diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/storage | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/usb/storage')
31 files changed, 12959 insertions, 0 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig new file mode 100644 index 000000000000..f1f1c0608c22 --- /dev/null +++ b/drivers/usb/storage/Kconfig @@ -0,0 +1,113 @@ +# +# USB Storage driver configuration +# + +comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information" + depends on USB + +config USB_STORAGE + tristate "USB Mass Storage support" + depends on USB + select SCSI + ---help--- + Say Y here if you want to connect USB mass storage devices to your + computer's USB port. This is the driver you need for USB + floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, + USB flash devices, and memory sticks, along with + similar devices. This driver may also be used for some cameras + and card readers. + + This option 'selects' (turns on, enables) 'SCSI', but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called usb-storage. + +config USB_STORAGE_DEBUG + bool "USB Mass Storage verbose debug" + depends on USB_STORAGE + help + Say Y here in order to have the USB Mass Storage code generate + verbose debugging messages. + +config USB_STORAGE_DATAFAB + bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Support for certain Datafab CompactFlash readers. + Datafab has a web page at <http://www.datafabusa.com/>. + +config USB_STORAGE_FREECOM + bool "Freecom USB/ATAPI Bridge support" + depends on USB_STORAGE + help + Support for the Freecom USB to IDE/ATAPI adaptor. + Freecom has a web page at <http://www.freecom.de/>. + +config USB_STORAGE_ISD200 + bool "ISD-200 USB/ATA Bridge support" + depends on USB_STORAGE && BLK_DEV_IDE + ---help--- + Say Y here if you want to use USB Mass Store devices based + on the In-Systems Design ISD-200 USB/ATA bridge. + + Some of the products that use this chip are: + + - Archos Jukebox 6000 + - ISD SmartCable for Storage + - Taiwan Skymaster CD530U/DEL-0241 IDE bridge + - Sony CRX10U CD-R/RW drive + - CyQ've CQ8060A CDRW drive + - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + +config USB_STORAGE_DPCM + bool "Microtech/ZiO! CompactFlash/SmartMedia support" + depends on USB_STORAGE + help + Say Y here to support the Microtech/ZiO! CompactFlash reader. + There is a web page at <http://www.ziocorp.com/products/>. + +config USB_STORAGE_USBAT + bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support storage devices + based on the SCM/Shuttle USBAT/USBAT02 processors. + + Devices reported to work with this driver include: + - CompactFlash reader included with Kodak DC3800 camera + - Dane-Elec Zmate CompactFlash reader + - Delkin Efilm reader2 + - HP 8200e/8210e/8230e CD-Writer Plus drives + - I-JAM JS-50U + - Jessops CompactFlash JESDCFRU BLACK + - Kingston Technology PCREAD-USB/CF + - Maxell UA4 CompactFlash reader + - Memorex UCF-100 + - Microtech ZiO! ICS-45 CF2 + - RCA LYRA MP3 portable + - Sandisk ImageMate SDDR-05b + +config USB_STORAGE_SDDR09 + bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Sandisk SDDR-09 + SmartMedia reader in the USB Mass Storage driver. + Also works for the Microtech Zio! SmartMedia reader. + +config USB_STORAGE_SDDR55 + bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Sandisk SDDR-55 + SmartMedia reader in the USB Mass Storage driver. + +config USB_STORAGE_JUMPSHOT + bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Lexar Jumpshot + USB CompactFlash reader. + diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile new file mode 100644 index 000000000000..56652ccc2881 --- /dev/null +++ b/drivers/usb/storage/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for the USB Mass Storage device drivers. +# +# 15 Aug 2000, Christoph Hellwig <hch@infradead.org> +# Rewritten to use lists instead of if-statements. +# + +EXTRA_CFLAGS := -Idrivers/scsi + +obj-$(CONFIG_USB_STORAGE) += usb-storage.o + +usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o +usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o +usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09) += sddr09.o +usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o +usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o +usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o +usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o +usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o +usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o + +usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ + initializers.o $(usb-storage-obj-y) diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c new file mode 100644 index 000000000000..54e3e6c7ecd8 --- /dev/null +++ b/drivers/usb/storage/datafab.c @@ -0,0 +1,669 @@ +/* Driver for Datafab USB Compact Flash reader + * + * $Id: datafab.c,v 1.7 2002/02/25 00:40:13 mdharm Exp $ + * + * datafab driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) + * + * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver + * which I used as a template for this driver. + * + * Some bugfixes and scatter-gather code by Gregory P. Smith + * (greg-usb@electricrain.com) + * + * Fix for media change by Joerg Schneider (js@joergschneider.com) + * + * Other contributors: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This driver attempts to support USB CompactFlash reader/writer devices + * based on Datafab USB-to-ATA chips. It was specifically developed for the + * Datafab MDCFE-B USB CompactFlash reader but has since been found to work + * with a variety of Datafab-based devices from a number of manufacturers. + * I've received a report of this driver working with a Datafab-based + * SmartMedia device though please be aware that I'm personally unable to + * test SmartMedia support. + * + * This driver supports reading and writing. If you're truly paranoid, + * however, you can force the driver into a write-protected state by setting + * the WP enable bits in datafab_handle_mode_sense(). See the comments + * in that routine. + */ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "datafab.h" + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info); + + +static inline int +datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("datafab_bulk_read: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, len, NULL); +} + + +static inline int +datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("datafab_bulk_write: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + data, len, NULL); +} + + +static int datafab_read_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_idx = 0, sg_offset = 0; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x20; + command[7] = 0x01; + + // send the read command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_write_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *reply = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_idx = 0, sg_offset = 0; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, FROM_XFER_BUF); + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x30; + command[7] = 0x02; + + // send the command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // send the data + result = datafab_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, reply, 2); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + if (reply[0] != 0x50 && reply[1] != 0) { + US_DEBUGP("datafab_write_data: Gah! " + "write return code: %02x %02x\n", + reply[0], reply[1]); + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info) +{ + // Dual-slot readers can be thought of as dual-LUN devices. + // We need to determine which card slot is being used. + // We'll send an IDENTIFY DEVICE command and see which LUN responds... + // + // There might be a better way of doing this? + + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *buf; + int count = 0, rc; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + memcpy(command, scommand, 8); + buf = kmalloc(512, GFP_NOIO); + if (!buf) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("datafab_determine_lun: locating...\n"); + + // we'll try 3 times before giving up... + // + while (count++ < 3) { + command[5] = 0xa0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 0; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + command[5] = 0xb0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 1; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + msleep(20); + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(buf); + return rc; +} + +static int datafab_id_device(struct us_data *us, + struct datafab_info *info) +{ + // this is a variation of the ATA "IDENTIFY DEVICE" command...according + // to the ATA spec, 'Sector Count' isn't used but the Windows driver + // sets this bit so we do too... + // + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *reply; + int rc; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + rc = datafab_determine_lun(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + } + + memcpy(command, scommand, 8); + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + command[5] += (info->lun << 4); + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // we'll go ahead and extract the media capacity while we're here... + // + rc = datafab_bulk_read(us, reply, 512); + if (rc == USB_STOR_XFER_GOOD) { + // capacity is at word offset 57-58 + // + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(reply); + return rc; +} + + +static int datafab_handle_mode_sense(struct us_data *us, + struct scsi_cmnd * srb, + int sense_6) +{ + static unsigned char rw_err_page[12] = { + 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 + }; + static unsigned char cache_page[12] = { + 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char rbac_page[12] = { + 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char timer_page[8] = { + 0x1C, 0x6, 0, 0, 0, 0 + }; + unsigned char pc, page_code; + unsigned int i = 0; + struct datafab_info *info = (struct datafab_info *) (us->extra); + unsigned char *ptr = us->iobuf; + + // most of this stuff is just a hack to get things working. the + // datafab reader doesn't present a SCSI interface so we + // fudge the SCSI commands... + // + + pc = srb->cmnd[2] >> 6; + page_code = srb->cmnd[2] & 0x3F; + + switch (pc) { + case 0x0: + US_DEBUGP("datafab_handle_mode_sense: Current values\n"); + break; + case 0x1: + US_DEBUGP("datafab_handle_mode_sense: Changeable values\n"); + break; + case 0x2: + US_DEBUGP("datafab_handle_mode_sense: Default values\n"); + break; + case 0x3: + US_DEBUGP("datafab_handle_mode_sense: Saves values\n"); + break; + } + + memset(ptr, 0, 8); + if (sense_6) { + ptr[2] = 0x00; // WP enable: 0x80 + i = 4; + } else { + ptr[3] = 0x00; // WP enable: 0x80 + i = 8; + } + + switch (page_code) { + default: + // vendor-specific mode + info->sense_key = 0x05; + info->sense_asc = 0x24; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + + case 0x1: + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + + case 0x8: + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + break; + + case 0x1B: + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + break; + + case 0x1C: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + break; + + case 0x3F: // retrieve all pages + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + } + + if (sense_6) + ptr[0] = i - 1; + else + ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); + usb_stor_set_xfer_buf(ptr, i, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + +static void datafab_info_destructor(void *extra) +{ + // this routine is a placeholder... + // currently, we don't allocate any extra memory so we're okay +} + + +// Transport for the Datafab MDCFE-B +// +int datafab_transport(struct scsi_cmnd * srb, struct us_data *us) +{ + struct datafab_info *info; + int rc; + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_reply[8] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (!us->extra) { + us->extra = kmalloc(sizeof(struct datafab_info), GFP_NOIO); + if (!us->extra) { + US_DEBUGP("datafab_transport: Gah! " + "Can't allocate storage for Datafab info struct!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + memset(us->extra, 0, sizeof(struct datafab_info)); + us->extra_destructor = datafab_info_destructor; + ((struct datafab_info *)us->extra)->lun = -1; + } + + info = (struct datafab_info *) (us->extra); + + if (srb->cmnd[0] == INQUIRY) { + US_DEBUGP("datafab_transport: INQUIRY. Returning bogus response"); + memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + rc = datafab_id_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("datafab_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // we need the last sector, not the number of sectors + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + US_DEBUGP("datafab_transport: Gah! MODE_SELECT_10.\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + // don't bother implementing READ_6 or WRITE_6. + // + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("datafab_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // we'll probably never see a READ_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("datafab_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("datafab_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // we'll probably never see a WRITE_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("datafab_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + US_DEBUGP("datafab_transport: TEST_UNIT_READY.\n"); + return datafab_id_device(us, info); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("datafab_transport: REQUEST_SENSE. Returning faked response\n"); + + // this response is pretty bogus right now. eventually if necessary + // we can set the correct sense data. so far though it hasn't been + // necessary + // + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE) { + US_DEBUGP("datafab_transport: MODE_SENSE_6 detected\n"); + return datafab_handle_mode_sense(us, srb, 1); + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + US_DEBUGP("datafab_transport: MODE_SENSE_10 detected\n"); + return datafab_handle_mode_sense(us, srb, 0); + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from + // popping the media out of the device (no locking doors, etc) + // + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + /* this is used by sd.c'check_scsidisk_media_change to detect + media change */ + US_DEBUGP("datafab_transport: START_STOP.\n"); + /* the first datafab_id_device after a media change returns + an error (determined experimentally) */ + rc = datafab_id_device(us, info); + if (rc == USB_STOR_TRANSPORT_GOOD) { + info->sense_key = NO_SENSE; + srb->result = SUCCESS; + } else { + info->sense_key = UNIT_ATTENTION; + srb->result = SAM_STAT_CHECK_CONDITION; + } + return rc; + } + + US_DEBUGP("datafab_transport: Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h new file mode 100644 index 000000000000..32e3f271e582 --- /dev/null +++ b/drivers/usb/storage/datafab.h @@ -0,0 +1,40 @@ +/* Driver for Datafab MDCFE-B USB Compact Flash reader + * Header File + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) + * + * See datafab.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_DATAFAB_MDCFE_B_H +#define _USB_DATAFAB_MDCFE_B_H + +extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us); + +struct datafab_info { + unsigned long sectors; // total sector count + unsigned long ssize; // sector size in bytes + signed char lun; // used for dual-slot readers + + // the following aren't used yet + unsigned char sense_key; + unsigned long sense_asc; // additional sense code + unsigned long sense_ascq; // additional sense code qualifier +}; + +#endif diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c new file mode 100644 index 000000000000..d76483706bc9 --- /dev/null +++ b/drivers/usb/storage/debug.c @@ -0,0 +1,177 @@ +/* Driver for USB Mass Storage compliant devices + * Debugging Functions Source Code File + * + * $Id: debug.c,v 1.9 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/cdrom.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "debug.h" +#include "scsi.h" + + +void usb_stor_show_command(struct scsi_cmnd *srb) +{ + char *what = NULL; + int i; + + switch (srb->cmnd[0]) { + case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break; + case REZERO_UNIT: what = "REZERO_UNIT"; break; + case REQUEST_SENSE: what = "REQUEST_SENSE"; break; + case FORMAT_UNIT: what = "FORMAT_UNIT"; break; + case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break; + case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break; + case READ_6: what = "READ_6"; break; + case WRITE_6: what = "WRITE_6"; break; + case SEEK_6: what = "SEEK_6"; break; + case READ_REVERSE: what = "READ_REVERSE"; break; + case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break; + case SPACE: what = "SPACE"; break; + case INQUIRY: what = "INQUIRY"; break; + case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break; + case MODE_SELECT: what = "MODE_SELECT"; break; + case RESERVE: what = "RESERVE"; break; + case RELEASE: what = "RELEASE"; break; + case COPY: what = "COPY"; break; + case ERASE: what = "ERASE"; break; + case MODE_SENSE: what = "MODE_SENSE"; break; + case START_STOP: what = "START_STOP"; break; + case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break; + case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break; + case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break; + case SET_WINDOW: what = "SET_WINDOW"; break; + case READ_CAPACITY: what = "READ_CAPACITY"; break; + case READ_10: what = "READ_10"; break; + case WRITE_10: what = "WRITE_10"; break; + case SEEK_10: what = "SEEK_10"; break; + case WRITE_VERIFY: what = "WRITE_VERIFY"; break; + case VERIFY: what = "VERIFY"; break; + case SEARCH_HIGH: what = "SEARCH_HIGH"; break; + case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break; + case SEARCH_LOW: what = "SEARCH_LOW"; break; + case SET_LIMITS: what = "SET_LIMITS"; break; + case READ_POSITION: what = "READ_POSITION"; break; + case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break; + case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break; + case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break; + case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break; + case COMPARE: what = "COMPARE"; break; + case COPY_VERIFY: what = "COPY_VERIFY"; break; + case WRITE_BUFFER: what = "WRITE_BUFFER"; break; + case READ_BUFFER: what = "READ_BUFFER"; break; + case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break; + case READ_LONG: what = "READ_LONG"; break; + case WRITE_LONG: what = "WRITE_LONG"; break; + case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break; + case WRITE_SAME: what = "WRITE_SAME"; break; + case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break; + case READ_TOC: what = "READ_TOC"; break; + case GPCMD_READ_HEADER: what = "READ HEADER"; break; + case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break; + case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break; + case GPCMD_GET_EVENT_STATUS_NOTIFICATION: + what = "GET EVENT/STATUS NOTIFICATION"; break; + case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break; + case LOG_SELECT: what = "LOG_SELECT"; break; + case LOG_SENSE: what = "LOG_SENSE"; break; + case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break; + case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break; + case GPCMD_READ_TRACK_RZONE_INFO: + what = "READ TRACK INFORMATION"; break; + case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break; + case GPCMD_SEND_OPC: what = "SEND OPC"; break; + case MODE_SELECT_10: what = "MODE_SELECT_10"; break; + case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break; + case 0x59: what = "READ MASTER CUE"; break; + case MODE_SENSE_10: what = "MODE_SENSE_10"; break; + case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break; + case 0x5C: what = "READ BUFFER CAPACITY"; break; + case 0x5D: what = "SEND CUE SHEET"; break; + case GPCMD_BLANK: what = "BLANK"; break; + case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break; + case READ_12: what = "READ_12"; break; + case WRITE_12: what = "WRITE_12"; break; + case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break; + case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break; + case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break; + case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break; + case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break; + case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break; + case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break; + case GPCMD_SCAN: what = "SCAN"; break; + case GPCMD_SET_SPEED: what = "SET CD SPEED"; break; + case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break; + case GPCMD_READ_CD: what = "READ CD"; break; + case 0xE1: what = "WRITE CONTINUE"; break; + case WRITE_LONG_2: what = "WRITE_LONG_2"; break; + default: what = "(unknown command)"; break; + } + US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len); + US_DEBUGP(""); + for (i = 0; i < srb->cmd_len && i < 16; i++) + US_DEBUGPX(" %02x", srb->cmnd[i]); + US_DEBUGPX("\n"); +} + +void usb_stor_show_sense( + unsigned char key, + unsigned char asc, + unsigned char ascq) { + + const char *what, *keystr; + + keystr = scsi_sense_key_string(key); + what = scsi_extd_sense_format(asc, ascq); + + if (keystr == NULL) + keystr = "(Unknown Key)"; + if (what == NULL) + what = "(unknown ASC/ASCQ)"; + + US_DEBUGP("%s: ", keystr); + US_DEBUGPX(what, ascq); + US_DEBUGPX("\n"); +} diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h new file mode 100644 index 000000000000..cd2096acc723 --- /dev/null +++ b/drivers/usb/storage/debug.h @@ -0,0 +1,65 @@ +/* Driver for USB Mass Storage compliant devices + * Debugging Functions Header File + * + * $Id: debug.h,v 1.6 2001/01/12 23:51:04 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _DEBUG_H_ +#define _DEBUG_H_ + +#include <linux/config.h> +#include <linux/kernel.h> + +#define USB_STORAGE "usb-storage: " + +#ifdef CONFIG_USB_STORAGE_DEBUG +void usb_stor_show_command(struct scsi_cmnd *srb); +void usb_stor_show_sense( unsigned char key, + unsigned char asc, unsigned char ascq ); +#define US_DEBUGP(x...) printk( KERN_DEBUG USB_STORAGE x ) +#define US_DEBUGPX(x...) printk( x ) +#define US_DEBUG(x) x +#else +#define US_DEBUGP(x...) +#define US_DEBUGPX(x...) +#define US_DEBUG(x) +#endif + +#endif diff --git a/drivers/usb/storage/dpcm.c b/drivers/usb/storage/dpcm.c new file mode 100644 index 000000000000..92b69e4c8047 --- /dev/null +++ b/drivers/usb/storage/dpcm.c @@ -0,0 +1,89 @@ +/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader + * + * $Id: dpcm.c,v 1.4 2001/06/11 02:54:25 mdharm Exp $ + * + * DPCM driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Brian Webb (webbb@earthlink.net) + * + * This device contains both a CompactFlash card reader, which + * uses the Control/Bulk w/o Interrupt protocol and + * a SmartMedia card reader that uses the same protocol + * as the SDDR09. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "dpcm.h" +#include "sddr09.h" + +/* + * Transport for the Microtech DPCM-USB + * + */ +int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int ret; + + if(srb == NULL) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun); + + switch(srb->device->lun) { + case 0: + + /* + * LUN 0 corresponds to the CompactFlash card reader. + */ + ret = usb_stor_CB_transport(srb, us); + break; + +#ifdef CONFIG_USB_STORAGE_SDDR09 + case 1: + + /* + * LUN 1 corresponds to the SmartMedia card reader. + */ + + /* + * Set the LUN to 0 (just in case). + */ + srb->device->lun = 0; us->srb->device->lun = 0; + ret = sddr09_transport(srb, us); + srb->device->lun = 1; us->srb->device->lun = 1; + break; + +#endif + + default: + US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->device->lun); + ret = USB_STOR_TRANSPORT_ERROR; + break; + } + return ret; +} diff --git a/drivers/usb/storage/dpcm.h b/drivers/usb/storage/dpcm.h new file mode 100644 index 000000000000..81b464cfcc1e --- /dev/null +++ b/drivers/usb/storage/dpcm.h @@ -0,0 +1,34 @@ +/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader + * + * $Id: dpcm.h,v 1.2 2000/08/25 00:13:51 mdharm Exp $ + * + * DPCM driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Brian Webb (webbb@earthlink.net) + * + * See dpcm.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _MICROTECH_DPCM_USB_H +#define _MICROTECH_DPCM_USB_H + +extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us); + +#endif diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c new file mode 100644 index 000000000000..30e96050fe0c --- /dev/null +++ b/drivers/usb/storage/freecom.c @@ -0,0 +1,488 @@ +/* Driver for Freecom USB/IDE adaptor + * + * $Id: freecom.c,v 1.22 2002/04/22 03:39:43 mdharm Exp $ + * + * Freecom v0.1: + * + * First release + * + * Current development and maintenance by: + * (C) 2000 David Brown <usb-storage@davidb.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * This driver was developed with information provided in FREECOM's USB + * Programmers Reference Guide. For further information contact Freecom + * (http://www.freecom.de/) + */ + +#include <linux/config.h> +#include <linux/hdreg.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "freecom.h" + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void pdump (void *, int); +#endif + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define DRQ_STAT 0x08 + +/* All of the outgoing packets are 64 bytes long. */ +struct freecom_cb_wrap { + u8 Type; /* Command type. */ + u8 Timeout; /* Timeout in seconds. */ + u8 Atapi[12]; /* An ATAPI packet. */ + u8 Filler[50]; /* Padding Data. */ +}; + +struct freecom_xfer_wrap { + u8 Type; /* Command type. */ + u8 Timeout; /* Timeout in seconds. */ + __le32 Count; /* Number of bytes to transfer. */ + u8 Pad[58]; +} __attribute__ ((packed)); + +struct freecom_ide_out { + u8 Type; /* Type + IDE register. */ + u8 Pad; + __le16 Value; /* Value to write. */ + u8 Pad2[60]; +}; + +struct freecom_ide_in { + u8 Type; /* Type | IDE register. */ + u8 Pad[63]; +}; + +struct freecom_status { + u8 Status; + u8 Reason; + __le16 Count; + u8 Pad[60]; +}; + +/* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide + * register. */ +#define FCM_INT_STATUS 0x02 /* INDEX_STAT */ +#define FCM_STATUS_BUSY 0x80 + +/* These are the packet types. The low bit indicates that this command + * should wait for an interrupt. */ +#define FCM_PACKET_ATAPI 0x21 +#define FCM_PACKET_STATUS 0x20 + +/* Receive data from the IDE interface. The ATAPI packet has already + * waited, so the data should be immediately available. */ +#define FCM_PACKET_INPUT 0x81 + +/* Send data to the IDE interface. */ +#define FCM_PACKET_OUTPUT 0x01 + +/* Write a value to an ide register. Or the ide register to write after + * munging the address a bit. */ +#define FCM_PACKET_IDE_WRITE 0x40 +#define FCM_PACKET_IDE_READ 0xC0 + +/* All packets (except for status) are 64 bytes long. */ +#define FCM_PACKET_LENGTH 64 +#define FCM_STATUS_PACKET_LENGTH 4 + +static int +freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, + unsigned int ipipe, unsigned int opipe, int count) +{ + struct freecom_xfer_wrap *fxfr = + (struct freecom_xfer_wrap *) us->iobuf; + int result; + + fxfr->Type = FCM_PACKET_INPUT | 0x00; + fxfr->Timeout = 0; /* Short timeout for debugging. */ + fxfr->Count = cpu_to_le32 (count); + memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); + + US_DEBUGP("Read data Freecom! (c=%d)\n", count); + + /* Issue the transfer command. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, + FCM_PACKET_LENGTH, NULL); + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP ("Freecom readdata transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Now transfer all of our blocks. */ + US_DEBUGP("Start of read\n"); + result = usb_stor_bulk_transfer_sg(us, ipipe, srb->request_buffer, + count, srb->use_sg, &srb->resid); + US_DEBUGP("freecom_readdata done!\n"); + + if (result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + return USB_STOR_TRANSPORT_GOOD; +} + +static int +freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, + int unsigned ipipe, unsigned int opipe, int count) +{ + struct freecom_xfer_wrap *fxfr = + (struct freecom_xfer_wrap *) us->iobuf; + int result; + + fxfr->Type = FCM_PACKET_OUTPUT | 0x00; + fxfr->Timeout = 0; /* Short timeout for debugging. */ + fxfr->Count = cpu_to_le32 (count); + memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); + + US_DEBUGP("Write data Freecom! (c=%d)\n", count); + + /* Issue the transfer command. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, + FCM_PACKET_LENGTH, NULL); + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP ("Freecom writedata transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Now transfer all of our blocks. */ + US_DEBUGP("Start of write\n"); + result = usb_stor_bulk_transfer_sg(us, opipe, srb->request_buffer, + count, srb->use_sg, &srb->resid); + + US_DEBUGP("freecom_writedata done!\n"); + if (result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Transport for the Freecom USB/IDE adaptor. + * + */ +int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct freecom_cb_wrap *fcb; + struct freecom_status *fst; + unsigned int ipipe, opipe; /* We need both pipes. */ + int result; + unsigned int partial; + int length; + + fcb = (struct freecom_cb_wrap *) us->iobuf; + fst = (struct freecom_status *) us->iobuf; + + US_DEBUGP("Freecom TRANSPORT STARTED\n"); + + /* Get handles for both transports. */ + opipe = us->send_bulk_pipe; + ipipe = us->recv_bulk_pipe; + + /* The ATAPI Command always goes out first. */ + fcb->Type = FCM_PACKET_ATAPI | 0x00; + fcb->Timeout = 0; + memcpy (fcb->Atapi, srb->cmnd, 12); + memset (fcb->Filler, 0, sizeof (fcb->Filler)); + + US_DEBUG(pdump (srb->cmnd, 12)); + + /* Send it out. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fcb, + FCM_PACKET_LENGTH, NULL); + + /* The Freecom device will only fail if there is something wrong in + * USB land. It returns the status in its own registers, which + * come back in the bulk pipe. */ + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP ("freecom transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* There are times we can optimize out this status read, but it + * doesn't hurt us to always do it now. */ + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_STATUS_PACKET_LENGTH, &partial); + US_DEBUGP("foo Status result %d %u\n", result, partial); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUG(pdump ((void *) fst, partial)); + + /* The firmware will time-out commands after 20 seconds. Some commands + * can legitimately take longer than this, so we use a different + * command that only waits for the interrupt and then sends status, + * without having to send a new ATAPI command to the device. + * + * NOTE: There is some indication that a data transfer after a timeout + * may not work, but that is a condition that should never happen. + */ + while (fst->Status & FCM_STATUS_BUSY) { + US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n"); + US_DEBUGP("fst->Status is %x\n", fst->Status); + + /* Get the status again */ + fcb->Type = FCM_PACKET_STATUS; + fcb->Timeout = 0; + memset (fcb->Atapi, 0, sizeof(fcb->Atapi)); + memset (fcb->Filler, 0, sizeof (fcb->Filler)); + + /* Send it out. */ + result = usb_stor_bulk_transfer_buf (us, opipe, fcb, + FCM_PACKET_LENGTH, NULL); + + /* The Freecom device will only fail if there is something + * wrong in USB land. It returns the status in its own + * registers, which come back in the bulk pipe. + */ + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP ("freecom transport error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* get the data */ + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_STATUS_PACKET_LENGTH, &partial); + + US_DEBUGP("bar Status result %d %u\n", result, partial); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUG(pdump ((void *) fst, partial)); + } + + if (partial != 4) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & 1) != 0) { + US_DEBUGP("operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + + /* The device might not have as much data available as we + * requested. If you ask for more than the device has, this reads + * and such will hang. */ + US_DEBUGP("Device indicates that it has %d bytes available\n", + le16_to_cpu (fst->Count)); + US_DEBUGP("SCSI requested %d\n", srb->request_bufflen); + + /* Find the length we desire to read. */ + switch (srb->cmnd[0]) { + case INQUIRY: + case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ + case MODE_SENSE: + case MODE_SENSE_10: + length = le16_to_cpu(fst->Count); + break; + default: + length = srb->request_bufflen; + } + + /* verify that this amount is legal */ + if (length > srb->request_bufflen) { + length = srb->request_bufflen; + US_DEBUGP("Truncating request to match buffer length: %d\n", length); + } + + /* What we do now depends on what direction the data is supposed to + * move in. */ + + switch (us->srb->sc_data_direction) { + case DMA_FROM_DEVICE: + /* catch bogus "read 0 length" case */ + if (!length) + break; + /* Make sure that the status indicates that the device + * wants data as well. */ + if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) { + US_DEBUGP("SCSI wants data, drive doesn't have any\n"); + return USB_STOR_TRANSPORT_FAILED; + } + result = freecom_readdata (srb, us, ipipe, opipe, length); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + US_DEBUGP("FCM: Waiting for status\n"); + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_PACKET_LENGTH, &partial); + US_DEBUG(pdump ((void *) fst, partial)); + + if (partial != 4 || result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & ERR_STAT) != 0) { + US_DEBUGP("operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + if ((fst->Reason & 3) != 3) { + US_DEBUGP("Drive seems still hungry\n"); + return USB_STOR_TRANSPORT_FAILED; + } + US_DEBUGP("Transfer happy\n"); + break; + + case DMA_TO_DEVICE: + /* catch bogus "write 0 length" case */ + if (!length) + break; + /* Make sure the status indicates that the device wants to + * send us data. */ + /* !!IMPLEMENT!! */ + result = freecom_writedata (srb, us, ipipe, opipe, length); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + US_DEBUGP("FCM: Waiting for status\n"); + result = usb_stor_bulk_transfer_buf (us, ipipe, fst, + FCM_PACKET_LENGTH, &partial); + + if (partial != 4 || result > USB_STOR_XFER_SHORT) + return USB_STOR_TRANSPORT_ERROR; + if ((fst->Status & ERR_STAT) != 0) { + US_DEBUGP("operation failed\n"); + return USB_STOR_TRANSPORT_FAILED; + } + if ((fst->Reason & 3) != 3) { + US_DEBUGP("Drive seems still hungry\n"); + return USB_STOR_TRANSPORT_FAILED; + } + + US_DEBUGP("Transfer happy\n"); + break; + + + case DMA_NONE: + /* Easy, do nothing. */ + break; + + default: + /* should never hit here -- filtered in usb.c */ + US_DEBUGP ("freecom unimplemented direction: %d\n", + us->srb->sc_data_direction); + // Return fail, SCSI seems to handle this better. + return USB_STOR_TRANSPORT_FAILED; + break; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +int +freecom_init (struct us_data *us) +{ + int result; + char *buffer = us->iobuf; + + /* The DMA-mapped I/O buffer is 64 bytes long, just right for + * all our packets. No need to allocate any extra buffer space. + */ + + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ); + buffer[32] = '\0'; + US_DEBUGP("String returned from FC init is: %s\n", buffer); + + /* Special thanks to the people at Freecom for providing me with + * this "magic sequence", which they use in their Windows and MacOS + * drivers to make sure that all the attached perhiperals are + * properly reset. + */ + + /* send reset */ + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ); + US_DEBUGP("result from activate reset is %d\n", result); + + /* wait 250ms */ + mdelay(250); + + /* clear reset */ + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ); + US_DEBUGP("result from clear reset is %d\n", result); + + /* wait 3 seconds */ + mdelay(3 * 1000); + + return USB_STOR_TRANSPORT_GOOD; +} + +int usb_stor_freecom_reset(struct us_data *us) +{ + printk (KERN_CRIT "freecom reset called\n"); + + /* We don't really have this feature. */ + return FAILED; +} + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void pdump (void *ibuffer, int length) +{ + static char line[80]; + int offset = 0; + unsigned char *buffer = (unsigned char *) ibuffer; + int i, j; + int from, base; + + offset = 0; + for (i = 0; i < length; i++) { + if ((i & 15) == 0) { + if (i > 0) { + offset += sprintf (line+offset, " - "); + for (j = i - 16; j < i; j++) { + if (buffer[j] >= 32 && buffer[j] <= 126) + line[offset++] = buffer[j]; + else + line[offset++] = '.'; + } + line[offset] = 0; + US_DEBUGP("%s\n", line); + offset = 0; + } + offset += sprintf (line+offset, "%08x:", i); + } + else if ((i & 7) == 0) { + offset += sprintf (line+offset, " -"); + } + offset += sprintf (line+offset, " %02x", buffer[i] & 0xff); + } + + /* Add the last "chunk" of data. */ + from = (length - 1) % 16; + base = ((length - 1) / 16) * 16; + + for (i = from + 1; i < 16; i++) + offset += sprintf (line+offset, " "); + if (from < 8) + offset += sprintf (line+offset, " "); + offset += sprintf (line+offset, " - "); + + for (i = 0; i <= from; i++) { + if (buffer[base+i] >= 32 && buffer[base+i] <= 126) + line[offset++] = buffer[base+i]; + else + line[offset++] = '.'; + } + line[offset] = 0; + US_DEBUGP("%s\n", line); + offset = 0; +} +#endif + diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/freecom.h new file mode 100644 index 000000000000..1b012d62d0a8 --- /dev/null +++ b/drivers/usb/storage/freecom.h @@ -0,0 +1,36 @@ +/* Driver for Freecom USB/IDE adaptor + * + * $Id: freecom.h,v 1.4 2000/08/29 14:49:15 dlbrown Exp $ + * + * Freecom v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 David Brown <usb-storage@davidb.org> + * + * See freecom.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _FREECOM_USB_H +#define _FREECOM_USB_H + +extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us); +extern int usb_stor_freecom_reset(struct us_data *us); +extern int freecom_init (struct us_data *us); + +#endif diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c new file mode 100644 index 000000000000..5b06f9240d05 --- /dev/null +++ b/drivers/usb/storage/initializers.c @@ -0,0 +1,93 @@ +/* Special Initializers for certain USB Mass Storage devices + * + * $Id: initializers.c,v 1.2 2000/09/06 22:35:57 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/sched.h> +#include <linux/errno.h> + +#include "usb.h" +#include "initializers.h" +#include "debug.h" +#include "transport.h" + +/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target + * mode */ +int usb_stor_euscsi_init(struct us_data *us) +{ + int result; + + US_DEBUGP("Attempting to init eUSCSI bridge...\n"); + us->iobuf[0] = 0x1; + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, + 0x01, 0x0, us->iobuf, 0x1, 5*HZ); + US_DEBUGP("-- result is %d\n", result); + + return 0; +} + +/* This function is required to activate all four slots on the UCR-61S2B + * flash reader */ +int usb_stor_ucr61s2b_init(struct us_data *us) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf; + int res, partial; + static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS"; + + US_DEBUGP("Sending UCR-61S2B initialization packet...