summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2
diff options
context:
space:
mode:
authorJohn Youn <johnyoun@synopsys.com>2016-02-24 06:55:00 +0300
committerFelipe Balbi <balbi@kernel.org>2016-03-04 16:14:46 +0300
commitb02038faa7f1b228983d05633c8345f826b20042 (patch)
treedec7103c71c8aafb22571d43eaf48553aae56e18 /drivers/usb/dwc2
parent58e52ff6a6c3ce964c71b2dd9f06be426f993524 (diff)
downloadlinux-b02038faa7f1b228983d05633c8345f826b20042.tar.xz
usb: dwc2: Move host-specific core functions into hcd.c
Move host core initialization and host channel routines into hcd.c. This allows these functions to only be compiled in host-enabled driver configurations (DRD or host-only). Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
Diffstat (limited to 'drivers/usb/dwc2')
-rw-r--r--drivers/usb/dwc2/core.c1776
-rw-r--r--drivers/usb/dwc2/core.h24
-rw-r--r--drivers/usb/dwc2/hcd.c1799
-rw-r--r--drivers/usb/dwc2/hcd.h8
4 files changed, 1806 insertions, 1801 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index d5091b91ba49..4135a5ff67ca 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -238,62 +238,6 @@ int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg)
return ret;
}
-/**
- * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
- * used in both device and host modes
- *
- * @hsotg: Programming view of the DWC_otg controller
- */
-static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk;
-
- /* Clear any pending OTG Interrupts */
- dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
-
- /* Clear any pending interrupts */
- dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
-
- /* Enable the interrupts in the GINTMSK */
- intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
-
- if (hsotg->core_params->dma_enable <= 0)
- intmsk |= GINTSTS_RXFLVL;
- if (hsotg->core_params->external_id_pin_ctl <= 0)
- intmsk |= GINTSTS_CONIDSTSCHNG;
-
- intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
- GINTSTS_SESSREQINT;
-
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/*
- * Initializes the FSLSPClkSel field of the HCFG register depending on the
- * PHY type
- */
-static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
-{
- u32 hcfg, val;
-
- if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- hsotg->core_params->ulpi_fs_ls > 0) ||
- hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
- /* Full speed PHY */
- val = HCFG_FSLSPCLKSEL_48_MHZ;
- } else {
- /* High speed PHY running at full speed or high speed */
- val = HCFG_FSLSPCLKSEL_30_60_MHZ;
- }
-
- dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
- hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
-}
-
/*
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
@@ -463,1726 +407,6 @@ int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
return 0;
}
-static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg, i2cctl;
- int retval = 0;
-
- /*
- * core_init() is now called on every switch so only call the
- * following for the first time through
- */
- if (select_phy) {
- dev_dbg(hsotg->dev, "FS PHY selected\n");
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- if (!(usbcfg & GUSBCFG_PHYSEL)) {
- usbcfg |= GUSBCFG_PHYSEL;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after a PHY select */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
-
- if (retval) {
- dev_err(hsotg->dev,
- "%s: Reset failed, aborting", __func__);
- return retval;
- }
- }
- }
-
- /*
- * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
- * do this on HNP Dev/Host mode switches (done in dev_init and
- * host_init).
- */
- if (dwc2_is_host_mode(hsotg))
- dwc2_init_fs_ls_pclk_sel(hsotg);
-
- if (hsotg->core_params->i2c_enable > 0) {
- dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
-
- /* Program GUSBCFG.OtgUtmiFsSel to I2C */
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Program GI2CCTL.I2CEn */
- i2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
- i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
- i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
- i2cctl &= ~GI2CCTL_I2CEN;
- dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- i2cctl |= GI2CCTL_I2CEN;
- dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
- }
-
- return retval;
-}
-
-static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg, usbcfg_old;
- int retval = 0;
-
- if (!select_phy)
- return 0;
-
- usbcfg = usbcfg_old = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /*
- * HS PHY parameters. These parameters are preserved during soft reset
- * so only program the first time. Do a soft reset immediately after
- * setting phyif.
- */
- switch (hsotg->core_params->phy_type) {
- case DWC2_PHY_TYPE_PARAM_ULPI:
- /* ULPI interface */
- dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
- usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
- usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
- if (hsotg->core_params->phy_ulpi_ddr > 0)
- usbcfg |= GUSBCFG_DDRSEL;
- break;
- case DWC2_PHY_TYPE_PARAM_UTMI:
- /* UTMI+ interface */
- dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
- usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
- if (hsotg->core_params->phy_utmi_width == 16)
- usbcfg |= GUSBCFG_PHYIF16;
- break;
- default:
- dev_err(hsotg->dev, "FS PHY selected at HS!\n");
- break;
- }
-
- if (usbcfg != usbcfg_old) {
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /* Reset after setting the PHY parameters */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
- if (retval) {
- dev_err(hsotg->dev,
- "%s: Reset failed, aborting", __func__);
- return retval;
- }
- }
-
- return retval;
-}
-
-static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
-{
- u32 usbcfg;
- int retval = 0;
-
- if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL &&
- hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
- /* If FS mode with FS PHY */
- retval = dwc2_fs_phy_init(hsotg, select_phy);
- if (retval)
- return retval;
- } else {
- /* High speed PHY */
- retval = dwc2_hs_phy_init(hsotg, select_phy);
- if (retval)
- return retval;
- }
-
- if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
- hsotg->core_params->ulpi_fs_ls > 0) {
- dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg |= GUSBCFG_ULPI_FS_LS;
- usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- } else {
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~GUSBCFG_ULPI_FS_LS;
- usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
- }
-
- return retval;
-}
-
-static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
-{
- u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
-
- switch (hsotg->hw_params.arch) {
- case GHWCFG2_EXT_DMA_ARCH:
- dev_err(hsotg->dev, "External DMA Mode not supported\n");
- return -EINVAL;
-
- case GHWCFG2_INT_DMA_ARCH:
- dev_dbg(hsotg->dev, "Internal DMA Mode\n");
- if (hsotg->core_params->ahbcfg != -1) {
- ahbcfg &= GAHBCFG_CTRL_MASK;
- ahbcfg |= hsotg->core_params->ahbcfg &
- ~GAHBCFG_CTRL_MASK;
- }
- break;
-
- case GHWCFG2_SLAVE_ONLY_ARCH:
- default:
- dev_dbg(hsotg->dev, "Slave Only Mode\n");
- break;
- }
-
- dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n",
- hsotg->core_params->dma_enable,
- hsotg->core_params->dma_desc_enable);
-
- if (hsotg->core_params->dma_enable > 0) {
- if (hsotg->core_params->dma_desc_enable > 0)
- dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n");
- else
- dev_dbg(hsotg->dev, "Using Buffer DMA mode\n");
- } else {
- dev_dbg(hsotg->dev, "Using Slave mode\n");
- hsotg->core_params->dma_desc_enable = 0;
- }
-
- if (hsotg->core_params->dma_enable > 0)
- ahbcfg |= GAHBCFG_DMA_EN;
-
- dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
-
- return 0;
-}
-
-static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
-{
- u32 usbcfg;
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
-
- switch (hsotg->hw_params.op_mode) {
- case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
- if (hsotg->core_params->otg_cap ==
- DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_HNPCAP;
- if (hsotg->core_params->otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_SRPCAP;
- break;
-
- case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
- case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
- if (hsotg->core_params->otg_cap !=
- DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
- usbcfg |= GUSBCFG_SRPCAP;
- break;
-
- case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
- case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
- case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
- default:
- break;
- }
-
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-}
-
-/**
- * dwc2_core_init() - Initializes the DWC_otg controller registers and
- * prepares the core for device mode or host mode operation
- *
- * @hsotg: Programming view of the DWC_otg controller
- * @initial_setup: If true then this is the first init for this instance.
- */
-int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
-{
- u32 usbcfg, otgctl;
- int retval;
-
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-
- /* Set ULPI External VBUS bit if needed */
- usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
- if (hsotg->core_params->phy_ulpi_ext_vbus ==
- DWC2_PHY_ULPI_EXTERNAL_VBUS)
- usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
-
- /* Set external TS Dline pulsing bit if needed */
- usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
- if (hsotg->core_params->ts_dline > 0)
- usbcfg |= GUSBCFG_TERMSELDLPULSE;
-
- dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
-
- /*
- * Reset the Controller
- *
- * We only need to reset the controller if this is a re-init.
- * For the first init we know for sure that earlier code reset us (it
- * needed to in order to properly detect various parameters).
