Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

1 files changed, 18 insertions, 15 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index fb0d537435eb..ce0d7b0db012 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,7 +33,6 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
@@ -145,7 +144,7 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
  * Device ID not listed? Test it using
  * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
  */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
@@ -1695,11 +1694,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-					sizeof(struct ftdi_private));
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	mutex_init(&priv->cfg_lock);
 
@@ -2124,10 +2120,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/*
-	 * All FTDI UART chips are limited to CS7/8. We won't pretend to
+	 * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
 	 * support CS5/6 and revert the CSIZE setting instead.
+	 *
+	 * CS5 however is used to control some smartcard readers which abuse
+	 * this limitation to switch modes. Original FTDI chips fall back to
+	 * eight data bits.
+	 *
+	 * TODO: Implement a quirk to only allow this with mentioned
+	 *       readers. One I know of (Argolis Smartreader V1)
+	 *       returns "USB smartcard server" as iInterface string.
+	 *       The vendor didn't bother with a custom VID/PID of
+	 *       course.
 	 */
-	if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+	if (C_CSIZE(tty) == CS6) {
 		dev_warn(ddev, "requested CSIZE setting not supported\n");
 
 		termios->c_cflag &= ~CSIZE;
@@ -2174,6 +2180,9 @@ no_skip:
 		urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
 	}
 	switch (cflag & CSIZE) {
+	case CS5:
+		dev_dbg(ddev, "Setting CS5 quirk\n");
+		break;
 	case CS7:
 		urb_value |= 7;
 		dev_dbg(ddev, "Setting CS7\n");
@@ -2383,8 +2392,6 @@ static int ftdi_ioctl(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 
-	dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
-
 	/* Based on code from acm.c and others */
 	switch (cmd) {
 
@@ -2401,11 +2408,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	default:
 		break;
 	}
-	/* This is not necessarily an error - turns out the higher layers
-	 * will do some ioctls themselves (see comment above)
-	 */
-	dev_dbg(&port->dev, "%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h\n",
-		__func__, cmd);
+
 	return -ENOIOCTLCMD;
 }