summaryrefslogtreecommitdiff
path: root/drivers/usb/storage/shuttle_usbat.c
diff options
context:
space:
mode:
authorDaniel Drake <dsd@gentoo.org>2005-09-30 15:49:36 +0400
committerGreg Kroah-Hartman <gregkh@suse.de>2005-10-29 03:47:43 +0400
commitb7b1e65588b8576c66a429a2623c91504efcf751 (patch)
tree56e1096beea51b60c30f6370ab187d0b8ffe7fa9 /drivers/usb/storage/shuttle_usbat.c
parenta8798533c1f876b97566588cf2bf52458cb4a35d (diff)
downloadlinux-b7b1e65588b8576c66a429a2623c91504efcf751.tar.xz
[PATCH] usb-storage: Some minor shuttle_usbat cleanups
A while ago, Matthew Dharm wrote: > Looks good. Tho, I would like to see a future patch to do two things: > 1) Change comments from C++ style to C-style > 2) Make sure we're naming consistently everywhere SCM, USBAT, > USBAT-02 (most noticably needing fixing is the string used at > transport-selection time, but a sweep of all uses to be consistent > would be in order). Sorry for the long delay, here is a patch to address this. I also clarified some ATA/ATAPI wording + function names. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++++++---------------- drivers/usb/storage/shuttle_usbat.h | 66 +++---- drivers/usb/storage/transport.h | 2 drivers/usb/storage/unusual_devs.h | 10 - drivers/usb/storage/usb.c | 4 5 files changed, 213 insertions(+), 175 deletions(-)
Diffstat (limited to 'drivers/usb/storage/shuttle_usbat.c')
-rw-r--r--drivers/usb/storage/shuttle_usbat.c306
1 files changed, 172 insertions, 134 deletions
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index bd448d6c3185..33c55a6261bb 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,4 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
+/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
*
* $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
*
@@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
/*
- * Convenience function to produce an ATAPI read/write sectors command
+ * Convenience function to produce an ATA read/write sectors command
* Use cmd=0x20 for read, cmd=0x30 for write
*/
-static void usbat_pack_atapi_sector_cmd(unsigned char *buf,
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
unsigned char thistime,
u32 sector, unsigned char cmd)
{
@@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok)
+ /* error/check condition (0x51 is ok) */
+ if (*reply & 0x01 && *reply != 0x51)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x20) // device fault
+ /* device fault */
+ if (*reply & 0x20)
return USB_STOR_TRANSPORT_FAILED;
return USB_STOR_TRANSPORT_GOOD;
@@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us,
command[0] = 0x40;
command[1] = USBAT_CMD_SET_FEAT;
- // The only bit relevant to ATA access is bit 6
- // which defines 8 bit data access (set) or 16 bit (unset)
+ /*
+ * The only bit relevant to ATA access is bit 6
+ * which defines 8 bit data access (set) or 16 bit (unset)
+ */
command[2] = epp_control;
- // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
- // ET1 and ET2 define an external event to be checked for on event of a
- // _read_blocks or _write_blocks operation. The read/write will not take
- // place unless the defined trigger signal is active.
+ /*
+ * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+ * ET1 and ET2 define an external event to be checked for on event of a
+ * _read_blocks or _write_blocks operation. The read/write will not take
+ * place unless the defined trigger signal is active.
+ */
command[3] = external_trigger;
- // The resultant byte of the mask operation (see mask_byte) is compared for
- // equivalence with this test pattern. If equal, the read/write will take
- // place.
+ /*
+ * The resultant byte of the mask operation (see mask_byte) is compared for
+ * equivalence with this test pattern. If equal, the read/write will take
+ * place.
+ */
command[4] = test_pattern;
- // This value is logically ANDed with the status register field specified
- // in the read/write command.
+ /*
+ * This value is logically ANDed with the status register field specified
+ * in the read/write command.
+ */
command[5] = mask_byte;
- // If ALQ is set in the qualifier, this field contains the address of the
- // registers where the byte count should be read for transferring the data.
- // If ALQ is not set, then this field contains the number of bytes to be
- // transferred.
+ /*
+ * If ALQ is set in the qualifier, this field contains the address of the
+ * registers where the byte count should be read for transferring the data.
+ * If ALQ is not set, then this field contains the number of bytes to be
+ * transferred.
+ */
command[6] = subcountL;
command[7] = subcountH;
@@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) { // check condition
+ if (*status & 0x01) { /* check condition */
result = usbat_read(us, USBAT_ATA, 0x10, status);
return USB_STOR_TRANSPORT_FAILED;
}
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
- if ((*status & 0x80)==0x00) { // not busy
+ if ((*status & 0x80)==0x00) { /* not busy */
US_DEBUGP("Waited not busy for %d steps\n", i);
return USB_STOR_TRANSPORT_GOOD;
}
if (i<500)
- msleep(10); // 5 seconds
+ msleep(10); /* 5 seconds */
else if (i<700)
- msleep(50); // 10 seconds
+ msleep(50); /* 10 seconds */
else if (i<1200)
- msleep(100); // 50 seconds
+ msleep(100); /* 50 seconds */
else
- msleep(1000); // X minutes
+ msleep(1000); /* X minutes */
}
US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
@@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (i==0) {
cmdlen = 16;
- // Write to multiple registers
- // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here,
- // but that's what came out of the trace every single time.