- */
- if (!initial_setup) {
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
- if (retval) {
- dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
- __func__);
- return retval;
- }
- }
-
- /*
- * This needs to happen in FS mode before any other programming occurs
- */
- retval = dwc2_phy_init(hsotg, initial_setup);
- if (retval)
- return retval;
-
- /* Program the GAHBCFG Register */
- retval = dwc2_gahbcfg_init(hsotg);
- if (retval)
- return retval;
-
- /* Program the GUSBCFG register */
- dwc2_gusbcfg_init(hsotg);
-
- /* Program the GOTGCTL register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_OTGVER;
- if (hsotg->core_params->otg_ver > 0)
- otgctl |= GOTGCTL_OTGVER;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
- dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
-
- /* Clear the SRP success bit for FS-I2c */
- hsotg->srp_success = 0;
-
- /* Enable common interrupts */
- dwc2_enable_common_interrupts(hsotg);
-
- /*
- * Do device or host initialization based on mode during PCD and
- * HCD initialization
- */
- if (dwc2_is_host_mode(hsotg)) {
- dev_dbg(hsotg->dev, "Host Mode\n");
- hsotg->op_state = OTG_STATE_A_HOST;
- } else {
- dev_dbg(hsotg->dev, "Device Mode\n");
- hsotg->op_state = OTG_STATE_B_PERIPHERAL;
- }
-
- return 0;
-}
-
-/**
- * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk;
-
- dev_dbg(hsotg->dev, "%s()\n", __func__);
-
- /* Disable all interrupts */
- dwc2_writel(0, hsotg->regs + GINTMSK);
- dwc2_writel(0, hsotg->regs + HAINTMSK);
-
- /* Enable the common interrupts */
- dwc2_enable_common_interrupts(hsotg);
-
- /* Enable host mode interrupts without disturbing common interrupts */
- intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/**
- * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
-{
- u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK);
-
- /* Disable host mode interrupts without disturbing common interrupts */
- intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
- GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
-}
-
-/*
- * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
- * For system that have a total fifo depth that is smaller than the default
- * RX + TX fifo size.
- *
- * @hsotg: Programming view of DWC_otg controller
- */
-static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_core_params *params = hsotg->core_params;
- struct dwc2_hw_params *hw = &hsotg->hw_params;
- u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
-
- total_fifo_size = hw->total_fifo_size;
- rxfsiz = params->host_rx_fifo_size;
- nptxfsiz = params->host_nperio_tx_fifo_size;
- ptxfsiz = params->host_perio_tx_fifo_size;
-
- /*
- * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
- * allocation with support for high bandwidth endpoints. Synopsys
- * defines MPS(Max Packet size) for a periodic EP=1024, and for
- * non-periodic as 512.
- */
- if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
- /*
- * For Buffer DMA mode/Scatter Gather DMA mode
- * 2 * ((Largest Packet size / 4) + 1 + 1) + n
- * with n = number of host channel.
- * 2 * ((1024/4) + 2) = 516
- */
- rxfsiz = 516 + hw->host_channels;
-
- /*
- * min non-periodic tx fifo depth
- * 2 * (largest non-periodic USB packet used / 4)
- * 2 * (512/4) = 256
- */
- nptxfsiz = 256;
-
- /*
- * min periodic tx fifo depth
- * (largest packet size*MC)/4
- * (1024 * 3)/4 = 768
- */
- ptxfsiz = 768;
-
- params->host_rx_fifo_size = rxfsiz;
- params->host_nperio_tx_fifo_size = nptxfsiz;
- params->host_perio_tx_fifo_size = ptxfsiz;
- }
-
- /*
- * If the summation of RX, NPTX and PTX fifo sizes is still
- * bigger than the total_fifo_size, then we have a problem.
- *
- * We won't be able to allocate as many endpoints. Right now,
- * we're just printing an error message, but ideally this FIFO
- * allocation algorithm would be improved in the future.
- *
- * FIXME improve this FIFO allocation algorithm.
- */
- if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
- dev_err(hsotg->dev, "invalid fifo sizes\n");
-}
-
-static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
-{
- struct dwc2_core_params *params = hsotg->core_params;
- u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
-
- if (!params->enable_dynamic_fifo)
- return;
-
- dwc2_calculate_dynamic_fifo(hsotg);
-
- /* Rx FIFO */
- grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
- dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
- grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
- grxfsiz |= params->host_rx_fifo_size <<
- GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
- dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ);
- dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GRXFSIZ));
-
- /* Non-periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GNPTXFSIZ));
- nptxfsiz = params->host_nperio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- nptxfsiz |= params->host_rx_fifo_size <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
- dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
- dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + GNPTXFSIZ));
-
- /* Periodic Tx FIFO */
- dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + HPTXFSIZ));
- hptxfsiz = params->host_perio_tx_fifo_size <<
- FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
- hptxfsiz |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size) <<
- FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
- dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
- dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
- dwc2_readl(hsotg->regs + HPTXFSIZ));
-
- if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
- hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
- /*
- * Global DFIFOCFG calculation for Host mode -
- * include RxFIFO, NPTXFIFO and HPTXFIFO
- */
- dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
- dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
- dfifocfg |= (params->host_rx_fifo_size +
- params->host_nperio_tx_fifo_size +
- params->host_perio_tx_fifo_size) <<
- GDFIFOCFG_EPINFOBASE_SHIFT &
- GDFIFOCFG_EPINFOBASE_MASK;
- dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG);
- }
-}
-
-/**
- * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
- * Host mode
- *
- * @hsotg: Programming view of DWC_otg controller
- *
- * This function flushes the Tx and Rx FIFOs and flushes any entries in the
- * request queues. Host channels are reset to ensure that they are ready for
- * performing transfers.
- */
-void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
-{
- u32 hcfg, hfir, otgctl;
-
- dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
-
- /* Restart the Phy Clock */
- dwc2_writel(0, hsotg->regs + PCGCTL);
-
- /* Initialize Host Configuration Register */
- dwc2_init_fs_ls_pclk_sel(hsotg);
- if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_FSLSSUPP;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
-
- /*
- * This bit allows dynamic reloading of the HFIR register during
- * runtime. This bit needs to be programmed during initial configuration
- * and its value must not be changed during runtime.
- */
- if (hsotg->core_params->reload_ctl > 0) {
- hfir = dwc2_readl(hsotg->regs + HFIR);
- hfir |= HFIR_RLDCTRL;
- dwc2_writel(hfir, hsotg->regs + HFIR);
- }
-
- if (hsotg->core_params->dma_desc_enable > 0) {
- u32 op_mode = hsotg->hw_params.op_mode;
- if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
- !hsotg->hw_params.dma_desc_enable ||
- op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
- op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
- op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
- dev_err(hsotg->dev,
- "Hardware does not support descriptor DMA mode -\n");
- dev_err(hsotg->dev,
- "falling back to buffer DMA mode.\n");
- hsotg->core_params->dma_desc_enable = 0;
- } else {
- hcfg = dwc2_readl(hsotg->regs + HCFG);
- hcfg |= HCFG_DESCDMA;
- dwc2_writel(hcfg, hsotg->regs + HCFG);
- }
- }
-
- /* Configure data FIFO sizes */
- dwc2_config_fifos(hsotg);
-
- /* TODO - check this */
- /* Clear Host Set HNP Enable in the OTG Control Register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- /* Make sure the FIFOs are flushed */
- dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
- dwc2_flush_rx_fifo(hsotg);
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
- otgctl &= ~GOTGCTL_HSTSETHNPEN;
- dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
-
- if (hsotg->core_params->dma_desc_enable <= 0) {
- int num_channels, i;
- u32 hcchar;
-
- /* Flush out any leftover queued requests */
- num_channels = hsotg->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar &= ~HCCHAR_CHENA;
- hcchar |= HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- }
-
- /* Halt all channels to put them into a known state */
- for (i = 0; i < num_channels; i++) {
- int count = 0;
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
- hcchar &= ~HCCHAR_EPDIR;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
- dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
- __func__, i);
- do {
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
- if (++count > 1000) {
- dev_err(hsotg->dev,
- "Unable to clear enable on channel %d\n",
- i);
- break;
- }
- udelay(1);
- } while (hcchar & HCCHAR_CHENA);
- }
- }
-
- /* Turn on the vbus power */
- dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
- if (hsotg->op_state == OTG_STATE_A_HOST) {
- u32 hprt0 = dwc2_read_hprt0(hsotg);
-
- dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
- !!(hprt0 & HPRT0_PWR));
- if (!(hprt0 & HPRT0_PWR)) {
- hprt0 |= HPRT0_PWR;
- dwc2_writel(hprt0, hsotg->regs + HPRT0);
- }
- }
-
- dwc2_enable_host_interrupts(hsotg);
-}
-
-static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- switch (chan->ep_type) {
- case USB_ENDPOINT_XFER_CONTROL:
- case USB_ENDPOINT_XFER_BULK:
- dev_vdbg(hsotg->dev, "control/bulk\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_STALL;
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_DATATGLERR;
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_BBLERR;
- } else {
- hcintmsk |= HCINTMSK_NAK;
- hcintmsk |= HCINTMSK_NYET;
- if (chan->do_ping)
- hcintmsk |= HCINTMSK_ACK;
- }
-
- if (chan->do_split) {
- hcintmsk |= HCINTMSK_NAK;
- if (chan->complete_split)
- hcintmsk |= HCINTMSK_NYET;
- else
- hcintmsk |= HCINTMSK_ACK;
- }
-
- if (chan->error_state)
- hcintmsk |= HCINTMSK_ACK;
- break;
-
- case USB_ENDPOINT_XFER_INT:
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "intr\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_NAK;
- hcintmsk |= HCINTMSK_STALL;
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_DATATGLERR;
- hcintmsk |= HCINTMSK_FRMOVRUN;
-
- if (chan->ep_is_in)
- hcintmsk |= HCINTMSK_BBLERR;
- if (chan->error_state)
- hcintmsk |= HCINTMSK_ACK;
- if (chan->do_split) {
- if (chan->complete_split)
- hcintmsk |= HCINTMSK_NYET;
- else
- hcintmsk |= HCINTMSK_ACK;
- }
- break;
-
- case USB_ENDPOINT_XFER_ISOC:
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "isoc\n");
- hcintmsk |= HCINTMSK_XFERCOMPL;
- hcintmsk |= HCINTMSK_FRMOVRUN;
- hcintmsk |= HCINTMSK_ACK;
-
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_XACTERR;
- hcintmsk |= HCINTMSK_BBLERR;
- }
- break;
- default:
- dev_err(hsotg->dev, "## Unknown EP type ##\n");
- break;
- }
-
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
-}
-
-static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- /*
- * For Descriptor DMA mode core halts the channel on AHB error.