\n"); + + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->Tag = 0; + bcb->DataTransferLength = cpu_to_le32(0); + bcb->Flags = bcb->Lun = 0; + bcb->Length = sizeof(init_string) - 1; + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, init_string, sizeof(init_string) - 1); + + res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, + US_BULK_CB_WRAP_LEN, &partial); + if(res) + return res; + + US_DEBUGP("Getting status packet...\n"); + res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, + US_BULK_CS_WRAP_LEN, &partial); + + return (res ? -1 : 0); +} diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h new file mode 100644 index 000000000000..7372386f33d5 --- /dev/null +++ b/drivers/usb/storage/initializers.h @@ -0,0 +1,54 @@ +/* Header file for Special Initializers for certain USB Mass Storage devices + * + * $Id: initializers.h,v 1.1 2000/08/29 23:07:02 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include "usb.h" +#include "transport.h" + +/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target + * mode */ +int usb_stor_euscsi_init(struct us_data *us); + +#ifdef CONFIG_USB_STORAGE_SDDR09 +int sddr09_init(struct us_data *us); +#endif + +/* This function is required to activate all four slots on the UCR-61S2B + * flash reader */ +int usb_stor_ucr61s2b_init(struct us_data *us); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c new file mode 100644 index 000000000000..ecb328aa9ea1 --- /dev/null +++ b/drivers/usb/storage/isd200.c @@ -0,0 +1,1442 @@ +/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC + * + * $Id: isd200.c,v 1.16 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance: + * (C) 2001-2002 Björn Stenberg (bjorn@haxx.se) + * + * Developed with the assistance of: + * (C) 2002 Alan Stern <stern@rowland.org> + * + * Initial work: + * (C) 2000 In-System Design, Inc. (support@in-system.com) + * + * The ISD200 ASIC does not natively support ATA devices. The chip + * does implement an interface, the ATA Command Block (ATACB) which provides + * a means of passing ATA commands and ATA register accesses to a device. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History: + * + * 2002-10-19: Removed the specialized transfer routines. + * (Alan Stern <stern@rowland.harvard.edu>) + * 2001-02-24: Removed lots of duplicate code and simplified the structure. + * (bjorn@haxx.se) + * 2002-01-16: Fixed endianness bug so it works on the ppc arch. + * (Luc Saillard <luc@saillard.org>) + * 2002-01-17: All bitfields removed. + * (bjorn@haxx.se) + */ + + +/* Include files */ + +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/hdreg.h> +#include <linux/ide.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "scsiglue.h" +#include "isd200.h" + + +/* Timeout defines (in Seconds) */ + +#define ISD200_ENUM_BSY_TIMEOUT 35 +#define ISD200_ENUM_DETECT_TIMEOUT 30 +#define ISD200_DEFAULT_TIMEOUT 30 + +/* device flags */ +#define DF_ATA_DEVICE 0x0001 +#define DF_MEDIA_STATUS_ENABLED 0x0002 +#define DF_REMOVABLE_MEDIA 0x0004 + +/* capability bit definitions */ +#define CAPABILITY_DMA 0x01 +#define CAPABILITY_LBA 0x02 + +/* command_setX bit definitions */ +#define COMMANDSET_REMOVABLE 0x02 +#define COMMANDSET_MEDIA_STATUS 0x10 + +/* ATA Vendor Specific defines */ +#define ATA_ADDRESS_DEVHEAD_STD 0xa0 +#define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40 +#define ATA_ADDRESS_DEVHEAD_SLAVE 0x10 + +/* Action Select bits */ +#define ACTION_SELECT_0 0x01 +#define ACTION_SELECT_1 0x02 +#define ACTION_SELECT_2 0x04 +#define ACTION_SELECT_3 0x08 +#define ACTION_SELECT_4 0x10 +#define ACTION_SELECT_5 0x20 +#define ACTION_SELECT_6 0x40 +#define ACTION_SELECT_7 0x80 + +/* Register Select bits */ +#define REG_ALTERNATE_STATUS 0x01 +#define REG_DEVICE_CONTROL 0x01 +#define REG_ERROR 0x02 +#define REG_FEATURES 0x02 +#define REG_SECTOR_COUNT 0x04 +#define REG_SECTOR_NUMBER 0x08 +#define REG_CYLINDER_LOW 0x10 +#define REG_CYLINDER_HIGH 0x20 +#define REG_DEVICE_HEAD 0x40 +#define REG_STATUS 0x80 +#define REG_COMMAND 0x80 + +/* ATA error definitions not in <linux/hdreg.h> */ +#define ATA_ERROR_MEDIA_CHANGE 0x20 + +/* ATA command definitions not in <linux/hdreg.h> */ +#define ATA_COMMAND_GET_MEDIA_STATUS 0xDA +#define ATA_COMMAND_MEDIA_EJECT 0xED + +/* ATA drive control definitions */ +#define ATA_DC_DISABLE_INTERRUPTS 0x02 +#define ATA_DC_RESET_CONTROLLER 0x04 +#define ATA_DC_REENABLE_CONTROLLER 0x00 + +/* + * General purpose return codes + */ + +#define ISD200_ERROR -1 +#define ISD200_GOOD 0 + +/* + * Transport return codes + */ + +#define ISD200_TRANSPORT_GOOD 0 /* Transport good, command good */ +#define ISD200_TRANSPORT_FAILED 1 /* Transport good, command failed */ +#define ISD200_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */ + +/* driver action codes */ +#define ACTION_READ_STATUS 0 +#define ACTION_RESET 1 +#define ACTION_REENABLE 2 +#define ACTION_SOFT_RESET 3 +#define ACTION_ENUM 4 +#define ACTION_IDENTIFY 5 + + +/* + * ata_cdb struct + */ + + +union ata_cdb { + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char WriteData3F6; + unsigned char WriteData1F1; + unsigned char WriteData1F2; + unsigned char WriteData1F3; + unsigned char WriteData1F4; + unsigned char WriteData1F5; + unsigned char WriteData1F6; + unsigned char WriteData1F7; + unsigned char Reserved[3]; + } generic; + + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char AlternateStatusByte; + unsigned char ErrorByte; + unsigned char SectorCountByte; + unsigned char SectorNumberByte; + unsigned char CylinderLowByte; + unsigned char CylinderHighByte; + unsigned char DeviceHeadByte; + unsigned char StatusByte; + unsigned char Reserved[3]; + } read; + + struct { + unsigned char SignatureByte0; + unsigned char SignatureByte1; + unsigned char ActionSelect; + unsigned char RegisterSelect; + unsigned char TransferBlockSize; + unsigned char DeviceControlByte; + unsigned char FeaturesByte; + unsigned char SectorCountByte; + unsigned char SectorNumberByte; + unsigned char CylinderLowByte; + unsigned char CylinderHighByte; + unsigned char DeviceHeadByte; + unsigned char CommandByte; + unsigned char Reserved[3]; + } write; +}; + + +/* + * Inquiry data structure. This is the data returned from the target + * after it receives an inquiry. + * + * This structure may be extended by the number of bytes specified + * in the field AdditionalLength. The defined size constant only + * includes fields through ProductRevisionLevel. + */ + +/* + * DeviceType field + */ +#define DIRECT_ACCESS_DEVICE 0x00 /* disks */ +#define DEVICE_REMOVABLE 0x80 + +struct inquiry_data { + unsigned char DeviceType; + unsigned char DeviceTypeModifier; + unsigned char Versions; + unsigned char Format; + unsigned char AdditionalLength; + unsigned char Reserved[2]; + unsigned char Capability; + unsigned char VendorId[8]; + unsigned char ProductId[16]; + unsigned char ProductRevisionLevel[4]; + unsigned char VendorSpecific[20]; + unsigned char Reserved3[40]; +} __attribute__ ((packed)); + +/* + * INQUIRY data buffer size + */ + +#define INQUIRYDATABUFFERSIZE 36 + + +/* + * ISD200 CONFIG data struct + */ + +#define ATACFG_TIMING 0x0f +#define ATACFG_ATAPI_RESET 0x10 +#define ATACFG_MASTER 0x20 +#define ATACFG_BLOCKSIZE 0xa0 + +#define ATACFGE_LAST_LUN 0x07 +#define ATACFGE_DESC_OVERRIDE 0x08 +#define ATACFGE_STATE_SUSPEND 0x10 +#define ATACFGE_SKIP_BOOT 0x20 +#define ATACFGE_CONF_DESC2 0x40 +#define ATACFGE_INIT_STATUS 0x80 + +#define CFG_CAPABILITY_SRST 0x01 + +struct isd200_config { + unsigned char EventNotification; + unsigned char ExternalClock; + unsigned char ATAInitTimeout; + unsigned char ATAConfig; + unsigned char ATAMajorCommand; + unsigned char ATAMinorCommand; + unsigned char ATAExtraConfig; + unsigned char Capability; +}__attribute__ ((packed)); + + +/* + * ISD200 driver information struct + */ + +struct isd200_info { + struct inquiry_data InquiryData; + struct hd_driveid *id; + struct isd200_config ConfigData; + unsigned char *RegsBuf; + unsigned char ATARegs[8]; + unsigned char DeviceHead; + unsigned char DeviceFlags; + + /* maximum number of LUNs supported */ + unsigned char MaxLUNs; + struct scsi_cmnd srb; +}; + + +/* + * Read Capacity Data - returned in Big Endian format + */ + +struct read_capacity_data { + __be32 LogicalBlockAddress; + __be32 BytesPerBlock; +}; + +/* + * Read Block Limits Data - returned in Big Endian format + * This structure returns the maximum and minimum block + * size for a TAPE device. + */ + +struct read_block_limits { + unsigned char Reserved; + unsigned char BlockMaximumSize[3]; + unsigned char BlockMinimumSize[2]; +}; + + +/* + * Sense Data Format + */ + +#define SENSE_ERRCODE 0x7f +#define SENSE_ERRCODE_VALID 0x80 +#define SENSE_FLAG_SENSE_KEY 0x0f +#define SENSE_FLAG_BAD_LENGTH 0x20 +#define SENSE_FLAG_END_OF_MEDIA 0x40 +#define SENSE_FLAG_FILE_MARK 0x80 +struct sense_data { + unsigned char ErrorCode; + unsigned char SegmentNumber; + unsigned char Flags; + unsigned char Information[4]; + unsigned char AdditionalSenseLength; + unsigned char CommandSpecificInformation[4]; + unsigned char AdditionalSenseCode; + unsigned char AdditionalSenseCodeQualifier; + unsigned char FieldReplaceableUnitCode; + unsigned char SenseKeySpecific[3]; +} __attribute__ ((packed)); + +/* + * Default request sense buffer size + */ + +#define SENSE_BUFFER_SIZE 18 + +/*********************************************************************** + * Helper routines + ***********************************************************************/ + +/************************************************************************** + * isd200_build_sense + * + * Builds an artificial sense buffer to report the results of a + * failed command. + * + * RETURNS: + * void + */ +static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0]; + unsigned char error = info->ATARegs[IDE_ERROR_OFFSET]; + + if(error & ATA_ERROR_MEDIA_CHANGE) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = UNIT_ATTENTION; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if(error & MCR_ERR) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = UNIT_ATTENTION; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if(error & TRK0_ERR) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = NOT_READY; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else if(error & ECC_ERR) { + buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; + buf->AdditionalSenseLength = 0xb; + buf->Flags = DATA_PROTECT; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } else { + buf->ErrorCode = 0; + buf->AdditionalSenseLength = 0; + buf->Flags = 0; + buf->AdditionalSenseCode = 0; + buf->AdditionalSenseCodeQualifier = 0; + } +} + + +/*********************************************************************** + * Transport routines + ***********************************************************************/ + + +/************************************************************************** + * isd200_action + * + * Routine for sending commands to the isd200 + * + * RETURNS: + * ISD status code + */ +static int isd200_action( struct us_data *us, int action, + void* pointer, int value ) +{ + union ata_cdb ata; + struct scsi_device srb_dev; + struct isd200_info *info = (struct isd200_info *)us->extra; + struct scsi_cmnd *srb = &info->srb; + int status; + + memset(&ata, 0, sizeof(ata)); + memset(&srb_dev, 0, sizeof(srb_dev)); + srb->device = &srb_dev; + ++srb->serial_number; + + ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ata.generic.TransferBlockSize = 1; + + switch ( action ) { + case ACTION_READ_STATUS: + US_DEBUGP(" isd200_action(READ_STATUS)\n"); + ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; + ata.generic.RegisterSelect = + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_STATUS | REG_ERROR; + srb->sc_data_direction = DMA_FROM_DEVICE; + srb->request_buffer = pointer; + srb->request_bufflen = value; + break; + + case ACTION_ENUM: + US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4| + ACTION_SELECT_5; + ata.generic.RegisterSelect = REG_DEVICE_HEAD; + ata.write.DeviceHeadByte = value; + srb->sc_data_direction = DMA_NONE; + break; + + case ACTION_RESET: + US_DEBUGP(" isd200_action(RESET)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4; + ata.generic.RegisterSelect = REG_DEVICE_CONTROL; + ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; + srb->sc_data_direction = DMA_NONE; + break; + + case ACTION_REENABLE: + US_DEBUGP(" isd200_action(REENABLE)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| + ACTION_SELECT_3|ACTION_SELECT_4; + ata.generic.RegisterSelect = REG_DEVICE_CONTROL; + ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; + srb->sc_data_direction = DMA_NONE; + break; + + case ACTION_SOFT_RESET: + US_DEBUGP(" isd200_action(SOFT_RESET)\n"); + ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; + ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; + ata.write.DeviceHeadByte = info->DeviceHead; + ata.write.CommandByte = WIN_SRST; + srb->sc_data_direction = DMA_NONE; + break; + + case ACTION_IDENTIFY: + US_DEBUGP(" isd200_action(IDENTIFY)\n"); + ata.generic.RegisterSelect = REG_COMMAND; + ata.write.CommandByte = WIN_IDENTIFY; + srb->sc_data_direction = DMA_FROM_DEVICE; + srb->request_buffer = (void *) info->id; + srb->request_bufflen = sizeof(struct hd_driveid); + break; + + default: + US_DEBUGP("Error: Undefined action %d\n",action); + break; + } + + memcpy(srb->cmnd, &ata, sizeof(ata.generic)); + srb->cmd_len = sizeof(ata.generic); + status = usb_stor_Bulk_transport(srb, us); + if (status == USB_STOR_TRANSPORT_GOOD) + status = ISD200_GOOD; + else { + US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); + status = ISD200_ERROR; + /* need to reset device here */ + } + + return status; +} + +/************************************************************************** + * isd200_read_regs + * + * Read ATA Registers + * + * RETURNS: + * ISD status code + */ +static int isd200_read_regs( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int transferStatus; + + US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); + + transferStatus = isd200_action( us, ACTION_READ_STATUS, + info->RegsBuf, sizeof(info->ATARegs) ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + US_DEBUGP(" Error reading ATA registers\n"); + retStatus = ISD200_ERROR; + } else { + memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); + US_DEBUGP(" Got ATA Register[IDE_ERROR_OFFSET] = 0x%x\n", + info->ATARegs[IDE_ERROR_OFFSET]); + } + + return retStatus; +} + + +/************************************************************************** + * Invoke the transport and basic error-handling/recovery methods + * + * This is used by the protocol layers to actually send the message to + * the device and receive the response. + */ +static void isd200_invoke_transport( struct us_data *us, + struct scsi_cmnd *srb, + union ata_cdb *ataCdb ) +{ + int need_auto_sense = 0; + int transferStatus; + int result; + + /* send the command to the transport layer */ + memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic)); + srb->cmd_len = sizeof(ataCdb->generic); + transferStatus = usb_stor_Bulk_transport(srb, us); + + /* if the command gets aborted by the higher layers, we need to + * short-circuit all other processing + */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { + US_DEBUGP("-- command was aborted\n"); + goto Handle_Abort; + } + + switch (transferStatus) { + + case USB_STOR_TRANSPORT_GOOD: + /* Indicate a good result */ + srb->result = SAM_STAT_GOOD; + break; + + case USB_STOR_TRANSPORT_NO_SENSE: + US_DEBUGP("-- transport indicates protocol failure\n"); + srb->result = SAM_STAT_CHECK_CONDITION; + return; + + case USB_STOR_TRANSPORT_FAILED: + US_DEBUGP("-- transport indicates command failure\n"); + need_auto_sense = 1; + break; + + case USB_STOR_TRANSPORT_ERROR: + US_DEBUGP("-- transport indicates transport error\n"); + srb->result = DID_ERROR << 16; + /* Need reset here */ + return; + + default: + US_DEBUGP("-- transport indicates unknown error\n"); + srb->result = DID_ERROR << 16; + /* Need reset here */ + return; + } + + if ((srb->resid > 0) && + !((srb->cmnd[0] == REQUEST_SENSE) || + (srb->cmnd[0] == INQUIRY) || + (srb->cmnd[0] == MODE_SENSE) || + (srb->cmnd[0] == LOG_SENSE) || + (srb->cmnd[0] == MODE_SENSE_10))) { + US_DEBUGP("-- unexpectedly short transfer\n"); + need_auto_sense = 1; + } + + if (need_auto_sense) { + result = isd200_read_regs(us); + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { + US_DEBUGP("-- auto-sense aborted\n"); + goto Handle_Abort; + } + if (result == ISD200_GOOD) { + isd200_build_sense(us, srb); + srb->result = SAM_STAT_CHECK_CONDITION; + + /* If things are really okay, then let's show that */ + if ((srb->sense_buffer[2] & 0xf) == 0x0) + srb->result = SAM_STAT_GOOD; + } else { + srb->result = DID_ERROR << 16; + /* Need reset here */ + } + } + + /* Regardless of auto-sense, if we _know_ we have an error + * condition, show that in the result code + */ + if (transferStatus == USB_STOR_TRANSPORT_FAILED) + srb->result = SAM_STAT_CHECK_CONDITION; + return; + + /* abort processing: the bulk-only transport requires a reset + * following an abort */ + Handle_Abort: + srb->result = DID_ABORT << 16; + + /* permit the reset transfer to take place */ + clear_bit(US_FLIDX_ABORTING, &us->flags); + /* Need reset here */ +} + +#ifdef CONFIG_USB_STORAGE_DEBUG +static void isd200_log_config( struct isd200_info* info ) +{ + US_DEBUGP(" Event Notification: 0x%x\n", + info->ConfigData.EventNotification); + US_DEBUGP(" External Clock: 0x%x\n", + info->ConfigData.ExternalClock); + US_DEBUGP(" ATA Init Timeout: 0x%x\n", + info->ConfigData.ATAInitTimeout); + US_DEBUGP(" ATAPI Command Block Size: 0x%x\n", + (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); + US_DEBUGP(" Master/Slave Selection: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_MASTER); + US_DEBUGP(" ATAPI Reset: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); + US_DEBUGP(" ATA Timing: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_TIMING); + US_DEBUGP(" ATA Major Command: 0x%x\n", + info->ConfigData.ATAMajorCommand); + US_DEBUGP(" ATA Minor Command: 0x%x\n", + info->ConfigData.ATAMinorCommand); + US_DEBUGP(" Init Status: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); + US_DEBUGP(" Config Descriptor 2: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); + US_DEBUGP(" Skip Device Boot: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); + US_DEBUGP(" ATA 3 State Supsend: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); + US_DEBUGP(" Descriptor Override: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); + US_DEBUGP(" Last LUN Identifier: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); + US_DEBUGP(" SRST Enable: 0x%x\n", + info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); +} +#endif + +/************************************************************************** + * isd200_write_config + * + * Write the ISD200 Configuration data + * + * RETURNS: + * ISD status code + */ +static int isd200_write_config( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int result; + +#ifdef CONFIG_USB_STORAGE_DEBUG + US_DEBUGP("Entering isd200_write_config\n"); + US_DEBUGP(" Writing the following ISD200 Config Data:\n"); + isd200_log_config(info); +#endif + + /* let's send the command via the control pipe */ + result = usb_stor_ctrl_transfer( + us, + us->send_ctrl_pipe, + 0x01, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x0000, + 0x0002, + (void *) &info->ConfigData, + sizeof(info->ConfigData)); + + if (result >= 0) { + US_DEBUGP(" ISD200 Config Data was written successfully\n"); + } else { + US_DEBUGP(" Request to write ISD200 Config Data failed!\n"); + retStatus = ISD200_ERROR; + } + + US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_read_config + * + * Reads the ISD200 Configuration data + * + * RETURNS: + * ISD status code + */ +static int isd200_read_config( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + int result; + + US_DEBUGP("Entering isd200_read_config\n"); + + /* read the configuration information from ISD200. Use this to */ + /* determine what the special ATA CDB bytes are. */ + + result = usb_stor_ctrl_transfer( + us, + us->recv_ctrl_pipe, + 0x02, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x0000, + 0x0002, + (void *) &info->ConfigData, + sizeof(info->ConfigData)); + + + if (result >= 0) { + US_DEBUGP(" Retrieved the following ISD200 Config Data:\n"); +#ifdef CONFIG_USB_STORAGE_DEBUG + isd200_log_config(info); +#endif + } else { + US_DEBUGP(" Request to get ISD200 Config Data failed!\n"); + retStatus = ISD200_ERROR; + } + + US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_atapi_soft_reset + * + * Perform an Atapi Soft Reset on the device + * + * RETURNS: + * NT status code + */ +static int isd200_atapi_soft_reset( struct us_data *us ) +{ + int retStatus = ISD200_GOOD; + int transferStatus; + + US_DEBUGP("Entering isd200_atapi_soft_reset\n"); + + transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + US_DEBUGP(" Error issuing Atapi Soft Reset\n"); + retStatus = ISD200_ERROR; + } + + US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_srst + * + * Perform an SRST on the device + * + * RETURNS: + * ISD status code + */ +static int isd200_srst( struct us_data *us ) +{ + int retStatus = ISD200_GOOD; + int transferStatus; + + US_DEBUGP("Entering isd200_SRST\n"); + + transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); + + /* check to see if this request failed */ + if (transferStatus != ISD200_TRANSPORT_GOOD) { + US_DEBUGP(" Error issuing SRST\n"); + retStatus = ISD200_ERROR; + } else { + /* delay 10ms to give the drive a chance to see it */ + msleep(10); + + transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + US_DEBUGP(" Error taking drive out of reset\n"); + retStatus = ISD200_ERROR; + } else { + /* delay 50ms to give the drive a chance to recover after SRST */ + msleep(50); + } + } + + US_DEBUGP("Leaving isd200_srst %08X\n", retStatus); + return retStatus; +} + + +/************************************************************************** + * isd200_try_enum + * + * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS + * and tries to analyze the status registers + * + * RETURNS: + * ISD status code + */ +static int isd200_try_enum(struct us_data *us, unsigned char master_slave, + int detect ) +{ + int status = ISD200_GOOD; + unsigned long endTime; + struct isd200_info *info = (struct isd200_info *)us->extra; + unsigned char *regs = info->RegsBuf; + int recheckAsMaster = 0; + + if ( detect ) + endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ; + else + endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ; + + /* loop until we detect !BSY or timeout */ + while(1) { +#ifdef CONFIG_USB_STORAGE_DEBUG + char* mstr = master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"; +#endif + + status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); + if ( status != ISD200_GOOD ) + break; + + status = isd200_action( us, ACTION_READ_STATUS, + regs, 8 ); + if ( status != ISD200_GOOD ) + break; + + if (!detect) { + if (regs[IDE_STATUS_OFFSET] & BUSY_STAT ) { + US_DEBUGP(" %s status is still BSY, try again...\n",mstr); + } else { + US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr); + break; + } + } + /* check for BUSY_STAT and */ + /* WRERR_STAT (workaround ATA Zip drive) and */ + /* ERR_STAT (workaround for Archos CD-ROM) */ + else if (regs[IDE_STATUS_OFFSET] & + (BUSY_STAT | WRERR_STAT | ERR_STAT )) { + US_DEBUGP(" Status indicates it is not ready, try again...\n"); + } + /* check for DRDY, ATA devices set DRDY after SRST */ + else if (regs[IDE_STATUS_OFFSET] & READY_STAT) { + US_DEBUGP(" Identified ATA device\n"); + info->DeviceFlags |= DF_ATA_DEVICE; + info->DeviceHead = master_slave; + break; + } + /* check Cylinder High/Low to + determine if it is an ATAPI device + */ + else if ((regs[IDE_HCYL_OFFSET] == 0xEB) && + (regs[IDE_LCYL_OFFSET] == 0x14)) { + /* It seems that the RICOH + MP6200A CD/RW drive will + report itself okay as a + slave when it is really a + master. So this check again + as a master device just to + make sure it doesn't report + itself okay as a master also + */ + if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && + !recheckAsMaster) { + US_DEBUGP(" Identified ATAPI device as slave. Rechecking again as master\n"); + recheckAsMaster = 1; + master_slave = ATA_ADDRESS_DEVHEAD_STD; + } else { + US_DEBUGP(" Identified ATAPI device\n"); + info->DeviceHead = master_slave; + + status = isd200_atapi_soft_reset(us); + break; + } + } else { + US_DEBUGP(" Not ATA, not ATAPI. Weird.\n"); + break; + } + + /* check for timeout on this request */ + if (time_after_eq(jiffies, endTime)) { + if (!detect) + US_DEBUGP(" BSY check timeout, just continue with next operation...\n"); + else + US_DEBUGP(" Device detect timeout!\n"); + break; + } + } + + return status; +} + +/************************************************************************** + * isd200_manual_enum + * + * Determines if the drive attached is an ATA or ATAPI and if it is a + * master or slave. + * + * RETURNS: + * ISD status code + */ +static int isd200_manual_enum(struct us_data *us) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + + US_DEBUGP("Entering isd200_manual_enum\n"); + + retStatus = isd200_read_config(us); + if (retStatus == ISD200_GOOD) { + int isslave; + /* master or slave? */ + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0); + if (retStatus == ISD200_GOOD) + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0); + + if (retStatus == ISD200_GOOD) { + retStatus = isd200_srst(us); + if (retStatus == ISD200_GOOD) + /* ata or atapi? */ + retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1); + } + + isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; + if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { + US_DEBUGP(" Setting Master/Slave selection to %d\n", isslave); + info->ConfigData.ATAConfig &= 0x3f; + info->ConfigData.ATAConfig |= (isslave<<6); + retStatus = isd200_write_config(us); + } + } + + US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus); + return(retStatus); +} + + +/************************************************************************** + * isd200_get_inquiry_data + * + * Get inquiry data + * + * RETURNS: + * ISD status code + */ +static int isd200_get_inquiry_data( struct us_data *us ) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + int retStatus = ISD200_GOOD; + struct hd_driveid *id = info->id; + + US_DEBUGP("Entering isd200_get_inquiry_data\n"); + + /* set default to Master */ + info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; + + /* attempt to manually enumerate this device */ + retStatus = isd200_manual_enum(us); + if (retStatus == ISD200_GOOD) { + int transferStatus; + + /* check for an ATA device */ + if (info->DeviceFlags & DF_ATA_DEVICE) { + /* this must be an ATA device */ + /* perform an ATA Command Identify */ + transferStatus = isd200_action( us, ACTION_IDENTIFY, + id, + sizeof(struct hd_driveid) ); + if (transferStatus != ISD200_TRANSPORT_GOOD) { + /* Error issuing ATA Command Identify */ + US_DEBUGP(" Error issuing ATA Command Identify\n"); + retStatus = ISD200_ERROR; + } else { + /* ATA Command Identify successful */ + int i; + __be16 *src; + __u16 *dest; + ide_fix_driveid(id); + + US_DEBUGP(" Identify Data Structure:\n"); + US_DEBUGP(" config = 0x%x\n", id->config); + US_DEBUGP(" cyls = 0x%x\n", id->cyls); + US_DEBUGP(" heads = 0x%x\n", id->heads); + US_DEBUGP(" track_bytes = 0x%x\n", id->track_bytes); + US_DEBUGP(" sector_bytes = 0x%x\n", id->sector_bytes); + US_DEBUGP(" sectors = 0x%x\n", id->sectors); + US_DEBUGP(" serial_no[0] = 0x%x\n", id->serial_no[0]); + US_DEBUGP(" buf_type = 0x%x\n", id->buf_type); + US_DEBUGP(" buf_size = 0x%x\n", id->buf_size); + US_DEBUGP(" ecc_bytes = 0x%x\n", id->ecc_bytes); + US_DEBUGP(" fw_rev[0] = 0x%x\n", id->fw_rev[0]); + US_DEBUGP(" model[0] = 0x%x\n", id->model[0]); + US_DEBUGP(" max_multsect = 0x%x\n", id->max_multsect); + US_DEBUGP(" dword_io = 0x%x\n", id->dword_io); + US_DEBUGP(" capability = 0x%x\n", id->capability); + US_DEBUGP(" tPIO = 0x%x\n", id->tPIO); + US_DEBUGP(" tDMA = 0x%x\n", id->tDMA); + US_DEBUGP(" field_valid = 0x%x\n", id->field_valid); + US_DEBUGP(" cur_cyls = 0x%x\n", id->cur_cyls); + US_DEBUGP(" cur_heads = 0x%x\n", id->cur_heads); + US_DEBUGP(" cur_sectors = 0x%x\n", id->cur_sectors); + US_DEBUGP(" cur_capacity = 0x%x\n", (id->cur_capacity1 << 16) + id->cur_capacity0 ); + US_DEBUGP(" multsect = 0x%x\n", id->multsect); + US_DEBUGP(" lba_capacity = 0x%x\n", id->lba_capacity); + US_DEBUGP(" command_set_1 = 0x%x\n", id->command_set_1); + US_DEBUGP(" command_set_2 = 0x%x\n", id->command_set_2); + + memset(&info->InquiryData, 0, sizeof(info->InquiryData)); + + /* Standard IDE interface only supports disks */ + info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE; + + /* The length must be at least 36 (5 + 31) */ + info->InquiryData.AdditionalLength = 0x1F; + + if (id->command_set_1 & COMMANDSET_MEDIA_STATUS) { + /* set the removable bit */ + info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE; + info->DeviceFlags |= DF_REMOVABLE_MEDIA; + } + + /* Fill in vendor identification fields */ + src = (__be16*)id->model; + dest = (__u16*)info->InquiryData.VendorId; + for (i=0;i<4;i++) + dest[i] = be16_to_cpu(src[i]); + + src = (__be16*)(id->model+8); + dest = (__u16*)info->InquiryData.ProductId; + for (i=0;i<8;i++) + dest[i] = be16_to_cpu(src[i]); + + src = (__be16*)id->fw_rev; + dest = (__u16*)info->InquiryData.ProductRevisionLevel; + for (i=0;i<2;i++) + dest[i] = be16_to_cpu(src[i]); + + /* determine if it supports Media Status Notification */ + if (id->command_set_2 & COMMANDSET_MEDIA_STATUS) { + US_DEBUGP(" Device supports Media Status Notification\n"); + + /* Indicate that it is enabled, even though it is not + * This allows the lock/unlock of the media to work + * correctly. + */ + info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED; + } + else + info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED; + + } + } else { + /* + * this must be an ATAPI device + * use an ATAPI protocol (Transparent SCSI) + */ + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + + US_DEBUGP("Protocol changed to: %s\n", us->protocol_name); + + /* Free driver structure */ + us->extra_destructor(info); + us->extra = NULL; + us->extra_destructor = NULL; + } + } + + US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus); + + return(retStatus); +} + + +/************************************************************************** + * isd200_scsi_to_ata + * + * Translate SCSI commands to ATA commands. + * + * RETURNS: + * 1 if the command needs to be sent to the transport layer + * 0 otherwise + */ +static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, + union ata_cdb * ataCdb) +{ + struct isd200_info *info = (struct isd200_info *)us->extra; + struct hd_driveid *id = info->id; + int sendToTransport = 1; + unsigned char sectnum, head; + unsigned short cylinder; + unsigned long lba; + unsigned long blockCount; + unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + + memset(ataCdb, 0, sizeof(union ata_cdb)); + + /* SCSI Command */ + switch (srb->cmnd[0]) { + case INQUIRY: + US_DEBUGP(" ATA OUT - INQUIRY\n"); + + /* copy InquiryData */ + usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, + sizeof(info->InquiryData), srb); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + break; + + case MODE_SENSE: + US_DEBUGP(" ATA OUT - SCSIOP_MODE_SENSE\n"); + + /* Initialize the return buffer */ + usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); + + if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) + { + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + srb->request_bufflen = 0; + } else { + US_DEBUGP(" Media Status not supported, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case TEST_UNIT_READY: + US_DEBUGP(" ATA OUT - SCSIOP_TEST_UNIT_READY\n"); + + if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) + { + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + srb->request_bufflen = 0; + } else { + US_DEBUGP(" Media Status not supported, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case READ_CAPACITY: + { + unsigned long capacity; + struct read_capacity_data readCapacityData; + + US_DEBUGP(" ATA OUT - SCSIOP_READ_CAPACITY\n"); + + if (id->capability & CAPABILITY_LBA ) { + capacity = id->lba_capacity - 1; + } else { + capacity = (id->heads * + id->cyls * + id->sectors) - 1; + } + readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity); + readCapacityData.BytesPerBlock = cpu_to_be32(0x200); + + usb_stor_set_xfer_buf((unsigned char *) &readCapacityData, + sizeof(readCapacityData), srb); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case READ_10: + US_DEBUGP(" ATA OUT - SCSIOP_READ\n"); + + lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); + blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; + + if (id->capability & CAPABILITY_LBA) { + sectnum = (unsigned char)(lba); + cylinder = (unsigned short)(lba>>8); + head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); + } else { + sectnum = (unsigned char)((lba % id->sectors) + 1); + cylinder = (unsigned short)(lba / (id->sectors * + id->heads)); + head = (unsigned char)((lba / id->sectors) % + id->heads); + } + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = + REG_SECTOR_COUNT | REG_SECTOR_NUMBER | + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_DEVICE_HEAD | REG_COMMAND; + ataCdb->write.SectorCountByte = (unsigned char)blockCount; + ataCdb->write.SectorNumberByte = sectnum; + ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); + ataCdb->write.CylinderLowByte = (unsigned char)cylinder; + ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); + ataCdb->write.CommandByte = WIN_READ; + break; + + case WRITE_10: + US_DEBUGP(" ATA OUT - SCSIOP_WRITE\n"); + + lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); + blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; + + if (id->capability & CAPABILITY_LBA) { + sectnum = (unsigned char)(lba); + cylinder = (unsigned short)(lba>>8); + head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); + } else { + sectnum = (unsigned char)((lba % id->sectors) + 1); + cylinder = (unsigned short)(lba / (id->sectors * id->heads)); + head = (unsigned char)((lba / id->sectors) % id->heads); + } + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = + REG_SECTOR_COUNT | REG_SECTOR_NUMBER | + REG_CYLINDER_LOW | REG_CYLINDER_HIGH | + REG_DEVICE_HEAD | REG_COMMAND; + ataCdb->write.SectorCountByte = (unsigned char)blockCount; + ataCdb->write.SectorNumberByte = sectnum; + ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); + ataCdb->write.CylinderLowByte = (unsigned char)cylinder; + ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); + ataCdb->write.CommandByte = WIN_WRITE; + break; + + case ALLOW_MEDIUM_REMOVAL: + US_DEBUGP(" ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); + + if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { + US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? + WIN_DOORLOCK : WIN_DOORUNLOCK; + srb->request_bufflen = 0; + } else { + US_DEBUGP(" Not removeable media, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + case START_STOP: + US_DEBUGP(" ATA OUT - SCSIOP_START_STOP_UNIT\n"); + US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + + if ((srb->cmnd[4] & 0x3) == 0x2) { + US_DEBUGP(" Media Eject\n"); + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 0; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; + } else if ((srb->cmnd[4] & 0x3) == 0x1) { + US_DEBUGP(" Get Media Status\n"); + ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; + ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; + ataCdb->generic.TransferBlockSize = 1; + ataCdb->generic.RegisterSelect = REG_COMMAND; + ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; + srb->request_bufflen = 0; + } else { + US_DEBUGP(" Nothing to do, just report okay\n"); + srb->result = SAM_STAT_GOOD; + sendToTransport = 0; + } + break; + + default: + US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]); + srb->result = DID_ERROR << 16; + sendToTransport = 0; + break; + } + + return(sendToTransport); +} + + +/************************************************************************** + * isd200_free_info + * + * Frees the driver structure. + */ +static void isd200_free_info_ptrs(void *info_) +{ + struct isd200_info *info = (struct isd200_info *) info_; + + if (info) { + kfree(info->id); + kfree(info->RegsBuf); + } +} + +/************************************************************************** + * isd200_init_info + * + * Allocates (if necessary) and initializes the driver structure. + * + * RETURNS: + * ISD status code + */ +static int isd200_init_info(struct us_data *us) +{ + int retStatus = ISD200_GOOD; + struct isd200_info *info; + + info = (struct isd200_info *) + kmalloc(sizeof(struct isd200_info), GFP_KERNEL); + if (!info) + retStatus = ISD200_ERROR; + else { + memset(info, 0, sizeof(struct isd200_info)); + info->id = (struct hd_driveid *) + kmalloc(sizeof(struct hd_driveid), GFP_KERNEL); + info->RegsBuf = (unsigned char *) + kmalloc(sizeof(info->ATARegs), GFP_KERNEL); + if (!info->id || !info->RegsBuf) { + isd200_free_info_ptrs(info); + kfree(info); + retStatus = ISD200_ERROR; + } else + memset(info->id, 0, sizeof(struct hd_driveid)); + } + + if (retStatus == ISD200_GOOD) { + us->extra = info; + us->extra_destructor = isd200_free_info_ptrs; + } else + US_DEBUGP("ERROR - kmalloc failure\n"); + + return(retStatus); +} + +/************************************************************************** + * Initialization for the ISD200 + */ + +int isd200_Initialization(struct us_data *us) +{ + US_DEBUGP("ISD200 Initialization...