usb: musb: pass configuration specifics via pdata

Use platform_data to pass musb configuration-specific
details to musb driver.

This patch will prevent that other platforms selecting
HAVE_CLK and enabling musb won't break tree building.

The other parts of it will come when linux-omap merge
up more omap2/3 board-files.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 169 deletions

diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index db6dad0750ae..ab8c96286ce6 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -230,173 +230,4 @@ extern u8 tusb_get_revision(struct musb *musb);
 #define TUSB_REV_30	0x30
 #define TUSB_REV_31	0x31
 
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_TUSB6010
-
-/* configuration parameters specific to this silicon */
-
-/* Number of Tx endpoints. Legal values are 1 - 16 (this value includes EP0) */
-#define MUSB_C_NUM_EPT 16
-
-/* Number of Rx endpoints. Legal values are 1 - 16 (this value includes EP0) */
-#define MUSB_C_NUM_EPR 16
-
-/* Endpoint 1 to 15 direction types. C_EP1_DEF is defined if either Tx endpoint
- * 1 or Rx endpoint 1 are used.
- */
-#define MUSB_C_EP1_DEF
-
-/* C_EP1_TX_DEF is defined if Tx endpoint 1 is used */
-#define MUSB_C_EP1_TX_DEF
-
-/* C_EP1_RX_DEF is defined if Rx endpoint 1 is used */
-#define MUSB_C_EP1_RX_DEF
-
-/* C_EP1_TOR_DEF is defined if Tx endpoint 1 and Rx endpoint 1 share a FIFO */
-/* #define C_EP1_TOR_DEF */
-
-/* C_EP1_TAR_DEF is defined if both Tx endpoint 1 and Rx endpoint 1 are used
- * and do not share a FIFO.
- */
-#define MUSB_C_EP1_TAR_DEF
-
-/* Similarly for all other used endpoints */
-#define MUSB_C_EP2_DEF
-#define MUSB_C_EP2_TX_DEF
-#define MUSB_C_EP2_RX_DEF
-#define MUSB_C_EP2_TAR_DEF
-#define MUSB_C_EP3_DEF
-#define MUSB_C_EP3_TX_DEF
-#define MUSB_C_EP3_RX_DEF
-#define MUSB_C_EP3_TAR_DEF
-#define MUSB_C_EP4_DEF
-#define MUSB_C_EP4_TX_DEF
-#define MUSB_C_EP4_RX_DEF
-#define MUSB_C_EP4_TAR_DEF
-
-/* Endpoint 1 to 15 FIFO address bits. Legal values are 3 to 13 - corresponding
- * to FIFO sizes of 8 to 8192 bytes. If an Tx endpoint shares a FIFO with an Rx
- * endpoint then the Rx FIFO size must be the same as the Tx FIFO size. All
- * endpoints 1 to 15 must be defined, unused endpoints should be set to 2.
- */
-#define MUSB_C_EP1T_BITS 5
-#define MUSB_C_EP1R_BITS 5
-#define MUSB_C_EP2T_BITS 5
-#define MUSB_C_EP2R_BITS 5
-#define MUSB_C_EP3T_BITS 3
-#define MUSB_C_EP3R_BITS 3
-#define MUSB_C_EP4T_BITS 3
-#define MUSB_C_EP4R_BITS 3
-
-#define MUSB_C_EP5T_BITS 2
-#define MUSB_C_EP5R_BITS 2
-#define MUSB_C_EP6T_BITS 2
-#define MUSB_C_EP6R_BITS 2
-#define MUSB_C_EP7T_BITS 2
-#define MUSB_C_EP7R_BITS 2
-#define MUSB_C_EP8T_BITS 2
-#define MUSB_C_EP8R_BITS 2
-#define MUSB_C_EP9T_BITS 2
-#define MUSB_C_EP9R_BITS 2
-#define MUSB_C_EP10T_BITS 2
-#define MUSB_C_EP10R_BITS 2
-#define MUSB_C_EP11T_BITS 2
-#define MUSB_C_EP11R_BITS 2
-#define MUSB_C_EP12T_BITS 2
-#define MUSB_C_EP12R_BITS 2
-#define MUSB_C_EP13T_BITS 2
-#define MUSB_C_EP13R_BITS 2
-#define MUSB_C_EP14T_BITS 2
-#define MUSB_C_EP14R_BITS 2
-#define MUSB_C_EP15T_BITS 2
-#define MUSB_C_EP15R_BITS 2
-
-/* Define the following constant if the USB2.0 Transceiver Macrocell data width
- * is 16-bits.
- */
-/* #define C_UTM_16 */
-
-/* Define this constant if the CPU uses big-endian byte ordering. */
-/* #define C_BIGEND */
-
-/* Define the following constant if any Tx endpoint is required to support
- * multiple bulk packets.
- */
-/* #define C_MP_TX */
-
-/* Define the following constant if any Rx endpoint is required to support
- * multiple bulk packets.
- */
-/* #define C_MP_RX */
-
-/* Define the following constant if any Tx endpoint is required to support high
- * bandwidth ISO.
- */
-/* #define C_HB_TX */
-
-/* Define the following constant if any Rx endpoint is required to support high
- * bandwidth ISO.
- */
-/* #define C_HB_RX */
-
-/* Define the following constant if software connect/disconnect control is
- * required.
- */
-#define MUSB_C_SOFT_CON
-
-/* Define the following constant if Vendor Control Registers are required. */
-/* #define C_VEND_REG */
-
-/* Vendor control register widths. */
-#define MUSB_C_VCTL_BITS 4
-#define MUSB_C_VSTAT_BITS 8
-
-/* Define the following constant to include a DMA controller. */
-/* #define C_DMA */
-
-/* Define the following constant if 2 or more DMA channels are required. */
-/* #define C_DMA2 */
-
-/* Define the following constant if 3 or more DMA channels are required. */
-/* #define C_DMA3 */
-
-/* Define the following constant if 4 or more DMA channels are required. */
-/* #define C_DMA4 */
-
-/* Define the following constant if 5 or more DMA channels are required. */
-/* #define C_DMA5 */
-
-/* Define the following constant if 6 or more DMA channels are required. */
-/* #define C_DMA6 */
-
-/* Define the following constant if 7 or more DMA channels are required. */
-/* #define C_DMA7 */
-
-/* Define the following constant if 8 or more DMA channels are required. */
-/* #define C_DMA8 */
-
-/* Enable Dynamic FIFO Sizing */
-#define MUSB_C_DYNFIFO_DEF
-
-/* Derived constants. The following constants are derived from the previous
- * configuration constants
- */
-
-/* Total number of endpoints. Legal values are 2 - 16. This must be equal to
- * the larger of C_NUM_EPT, C_NUM_EPR
- */
-/* #define MUSB_C_NUM_EPS 5 */
-
-/* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */
-#define MUSB_C_EPMAX_BITS 11
-
-/* C_RAM_BITS is the number of address bits required to address the RAM (32-bit
- * addresses).  It is defined as log2 of the sum of 2** of all the endpoint FIFO
- * dword address bits (rounded up).
- */
-#define MUSB_C_RAM_BITS 12
-
-#endif /* CONFIG_USB_TUSB6010 */
-
 #endif /* __TUSB6010_H__ */