- * Interrupt is not required.
- */
- if (hsotg->core_params->dma_desc_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA disabled\n");
- hcintmsk |= HCINTMSK_AHBERR;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA enabled\n");
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- hcintmsk |= HCINTMSK_XFERCOMPL;
- }
-
- if (chan->error_state && !chan->do_split &&
- chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "setting ACK\n");
- hcintmsk |= HCINTMSK_ACK;
- if (chan->ep_is_in) {
- hcintmsk |= HCINTMSK_DATATGLERR;
- if (chan->ep_type != USB_ENDPOINT_XFER_INT)
- hcintmsk |= HCINTMSK_NAK;
- }
- }
-
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
-}
-
-static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 intmsk;
-
- if (hsotg->core_params->dma_enable > 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA enabled\n");
- dwc2_hc_enable_dma_ints(hsotg, chan);
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA disabled\n");
- dwc2_hc_enable_slave_ints(hsotg, chan);
- }
-
- /* Enable the top level host channel interrupt */
- intmsk = dwc2_readl(hsotg->regs + HAINTMSK);
- intmsk |= 1 << chan->hc_num;
- dwc2_writel(intmsk, hsotg->regs + HAINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
-
- /* Make sure host channel interrupts are enabled */
- intmsk = dwc2_readl(hsotg->regs + GINTMSK);
- intmsk |= GINTSTS_HCHINT;
- dwc2_writel(intmsk, hsotg->regs + GINTMSK);
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
-}
-
-/**
- * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
- * a specific endpoint
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * The HCCHARn register is set up with the characteristics specified in chan.
- * Host channel interrupts that may need to be serviced while this transfer is
- * in progress are enabled.
- */
-void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
-{
- u8 hc_num = chan->hc_num;
- u32 hcintmsk;
- u32 hcchar;
- u32 hcsplt = 0;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- /* Clear old interrupt conditions for this host channel */
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
- dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num));
-
- /* Enable channel interrupts required for this transfer */
- dwc2_hc_enable_ints(hsotg, chan);
-
- /*
- * Program the HCCHARn register with the endpoint characteristics for
- * the current transfer
- */
- hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
- hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
- if (chan->ep_is_in)
- hcchar |= HCCHAR_EPDIR;
- if (chan->speed == USB_SPEED_LOW)
- hcchar |= HCCHAR_LSPDDEV;
- hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
- hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
- hc_num, hcchar);
-
- dev_vdbg(hsotg->dev, "%s: Channel %d\n",
- __func__, hc_num);
- dev_vdbg(hsotg->dev, " Dev Addr: %d\n",
- chan->dev_addr);
- dev_vdbg(hsotg->dev, " Ep Num: %d\n",
- chan->ep_num);
- dev_vdbg(hsotg->dev, " Is In: %d\n",
- chan->ep_is_in);
- dev_vdbg(hsotg->dev, " Is Low Speed: %d\n",
- chan->speed == USB_SPEED_LOW);
- dev_vdbg(hsotg->dev, " Ep Type: %d\n",
- chan->ep_type);
- dev_vdbg(hsotg->dev, " Max Pkt: %d\n",
- chan->max_packet);
- }
-
- /* Program the HCSPLT register for SPLITs */
- if (chan->do_split) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev,
- "Programming HC %d with split --> %s\n",
- hc_num,
- chan->complete_split ? "CSPLIT" : "SSPLIT");
- if (chan->complete_split)
- hcsplt |= HCSPLT_COMPSPLT;
- hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
- HCSPLT_XACTPOS_MASK;
- hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
- HCSPLT_HUBADDR_MASK;
- hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
- HCSPLT_PRTADDR_MASK;
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, " comp split %d\n",
- chan->complete_split);
- dev_vdbg(hsotg->dev, " xact pos %d\n",
- chan->xact_pos);
- dev_vdbg(hsotg->dev, " hub addr %d\n",
- chan->hub_addr);
- dev_vdbg(hsotg->dev, " hub port %d\n",
- chan->hub_port);
- dev_vdbg(hsotg->dev, " is_in %d\n",
- chan->ep_is_in);
- dev_vdbg(hsotg->dev, " Max Pkt %d\n",
- chan->max_packet);
- dev_vdbg(hsotg->dev, " xferlen %d\n",
- chan->xfer_len);
- }
- }
-
- dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
-}
-
-/**
- * dwc2_hc_halt() - Attempts to halt a host channel
- *
- * @hsotg: Controller register interface
- * @chan: Host channel to halt
- * @halt_status: Reason for halting the channel
- *
- * This function should only be called in Slave mode or to abort a transfer in
- * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
- * controller halts the channel when the transfer is complete or a condition
- * occurs that requires application intervention.
- *
- * In slave mode, checks for a free request queue entry, then sets the Channel
- * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
- * request queue entry, sets only the Channel Disable bit of the HCCHARn
- * register to flush requests for this channel. In the latter case, sets a
- * flag to indicate that the host channel needs to be halted when a request
- * queue slot is open.
- *
- * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- * HCCHARn register. The controller ensures there is space in the request
- * queue before submitting the halt request.
- *
- * Some time may elapse before the core flushes any posted requests for this
- * host channel and halts. The Channel Halted interrupt handler completes the
- * deactivation of the host channel.
- */
-void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
- enum dwc2_halt_status halt_status)
-{
- u32 nptxsts, hptxsts, hcchar;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
- if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
- dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
-
- if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
- halt_status == DWC2_HC_XFER_AHB_ERR) {
- /*
- * Disable all channel interrupts except Ch Halted. The QTD
- * and QH state associated with this transfer has been cleared
- * (in the case of URB_DEQUEUE), so the channel needs to be
- * shut down carefully to prevent crashes.
- */
- u32 hcintmsk = HCINTMSK_CHHLTD;
-
- dev_vdbg(hsotg->dev, "dequeue/error\n");
- dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the QTD and QH state.
- */
- dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
- * even if the channel was already halted for some other
- * reason
- */
- chan->halt_status = halt_status;
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- if (!(hcchar & HCCHAR_CHENA)) {
- /*
- * The channel is either already halted or it hasn't
- * started yet. In DMA mode, the transfer may halt if
- * it finishes normally or a condition occurs that
- * requires driver intervention. Don't want to halt
- * the channel again. In either Slave or DMA mode,
- * it's possible that the transfer has been assigned
- * to a channel, but not started yet when an URB is
- * dequeued. Don't want to halt a channel that hasn't
- * started yet.
- */
- return;
- }
- }
- if (chan->halt_pending) {
- /*
- * A halt has already been issued for this channel. This might
- * happen when a transfer is aborted by a higher level in
- * the stack.