\n"); + + /* Initialize ISD200 info struct */ + + if (isd200_init_info(us) == ISD200_ERROR) { + US_DEBUGP("ERROR Initializing ISD200 Info struct\n"); + } else { + /* Get device specific data */ + + if (isd200_get_inquiry_data(us) != ISD200_GOOD) + US_DEBUGP("ISD200 Initialization Failure\n"); + else + US_DEBUGP("ISD200 Initialization complete\n"); + } + + return 0; +} + + +/************************************************************************** + * Protocol and Transport for the ISD200 ASIC + * + * This protocol and transport are for ATA devices connected to an ISD200 + * ASIC. An ATAPI device that is conected as a slave device will be + * detected in the driver initialization function and the protocol will + * be changed to an ATAPI protocol (Transparent SCSI). + * + */ + +void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) +{ + int sendToTransport = 1; + union ata_cdb ataCdb; + + /* Make sure driver was initialized */ + + if (us->extra == NULL) + US_DEBUGP("ERROR Driver not initialized\n"); + + /* Convert command */ + srb->resid = 0; + sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); + + /* send the command to the transport layer */ + if (sendToTransport) + isd200_invoke_transport(us, srb, &ataCdb); +} diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/isd200.h new file mode 100644 index 000000000000..0a35f4fa78f8 --- /dev/null +++ b/drivers/usb/storage/isd200.h @@ -0,0 +1,31 @@ +/* Header File for In-System Design, Inc. ISD200 ASIC + * + * First release + * + * Current development and maintenance by: + * (c) 2000 In-System Design, Inc. (support@in-system.com) + * + * See isd200.c for more information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_ISD200_H +#define _USB_ISD200_H + +extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us); +extern int isd200_Initialization(struct us_data *us); + +#endif diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c new file mode 100644 index 000000000000..aff9d51c327c --- /dev/null +++ b/drivers/usb/storage/jumpshot.c @@ -0,0 +1,596 @@ +/* Driver for Lexar "Jumpshot" Compact Flash reader + * + * $Id: jumpshot.c,v 1.7 2002/02/25 00:40:13 mdharm Exp $ + * + * jumpshot driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) + * + * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver + * which I used as a template for this driver. + * + * Some bugfixes and scatter-gather code by Gregory P. Smith + * (greg-usb@electricrain.com) + * + * Fix for media change by Joerg Schneider (js@joergschneider.com) + * + * Developed with the assistance of: + * + * (C) 2002 Alan Stern <stern@rowland.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * This driver attempts to support the Lexar Jumpshot USB CompactFlash + * reader. Like many other USB CompactFlash readers, the Jumpshot contains + * a USB-to-ATA chip. + * + * This driver supports reading and writing. If you're truly paranoid, + * however, you can force the driver into a write-protected state by setting + * the WP enable bits in jumpshot_handle_mode_sense. See the comments + * in that routine. + */ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "jumpshot.h" + + +static inline int jumpshot_bulk_read(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("jumpshot_bulk_read: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, len, NULL); +} + + +static inline int jumpshot_bulk_write(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("jumpshot_bulk_write: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + data, len, NULL); +} + + +static int jumpshot_get_status(struct us_data *us) +{ + int rc; + + if (!us) + return USB_STOR_TRANSPORT_ERROR; + + // send the setup + rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + 0, 0xA0, 0, 7, us->iobuf, 1); + + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (us->iobuf[0] != 0x50) { + US_DEBUGP("jumpshot_get_status: 0x%2x\n", + us->iobuf[0]); + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +static int jumpshot_read_data(struct us_data *us, + struct jumpshot_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_idx = 0, sg_offset = 0; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 | ((sector >> 24) & 0x0F); + command[6] = 0x20; + + // send the setup + command + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 1, command, 7); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = jumpshot_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + US_DEBUGP("jumpshot_read_data: %d bytes\n", len); + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int jumpshot_write_data(struct us_data *us, + struct jumpshot_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result, waitcount; + unsigned int sg_idx = 0, sg_offset = 0; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, FROM_XFER_BUF); + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 | ((sector >> 24) & 0x0F); + command[6] = 0x30; + + // send the setup + command + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 1, command, 7); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // send the data + result = jumpshot_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result. apparently the bulk write can complete + // before the jumpshot drive is finished writing. so we loop + // here until we get a good return code + waitcount = 0; + do { + result = jumpshot_get_status(us); + if (result != USB_STOR_TRANSPORT_GOOD) { + // I have not experimented to find the smallest value. + // + msleep(50); + } + } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10)); + + if (result != USB_STOR_TRANSPORT_GOOD) + US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n"); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return result; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +static int jumpshot_id_device(struct us_data *us, + struct jumpshot_info *info) +{ + unsigned char *command = us->iobuf; + unsigned char *reply; + int rc; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + command[0] = 0xE0; + command[1] = 0xEC; + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + // send the setup + rc = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + 0, 0x20, 0, 6, command, 2); + + if (rc != USB_STOR_XFER_GOOD) { + US_DEBUGP("jumpshot_id_device: Gah! " + "send_control for read_capacity failed\n"); + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // read the reply + rc = jumpshot_bulk_read(us, reply, 512); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + + rc = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(reply); + return rc; +} + +static int jumpshot_handle_mode_sense(struct us_data *us, + struct scsi_cmnd * srb, + int sense_6) +{ + static unsigned char rw_err_page[12] = { + 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 + }; + static unsigned char cache_page[12] = { + 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char rbac_page[12] = { + 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char timer_page[8] = { + 0x1C, 0x6, 0, 0, 0, 0 + }; + unsigned char pc, page_code; + unsigned int i = 0; + struct jumpshot_info *info = (struct jumpshot_info *) (us->extra); + unsigned char *ptr = us->iobuf; + + pc = srb->cmnd[2] >> 6; + page_code = srb->cmnd[2] & 0x3F; + + switch (pc) { + case 0x0: + US_DEBUGP("jumpshot_handle_mode_sense: Current values\n"); + break; + case 0x1: + US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n"); + break; + case 0x2: + US_DEBUGP("jumpshot_handle_mode_sense: Default values\n"); + break; + case 0x3: + US_DEBUGP("jumpshot_handle_mode_sense: Saves values\n"); + break; + } + + memset(ptr, 0, 8); + if (sense_6) { + ptr[2] = 0x00; // WP enable: 0x80 + i = 4; + } else { + ptr[3] = 0x00; // WP enable: 0x80 + i = 8; + } + + switch (page_code) { + case 0x0: + // vendor-specific mode + info->sense_key = 0x05; + info->sense_asc = 0x24; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + + case 0x1: + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + + case 0x8: + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + break; + + case 0x1B: + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + break; + + case 0x1C: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + break; + + case 0x3F: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + } + + if (sense_6) + ptr[0] = i - 1; + else + ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); + usb_stor_set_xfer_buf(ptr, i, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + + +static void jumpshot_info_destructor(void *extra) +{ + // this routine is a placeholder... + // currently, we don't allocate any extra blocks so we're okay +} + + + +// Transport for the Lexar 'Jumpshot' +// +int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us) +{ + struct jumpshot_info *info; + int rc; + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (!us->extra) { + us->extra = kmalloc(sizeof(struct jumpshot_info), GFP_NOIO); + if (!us->extra) { + US_DEBUGP("jumpshot_transport: Gah! Can't allocate storage for jumpshot info struct!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + memset(us->extra, 0, sizeof(struct jumpshot_info)); + us->extra_destructor = jumpshot_info_destructor; + } + + info = (struct jumpshot_info *) (us->extra); + + if (srb->cmnd[0] == INQUIRY) { + US_DEBUGP("jumpshot_transport: INQUIRY. Returning bogus response.\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + + rc = jumpshot_get_status(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + rc = jumpshot_id_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("jumpshot_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + US_DEBUGP("jumpshot_transport: Gah! MODE_SELECT_10.\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("jumpshot_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + return jumpshot_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // I don't think we'll ever see a READ_12 but support it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("jumpshot_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + return jumpshot_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("jumpshot_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + return jumpshot_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // I don't think we'll ever see a WRITE_12 but support it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("jumpshot_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + return jumpshot_write_data(us, info, block, blocks); + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + US_DEBUGP("jumpshot_transport: TEST_UNIT_READY.\n"); + return jumpshot_get_status(us); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("jumpshot_transport: REQUEST_SENSE.\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE) { + US_DEBUGP("jumpshot_transport: MODE_SENSE_6 detected\n"); + return jumpshot_handle_mode_sense(us, srb, 1); + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + US_DEBUGP("jumpshot_transport: MODE_SENSE_10 detected\n"); + return jumpshot_handle_mode_sense(us, srb, 0); + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from popping + // the media out of the device (no locking doors, etc) + // + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + /* this is used by sd.c'check_scsidisk_media_change to detect + media change */ + US_DEBUGP("jumpshot_transport: START_STOP.\n"); + /* the first jumpshot_id_device after a media change returns + an error (determined experimentally) */ + rc = jumpshot_id_device(us, info); + if (rc == USB_STOR_TRANSPORT_GOOD) { + info->sense_key = NO_SENSE; + srb->result = SUCCESS; + } else { + info->sense_key = UNIT_ATTENTION; + srb->result = SAM_STAT_CHECK_CONDITION; + } + return rc; + } + + US_DEBUGP("jumpshot_transport: Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h new file mode 100644 index 000000000000..19bac9d1558f --- /dev/null +++ b/drivers/usb/storage/jumpshot.h @@ -0,0 +1,39 @@ +/* Driver for Lexar "Jumpshot" USB Compact Flash reader + * Header File + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) + * + * See jumpshot.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_JUMPSHOT_H +#define _USB_JUMPSHOT_H + +extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us); + +struct jumpshot_info { + unsigned long sectors; // total sector count + unsigned long ssize; // sector size in bytes + + // the following aren't used yet + unsigned char sense_key; + unsigned long sense_asc; // additional sense code + unsigned long sense_ascq; // additional sense code qualifier +}; + +#endif diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c new file mode 100644 index 000000000000..9ad30428d2dd --- /dev/null +++ b/drivers/usb/storage/protocol.c @@ -0,0 +1,254 @@ +/* Driver for USB Mass Storage compliant devices + * + * $Id: protocol.c,v 1.14 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2002 Alan Stern (stern@rowland.org) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/highmem.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "protocol.h" +#include "debug.h" +#include "scsiglue.h" +#include "transport.h" + +/*********************************************************************** + * Protocol routines + ***********************************************************************/ + +void usb_stor_qic157_command(struct scsi_cmnd *srb, struct us_data *us) +{ + /* Pad the ATAPI command with zeros + * + * NOTE: This only works because a scsi_cmnd struct field contains + * a unsigned char cmnd[16], so we know we have storage available + */ + for (; srb->cmd_len<12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + /* set command length to 12 bytes */ + srb->cmd_len = 12; + + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + +void usb_stor_ATAPI_command(struct scsi_cmnd *srb, struct us_data *us) +{ + /* Pad the ATAPI command with zeros + * + * NOTE: This only works because a scsi_cmnd struct field contains + * a unsigned char cmnd[16], so we know we have storage available + */ + + /* Pad the ATAPI command with zeros */ + for (; srb->cmd_len<12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + /* set command length to 12 bytes */ + srb->cmd_len = 12; + + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + + +void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us) +{ + /* fix some commands -- this is a form of mode translation + * UFI devices only accept 12 byte long commands + * + * NOTE: This only works because a scsi_cmnd struct field contains + * a unsigned char cmnd[16], so we know we have storage available + */ + + /* Pad the ATAPI command with zeros */ + for (; srb->cmd_len<12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + /* set command length to 12 bytes (this affects the transport layer) */ + srb->cmd_len = 12; + + /* XXX We should be constantly re-evaluating the need for these */ + + /* determine the correct data length for these commands */ + switch (srb->cmnd[0]) { + + /* for INQUIRY, UFI devices only ever return 36 bytes */ + case INQUIRY: + srb->cmnd[4] = 36; + break; + + /* again, for MODE_SENSE_10, we get the minimum (8) */ + case MODE_SENSE_10: + srb->cmnd[7] = 0; + srb->cmnd[8] = 8; + break; + + /* for REQUEST_SENSE, UFI devices only ever return 18 bytes */ + case REQUEST_SENSE: + srb->cmnd[4] = 18; + break; + } /* end switch on cmnd[0] */ + + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + +void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, + struct us_data *us) +{ + /* send the command to the transport layer */ + usb_stor_invoke_transport(srb, us); +} + +/*********************************************************************** + * Scatter-gather transfer buffer access routines + ***********************************************************************/ + +/* Copy a buffer of length buflen to/from the srb's transfer buffer. + * (Note: for scatter-gather transfers (srb->use_sg > 0), srb->request_buffer + * points to a list of s-g entries and we ignore srb->request_bufflen. + * For non-scatter-gather transfers, srb->request_buffer points to the + * transfer buffer itself and srb->request_bufflen is the buffer's length.) + * Update the *index and *offset variables so that the next copy will + * pick up from where this one left off. */ + +unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb, unsigned int *index, + unsigned int *offset, enum xfer_buf_dir dir) +{ + unsigned int cnt; + + /* If not using scatter-gather, just transfer the data directly. + * Make certain it will fit in the available buffer space. */ + if (srb->use_sg == 0) { + if (*offset >= srb->request_bufflen) + return 0; + cnt = min(buflen, srb->request_bufflen - *offset); + if (dir == TO_XFER_BUF) + memcpy((unsigned char *) srb->request_buffer + *offset, + buffer, cnt); + else + memcpy(buffer, (unsigned char *) srb->request_buffer + + *offset, cnt); + *offset += cnt; + + /* Using scatter-gather. We have to go through the list one entry + * at a time. Each s-g entry contains some number of pages, and + * each page has to be kmap()'ed separately. If the page is already + * in kernel-addressable memory then kmap() will return its address. + * If the page is not directly accessible -- such as a user buffer + * located in high memory -- then kmap() will map it to a temporary + * position in the kernel's virtual address space. */ + } else { + struct scatterlist *sg = + (struct scatterlist *) srb->request_buffer + + *index; + + /* This loop handles a single s-g list entry, which may + * include multiple pages. Find the initial page structure + * and the starting offset within the page, and update + * the *offset and *index values for the next loop. */ + cnt = 0; + while (cnt < buflen && *index < srb->use_sg) { + struct page *page = sg->page + + ((sg->offset + *offset) >> PAGE_SHIFT); + unsigned int poff = + (sg->offset + *offset) & (PAGE_SIZE-1); + unsigned int sglen = sg->length - *offset; + + if (sglen > buflen - cnt) { + + /* Transfer ends within this s-g entry */ + sglen = buflen - cnt; + *offset += sglen; + } else { + + /* Transfer continues to next s-g entry */ + *offset = 0; + ++*index; + ++sg; + } + + /* Transfer the data for all the pages in this + * s-g entry. For each page: call kmap(), do the + * transfer, and call kunmap() immediately after. */ + while (sglen > 0) { + unsigned int plen = min(sglen, (unsigned int) + PAGE_SIZE - poff); + unsigned char *ptr = kmap(page); + + if (dir == TO_XFER_BUF) + memcpy(ptr + poff, buffer + cnt, plen); + else + memcpy(buffer + cnt, ptr + poff, plen); + kunmap(page); + + /* Start at the beginning of the next page */ + poff = 0; + ++page; + cnt += plen; + sglen -= plen; + } + } + } + + /* Return the amount actually transferred */ + return cnt; +} + +/* Store the contents of buffer into srb's transfer buffer and set the + * SCSI residue. */ +void usb_stor_set_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb) +{ + unsigned int index = 0, offset = 0; + + usb_stor_access_xfer_buf(buffer, buflen, srb, &index, &offset, + TO_XFER_BUF); + if (buflen < srb->request_bufflen) + srb->resid = srb->request_bufflen - buflen; +} diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h new file mode 100644 index 000000000000..02bff01ab09c --- /dev/null +++ b/drivers/usb/storage/protocol.h @@ -0,0 +1,74 @@ +/* Driver for USB Mass Storage compliant devices + * Protocol Functions Header File + * + * $Id: protocol.h,v 1.4 2001/02/13 07:10:03 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _PROTOCOL_H_ +#define _PROTOCOL_H_ + +/* Sub Classes */ + +#define US_SC_RBC 0x01 /* Typically, flash devices */ +#define US_SC_8020 0x02 /* CD-ROM */ +#define US_SC_QIC 0x03 /* QIC-157 Tapes */ +#define US_SC_UFI 0x04 /* Floppy */ +#define US_SC_8070 0x05 /* Removable media */ +#define US_SC_SCSI 0x06 /* Transparent */ +#define US_SC_ISD200 0x07 /* ISD200 ATA */ +#define US_SC_MIN US_SC_RBC +#define US_SC_MAX US_SC_ISD200 + +#define US_SC_DEVICE 0xff /* Use device's value */ + +/* Protocol handling routines */ +extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*); +extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*); +extern void usb_stor_ufi_command(struct scsi_cmnd*, struct us_data*); +extern void usb_stor_transparent_scsi_command(struct scsi_cmnd*, + struct us_data*); + +/* struct scsi_cmnd transfer buffer access utilities */ +enum xfer_buf_dir {TO_XFER_BUF, FROM_XFER_BUF}; + +extern unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb, unsigned int *index, + unsigned int *offset, enum xfer_buf_dir dir); + +extern void usb_stor_set_xfer_buf(unsigned char *buffer, + unsigned int buflen, struct scsi_cmnd *srb); +#endif diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c new file mode 100644 index 000000000000..22e48a2b0bd1 --- /dev/null +++ b/drivers/usb/storage/scsiglue.c @@ -0,0 +1,500 @@ +/* Driver for USB Mass Storage compliant devices + * SCSI layer glue code + * + * $Id: scsiglue.c,v 1.26 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/slab.h> +#include <linux/module.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_devinfo.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_eh.h> + +#include "usb.h" +#include "scsiglue.h" +#include "debug.h" +#include "transport.h" +#include "protocol.h" + +/*********************************************************************** + * Host functions + ***********************************************************************/ + +static const char* host_info(struct Scsi_Host *host) +{ + return "SCSI emulation for USB Mass Storage devices"; +} + +static int slave_alloc (struct scsi_device *sdev) +{ + /* + * Set the INQUIRY transfer length to 36. We don't use any of + * the extra data and many devices choke if asked for more or + * less than 36 bytes. + */ + sdev->inquiry_len = 36; + return 0; +} + +static int slave_configure(struct scsi_device *sdev) +{ + struct us_data *us = host_to_us(sdev->host); + + /* Scatter-gather buffers (all but the last) must have a length + * divisible by the bulk maxpacket size. Otherwise a data packet + * would end up being short, causing a premature end to the data + * transfer. Since high-speed bulk pipes have a maxpacket size + * of 512, we'll use that as the scsi device queue's DMA alignment + * mask. Guaranteeing proper alignment of the first buffer will + * have the desired effect because, except at the beginning and + * the end, scatter-gather buffers follow page boundaries. */ + blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); + + /* Set the SCSI level to at least 2. We'll leave it at 3 if that's + * what is originally reported. We need this to avoid confusing + * the SCSI layer with devices that report 0 or 1, but need 10-byte + * commands (ala ATAPI devices behind certain bridges, or devices + * which simply have broken INQUIRY data). + * + * NOTE: This means /dev/sg programs (ala cdrecord) will get the + * actual information. This seems to be the preference for + * programs like that. + * + * NOTE: This also means that /proc/scsi/scsi and sysfs may report + * the actual value or the modified one, depending on where the + * data comes from. + */ + if (sdev->scsi_level < SCSI_2) + sdev->scsi_level = SCSI_2; + + /* According to the technical support people at Genesys Logic, + * devices using their chips have problems transferring more than + * 32 KB at a time. In practice people have found that 64 KB + * works okay and that's what Windows does. But we'll be + * conservative; people can always use the sysfs interface to + * increase max_sectors. */ + if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS && + sdev->request_queue->max_sectors > 64) + blk_queue_max_sectors(sdev->request_queue, 64); + + /* We can't put these settings in slave_alloc() because that gets + * called before the device type is known. Consequently these + * settings can't be overridden via the scsi devinfo mechanism. */ + if (sdev->type == TYPE_DISK) { + + /* Disk-type devices use MODE SENSE(6) if the protocol + * (SubClass) is Transparent SCSI, otherwise they use + * MODE SENSE(10). */ + if (us->subclass != US_SC_SCSI) + sdev->use_10_for_ms = 1; + + /* Many disks only accept MODE SENSE transfer lengths of + * 192 bytes (that's what Windows uses). */ + sdev->use_192_bytes_for_3f = 1; + + /* Some devices don't like MODE SENSE with page=0x3f, + * which is the command used for checking if a device + * is write-protected. Now that we tell the sd driver + * to do a 192-byte transfer with this command the + * majority of devices work fine, but a few still can't + * handle it. The sd driver will simply assume those + * devices are write-enabled. */ + if (us->flags & US_FL_NO_WP_DETECT) + sdev->skip_ms_page_3f = 1; + + /* A number of devices have problems with MODE SENSE for + * page x08, so we will skip it. */ + sdev->skip_ms_page_8 = 1; + + /* Some disks return the total number of blocks in response + * to READ CAPACITY rather than the highest block number. + * If this device makes that mistake, tell the sd driver. */ + if (us->flags & US_FL_FIX_CAPACITY) + sdev->fix_capacity = 1; + } else { + + /* Non-disk-type devices don't need to blacklist any pages + * or to force 192-byte transfer lengths for MODE SENSE. + * But they do need to use MODE SENSE(10). */ + sdev->use_10_for_ms = 1; + } + + /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM + * REMOVAL command, so suppress those commands. */ + if (us->flags & US_FL_NOT_LOCKABLE) + sdev->lockable = 0; + + /* this is to satisfy the compiler, tho I don't think the + * return code is ever checked anywhere. */ + return 0; +} + +/* queue a command */ +/* This is always called with scsi_lock(host) held */ +static int queuecommand(struct scsi_cmnd *srb, + void (*done)(struct scsi_cmnd *)) +{ + struct us_data *us = host_to_us(srb->device->host); + + US_DEBUGP("%s called\n", __FUNCTION__); + + /* check for state-transition errors */ + if (us->srb != NULL) { + printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", + __FUNCTION__, us->srb); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* fail the command if we are disconnecting */ + if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + US_DEBUGP("Fail command during disconnect\n"); + srb->result = DID_NO_CONNECT << 16; + done(srb); + return 0; + } + + /* enqueue the command and wake up the control thread */ + srb->scsi_done = done; + us->srb = srb; + up(&(us->sema)); + + return 0; +} + +/*********************************************************************** + * Error handling functions + ***********************************************************************/ + +/* Command timeout and abort */ +/* This is always called with scsi_lock(host) held */ +static int command_abort(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + + US_DEBUGP("%s called\n", __FUNCTION__); + + /* Is this command still active? */ + if (us->srb != srb) { + US_DEBUGP ("-- nothing to abort\n"); + return FAILED; + } + + /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if + * a device reset isn't already in progress (to avoid interfering + * with the reset). To prevent races with auto-reset, we must + * stop any ongoing USB transfers while still holding the host + * lock. */ + set_bit(US_FLIDX_TIMED_OUT, &us->flags); + if (!test_bit(US_FLIDX_RESETTING, &us->flags)) { + set_bit(US_FLIDX_ABORTING, &us->flags); + usb_stor_stop_transport(us); + } + scsi_unlock(us_to_host(us)); + + /* Wait for the aborted command to finish */ + wait_for_completion(&us->notify); + + /* Reacquire the lock and allow USB transfers to resume */ + scsi_lock(us_to_host(us)); + clear_bit(US_FLIDX_ABORTING, &us->flags); + clear_bit(US_FLIDX_TIMED_OUT, &us->flags); + return SUCCESS; +} + +/* This invokes the transport reset mechanism to reset the state of the + * device */ +/* This is always called with scsi_lock(host) held */ +static int device_reset(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + int result; + + US_DEBUGP("%s called\n", __FUNCTION__); + + scsi_unlock(us_to_host(us)); + + /* lock the device pointers and do the reset */ + down(&(us->dev_semaphore)); + if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + result = FAILED; + US_DEBUGP("No reset during disconnect\n"); + } else + result = us->transport_reset(us); + up(&(us->dev_semaphore)); + + /* lock the host for the return */ + scsi_lock(us_to_host(us)); + return result; +} + +/* This resets the device's USB port. */ +/* It refuses to work if there's more than one interface in + * the device, so that other users are not affected. */ +/* This is always called with scsi_lock(host) held */ +static int bus_reset(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + int result, rc; + + US_DEBUGP("%s called\n", __FUNCTION__); + + scsi_unlock(us_to_host(us)); + + /* The USB subsystem doesn't handle synchronisation between + * a device's several drivers. Therefore we reset only devices + * with just one interface, which we of course own. */ + + down(&(us->dev_semaphore)); + if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + result = -EIO; + US_DEBUGP("No reset during disconnect\n"); + } else if (us->pusb_dev->actconfig->desc.bNumInterfaces != 1) { + result = -EBUSY; + US_DEBUGP("Refusing to reset a multi-interface device\n"); + } else { + rc = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); + if (rc < 0) { + US_DEBUGP("unable to lock device for reset: %d\n", rc); + result = rc; + } else { + result = usb_reset_device(us->pusb_dev); + if (rc) + usb_unlock_device(us->pusb_dev); + US_DEBUGP("usb_reset_device returns %d\n", result); + } + } + up(&(us->dev_semaphore)); + + /* lock the host for the return */ + scsi_lock(us_to_host(us)); + return result < 0 ? FAILED : SUCCESS; +} + +/* Report a driver-initiated device reset to the SCSI layer. + * Calling this for a SCSI-initiated reset is unnecessary but harmless. + * The caller must own the SCSI host lock. */ +void usb_stor_report_device_reset(struct us_data *us) +{ + int i; + struct Scsi_Host *host = us_to_host(us); + + scsi_report_device_reset(host, 0, 0); + if (us->flags & US_FL_SCM_MULT_TARG) { + for (i = 1; i < host->max_id; ++i) + scsi_report_device_reset(host, 0, i); + } +} + +/*********************************************************************** + * /proc/scsi/ functions + ***********************************************************************/ + +/* we use this macro to help us write into the buffer */ +#undef SPRINTF +#define SPRINTF(args...) \ + do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0) + +static int proc_info (struct Scsi_Host *host, char *buffer, + char **start, off_t offset, int length, int inout) +{ + struct us_data *us = host_to_us(host); + char *pos = buffer; + const char *string; + + /* if someone is sending us data, just throw it away */ + if (inout) + return length; + + /* print the controller name */ + SPRINTF(" Host scsi%d: usb-storage\n", host->host_no); + + /* print product, vendor, and serial number strings */ + if (us->pusb_dev->manufacturer) + string = us->pusb_dev->manufacturer; + else if (us->unusual_dev->vendorName) + string = us->unusual_dev->vendorName; + else + string = "Unknown"; + SPRINTF(" Vendor: %s\n", string); + if (us->pusb_dev->product) + string = us->pusb_dev->product; + else if (us->unusual_dev->productName) + string = us->unusual_dev->productName; + else + string = "Unknown"; + SPRINTF(" Product: %s\n", string); + if (us->pusb_dev->serial) + string = us->pusb_dev->serial; + else + string = "None"; + SPRINTF("Serial Number: %s\n", string); + + /* show the protocol and transport */ + SPRINTF(" Protocol: %s\n", us->protocol_name); + SPRINTF(" Transport: %s\n", us->transport_name); + + /* show the device flags */ + if (pos < buffer + length) { + pos += sprintf(pos, " Quirks:"); + +#define US_FLAG(name, value) \ + if (us->flags & value) pos += sprintf(pos, " " #name); +US_DO_ALL_FLAGS +#undef US_FLAG + + *(pos++) = '\n'; + } + + /* + * Calculate start of next buffer, and return value. + */ + *start = buffer + offset; + + if ((pos - buffer) < offset) + return (0); + else if ((pos - buffer - offset) < length) + return (pos - buffer - offset); + else + return (length); +} + +/*********************************************************************** + * Sysfs interface + ***********************************************************************/ + +/* Output routine for the sysfs max_sectors file */ +static ssize_t show_max_sectors(struct device *dev, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return sprintf(buf, "%u\n", sdev->request_queue->max_sectors); +} + +/* Input routine for the sysfs max_sectors file */ +static ssize_t store_max_sectors(struct device *dev, const char *buf, + size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + unsigned short ms; + + if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) { + blk_queue_max_sectors(sdev->request_queue, ms); + return strlen(buf); + } + return -EINVAL; +} + +static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors, + store_max_sectors); + +static struct device_attribute *sysfs_device_attr_list[] = { + &dev_attr_max_sectors, + NULL, + }; + +/* + * this defines our host template, with which we'll allocate hosts + */ + +struct scsi_host_template usb_stor_host_template = { + /* basic userland interface stuff */ + .name = "usb-storage", + .proc_name = "usb-storage", + .proc_info = proc_info, + .info = host_info, + + /* command interface -- queued only */ + .queuecommand = queuecommand, + + /* error and abort handlers */ + .eh_abort_handler = command_abort, + .eh_device_reset_handler = device_reset, + .eh_bus_reset_handler = bus_reset, + + /* queue commands only, only one command per LUN */ + .can_queue = 1, + .cmd_per_lun = 1, + + /* unknown initiator id */ + .this_id = -1, + + .slave_alloc = slave_alloc, + .slave_configure = slave_configure, + + /* lots of sg segments can be handled */ + .sg_tablesize = SG_ALL, + + /* limit the total size of a transfer to 120 KB */ + .max_sectors = 240, + + /* merge commands... this seems to help performance, but + * periodically someone should test to see which setting is more + * optimal. + */ + .use_clustering = 1, + + /* emulated HBA */ + .emulated = 1, + + /* we do our own delay after a device or bus reset */ + .skip_settle_delay = 1, + + /* sysfs device attributes */ + .sdev_attrs = sysfs_device_attr_list, + + /* module management */ + .module = THIS_MODULE +}; + +/* To Report "Illegal Request: Invalid Field in CDB */ +unsigned char usb_stor_sense_invalidCDB[18] = { + [0] = 0x70, /* current error */ + [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */ + [7] = 0x0a, /* additional length */ + [12] = 0x24 /* Invalid Field in CDB */ +}; + diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h new file mode 100644 index 000000000000..d0a49af026c4 --- /dev/null +++ b/drivers/usb/storage/scsiglue.h @@ -0,0 +1,49 @@ +/* Driver for USB Mass Storage compliant devices + * SCSI Connecting Glue Header File + * + * $Id: scsiglue.h,v 1.4 2000/08/25 00:13:51 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SCSIGLUE_H_ +#define _SCSIGLUE_H_ + +extern void usb_stor_report_device_reset(struct us_data *us); + +extern unsigned char usb_stor_sense_invalidCDB[18]; +extern struct scsi_host_template usb_stor_host_template; + +#endif diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c new file mode 100644 index 000000000000..0ea2f5ab66ba --- /dev/null +++ b/drivers/usb/storage/sddr09.c @@ -0,0 +1,1608 @@ +/* Driver for SanDisk SDDR-09 SmartMedia reader + * + * $Id: sddr09.c,v 1.24 2002/04/22 03:39:43 mdharm Exp $ + * (c) 2000, 2001 Robert Baruch (autophile@starband.net) + * (c) 2002 Andries Brouwer (aeb@cwi.nl) + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip. + * This chip is a programmable USB controller. In the SDDR-09, it has + * been programmed to obey a certain limited set of SCSI commands. + * This driver translates the "real" SCSI commands to the SDDR-09 SCSI + * commands. