diff options
| author | Heikki Krogerus <heikki.krogerus@linux.intel.com> | 2012-02-13 15:24:15 +0400 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2012-02-13 15:52:54 +0400 |
| commit | d445b6da8da491e025eb60576ce959f6a3a56a4f (patch) | |
| tree | 06bf3afc86c3c6248a9c2d980cf359bdb008447e /drivers/usb/musb/tusb6010.c | |
| parent | 76eb57ec1bf3201d2f417cafa5c974e7c0b6aaf9 (diff) | |
| download | linux-d445b6da8da491e025eb60576ce959f6a3a56a4f.tar.xz | |
usb: musb: Start using struct usb_otg
Use struct usb_otg members with OTG specific functions instead
of usb_phy members.
[ balbi@ti.com: added a missing change on musb_gadget.c to avoid
a compile error on a later patch ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb/tusb6010.c')
| -rw-r--r-- | drivers/usb/musb/tusb6010.c | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 5ce01bdb1951..0665c14cc540 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -293,7 +293,7 @@ static int tusb_draw_power(struct usb_phy *x, unsigned mA) * The actual current usage would be very board-specific. For now, * it's simpler to just use an aggregate (also board-specific). */ - if (x->default_a || mA < (musb->min_power << 1)) + if (x->otg->default_a || mA < (musb->min_power << 1)) mA = 0; reg = musb_readl(tbase, TUSB_PRCM_MNGMT); @@ -510,6 +510,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) void __iomem *tbase = musb->ctrl_base; u32 conf, prcm, timer; u8 devctl; + struct usb_otg *otg = musb->xceiv->otg; /* HDRC controls CPEN, but beware current surges during device * connect. They can trigger transient overcurrent conditions @@ -522,7 +523,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) if (is_on) { timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE); - musb->xceiv->default_a = 1; + otg->default_a = 1; musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; @@ -548,11 +549,11 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) musb->xceiv->state = OTG_STATE_A_IDLE; } musb->is_active = 0; - musb->xceiv->default_a = 1; + otg->default_a = 1; MUSB_HST_MODE(musb); } else { musb->is_active = 0; - musb->xceiv->default_a = 0; + otg->default_a = 0; musb->xceiv->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); } @@ -644,6 +645,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) { u32 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); unsigned long idle_timeout = 0; + struct usb_otg *otg = musb->xceiv->otg; /* ID pin */ if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) { @@ -654,7 +656,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) else default_a = is_host_enabled(musb); dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B'); - musb->xceiv->default_a = default_a; + otg->default_a = default_a; tusb_musb_set_vbus(musb, default_a); /* Don't allow idling immediately */ @@ -666,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { /* B-dev state machine: no vbus ~= disconnect */ - if ((is_otg_enabled(musb) && !musb->xceiv->default_a) + if ((is_otg_enabled(musb) && !otg->default_a) || !is_host_enabled(musb)) { /* ? musb_root_disconnect(musb); */ musb->port1_status &= |