Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

1 files changed, 10 insertions, 11 deletions

diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index eae2c873b39f..e40ab739c4a6 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -13,7 +13,6 @@
  * show the commands used to talk to the device, but I am not sure.
  */
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -53,7 +52,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
-	/* send  2st cmd and recieve data */
+	/* send 2st cmd and receive data */
 	/*
 	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS              25.1.0(5)
 	 * 16.0  DI     00 96 00 00  00 00 08
@@ -65,7 +64,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 3 cmd */
+	/* send 3rd cmd */
 	/*
 	 * 16.0 CTL    21 20 00 00  00 00 07 00    CLASS                30.1.0
 	 * 16.0 DO     80 25 00 00  00 00 08       .%.....              30.2.0
@@ -84,7 +83,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 4 cmd */
+	/* send 4th cmd */
 	/*
 	 * 16.0 CTL    21 22 03 00  00 00 00 00
 	 */
@@ -95,7 +94,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
-	/* send 5 cmd */
+	/* send 5th cmd */
 	/*
 	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS               33.1.0
 	 * 16.0  DI     80 25 00 00  00 00 08
@@ -107,7 +106,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 6 cmd */
+	/* send 6th cmd */
 	/*
 	 * 16.0  CTL    21 20 00 00  00 00 07 00    CLASS               34.1.0
 	 * 16.0  DO     80 25 00 00  00 00 08
@@ -195,7 +194,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 4 cmd */
+	/* send 4th cmd */
 	/*
 	 * 16.0 CTL    21 20 00 00  00 00 07 00      CLASS            30.1.0
 	 * 16.0  DO    00 c2 01 00  00 00 08         .%.....          30.2.0
@@ -214,7 +213,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 5 cmd */
+	/* send 5th cmd */
 	/*
 	 * 16.0 CTL    21 22 03 00  00 00 00 00
 	 */
@@ -225,7 +224,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
-	/* send 6 cmd */
+	/* send 6th cmd */
 	/*
 	 * 16.0  CTL    a1 21 00 00  00 00 07 00        CLASS          33.1.0
 	 * 16.0  DI     00 c2 01 00  00 00 08
@@ -237,7 +236,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 7 cmd */
+	/* send 7th cmd */
 	/*
 	 * 16.0  CTL    21 20 00 00  00 00 07 00  CLASS               354.1.0
 	 * 16.0  DO     00 c2 01 00  00 00 08     .......             354.2.0
@@ -256,7 +255,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
-	/* send 8 cmd */
+	/* send 8th cmd */
 	/*
 	 * 16.0 CTL    21 22 03 00  00 00 00 00
 	 */