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Known vendor commands: 12 bytes, first byte is opcode + * + * E7: read scatter gather + * E8: read + * E9: write + * EA: erase + * EB: reset + * EC: read status + * ED: read ID + * EE: write CIS (?) + * EF: compute checksum (?) + */ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "sddr09.h" + + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +/* #define US_DEBUGP printk */ + +/* + * First some stuff that does not belong here: + * data on SmartMedia and other cards, completely + * unrelated to this driver. + * Similar stuff occurs in <linux/mtd/nand_ids.h>. + */ + +struct nand_flash_dev { + int model_id; + int chipshift; /* 1<<cs bytes total capacity */ + char pageshift; /* 1<<ps bytes in a page */ + char blockshift; /* 1<<bs pages in an erase block */ + char zoneshift; /* 1<<zs blocks in a zone */ + /* # of logical blocks is 125/128 of this */ + char pageadrlen; /* length of an address in bytes - 1 */ +}; + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_AMD 0x01 +#define NAND_MFR_NATSEMI 0x8f +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec + +static inline char *nand_flash_manufacturer(int manuf_id) { + switch(manuf_id) { + case NAND_MFR_AMD: + return "AMD"; + case NAND_MFR_NATSEMI: + return "NATSEMI"; + case NAND_MFR_TOSHIBA: + return "Toshiba"; + case NAND_MFR_SAMSUNG: + return "Samsung"; + default: + return "unknown"; + } +} + +/* + * It looks like it is unnecessary to attach manufacturer to the + * remaining data: SSFDC prescribes manufacturer-independent id codes. + * + * 256 MB NAND flash has a 5-byte ID with 2nd byte 0xaa, 0xba, 0xca or 0xda. + */ + +static struct nand_flash_dev nand_flash_ids[] = { + /* NAND flash */ + { 0x6e, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0xe8, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0xec, 20, 8, 4, 8, 2}, /* 1 MB */ + { 0x64, 21, 8, 4, 9, 2}, /* 2 MB */ + { 0xea, 21, 8, 4, 9, 2}, /* 2 MB */ + { 0x6b, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe3, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe5, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xe6, 23, 9, 4, 10, 2}, /* 8 MB */ + { 0x73, 24, 9, 5, 10, 2}, /* 16 MB */ + { 0x75, 25, 9, 5, 10, 2}, /* 32 MB */ + { 0x76, 26, 9, 5, 10, 3}, /* 64 MB */ + { 0x79, 27, 9, 5, 10, 3}, /* 128 MB */ + + /* MASK ROM */ + { 0x5d, 21, 9, 4, 8, 2}, /* 2 MB */ + { 0xd5, 22, 9, 4, 9, 2}, /* 4 MB */ + { 0xd6, 23, 9, 4, 10, 2}, /* 8 MB */ + { 0x57, 24, 9, 4, 11, 2}, /* 16 MB */ + { 0x58, 25, 9, 4, 12, 2}, /* 32 MB */ + { 0,} +}; + +#define SIZE(a) (sizeof(a)/sizeof((a)[0])) + +static struct nand_flash_dev * +nand_find_id(unsigned char id) { + int i; + + for (i = 0; i < SIZE(nand_flash_ids); i++) + if (nand_flash_ids[i].model_id == id) + return &(nand_flash_ids[i]); + return NULL; +} + +/* + * ECC computation. + */ +static unsigned char parity[256]; +static unsigned char ecc2[256]; + +static void nand_init_ecc(void) { + int i, j, a; + + parity[0] = 0; + for (i = 1; i < 256; i++) + parity[i] = (parity[i&(i-1)] ^ 1); + + for (i = 0; i < 256; i++) { + a = 0; + for (j = 0; j < 8; j++) { + if (i & (1<<j)) { + if ((j & 1) == 0) + a ^= 0x04; + if ((j & 2) == 0) + a ^= 0x10; + if ((j & 4) == 0) + a ^= 0x40; + } + } + ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); + } +} + +/* compute 3-byte ecc on 256 bytes */ +static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) { + int i, j, a; + unsigned char par, bit, bits[8]; + + par = 0; + for (j = 0; j < 8; j++) + bits[j] = 0; + + /* collect 16 checksum bits */ + for (i = 0; i < 256; i++) { + par ^= data[i]; + bit = parity[data[i]]; + for (j = 0; j < 8; j++) + if ((i & (1<<j)) == 0) + bits[j] ^= bit; + } + + /* put 4+4+4 = 12 bits in the ecc */ + a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; + ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; + ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); + + ecc[2] = ecc2[par]; +} + +static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) { + return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); +} + +static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { + memcpy(data, ecc, 3); +} + +/* + * The actual driver starts here. + */ + +/* + * On my 16MB card, control blocks have size 64 (16 real control bytes, + * and 48 junk bytes). In reality of course the card uses 16 control bytes, + * so the reader makes up the remaining 48. Don't know whether these numbers + * depend on the card. For now a constant. + */ +#define CONTROL_SHIFT 6 + +/* + * On my Combo CF/SM reader, the SM reader has LUN 1. + * (and things fail with LUN 0). + * It seems LUN is irrelevant for others. + */ +#define LUN 1 +#define LUNBITS (LUN << 5) + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffffffff +#define SPARE 0xfffffffe +#define UNUSABLE 0xfffffffd + +static int erase_bad_lba_entries = 0; + +/* send vendor interface command (0x41) */ +/* called for requests 0, 1, 8 */ +static int +sddr09_send_command(struct us_data *us, + unsigned char request, + unsigned char direction, + unsigned char *xfer_data, + unsigned int xfer_len) { + unsigned int pipe; + unsigned char requesttype = (0x41 | direction); + int rc; + + // Get the receive or send control pipe number + + if (direction == USB_DIR_IN) + pipe = us->recv_ctrl_pipe; + else + pipe = us->send_ctrl_pipe; + + rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype, + 0, 0, xfer_data, xfer_len); + return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); +} + +static int +sddr09_send_scsi_command(struct us_data *us, + unsigned char *command, + unsigned int command_len) { + return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len); +} + +#if 0 +/* + * Test Unit Ready Command: 12 bytes. + * byte 0: opcode: 00 + */ +static int +sddr09_test_unit_ready(struct us_data *us) { + unsigned char *command = us->iobuf; + int result; + + memset(command, 0, 6); + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 6); + + US_DEBUGP("sddr09_test_unit_ready returns %d\n", result); + + return result; +} +#endif + +/* + * Request Sense Command: 12 bytes. + * byte 0: opcode: 03 + * byte 4: data length + */ +static int +sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) { + unsigned char *command = us->iobuf; + int result; + + memset(command, 0, 12); + command[0] = 0x03; + command[1] = LUNBITS; + command[4] = buflen; + + result = sddr09_send_scsi_command(us, command, 12); + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("request sense failed\n"); + return result; + } + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + sensebuf, buflen, NULL); + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("request sense bulk in failed\n"); + return USB_STOR_TRANSPORT_ERROR; + } else { + US_DEBUGP("request sense worked\n"); + return USB_STOR_TRANSPORT_GOOD; + } +} + +/* + * Read Command: 12 bytes. + * byte 0: opcode: E8 + * byte 1: last two bits: 00: read data, 01: read blockwise control, + * 10: read both, 11: read pagewise control. + * It turns out we need values 20, 21, 22, 23 here (LUN 1). + * bytes 2-5: address (interpretation depends on byte 1, see below) + * bytes 10-11: count (idem) + * + * A page has 512 data bytes and 64 control bytes (16 control and 48 junk). + * A read data command gets data in 512-byte pages. + * A read control command gets control in 64-byte chunks. + * A read both command gets data+control in 576-byte chunks. + * + * Blocks are groups of 32 pages, and read blockwise control jumps to the + * next block, while read pagewise control jumps to the next page after + * reading a group of 64 control bytes. + * [Here 512 = 1<<pageshift, 32 = 1<<blockshift, 64 is constant?] + * + * (1 MB and 2 MB cards are a bit different, but I have only a 16 MB card.) + */ + +static int +sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, + int nr_of_pages, int bulklen, unsigned char *buf, + int use_sg) { + + unsigned char *command = us->iobuf; + int result; + + command[0] = 0xE8; + command[1] = LUNBITS | x; + command[2] = MSB_of(fromaddress>>16); + command[3] = LSB_of(fromaddress>>16); + command[4] = MSB_of(fromaddress & 0xFFFF); + command[5] = LSB_of(fromaddress & 0xFFFF); + command[6] = 0; + command[7] = 0; + command[8] = 0; + command[9] = 0; + command[10] = MSB_of(nr_of_pages); + command[11] = LSB_of(nr_of_pages); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", + x, result); + return result; + } + + result = usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, + buf, bulklen, use_sg, NULL); + + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", + x, result); + return USB_STOR_TRANSPORT_ERROR; + } + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read Data + * + * fromaddress counts data shorts: + * increasing it by 256 shifts the bytestream by 512 bytes; + * the last 8 bits are ignored. + * + * nr_of_pages counts pages of size (1 << pageshift). + */ +static int +sddr09_read20(struct us_data *us, unsigned long fromaddress, + int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { + int bulklen = nr_of_pages << pageshift; + + /* The last 8 bits of fromaddress are ignored. */ + return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen, + buf, use_sg); +} + +/* + * Read Blockwise Control + * + * fromaddress gives the starting position (as in read data; + * the last 8 bits are ignored); increasing it by 32*256 shifts + * the output stream by 64 bytes. + * + * count counts control groups of size (1 << controlshift). + * For me, controlshift = 6. Is this constant? + * + * After getting one control group, jump to the next block + * (fromaddress += 8192). + */ +static int +sddr09_read21(struct us_data *us, unsigned long fromaddress, + int count, int controlshift, unsigned char *buf, int use_sg) { + + int bulklen = (count << controlshift); + return sddr09_readX(us, 1, fromaddress, count, bulklen, + buf, use_sg); +} + +/* + * Read both Data and Control + * + * fromaddress counts data shorts, ignoring control: + * increasing it by 256 shifts the bytestream by 576 = 512+64 bytes; + * the last 8 bits are ignored. + * + * nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift). + */ +static int +sddr09_read22(struct us_data *us, unsigned long fromaddress, + int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { + + int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); + US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", + nr_of_pages, bulklen); + return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen, + buf, use_sg); +} + +#if 0 +/* + * Read Pagewise Control + * + * fromaddress gives the starting position (as in read data; + * the last 8 bits are ignored); increasing it by 256 shifts + * the output stream by 64 bytes. + * + * count counts control groups of size (1 << controlshift). + * For me, controlshift = 6. Is this constant? + * + * After getting one control group, jump to the next page + * (fromaddress += 256). + */ +static int +sddr09_read23(struct us_data *us, unsigned long fromaddress, + int count, int controlshift, unsigned char *buf, int use_sg) { + + int bulklen = (count << controlshift); + return sddr09_readX(us, 3, fromaddress, count, bulklen, + buf, use_sg); +} +#endif + +/* + * Erase Command: 12 bytes. + * byte 0: opcode: EA + * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). + * + * Always precisely one block is erased; bytes 2-5 and 10-11 are ignored. + * The byte address being erased is 2*Eaddress. + * The CIS cannot be erased. + */ +static int +sddr09_erase(struct us_data *us, unsigned long Eaddress) { + unsigned char *command = us->iobuf; + int result; + + US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); + + memset(command, 0, 12); + command[0] = 0xEA; + command[1] = LUNBITS; + command[6] = MSB_of(Eaddress>>16); + command[7] = LSB_of(Eaddress>>16); + command[8] = MSB_of(Eaddress & 0xFFFF); + command[9] = LSB_of(Eaddress & 0xFFFF); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result != USB_STOR_TRANSPORT_GOOD) + US_DEBUGP("Result for send_control in sddr09_erase %d\n", + result); + + return result; +} + +/* + * Write CIS Command: 12 bytes. + * byte 0: opcode: EE + * bytes 2-5: write address in shorts + * bytes 10-11: sector count + * + * This writes at the indicated address. Don't know how it differs + * from E9. Maybe it does not erase? However, it will also write to + * the CIS. + * + * When two such commands on the same page follow each other directly, + * the second one is not done. + */ + +/* + * Write Command: 12 bytes. + * byte 0: opcode: E9 + * bytes 2-5: write address (big-endian, counting shorts, sector aligned). + * bytes 6-9: erase address (big-endian, counting shorts, sector aligned). + * bytes 10-11: sector count (big-endian, in 512-byte sectors). + * + * If write address equals erase address, the erase is done first, + * otherwise the write is done first. When erase address equals zero + * no erase is done? + */ +static int +sddr09_writeX(struct us_data *us, + unsigned long Waddress, unsigned long Eaddress, + int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) { + + unsigned char *command = us->iobuf; + int result; + + command[0] = 0xE9; + command[1] = LUNBITS; + + command[2] = MSB_of(Waddress>>16); + command[3] = LSB_of(Waddress>>16); + command[4] = MSB_of(Waddress & 0xFFFF); + command[5] = LSB_of(Waddress & 0xFFFF); + + command[6] = MSB_of(Eaddress>>16); + command[7] = LSB_of(Eaddress>>16); + command[8] = MSB_of(Eaddress & 0xFFFF); + command[9] = LSB_of(Eaddress & 0xFFFF); + + command[10] = MSB_of(nr_of_pages); + command[11] = LSB_of(nr_of_pages); + + result = sddr09_send_scsi_command(us, command, 12); + + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("Result for send_control in sddr09_writeX %d\n", + result); + return result; + } + + result = usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, + buf, bulklen, use_sg, NULL); + + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", + result); + return USB_STOR_TRANSPORT_ERROR; + } + return USB_STOR_TRANSPORT_GOOD; +} + +/* erase address, write same address */ +static int +sddr09_write_inplace(struct us_data *us, unsigned long address, + int nr_of_pages, int pageshift, unsigned char *buf, + int use_sg) { + int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); + return sddr09_writeX(us, address, address, nr_of_pages, bulklen, + buf, use_sg); +} + +#if 0 +/* + * Read Scatter Gather Command: 3+4n bytes. + * byte 0: opcode E7 + * byte 2: n + * bytes 4i-1,4i,4i+1: page address + * byte 4i+2: page count + * (i=1..n) + * + * This reads several pages from the card to a single memory buffer. + * The last two bits of byte 1 have the same meaning as for E8. + */ +static int +sddr09_read_sg_test_only(struct us_data *us) { + unsigned char *command = us->iobuf; + int result, bulklen, nsg, ct; + unsigned char *buf; + unsigned long address; + + nsg = bulklen = 0; + command[0] = 0xE7; + command[1] = LUNBITS; + command[2] = 0; + address = 040000; ct = 1; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + address = 0340000; ct = 1; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + address = 01000000; ct = 2; + nsg++; + bulklen += (ct << 9); + command[4*nsg+2] = ct; + command[4*nsg+1] = ((address >> 9) & 0xFF); + command[4*nsg+0] = ((address >> 17) & 0xFF); + command[4*nsg-1] = ((address >> 25) & 0xFF); + + command[2] = nsg; + + result = sddr09_send_scsi_command(us, command, 4*nsg+3); + + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", + result); + return result; + } + + buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO); + if (!buf) + return USB_STOR_TRANSPORT_ERROR; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + buf, bulklen, NULL); + kfree(buf); + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", + result); + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} +#endif + +/* + * Read Status Command: 12 bytes. + * byte 0: opcode: EC + * + * Returns 64 bytes, all zero except for the first. + * bit 0: 1: Error + * bit 5: 1: Suspended + * bit 6: 1: Ready + * bit 7: 1: Not write-protected + */ + +static int +sddr09_read_status(struct us_data *us, unsigned char *status) { + + unsigned char *command = us->iobuf; + unsigned char *data = us->iobuf; + int result; + + US_DEBUGP("Reading status...\n"); + + memset(command, 0, 12); + command[0] = 0xEC; + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 12); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 64, NULL); + *status = data[0]; + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); +} + +static int +sddr09_read_data(struct us_data *us, + unsigned long address, + unsigned int sectors) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned char *buffer; + unsigned int lba, maxlba, pba; + unsigned int page, pages; + unsigned int len, index, offset; + int result; + + // Since we only read in one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("sddr09_read_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + + // This could be made much more efficient by checking for + // contiguous LBA's. Another exercise left to the student. + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + + /* Find number of pages we can read in this block */ + pages = min(sectors, info->blocksize - page); + len = pages << info->pageshift; + + /* Not overflowing capacity? */ + if (lba >= maxlba) { + US_DEBUGP("Error: Requested lba %u exceeds " + "maximum %u\n", lba, maxlba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Find where this lba lives on disk */ + pba = info->lba_to_pba[lba]; + + if (pba == UNDEF) { /* this lba was never written */ + + US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); + + /* This is not really an error. It just means + that the block has never been written. + Instead of returning USB_STOR_TRANSPORT_ERROR + it is better to return all zero data. */ + + memset(buffer, 0, len); + + } else { + US_DEBUGP("Read %d pages, from PBA %d" + " (LBA %d) page %d\n", + pages, pba, lba, page); + + address = ((pba << info->blockshift) + page) << + info->pageshift; + + result = sddr09_read20(us, address>>1, + pages, info->pageshift, buffer, 0); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + } + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + return result; +} + +static unsigned int +sddr09_find_unused_pba(struct sddr09_card_info *info, unsigned int lba) { + static unsigned int lastpba = 1; + int zonestart, end, i; + + zonestart = (lba/1000) << 10; + end = info->capacity >> (info->blockshift + info->pageshift); + end -= zonestart; + if (end > 1024) + end = 1024; + + for (i = lastpba+1; i < end; i++) { + if (info->pba_to_lba[zonestart+i] == UNDEF) { + lastpba = i; + return zonestart+i; + } + } + for (i = 0; i <= lastpba; i++) { + if (info->pba_to_lba[zonestart+i] == UNDEF) { + lastpba = i; + return zonestart+i; + } + } + return 0; +} + +static int +sddr09_write_lba(struct us_data *us, unsigned int lba, + unsigned int page, unsigned int pages, + unsigned char *ptr, unsigned char *blockbuffer) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned long address; + unsigned int pba, lbap; + unsigned int pagelen; + unsigned char *bptr, *cptr, *xptr; + unsigned char ecc[3]; + int i, result, isnew; + + lbap = ((lba % 1000) << 1) | 0x1000; + if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) + lbap ^= 1; + pba = info->lba_to_pba[lba]; + isnew = 0; + + if (pba == UNDEF) { + pba = sddr09_find_unused_pba(info, lba); + if (!pba) { + printk("sddr09_write_lba: Out of unused blocks\n"); + return USB_STOR_TRANSPORT_ERROR; + } + info->pba_to_lba[pba] = lba; + info->lba_to_pba[lba] = pba; + isnew = 1; + } + + if (pba == 1) { + /* Maybe it is impossible to write to PBA 1. + Fake success, but don't do anything. */ + printk("sddr09: avoid writing to pba 1\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); + + /* read old contents */ + address = (pba << (info->pageshift + info->blockshift)); + result = sddr09_read22(us, address>>1, info->blocksize, + info->pageshift, blockbuffer, 0); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + /* check old contents and fill lba */ + for (i = 0; i < info->blocksize; i++) { + bptr = blockbuffer + i*pagelen; + cptr = bptr + info->pagesize; + nand_compute_ecc(bptr, ecc); + if (!nand_compare_ecc(cptr+13, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", + i, pba); + nand_store_ecc(cptr+13, ecc); + } + nand_compute_ecc(bptr+(info->pagesize / 2), ecc); + if (!nand_compare_ecc(cptr+8, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", + i, pba); + nand_store_ecc(cptr+8, ecc); + } + cptr[6] = cptr[11] = MSB_of(lbap); + cptr[7] = cptr[12] = LSB_of(lbap); + } + + /* copy in new stuff and compute ECC */ + xptr = ptr; + for (i = page; i < page+pages; i++) { + bptr = blockbuffer + i*pagelen; + cptr = bptr + info->pagesize; + memcpy(bptr, xptr, info->pagesize); + xptr += info->pagesize; + nand_compute_ecc(bptr, ecc); + nand_store_ecc(cptr+13, ecc); + nand_compute_ecc(bptr+(info->pagesize / 2), ecc); + nand_store_ecc(cptr+8, ecc); + } + + US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba); + + result = sddr09_write_inplace(us, address>>1, info->blocksize, + info->pageshift, blockbuffer, 0); + + US_DEBUGP("sddr09_write_inplace returns %d\n", result); + +#if 0 + { + unsigned char status = 0; + int result2 = sddr09_read_status(us, &status); + if (result2 != USB_STOR_TRANSPORT_GOOD) + US_DEBUGP("sddr09_write_inplace: cannot read status\n"); + else if (status != 0xc0) + US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", + status); + } +#endif + +#if 0 + { + int result2 = sddr09_test_unit_ready(us); + } +#endif + + return result; +} + +static int +sddr09_write_data(struct us_data *us, + unsigned long address, + unsigned int sectors) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + unsigned int lba, page, pages; + unsigned int pagelen, blocklen; + unsigned char *blockbuffer; + unsigned char *buffer; + unsigned int len, index, offset; + int result; + + // blockbuffer is used for reading in the old data, overwriting + // with the new data, and performing ECC calculations + + /* TODO: instead of doing kmalloc/kfree for each write, + add a bufferpointer to the info structure */ + + pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); + blocklen = (pagelen << info->blockshift); + blockbuffer = kmalloc(blocklen, GFP_NOIO); + if (!blockbuffer) { + printk("sddr09_write_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + // Since we don't write the user data directly to the device, + // we have to create a bounce buffer and move the data a piece + // at a time between the bounce buffer and the actual transfer buffer. + + len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("sddr09_write_data: Out of memory\n"); + kfree(blockbuffer); + return USB_STOR_TRANSPORT_ERROR; + } + + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + + // Write as many sectors as possible in this block + + pages = min(sectors, info->blocksize - page); + len = (pages << info->pageshift); + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, FROM_XFER_BUF); + + result = sddr09_write_lba(us, lba, page, pages, + buffer, blockbuffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + kfree(blockbuffer); + + return result; +} + +static int +sddr09_read_control(struct us_data *us, + unsigned long address, + unsigned int blocks, + unsigned char *content, + int use_sg) { + + US_DEBUGP("Read control address %lu, blocks %d\n", + address, blocks); + + return sddr09_read21(us, address, blocks, + CONTROL_SHIFT, content, use_sg); +} + +/* + * Read Device ID Command: 12 bytes. + * byte 0: opcode: ED + * + * Returns 2 bytes: Manufacturer ID and Device ID. + * On more recent cards 3 bytes: the third byte is an option code A5 + * signifying that the secret command to read an 128-bit ID is available. + * On still more recent cards 4 bytes: the fourth byte C0 means that + * a second read ID cmd is available. + */ +static int +sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { + unsigned char *command = us->iobuf; + unsigned char *content = us->iobuf; + int result, i; + + memset(command, 0, 12); + command[0] = 0xED; + command[1] = LUNBITS; + + result = sddr09_send_scsi_command(us, command, 12); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + content, 64, NULL); + + for (i = 0; i < 4; i++) + deviceID[i] = content[i]; + + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); +} + +static int +sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { + int result; + unsigned char status; + + result = sddr09_read_status(us, &status); + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("sddr09_get_wp: read_status fails\n"); + return result; + } + US_DEBUGP("sddr09_get_wp: status 0x%02X", status); + if ((status & 0x80) == 0) { + info->flags |= SDDR09_WP; /* write protected */ + US_DEBUGP(" WP"); + } + if (status & 0x40) + US_DEBUGP(" Ready"); + if (status & LUNBITS) + US_DEBUGP(" Suspended"); + if (status & 0x1) + US_DEBUGP(" Error"); + US_DEBUGP("\n"); + return USB_STOR_TRANSPORT_GOOD; +} + +#if 0 +/* + * Reset Command: 12 bytes. + * byte 0: opcode: EB + */ +static int +sddr09_reset(struct us_data *us) { + + unsigned char *command = us->iobuf; + + memset(command, 0, 12); + command[0] = 0xEB; + command[1] = LUNBITS; + + return sddr09_send_scsi_command(us, command, 12); +} +#endif + +static struct nand_flash_dev * +sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { + struct nand_flash_dev *cardinfo; + unsigned char deviceID[4]; + char blurbtxt[256]; + int result; + + US_DEBUGP("Reading capacity...\n"); + + result = sddr09_read_deviceID(us, deviceID); + + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("Result of read_deviceID is %d\n", result); + printk("sddr09: could not read card info\n"); + return NULL; + } + + sprintf(blurbtxt, "sddr09: Found Flash card, ID = %02X %02X %02X %02X", + deviceID[0], deviceID[1], deviceID[2], deviceID[3]); + + /* Byte 0 is the manufacturer */ + sprintf(blurbtxt + strlen(blurbtxt), + ": Manuf. %s", + nand_flash_manufacturer(deviceID[0])); + + /* Byte 1 is the device type */ + cardinfo = nand_find_id(deviceID[1]); + if (cardinfo) { + /* MB or MiB? It is neither. A 16 MB card has + 17301504 raw bytes, of which 16384000 are + usable for user data. */ + sprintf(blurbtxt + strlen(blurbtxt), + ", %d MB", 1<<(cardinfo->chipshift - 20)); + } else { + sprintf(blurbtxt + strlen(blurbtxt), + ", type unrecognized"); + } + + /* Byte 2 is code to signal availability of 128-bit ID */ + if (deviceID[2] == 0xa5) { + sprintf(blurbtxt + strlen(blurbtxt), + ", 128-bit ID"); + } + + /* Byte 3 announces the availability of another read ID command */ + if (deviceID[3] == 0xc0) { + sprintf(blurbtxt + strlen(blurbtxt), + ", extra cmd"); + } + + if (flags & SDDR09_WP) + sprintf(blurbtxt + strlen(blurbtxt), + ", WP"); + + printk("%s\n", blurbtxt); + + return cardinfo; +} + +static int +sddr09_read_map(struct us_data *us) { + + struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; + int numblocks, alloc_len, alloc_blocks; + int i, j, result; + unsigned char *buffer, *buffer_end, *ptr; + unsigned int lba, lbact; + + if (!info->capacity) + return -1; + + // size of a block is 1 << (blockshift + pageshift) bytes + // divide into the total capacity to get the number of blocks + + numblocks = info->capacity >> (info->blockshift + info->pageshift); + + // read 64 bytes for every block (actually 1 << CONTROL_SHIFT) + // but only use a 64 KB buffer + // buffer size used must be a multiple of (1 << CONTROL_SHIFT) +#define SDDR09_READ_MAP_BUFSZ 65536 + + alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT); + alloc_len = (alloc_blocks << CONTROL_SHIFT); + buffer = kmalloc(alloc_len, GFP_NOIO); + if (buffer == NULL) { + printk("sddr09_read_map: out of memory\n"); + result = -1; + goto done; + } + buffer_end = buffer + alloc_len; + +#undef SDDR09_READ_MAP_BUFSZ + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + + if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { + printk("sddr09_read_map: out of memory\n"); + result = -1; + goto done; + } + + for (i = 0; i < numblocks; i++) + info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF; + + /* + * Define lba-pba translation table + */ + + ptr = buffer_end; + for (i = 0; i < numblocks; i++) { + ptr += (1 << CONTROL_SHIFT); + if (ptr >= buffer_end) { + unsigned long address; + + address = i << (info->pageshift + info->blockshift); + result = sddr09_read_control( + us, address>>1, + min(alloc_blocks, numblocks - i), + buffer, 0); + if (result != USB_STOR_TRANSPORT_GOOD) { + result = -1; + goto done; + } + ptr = buffer; + } + + if (i == 0 || i == 1) { + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + /* special PBAs have control field 0^16 */ + for (j = 0; j < 16; j++) + if (ptr[j] != 0) + goto nonz; + info->pba_to_lba[i] = UNUSABLE; + printk("sddr09: PBA %d has no logical mapping\n", i); + continue; + + nonz: + /* unwritten PBAs have control field FF^16 */ + for (j = 0; j < 16; j++) + if (ptr[j] != 0xff) + goto nonff; + continue; + + nonff: + /* normal PBAs start with six FFs */ + if (j < 6) { + printk("sddr09: PBA %d has no logical mapping: " + "reserved area = %02X%02X%02X%02X " + "data status %02X block status %02X\n", + i, ptr[0], ptr[1], ptr[2], ptr[3], + ptr[4], ptr[5]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + if ((ptr[6] >> 4) != 0x01) { + printk("sddr09: PBA %d has invalid address field " + "%02X%02X/%02X%02X\n", + i, ptr[6], ptr[7], ptr[11], ptr[12]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + /* check even parity */ + if (parity[ptr[6] ^ ptr[7]]) { + printk("sddr09: Bad parity in LBA for block %d" + " (%02X %02X)\n", i, ptr[6], ptr[7]); + info->pba_to_lba[i] = UNUSABLE; + continue; + } + + lba = short_pack(ptr[7], ptr[6]); + lba = (lba & 0x07FF) >> 1; + + /* + * Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher block of LBA's. + * Also, there is a maximum of 1000 LBA's per zone. + * In other words, in PBA 1024-2047 you will find LBA 0-999 + * which are really LBA 1000-1999. This allows for 24 bad + * or special physical blocks per zone. + */ + + if (lba >= 1000) { + printk("sddr09: Bad low LBA %d for block %d\n", + lba, i); + goto possibly_erase; + } + + lba += 1000*(i/0x400); + + if (info->lba_to_pba[lba] != UNDEF) { + printk("sddr09: LBA %d seen for PBA %d and %d\n", + lba, info->lba_to_pba[lba], i); + goto possibly_erase; + } + + info->pba_to_lba[i] = lba; + info->lba_to_pba[lba] = i; + continue; + + possibly_erase: + if (erase_bad_lba_entries) { + unsigned long address; + + address = (i << (info->pageshift + info->blockshift)); + sddr09_erase(us, address>>1); + info->pba_to_lba[i] = UNDEF; + } else + info->pba_to_lba[i] = UNUSABLE; + } + + /* + * Approximate capacity. This is not entirely correct yet, + * since a zone with less than 1000 usable pages leads to + * missing LBAs. Especially if it is the last zone, some + * LBAs can be past capacity. + */ + lbact = 0; + for (i = 0; i < numblocks; i += 1024) { + int ct = 0; + + for (j = 0; j < 1024 && i+j < numblocks; j++) { + if (info->pba_to_lba[i+j] != UNUSABLE) { + if (ct >= 1000) + info->pba_to_lba[i+j] = SPARE; + else + ct++; + } + } + lbact += ct; + } + info->lbact = lbact; + US_DEBUGP("Found %d LBA's\n", lbact); + result = 0; + + done: + if (result != 0) { + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + } + kfree(buffer); + return result; +} + +static void +sddr09_card_info_destructor(void *extra) { + struct sddr09_card_info *info = (struct sddr09_card_info *)extra; + + if (!info) + return; + + kfree(info->lba_to_pba); + kfree(info->pba_to_lba); +} + +static void +sddr09_init_card_info(struct us_data *us) { + if (!us->extra) { + us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO); + if (us->extra) { + memset(us->extra, 0, sizeof(struct sddr09_card_info)); + us->extra_destructor = sddr09_card_info_destructor; + } + } +} + +/* + * This is needed at a very early stage. If this is not listed in the + * unusual devices list but called from here then LUN 0 of the combo reader + * is not recognized. But I do not know what precisely these calls do. + */ +int +sddr09_init(struct us_data *us) { + int result; + unsigned char *data = us->iobuf; + + result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("sddr09_init: send_command fails\n"); + return result; + } + + US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + // get 07 02 + + result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("sddr09_init: 2nd send_command fails\n"); + return result; + } + + US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + // get 07 00 + + result = sddr09_request_sense(us, data, 18); + if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) { + int j; + for (j=0; j<18; j++) + printk(" %02X", data[j]); + printk("\n"); + // get 70 00 00 00 00 00 00 * 00 00 00 00 00 00 + // 70: current command + // sense key 0, sense code 0, extd sense code 0 + // additional transfer length * = sizeof(data) - 7 + // Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00 + // sense key 06, sense code 28: unit attention, + // not ready to ready transition + } + + // test unit ready + + return USB_STOR_TRANSPORT_GOOD; /* not result */ +} + +/* + * Transport for the Sandisk SDDR-09 + */ +int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + static unsigned char sensekey = 0, sensecode = 0; + static unsigned char havefakesense = 0; + int result, i; + unsigned char *ptr = us->iobuf; + unsigned long capacity; + unsigned int page, pages; + + struct sddr09_card_info *info; + + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 + }; + + /* note: no block descriptor support */ + static unsigned char mode_page_01[19] = { + 0x00, 0x0F, 0x00, 0x0, 0x0, 0x0, 0x00, + 0x01, 0x0A, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + info = (struct sddr09_card_info *)us->extra; + if (!info) { + nand_init_ecc(); + sddr09_init_card_info(us); + info = (struct sddr09_card_info *)us->extra; + if (!info) + return USB_STOR_TRANSPORT_ERROR; + } + + if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) { + /* for a faked command, we have to follow with a faked sense */ + memset(ptr, 0, 18); + ptr[0] = 0x70; + ptr[2] = sensekey; + ptr[7] = 11; + ptr[12] = sensecode; + usb_stor_set_xfer_buf(ptr, 18, srb); + sensekey = sensecode = havefakesense = 0; + return USB_STOR_TRANSPORT_GOOD; + } + + havefakesense = 1; + + /* Dummy up a response for INQUIRY since SDDR09 doesn't + respond to INQUIRY commands */ + + if (srb->cmnd[0] == INQUIRY) { + memcpy(ptr, inquiry_response, 8); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + struct nand_flash_dev *cardinfo; + + sddr09_get_wp(us, info); /* read WP bit */ + + cardinfo = sddr09_get_cardinfo(us, info->flags); + if (!cardinfo) { + /* probably no media */ + init_error: + sensekey = 0x02; /* not ready */ + sensecode = 0x3a; /* medium not present */ + return USB_STOR_TRANSPORT_FAILED; + } + + info->capacity = (1 << cardinfo->chipshift); + info->pageshift = cardinfo->pageshift; + info->pagesize = (1 << info->pageshift); + info->blockshift = cardinfo->blockshift; + info->blocksize = (1 << info->blockshift); + info->blockmask = info->blocksize - 1; + + // map initialization, must follow get_cardinfo() + if (sddr09_read_map(us)) { + /* probably out of memory */ + goto init_error; + } + + // Report capacity + + capacity = (info->lbact << info->blockshift) - 1; + + ((__be32 *) ptr)[0] = cpu_to_be32(capacity); + + // Report page size + + ((__be32 *) ptr)[1] = cpu_to_be32(info->pagesize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + int modepage = (srb->cmnd[2] & 0x3F); + + /* They ask for the Read/Write error recovery page, + or for all pages. */ + /* %% We should check DBD %% */ + if (modepage == 0x01 || modepage == 0x3F) { + US_DEBUGP("SDDR09: Dummy up request for " + "mode page 0x%x\n", modepage); + + memcpy(ptr, mode_page_01, sizeof(mode_page_01)); + ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2); + ptr[3] = (info->flags & SDDR09_WP) ? 0x80 : 0; + usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); + return USB_STOR_TRANSPORT_GOOD; + } + + sensekey = 0x05; /* illegal request */ + sensecode = 0x24; /* invalid field in CDB */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) + return USB_STOR_TRANSPORT_GOOD; + + havefakesense = 0; + + if (srb->cmnd[0] == READ_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("READ_10: read page %d pagect %d\n", + page, pages); + + return sddr09_read_data(us, page, pages); + } + + if (srb->cmnd[0] == WRITE_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("WRITE_10: write page %d pagect %d\n", + page, pages); + + return sddr09_write_data(us, page, pages); + } + + /* catch-all for all other commands, except + * pass TEST_UNIT_READY and REQUEST_SENSE through + */ + if (srb->cmnd[0] != TEST_UNIT_READY && + srb->cmnd[0] != REQUEST_SENSE) { + sensekey = 0x05; /* illegal request */ + sensecode = 0x20; /* invalid command */ + havefakesense = 1; + return USB_STOR_TRANSPORT_FAILED; + } + + for (; srb->cmd_len<12; srb->cmd_len++) + srb->cmnd[srb->cmd_len] = 0; + + srb->cmnd[1] = LUNBITS; + + ptr[0] = 0; + for (i=0; i<12; i++) + sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]); + + US_DEBUGP("SDDR09: Send control for command %s\n", ptr); + + result = sddr09_send_scsi_command(us, srb->cmnd, 12); + if (result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " + "returns %d\n", result); + return result; + } + + if (srb->request_bufflen == 0) + return USB_STOR_TRANSPORT_GOOD; + + if (srb->sc_data_direction == DMA_TO_DEVICE || + srb->sc_data_direction == DMA_FROM_DEVICE) { + unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE) + ? us->send_bulk_pipe : us->recv_bulk_pipe; + + US_DEBUGP("SDDR09: %s %d bytes\n", + (srb->sc_data_direction == DMA_TO_DEVICE) ? + "sending" : "receiving", + srb->request_bufflen); + + result = usb_stor_bulk_transfer_sg(us, pipe, + srb->request_buffer, + srb->request_bufflen, + srb->use_sg, &srb->resid); + + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + } + + return USB_STOR_TRANSPORT_GOOD; +} + diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h new file mode 100644 index 000000000000..c9d78d6188b1 --- /dev/null +++ b/drivers/usb/storage/sddr09.h @@ -0,0 +1,48 @@ +/* Driver for SanDisk SDDR-09 SmartMedia reader + * Header File + * + * $Id: sddr09.h,v 1.5 2000/08/25 00:13:51 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 2000 Robert Baruch (autophile@dol.net) + * (c) 2002 Andries Brouwer (aeb@cwi.nl) + * + * See sddr09.