- */
- dev_vdbg(hsotg->dev,
- "*** %s: Channel %d, chan->halt_pending already set ***\n",
- __func__, chan->hc_num);
- return;
- }
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- /* No need to set the bit in DDMA for disabling the channel */
- /* TODO check it everywhere channel is disabled */
- if (hsotg->core_params->dma_desc_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "desc DMA disabled\n");
- hcchar |= HCCHAR_CHENA;
- } else {
- if (dbg_hc(chan))
- dev_dbg(hsotg->dev, "desc DMA enabled\n");
- }
- hcchar |= HCCHAR_CHDIS;
-
- if (hsotg->core_params->dma_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA not enabled\n");
- hcchar |= HCCHAR_CHENA;
-
- /* Check for space in the request queue to issue the halt */
- if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
- chan->ep_type == USB_ENDPOINT_XFER_BULK) {
- dev_vdbg(hsotg->dev, "control/bulk\n");
- nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
- if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
- dev_vdbg(hsotg->dev, "Disabling channel\n");
- hcchar &= ~HCCHAR_CHENA;
- }
- } else {
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "isoc/intr\n");
- hptxsts = dwc2_readl(hsotg->regs + HPTXSTS);
- if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
- hsotg->queuing_high_bandwidth) {
- if (dbg_perio())
- dev_vdbg(hsotg->dev, "Disabling channel\n");
- hcchar &= ~HCCHAR_CHENA;
- }
- }
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "DMA enabled\n");
- }
-
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->halt_status = halt_status;
-
- if (hcchar & HCCHAR_CHENA) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Channel enabled\n");
- chan->halt_pending = 1;
- chan->halt_on_queue = 0;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Channel disabled\n");
- chan->halt_on_queue = 1;
- }
-
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n",
- hcchar);
- dev_vdbg(hsotg->dev, " halt_pending: %d\n",
- chan->halt_pending);
- dev_vdbg(hsotg->dev, " halt_on_queue: %d\n",
- chan->halt_on_queue);
- dev_vdbg(hsotg->dev, " halt_status: %d\n",
- chan->halt_status);
- }
-}
-
-/**
- * dwc2_hc_cleanup() - Clears the transfer state for a host channel
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Identifies the host channel to clean up
- *
- * This function is normally called after a transfer is done and the host
- * channel is being released
- */
-void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
-{
- u32 hcintmsk;
-
- chan->xfer_started = 0;
-
- list_del_init(&chan->split_order_list_entry);
-
- /*
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions
- */
- dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
- hcintmsk = 0xffffffff;
- hcintmsk &= ~HCINTMSK_RESERVED14_31;
- dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
-}
-
-/**
- * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
- * which frame a periodic transfer should occur
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Identifies the host channel to set up and its properties
- * @hcchar: Current value of the HCCHAR register for the specified host channel
- *
- * This function has no effect on non-periodic transfers
- */
-static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan, u32 *hcchar)
-{
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- int host_speed;
- int xfer_ns;
- int xfer_us;
- int bytes_in_fifo;
- u16 fifo_space;
- u16 frame_number;
- u16 wire_frame;
-
- /*
- * Try to figure out if we're an even or odd frame. If we set
- * even and the current frame number is even the the transfer
- * will happen immediately. Similar if both are odd. If one is
- * even and the other is odd then the transfer will happen when
- * the frame number ticks.
- *
- * There's a bit of a balancing act to get this right.
- * Sometimes we may want to send data in the current frame (AK
- * right away). We might want to do this if the frame number
- * _just_ ticked, but we might also want to do this in order
- * to continue a split transaction that happened late in a
- * microframe (so we didn't know to queue the next transfer
- * until the frame number had ticked). The problem is that we
- * need a lot of knowledge to know if there's actually still
- * time to send things or if it would be better to wait until
- * the next frame.
- *
- * We can look at how much time is left in the current frame
- * and make a guess about whether we'll have time to transfer.
- * We'll do that.
- */
-
- /* Get speed host is running at */
- host_speed = (chan->speed != USB_SPEED_HIGH &&
- !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
-
- /* See how many bytes are in the periodic FIFO right now */
- fifo_space = (dwc2_readl(hsotg->regs + HPTXSTS) &
- TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
- bytes_in_fifo = sizeof(u32) *
- (hsotg->core_params->host_perio_tx_fifo_size -
- fifo_space);
-
- /*
- * Roughly estimate bus time for everything in the periodic
- * queue + our new transfer. This is "rough" because we're
- * using a function that makes takes into account IN/OUT
- * and INT/ISO and we're just slamming in one value for all
- * transfers. This should be an over-estimate and that should
- * be OK, but we can probably tighten it.
- */
- xfer_ns = usb_calc_bus_time(host_speed, false, false,
- chan->xfer_len + bytes_in_fifo);
- xfer_us = NS_TO_US(xfer_ns);
-
- /* See what frame number we'll be at by the time we finish */
- frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
-
- /* This is when we were scheduled to be on the wire */
- wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
-
- /*
- * If we'd finish _after_ the frame we're scheduled in then
- * it's hopeless. Just schedule right away and hope for the
- * best. Note that it _might_ be wise to call back into the
- * scheduler to pick a better frame, but this is better than
- * nothing.
- */
- if (dwc2_frame_num_gt(frame_number, wire_frame)) {
- dwc2_sch_vdbg(hsotg,
- "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
- chan->qh, wire_frame, frame_number,
- dwc2_frame_num_dec(frame_number,
- wire_frame));
- wire_frame = frame_number;
-
- /*
- * We picked a different frame number; communicate this
- * back to the scheduler so it doesn't try to schedule
- * another in the same frame.
- *
- * Remember that next_active_frame is 1 before the wire
- * frame.
- */
- chan->qh->next_active_frame =
- dwc2_frame_num_dec(frame_number, 1);
- }
-
- if (wire_frame & 1)
- *hcchar |= HCCHAR_ODDFRM;
- else
- *hcchar &= ~HCCHAR_ODDFRM;
- }
-}
-
-static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
-{
- /* Set up the initial PID for the transfer */
- if (chan->speed == USB_SPEED_HIGH) {
- if (chan->ep_is_in) {
- if (chan->multi_count == 1)
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- else if (chan->multi_count == 2)
- chan->data_pid_start = DWC2_HC_PID_DATA1;
- else
- chan->data_pid_start = DWC2_HC_PID_DATA2;
- } else {
- if (chan->multi_count == 1)
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- else
- chan->data_pid_start = DWC2_HC_PID_MDATA;
- }
- } else {
- chan->data_pid_start = DWC2_HC_PID_DATA0;
- }
-}
-
-/**
- * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
- * the Host Channel
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * This function should only be called in Slave mode. For a channel associated
- * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
- * associated with a periodic EP, the periodic Tx FIFO is written.
- *
- * Upon return the xfer_buf and xfer_count fields in chan are incremented by
- * the number of bytes written to the Tx FIFO.
- */
-static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 i;
- u32 remaining_count;
- u32 byte_count;
- u32 dword_count;
- u32 __iomem *data_fifo;
- u32 *data_buf = (u32 *)chan->xfer_buf;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num));
-
- remaining_count = chan->xfer_len - chan->xfer_count;
- if (remaining_count > chan->max_packet)
- byte_count = chan->max_packet;
- else
- byte_count = remaining_count;
-
- dword_count = (byte_count + 3) / 4;
-
- if (((unsigned long)data_buf & 0x3) == 0) {
- /* xfer_buf is DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++)
- dwc2_writel(*data_buf, data_fifo);
- } else {
- /* xfer_buf is not DWORD aligned */
- for (i = 0; i < dword_count; i++, data_buf++) {
- u32 data = data_buf[0] | data_buf[1] << 8 |
- data_buf[2] << 16 | data_buf[3] << 24;
- dwc2_writel(data, data_fifo);
- }
- }
-
- chan->xfer_count += byte_count;
- chan->xfer_buf += byte_count;
-}
-
-/**
- * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
- * channel and starts the transfer
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel. The xfer_len value
- * may be reduced to accommodate the max widths of the XferSize and
- * PktCnt fields in the HCTSIZn register. The multi_count value may be
- * changed to reflect the final xfer_len value.
- *
- * This function may be called in either Slave mode or DMA mode. In Slave mode,
- * the caller must ensure that there is sufficient space in the request queue
- * and Tx Data FIFO.
- *
- * For an OUT transfer in Slave mode, it loads a data packet into the
- * appropriate FIFO. If necessary, additional data packets are loaded in the
- * Host ISR.
- *
- * For an IN transfer in Slave mode, a data packet is requested. The data
- * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- * additional data packets are requested in the Host ISR.
