
@@ -900,7 +926,8 @@ static void usb_stor_scan_dwork(struct work_struct *work)
 		us->max_lun = usb_stor_Bulk_max_lun(us);
 		/*
 		 * Allow proper scanning of devices that present more than 8 LUNs
-		 * While not affecting other devices that may need the previous behavior
+		 * While not affecting other devices that may need the previous
+		 * behavior
 		 */
 		if (us->max_lun >= 8)
 			us_to_host(us)->max_lun = us->max_lun+1;
@@ -975,7 +1002,8 @@ int usb_stor_probe1(struct us_data **pus,
 	get_transport(us);
 	get_protocol(us);
 
-	/* Give the caller a chance to fill in specialized transport
+	/*
+	 * Give the caller a chance to fill in specialized transport
 	 * or protocol settings.
 	 */
 	return 0;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index da0ad3241728..8fae28b40bb4 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage compliant devices
+/*
+ * Driver for USB Mass Storage compliant devices
  * Main Header File
  *
  * Current development and maintenance by:
@@ -100,7 +101,8 @@ typedef void (*pm_hook)(struct us_data *, int);	/* power management hook */
 
 /* we allocate one of these for every device that we remember */
 struct us_data {
-	/* The device we're working with
+	/*
+	 * The device we're working with
 	 * It's important to note:
 	 *    (o) you must hold dev_mutex to change pusb_dev
 	 */
@@ -125,7 +127,7 @@ struct us_data {
 	u8			max_lun;
 
 	u8			ifnum;		 /* interface number   */
-	u8			ep_bInterval;	 /* interrupt interval */ 
+	u8			ep_bInterval;	 /* interrupt interval */
 
 	/* function pointers for this device */
 	trans_cmnd		transport;	 /* transport function	   */
@@ -175,8 +177,10 @@ static inline struct us_data *host_to_us(struct Scsi_Host *host) {
 extern void fill_inquiry_response(struct us_data *us,
 	unsigned char *data, unsigned int data_len);
 
-/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
- * single queue element srb for write access */
+/*
+ * The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access
+ */
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
index 5ef8ce74aae4..499669bcf700 100644
--- a/drivers/usb/storage/usual-tables.c
+++ b/drivers/usb/storage/usual-tables.c
@@ -1,4 +1,5 @@
-/* Driver for USB Mass Storage devices
+/*
+ * Driver for USB Mass Storage devices
  * Usual Tables File for usb-storage and libusual
  *
  * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)