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_SHUTTLE_EUSB_SDDR09_H +#define _USB_SHUTTLE_EUSB_SDDR09_H + +/* Sandisk SDDR-09 stuff */ + +extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); + +struct sddr09_card_info { + unsigned long capacity; /* Size of card in bytes */ + int pagesize; /* Size of page in bytes */ + int pageshift; /* log2 of pagesize */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int lbact; /* number of available pages */ + int flags; +#define SDDR09_WP 1 /* write protected */ +}; + +#endif diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c new file mode 100644 index 000000000000..229ca181716b --- /dev/null +++ b/drivers/usb/storage/sddr55.c @@ -0,0 +1,938 @@ +/* Driver for SanDisk SDDR-55 SmartMedia reader + * + * $Id:$ + * + * SDDR55 driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2002 Simon Munton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "sddr55.h" + + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) +#define PAGESIZE 512 + +#define set_sense_info(sk, asc, ascq) \ + do { \ + info->sense_data[2] = sk; \ + info->sense_data[12] = asc; \ + info->sense_data[13] = ascq; \ + } while (0) + + +struct sddr55_card_info { + unsigned long capacity; /* Size of card in bytes */ + int max_log_blks; /* maximum number of logical blocks */ + int pageshift; /* log2 of pagesize */ + int smallpageshift; /* 1 if pagesize == 256 */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int read_only; /* non zero if card is write protected */ + int force_read_only; /* non zero if we find a map error*/ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int fatal_error; /* set if we detect something nasty */ + unsigned long last_access; /* number of jiffies since we last talked to device */ + unsigned char sense_data[18]; +}; + + +#define NOT_ALLOCATED 0xffffffff +#define BAD_BLOCK 0xffff +#define CIS_BLOCK 0x400 +#define UNUSED_BLOCK 0x3ff + +static int +sddr55_bulk_transport(struct us_data *us, int direction, + unsigned char *data, unsigned int len) { + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned int pipe = (direction == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + + if (!len) + return USB_STOR_XFER_GOOD; + info->last_access = jiffies; + return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL); +} + +/* check if card inserted, if there is, update read_only status + * return non zero if no card + */ + +static int sddr55_status(struct us_data *us) +{ + int result; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + + /* send command */ + memset(command, 0, 8); + command[5] = 0xB0; + command[7] = 0x80; + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + US_DEBUGP("Result for send_command in status %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + return USB_STOR_TRANSPORT_ERROR; + } + + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 4); + + /* expect to get short transfer if no card fitted */ + if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) { + /* had a short transfer, no card inserted, free map memory */ + if (info->lba_to_pba) + kfree(info->lba_to_pba); + if (info->pba_to_lba) + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + + info->fatal_error = 0; + info->force_read_only = 0; + + set_sense_info (2, 0x3a, 0); /* not ready, medium not present */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + return USB_STOR_TRANSPORT_FAILED; + } + + /* check write protect status */ + info->read_only = (status[0] & 0x20); + + /* now read status */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 2); + + if (result != USB_STOR_XFER_GOOD) { + set_sense_info (4, 0, 0); /* hardware error */ + } + + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED); +} + + +static int sddr55_read_data(struct us_data *us, + unsigned int lba, + unsigned int page, + unsigned short sectors) { + + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned char *buffer; + + unsigned int pba; + unsigned long address; + + unsigned short pages; + unsigned int len, index, offset; + + // Since we only read in one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min((unsigned int) sectors, (unsigned int) info->blocksize >> + info->smallpageshift) * PAGESIZE; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; /* out of memory */ + index = offset = 0; + + while (sectors>0) { + + /* have we got to end? */ + if (lba >= info->max_log_blks) + break; + + pba = info->lba_to_pba[lba]; + + // Read as many sectors as possible in this block + + pages = min((unsigned int) sectors << info->smallpageshift, + info->blocksize - page); + len = pages << info->pageshift; + + US_DEBUGP("Read %02X pages, from PBA %04X" + " (LBA %04X) page %02X\n", + pages, pba, lba, page); + + if (pba == NOT_ALLOCATED) { + /* no pba for this lba, fill with zeroes */ + memset (buffer, 0, len); + } else { + + address = (pba << info->blockshift) + page; + + command[0] = 0; + command[1] = LSB_of(address>>16); + command[2] = LSB_of(address>>8); + command[3] = LSB_of(address); + + command[4] = 0; + command[5] = 0xB0; + command[6] = LSB_of(pages << (1 - info->smallpageshift)); + command[7] = 0x85; + + /* send command */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + US_DEBUGP("Result for send_command in read_data %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* read data */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, buffer, len); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* now read status */ + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, status, 2); + + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + /* check status for error */ + if (status[0] == 0xff && status[1] == 0x4) { + set_sense_info (3, 0x11, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + } + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages >> info->smallpageshift; + } + + result = USB_STOR_TRANSPORT_GOOD; + +leave: + kfree(buffer); + + return result; +} + +static int sddr55_write_data(struct us_data *us, + unsigned int lba, + unsigned int page, + unsigned short sectors) { + + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *command = us->iobuf; + unsigned char *status = us->iobuf; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + unsigned char *buffer; + + unsigned int pba; + unsigned int new_pba; + unsigned long address; + + unsigned short pages; + int i; + unsigned int len, index, offset; + + /* check if we are allowed to write */ + if (info->read_only || info->force_read_only) { + set_sense_info (7, 0x27, 0); /* read only */ + return USB_STOR_TRANSPORT_FAILED; + } + + // Since we only write one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = min((unsigned int) sectors, (unsigned int) info->blocksize >> + info->smallpageshift) * PAGESIZE; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + index = offset = 0; + + while (sectors > 0) { + + /* have we got to end? */ + if (lba >= info->max_log_blks) + break; + + pba = info->lba_to_pba[lba]; + + // Write as many sectors as possible in this block + + pages = min((unsigned int) sectors << info->smallpageshift, + info->blocksize - page); + len = pages << info->pageshift; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, FROM_XFER_BUF); + + US_DEBUGP("Write %02X pages, to PBA %04X" + " (LBA %04X) page %02X\n", + pages, pba, lba, page); + + command[4] = 0; + + if (pba == NOT_ALLOCATED) { + /* no pba allocated for this lba, find a free pba to use */ + + int max_pba = (info->max_log_blks / 250 ) * 256; + int found_count = 0; + int found_pba = -1; + + /* set pba to first block in zone lba is in */ + pba = (lba / 1000) * 1024; + + US_DEBUGP("No PBA for LBA %04X\n",lba); + + if (max_pba > 1024) + max_pba = 1024; + + /* + * Scan through the map looking for an unused block + * leave 16 unused blocks at start (or as many as + * possible) since the sddr55 seems to reuse a used + * block when it shouldn't if we don't leave space. + */ + for (i = 0; i < max_pba; i++, pba++) { + if (info->pba_to_lba[pba] == UNUSED_BLOCK) { + found_pba = pba; + if (found_count++ > 16) + break; + } + } + + pba = found_pba; + + if (pba == -1) { + /* oh dear */ + US_DEBUGP("Couldn't find unallocated block\n"); + + set_sense_info (3, 0x31, 0); /* medium error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba); + + /* set writing to unallocated block flag */ + command[4] = 0x40; + } + + address = (pba << info->blockshift) + page; + + command[1] = LSB_of(address>>16); + command[2] = LSB_of(address>>8); + command[3] = LSB_of(address); + + /* set the lba into the command, modulo 1000 */ + command[0] = LSB_of(lba % 1000); + command[6] = MSB_of(lba % 1000); + + command[4] |= LSB_of(pages >> info->smallpageshift); + command[5] = 0xB0; + command[7] = 0x86; + + /* send command */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, command, 8); + + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for send_command in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* send the data */ + result = sddr55_bulk_transport(us, + DMA_TO_DEVICE, buffer, len); + + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for send_data in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* now read status */ + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); + + if (result != USB_STOR_XFER_GOOD) { + US_DEBUGP("Result for get_status in write_data %d\n", + result); + + /* set_sense_info is superfluous here? */ + set_sense_info (3, 0x3, 0);/* peripheral write error */ + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + new_pba = (status[3] + (status[4] << 8) + (status[5] << 16)) + >> info->blockshift; + + /* check status for error */ + if (status[0] == 0xff && status[1] == 0x4) { + info->pba_to_lba[new_pba] = BAD_BLOCK; + + set_sense_info (3, 0x0c, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", + lba, pba, new_pba); + + /* update the lba<->pba maps, note new_pba might be the same as pba */ + info->lba_to_pba[lba] = new_pba; + info->pba_to_lba[pba] = UNUSED_BLOCK; + + /* check that new_pba wasn't already being used */ + if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) { + printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n", + new_pba, info->pba_to_lba[new_pba]); + info->fatal_error = 1; + set_sense_info (3, 0x31, 0); + result = USB_STOR_TRANSPORT_FAILED; + goto leave; + } + + /* update the pba<->lba maps for new_pba */ + info->pba_to_lba[new_pba] = lba % 1000; + + page = 0; + lba++; + sectors -= pages >> info->smallpageshift; + } + result = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return result; +} + +static int sddr55_read_deviceID(struct us_data *us, + unsigned char *manufacturerID, + unsigned char *deviceID) { + + int result; + unsigned char *command = us->iobuf; + unsigned char *content = us->iobuf; + + memset(command, 0, 8); + command[5] = 0xB0; + command[7] = 0x84; + result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); + + US_DEBUGP("Result of send_control for device ID is %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, content, 4); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + *manufacturerID = content[0]; + *deviceID = content[1]; + + if (content[0] != 0xff) { + result = sddr55_bulk_transport(us, + DMA_FROM_DEVICE, content, 2); + } + + return USB_STOR_TRANSPORT_GOOD; +} + + +int sddr55_reset(struct us_data *us) { + return 0; +} + + +static unsigned long sddr55_get_capacity(struct us_data *us) { + + unsigned char manufacturerID; + unsigned char deviceID; + int result; + struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; + + US_DEBUGP("Reading capacity...\n"); + + result = sddr55_read_deviceID(us, + &manufacturerID, + &deviceID); + + US_DEBUGP("Result of read_deviceID is %d\n", + result); + + if (result != USB_STOR_XFER_GOOD) + return 0; + + US_DEBUGP("Device ID = %02X\n", deviceID); + US_DEBUGP("Manuf ID = %02X\n", manufacturerID); + + info->pageshift = 9; + info->smallpageshift = 0; + info->blocksize = 16; + info->blockshift = 4; + info->blockmask = 15; + + switch (deviceID) { + + case 0x6e: // 1MB + case 0xe8: + case 0xec: + info->pageshift = 8; + info->smallpageshift = 1; + return 0x00100000; + + case 0xea: // 2MB + case 0x64: + info->pageshift = 8; + info->smallpageshift = 1; + case 0x5d: // 5d is a ROM card with pagesize 512. + return 0x00200000; + + case 0xe3: // 4MB + case 0xe5: + case 0x6b: + case 0xd5: + return 0x00400000; + + case 0xe6: // 8MB + case 0xd6: + return 0x00800000; + + case 0x73: // 16MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x01000000; + + case 0x75: // 32MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x02000000; + + case 0x76: // 64MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x04000000; + + case 0x79: // 128MB + info->blocksize = 32; + info->blockshift = 5; + info->blockmask = 31; + return 0x08000000; + + default: // unknown + return 0; + + } +} + +static int sddr55_read_map(struct us_data *us) { + + struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra); + int numblocks; + unsigned char *buffer; + unsigned char *command = us->iobuf; + int i; + unsigned short lba; + unsigned short max_lba; + int result; + + if (!info->capacity) + return -1; + + numblocks = info->capacity >> (info->blockshift + info->pageshift); + + buffer = kmalloc( numblocks * 2, GFP_NOIO ); + + if (!buffer) + return -1; + + memset(command, 0, 8); + command[5] = 0xB0; + command[6] = numblocks * 2 / 256; + command[7] = 0x8A; + + result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2); + + if ( result != USB_STOR_XFER_GOOD) { + kfree (buffer); + return -1; + } + + if (info->lba_to_pba) + kfree(info->lba_to_pba); + if (info->pba_to_lba) + kfree(info->pba_to_lba); + info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); + + if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { + if (info->lba_to_pba != NULL) + kfree(info->lba_to_pba); + if (info->pba_to_lba != NULL) + kfree(info->pba_to_lba); + info->lba_to_pba = NULL; + info->pba_to_lba = NULL; + kfree(buffer); + return -1; + } + + memset(info->lba_to_pba, 0xff, numblocks*sizeof(int)); + memset(info->pba_to_lba, 0xff, numblocks*sizeof(int)); + + /* set maximum lba */ + max_lba = info->max_log_blks; + if (max_lba > 1000) + max_lba = 1000; + + // Each block is 64 bytes of control data, so block i is located in + // scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11) + + for (i=0; i<numblocks; i++) { + int zone = i / 1024; + + lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]); + + /* Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher + * block of LBA's. Also, there is a maximum of + * 1000 LBA's per zone. In other words, in PBA + * 1024-2047 you will find LBA 0-999 which are + * really LBA 1000-1999. Yes, this wastes 24 + * physical blocks per zone. Go figure. + * These devices can have blocks go bad, so there + * are 24 spare blocks to use when blocks do go bad. + */ + + /* SDDR55 returns 0xffff for a bad block, and 0x400 for the + * CIS block. (Is this true for cards 8MB or less??) + * Record these in the physical to logical map + */ + + info->pba_to_lba[i] = lba; + + if (lba >= max_lba) { + continue; + } + + if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && + !info->force_read_only) { + printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000); + info->force_read_only = 1; + } + + if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) + US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i); + + info->lba_to_pba[lba + zone * 1000] = i; + } + + kfree(buffer); + return 0; +} + + +static void sddr55_card_info_destructor(void *extra) { + struct sddr55_card_info *info = (struct sddr55_card_info *)extra; + + if (!extra) + return; + + if (info->lba_to_pba) + kfree(info->lba_to_pba); + if (info->pba_to_lba) + kfree(info->pba_to_lba); +} + + +/* + * Transport for the Sandisk SDDR-55 + */ +int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int result; + static unsigned char inquiry_response[8] = { + 0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 + }; + // write-protected for now, no block descriptor support + static unsigned char mode_page_01[20] = { + 0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0, + 0x01, 0x0A, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + unsigned char *ptr = us->iobuf; + unsigned long capacity; + unsigned int lba; + unsigned int pba; + unsigned int page; + unsigned short pages; + struct sddr55_card_info *info; + + if (!us->extra) { + us->extra = kmalloc( + sizeof(struct sddr55_card_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + memset(us->extra, 0, sizeof(struct sddr55_card_info)); + us->extra_destructor = sddr55_card_info_destructor; + } + + info = (struct sddr55_card_info *)(us->extra); + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]); + + memcpy (ptr, info->sense_data, sizeof info->sense_data); + ptr[0] = 0x70; + ptr[7] = 11; + usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb); + memset (info->sense_data, 0, sizeof info->sense_data); + + return USB_STOR_TRANSPORT_GOOD; + } + + memset (info->sense_data, 0, sizeof info->sense_data); + + /* Dummy up a response for INQUIRY since SDDR55 doesn't + respond to INQUIRY commands */ + + if (srb->cmnd[0] == INQUIRY) { + memcpy(ptr, inquiry_response, 8); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + /* only check card status if the map isn't allocated, ie no card seen yet + * or if it's been over half a second since we last accessed it + */ + if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) { + + /* check to see if a card is fitted */ + result = sddr55_status (us); + if (result) { + result = sddr55_status (us); + if (!result) { + set_sense_info (6, 0x28, 0); /* new media, set unit attention, not ready to ready */ + } + return USB_STOR_TRANSPORT_FAILED; + } + } + + /* if we detected a problem with the map when writing, + don't allow any more access */ + if (info->fatal_error) { + + set_sense_info (3, 0x31, 0); + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + + capacity = sddr55_get_capacity(us); + + if (!capacity) { + set_sense_info (3, 0x30, 0); /* incompatible medium */ + return USB_STOR_TRANSPORT_FAILED; + } + + info->capacity = capacity; + + /* figure out the maximum logical block number, allowing for + * the fact that only 250 out of every 256 are used */ + info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250; + + /* Last page in the card, adjust as we only use 250 out of + * every 256 pages */ + capacity = (capacity / 256) * 250; + + capacity /= PAGESIZE; + capacity--; + + ((__be32 *) ptr)[0] = cpu_to_be32(capacity); + ((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE); + usb_stor_set_xfer_buf(ptr, 8, srb); + + sddr55_read_map(us); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + + memcpy(ptr, mode_page_01, sizeof mode_page_01); + ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0; + usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); + + if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { + US_DEBUGP( + "SDDR55: Dummy up request for mode page 1\n"); + return USB_STOR_TRANSPORT_GOOD; + + } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { + US_DEBUGP( + "SDDR55: Dummy up request for all mode pages\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + set_sense_info (5, 0x24, 0); /* invalid field in command */ + return USB_STOR_TRANSPORT_FAILED; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + + US_DEBUGP( + "SDDR55: %s medium removal. Not that I can do" + " anything about it...\n", + (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); + + return USB_STOR_TRANSPORT_GOOD; + + } + + if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) { + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + page <<= info->smallpageshift; + + // convert page to block and page-within-block + + lba = page >> info->blockshift; + page = page & info->blockmask; + + // locate physical block corresponding to logical block + + if (lba >= info->max_log_blks) { + + US_DEBUGP("Error: Requested LBA %04X exceeds maximum " + "block %04X\n", lba, info->max_log_blks-1); + + set_sense_info (5, 0x24, 0); /* invalid field in command */ + + return USB_STOR_TRANSPORT_FAILED; + } + + pba = info->lba_to_pba[lba]; + + if (srb->cmnd[0] == WRITE_10) { + US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X" + " pages %d\n", + pba, lba, page, pages); + + return sddr55_write_data(us, lba, page, pages); + } else { + US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X" + " pages %d\n", + pba, lba, page, pages); + + return sddr55_read_data(us, lba, page, pages); + } + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + return USB_STOR_TRANSPORT_GOOD; + } + + set_sense_info (5, 0x20, 0); /* illegal command */ + + return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? +} + diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/sddr55.h new file mode 100644 index 000000000000..d6bd32f6c9f3 --- /dev/null +++ b/drivers/usb/storage/sddr55.h @@ -0,0 +1,34 @@ +/* Driver for SanDisk SDDR-55 SmartMedia reader + * Header File + * + * $Id:$ + * + * Current development and maintenance by: + * (c) 2002 Simon Munton + * + * See sddr55.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_SHUTTLE_EUSB_SDDR55_H +#define _USB_SHUTTLE_EUSB_SDDR55_H + +/* Sandisk SDDR-55 stuff */ + +extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us); +extern int sddr55_reset(struct us_data *us); + +#endif diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c new file mode 100644 index 000000000000..7eff03d9b041 --- /dev/null +++ b/drivers/usb/storage/shuttle_usbat.c @@ -0,0 +1,1712 @@ +/* Driver for SCM Microsystems USB-ATAPI cable + * + * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 2000, 2001 Robert Baruch (autophile@starband.net) + * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> + * + * Developed with the assistance of: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Flash support based on earlier work by: + * (c) 2002 Thomas Kreiling <usbdev@sm04.de> + * + * Many originally ATAPI devices were slightly modified to meet the USB + * market by using some kind of translation from ATAPI to USB on the host, + * and the peripheral would translate from USB back to ATAPI. + * + * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, + * which does the USB-to-ATAPI conversion. By obtaining the data sheet on + * their device under nondisclosure agreement, I have been able to write + * this driver for Linux. + * + * The chip used in the device can also be used for EPP and ISA translation + * as well. This driver is only guaranteed to work with the ATAPI + * translation. + * + * See the Kconfig help text for a list of devices known to be supported by + * this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/cdrom.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "shuttle_usbat.h" + +#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +static int transferred = 0; + +static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); +static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); + +/* + * Convenience function to produce an ATAPI read/write sectors command + * Use cmd=0x20 for read, cmd=0x30 for write + */ +static void usbat_pack_atapi_sector_cmd(unsigned char *buf, + unsigned char thistime, + u32 sector, unsigned char cmd) +{ + buf[0] = 0; + buf[1] = thistime; + buf[2] = sector & 0xFF; + buf[3] = (sector >> 8) & 0xFF; + buf[4] = (sector >> 16) & 0xFF; + buf[5] = 0xE0 | ((sector >> 24) & 0x0F); + buf[6] = cmd; +} + +/* + * Convenience function to get the device type (flash or hp8200) + */ +static int usbat_get_device_type(struct us_data *us) +{ + return ((struct usbat_info*)us->extra)->devicetype; +} + +/* + * Read a register from the device + */ +static int usbat_read(struct us_data *us, + unsigned char access, + unsigned char reg, + unsigned char *content) +{ + return usb_stor_ctrl_transfer(us, + us->recv_ctrl_pipe, + access | USBAT_CMD_READ_REG, + 0xC0, + (u16)reg, + 0, + content, + 1); +} + +/* + * Write to a register on the device + */ +static int usbat_write(struct us_data *us, + unsigned char access, + unsigned char reg, + unsigned char content) +{ + return usb_stor_ctrl_transfer(us, + us->send_ctrl_pipe, + access | USBAT_CMD_WRITE_REG, + 0x40, + short_pack(reg, content), + 0, + NULL, + 0); +} + +/* + * Convenience function to perform a bulk read + */ +static int usbat_bulk_read(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("usbat_bulk_read: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL); +} + +/* + * Convenience function to perform a bulk write + */ +static int usbat_bulk_write(struct us_data *us, + unsigned char *data, + unsigned int len) +{ + if (len == 0) + return USB_STOR_XFER_GOOD; + + US_DEBUGP("usbat_bulk_write: len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL); +} + +/* + * Some USBAT-specific commands can only be executed over a command transport + * This transport allows one (len=8) or two (len=16) vendor-specific commands + * to be executed. + */ +static int usbat_execute_command(struct us_data *us, + unsigned char *commands, + unsigned int len) +{ + return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + USBAT_CMD_EXEC_CMD, 0x40, 0, 0, + commands, len); +} + +/* + * Read the status register + */ +static int usbat_get_status(struct us_data *us, unsigned char *status) +{ + int rc; + rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); + + US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); + return rc; +} + +/* + * Check the device status + */ +static int usbat_check_status(struct us_data *us) +{ + unsigned char *reply = us->iobuf; + int rc; + + if (!us) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_get_status(us, reply); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) + return USB_STOR_TRANSPORT_FAILED; + + if (*reply & 0x20) // device fault + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Stores critical information in internal registers in prepartion for the execution + * of a conditional usbat_read_blocks or usbat_write_blocks call. + */ +static int usbat_set_shuttle_features(struct us_data *us, + unsigned char external_trigger, + unsigned char epp_control, + unsigned char mask_byte, + unsigned char test_pattern, + unsigned char subcountH, + unsigned char subcountL) +{ + unsigned char *command = us->iobuf; + + command[0] = 0x40; + command[1] = USBAT_CMD_SET_FEAT; + + // The only bit relevant to ATA access is bit 6 + // which defines 8 bit data access (set) or 16 bit (unset) + command[2] = epp_control; + + // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, + // ET1 and ET2 define an external event to be checked for on event of a + // _read_blocks or _write_blocks operation. The read/write will not take + // place unless the defined trigger signal is active. + command[3] = external_trigger; + + // The resultant byte of the mask operation (see mask_byte) is compared for + // equivalence with this test pattern. If equal, the read/write will take + // place. + command[4] = test_pattern; + + // This value is logically ANDed with the status register field specified + // in the read/write command. + command[5] = mask_byte; + + // If ALQ is set in the qualifier, this field contains the address of the + // registers where the byte count should be read for transferring the data. + // If ALQ is not set, then this field contains the number of bytes to be + // transferred. + command[6] = subcountL; + command[7] = subcountH; + + return usbat_execute_command(us, command, 8); +} + +/* + * Block, waiting for an ATA device to become not busy or to report + * an error condition. + */ +static int usbat_wait_not_busy(struct us_data *us, int minutes) +{ + int i; + int result; + unsigned char *status = us->iobuf; + + /* Synchronizing cache on a CDR could take a heck of a long time, + * but probably not more than 10 minutes or so. On the other hand, + * doing a full blank on a CDRW at speed 1 will take about 75 + * minutes! + */ + + for (i=0; i<1200+minutes*60; i++) { + + result = usbat_get_status(us, status); + + if (result!=USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (*status & 0x01) { // check condition + result = usbat_read(us, USBAT_ATA, 0x10, status); + return USB_STOR_TRANSPORT_FAILED; + } + if (*status & 0x20) // device fault + return USB_STOR_TRANSPORT_FAILED; + + if ((*status & 0x80)==0x00) { // not busy + US_DEBUGP("Waited not busy for %d steps\n", i); + return USB_STOR_TRANSPORT_GOOD; + } + + if (i<500) + msleep(10); // 5 seconds + else if (i<700) + msleep(50); // 10 seconds + else if (i<1200) + msleep(100); // 50 seconds + else + msleep(1000); // X minutes + } + + US_DEBUGP("Waited not busy for %d minutes, timing out.\n", + minutes); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Read block data from the data register + */ +static int usbat_read_block(struct us_data *us, + unsigned char *content, + unsigned short len) +{ + int result; + unsigned char *command = us->iobuf; + + if (!len) + return USB_STOR_TRANSPORT_GOOD; + + command[0] = 0xC0; + command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = 0; + command[4] = 0; + command[5] = 0; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = usbat_bulk_read(us, content, len); + return (result == USB_STOR_XFER_GOOD ? + USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); +} + +/* + * Write block data via the data register + */ +static int usbat_write_block(struct us_data *us, + unsigned char access, + unsigned char *content, + unsigned short len, + int minutes) +{ + int result; + unsigned char *command = us->iobuf; + + if (!len) + return USB_STOR_TRANSPORT_GOOD; + + command[0] = 0x40; + command[1] = access | USBAT_CMD_WRITE_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = 0; + command[4] = 0; + command[5] = 0; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + result = usbat_execute_command(us, command, 8); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + result = usbat_bulk_write(us, content, len); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return usbat_wait_not_busy(us, minutes); +} + +/* + * Process read and write requests + */ +static int usbat_hp8200e_rw_block_test(struct us_data *us, + unsigned char access, + unsigned char *registers, + unsigned char *data_out, + unsigned short num_registers, + unsigned char data_reg, + unsigned char status_reg, + unsigned char timeout, + unsigned char qualifier, + int direction, + unsigned char *content, + unsigned short len, + int use_sg, + int minutes) +{ + int result; + unsigned int pipe = (direction == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + + unsigned char *command = us->iobuf; + int i, j; + int cmdlen; + unsigned char *data = us->iobuf; + unsigned char *status = us->iobuf; + + BUG_ON(num_registers > US_IOBUF_SIZE/2); + + for (i=0; i<20; i++) { + + /* + * The first time we send the full command, which consists + * of downloading the SCSI command followed by downloading + * the data via a write-and-test. Any other time we only + * send the command to download the data -- the SCSI command + * is still 'active' in some sense in the device. + * + * We're only going to try sending the data 10 times. After + * that, we just return a failure. + */ + + if (i==0) { + cmdlen = 16; + // Write to multiple registers + // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, + // but that's what came out of the trace every single time. + command[0] = 0x40; + command[1] = access | USBAT_CMD_WRITE_REGS; + command[2] = 0x07; + command[3] = 0x17; + command[4] = 0xFC; + command[5] = 0xE7; + command[6] = LSB_of(num_registers*2); + command[7] = MSB_of(num_registers*2); + } else + cmdlen = 8; + + // Conditionally read or write blocks + command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); + command[cmdlen-7] = access | + (direction==DMA_TO_DEVICE ? + USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK); + command[cmdlen-6] = data_reg; + command[cmdlen-5] = status_reg; + command[cmdlen-4] = timeout; + command[cmdlen-3] = qualifier; + command[cmdlen-2] = LSB_of(len); + command[cmdlen-1] = MSB_of(len); + + result = usbat_execute_command(us, command, cmdlen); + + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (i==0) { + + for (j=0; j<num_registers; j++) { + data[j<<1] = registers[j]; + data[1+(j<<1)] = data_out[j]; + } + + result = usbat_bulk_write(us, data, num_registers*2); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + } + + + //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n", + // direction == DMA_TO_DEVICE ? "out" : "in", + // len, use_sg); + + result = usb_stor_bulk_transfer_sg(us, + pipe, content, len, use_sg, NULL); + + /* + * If we get a stall on the bulk download, we'll retry + * the bulk download -- but not the SCSI command because + * in some sense the SCSI command is still 'active' and + * waiting for the data. Don't ask me why this should be; + * I'm only following what the Windoze driver did. + * + * Note that a stall for the test-and-read/write command means + * that the test failed. In this case we're testing to make + * sure that the device is error-free + * (i.e. bit 0 -- CHK -- of status is 0). The most likely + * hypothesis is that the USBAT chip somehow knows what + * the device will accept, but doesn't give the device any + * data until all data is received. Thus, the device would + * still be waiting for the first byte of data if a stall + * occurs, even if the stall implies that some data was + * transferred. + */ + + if (result == USB_STOR_XFER_SHORT || + result == USB_STOR_XFER_STALLED) { + + /* + * If we're reading and we stalled, then clear + * the bulk output pipe only the first time. + */ + + if (direction==DMA_FROM_DEVICE && i==0) { + if (usb_stor_clear_halt(us, + us->send_bulk_pipe) < 0) + return USB_STOR_TRANSPORT_ERROR; + } + + /* + * Read status: is the device angry, or just busy? + */ + + result = usbat_read(us, USBAT_ATA, + direction==DMA_TO_DEVICE ? + USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS, + status); + + if (result!=USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (*status & 0x01) // check condition + return USB_STOR_TRANSPORT_FAILED; + if (*status & 0x20) // device fault + return USB_STOR_TRANSPORT_FAILED; + + US_DEBUGP("Redoing %s\n", + direction==DMA_TO_DEVICE ? "write" : "read"); + + } else if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + else + return usbat_wait_not_busy(us, minutes); + + } + + US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", + direction==DMA_TO_DEVICE ? "Writing" : "Reading"); + + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Write to multiple registers: + * Allows us to write specific data to any registers. The data to be written + * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN + * which gets sent through bulk out. + * Not designed for large transfers of data! + */ +static int usbat_multiple_write(struct us_data *us, + unsigned char *registers, + unsigned char *data_out, + unsigned short num_registers) +{ + int i, result; + unsigned char *data = us->iobuf; + unsigned char *command = us->iobuf; + + BUG_ON(num_registers > US_IOBUF_SIZE/2); + + // Write to multiple registers, ATA access + command[0] = 0x40; + command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; + + // No relevance + command[2] = 0; + command[3] = 0; + command[4] = 0; + command[5] = 0; + + // Number of bytes to be transferred (incl. addresses and data) + command[6] = LSB_of(num_registers*2); + command[7] = MSB_of(num_registers*2); + + // The setup command + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + // Create the reg/data, reg/data sequence + for (i=0; i<num_registers; i++) { + data[i<<1] = registers[i]; + data[1+(i<<1)] = data_out[i]; + } + + // Send the data + result = usbat_bulk_write(us, data, num_registers*2); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_get_device_type(us) == USBAT_DEV_HP8200) + return usbat_wait_not_busy(us, 0); + else + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Conditionally read blocks from device: + * Allows us to read blocks from a specific data register, based upon the + * condition that a status register can be successfully masked with a status + * qualifier. If this condition is not initially met, the read will wait + * up until a maximum amount of time has elapsed, as specified by timeout. + * The read will start when the condition is met, otherwise the command aborts. + * + * The qualifier defined here is not the value that is masked, it defines + * conditions for the write to take place. The actual masked qualifier (and + * other related details) are defined beforehand with _set_shuttle_features(). + */ +static int usbat_read_blocks(struct us_data *us, + unsigned char *buffer, + int len) +{ + int result; + unsigned char *command = us->iobuf; + + command[0] = 0xC0; + command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = USBAT_ATA_STATUS; + command[4] = 0xFD; // Timeout (ms); + command[5] = USBAT_QUAL_FCQ; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + // Multiple block read setup command + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + // Read the blocks we just asked for + result = usbat_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Conditionally write blocks to device: + * Allows us to write blocks to a specific data register, based upon the + * condition that a status register can be successfully masked with a status + * qualifier. If this condition is not initially met, the write will wait + * up until a maximum amount of time has elapsed, as specified by timeout. + * The read will start when the condition is met, otherwise the command aborts. + * + * The qualifier defined here is not the value that is masked, it defines + * conditions for the write to take place. The actual masked qualifier (and + * other related details) are defined beforehand with _set_shuttle_features(). + */ +static int usbat_write_blocks(struct us_data *us, + unsigned char *buffer, + int len) +{ + int result; + unsigned char *command = us->iobuf; + + command[0] = 0x40; + command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK; + command[2] = USBAT_ATA_DATA; + command[3] = USBAT_ATA_STATUS; + command[4] = 0xFD; // Timeout (ms) + command[5] = USBAT_QUAL_FCQ; + command[6] = LSB_of(len); + command[7] = MSB_of(len); + + // Multiple block write setup command + result = usbat_execute_command(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + // Write the data + result = usbat_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_FAILED; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read the User IO register + */ +static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) +{ + int result; + + result = usb_stor_ctrl_transfer(us, + us->recv_ctrl_pipe, + USBAT_CMD_UIO, + 0xC0, + 0, + 0, + data_flags, + USBAT_UIO_READ); + + US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); + + return result; +} + +/* + * Write to the User IO register + */ +static int usbat_write_user_io(struct us_data *us, + unsigned char enable_flags, + unsigned char data_flags) +{ + return usb_stor_ctrl_transfer(us, + us->send_ctrl_pipe, + USBAT_CMD_UIO, + 0x40, + short_pack(enable_flags, data_flags), + 0, + NULL, + USBAT_UIO_WRITE); +} + +/* + * Reset the device + * Often needed on media change. + */ +static int usbat_device_reset(struct us_data *us) +{ + int rc; + + // Reset peripheral, enable peripheral control signals + // (bring reset signal up) + rc = usbat_write_user_io(us, + USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + // Enable peripheral control signals + // (bring reset signal down) + rc = usbat_write_user_io(us, + USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Enable card detect + */ +static int usbat_device_enable_cdt(struct us_data *us) +{ + int rc; + + // Enable peripheral control signals and card detect + rc = usbat_write_user_io(us, + USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Determine if media is present. + */ +static int usbat_flash_check_media_present(unsigned char *uio) +{ + if (*uio & USBAT_UIO_UI0) { + US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); + return USBAT_FLASH_MEDIA_NONE; + } + + return USBAT_FLASH_MEDIA_CF; +} + +/* + * Determine if media has changed since last operation + */ +static int usbat_flash_check_media_changed(unsigned char *uio) +{ + if (*uio & USBAT_UIO_0) { + US_DEBUGP("usbat_flash_check_media_changed: media change detected\n"); + return USBAT_FLASH_MEDIA_CHANGED; + } + + return USBAT_FLASH_MEDIA_SAME; +} + +/* + * Check for media change / no media and handle the situation appropriately + */ +static int usbat_flash_check_media(struct us_data *us, + struct usbat_info *info) +{ + int rc; + unsigned char *uio = us->iobuf; + + rc = usbat_read_user_io(us, uio); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + // Check for media existance + rc = usbat_flash_check_media_present(uio); + if (rc == USBAT_FLASH_MEDIA_NONE) { + info->sense_key = 0x02; + info->sense_asc = 0x3A; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + // Check for media change + rc = usbat_flash_check_media_changed(uio); + if (rc == USBAT_FLASH_MEDIA_CHANGED) { + + // Reset and re-enable card detect + rc = usbat_device_reset(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + rc = usbat_device_enable_cdt(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + msleep(50); + + rc = usbat_read_user_io(us, uio); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + info->sense_key = UNIT_ATTENTION; + info->sense_asc = 0x28; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Determine whether we are controlling a flash-based reader/writer, + * or a HP8200-based CD drive. + * Sets transport functions as appropriate. + */ +static int usbat_identify_device(struct us_data *us, + struct usbat_info *info) +{ + int rc; + unsigned char status; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_device_reset(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + /* + * By examining the device signature after a reset, we can identify + * whether the device supports the ATAPI packet interface. + * The flash-devices do not support this, whereas the HP CDRW's obviously + * do. + * + * This method is not ideal, but works because no other devices have been + * produced based on the USBAT/USBAT02. + * + * Section 9.1 of the ATAPI-4 spec states (amongst other things) that + * after a device reset, a Cylinder low of 0x14 indicates that the device + * does support packet commands. + */ + rc = usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, &status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("usbat_identify_device: Cylinder low is %02X\n", status); + + if (status == 0x14) { + // Device is HP 8200 + US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); + info->devicetype = USBAT_DEV_HP8200; + } else { + // Device is a CompactFlash reader/writer + US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); + info->devicetype = USBAT_DEV_FLASH; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Set the transport function based on the device type + */ +static int usbat_set_transport(struct us_data *us, + struct usbat_info *info) +{ + int rc; + + if (!info->devicetype) { + rc = usbat_identify_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("usbat_set_transport: Could not identify device\n"); + return 1; + } + } + + if (usbat_get_device_type(us) == USBAT_DEV_HP8200) + us->transport = usbat_hp8200e_transport; + else if (usbat_get_device_type(us) == USBAT_DEV_FLASH) + us->transport = usbat_flash_transport; + + return 0; +} + +/* + * Read the media capacity + */ +static int usbat_flash_get_sector_count(struct us_data *us, + struct usbat_info *info) +{ + unsigned char registers[3] = { + USBAT_ATA_SECCNT, + USBAT_ATA_DEVICE, + USBAT_ATA_CMD, + }; + unsigned char command[3] = { 0x01, 0xA0, 0xEC }; + unsigned char *reply; + unsigned char status; + int rc; + + if (!us || !info) + return USB_STOR_TRANSPORT_ERROR; + + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + // ATAPI command : IDENTIFY DEVICE + rc = usbat_multiple_write(us, registers, command, 3); + if (rc != USB_STOR_XFER_GOOD) { + US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // Read device status + if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + msleep(100); + + // Read the device identification data + rc = usbat_read_block(us, reply, 512); + if (rc != USB_STOR_TRANSPORT_GOOD) + goto leave; + + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + + rc = USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(reply); + return rc; +} + +/* + * Read data from device + */ +static int usbat_flash_read_data(struct us_data *us, + struct usbat_info *info, + u32 sector, + u32 sectors) +{ + unsigned char