Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 557b6f32db86..673ad120c43e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 	xhci_writel(xhci, temp, port_array[port_id]);
 }
 
+void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+		__le32 __iomem **port_array, int port_id, u16 wake_mask)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+		temp |= PORT_WKCONN_E;
+	else
+		temp &= ~PORT_WKCONN_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+		temp |= PORT_WKDISC_E;
+	else
+		temp &= ~PORT_WKDISC_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+		temp |= PORT_WKOC_E;
+	else
+		temp &= ~PORT_WKOC_E;
+
+	xhci_writel(xhci, temp, port_array[port_id]);
+}
+
 /* Test and clear port RWC bit */
 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 port_bit)
@@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
+	u16 wake_mask = 0;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	case SetPortFeature:
 		if (wValue == USB_PORT_FEAT_LINK_STATE)
 			link_state = (wIndex & 0xff00) >> 3;
+		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+			wake_mask = wIndex & 0xff00;
 		wIndex &= 0xff;
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
+		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+			xhci_set_remote_wake_mask(xhci, port_array,
+					wIndex, wake_mask);
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			xhci_dbg(xhci, "set port remote wake mask, "
+					"actual port %d status  = 0x%x\n",
+					wIndex, temp);
+			break;
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			temp |= PORT_WR;
 			xhci_writel(xhci, temp, port_array[wIndex]);
@@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
 		}
+		/* USB core sets remote wake mask for USB 3.0 hubs,
+		 * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
+		 * is enabled, so also enable remote wake here.
+		 */
 		if (hcd->self.root_hub->do_remote_wakeup) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;