diff options
| author | Chunfeng Yun <chunfeng.yun@mediatek.com> | 2017-07-25 11:10:22 +0300 |
|---|---|---|
| committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2017-08-15 12:46:02 +0300 |
| commit | 8ba4ad488eebeae4d5f1b03524062aa0d70b3fdb (patch) | |
| tree | 710e2a2bb602259e834ba9d614e703e74a73c375 /drivers/usb/mtu3/mtu3_gadget_ep0.c | |
| parent | c7733dc117fe0a8b0095cc3c3b4c22c67a4b5155 (diff) | |
| download | linux-8ba4ad488eebeae4d5f1b03524062aa0d70b3fdb.tar.xz | |
usb: mtu3: handle delayed status of the control transfer
Add the delayed status handling. This is used by mass storage etc to
gain some extra time to setup its internal status before it can proceed
further requests, and once the gadget is ready, it will enqueue an
empty packet which is used for synchronization.
The issue may happen on some FGPA platform with very low cpu frequency.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb/mtu3/mtu3_gadget_ep0.c')
| -rw-r--r-- | drivers/usb/mtu3/mtu3_gadget_ep0.c | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 2d7427b48775..958d74dd2b78 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -16,6 +16,8 @@ * */ +#include <linux/usb/composite.h> + #include "mtu3.h" /* ep0 is always mtu3->in_eps[0] */ @@ -150,6 +152,7 @@ static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy) csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL; mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); + mtu->delayed_status = false; mtu->ep0_state = MU3D_EP0_STATE_SETUP; dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n", @@ -656,6 +659,9 @@ stall: finish: if (mtu->test_mode) { ; /* nothing to do */ + } else if (handled == USB_GADGET_DELAYED_STATUS) { + /* handle the delay STATUS phase till receive ep_queue on ep0 */ + mtu->delayed_status = true; } else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */ mtu3_writel(mbase, U3D_EP0CSR, @@ -775,9 +781,6 @@ static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq) dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__, mep->name, decode_ep0_state(mtu), mreq->request.length); - if (!list_empty(&mep->req_list)) - return -EBUSY; - switch (mtu->ep0_state) { case MU3D_EP0_STATE_SETUP: case MU3D_EP0_STATE_RX: /* control-OUT data */ @@ -789,6 +792,20 @@ static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq) return -EINVAL; } + if (mtu->delayed_status) { + u32 csr; + + mtu->delayed_status = false; + csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS; + csr |= EP0_SETUPPKTRDY | EP0_DATAEND; + mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); + /* needn't giveback the request for handling delay STATUS */ + return 0; + } + + if (!list_empty(&mep->req_list)) + return -EBUSY; + list_add_tail(&mreq->list, &mep->req_list); /* sequence #1, IN ... start writing the data */ |