- *
- * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- * register along with a packet count of 1 and the channel is enabled. This
- * causes a single PING transaction to occur. Other fields in HCTSIZ are
- * simply set to 0 since no data transfer occurs in this case.
- *
- * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- * all the information required to perform the subsequent data transfer. In
- * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- * controller performs the entire PING protocol, then starts the data
- * transfer.
- */
-void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size;
- u16 max_hc_pkt_count = hsotg->core_params->max_packet_count;
- u32 hcchar;
- u32 hctsiz = 0;
- u16 num_packets;
- u32 ec_mc;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s()\n", __func__);
-
- if (chan->do_ping) {
- if (hsotg->core_params->dma_enable <= 0) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "ping, no DMA\n");
- dwc2_hc_do_ping(hsotg, chan);
- chan->xfer_started = 1;
- return;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "ping, DMA\n");
- hctsiz |= TSIZ_DOPNG;
- }
- }
-
- if (chan->do_split) {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "split\n");
- num_packets = 1;
-
- if (chan->complete_split && !chan->ep_is_in)
- /*
- * For CSPLIT OUT Transfer, set the size to 0 so the
- * core doesn't expect any data written to the FIFO
- */
- chan->xfer_len = 0;
- else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
- chan->xfer_len = chan->max_packet;
- else if (!chan->ep_is_in && chan->xfer_len > 188)
- chan->xfer_len = 188;
-
- hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
- TSIZ_XFERSIZE_MASK;
-
- /* For split set ec_mc for immediate retries */
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- ec_mc = 3;
- else
- ec_mc = 1;
- } else {
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "no split\n");
- /*
- * Ensure that the transfer length and packet count will fit
- * in the widths allocated for them in the HCTSIZn register
- */
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /*
- * Make sure the transfer size is no larger than one
- * (micro)frame's worth of data. (A check was done
- * when the periodic transfer was accepted to ensure
- * that a (micro)frame's worth of data can be
- * programmed into a channel.)
- */
- u32 max_periodic_len =
- chan->multi_count * chan->max_packet;
-
- if (chan->xfer_len > max_periodic_len)
- chan->xfer_len = max_periodic_len;
- } else if (chan->xfer_len > max_hc_xfer_size) {
- /*
- * Make sure that xfer_len is a multiple of max packet
- * size
- */
- chan->xfer_len =
- max_hc_xfer_size - chan->max_packet + 1;
- }
-
- if (chan->xfer_len > 0) {
- num_packets = (chan->xfer_len + chan->max_packet - 1) /
- chan->max_packet;
- if (num_packets > max_hc_pkt_count) {
- num_packets = max_hc_pkt_count;
- chan->xfer_len = num_packets * chan->max_packet;
- }
- } else {
- /* Need 1 packet for transfer length of 0 */
- num_packets = 1;
- }
-
- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- /*
- * Make sure that the multi_count field matches the
- * actual transfer length
- */
- chan->multi_count = num_packets;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- dwc2_set_pid_isoc(chan);
-
- hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
- TSIZ_XFERSIZE_MASK;
-
- /* The ec_mc gets the multi_count for non-split */
- ec_mc = chan->multi_count;
- }
-
- chan->start_pkt_count = num_packets;
- hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
- hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- TSIZ_SC_MC_PID_MASK;
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
- hctsiz, chan->hc_num);
-
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " Xfer Size: %d\n",
- (hctsiz & TSIZ_XFERSIZE_MASK) >>
- TSIZ_XFERSIZE_SHIFT);
- dev_vdbg(hsotg->dev, " Num Pkts: %d\n",
- (hctsiz & TSIZ_PKTCNT_MASK) >>
- TSIZ_PKTCNT_SHIFT);
- dev_vdbg(hsotg->dev, " Start PID: %d\n",
- (hctsiz & TSIZ_SC_MC_PID_MASK) >>
- TSIZ_SC_MC_PID_SHIFT);
- }
-
- if (hsotg->core_params->dma_enable > 0) {
- dwc2_writel((u32)chan->xfer_dma,
- hsotg->regs + HCDMA(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
- (unsigned long)chan->xfer_dma, chan->hc_num);
- }
-
- /* Start the split */
- if (chan->do_split) {
- u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
-
- hcsplt |= HCSPLT_SPLTENA;
- dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
- }
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
- dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
-
- if (hcchar & HCCHAR_CHDIS)
- dev_warn(hsotg->dev,
- "%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, chan->hc_num, hcchar);
-
- /* Set host channel enable after all other setup is complete */
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
-
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
-
- chan->xfer_started = 1;
- chan->requests++;
-
- if (hsotg->core_params->dma_enable <= 0 &&
- !chan->ep_is_in && chan->xfer_len > 0)
- /* Load OUT packet into the appropriate Tx FIFO */
- dwc2_hc_write_packet(hsotg, chan);
-}
-
-/**
- * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
- * host channel and starts the transfer in Descriptor DMA mode
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
- * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
- * with micro-frame bitmap.
- *
- * Initializes HCDMA register with descriptor list address and CTD value then
- * starts the transfer via enabling the channel.
- */
-void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- u32 hcchar;
- u32 hctsiz = 0;
-
- if (chan->do_ping)
- hctsiz |= TSIZ_DOPNG;
-
- if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
- dwc2_set_pid_isoc(chan);
-
- /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
- hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
- TSIZ_SC_MC_PID_MASK;
-
- /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
- hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
-
- /* Non-zero only for high-speed interrupt endpoints */
- hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
-
- if (dbg_hc(chan)) {
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
- dev_vdbg(hsotg->dev, " Start PID: %d\n",
- chan->data_pid_start);
- dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
- }
-
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-
- dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
- chan->desc_list_sz, DMA_TO_DEVICE);
-
- dwc2_writel(chan->desc_list_addr, hsotg->regs + HCDMA(chan->hc_num));
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
- &chan->desc_list_addr, chan->hc_num);
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar &= ~HCCHAR_MULTICNT_MASK;
- hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
- HCCHAR_MULTICNT_MASK;
-
- if (hcchar & HCCHAR_CHDIS)
- dev_warn(hsotg->dev,
- "%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, chan->hc_num, hcchar);
-
- /* Set host channel enable after all other setup is complete */
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
- (hcchar & HCCHAR_MULTICNT_MASK) >>
- HCCHAR_MULTICNT_SHIFT);
-
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
- chan->hc_num);
-
- chan->xfer_started = 1;
- chan->requests++;
-}
-
-/**
- * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
- * a previous call to dwc2_hc_start_transfer()
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * The caller must ensure there is sufficient space in the request queue and Tx
- * Data FIFO. This function should only be called in Slave mode. In DMA mode,
- * the controller acts autonomously to complete transfers programmed to a host
- * channel.
- *
- * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
- * if there is any data remaining to be queued. For an IN transfer, another
- * data packet is always requested. For the SETUP phase of a control transfer,
- * this function does nothing.
- *
- * Return: 1 if a new request is queued, 0 if no more requests are required
- * for this transfer
- */
-int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan)
-{
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
-
- if (chan->do_split)
- /* SPLITs always queue just once per channel */
- return 0;
-
- if (chan->data_pid_start == DWC2_HC_PID_SETUP)
- /* SETUPs are queued only once since they can't be NAK'd */
- return 0;
-
- if (chan->ep_is_in) {
- /*
- * Always queue another request for other IN transfers. If
- * back-to-back INs are issued and NAKs are received for both,
- * the driver may still be processing the first NAK when the
- * second NAK is received. When the interrupt handler clears
- * the NAK interrupt for the first NAK, the second NAK will
- * not be seen. So we can't depend on the NAK interrupt
- * handler to requeue a NAK'd request. Instead, IN requests
- * are issued each time this function is called. When the
- * transfer completes, the extra requests for the channel will
- * be flushed.
- */
- u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
-
- dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
- hcchar);
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
- chan->requests++;
- return 1;
- }
-
- /* OUT transfers */
-
- if (chan->xfer_count < chan->xfer_len) {
- if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
- chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
- u32 hcchar = dwc2_readl(hsotg->regs +
- HCCHAR(chan->hc_num));
-
- dwc2_hc_set_even_odd_frame(hsotg, chan,
- &hcchar);
- }
-
- /* Load OUT packet into the appropriate Tx FIFO */
- dwc2_hc_write_packet(hsotg, chan);
- chan->requests++;
- return 1;
- }
-
- return 0;
-}
-
-/**
- * dwc2_hc_do_ping() - Starts a PING transfer
- *
- * @hsotg: Programming view of DWC_otg controller
- * @chan: Information needed to initialize the host channel
- *
- * This function should only be called in Slave mode. The Do Ping bit is set in
- * the HCTSIZ register, then the channel is enabled.