registers[7] = { + USBAT_ATA_FEATURES, + USBAT_ATA_SECCNT, + USBAT_ATA_SECNUM, + USBAT_ATA_LBA_ME, + USBAT_ATA_LBA_HI, + USBAT_ATA_DEVICE, + USBAT_ATA_STATUS, + }; + unsigned char command[7]; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_idx = 0, sg_offset = 0; + + result = usbat_flash_check_media(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // ATAPI command 0x20 (READ SECTORS) + usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); + + // Write/execute ATAPI read command + result = usbat_multiple_write(us, registers, command, 7); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + // Read the data we just requested + result = usbat_read_blocks(us, buffer, len); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + +leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +/* + * Write data to device + */ +static int usbat_flash_write_data(struct us_data *us, + struct usbat_info *info, + u32 sector, + u32 sectors) +{ + unsigned char registers[7] = { + USBAT_ATA_FEATURES, + USBAT_ATA_SECCNT, + USBAT_ATA_SECNUM, + USBAT_ATA_LBA_ME, + USBAT_ATA_LBA_HI, + USBAT_ATA_DEVICE, + USBAT_ATA_STATUS, + }; + unsigned char command[7]; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_idx = 0, sg_offset = 0; + + result = usbat_flash_check_media(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Jumpshot + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + + if (sector > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg_idx, &sg_offset, FROM_XFER_BUF); + + // ATAPI command 0x30 (WRITE SECTORS) + usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); + + // Write/execute ATAPI write command + result = usbat_multiple_write(us, registers, command, 7); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + // Write the data + result = usbat_write_blocks(us, buffer, len); + if (result != USB_STOR_TRANSPORT_GOOD) + goto leave; + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return result; + +leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + +/* + * Squeeze a potentially huge (> 65535 byte) read10 command into + * a little ( <= 65535 byte) ATAPI pipe + */ +static int usbat_hp8200e_handle_read10(struct us_data *us, + unsigned char *registers, + unsigned char *data, + struct scsi_cmnd *srb) +{ + int result = USB_STOR_TRANSPORT_GOOD; + unsigned char *buffer; + unsigned int len; + unsigned int sector; + unsigned int sg_segment = 0; + unsigned int sg_offset = 0; + + US_DEBUGP("handle_read10: transfersize %d\n", + srb->transfersize); + + if (srb->request_bufflen < 0x10000) { + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_FROM_DEVICE, + srb->request_buffer, + srb->request_bufflen, srb->use_sg, 1); + + return result; + } + + /* + * Since we're requesting more data than we can handle in + * a single read command (max is 64k-1), we will perform + * multiple reads, but each read must be in multiples of + * a sector. Luckily the sector size is in srb->transfersize + * (see linux/drivers/scsi/sr.c). + */ + + if (data[7+0] == GPCMD_READ_CD) { + len = short_pack(data[7+9], data[7+8]); + len <<= 16; + len |= data[7+7]; + US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); + srb->transfersize = srb->request_bufflen/len; + } + + if (!srb->transfersize) { + srb->transfersize = 2048; /* A guess */ + US_DEBUGP("handle_read10: transfersize 0, forcing %d\n", + srb->transfersize); + } + + // Since we only read in one block at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + len = (65535/srb->transfersize) * srb->transfersize; + US_DEBUGP("Max read is %d bytes\n", len); + len = min(len, srb->request_bufflen); + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) // bloody hell! + return USB_STOR_TRANSPORT_FAILED; + sector = short_pack(data[7+3], data[7+2]); + sector <<= 16; + sector |= short_pack(data[7+5], data[7+4]); + transferred = 0; + + sg_segment = 0; // for keeping track of where we are in + sg_offset = 0; // the scatter/gather list + + while (transferred != srb->request_bufflen) { + + if (len > srb->request_bufflen - transferred) + len = srb->request_bufflen - transferred; + + data[3] = len&0xFF; // (cylL) = expected length (L) + data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) + + // Fix up the SCSI command sector and num sectors + + data[7+2] = MSB_of(sector>>16); // SCSI command sector + data[7+3] = LSB_of(sector>>16); + data[7+4] = MSB_of(sector&0xFFFF); + data[7+5] = LSB_of(sector&0xFFFF); + if (data[7+0] == GPCMD_READ_CD) + data[7+6] = 0; + data[7+7] = MSB_of(len / srb->transfersize); // SCSI command + data[7+8] = LSB_of(len / srb->transfersize); // num sectors + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_FROM_DEVICE, + buffer, + len, 0, 1); + + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, srb, + &sg_segment, &sg_offset, TO_XFER_BUF); + + // Update the amount transferred and the sector number + + transferred += len; + sector += len / srb->transfersize; + + } // while transferred != srb->request_bufflen + + kfree(buffer); + return result; +} + +static int usbat_select_and_test_registers(struct us_data *us) +{ + int selector; + unsigned char *status = us->iobuf; + unsigned char max_selector = 0xB0; + if (usbat_get_device_type(us) == USBAT_DEV_FLASH) + max_selector = 0xA0; + + // try device = master, then device = slave. + + for (selector = 0xA0; selector <= max_selector; selector += 0x10) { + + if (usbat_get_device_type(us) == USBAT_DEV_HP8200 && + usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Initialize the USBAT processor and the storage device + */ +int init_usbat(struct us_data *us) +{ + int rc; + struct usbat_info *info; + unsigned char subcountH = USBAT_ATA_LBA_HI; + unsigned char subcountL = USBAT_ATA_LBA_ME; + unsigned char *status = us->iobuf; + + us->extra = kmalloc(sizeof(struct usbat_info), GFP_NOIO); + if (!us->extra) { + US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n"); + return 1; + } + memset(us->extra, 0, sizeof(struct usbat_info)); + info = (struct usbat_info *) (us->extra); + + // Enable peripheral control signals + rc = usbat_write_user_io(us, + USBAT_UIO_OE1 | USBAT_UIO_OE0, + USBAT_UIO_EPAD | USBAT_UIO_1); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 1\n"); + + msleep(2000); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("INIT 2\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 3\n"); + + // At this point, we need to detect which device we are using + if (usbat_set_transport(us, info)) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 4\n"); + + if (usbat_get_device_type(us) == USBAT_DEV_HP8200) { + msleep(250); + + // Write 0x80 to ISA port 0x3F + rc = usbat_write(us, USBAT_ISA, 0x3F, 0x80); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 5\n"); + + // Read ISA port 0x27 + rc = usbat_read(us, USBAT_ISA, 0x27, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 6\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 7\n"); + } + + rc = usbat_select_and_test_registers(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("INIT 8\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 9\n"); + + // Enable peripheral control signals and card detect + rc = usbat_device_enable_cdt(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("INIT 10\n"); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 11\n"); + + msleep(1400); + + rc = usbat_read_user_io(us, status); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 12\n"); + + rc = usbat_select_and_test_registers(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + US_DEBUGP("INIT 13\n"); + + if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { + subcountH = 0x02; + subcountL = 0x00; + } + rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1), + 0x00, 0x88, 0x08, subcountH, subcountL); + if (rc != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("INIT 14\n"); + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Transport for the HP 8200e + */ +static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int result; + unsigned char *status = us->iobuf; + unsigned char registers[32]; + unsigned char data[32]; + unsigned int len; + int i; + char string[64]; + + len = srb->request_bufflen; + + /* Send A0 (ATA PACKET COMMAND). + Note: I guess we're never going to get any of the ATA + commands... just ATA Packet Commands. + */ + + registers[0] = USBAT_ATA_FEATURES; + registers[1] = USBAT_ATA_SECCNT; + registers[2] = USBAT_ATA_SECNUM; + registers[3] = USBAT_ATA_LBA_ME; + registers[4] = USBAT_ATA_LBA_HI; + registers[5] = USBAT_ATA_DEVICE; + registers[6] = USBAT_ATA_CMD; + data[0] = 0x00; + data[1] = 0x00; + data[2] = 0x00; + data[3] = len&0xFF; // (cylL) = expected length (L) + data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) + data[5] = 0xB0; // (device sel) = slave + data[6] = 0xA0; // (command) = ATA PACKET COMMAND + + for (i=7; i<19; i++) { + registers[i] = 0x10; + data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7]; + } + + result = usbat_get_status(us, status); + US_DEBUGP("Status = %02X\n", *status); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + if (srb->cmnd[0] == TEST_UNIT_READY) + transferred = 0; + + if (srb->sc_data_direction == DMA_TO_DEVICE) { + + result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, + registers, data, 19, + USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, + (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), + DMA_TO_DEVICE, + srb->request_buffer, + len, srb->use_sg, 10); + + if (result == USB_STOR_TRANSPORT_GOOD) { + transferred += len; + US_DEBUGP("Wrote %08X bytes\n", transferred); + } + + return result; + + } else if (srb->cmnd[0] == READ_10 || + srb->cmnd[0] == GPCMD_READ_CD) { + + return usbat_hp8200e_handle_read10(us, registers, data, srb); + + } + + if (len > 0xFFFF) { + US_DEBUGP("Error: len = %08X... what do I do now?\n", + len); + return USB_STOR_TRANSPORT_ERROR; + } + + if ( (result = usbat_multiple_write(us, + registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) { + return result; + } + + // Write the 12-byte command header. + + // If the command is BLANK then set the timer for 75 minutes. + // Otherwise set it for 10 minutes. + + // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW + // AT SPEED 4 IS UNRELIABLE!!! + + if ( (result = usbat_write_block(us, + USBAT_ATA, srb->cmnd, 12, + srb->cmnd[0]==GPCMD_BLANK ? 75 : 10)) != + USB_STOR_TRANSPORT_GOOD) { + return result; + } + + // If there is response data to be read in + // then do it here. + + if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { + + // How many bytes to read in? Check cylL register + + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != + USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + + if (len > 0xFF) { // need to read cylH also + len = *status; + if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != + USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + len += ((unsigned int) *status)<<8; + } + else + len = *status; + + + result = usbat_read_block(us, srb->request_buffer, len); + + /* Debug-print the first 32 bytes of the transfer */ + + if (!srb->use_sg) { + string[0] = 0; + for (i=0; i<len && i<32; i++) { + sprintf(string+strlen(string), "%02X ", + ((unsigned char *)srb->request_buffer)[i]); + if ((i%16)==15) { + US_DEBUGP("%s\n", string); + string[0] = 0; + } + } + if (string[0]!=0) + US_DEBUGP("%s\n", string); + } + } + + return result; +} + +/* + * Transport for USBAT02-based CompactFlash and similar storage devices + */ +static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) +{ + int rc; + struct usbat_info *info = (struct usbat_info *) (us->extra); + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[36] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (srb->cmnd[0] == INQUIRY) { + US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + rc = usbat_flash_check_media(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + rc = usbat_flash_get_sector_count(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // note: must return the sector number of the last sector, + // *not* the total number of sectors + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + US_DEBUGP("usbat_flash_transport: Gah! MODE_SELECT_10.\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("usbat_flash_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + return usbat_flash_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // I don't think we'll ever see a READ_12 but support it anyway... + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + return usbat_flash_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + return usbat_flash_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // I don't think we'll ever see a WRITE_12 but support it anyway... + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + return usbat_flash_write_data(us, info, block, blocks); + } + + + if (srb->cmnd[0] == TEST_UNIT_READY) { + US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n"); + + rc = usbat_flash_check_media(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + return usbat_check_status(us); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from popping + // the media out of the device (no locking doors, etc) + return USB_STOR_TRANSPORT_GOOD; + } + + US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Default transport function. Attempts to detect which transport function + * should be called, makes it the new default, and calls it. + * + * This function should never be called. Our usbat_init() function detects the + * device type and changes the us->transport ptr to the transport function + * relevant to the device. + * However, we'll support this impossible(?) case anyway. + */ +int usbat_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct usbat_info *info = (struct usbat_info*) (us->extra); + + if (usbat_set_transport(us, info)) + return USB_STOR_TRANSPORT_ERROR; + + return us->transport(srb, us); +} + diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h new file mode 100644 index 000000000000..5b8e867e2ae5 --- /dev/null +++ b/drivers/usb/storage/shuttle_usbat.h @@ -0,0 +1,123 @@ +/* Driver for SCM Microsystems USB-ATAPI cable + * Header File + * + * $Id: shuttle_usbat.h,v 1.5 2000/09/17 14:44:52 groovyjava Exp $ + * + * Current development and maintenance by: + * (c) 2000 Robert Baruch (autophile@dol.net) + * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> + * + * See shuttle_usbat.c for more explanation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_SHUTTLE_USBAT_H +#define _USB_SHUTTLE_USBAT_H + +/* Supported device types */ +#define USBAT_DEV_HP8200 0x01 +#define USBAT_DEV_FLASH 0x02 + +#define USBAT_EPP_PORT 0x10 +#define USBAT_EPP_REGISTER 0x30 +#define USBAT_ATA 0x40 +#define USBAT_ISA 0x50 + +/* Commands (need to be logically OR'd with an access type */ +#define USBAT_CMD_READ_REG 0x00 +#define USBAT_CMD_WRITE_REG 0x01 +#define USBAT_CMD_READ_BLOCK 0x02 +#define USBAT_CMD_WRITE_BLOCK 0x03 +#define USBAT_CMD_COND_READ_BLOCK 0x04 +#define USBAT_CMD_COND_WRITE_BLOCK 0x05 +#define USBAT_CMD_WRITE_REGS 0x07 + +/* Commands (these don't need an access type) */ +#define USBAT_CMD_EXEC_CMD 0x80 +#define USBAT_CMD_SET_FEAT 0x81 +#define USBAT_CMD_UIO 0x82 + +/* Methods of accessing UIO register */ +#define USBAT_UIO_READ 1 +#define USBAT_UIO_WRITE 0 + +/* Qualifier bits */ +#define USBAT_QUAL_FCQ 0x20 // full compare +#define USBAT_QUAL_ALQ 0x10 // auto load subcount + +/* USBAT Flash Media status types */ +#define USBAT_FLASH_MEDIA_NONE 0 +#define USBAT_FLASH_MEDIA_CF 1 + +/* USBAT Flash Media change types */ +#define USBAT_FLASH_MEDIA_SAME 0 +#define USBAT_FLASH_MEDIA_CHANGED 1 + +/* USBAT ATA registers */ +#define USBAT_ATA_DATA 0x10 // read/write data (R/W) +#define USBAT_ATA_FEATURES 0x11 // set features (W) +#define USBAT_ATA_ERROR 0x11 // error (R) +#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) +#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) +#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) +#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) +#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) +#define USBAT_ATA_STATUS 0x17 // device status (R) +#define USBAT_ATA_CMD 0x17 // device command (W) +#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) + +/* USBAT User I/O Data registers */ +#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals +#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) + // CDT = ACKD & !UI1 & !UI0 +#define USBAT_UIO_1 0x20 // I/O 1 +#define USBAT_UIO_0 0x10 // I/O 0 +#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode +#define USBAT_UIO_UI1 0x04 // Input 1 +#define USBAT_UIO_UI0 0x02 // Input 0 +#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) + +/* USBAT User I/O Enable registers */ +#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral +#define USBAT_UIO_ACKD 0x40 // Enable Card Detect +#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input + // If ACKD=1, set OE1 to 1 also. +#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input +#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip + +/* USBAT Features */ +#define USBAT_FEAT_ETEN 0x80 // External trigger enable +#define USBAT_FEAT_U1 0x08 +#define USBAT_FEAT_U0 0x04 +#define USBAT_FEAT_ET1 0x02 +#define USBAT_FEAT_ET2 0x01 + +extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us); +extern int init_usbat(struct us_data *us); + +struct usbat_info { + int devicetype; + + /* Used for Flash readers only */ + unsigned long sectors; // total sector count + unsigned long ssize; // sector size in bytes + + unsigned char sense_key; + unsigned long sense_asc; // additional sense code + unsigned long sense_ascq; // additional sense code qualifier +}; + +#endif diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c new file mode 100644 index 000000000000..d2c3d2fa082e --- /dev/null +++ b/drivers/usb/storage/transport.c @@ -0,0 +1,1215 @@ +/* Driver for USB Mass Storage compliant devices + * + * $Id: transport.c,v 1.47 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) + * (c) 2002 Alan Stern <stern@rowland.org> + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "scsiglue.h" +#include "debug.h" + + +/*********************************************************************** + * Data transfer routines + ***********************************************************************/ + +/* + * This is subtle, so pay attention: + * --------------------------------- + * We're very concerned about races with a command abort. Hanging this code + * is a sure fire way to hang the kernel. (Note that this discussion applies + * only to transactions resulting from a scsi queued-command, since only + * these transactions are subject to a scsi abort. Other transactions, such + * as those occurring during device-specific initialization, must be handled + * by a separate code path.) + * + * The abort function (usb_storage_command_abort() in scsiglue.c) first + * sets the machine state and the ABORTING bit in us->flags to prevent + * new URBs from being submitted. It then calls usb_stor_stop_transport() + * below, which atomically tests-and-clears the URB_ACTIVE bit in us->flags + * to see if the current_urb needs to be stopped. Likewise, the SG_ACTIVE + * bit is tested to see if the current_sg scatter-gather request needs to be + * stopped. The timeout callback routine does much the same thing. + * + * When a disconnect occurs, the DISCONNECTING bit in us->flags is set to + * prevent new URBs from being submitted, and usb_stor_stop_transport() is + * called to stop any ongoing requests. + * + * The submit function first verifies that the submitting is allowed + * (neither ABORTING nor DISCONNECTING bits are set) and that the submit + * completes without errors, and only then sets the URB_ACTIVE bit. This + * prevents the stop_transport() function from trying to cancel the URB + * while the submit call is underway. Next, the submit function must test + * the flags to see if an abort or disconnect occurred during the submission + * or before the URB_ACTIVE bit was set. If so, it's essential to cancel + * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit + * is still set). Either way, the function must then wait for the URB to + * finish. Note that because the URB_ASYNC_UNLINK flag is set, the URB can + * still be in progress even after a call to usb_unlink_urb() returns. + * + * The idea is that (1) once the ABORTING or DISCONNECTING bit is set, + * either the stop_transport() function or the submitting function + * is guaranteed to call usb_unlink_urb() for an active URB, + * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being + * called more than once or from being called during usb_submit_urb(). + */ + +/* This is the completion handler which will wake us up when an URB + * completes. + */ +static void usb_stor_blocking_completion(struct urb *urb, struct pt_regs *regs) +{ + struct completion *urb_done_ptr = (struct completion *)urb->context; + + complete(urb_done_ptr); +} + +/* This is the timeout handler which will cancel an URB when its timeout + * expires. + */ +static void timeout_handler(unsigned long us_) +{ + struct us_data *us = (struct us_data *) us_; + + if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) { + US_DEBUGP("Timeout -- cancelling URB\n"); + usb_unlink_urb(us->current_urb); + } +} + +/* This is the common part of the URB message submission code + * + * All URBs from the usb-storage driver involved in handling a queued scsi + * command _must_ pass through this function (or something like it) for the + * abort mechanisms to work properly. + */ +static int usb_stor_msg_common(struct us_data *us, int timeout) +{ + struct completion urb_done; + struct timer_list to_timer; + int status; + + /* don't submit URBs during abort/disconnect processing */ + if (us->flags & ABORTING_OR_DISCONNECTING) + return -EIO; + + /* set up data structures for the wakeup system */ + init_completion(&urb_done); + + /* fill the common fields in the URB */ + us->current_urb->context = &urb_done; + us->current_urb->actual_length = 0; + us->current_urb->error_count = 0; + us->current_urb->status = 0; + + /* we assume that if transfer_buffer isn't us->iobuf then it + * hasn't been mapped for DMA. Yes, this is clunky, but it's + * easier than always having the caller tell us whether the + * transfer buffer has already been mapped. */ + us->current_urb->transfer_flags = + URB_ASYNC_UNLINK | URB_NO_SETUP_DMA_MAP; + if (us->current_urb->transfer_buffer == us->iobuf) + us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + us->current_urb->transfer_dma = us->iobuf_dma; + us->current_urb->setup_dma = us->cr_dma; + + /* submit the URB */ + status = usb_submit_urb(us->current_urb, GFP_NOIO); + if (status) { + /* something went wrong */ + return status; + } + + /* since the URB has been submitted successfully, it's now okay + * to cancel it */ + set_bit(US_FLIDX_URB_ACTIVE, &us->flags); + + /* did an abort/disconnect occur during the submission? */ + if (us->flags & ABORTING_OR_DISCONNECTING) { + + /* cancel the URB, if it hasn't been cancelled already */ + if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) { + US_DEBUGP("-- cancelling URB\n"); + usb_unlink_urb(us->current_urb); + } + } + + /* submit the timeout timer, if a timeout was requested */ + if (timeout > 0) { + init_timer(&to_timer); + to_timer.expires = jiffies + timeout; + to_timer.function = timeout_handler; + to_timer.data = (unsigned long) us; + add_timer(&to_timer); + } + + /* wait for the completion of the URB */ + wait_for_completion(&urb_done); + clear_bit(US_FLIDX_URB_ACTIVE, &us->flags); + + /* clean up the timeout timer */ + if (timeout > 0) + del_timer_sync(&to_timer); + + /* return the URB status */ + return us->current_urb->status; +} + +/* + * Transfer one control message, with timeouts, and allowing early + * termination. Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx. + */ +int usb_stor_control_msg(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size, int timeout) +{ + int status; + + US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + __FUNCTION__, request, requesttype, + value, index, size); + + /* fill in the devrequest structure */ + us->cr->bRequestType = requesttype; + us->cr->bRequest = request; + us->cr->wValue = cpu_to_le16(value); + us->cr->wIndex = cpu_to_le16(index); + us->cr->wLength = cpu_to_le16(size); + + /* fill and submit the URB */ + usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, + (unsigned char*) us->cr, data, size, + usb_stor_blocking_completion, NULL); + status = usb_stor_msg_common(us, timeout); + + /* return the actual length of the data transferred if no error */ + if (status == 0) + status = us->current_urb->actual_length; + return status; +} + +/* This is a version of usb_clear_halt() that allows early termination and + * doesn't read the status from the device -- this is because some devices + * crash their internal firmware when the status is requested after a halt. + * + * A definitive list of these 'bad' devices is too difficult to maintain or + * make complete enough to be useful. This problem was first observed on the + * Hagiwara FlashGate DUAL unit. However, bus traces reveal that neither + * MacOS nor Windows checks the status after clearing a halt. + * + * Since many vendors in this space limit their testing to interoperability + * with these two OSes, specification violations like this one are common. + */ +int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) +{ + int result; + int endp = usb_pipeendpoint(pipe); + + if (usb_pipein (pipe)) + endp |= USB_DIR_IN; + + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, + USB_ENDPOINT_HALT, endp, + NULL, 0, 3*HZ); + + /* reset the endpoint toggle */ + usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), + usb_pipeout(pipe), 0); + + US_DEBUGP("%s: result = %d\n", __FUNCTION__, result); + return result; +} + + +/* + * Interpret the results of a URB transfer + * + * This function prints appropriate debugging messages, clears halts on + * non-control endpoints, and translates the status to the corresponding + * USB_STOR_XFER_xxx return code. + */ +static int interpret_urb_result(struct us_data *us, unsigned int pipe, + unsigned int length, int result, unsigned int partial) +{ + US_DEBUGP("Status code %d; transferred %u/%u\n", + result, partial, length); + switch (result) { + + /* no error code; did we send all the data? */ + case 0: + if (partial != length) { + US_DEBUGP("-- short transfer\n"); + return USB_STOR_XFER_SHORT; + } + + US_DEBUGP("-- transfer complete\n"); + return USB_STOR_XFER_GOOD; + + /* stalled */ + case -EPIPE: + /* for control endpoints, (used by CB[I]) a stall indicates + * a failed command */ + if (usb_pipecontrol(pipe)) { + US_DEBUGP("-- stall on control pipe\n"); + return USB_STOR_XFER_STALLED; + } + + /* for other sorts of endpoint, clear the stall */ + US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); + if (usb_stor_clear_halt(us, pipe) < 0) + return USB_STOR_XFER_ERROR; + return USB_STOR_XFER_STALLED; + + /* timeout or excessively long NAK */ + case -ETIMEDOUT: + US_DEBUGP("-- timeout or NAK\n"); + return USB_STOR_XFER_ERROR; + + /* babble - the device tried to send more than we wanted to read */ + case -EOVERFLOW: + US_DEBUGP("-- babble\n"); + return USB_STOR_XFER_LONG; + + /* the transfer was cancelled by abort, disconnect, or timeout */ + case -ECONNRESET: + US_DEBUGP("-- transfer cancelled\n"); + return USB_STOR_XFER_ERROR; + + /* short scatter-gather read transfer */ + case -EREMOTEIO: + US_DEBUGP("-- short read transfer\n"); + return USB_STOR_XFER_SHORT; + + /* abort or disconnect in progress */ + case -EIO: + US_DEBUGP("-- abort or disconnect in progress\n"); + return USB_STOR_XFER_ERROR; + + /* the catch-all error case */ + default: + US_DEBUGP("-- unknown error\n"); + return USB_STOR_XFER_ERROR; + } +} + +/* + * Transfer one control message, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. + */ +int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size) +{ + int result; + + US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + __FUNCTION__, request, requesttype, + value, index, size); + + /* fill in the devrequest structure */ + us->cr->bRequestType = requesttype; + us->cr->bRequest = request; + us->cr->wValue = cpu_to_le16(value); + us->cr->wIndex = cpu_to_le16(index); + us->cr->wLength = cpu_to_le16(size); + + /* fill and submit the URB */ + usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, + (unsigned char*) us->cr, data, size, + usb_stor_blocking_completion, NULL); + result = usb_stor_msg_common(us, 0); + + return interpret_urb_result(us, pipe, size, result, + us->current_urb->actual_length); +} + +/* + * Receive one interrupt buffer, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. + * + * This routine always uses us->recv_intr_pipe as the pipe and + * us->ep_bInterval as the interrupt interval. + */ +static int usb_stor_intr_transfer(struct us_data *us, void *buf, + unsigned int length) +{ + int result; + unsigned int pipe = us->recv_intr_pipe; + unsigned int maxp; + + US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length); + + /* calculate the max packet size */ + maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); + if (maxp > length) + maxp = length; + + /* fill and submit the URB */ + usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf, + maxp, usb_stor_blocking_completion, NULL, + us->ep_bInterval); + result = usb_stor_msg_common(us, 0); + + return interpret_urb_result(us, pipe, length, result, + us->current_urb->actual_length); +} + +/* + * Transfer one buffer via bulk pipe, without timeouts, but allowing early + * termination. Return codes are USB_STOR_XFER_xxx. If the bulk pipe + * stalls during the transfer, the halt is automatically cleared. + */ +int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, unsigned int *act_len) +{ + int result; + + US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length); + + /* fill and submit the URB */ + usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, + usb_stor_blocking_completion, NULL); + result = usb_stor_msg_common(us, 0); + + /* store the actual length of the data transferred */ + if (act_len) + *act_len = us->current_urb->actual_length; + return interpret_urb_result(us, pipe, length, result, + us->current_urb->actual_length); +} + +/* + * Transfer a scatter-gather list via bulk transfer + * + * This function does basically the same thing as usb_stor_bulk_transfer_buf() + * above, but it uses the usbcore scatter-gather library. + */ +static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, + struct scatterlist *sg, int num_sg, unsigned int length, + unsigned int *act_len) +{ + int result; + + /* don't submit s-g requests during abort/disconnect processing */ + if (us->flags & ABORTING_OR_DISCONNECTING) + return USB_STOR_XFER_ERROR; + + /* initialize the scatter-gather request block */ + US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__, + length, num_sg); + result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, + sg, num_sg, length, SLAB_NOIO); + if (result) { + US_DEBUGP("usb_sg_init returned %d\n", result); + return USB_STOR_XFER_ERROR; + } + + /* since the block has been initialized successfully, it's now + * okay to cancel it */ + set_bit(US_FLIDX_SG_ACTIVE, &us->flags); + + /* did an abort/disconnect occur during the submission? */ + if (us->flags & ABORTING_OR_DISCONNECTING) { + + /* cancel the request, if it hasn't been cancelled already */ + if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) { + US_DEBUGP("-- cancelling sg request\n"); + usb_sg_cancel(&us->current_sg); + } + } + + /* wait for the completion of the transfer */ + usb_sg_wait(&us->current_sg); + clear_bit(US_FLIDX_SG_ACTIVE, &us->flags); + + result = us->current_sg.status; + if (act_len) + *act_len = us->current_sg.bytes; + return interpret_urb_result(us, pipe, length, result, + us->current_sg.bytes); +} + +/* + * Transfer an entire SCSI command's worth of data payload over the bulk + * pipe. + * + * Note that this uses usb_stor_bulk_transfer_buf() and + * usb_stor_bulk_transfer_sglist() to achieve its goals -- + * this function simply determines whether we're going to use + * scatter-gather or not, and acts appropriately. + */ +int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, + void *buf, unsigned int length_left, int use_sg, int *residual) +{ + int result; + unsigned int partial; + + /* are we scatter-gathering? */ + if (use_sg) { + /* use the usb core scatter-gather primitives */ + result = usb_stor_bulk_transfer_sglist(us, pipe, + (struct scatterlist *) buf, use_sg, + length_left, &partial); + length_left -= partial; + } else { + /* no scatter-gather, just make the request */ + result = usb_stor_bulk_transfer_buf(us, pipe, buf, + length_left, &partial); + length_left -= partial; + } + + /* store the residual and return the error code */ + if (residual) + *residual = length_left; + return result; +} + +/*********************************************************************** + * Transport routines + ***********************************************************************/ + +/* Invoke the transport and basic error-handling/recovery methods + * + * This is used by the protocol layers to actually send the message to + * the device and receive the response. + */ +void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int need_auto_sense; + int result; + + /* send the command to the transport layer */ + srb->resid = 0; + result = us->transport(srb, us); + + /* if the command gets aborted by the higher layers, we need to + * short-circuit all other processing + */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { + US_DEBUGP("-- command was aborted\n"); + goto Handle_Abort; + } + + /* if there is a transport error, reset and don't auto-sense */ + if (result == USB_STOR_TRANSPORT_ERROR) { + US_DEBUGP("-- transport indicates error, resetting\n"); + us->transport_reset(us); + srb->result = DID_ERROR << 16; + return; + } + + /* if the transport provided its own sense data, don't auto-sense */ + if (result == USB_STOR_TRANSPORT_NO_SENSE) { + srb->result = SAM_STAT_CHECK_CONDITION; + return; + } + + srb->result = SAM_STAT_GOOD; + + /* Determine if we need to auto-sense + * + * I normally don't use a flag like this, but it's almost impossible + * to understand what's going on here if I don't. + */ + need_auto_sense = 0; + + /* + * If we're running the CB transport, which is incapable + * of determining status on its own, we will auto-sense + * unless the operation involved a data-in transfer. Devices + * can signal most data-in errors by stalling the bulk-in pipe. + */ + if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) && + srb->sc_data_direction != DMA_FROM_DEVICE) { + US_DEBUGP("-- CB transport device requiring auto-sense\n"); + need_auto_sense = 1; + } + + /* + * If we have a failure, we're going to do a REQUEST_SENSE + * automatically. Note that we differentiate between a command + * "failure" and an "error" in the transport mechanism. + */ + if (result == USB_STOR_TRANSPORT_FAILED) { + US_DEBUGP("-- transport indicates command failure\n"); + need_auto_sense = 1; + } + + /* + * A short transfer on a command where we don't expect it + * is unusual, but it doesn't mean we need to auto-sense. + */ + if ((srb->resid > 0) && + !((srb->cmnd[0] == REQUEST_SENSE) || + (srb->cmnd[0] == INQUIRY) || + (srb->cmnd[0] == MODE_SENSE) || + (srb->cmnd[0] == LOG_SENSE) || + (srb->cmnd[0] == MODE_SENSE_10))) { + US_DEBUGP("-- unexpectedly short transfer\n"); + } + + /* Now, if we need to do the auto-sense, let's do it */ + if (need_auto_sense) { + int temp_result; + void* old_request_buffer; + unsigned short old_sg; + unsigned old_request_bufflen; + unsigned char old_sc_data_direction; + unsigned char old_cmd_len; + unsigned char old_cmnd[MAX_COMMAND_SIZE]; + unsigned long old_serial_number; + int old_resid; + + US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); + + /* save the old command */ + memcpy(old_cmnd, srb->cmnd, MAX_COMMAND_SIZE); + old_cmd_len = srb->cmd_len; + + /* set the command and the LUN */ + memset(srb->cmnd, 0, MAX_COMMAND_SIZE); + srb->cmnd[0] = REQUEST_SENSE; + srb->cmnd[1] = old_cmnd[1] & 0xE0; + srb->cmnd[4] = 18; + + /* FIXME: we must do the protocol translation here */ + if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI) + srb->cmd_len = 6; + else + srb->cmd_len = 12; + + /* set the transfer direction */ + old_sc_data_direction = srb->sc_data_direction; + srb->sc_data_direction = DMA_FROM_DEVICE; + + /* use the new buffer we have */ + old_request_buffer = srb->request_buffer; + srb->request_buffer = srb->sense_buffer; + + /* set the buffer length for transfer */ + old_request_bufflen = srb->request_bufflen; + srb->request_bufflen = 18; + + /* set up for no scatter-gather use */ + old_sg = srb->use_sg; + srb->use_sg = 0; + + /* change the serial number -- toggle the high bit*/ + old_serial_number = srb->serial_number; + srb->serial_number ^= 0x80000000; + + /* issue the auto-sense command */ + old_resid = srb->resid; + srb->resid = 0; + temp_result = us->transport(us->srb, us); + + /* let's clean up right away */ + srb->resid = old_resid; + srb->request_buffer = old_request_buffer; + srb->request_bufflen = old_request_bufflen; + srb->use_sg = old_sg; + srb->serial_number = old_serial_number; + srb->sc_data_direction = old_sc_data_direction; + srb->cmd_len = old_cmd_len; + memcpy(srb->cmnd, old_cmnd, MAX_COMMAND_SIZE); + + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { + US_DEBUGP("-- auto-sense aborted\n"); + goto Handle_Abort; + } + if (temp_result != USB_STOR_TRANSPORT_GOOD) { + US_DEBUGP("-- auto-sense failure\n"); + + /* we skip the reset if this happens to be a + * multi-target device, since failure of an + * auto-sense is perfectly valid + */ + if (!