Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...

1 files changed, 325 insertions, 0 deletions

diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
new file mode 100644
index 000000000000..f713f6aeb6e5
--- /dev/null
+++ b/drivers/usb/misc/usb3503.c
@@ -0,0 +1,325 @@
+/*
+ * Driver for SMSC USB3503 USB 2.0 hub controller driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb3503.h>
+
+#define USB3503_VIDL		0x00
+#define USB3503_VIDM		0x01
+#define USB3503_PIDL		0x02
+#define USB3503_PIDM		0x03
+#define USB3503_DIDL		0x04
+#define USB3503_DIDM		0x05
+
+#define USB3503_CFG1		0x06
+#define USB3503_SELF_BUS_PWR	(1 << 7)
+
+#define USB3503_CFG2		0x07
+#define USB3503_CFG3		0x08
+#define USB3503_NRD		0x09
+
+#define USB3503_PDS		0x0a
+#define USB3503_PORT1		(1 << 1)
+#define USB3503_PORT2		(1 << 2)
+#define USB3503_PORT3		(1 << 3)
+
+#define USB3503_SP_ILOCK	0xe7
+#define USB3503_SPILOCK_CONNECT	(1 << 1)
+#define USB3503_SPILOCK_CONFIG	(1 << 0)
+
+#define USB3503_CFGP		0xee
+#define USB3503_CLKSUSP		(1 << 7)
+
+struct usb3503 {
+	enum usb3503_mode	mode;
+	struct i2c_client	*client;
+	int	gpio_intn;
+	int	gpio_reset;
+	int	gpio_connect;
+};
+
+static int usb3503_write_register(struct i2c_client *client,
+		char reg, char data)
+{
+	return i2c_smbus_write_byte_data(client, reg, data);
+}
+
+static int usb3503_read_register(struct i2c_client *client, char reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
+{
+	int err;
+
+	err = usb3503_read_register(client, reg);
+	if (err < 0)
+		return err;
+
+	err = usb3503_write_register(client, reg, err | req);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
+{
+	int err;
+
+	err = usb3503_read_register(client, reg);
+	if (err < 0)
+		return err;
+
+	err = usb3503_write_register(client, reg, err & ~req);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int usb3503_reset(int gpio_reset, int state)
+{
+	if (gpio_is_valid(gpio_reset))
+		gpio_set_value(gpio_reset, state);
+
+	/* Wait RefClk when RESET_N is released, otherwise Hub will
+	 * not transition to Hub Communication Stage.
+	 */
+	if (state)
+		msleep(100);
+
+	return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+	struct i2c_client *i2c = hub->client;
+	int err = 0;
+
+	switch (mode) {
+	case USB3503_MODE_HUB:
+		usb3503_reset(hub->gpio_reset, 1);
+
+		/* SP_ILOCK: set connect_n, config_n for config */
+		err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
+				(USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* PDS : Port2,3 Disable For Self Powered Operation */
+		err = usb3503_set_bits(i2c, USB3503_PDS,
+				(USB3503_PORT2 | USB3503_PORT3));
+		if (err < 0) {
+			dev_err(&i2c->dev, "PDS failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
+		err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
+		if (err < 0) {
+			dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* SP_LOCK: clear connect_n, config_n for hub connect */
+		err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
+				(USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		hub->mode = mode;
+		dev_info(&i2c->dev, "switched to HUB mode\n");
+		break;
+
+	case USB3503_MODE_STANDBY:
+		usb3503_reset(hub->gpio_reset, 0);
+
+		hub->mode = mode;
+		dev_info(&i2c->dev, "switched to STANDBY mode\n");
+		break;
+
+	default:
+		dev_err(&i2c->dev, "unknown mode is request\n");
+		err = -EINVAL;
+		break;
+	}
+
+err_hubmode:
+	return err;
+}
+
