diff options
| author | Suresh Gupta <B42813@freescale.com> | 2019-06-24 10:22:16 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-07-03 19:52:20 +0300 |
| commit | 5dfff995f9cb21c2910e40f5d4da53473356a792 (patch) | |
| tree | 92c692395379b592d35230299c103a375d211284 /drivers/usb/host/ehci-fsl.c | |
| parent | 4f182835508c2d3dc6f5cc0e56b65b4c1ca325f8 (diff) | |
| download | linux-5dfff995f9cb21c2910e40f5d4da53473356a792.tar.xz | |
usb: phy: Workaround for USB erratum-A005728
PHY_CLK_VALID bit for UTMI PHY in USBDR does not set even
if PHY is providing valid clock. Workaround for this
involves resetting of PHY and check PHY_CLK_VALID bit
multiple times. If PHY_CLK_VALID bit is still not set even
after 5 retries, it would be safe to deaclare that PHY
clock is not available.
This erratum is applicable for USBDR less then ver 2.4.
Signed-off-by: Suresh Gupta <B42813@freescale.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Link: https://lore.kernel.org/r/20190624072219.15258-2-yinbo.zhu@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 37 |
1 files changed, 26 insertions, 11 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 38674b7aa51e..8f3bf3efb038 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -183,6 +183,17 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) return retval; } +static bool usb_phy_clk_valid(struct usb_hcd *hcd) +{ + void __iomem *non_ehci = hcd->regs; + bool ret = true; + + if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID)) + ret = false; + + return ret; +} + static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) @@ -226,6 +237,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, /* fall through */ case FSL_USB2_PHY_UTMI: case FSL_USB2_PHY_UTMI_DUAL: + /* PHY_CLK_VALID bit is de-featured from all controller + * versions below 2.4 and is to be checked only for + * internal UTMI phy + */ + if (pdata->controller_ver > FSL_USB_VER_2_4 && + pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) { + dev_err(dev, "USB PHY clock invalid\n"); + return -EINVAL; + } + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); @@ -249,17 +270,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - /* - * check PHY_CLK_VALID to determine phy clock presence before writing - * to portsc - */ - if (pdata->check_phy_clk_valid) { - if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & - PHY_CLK_VALID)) { - dev_warn(hcd->self.controller, - "USB PHY clock invalid\n"); - return -EINVAL; - } + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && + !usb_phy_clk_valid(hcd)) { + dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); + return -EINVAL; } ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); |