(us->flags & US_FL_SCM_MULT_TARG)) + us->transport_reset(us); + srb->result = DID_ERROR << 16; + return; + } + + US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); + US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", + srb->sense_buffer[0], + srb->sense_buffer[2] & 0xf, + srb->sense_buffer[12], + srb->sense_buffer[13]); +#ifdef CONFIG_USB_STORAGE_DEBUG + usb_stor_show_sense( + srb->sense_buffer[2] & 0xf, + srb->sense_buffer[12], + srb->sense_buffer[13]); +#endif + + /* set the result so the higher layers expect this data */ + srb->result = SAM_STAT_CHECK_CONDITION; + + /* If things are really okay, then let's show that. Zero + * out the sense buffer so the higher layers won't realize + * we did an unsolicited auto-sense. */ + if (result == USB_STOR_TRANSPORT_GOOD && + /* Filemark 0, ignore EOM, ILI 0, no sense */ + (srb->sense_buffer[2] & 0xaf) == 0 && + /* No ASC or ASCQ */ + srb->sense_buffer[12] == 0 && + srb->sense_buffer[13] == 0) { + srb->result = SAM_STAT_GOOD; + srb->sense_buffer[0] = 0x0; + } + } + + /* Did we transfer less than the minimum amount required? */ + if (srb->result == SAM_STAT_GOOD && + srb->request_bufflen - srb->resid < srb->underflow) + srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); + + return; + + /* abort processing: the bulk-only transport requires a reset + * following an abort */ + Handle_Abort: + srb->result = DID_ABORT << 16; + if (us->protocol == US_PR_BULK) + us->transport_reset(us); +} + +/* Stop the current URB transfer */ +void usb_stor_stop_transport(struct us_data *us) +{ + US_DEBUGP("%s called\n", __FUNCTION__); + + /* If the state machine is blocked waiting for an URB, + * let's wake it up. The test_and_clear_bit() call + * guarantees that if a URB has just been submitted, + * it won't be cancelled more than once. */ + if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) { + US_DEBUGP("-- cancelling URB\n"); + usb_unlink_urb(us->current_urb); + } + + /* If we are waiting for a scatter-gather operation, cancel it. */ + if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) { + US_DEBUGP("-- cancelling sg request\n"); + usb_sg_cancel(&us->current_sg); + } +} + +/* + * Control/Bulk/Interrupt transport + */ + +int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + unsigned int transfer_length = srb->request_bufflen; + unsigned int pipe = 0; + int result; + + /* COMMAND STAGE */ + /* let's send the command via the control pipe */ + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + US_CBI_ADSC, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, + us->ifnum, srb->cmnd, srb->cmd_len); + + /* check the return code for the command */ + US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); + + /* if we stalled the command, it means command failed */ + if (result == USB_STOR_XFER_STALLED) { + return USB_STOR_TRANSPORT_FAILED; + } + + /* Uh oh... serious problem here */ + if (result != USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + + /* DATA STAGE */ + /* transfer the data payload for this command, if one exists*/ + if (transfer_length) { + pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_sg(us, pipe, + srb->request_buffer, transfer_length, + srb->use_sg, &srb->resid); + US_DEBUGP("CBI data stage result is 0x%x\n", result); + + /* if we stalled the data transfer it means command failed */ + if (result == USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_FAILED; + if (result > USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_ERROR; + } + + /* STATUS STAGE */ + result = usb_stor_intr_transfer(us, us->iobuf, 2); + US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n", + us->iobuf[0], us->iobuf[1]); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* UFI gives us ASC and ASCQ, like a request sense + * + * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI + * devices, so we ignore the information for those commands. Note + * that this means we could be ignoring a real error on these + * commands, but that can't be helped. + */ + if (us->subclass == US_SC_UFI) { + if (srb->cmnd[0] == REQUEST_SENSE || + srb->cmnd[0] == INQUIRY) + return USB_STOR_TRANSPORT_GOOD; + if (us->iobuf[0]) + goto Failed; + return USB_STOR_TRANSPORT_GOOD; + } + + /* If not UFI, we interpret the data as a result code + * The first byte should always be a 0x0. + * + * Some bogus devices don't follow that rule. They stuff the ASC + * into the first byte -- so if it's non-zero, call it a failure. + */ + if (us->iobuf[0]) { + US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n", + us->iobuf[0]); + goto Failed; + + } + + /* The second byte & 0x0F should be 0x0 for good, otherwise error */ + switch (us->iobuf[1] & 0x0F) { + case 0x00: + return USB_STOR_TRANSPORT_GOOD; + case 0x01: + goto Failed; + } + return USB_STOR_TRANSPORT_ERROR; + + /* the CBI spec requires that the bulk pipe must be cleared + * following any data-in/out command failure (section 2.4.3.1.3) + */ + Failed: + if (pipe) + usb_stor_clear_halt(us, pipe); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Control/Bulk transport + */ +int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + unsigned int transfer_length = srb->request_bufflen; + int result; + + /* COMMAND STAGE */ + /* let's send the command via the control pipe */ + result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + US_CBI_ADSC, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, + us->ifnum, srb->cmnd, srb->cmd_len); + + /* check the return code for the command */ + US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); + + /* if we stalled the command, it means command failed */ + if (result == USB_STOR_XFER_STALLED) { + return USB_STOR_TRANSPORT_FAILED; + } + + /* Uh oh... serious problem here */ + if (result != USB_STOR_XFER_GOOD) { + return USB_STOR_TRANSPORT_ERROR; + } + + /* DATA STAGE */ + /* transfer the data payload for this command, if one exists*/ + if (transfer_length) { + unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_sg(us, pipe, + srb->request_buffer, transfer_length, + srb->use_sg, &srb->resid); + US_DEBUGP("CB data stage result is 0x%x\n", result); + + /* if we stalled the data transfer it means command failed */ + if (result == USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_FAILED; + if (result > USB_STOR_XFER_STALLED) + return USB_STOR_TRANSPORT_ERROR; + } + + /* STATUS STAGE */ + /* NOTE: CB does not have a status stage. Silly, I know. So + * we have to catch this at a higher level. + */ + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Bulk only transport + */ + +/* Determine what the maximum LUN supported is */ +int usb_stor_Bulk_max_lun(struct us_data *us) +{ + int result; + + /* issue the command */ + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + US_BULK_GET_MAX_LUN, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, 1, HZ); + + US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); + + /* if we have a successful request, return the result */ + if (result > 0) + return us->iobuf[0]; + + /* + * Some devices (i.e. Iomega Zip100) need this -- apparently + * the bulk pipes get STALLed when the GetMaxLUN request is + * processed. This is, in theory, harmless to all other devices + * (regardless of if they stall or not). + */ + if (result == -EPIPE) { + usb_stor_clear_halt(us, us->recv_bulk_pipe); + usb_stor_clear_halt(us, us->send_bulk_pipe); + } + + /* + * Some devices don't like GetMaxLUN. They may STALL the control + * pipe, they may return a zero-length result, they may do nothing at + * all and timeout, or they may fail in even more bizarrely creative + * ways. In these cases the best approach is to use the default + * value: only one LUN. + */ + return 0; +} + +int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + unsigned int transfer_length = srb->request_bufflen; + unsigned int residue; + int result; + int fake_sense = 0; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* Take care of BULK32 devices; set extra byte to 0 */ + if ( unlikely(us->flags & US_FL_BULK32)) { + cbwlen = 32; + us->iobuf[31] = 0; + } + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(transfer_length); + bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0; + bcb->Tag = srb->serial_number; + bcb->Lun = srb->device->lun; + if (us->flags & US_FL_SCM_MULT_TARG) + bcb->Lun |= srb->device->id << 4; + bcb->Length = srb->cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, srb->cmnd, bcb->Length); + + /* send it to out endpoint */ + US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", + le32_to_cpu(bcb->Signature), bcb->Tag, + le32_to_cpu(bcb->DataTransferLength), bcb->Flags, + (bcb->Lun >> 4), (bcb->Lun & 0x0F), + bcb->Length); + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + US_DEBUGP("Bulk command transfer result=%d\n", result); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + /* Some USB-IDE converter chips need a 100us delay between the + * command phase and the data phase. Some devices need a little + * more than that, probably because of clock rate inaccuracies. */ + if (unlikely(us->flags & US_FL_GO_SLOW)) + udelay(110); + + if (transfer_length) { + unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_sg(us, pipe, + srb->request_buffer, transfer_length, + srb->use_sg, &srb->resid); + US_DEBUGP("Bulk data transfer result 0x%x\n", result); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + + /* If the device tried to send back more data than the + * amount requested, the spec requires us to transfer + * the CSW anyway. Since there's no point retrying the + * the command, we'll return fake sense data indicating + * Illegal Request, Invalid Field in CDB. + */ + if (result == USB_STOR_XFER_LONG) + fake_sense = 1; + } + + /* See flow chart on pg 15 of the Bulk Only Transport spec for + * an explanation of how this code works. + */ + + /* get CSW for device status */ + US_DEBUGP("Attempting to get CSW...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + + /* Some broken devices add unnecessary zero-length packets to the + * end of their data transfers. Such packets show up as 0-length + * CSWs. If we encounter such a thing, try to read the CSW again. + */ + if (result == USB_STOR_XFER_SHORT && cswlen == 0) { + US_DEBUGP("Received 0-length CSW; retrying...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + } + + /* did the attempt to read the CSW fail? */ + if (result == USB_STOR_XFER_STALLED) { + + /* get the status again */ + US_DEBUGP("Attempting to get CSW (2nd try)...\n"); + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, NULL); + } + + /* if we still have a failure at this point, we're in trouble */ + US_DEBUGP("Bulk status result = %d\n", result); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* check bulk status */ + residue = le32_to_cpu(bcs->Residue); + US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", + le32_to_cpu(bcs->Signature), bcs->Tag, + residue, bcs->Status); + if (bcs->Tag != srb->serial_number || bcs->Status > US_BULK_STAT_PHASE) { + US_DEBUGP("Bulk logical error\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Some broken devices report odd signatures, so we do not check them + * for validity against the spec. We store the first one we see, + * and check subsequent transfers for validity against this signature. + */ + if (!us->bcs_signature) { + us->bcs_signature = bcs->Signature; + if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) + US_DEBUGP("Learnt BCS signature 0x%08X\n", + le32_to_cpu(us->bcs_signature)); + } else if (bcs->Signature != us->bcs_signature) { + US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), + le32_to_cpu(us->bcs_signature)); + return USB_STOR_TRANSPORT_ERROR; + } + + /* try to compute the actual residue, based on how much data + * was really transferred and what the device tells us */ + if (residue) { + if (!(us->flags & US_FL_IGNORE_RESIDUE)) { + residue = min(residue, transfer_length); + srb->resid = max(srb->resid, (int) residue); + } + } + + /* based on the status code, we report good or bad */ + switch (bcs->Status) { + case US_BULK_STAT_OK: + /* device babbled -- return fake sense data */ + if (fake_sense) { + memcpy(srb->sense_buffer, + usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); + return USB_STOR_TRANSPORT_NO_SENSE; + } + + /* command good -- note that data could be short */ + return USB_STOR_TRANSPORT_GOOD; + + case US_BULK_STAT_FAIL: + /* command failed */ + return USB_STOR_TRANSPORT_FAILED; + + case US_BULK_STAT_PHASE: + /* phase error -- note that a transport reset will be + * invoked by the invoke_transport() function + */ + return USB_STOR_TRANSPORT_ERROR; + } + + /* we should never get here, but if we do, we're in trouble */ + return USB_STOR_TRANSPORT_ERROR; +} + +/*********************************************************************** + * Reset routines + ***********************************************************************/ + +/* This is the common part of the device reset code. + * + * It's handy that every transport mechanism uses the control endpoint for + * resets. + * + * Basically, we send a reset with a 20-second timeout, so we don't get + * jammed attempting to do the reset. + */ +static int usb_stor_reset_common(struct us_data *us, + u8 request, u8 requesttype, + u16 value, u16 index, void *data, u16 size) +{ + int result; + int result2; + int rc = FAILED; + + /* Let the SCSI layer know we are doing a reset, set the + * RESETTING bit, and clear the ABORTING bit so that the reset + * may proceed. + */ + scsi_lock(us_to_host(us)); + usb_stor_report_device_reset(us); + set_bit(US_FLIDX_RESETTING, &us->flags); + clear_bit(US_FLIDX_ABORTING, &us->flags); + scsi_unlock(us_to_host(us)); + + /* A 20-second timeout may seem rather long, but a LaCie + * StudioDrive USB2 device takes 16+ seconds to get going + * following a powerup or USB attach event. + */ + result = usb_stor_control_msg(us, us->send_ctrl_pipe, + request, requesttype, value, index, data, size, + 20*HZ); + if (result < 0) { + US_DEBUGP("Soft reset failed: %d\n", result); + goto Done; + } + + /* Give the device some time to recover from the reset, + * but don't delay disconnect processing. */ + wait_event_interruptible_timeout(us->delay_wait, + test_bit(US_FLIDX_DISCONNECTING, &us->flags), + HZ*6); + if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + US_DEBUGP("Reset interrupted by disconnect\n"); + goto Done; + } + + US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n"); + result = usb_stor_clear_halt(us, us->recv_bulk_pipe); + + US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n"); + result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); + + /* return a result code based on the result of the control message */ + if (result < 0 || result2 < 0) { + US_DEBUGP("Soft reset failed\n"); + goto Done; + } + US_DEBUGP("Soft reset done\n"); + rc = SUCCESS; + + Done: + clear_bit(US_FLIDX_RESETTING, &us->flags); + return rc; +} + +/* This issues a CB[I] Reset to the device in question + */ +#define CB_RESET_CMD_SIZE 12 + +int usb_stor_CB_reset(struct us_data *us) +{ + US_DEBUGP("%s called\n", __FUNCTION__); + + memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); + us->iobuf[0] = SEND_DIAGNOSTIC; + us->iobuf[1] = 4; + return usb_stor_reset_common(us, US_CBI_ADSC, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); +} + +/* This issues a Bulk-only Reset to the device in question, including + * clearing the subsequent endpoint halts that may occur. + */ +int usb_stor_Bulk_reset(struct us_data *us) +{ + US_DEBUGP("%s called\n", __FUNCTION__); + + return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, NULL, 0); +} diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h new file mode 100644 index 000000000000..e25f8d8fc741 --- /dev/null +++ b/drivers/usb/storage/transport.h @@ -0,0 +1,174 @@ +/* Driver for USB Mass Storage compliant devices + * Transport Functions Header File + * + * $Id: transport.h,v 1.18 2002/04/21 02:57:59 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _TRANSPORT_H_ +#define _TRANSPORT_H_ + +#include <linux/config.h> +#include <linux/blkdev.h> + +/* Protocols */ + +#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define US_PR_BULK 0x50 /* bulk only */ +#ifdef CONFIG_USB_STORAGE_USBAT +#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR09 +#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ +#endif +#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ + +#ifdef CONFIG_USB_STORAGE_FREECOM +#define US_PR_FREECOM 0xf1 /* Freecom */ +#endif + +#ifdef CONFIG_USB_STORAGE_DATAFAB +#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ +#endif + +#ifdef CONFIG_USB_STORAGE_JUMPSHOT +#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ +#endif + +#define US_PR_DEVICE 0xff /* Use device's value */ + +/* + * Bulk only data structures + */ + +/* command block wrapper */ +struct bulk_cb_wrap { + __le32 Signature; /* contains 'USBC' */ + __u32 Tag; /* unique per command id */ + __le32 DataTransferLength; /* size of data */ + __u8 Flags; /* direction in bit 0 */ + __u8 Lun; /* LUN normally 0 */ + __u8 Length; /* of of the CDB */ + __u8 CDB[16]; /* max command */ +}; + +#define US_BULK_CB_WRAP_LEN 31 +#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */ +#define US_BULK_FLAG_IN 1 +#define US_BULK_FLAG_OUT 0 + +/* command status wrapper */ +struct bulk_cs_wrap { + __le32 Signature; /* should = 'USBS' */ + __u32 Tag; /* same as original command */ + __le32 Residue; /* amount not transferred */ + __u8 Status; /* see below */ + __u8 Filler[18]; +}; + +#define US_BULK_CS_WRAP_LEN 13 +#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */ +#define US_BULK_STAT_OK 0 +#define US_BULK_STAT_FAIL 1 +#define US_BULK_STAT_PHASE 2 + +/* bulk-only class specific requests */ +#define US_BULK_RESET_REQUEST 0xff +#define US_BULK_GET_MAX_LUN 0xfe + +/* + * usb_stor_bulk_transfer_xxx() return codes, in order of severity + */ + +#define USB_STOR_XFER_GOOD 0 /* good transfer */ +#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */ +#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */ +#define USB_STOR_XFER_LONG 3 /* device tried to send too much */ +#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */ + +/* + * Transport return codes + */ + +#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */ +#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */ +#define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */ +#define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */ + +/* + * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED + * return codes. But now the transport and low-level transfer routines + * treat an abort as just another error (-ENOENT for a cancelled URB). + * It is up to the invoke_transport() function to test for aborts and + * distinguish them from genuine communication errors. + */ + +/* + * CBI accept device specific command + */ + +#define US_CBI_ADSC 0 + +extern int usb_stor_CBI_transport(struct scsi_cmnd *, struct us_data*); + +extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*); +extern int usb_stor_CB_reset(struct us_data*); + +extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*); +extern int usb_stor_Bulk_max_lun(struct us_data*); +extern int usb_stor_Bulk_reset(struct us_data*); + +extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*); +extern void usb_stor_stop_transport(struct us_data*); + +extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size, int timeout); +extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe); + +extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, + u8 request, u8 requesttype, u16 value, u16 index, + void *data, u16 size); +extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, unsigned int *act_len); +extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe, + void *buf, unsigned int length, int use_sg, int *residual); + +#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h new file mode 100644 index 000000000000..d53f777c4f50 --- /dev/null +++ b/drivers/usb/storage/unusual_devs.h @@ -0,0 +1,986 @@ +/* Driver for USB Mass Storage compliant devices + * Ununsual Devices File + * + * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* IMPORTANT NOTE: This file must be included in another file which does + * the following thing for it to work: + * The macro UNUSUAL_DEV() must be defined before this file is included + */ +#include <linux/config.h> + +/* If you edit this file, please try to keep it sorted first by VendorID, + * then by ProductID. + * + * If you want to add an entry for this file, be sure to include the + * following information: + * - a patch that adds the entry for your device, including your + * email address right above the entry (plus maybe a brief + * explanation of the reason for the entry), + * - a copy of /proc/bus/usb/devices with your device plugged in + * running with this patch. + * Send your submission to either Phil Dibowitz <phil@ipom.com> or + * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the + * USB development list <linux-usb-devel@lists.sourceforge.net>. + */ + +UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0100, + "Mitsumi", + "USB FDD", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, + "HP", + "CD-Writer+", + US_SC_8070, US_PR_CB, NULL, 0), + +#ifdef CONFIG_USB_STORAGE_USBAT +UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, + "HP", + "CD-Writer+ 8200e", + US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + +UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, + "HP", + "CD-Writer+ CD-4e", + US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), +#endif + +/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au> + * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message + * always fails and confuses drive. + */ +UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, + "Buffalo", + "DUB-P40G HDD", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +#ifdef CONFIG_USB_STORAGE_DPCM +UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), +#endif + +/* Patch submitted by Philipp Friedrich <philipp@void.at> */ +UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, + "Kyocera", + "Finecam S3x", + US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Patch submitted by Philipp Friedrich <philipp@void.at> */ +UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100, + "Kyocera", + "Finecam S4", + US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */ +UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, + "Kyocera", + "Finecam S5", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), + +/* Patch for Kyocera Finecam L3 + * Submitted by Michael Krauth <michael.krauth@web.de> + * and Alessandro Fracchetti <al.fracchetti@tin.it> + */ +UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100, + "Kyocera", + "Finecam L3", + US_SC_SCSI, US_PR_BULK, NULL, + US_FL_FIX_INQUIRY), + +/* Reported by Paul Stewart <stewart@wetlogic.net> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, + "Hitachi", + "DVD-CAM DZ-MV100A Camcorder", + US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN), + +/* Reported by Andreas Bockhold <andreas@bockionline.de> */ +UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100, + "NIKON", + "NIKON DSC D70", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +/* BENQ DC5330 + * Reported by Manuel Fombuena <mfombuena@ya.com> and + * Frank Copeland <fjc@thingy.apana.org.au> */ +UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Simon Levitt <simon@whattf.com> + * This entry needs Sub and Proto fields */ +UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, + "Epson", + "875DC Storage", + US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY), + +/* Reported by Khalid Aziz <khalid@gonehiking.org> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110, + "Epson", + "785EPX Storage", + US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN), + +/* Not sure who reported this originally but + * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN + * flag be added */ +UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210, + "Fujifilm", + "FinePix 1400Zoom", + US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN), + +/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de> + * The device needs the flags only. + */ +UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074, + "ScanLogic", + "SL11R-IDE", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY), + +/* Reported by Kriston Fincher <kriston@airmail.net> + * Patch submitted by Sean Millichamp <sean@bruenor.org> + * This is to support the Panasonic PalmCam PV-SD4090 + * This entry is needed because the device reports Sub=ff + */ +UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200, + "Panasonic", + "LS-120 Camera", + US_SC_UFI, US_PR_DEVICE, NULL, 0), + +/* From Yukihiro Nakai, via zaitcev@yahoo.com. + * This is needed for CB instead of CBI */ +UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000, + "Sharp CE-CW05", + "CD-R/RW Drive", + US_SC_8070, US_PR_CB, NULL, 0), + +/* Reported by Adriaan Penning <a.penning@luon.net> */ +UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, + "Panasonic", + "DMC-LCx Camera", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + +/* Most of the following entries were developed with the help of + * Shuttle/SCM directly. + */ +UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200, + "Matshita", + "LS-120", + US_SC_8020, US_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +#ifdef CONFIG_USB_STORAGE_SDDR09 +UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR09", + US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, + US_FL_SINGLE_LUN ), + +/* This entry is from Andries.Brouwer@cwi.nl */ +UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, + "SCM Microsystems", + "eUSB SmartMedia / CompactFlash Adapter", + US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, + 0), +#endif + +/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */ +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100, + "SCM Microsystems Inc.", + "eUSB MMC Adapter", + US_SC_SCSI, US_PR_CB, NULL, + US_FL_SINGLE_LUN), + +/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */ +UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205, + "Shuttle", + "eUSB MMC Adapter", + US_SC_SCSI, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200, + "Sony", + "Hifd", + US_SC_SCSI, US_PR_CB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200, + "Shuttle", + "eUSB ATA/ATAPI Adapter", + US_SC_8020, US_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200, + "Shuttle", + "eUSB CompactFlash Adapter", + US_SC_8020, US_PR_CB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100, + "Shuttle", + "eUSCSI Bridge", + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, + "Shuttle", + "CD-RW Device", + US_SC_8020, US_PR_CB, NULL, 0), + +/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. + * Device uses standards-violating 32-byte Bulk Command Block Wrappers and + * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. + */ + +UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, + "Kobian Mercury", + "Binocam DCB-132", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_BULK32), + +#ifdef CONFIG_USB_STORAGE_USBAT +UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, + "SCM", + "SCM USBAT-02", + US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, + US_FL_SINGLE_LUN), +#endif + +/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ +UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, + "Belkin", + "USB SCSI Adaptor", + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +/* Iomega Clik! Drive + * Reported by David Chatenay <dchatenay@hotmail.com> + * The reason this is needed is not fully known. + */ +UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, + "Iomega", + "USB Clik! 40", + US_SC_8070, US_PR_BULK, NULL, + US_FL_FIX_INQUIRY ), + +/* Yakumo Mega Image 37 + * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ +UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Another Yakumo camera. + * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */ +UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */ +UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "300_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Yakumo Mega Image 47 + * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */ +UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "400_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Paul Ortyl <ortylp@3miasto.net> + * Note that it's similar to the device above, only different prodID */ +UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100, + "Tekom Technologies, Inc", + "400_CAMERA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, + "Sony", + "DSC-S30/S70/S75/505V/F505/F707/F717/P8", + US_SC_SCSI, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), + +/* This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500, + "Sony", + "DSC-T1", + US_SC_8070, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + + +/* Reported by wim@geeks.nl */ +UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, + "Sony", + "Memorystick NW-MS7", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +#ifdef CONFIG_USB_STORAGE_ISD200 +UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, + "Sony", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), +#endif + +/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ +UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x0501, + "Sony", + "USB Floppy Drive", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100, + "Sony", + "Memorystick MSAC-US1", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Klaus Mueller <k.mueller@intershop.de> */ +UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310, + "Sony", + "Handycam", + US_SC_SCSI, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */ +UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500, + "Sony", + "Handycam HC-85", + US_SC_UFI, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999, + "Sony", + "Memorystick MSC-U01N", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Michal Mlotek <mlotek@foobar.pl> */ +UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999, + "Sony", + "PEG N760c Memorystick", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999, + "Sony", + "Memorystick MSC-U03", + US_SC_UFI, US_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +/* Submitted by Nathan Babb <nathan@lexi.com> */ +UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */ +UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */ +UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, + "Sony", + "PEG Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + + +UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, + "Y-E Data", + "Flashbuster-U", + US_SC_DEVICE, US_PR_CB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, + "Y-E Data", + "Flashbuster-U", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN), + +/* Reported by Johann Cardon <johann.cardon@free.fr> + * This entry is needed only because the device reports + * bInterfaceClass = 0xff (vendor-specific) + */ +UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, + "Y-E Data", + "Silicon Media R/W", + US_SC_DEVICE, US_PR_DEVICE, NULL, 0), + +/* Fabrizio Fellini <fello@libero.it> */ +UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, + "Fujifilm", + "Digital Camera EX-20 DSC", + US_SC_8070, US_PR_DEVICE, NULL, 0 ), + +/* The entry was here before I took over, and had US_SC_RBC. It turns + * out that isn't needed. Additionally, Torsten Eriksson + * <Torsten.Eriksson@bergianska.se> is able to use his device fine + * without this entry at all - but I don't suspect that will be true + * for all users (the protocol is likely needed), so is staying at + * this time. - Phil Dibowitz <phil@ipom.com> + */ +UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, + "LaCie", + "USB Hard Disk", + US_SC_DEVICE, US_PR_CB, NULL, 0 ), + +/* Submitted by Joel Bourquard <numlock@freesurf.ch> + * Some versions of this device need the SubClass and Protocol overrides + * while others don't. + */ +UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, + "In-System", + "PyroGate External CD-ROM Enclosure (FCD-523)", + US_SC_SCSI, US_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +#ifdef CONFIG_USB_STORAGE_ISD200 +UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, + "In-System", + "USB/IDE Bridge (ATA/ATAPI)", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), + +UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), + +UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), + +UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, + "In-System", + "USB Storage Adapter V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), +#endif + +/* Reported by Avi Kivity <avi@argo.co.il> */ +UNUSUAL_DEV( 0x05ac, 0x1203, 0x0001, 0x0001, + "Apple", + "iPod", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +UNUSUAL_DEV( 0x05ac, 0x1205, 0x0001, 0x0001, + "Apple", + "iPod", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +#ifdef CONFIG_USB_STORAGE_JUMPSHOT +UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, + "Lexar", + "Jumpshot USB CF Reader", + US_SC_SCSI, US_PR_JUMPSHOT, NULL, + US_FL_NEED_OVERRIDE ), +#endif + +/* Reported by Blake Matheny <bmatheny@purdue.edu> */ +UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, + "Lexar", + "USB CF Reader", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* The following two entries are for a Genesys USB to IDE + * converter chip, but it changes its ProductId depending + * on whether or not a disk or an optical device is enclosed + * They were originally reported by Alexander Oltu + * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> + * respectively. + */ +UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, + "Genesys Logic", + "USB to IDE Optical", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + +UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, + "Genesys Logic", + "USB to IDE Disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + +/* Reported by Hanno Boeck <hanno@gmx.de> + * Taken from the Lycoris Kernel */ +UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999, + "Vivitar", + "Vivicam 35Xx", + US_SC_SCSI, US_PR_BULK, NULL, + US_FL_FIX_INQUIRY ), + +UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, + "TEAC", + "Floppy Drive", + US_SC_UFI, US_PR_CB, NULL, 0 ), + +#ifdef CONFIG_USB_STORAGE_SDDR09 +UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, + "Olympus", + "Camedia MAUSB-2", + US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, + US_FL_SINGLE_LUN ), +#endif + +/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ +UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, + "SigmaTel", + "USBMSC Audio Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ +UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100, + "Prolific Technology Inc.", + "Mass Storage Device", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), + +/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */ +UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001, + "Prolific Technology Inc.", + "ATAPI-6 Bridge Controller", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_GO_SLOW ), + +/* Submitted by Benny Sjostrand <benny@hostmobility.com> */ +UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001, + "Minolta", + "Dimage F300", + US_SC_SCSI, US_PR_BULK, NULL, 0 ), + +/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */ +UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, + "Minolta", + "DIMAGE E223", + US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), + +UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100, + "Hagiwara", + "FlashGate SmartMedia", + US_SC_SCSI, US_PR_BULK, NULL, 0 ), + +UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, + "Hagiwara", + "Flashgate", + US_SC_SCSI, US_PR_BULK, NULL, 0 ), + +UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, + "Sandisk", + "ImageMate SDDR-05a", + US_SC_SCSI, US_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, + "Sandisk", + "ImageMate SDDR-12", + US_SC_SCSI, US_PR_CB, NULL, + US_FL_SINGLE_LUN ), + +#ifdef CONFIG_USB_STORAGE_SDDR09 +UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR-09", + US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, + US_FL_SINGLE_LUN ), +#endif + +#ifdef CONFIG_USB_STORAGE_FREECOM +UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, + "Freecom", + "USB-IDE", + US_SC_QIC, US_PR_FREECOM, freecom_init, 0), +#endif + +/* Reported by Eero Volotinen <eero@ping-viini.org> */ +UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406, + "Freecom Technologies", + "FHD-Classic", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + +UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, + "Microtech", + "USB-SCSI-DB25", + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, + "Microtech", + "USB-SCSI-HD50", + US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +#ifdef CONFIG_USB_STORAGE_DPCM +UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), +#endif + +#ifdef CONFIG_USB_STORAGE_DATAFAB +UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, + "Datafab", + "MDCFE-B USB CF Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), + +/* + * The following Datafab-based devices may or may not work + * using the current driver...the 0xffff is arbitrary since I + * don't know what device versions exist for these guys. + * + * The 0xa003 and 0xa004 devices in particular I'm curious about. + * I'm told they exist but so far nobody has come forward to say that + * they work with this driver. Given the success we've had getting + * other Datafab-based cards operational with this driver, I've decided + * to leave these two devices in the list. + */ +UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, + "SIIG/Datafab", + "SIIG/Datafab Memory Stick+CF Reader/Writer", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), + +/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */ +UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, + "Datafab/Unknown", + "MD2/MD3 Disk enclosure", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN ), + +UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), + +UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), + +UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, + "PNY/Datafab", + "PNY/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), + +UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, + "Simple Tech/Datafab", + "Simple Tech/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), +#endif + +#ifdef CONFIG_USB_STORAGE_SDDR55 +/* Contributed by Peter Waechtler */ +UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, + "Datafab", + "MDSM-B reader", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_FIX_INQUIRY ), +#endif + +#ifdef CONFIG_USB_STORAGE_DATAFAB +/* Submitted by Olaf Hering <olh@suse.de> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0 ), +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +/* SM part - aeb <Andries.Brouwer@cwi.nl> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_SINGLE_LUN ), +#endif + +/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 + * Only revision 1.13 tested (same for all of the above devices, + * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. + * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>. + * See also http://martin.wilck.bei.t-online.de/#kecf . + */ +UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, + "Datafab", + "KECF-USB", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant + * to the USB storage specification in two ways: + * - They tell us they are using transport protocol CBI. In reality they + * are using transport protocol CB. + * - They don't like the INQUIRY command. So we must handle this command + * of the SCSI layer ourselves. + * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have + * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB). + * So don't remove the US_PR_CB override! + * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override. + */ +UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999, + "Casio", + "QV DigitalCamera", + US_SC_8070, US_PR_CB, NULL, + US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ), + +/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/ +UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, + "Samsung", + "Digimax 410", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY), + +/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. + * Flag will support Bulk devices which use a standards-violating 32-byte + * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with + * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support. + */ + +UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, + "Grandtech", + "DC2MEGA", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_BULK32), + + +/* Entry needed for flags. Moreover, all devices with this ID use + * bulk-only transport, but _some_ falsely report Control/Bulk instead. + * One example is "Trumpion Digital Research MYMP3". + * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de> + */ +UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, + "Trumpion", + "t33520 USB Flash Card Controller", + US_SC_DEVICE, US_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + +/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ +UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, + "Trumpion", + "MP3 player", + US_SC_RBC, US_PR_BULK, NULL, + 0 ), + +/* aeb */ +UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, + "Feiya", + "5-in-1 Card Reader", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* This Pentax still camera is not conformant + * to the USB storage specification: - + * - It does not like the INQUIRY command. So we must handle this command + * of the SCSI layer ourselves. + * Tested on Rev. 10.00 (0x1000) + * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk> + */ +UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, + "Pentax", + "Optio 2/3/400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + + +/* Submitted by Per Winkvist <per.winkvist@uk.com> */ +UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, + "Pentax", + "Optio S/S4", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +#ifdef CONFIG_USB_STORAGE_ISD200 +UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, + "ATI", + "USB Cable 205", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0 ), +#endif + +#ifdef CONFIG_USB_STORAGE_DATAFAB +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "CF", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN ), +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "SM", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_SINGLE_LUN ), +#endif + +/* Submitted by Joris Struyve <joris@struyve.be> */ +UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, + "Medion", + "MD 7425", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY), + +/* + * Entry for Jenoptik JD 5200z3 + * + * email: car.busse@gmx.de + */ +UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200, + "Jenoptik", + "JD 5200 z3", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), + +/* Reported by Lubomir Blaha <tritol@trilogic.cz> + * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this + * works for me. Can anybody correct these values? (I able to test corrected + * version.) + */ +UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff, + "Netac", + "USB-CF-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Patch by Stephan Walter <stephan.walter@epfl.ch> + * I don't know why, but it works... */ +UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012, + "WINWARD", + "Music Disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Ian McConnell <ian at emit.demon.co.uk> */ +UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, + "PNP_MP3", + "PNP_MP3 PLAYER", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ +UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, + "USB", + "Solid state disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_INQUIRY ), + +/* Submitted by Daniel Drake <dsd@gentoo.org> + * Reported by dayul on the Gentoo Forums */ +UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110, + "Ours Technology", + "Flash Disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */ +UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, + "USB", + "Flash Disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Michael Stattmann <michael@stattmann.com> */ +UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, + "Sony Ericsson", + "V800-Vodafone 802", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT ), + +/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> + * Tested on hardware version 1.10. + * Entry is needed only for the initializer function override. + */ +UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999, + "Desknote", + "UCR-61S2B", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, + 0 ), + +/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ +UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, + "SWISSBIT", + "Black Silver", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ +UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, + "MPIO", + "HS200", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_GO_SLOW ), + +#ifdef CONFIG_USB_STORAGE_SDDR55 +UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR55", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_SINGLE_LUN), +#endif diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c new file mode 100644 index 000000000000..35c1ca6b5a8e --- /dev/null +++ b/drivers/usb/storage/usb.c @@ -0,0 +1,1051 @@ +/* Driver for USB Mass Storage compliant devices + * + * $Id: usb.c,v 1.75 2002/04/22 03:39:43 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Developed with the assistance of: + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 2003 Alan Stern (stern@rowland.harvard.edu) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * usb_device_id support by Adam J. Richter (adam@yggdrasil.com): + * (c) 2000 Yggdrasil Computing, Inc. + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/suspend.