+static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct usb3503_platform_data *pdata = i2c->dev.platform_data;
+	struct device_node *np = i2c->dev.of_node;
+	struct usb3503 *hub;
+	int err = -ENOMEM;
+	u32 mode = USB3503_MODE_UNKNOWN;
+
+	hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub) {
+		dev_err(&i2c->dev, "private data alloc fail\n");
+		return err;
+	}
+
+	i2c_set_clientdata(i2c, hub);
+	hub->client = i2c;
+
+	if (pdata) {
+		hub->gpio_intn		= pdata->gpio_intn;
+		hub->gpio_connect	= pdata->gpio_connect;
+		hub->gpio_reset		= pdata->gpio_reset;
+		hub->mode		= pdata->initial_mode;
+	} else if (np) {
+		hub->gpio_intn	= of_get_named_gpio(np, "connect-gpios", 0);
+		if (hub->gpio_intn == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0);
+		if (hub->gpio_connect == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		hub->gpio_reset	= of_get_named_gpio(np, "reset-gpios", 0);
+		if (hub->gpio_reset == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		of_property_read_u32(np, "initial-mode", &mode);
+		hub->mode = mode;
+	}
+
+	if (gpio_is_valid(hub->gpio_intn)) {
+		err = gpio_request_one(hub->gpio_intn,
+				GPIOF_OUT_INIT_HIGH, "usb3503 intn");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as connect pin (%d)\n",
+					hub->gpio_intn, err);
+			goto err_out;
+		}
+	}
+
+	if (gpio_is_valid(hub->gpio_connect)) {
+		err = gpio_request_one(hub->gpio_connect,
+				GPIOF_OUT_INIT_HIGH, "usb3503 connect");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as connect pin (%d)\n",
+					hub->gpio_connect, err);
+			goto err_gpio_connect;
+		}
+	}
+
+	if (gpio_is_valid(hub->gpio_reset)) {
+		err = gpio_request_one(hub->gpio_reset,
+				GPIOF_OUT_INIT_LOW, "usb3503 reset");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as reset pin (%d)\n",
+					hub->gpio_reset, err);
+			goto err_gpio_reset;
+		}
+	}
+
+	usb3503_switch_mode(hub, hub->mode);
+
+	dev_info(&i2c->dev, "%s: probed on  %s mode\n", __func__,
+			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
+
+	return 0;
+
+err_gpio_reset:
+	if (gpio_is_valid(hub->gpio_connect))
+		gpio_free(hub->gpio_connect);
+err_gpio_connect:
+	if (gpio_is_valid(hub->gpio_intn))
+		gpio_free(hub->gpio_intn);
+err_out:
+	kfree(hub);
+
+	return err;
+}
+
+static int usb3503_remove(struct i2c_client *i2c)
+{
+	struct usb3503 *hub = i2c_get_clientdata(i2c);
+
+	if (gpio_is_valid(hub->gpio_intn))
+		gpio_free(hub->gpio_intn);
+	if (gpio_is_valid(hub->gpio_connect))
+		gpio_free(hub->gpio_connect);
+	if (gpio_is_valid(hub->gpio_reset))
+		gpio_free(hub->gpio_reset);
+
+	kfree(hub);
+
+	return 0;
+}
+
+static const struct i2c_device_id usb3503_id[] = {
+	{ USB3503_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, usb3503_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb3503_of_match[] = {
+	{ .compatible = "smsc,usb3503", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, usb3503_of_match);
+#endif
+
+static struct i2c_driver usb3503_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+		.of_match_table = of_match_ptr(usb3503_of_match),
+	},
+	.probe		= usb3503_probe,
+	.remove		= usb3503_remove,
+	.id_table	= usb3503_id,
+};
+
+static int __init usb3503_init(void)
+{
+	return i2c_add_driver(&usb3503_driver);
+}
+
+static void __exit usb3503_exit(void)
+{
+	i2c_del_driver(&usb3503_driver);
+}
+
+module_init(usb3503_init);
+module_exit(usb3503_exit);
+
+MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
+MODULE_DESCRIPTION("USB3503 USB HUB driver");
+MODULE_LICENSE("GPL");