- */
-void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
-{
- u32 hcchar;
- u32 hctsiz;
-
- if (dbg_hc(chan))
- dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
- chan->hc_num);
-
-
- hctsiz = TSIZ_DOPNG;
- hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
- dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
-
- hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
- hcchar |= HCCHAR_CHENA;
- hcchar &= ~HCCHAR_CHDIS;
- dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
-}
-
-/**
- * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
- * the HFIR register according to PHY type and speed
- *
- * @hsotg: Programming view of DWC_otg controller
- *
- * NOTE: The caller can modify the value of the HFIR register only after the
- * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
- * has been set
- */
-u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
-{
- u32 usbcfg;
- u32 hprt0;
- int clock = 60; /* default value */
-
- usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
- hprt0 = dwc2_readl(hsotg->regs + HPRT0);
-
- if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
- !(usbcfg & GUSBCFG_PHYIF16))
- clock = 60;
- if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
- GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
- clock = 48;
- if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
- clock = 30;
- if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
- clock = 60;
- if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
- !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
- clock = 48;
- if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
- clock = 48;
- if ((usbcfg & GUSBCFG_PHYSEL) &&
- hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
- clock = 48;
-
- if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
- /* High speed case */
- return 125 * clock - 1;
- else
- /* FS/LS case */
- return 1000 * clock - 1;
-}
-
-/**
- * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
- * buffer
- *
- * @core_if: Programming view of DWC_otg controller
- * @dest: Destination buffer for the packet
- * @bytes: Number of bytes to copy to the destination
- */
-void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
-{
- u32 __iomem *fifo = hsotg->regs + HCFIFO(0);
- u32 *data_buf = (u32 *)dest;
- int word_count = (bytes + 3) / 4;
- int i;
-
- /*
- * Todo: Account for the case where dest is not dword aligned. This
- * requires reading data from the FIFO into a u32 temp buffer, then
- * moving it into the data buffer.
- */
-
- dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
-
- for (i = 0; i < word_count; i++, data_buf++)
- *data_buf = dwc2_readl(fifo);
-}
-
/**
* dwc2_dump_host_registers() - Prints the host registers
*
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 606629aed2a8..3c58d633ce80 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -989,34 +989,11 @@ enum dwc2_halt_status {
*/
extern int dwc2_core_reset(struct dwc2_hsotg *hsotg);
extern int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg);
-extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg);
extern int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg);
extern int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore);
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
-/*
- * Host core Functions.
- * The following functions support managing the DWC_otg controller in host
- * mode.
- */
-extern void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
-extern void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
- enum dwc2_halt_status halt_status);
-extern void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan);
-extern void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan);
-extern void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan);
-extern int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan);
-extern void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
- struct dwc2_host_chan *chan);
-extern void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg);
-extern void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg);
-
-extern u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
extern bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg);
/*
@@ -1028,7 +1005,6 @@ extern void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes);
extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num);
extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg);
-extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup);
extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd);
extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index b403f6ad27b9..1f6255131857 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -54,6 +54,535 @@
#include "core.h"
#include "hcd.h"
+/*
+ * =========================================================================
+ * Host Core Layer Functions
+ * =========================================================================
+ */
+
+/**
+ * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * used in both device and host modes
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk;
+
+ /* Clear any pending OTG Interrupts */
+ dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
+
+ /* Clear any pending interrupts */
+ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
+
+ /* Enable the interrupts in the GINTMSK */
+ intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
+
+ if (hsotg->core_params->dma_enable <= 0)
+ intmsk |= GINTSTS_RXFLVL;
+ if (hsotg->core_params->external_id_pin_ctl <= 0)
+ intmsk |= GINTSTS_CONIDSTSCHNG;
+
+ intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
+ GINTSTS_SESSREQINT;
+
+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
+{
+ u32 hcfg, val;
+
+ if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->core_params->ulpi_fs_ls > 0) ||
+ hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* Full speed PHY */
+ val = HCFG_FSLSPCLKSEL_48_MHZ;
+ } else {
+ /* High speed PHY running at full speed or high speed */
+ val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+ }
+
+ dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+ hcfg = dwc2_readl(hsotg->regs + HCFG);
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+ dwc2_writel(hcfg, hsotg->regs + HCFG);
+}
+
+static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg, i2cctl;
+ int retval = 0;
+
+ /*
+ * core_init() is now called on every switch so only call the
+ * following for the first time through
+ */
+ if (select_phy) {
+ dev_dbg(hsotg->dev, "FS PHY selected\n");
+
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ if (!(usbcfg & GUSBCFG_PHYSEL)) {
+ usbcfg |= GUSBCFG_PHYSEL;
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Reset after a PHY select */
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+ }
+
+ /*
+ * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
+ * do this on HNP Dev/Host mode switches (done in dev_init and
+ * host_init).
+ */
+ if (dwc2_is_host_mode(hsotg))
+ dwc2_init_fs_ls_pclk_sel(hsotg);
+
+ if (hsotg->core_params->i2c_enable > 0) {
+ dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
+
+ /* Program GUSBCFG.OtgUtmiFsSel to I2C */
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Program GI2CCTL.I2CEn */
+ i2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
+ i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+ i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+ i2cctl &= ~GI2CCTL_I2CEN;
+ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
+ i2cctl |= GI2CCTL_I2CEN;
+ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL);
+ }
+
+ return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg, usbcfg_old;
+ int retval = 0;
+
+ if (!select_phy)
+ return 0;
+
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg_old = usbcfg;
+
+ /*
+ * HS PHY parameters. These parameters are preserved during soft reset
+ * so only program the first time. Do a soft reset immediately after
+ * setting phyif.
+ */
+ switch (hsotg->core_params->phy_type) {
+ case DWC2_PHY_TYPE_PARAM_ULPI:
+ /* ULPI interface */
+ dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
+ usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+ usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
+ if (hsotg->core_params->phy_ulpi_ddr > 0)
+ usbcfg |= GUSBCFG_DDRSEL;
+ break;
+ case DWC2_PHY_TYPE_PARAM_UTMI:
+ /* UTMI+ interface */
+ dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
+ usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+ if (hsotg->core_params->phy_utmi_width == 16)
+ usbcfg |= GUSBCFG_PHYIF16;
+ break;
+ default:
+ dev_err(hsotg->dev, "FS PHY selected at HS!\n");
+ break;
+ }
+
+ if (usbcfg != usbcfg_old) {
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /* Reset after setting the PHY parameters */
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+
+ return retval;
+}
+
+static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg;
+ int retval = 0;
+
+ if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL &&
+ hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* If FS mode with FS PHY */
+ retval = dwc2_fs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ } else {
+ /* High speed PHY */
+ retval = dwc2_hs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ }
+
+ if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->core_params->ulpi_fs_ls > 0) {
+ dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg |= GUSBCFG_ULPI_FS_LS;
+ usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+ } else {
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+ usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+ }
+
+ return retval;
+}
+
+static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
+{
+ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
+
+ switch (hsotg->hw_params.arch) {
+ case GHWCFG2_EXT_DMA_ARCH:
+ dev_err(hsotg->dev, "External DMA Mode not supported\n");
+ return -EINVAL;
+
+ case GHWCFG2_INT_DMA_ARCH:
+ dev_dbg(hsotg->dev, "Internal DMA Mode\n");
+ if (hsotg->core_params->ahbcfg != -1) {
+ ahbcfg &= GAHBCFG_CTRL_MASK;
+ ahbcfg |= hsotg->core_params->ahbcfg &
+ ~GAHBCFG_CTRL_MASK;
+ }
+ break;
+
+ case GHWCFG2_SLAVE_ONLY_ARCH:
+ default:
+ dev_dbg(hsotg->dev, "Slave Only Mode\n");
+ break;
+ }
+
+ dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n",
+ hsotg->core_params->dma_enable,
+ hsotg->core_params->dma_desc_enable);
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (hsotg->core_params->dma_desc_enable > 0)
+ dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n");
+ else
+ dev_dbg(hsotg->dev, "Using Buffer DMA mode\n");
+ } else {
+ dev_dbg(hsotg->dev, "Using Slave mode\n");
+ hsotg->core_params->dma_desc_enable = 0;
+ }
+
+ if (hsotg->core_params->dma_enable > 0)
+ ahbcfg |= GAHBCFG_DMA_EN;
+
+ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
+
+ return 0;
+}
+
+static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
+{
+ u32 usbcfg;
+
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
+
+ switch (hsotg->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ if (hsotg->core_params->otg_cap ==
+ DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_HNPCAP;
+ if (hsotg->core_params->otg_cap !=
+ DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_SRPCAP;
+ break;
+
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ if (hsotg->core_params->otg_cap !=
+ DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_SRPCAP;
+ break;
+
+ case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
+ default:
+ break;
+ }
+
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+}
+
+/**
+ * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk;
+
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Disable all interrupts */
+ dwc2_writel(0, hsotg->regs + GINTMSK);
+ dwc2_writel(0, hsotg->regs + HAINTMSK);
+
+ /* Enable the common interrupts */
+ dwc2_enable_common_interrupts(hsotg);
+
+ /* Enable host mode interrupts without disturbing common interrupts */
+ intmsk = dwc2_readl(hsotg->regs + GINTMSK);
+ intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/**
+ * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
+{
+ u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK);
+
+ /* Disable host mode interrupts without disturbing common interrupts */
+ intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
+ GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
+}
+
+/*
+ * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
+ * For system that have a total fifo depth that is smaller than the default
+ * RX + TX fifo size.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *params = hsotg->core_params;
+ struct dwc2_hw_params *hw = &hsotg->hw_params;
+ u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
+
+ total_fifo_size = hw->total_fifo_size;
+ rxfsiz = params->host_rx_fifo_size;
+ nptxfsiz = params->host_nperio_tx_fifo_size;
+ ptxfsiz = params->host_perio_tx_fifo_size;
+
+ /*
+ * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
+ * allocation with support for high bandwidth endpoints. Synopsys
+ * defines MPS(Max Packet size) for a periodic EP=1024, and for
+ * non-periodic as 512.