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> + +#include "usb.h" +#include "scsiglue.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "initializers.h" + +#ifdef CONFIG_USB_STORAGE_USBAT +#include "shuttle_usbat.h" +#endif +#ifdef CONFIG_USB_STORAGE_SDDR09 +#include "sddr09.h" +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +#include "sddr55.h" +#endif +#ifdef CONFIG_USB_STORAGE_DPCM +#include "dpcm.h" +#endif +#ifdef CONFIG_USB_STORAGE_FREECOM +#include "freecom.h" +#endif +#ifdef CONFIG_USB_STORAGE_ISD200 +#include "isd200.h" +#endif +#ifdef CONFIG_USB_STORAGE_DATAFAB +#include "datafab.h" +#endif +#ifdef CONFIG_USB_STORAGE_JUMPSHOT +#include "jumpshot.h" +#endif + + +/* Some informational data */ +MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); +MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); +MODULE_LICENSE("GPL"); + +static unsigned int delay_use = 5; +module_param(delay_use, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); + + +/* These are used to make sure the module doesn't unload before all the + * threads have exited. + */ +static atomic_t total_threads = ATOMIC_INIT(0); +static DECLARE_COMPLETION(threads_gone); + + +static int storage_probe(struct usb_interface *iface, + const struct usb_device_id *id); + +static void storage_disconnect(struct usb_interface *iface); + +/* The entries in this table, except for final ones here + * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, + * line for line with the entries of us_unsuaul_dev_list[]. + */ + +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName,useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) } + +static struct usb_device_id storage_usb_ids [] = { + +# include "unusual_devs.h" +#undef UNUSUAL_DEV + /* Control/Bulk transport for all SubClass values */ + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) }, + + /* Control/Bulk/Interrupt transport for all SubClass values */ + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) }, + + /* Bulk-only transport for all SubClass values */ + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) }, + { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, + + /* Terminating entry */ + { } +}; + +MODULE_DEVICE_TABLE (usb, storage_usb_ids); + +/* This is the list of devices we recognize, along with their flag data */ + +/* The vendor name should be kept at eight characters or less, and + * the product name should be kept at 16 characters or less. If a device + * has the US_FL_FIX_INQUIRY flag, then the vendor and product names + * normally generated by a device thorugh the INQUIRY response will be + * taken from this list, and this is the reason for the above size + * restriction. However, if the flag is not present, then you + * are free to use as many characters as you like. + */ + +#undef UNUSUAL_DEV +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ + .flags = Flags, \ +} + +static struct us_unusual_dev us_unusual_dev_list[] = { +# include "unusual_devs.h" +# undef UNUSUAL_DEV + /* Control/Bulk transport for all SubClass values */ + { .useProtocol = US_SC_RBC, + .useTransport = US_PR_CB}, + { .useProtocol = US_SC_8020, + .useTransport = US_PR_CB}, + { .useProtocol = US_SC_QIC, + .useTransport = US_PR_CB}, + { .useProtocol = US_SC_UFI, + .useTransport = US_PR_CB}, + { .useProtocol = US_SC_8070, + .useTransport = US_PR_CB}, + { .useProtocol = US_SC_SCSI, + .useTransport = US_PR_CB}, + + /* Control/Bulk/Interrupt transport for all SubClass values */ + { .useProtocol = US_SC_RBC, + .useTransport = US_PR_CBI}, + { .useProtocol = US_SC_8020, + .useTransport = US_PR_CBI}, + { .useProtocol = US_SC_QIC, + .useTransport = US_PR_CBI}, + { .useProtocol = US_SC_UFI, + .useTransport = US_PR_CBI}, + { .useProtocol = US_SC_8070, + .useTransport = US_PR_CBI}, + { .useProtocol = US_SC_SCSI, + .useTransport = US_PR_CBI}, + + /* Bulk-only transport for all SubClass values */ + { .useProtocol = US_SC_RBC, + .useTransport = US_PR_BULK}, + { .useProtocol = US_SC_8020, + .useTransport = US_PR_BULK}, + { .useProtocol = US_SC_QIC, + .useTransport = US_PR_BULK}, + { .useProtocol = US_SC_UFI, + .useTransport = US_PR_BULK}, + { .useProtocol = US_SC_8070, + .useTransport = US_PR_BULK}, + { .useProtocol = US_SC_SCSI, + .useTransport = US_PR_BULK}, + + /* Terminating entry */ + { NULL } +}; + +static struct usb_driver usb_storage_driver = { + .owner = THIS_MODULE, + .name = "usb-storage", + .probe = storage_probe, + .disconnect = storage_disconnect, + .id_table = storage_usb_ids, +}; + +/* + * fill_inquiry_response takes an unsigned char array (which must + * be at least 36 characters) and populates the vendor name, + * product name, and revision fields. Then the array is copied + * into the SCSI command's response buffer (oddly enough + * called request_buffer). data_len contains the length of the + * data array, which again must be at least 36. + */ + +void fill_inquiry_response(struct us_data *us, unsigned char *data, + unsigned int data_len) +{ + if (data_len<36) // You lose. + return; + + if(data[0]&0x20) { /* USB device currently not connected. Return + peripheral qualifier 001b ("...however, the + physical device is not currently connected + to this logical unit") and leave vendor and + product identification empty. ("If the target + does store some of the INQUIRY data on the + device, it may return zeros or ASCII spaces + (20h) in those fields until the data is + available from the device."). */ + memset(data+8,0,28); + } else { + u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice); + memcpy(data+8, us->unusual_dev->vendorName, + strlen(us->unusual_dev->vendorName) > 8 ? 8 : + strlen(us->unusual_dev->vendorName)); + memcpy(data+16, us->unusual_dev->productName, + strlen(us->unusual_dev->productName) > 16 ? 16 : + strlen(us->unusual_dev->productName)); + data[32] = 0x30 + ((bcdDevice>>12) & 0x0F); + data[33] = 0x30 + ((bcdDevice>>8) & 0x0F); + data[34] = 0x30 + ((bcdDevice>>4) & 0x0F); + data[35] = 0x30 + ((bcdDevice) & 0x0F); + } + + usb_stor_set_xfer_buf(data, data_len, us->srb); +} + +static int usb_stor_control_thread(void * __us) +{ + struct us_data *us = (struct us_data *)__us; + struct Scsi_Host *host = us_to_host(us); + + lock_kernel(); + + /* + * This thread doesn't need any user-level access, + * so get rid of all our resources. + */ + daemonize("usb-storage"); + current->flags |= PF_NOFREEZE; + unlock_kernel(); + + /* acquire a reference to the host, so it won't be deallocated + * until we're ready to exit */ + scsi_host_get(host); + + /* signal that we've started the thread */ + complete(&(us->notify)); + + for(;;) { + US_DEBUGP("*** thread sleeping.\n"); + if(down_interruptible(&us->sema)) + break; + + US_DEBUGP("*** thread awakened.\n"); + + /* lock the device pointers */ + down(&(us->dev_semaphore)); + + /* if the device has disconnected, we are free to exit */ + if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + US_DEBUGP("-- exiting\n"); + up(&(us->dev_semaphore)); + break; + } + + /* lock access to the state */ + scsi_lock(host); + + /* has the command timed out *already* ? */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { + us->srb->result = DID_ABORT << 16; + goto SkipForAbort; + } + + scsi_unlock(host); + + /* reject the command if the direction indicator + * is UNKNOWN + */ + if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { + US_DEBUGP("UNKNOWN data direction\n"); + us->srb->result = DID_ERROR << 16; + } + + /* reject if target != 0 or if LUN is higher than + * the maximum known LUN + */ + else if (us->srb->device->id && + !(us->flags & US_FL_SCM_MULT_TARG)) { + US_DEBUGP("Bad target number (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); + us->srb->result = DID_BAD_TARGET << 16; + } + + else if (us->srb->device->lun > us->max_lun) { + US_DEBUGP("Bad LUN (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); + us->srb->result = DID_BAD_TARGET << 16; + } + + /* Handle those devices which need us to fake + * their inquiry data */ + else if ((us->srb->cmnd[0] == INQUIRY) && + (us->flags & US_FL_FIX_INQUIRY)) { + unsigned char data_ptr[36] = { + 0x00, 0x80, 0x02, 0x02, + 0x1F, 0x00, 0x00, 0x00}; + + US_DEBUGP("Faking INQUIRY command\n"); + fill_inquiry_response(us, data_ptr, 36); + us->srb->result = SAM_STAT_GOOD; + } + + /* we've got a command, let's do it! */ + else { + US_DEBUG(usb_stor_show_command(us->srb)); + us->proto_handler(us->srb, us); + } + + /* lock access to the state */ + scsi_lock(host); + + /* indicate that the command is done */ + if (us->srb->result != DID_ABORT << 16) { + US_DEBUGP("scsi cmd done, result=0x%x\n", + us->srb->result); + us->srb->scsi_done(us->srb); + } else { +SkipForAbort: + US_DEBUGP("scsi command aborted\n"); + } + + /* If an abort request was received we need to signal that + * the abort has finished. The proper test for this is + * the TIMED_OUT flag, not srb->result == DID_ABORT, because + * a timeout/abort request might be received after all the + * USB processing was complete. */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) + complete(&(us->notify)); + + /* finished working on this command */ + us->srb = NULL; + scsi_unlock(host); + + /* unlock the device pointers */ + up(&(us->dev_semaphore)); + } /* for (;;) */ + + scsi_host_put(host); + + /* notify the exit routine that we're actually exiting now + * + * complete()/wait_for_completion() is similar to up()/down(), + * except that complete() is safe in the case where the structure + * is getting deleted in a parallel mode of execution (i.e. just + * after the down() -- that's necessary for the thread-shutdown + * case. + * + * complete_and_exit() goes even further than this -- it is safe in + * the case that the thread of the caller is going away (not just + * the structure) -- this is necessary for the module-remove case. + * This is important in preemption kernels, which transfer the flow + * of execution immediately upon a complete(). + */ + complete_and_exit(&threads_gone, 0); +} + +/*********************************************************************** + * Device probing and disconnecting + ***********************************************************************/ + +/* Associate our private data with the USB device */ +static int associate_dev(struct us_data *us, struct usb_interface *intf) +{ + US_DEBUGP("-- %s\n", __FUNCTION__); + + /* Fill in the device-related fields */ + us->pusb_dev = interface_to_usbdev(intf); + us->pusb_intf = intf; + us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", + le16_to_cpu(us->pusb_dev->descriptor.idVendor), + le16_to_cpu(us->pusb_dev->descriptor.idProduct), + le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); + US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n", + intf->cur_altsetting->desc.bInterfaceSubClass, + intf->cur_altsetting->desc.bInterfaceProtocol); + + /* Store our private data in the interface */ + usb_set_intfdata(intf, us); + + /* Allocate the device-related DMA-mapped buffers */ + us->cr = usb_buffer_alloc(us->pusb_dev, sizeof(*us->cr), + GFP_KERNEL, &us->cr_dma); + if (!us->cr) { + US_DEBUGP("usb_ctrlrequest allocation failed\n"); + return -ENOMEM; + } + + us->iobuf = usb_buffer_alloc(us->pusb_dev, US_IOBUF_SIZE, + GFP_KERNEL, &us->iobuf_dma); + if (!us->iobuf) { + US_DEBUGP("I/O buffer allocation failed\n"); + return -ENOMEM; + } + return 0; +} + +/* Get the unusual_devs entries and the string descriptors */ +static void get_device_info(struct us_data *us, int id_index) +{ + struct usb_device *dev = us->pusb_dev; + struct usb_interface_descriptor *idesc = + &us->pusb_intf->cur_altsetting->desc; + struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index]; + struct usb_device_id *id = &storage_usb_ids[id_index]; + + /* Store the entries */ + us->unusual_dev = unusual_dev; + us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ? + idesc->bInterfaceSubClass : + unusual_dev->useProtocol; + us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ? + idesc->bInterfaceProtocol : + unusual_dev->useTransport; + us->flags = unusual_dev->flags; + + /* + * This flag is only needed when we're in high-speed, so let's + * disable it if we're in full-speed + */ + if (dev->speed != USB_SPEED_HIGH) + us->flags &= ~US_FL_GO_SLOW; + + /* Log a message if a non-generic unusual_dev entry contains an + * unnecessary subclass or protocol override. This may stimulate + * reports from users that will help us remove unneeded entries + * from the unusual_devs.h table. + */ + if (id->idVendor || id->idProduct) { + static char *msgs[3] = { + "an unneeded SubClass entry", + "an unneeded Protocol entry", + "unneeded SubClass and Protocol entries"}; + struct usb_device_descriptor *ddesc = &dev->descriptor; + int msg = -1; + + if (unusual_dev->useProtocol != US_SC_DEVICE && + us->subclass == idesc->bInterfaceSubClass) + msg += 1; + if (unusual_dev->useTransport != US_PR_DEVICE && + us->protocol == idesc->bInterfaceProtocol) + msg += 2; + if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE)) + printk(KERN_NOTICE USB_STORAGE "This device " + "(%04x,%04x,%04x S %02x P %02x)" + " has %s in unusual_devs.h\n" + " Please send a copy of this message to " + "<linux-usb-devel@lists.sourceforge.net>\n", + le16_to_cpu(ddesc->idVendor), + le16_to_cpu(ddesc->idProduct), + le16_to_cpu(ddesc->bcdDevice), + idesc->bInterfaceSubClass, + idesc->bInterfaceProtocol, + msgs[msg]); + } +} + +/* Get the transport settings */ +static int get_transport(struct us_data *us) +{ + switch (us->protocol) { + case US_PR_CB: + us->transport_name = "Control/Bulk"; + us->transport = usb_stor_CB_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 7; + break; + + case US_PR_CBI: + us->transport_name = "Control/Bulk/Interrupt"; + us->transport = usb_stor_CBI_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 7; + break; + + case US_PR_BULK: + us->transport_name = "Bulk"; + us->transport = usb_stor_Bulk_transport; + us->transport_reset = usb_stor_Bulk_reset; + break; + +#ifdef CONFIG_USB_STORAGE_USBAT + case US_PR_SCM_ATAPI: + us->transport_name = "SCM/ATAPI"; + us->transport = usbat_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_SDDR09 + case US_PR_EUSB_SDDR09: + us->transport_name = "EUSB/SDDR09"; + us->transport = sddr09_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 0; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_SDDR55 + case US_PR_SDDR55: + us->transport_name = "SDDR55"; + us->transport = sddr55_transport; + us->transport_reset = sddr55_reset; + us->max_lun = 0; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_DPCM + case US_PR_DPCM_USB: + us->transport_name = "Control/Bulk-EUSB/SDDR09"; + us->transport = dpcm_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_FREECOM + case US_PR_FREECOM: + us->transport_name = "Freecom"; + us->transport = freecom_transport; + us->transport_reset = usb_stor_freecom_reset; + us->max_lun = 0; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_DATAFAB + case US_PR_DATAFAB: + us->transport_name = "Datafab Bulk-Only"; + us->transport = datafab_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + break; +#endif + +#ifdef CONFIG_USB_STORAGE_JUMPSHOT + case US_PR_JUMPSHOT: + us->transport_name = "Lexar Jumpshot Control/Bulk"; + us->transport = jumpshot_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + break; +#endif + + default: + return -EIO; + } + US_DEBUGP("Transport: %s\n", us->transport_name); + + /* fix for single-lun devices */ + if (us->flags & US_FL_SINGLE_LUN) + us->max_lun = 0; + return 0; +} + +/* Get the protocol settings */ +static int get_protocol(struct us_data *us) +{ + switch (us->subclass) { + case US_SC_RBC: + us->protocol_name = "Reduced Block Commands (RBC)"; + us->proto_handler = usb_stor_transparent_scsi_command; + break; + + case US_SC_8020: + us->protocol_name = "8020i"; + us->proto_handler = usb_stor_ATAPI_command; + us->max_lun = 0; + break; + + case US_SC_QIC: + us->protocol_name = "QIC-157"; + us->proto_handler = usb_stor_qic157_command; + us->max_lun = 0; + break; + + case US_SC_8070: + us->protocol_name = "8070i"; + us->proto_handler = usb_stor_ATAPI_command; + us->max_lun = 0; + break; + + case US_SC_SCSI: + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + break; + + case US_SC_UFI: + us->protocol_name = "Uniform Floppy Interface (UFI)"; + us->proto_handler = usb_stor_ufi_command; + break; + +#ifdef CONFIG_USB_STORAGE_ISD200 + case US_SC_ISD200: + us->protocol_name = "ISD200 ATA/ATAPI"; + us->proto_handler = isd200_ata_command; + break; +#endif + + default: + return -EIO; + } + US_DEBUGP("Protocol: %s\n", us->protocol_name); + return 0; +} + +/* Get the pipe settings */ +static int get_pipes(struct us_data *us) +{ + struct usb_host_interface *altsetting = + us->pusb_intf->cur_altsetting; + int i; + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + struct usb_endpoint_descriptor *ep_int = NULL; + + /* + * Find the endpoints we need. + * We are expecting a minimum of 2 endpoints - in and out (bulk). + * An optional interrupt is OK (necessary for CBI protocol). + * We will ignore any others. + */ + for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { + ep = &altsetting->endpoint[i].desc; + + /* Is it a BULK endpoint? */ + if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK) { + /* BULK in or out? */ + if (ep->bEndpointAddress & USB_DIR_IN) + ep_in = ep; + else + ep_out = ep; + } + + /* Is it an interrupt endpoint? */ + else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT) { + ep_int = ep; + } + } + + if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) { + US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); + return -EIO; + } + + /* Calculate and store the pipe values */ + us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); + us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); + us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, + ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, + ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + if (ep_int) { + us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, + ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + us->ep_bInterval = ep_int->bInterval; + } + return 0; +} + +/* Initialize all the dynamic resources we need */ +static int usb_stor_acquire_resources(struct us_data *us) +{ + int p; + + us->current_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!us->current_urb) { + US_DEBUGP("URB allocation failed\n"); + return -ENOMEM; + } + + /* Lock the device while we carry out the next two operations */ + down(&us->dev_semaphore); + + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == US_PR_BULK) { + p = usb_stor_Bulk_max_lun(us); + if (p < 0) { + up(&us->dev_semaphore); + return p; + } + us->max_lun = p; + } + + /* Just before we start our control thread, initialize + * the device if it needs initialization */ + if (us->unusual_dev->initFunction) + us->unusual_dev->initFunction(us); + + up(&us->dev_semaphore); + + /* Start up our control thread */ + p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); + if (p < 0) { + printk(KERN_WARNING USB_STORAGE + "Unable to start control thread\n"); + return p; + } + us->pid = p; + atomic_inc(&total_threads); + + /* Wait for the thread to start */ + wait_for_completion(&(us->notify)); + + return 0; +} + +/* Release all our dynamic resources */ +static void usb_stor_release_resources(struct us_data *us) +{ + US_DEBUGP("-- %s\n", __FUNCTION__); + + /* Tell the control thread to exit. The SCSI host must + * already have been removed so it won't try to queue + * any more commands. + */ + US_DEBUGP("-- sending exit command to thread\n"); + up(&us->sema); + + /* Call the destructor routine, if it exists */ + if (us->extra_destructor) { + US_DEBUGP("-- calling extra_destructor()\n"); + us->extra_destructor(us->extra); + } + + /* Free the extra data and the URB */ + kfree(us->extra); + usb_free_urb(us->current_urb); +} + +/* Dissociate from the USB device */ +static void dissociate_dev(struct us_data *us) +{ + US_DEBUGP("-- %s\n", __FUNCTION__); + + /* Free the device-related DMA-mapped buffers */ + if (us->cr) + usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr, + us->cr_dma); + if (us->iobuf) + usb_buffer_free(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, + us->iobuf_dma); + + /* Remove our private data from the interface */ + usb_set_intfdata(us->pusb_intf, NULL); +} + +/* Thread to carry out delayed SCSI-device scanning */ +static int usb_stor_scan_thread(void * __us) +{ + struct us_data *us = (struct us_data *)__us; + + /* + * This thread doesn't need any user-level access, + * so get rid of all our resources. + */ + lock_kernel(); + daemonize("usb-stor-scan"); + unlock_kernel(); + + /* Acquire a reference to the host, so it won't be deallocated + * until we're ready to exit */ + scsi_host_get(us_to_host(us)); + + /* Signal that we've started the thread */ + complete(&(us->notify)); + + printk(KERN_DEBUG + "usb-storage: device found at %d\n", us->pusb_dev->devnum); + + /* Wait for the timeout to expire or for a disconnect */ + if (delay_use > 0) { + printk(KERN_DEBUG "usb-storage: waiting for device " + "to settle before scanning\n"); +retry: + wait_event_interruptible_timeout(us->delay_wait, + test_bit(US_FLIDX_DISCONNECTING, &us->flags), + delay_use * HZ); + if (current->flags & PF_FREEZE) { + refrigerator(PF_FREEZE); + goto retry; + } + } + + /* If the device is still connected, perform the scanning */ + if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + scsi_scan_host(us_to_host(us)); + printk(KERN_DEBUG "usb-storage: device scan complete\n"); + + /* Should we unbind if no devices were detected? */ + } + + scsi_host_put(us_to_host(us)); + complete_and_exit(&threads_gone, 0); +} + + +/* Probe to see if we can drive a newly-connected USB device */ +static int storage_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct Scsi_Host *host; + struct us_data *us; + const int id_index = id - storage_usb_ids; + int result; + + US_DEBUGP("USB Mass Storage device detected\n"); + + /* + * Ask the SCSI layer to allocate a host structure, with extra + * space at the end for our private us_data structure. + */ + host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); + if (!host) { + printk(KERN_WARNING USB_STORAGE + "Unable to allocate the scsi host\n"); + return -ENOMEM; + } + + us = host_to_us(host); + memset(us, 0, sizeof(struct us_data)); + init_MUTEX(&(us->dev_semaphore)); + init_MUTEX_LOCKED(&(us->sema)); + init_completion(&(us->notify)); + init_waitqueue_head(&us->delay_wait); + + /* Associate the us_data structure with the USB device */ + result = associate_dev(us, intf); + if (result) + goto BadDevice; + + /* + * Get the unusual_devs entries and the descriptors + * + * id_index is calculated in the declaration to be the index number + * of the match from the usb_device_id table, so we can find the + * corresponding entry in the private table. + */ + get_device_info(us, id_index); + +#ifdef CONFIG_USB_STORAGE_SDDR09 + if (us->protocol == US_PR_EUSB_SDDR09 || + us->protocol == US_PR_DPCM_USB) { + /* set the configuration -- STALL is an acceptable response here */ + if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { + US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev + ->actconfig->desc.bConfigurationValue); + goto BadDevice; + } + result = usb_reset_configuration(us->pusb_dev); + + US_DEBUGP("Result of usb_reset_configuration is %d\n", result); + if (result == -EPIPE) { + US_DEBUGP("-- stall on control interface\n"); + } else if (result != 0) { + /* it's not a stall, but another error -- time to bail */ + US_DEBUGP("-- Unknown error. Rejecting device\n"); + goto BadDevice; + } + } +#endif + + /* Get the transport, protocol, and pipe settings */ + result = get_transport(us); + if (result) + goto BadDevice; + result = get_protocol(us); + if (result) + goto BadDevice; + result = get_pipes(us); + if (result) + goto BadDevice; + + /* Acquire all the other resources and add the host */ + result = usb_stor_acquire_resources(us); + if (result) + goto BadDevice; + result = scsi_add_host(host, &intf->dev); + if (result) { + printk(KERN_WARNING USB_STORAGE + "Unable to add the scsi host\n"); + goto BadDevice; + } + + /* Start up the thread for delayed SCSI-device scanning */ + result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM); + if (result < 0) { + printk(KERN_WARNING USB_STORAGE + "Unable to start the device-scanning thread\n"); + scsi_remove_host(host); + goto BadDevice; + } + atomic_inc(&total_threads); + + /* Wait for the thread to start */ + wait_for_completion(&(us->notify)); + + return 0; + + /* We come here if there are any problems */ +BadDevice: + US_DEBUGP("storage_probe() failed\n"); + set_bit(US_FLIDX_DISCONNECTING, &us->flags); + usb_stor_release_resources(us); + dissociate_dev(us); + scsi_host_put(host); + return result; +} + +/* Handle a disconnect event from the USB core */ +static void storage_disconnect(struct usb_interface *intf) +{ + struct us_data *us = usb_get_intfdata(intf); + + US_DEBUGP("storage_disconnect() called\n"); + + /* Prevent new USB transfers, stop the current command, and + * interrupt a SCSI-scan or device-reset delay */ + set_bit(US_FLIDX_DISCONNECTING, &us->flags); + usb_stor_stop_transport(us); + wake_up(&us->delay_wait); + + /* It doesn't matter if the SCSI-scanning thread is still running. + * The thread will exit when it sees the DISCONNECTING flag. */ + + /* Wait for the current command to finish, then remove the host */ + down(&us->dev_semaphore); + up(&us->dev_semaphore); + scsi_remove_host(us_to_host(us)); + + /* Wait for everything to become idle and release all our resources */ + usb_stor_release_resources(us); + dissociate_dev(us); + + /* Drop our reference to the host; the SCSI core will free it + * (and "us" along with it) when the refcount becomes 0. */ + scsi_host_put(us_to_host(us)); +} + +/*********************************************************************** + * Initialization and registration + ***********************************************************************/ + +static int __init usb_stor_init(void) +{ + int retval; + printk(KERN_INFO "Initializing USB Mass Storage driver...\n"); + + /* register the driver, return usb_register return code if error */ + retval = usb_register(&usb_storage_driver); + if (retval == 0) + printk(KERN_INFO "USB Mass Storage support registered.\n"); + + return retval; +} + +static void __exit usb_stor_exit(void) +{ + US_DEBUGP("usb_stor_exit() called\n"); + + /* Deregister the driver + * This will cause disconnect() to be called for each + * attached unit + */ + US_DEBUGP("-- calling usb_deregister()\n"); + usb_deregister(&usb_storage_driver) ; + + /* Don't return until all of our control and scanning threads + * have exited. Since each thread signals threads_gone as its + * last act, we have to call wait_for_completion the right number + * of times. + */ + while (atomic_read(&total_threads) > 0) { + wait_for_completion(&threads_gone); + atomic_dec(&total_threads); + } +} + +module_init(usb_stor_init); +module_exit(usb_stor_exit); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h new file mode 100644 index 000000000000..625b7aa98074 --- /dev/null +++ b/drivers/usb/storage/usb.h @@ -0,0 +1,204 @@ +/* Driver for USB Mass Storage compliant devices + * Main Header File + * + * $Id: usb.h,v 1.21 2002/04/21 02:57:59 mdharm Exp $ + * + * Current development and maintenance by: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * + * Initial work by: + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * + * This driver is based on the 'USB Mass Storage Class' document. This + * describes in detail the protocol used to communicate with such + * devices. Clearly, the designers had SCSI and ATAPI commands in + * mind when they created this document. The commands are all very + * similar to commands in the SCSI-II and ATAPI specifications. + * + * It is important to note that in a number of cases this class + * exhibits class-specific exemptions from the USB specification. + * Notably the usage of NAK, STALL and ACK differs from the norm, in + * that they are used to communicate wait, failed and OK on commands. + * + * Also, for certain devices, the interrupt endpoint is used to convey + * status of a command. + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_H_ +#define _USB_H_ + +#include <linux/usb.h> +#include <linux/blkdev.h> +#include <linux/smp_lock.h> +#include <linux/completion.h> +#include <scsi/scsi_host.h> + +struct us_data; +struct scsi_cmnd; + +/* + * Unusual device list definitions + */ + +struct us_unusual_dev { + const char* vendorName; + const char* productName; + __u8 useProtocol; + __u8 useTransport; + int (*initFunction)(struct us_data *); + unsigned int flags; +}; + +/* + * Static flag definitions. We use this roundabout technique so that the + * proc_info() routine can automatically display a message for each flag. + */ +#define US_DO_ALL_FLAGS \ + US_FLAG(SINGLE_LUN, 0x00000001) \ + /* allow access to only LUN 0 */ \ + US_FLAG(NEED_OVERRIDE, 0x00000002) \ + /* unusual_devs entry is necessary */ \ + US_FLAG(SCM_MULT_TARG, 0x00000004) \ + /* supports multiple targets */ \ + US_FLAG(FIX_INQUIRY, 0x00000008) \ + /* INQUIRY response needs faking */ \ + US_FLAG(FIX_CAPACITY, 0x00000010) \ + /* READ CAPACITY response too big */ \ + US_FLAG(IGNORE_RESIDUE, 0x00000020) \ + /* reported residue is wrong */ \ + US_FLAG(BULK32, 0x00000040) \ + /* Uses 32-byte CBW length */ \ + US_FLAG(NOT_LOCKABLE, 0x00000080) \ + /* PREVENT/ALLOW not supported */ \ + US_FLAG(GO_SLOW, 0x00000100) \ + /* Need delay after Command phase */ \ + US_FLAG(NO_WP_DETECT, 0x00000200) \ + /* Don't check for write-protect */ \ + +#define US_FLAG(name, value) US_FL_##name = value , +enum { US_DO_ALL_FLAGS }; +#undef US_FLAG + +/* Dynamic flag definitions: used in set_bit() etc. */ +#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */ +#define US_FLIDX_SG_ACTIVE 19 /* 0x00080000 current_sg is in use */ +#define US_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */ +#define US_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */ +#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \ + (1UL << US_FLIDX_DISCONNECTING)) +#define US_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */ +#define US_FLIDX_TIMED_OUT 23 /* 0x00800000 SCSI midlayer timed out */ + + +#define USB_STOR_STRING_LEN 32 + +/* + * We provide a DMA-mapped I/O buffer for use with small USB transfers. + * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a + * 31-byte buffer. But Freecom needs a 64-byte buffer, so that's the + * size we'll allocate. + */ + +#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ + +typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); +typedef int (*trans_reset)(struct us_data*); +typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); +typedef void (*extra_data_destructor)(void *); /* extra data destructor */ + +/* we allocate one of these for every device that we remember */ +struct us_data { + /* The device we're working with + * It's important to note: + * (o) you must hold dev_semaphore to change pusb_dev + */ + struct semaphore dev_semaphore; /* protect pusb_dev */ + struct usb_device *pusb_dev; /* this usb_device */ + struct usb_interface *pusb_intf; /* this interface */ + struct us_unusual_dev *unusual_dev; /* device-filter entry */ + unsigned long flags; /* from filter initially */ + unsigned int send_bulk_pipe; /* cached pipe values */ + unsigned int recv_bulk_pipe; + unsigned int send_ctrl_pipe; + unsigned int recv_ctrl_pipe; + unsigned int recv_intr_pipe; + + /* information about the device */ + char *transport_name; + char *protocol_name; + __le32 bcs_signature; + u8 subclass; + u8 protocol; + u8 max_lun; + + u8 ifnum; /* interface number */ + u8 ep_bInterval; /* interrupt interval */ + + /* function pointers for this device */ + trans_cmnd transport; /* transport function */ + trans_reset transport_reset; /* transport device reset */ + proto_cmnd proto_handler; /* protocol handler */ + + /* SCSI interfaces */ + struct scsi_cmnd *srb; /* current srb */ + + /* thread information */ + int pid; /* control thread */ + + /* control and bulk communications data */ + struct urb *current_urb; /* USB requests */ + struct usb_ctrlrequest *cr; /* control requests */ + struct usb_sg_request current_sg; /* scatter-gather req. */ + unsigned char *iobuf; /* I/O buffer */ + dma_addr_t cr_dma; /* buffer DMA addresses */ + dma_addr_t iobuf_dma; + + /* mutual exclusion and synchronization structures */ + struct semaphore sema; /* to sleep thread on */ + struct completion notify; /* thread begin/end */ + wait_queue_head_t delay_wait; /* wait during scan, reset */ + + /* subdriver information */ + void *extra; /* Any extra data */ + extra_data_destructor extra_destructor;/* extra data destructor */ +}; + +/* Convert between us_data and the corresponding Scsi_Host */ +static struct Scsi_Host inline *us_to_host(struct us_data *us) { + return container_of((void *) us, struct Scsi_Host, hostdata); +} +static struct us_data inline *host_to_us(struct Scsi_Host *host) { + return (struct us_data *) host->hostdata; +} + +/* Function to fill an inquiry response. See usb.c for details */ +extern void fill_inquiry_response(struct us_data *us, + unsigned char *data, unsigned int data_len); + +/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the + * single queue element srb for write access */ +#define scsi_unlock(host) spin_unlock_irq(host->host_lock) +#define scsi_lock(host) spin_lock_irq(host->host_lock) + + +/* Vendor ID list for devices that require special handling */ +#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */ + +#endif |