+ /*
+ * Write to multiple registers
+ * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+ * necessary here, but that's what came out of the
+ * trace every single time.
+ */
command[0] = 0x40;
command[1] = access | USBAT_CMD_WRITE_REGS;
command[2] = 0x07;
@@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
} else
cmdlen = 8;
- // Conditionally read or write blocks
+ /* Conditionally read or write blocks */
command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
command[cmdlen-7] = access |
(direction==DMA_TO_DEVICE ?
@@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
}
-
- //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
- // direction == DMA_TO_DEVICE ? "out" : "in",
- // len, use_sg);
-
result = usb_stor_bulk_transfer_sg(us,
pipe, content, len, use_sg, NULL);
@@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) // check condition
+ if (*status & 0x01) /* check condition */
return USB_STOR_TRANSPORT_FAILED;
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
US_DEBUGP("Redoing %s\n",
@@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us,
BUG_ON(num_registers > US_IOBUF_SIZE/2);
- // Write to multiple registers, ATA access
+ /* Write to multiple registers, ATA access */
command[0] = 0x40;
command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
- // No relevance
+ /* No relevance */
command[2] = 0;
command[3] = 0;
command[4] = 0;
command[5] = 0;
- // Number of bytes to be transferred (incl. addresses and data)
+ /* Number of bytes to be transferred (incl. addresses and data) */
command[6] = LSB_of(num_registers*2);
command[7] = MSB_of(num_registers*2);
- // The setup command
+ /* The setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Create the reg/data, reg/data sequence
+ /* Create the reg/data, reg/data sequence */
for (i=0; i<num_registers; i++) {
data[i<<1] = registers[i];
data[1+(i<<1)] = data_out[i];
}
- // Send the data
+ /* Send the data */
result = usbat_bulk_write(us, data, num_registers*2);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -606,17 +616,17 @@ static int usbat_read_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms);
+ command[4] = 0xFD; /* Timeout (ms); */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block read setup command
+ /* Multiple block read setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Read the blocks we just asked for
+ /* Read the blocks we just asked for */
result = usbat_bulk_read(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -647,17 +657,17 @@ static int usbat_write_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms)
+ command[4] = 0xFD; /* Timeout (ms) */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block write setup command
+ /* Multiple block write setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Write the data
+ /* Write the data */
result = usbat_bulk_write(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -711,16 +721,20 @@ static int usbat_device_reset(struct us_data *us)
{
int rc;
- // Reset peripheral, enable peripheral control signals
- // (bring reset signal up)
+ /*
+ * Reset peripheral, enable peripheral control signals
+ * (bring reset signal up)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Enable peripheral control signals
- // (bring reset signal down)
+ /*
+ * Enable peripheral control signals
+ * (bring reset signal down)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -737,7 +751,7 @@ static int usbat_device_enable_cdt(struct us_data *us)
{
int rc;
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_write_user_io(us,
USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -786,7 +800,7 @@ static int usbat_flash_check_media(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for media existence
+ /* Check for media existence */
rc = usbat_flash_check_media_present(uio);
if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02;
@@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED;
}
- // Check for media change
+ /* Check for media change */
rc = usbat_flash_check_media_changed(uio);
if (rc == USBAT_FLASH_MEDIA_CHANGED) {
- // Reset and re-enable card detect
+ /* Reset and re-enable card detect */
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -855,13 +869,13 @@ static int usbat_identify_device(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for error bit, or if the command 'fell through'
+ /* Check for error bit, or if the command 'fell through' */
if (status == 0xA1 || !(status & 0x01)) {
- // Device is HP 8200
+ /* Device is HP 8200 */
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
} else {
- // Device is a CompactFlash reader/writer
+ /* Device is a CompactFlash reader/writer */
US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
info->devicetype = USBAT_DEV_FLASH;
}
@@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
- // ATAPI command : IDENTIFY DEVICE
+ /* ATA command : IDENTIFY DEVICE */
rc = usbat_multiple_write(us, registers, command, 3);
if (rc != USB_STOR_XFER_GOOD) {
US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
@@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
goto leave;
}
- // Read device status
+ /* Read device status */
if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
rc = USB_STOR_TRANSPORT_ERROR;
goto leave;
@@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
msleep(100);
- // Read the device identification data
+ /* Read the device identification data */
rc = usbat_read_block(us, reply, 512);
if (rc != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if Jumpshot
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB CF card.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't read more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't read more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // ATAPI command 0x20 (READ SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20);
+ /* ATA command 0x20 (READ SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
- // Write/execute ATAPI read command
+ /* Write/execute ATA read command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Read the data we just requested
+ /* Read the data we just requested */
result = usbat_read_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, TO_XFER_BUF);
@@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if the device
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB media.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't write more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't write more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // Get the data from the transfer buffer
+ /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, FROM_XFER_BUF);
- // ATAPI command 0x30 (WRITE SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30);
+ /* ATA command 0x30 (WRITE SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
- // Write/execute ATAPI write command
+ /* Write/execute ATA write command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Write the data
+ /* Write the data */
result = usbat_write_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
srb->transfersize);
}
- // Since we only read in one block at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
len = (65535/srb->transfersize) * srb->transfersize;
US_DEBUGP("Max read is %d bytes\n", len);
len = min(len, srb->request_bufflen);
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) // bloody hell!