+ */
+ if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
+ /*
+ * For Buffer DMA mode/Scatter Gather DMA mode
+ * 2 * ((Largest Packet size / 4) + 1 + 1) + n
+ * with n = number of host channel.
+ * 2 * ((1024/4) + 2) = 516
+ */
+ rxfsiz = 516 + hw->host_channels;
+
+ /*
+ * min non-periodic tx fifo depth
+ * 2 * (largest non-periodic USB packet used / 4)
+ * 2 * (512/4) = 256
+ */
+ nptxfsiz = 256;
+
+ /*
+ * min periodic tx fifo depth
+ * (largest packet size*MC)/4
+ * (1024 * 3)/4 = 768
+ */
+ ptxfsiz = 768;
+
+ params->host_rx_fifo_size = rxfsiz;
+ params->host_nperio_tx_fifo_size = nptxfsiz;
+ params->host_perio_tx_fifo_size = ptxfsiz;
+ }
+
+ /*
+ * If the summation of RX, NPTX and PTX fifo sizes is still
+ * bigger than the total_fifo_size, then we have a problem.
+ *
+ * We won't be able to allocate as many endpoints. Right now,
+ * we're just printing an error message, but ideally this FIFO
+ * allocation algorithm would be improved in the future.
+ *
+ * FIXME improve this FIFO allocation algorithm.
+ */
+ if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
+ dev_err(hsotg->dev, "invalid fifo sizes\n");
+}
+
+static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *params = hsotg->core_params;
+ u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
+
+ if (!params->enable_dynamic_fifo)
+ return;
+
+ dwc2_calculate_dynamic_fifo(hsotg);
+
+ /* Rx FIFO */
+ grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
+ dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
+ grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
+ grxfsiz |= params->host_rx_fifo_size <<
+ GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
+ dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ);
+ dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
+ dwc2_readl(hsotg->regs + GRXFSIZ));
+
+ /* Non-periodic Tx FIFO */
+ dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
+ dwc2_readl(hsotg->regs + GNPTXFSIZ));
+ nptxfsiz = params->host_nperio_tx_fifo_size <<
+ FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+ nptxfsiz |= params->host_rx_fifo_size <<
+ FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+ dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ);
+ dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
+ dwc2_readl(hsotg->regs + GNPTXFSIZ));
+
+ /* Periodic Tx FIFO */
+ dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
+ dwc2_readl(hsotg->regs + HPTXFSIZ));
+ hptxfsiz = params->host_perio_tx_fifo_size <<
+ FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
+ hptxfsiz |= (params->host_rx_fifo_size +
+ params->host_nperio_tx_fifo_size) <<
+ FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
+ dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
+ dwc2_readl(hsotg->regs + HPTXFSIZ));
+
+ if (hsotg->core_params->en_multiple_tx_fifo > 0 &&
+ hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) {
+ /*
+ * Global DFIFOCFG calculation for Host mode -
+ * include RxFIFO, NPTXFIFO and HPTXFIFO
+ */
+ dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
+ dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
+ dfifocfg |= (params->host_rx_fifo_size +
+ params->host_nperio_tx_fifo_size +
+ params->host_perio_tx_fifo_size) <<
+ GDFIFOCFG_EPINFOBASE_SHIFT &
+ GDFIFOCFG_EPINFOBASE_MASK;
+ dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG);
+ }
+}
+
+/**
+ * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
+ * the HFIR register according to PHY type and speed
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * NOTE: The caller can modify the value of the HFIR register only after the
+ * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
+ * has been set
+ */
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
+{
+ u32 usbcfg;
+ u32 hprt0;
+ int clock = 60; /* default value */
+
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+
+ if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
+ !(usbcfg & GUSBCFG_PHYIF16))
+ clock = 60;
+ if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
+ GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
+ clock = 48;
+ if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+ clock = 30;
+ if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
+ clock = 60;
+ if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
+ !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
+ clock = 48;
+ if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
+ clock = 48;
+ if ((usbcfg & GUSBCFG_PHYSEL) &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
+ clock = 48;
+
+ if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
+ /* High speed case */
+ return 125 * clock - 1;
+
+ /* FS/LS case */
+ return 1000 * clock - 1;
+}
+
+/**
+ * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
+ * buffer
+ *
+ * @core_if: Programming view of DWC_otg controller
+ * @dest: Destination buffer for the packet
+ * @bytes: Number of bytes to copy to the destination
+ */
+void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
+{
+ u32 __iomem *fifo = hsotg->regs + HCFIFO(0);
+ u32 *data_buf = (u32 *)dest;
+ int word_count = (bytes + 3) / 4;
+ int i;
+
+ /*
+ * Todo: Account for the case where dest is not dword aligned. This
+ * requires reading data from the FIFO into a u32 temp buffer, then
+ * moving it into the data buffer.
+ */
+
+ dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
+
+ for (i = 0; i < word_count; i++, data_buf++)
+ *data_buf = dwc2_readl(fifo);
+}
+
/**
* dwc2_dump_channel_info() - Prints the state of a host channel
*
@@ -77,7 +606,7 @@ static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
u32 hc_dma;
int i;
- if (chan == NULL)
+ if (!chan)
return;
hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
@@ -120,6 +649,1056 @@ static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
}
/*
+ * =========================================================================
+ * Low Level Host Channel Access Functions
+ * =========================================================================
+ */
+
+static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ switch (chan->ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ dev_vdbg(hsotg->dev, "control/bulk\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_STALL;
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_BBLERR;
+ } else {
+ hcintmsk |= HCINTMSK_NAK;
+ hcintmsk |= HCINTMSK_NYET;
+ if (chan->do_ping)
+ hcintmsk |= HCINTMSK_ACK;
+ }
+
+ if (chan->do_split) {
+ hcintmsk |= HCINTMSK_NAK;
+ if (chan->complete_split)
+ hcintmsk |= HCINTMSK_NYET;
+ else
+ hcintmsk |= HCINTMSK_ACK;
+ }
+
+ if (chan->error_state)
+ hcintmsk |= HCINTMSK_ACK;
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "intr\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_NAK;
+ hcintmsk |= HCINTMSK_STALL;
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ hcintmsk |= HCINTMSK_FRMOVRUN;
+
+ if (chan->ep_is_in)
+ hcintmsk |= HCINTMSK_BBLERR;
+ if (chan->error_state)
+ hcintmsk |= HCINTMSK_ACK;
+ if (chan->do_split) {
+ if (chan->complete_split)
+ hcintmsk |= HCINTMSK_NYET;
+ else
+ hcintmsk |= HCINTMSK_ACK;
+ }
+ break;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "isoc\n");
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ hcintmsk |= HCINTMSK_FRMOVRUN;
+ hcintmsk |= HCINTMSK_ACK;
+
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_XACTERR;
+ hcintmsk |= HCINTMSK_BBLERR;
+ }
+ break;
+ default:
+ dev_err(hsotg->dev, "## Unknown EP type ##\n");
+ break;
+ }
+
+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ /*
+ * For Descriptor DMA mode core halts the channel on AHB error.
+ * Interrupt is not required.