+ if (buffer == NULL) /* bloody hell! */
return USB_STOR_TRANSPORT_FAILED;
sector = short_pack(data[7+3], data[7+2]);
sector <<= 16;
sector |= short_pack(data[7+5], data[7+4]);
transferred = 0;
- sg_segment = 0; // for keeping track of where we are in
- sg_offset = 0; // the scatter/gather list
+ sg_segment = 0; /* for keeping track of where we are in */
+ sg_offset = 0; /* the scatter/gather list */
while (transferred != srb->request_bufflen) {
if (len > srb->request_bufflen - transferred)
len = srb->request_bufflen - transferred;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
- // Fix up the SCSI command sector and num sectors
+ /* Fix up the SCSI command sector and num sectors */
- data[7+2] = MSB_of(sector>>16); // SCSI command sector
+ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
data[7+3] = LSB_of(sector>>16);
data[7+4] = MSB_of(sector&0xFFFF);
data[7+5] = LSB_of(sector&0xFFFF);
if (data[7+0] == GPCMD_READ_CD)
data[7+6] = 0;
- data[7+7] = MSB_of(len / srb->transfersize); // SCSI command
- data[7+8] = LSB_of(len / srb->transfersize); // num sectors
+ data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
registers, data, 19,
@@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
break;
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, srb,
&sg_segment, &sg_offset, TO_XFER_BUF);
- // Update the amount transferred and the sector number
+ /* Update the amount transferred and the sector number */
transferred += len;
sector += len / srb->transfersize;
- } // while transferred != srb->request_bufflen
+ } /* while transferred != srb->request_bufflen */
kfree(buffer);
return result;
@@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us)
int selector;
unsigned char *status = us->iobuf;
- // try device = master, then device = slave.
+ /* try device = master, then device = slave. */
for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
@@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us)
memset(us->extra, 0, sizeof(struct usbat_info));
info = (struct usbat_info *) (us->extra);
- // Enable peripheral control signals
+ /* Enable peripheral control signals */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 5\n");
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 9\n");
- // At this point, we need to detect which device we are using
+ /* At this point, we need to detect which device we are using */
if (usbat_set_transport(us, info))
return USB_STOR_TRANSPORT_ERROR;
@@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
data[0] = 0x00;
data[1] = 0x00;
data[2] = 0x00;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
- data[5] = 0xB0; // (device sel) = slave
- data[6] = 0xA0; // (command) = ATA PACKET COMMAND
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+ data[5] = 0xB0; /* (device sel) = slave */
+ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
for (i=7; i<19; i++) {
registers[i] = 0x10;
@@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result;
}
- // Write the 12-byte command header.
-
- // If the command is BLANK then set the timer for 75 minutes.
- // Otherwise set it for 10 minutes.
-
- // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
- // AT SPEED 4 IS UNRELIABLE!!!
+ /*
+ * Write the 12-byte command header.
+ *
+ * If the command is BLANK then set the timer for 75 minutes.
+ * Otherwise set it for 10 minutes.
+ *
+ * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+ * AT SPEED 4 IS UNRELIABLE!!!
+ */
if ( (result = usbat_write_block(us,
USBAT_ATA, srb->cmnd, 12,
@@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result;
}
- // If there is response data to be read in
- // then do it here.
+ /* If there is response data to be read in then do it here. */
if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
- // How many bytes to read in? Check cylL register
+ /* How many bytes to read in? Check cylL register */
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
USB_STOR_XFER_GOOD) {
return USB_STOR_TRANSPORT_ERROR;
}
- if (len > 0xFF) { // need to read cylH also
+ if (len > 0xFF) { /* need to read cylH also */
len = *status;
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
USB_STOR_XFER_GOOD) {
@@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
+ /* hard coded 512 byte sectors as per ATA spec */
+ info->ssize = 0x200;
US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
info->sectors, info->ssize);
- // build the reply
- // note: must return the sector number of the last sector,
- // *not* the total number of sectors
+ /*
+ * build the reply
+ * note: must return the sector number of the last sector,
+ * *not* the total number of sectors
+ */
((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
usb_stor_set_xfer_buf(ptr, 8, srb);
@@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == READ_12) {
- // I don't think we'll ever see a READ_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a READ_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == WRITE_12) {
- // I don't think we'll ever see a WRITE_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a WRITE_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- // sure. whatever. not like we can stop the user from popping
- // the media out of the device (no locking doors, etc)
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}