+ */
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+ hcintmsk |= HCINTMSK_AHBERR;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA enabled\n");
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ hcintmsk |= HCINTMSK_XFERCOMPL;
+ }
+
+ if (chan->error_state && !chan->do_split &&
+ chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "setting ACK\n");
+ hcintmsk |= HCINTMSK_ACK;
+ if (chan->ep_is_in) {
+ hcintmsk |= HCINTMSK_DATATGLERR;
+ if (chan->ep_type != USB_ENDPOINT_XFER_INT)
+ hcintmsk |= HCINTMSK_NAK;
+ }
+ }
+
+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
+}
+
+static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 intmsk;
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA enabled\n");
+ dwc2_hc_enable_dma_ints(hsotg, chan);
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA disabled\n");
+ dwc2_hc_enable_slave_ints(hsotg, chan);
+ }
+
+ /* Enable the top level host channel interrupt */
+ intmsk = dwc2_readl(hsotg->regs + HAINTMSK);
+ intmsk |= 1 << chan->hc_num;
+ dwc2_writel(intmsk, hsotg->regs + HAINTMSK);
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
+
+ /* Make sure host channel interrupts are enabled */
+ intmsk = dwc2_readl(hsotg->regs + GINTMSK);
+ intmsk |= GINTSTS_HCHINT;
+ dwc2_writel(intmsk, hsotg->regs + GINTMSK);
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
+}
+
+/**
+ * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
+ * a specific endpoint
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * The HCCHARn register is set up with the characteristics specified in chan.
+ * Host channel interrupts that may need to be serviced while this transfer is
+ * in progress are enabled.
+ */
+static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+ u8 hc_num = chan->hc_num;
+ u32 hcintmsk;
+ u32 hcchar;
+ u32 hcsplt = 0;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Clear old interrupt conditions for this host channel */
+ hcintmsk = 0xffffffff;
+ hcintmsk &= ~HCINTMSK_RESERVED14_31;
+ dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num));
+
+ /* Enable channel interrupts required for this transfer */
+ dwc2_hc_enable_ints(hsotg, chan);
+
+ /*
+ * Program the HCCHARn register with the endpoint characteristics for
+ * the current transfer
+ */
+ hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
+ hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
+ if (chan->ep_is_in)
+ hcchar |= HCCHAR_EPDIR;
+ if (chan->speed == USB_SPEED_LOW)
+ hcchar |= HCCHAR_LSPDDEV;
+ hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
+ hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num));
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
+ hc_num, hcchar);
+
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n",
+ __func__, hc_num);
+ dev_vdbg(hsotg->dev, " Dev Addr: %d\n",
+ chan->dev_addr);
+ dev_vdbg(hsotg->dev, " Ep Num: %d\n",
+ chan->ep_num);
+ dev_vdbg(hsotg->dev, " Is In: %d\n",
+ chan->ep_is_in);
+ dev_vdbg(hsotg->dev, " Is Low Speed: %d\n",
+ chan->speed == USB_SPEED_LOW);
+ dev_vdbg(hsotg->dev, " Ep Type: %d\n",
+ chan->ep_type);
+ dev_vdbg(hsotg->dev, " Max Pkt: %d\n",
+ chan->max_packet);
+ }
+
+ /* Program the HCSPLT register for SPLITs */
+ if (chan->do_split) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev,
+ "Programming HC %d with split --> %s\n",
+ hc_num,
+ chan->complete_split ? "CSPLIT" : "SSPLIT");
+ if (chan->complete_split)
+ hcsplt |= HCSPLT_COMPSPLT;
+ hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
+ HCSPLT_XACTPOS_MASK;
+ hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
+ HCSPLT_HUBADDR_MASK;
+ hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
+ HCSPLT_PRTADDR_MASK;
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, " comp split %d\n",
+ chan->complete_split);
+ dev_vdbg(hsotg->dev, " xact pos %d\n",
+ chan->xact_pos);
+ dev_vdbg(hsotg->dev, " hub addr %d\n",
+ chan->hub_addr);
+ dev_vdbg(hsotg->dev, " hub port %d\n",
+ chan->hub_port);
+ dev_vdbg(hsotg->dev, " is_in %d\n",
+ chan->ep_is_in);
+ dev_vdbg(hsotg->dev, " Max Pkt %d\n",
+ chan->max_packet);
+ dev_vdbg(hsotg->dev, " xferlen %d\n",
+ chan->xfer_len);
+ }
+ }
+
+ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num));
+}
+
+/**
+ * dwc2_hc_halt() - Attempts to halt a host channel
+ *
+ * @hsotg: Controller register interface
+ * @chan: Host channel to halt
+ * @halt_status: Reason for halting the channel
+ *
+ * This function should only be called in Slave mode or to abort a transfer in
+ * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
+ * controller halts the channel when the transfer is complete or a condition
+ * occurs that requires application intervention.
+ *
+ * In slave mode, checks for a free request queue entry, then sets the Channel
+ * Enable and Channel Disable bits of the Host Channel Characteristics
+ * register of the specified channel to intiate the halt. If there is no free
+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
+ * register to flush requests for this channel. In the latter case, sets a
+ * flag to indicate that the host channel needs to be halted when a request
+ * queue slot is open.
+ *
+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
+ * HCCHARn register. The controller ensures there is space in the request
+ * queue before submitting the halt request.
+ *
+ * Some time may elapse before the core flushes any posted requests for this
+ * host channel and halts. The Channel Halted interrupt handler completes the
+ * deactivation of the host channel.
+ */
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+ enum dwc2_halt_status halt_status)
+{
+ u32 nptxsts, hptxsts, hcchar;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+ if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
+ dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
+
+ if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+ halt_status == DWC2_HC_XFER_AHB_ERR) {
+ /*
+ * Disable all channel interrupts except Ch Halted. The QTD
+ * and QH state associated with this transfer has been cleared
+ * (in the case of URB_DEQUEUE), so the channel needs to be
+ * shut down carefully to prevent crashes.
+ */
+ u32 hcintmsk = HCINTMSK_CHHLTD;
+
+ dev_vdbg(hsotg->dev, "dequeue/error\n");
+ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num));
+
+ /*
+ * Make sure no other interrupts besides halt are currently
+ * pending. Handling another interrupt could cause a crash due
+ * to the QTD and QH state.
+ */
+ dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num));
+
+ /*
+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
+ * even if the channel was already halted for some other
+ * reason
+ */
+ chan->halt_status = halt_status;
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+ if (!(hcchar & HCCHAR_CHENA)) {
+ /*
+ * The channel is either already halted or it hasn't
+ * started yet. In DMA mode, the transfer may halt if
+ * it finishes normally or a condition occurs that
+ * requires driver intervention. Don't want to halt
+ * the channel again. In either Slave or DMA mode,
+ * it's possible that the transfer has been assigned
+ * to a channel, but not started yet when an URB is
+ * dequeued. Don't want to halt a channel that hasn't
+ * started yet.
+ */
+ return;
+ }
+ }
+ if (chan->halt_pending) {
+ /*
+ * A halt has already been issued for this channel. This might
+ * happen when a transfer is aborted by a higher level in
+ * the stack.
+ */
+ dev_vdbg(hsotg->dev,
+ "*** %s: Channel %d, chan->halt_pending already set ***\n",
+ __func__, chan->hc_num);
+ return;
+ }
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+
+ /* No need to set the bit in DDMA for disabling the channel */
+ /* TODO check it everywhere channel is disabled */
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "desc DMA disabled\n");
+ hcchar |= HCCHAR_CHENA;
+ } else {
+ if (dbg_hc(chan))
+ dev_dbg(hsotg->dev, "desc DMA enabled\n");
+ }
+ hcchar |= HCCHAR_CHDIS;
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA not enabled\n");
+ hcchar |= HCCHAR_CHENA;
+
+ /* Check for space in the request queue to issue the halt */
+ if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+ chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+ dev_vdbg(hsotg->dev, "control/bulk\n");
+ nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
+ if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
+ dev_vdbg(hsotg->dev, "Disabling channel\n");
+ hcchar &= ~HCCHAR_CHENA;
+ }
+ } else {
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "isoc/intr\n");
+ hptxsts = dwc2_readl(hsotg->regs + HPTXSTS);
+ if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
+ hsotg->queuing_high_bandwidth) {
+ if (dbg_perio())
+ dev_vdbg(hsotg->dev, "Disabling channel\n");
+ hcchar &= ~HCCHAR_CHENA;
+ }
+ }
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "DMA enabled\n");
+ }
+
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ chan->halt_status = halt_status;
+
+ if (hcchar & HCCHAR_CHENA) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Channel enabled\n");
+ chan->halt_pending = 1;
+ chan->halt_on_queue = 0;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Channel disabled\n");
+ chan->halt_on_queue = 1;
+ }
+
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n",
+ hcchar);
+ dev_vdbg(hsotg->dev, " halt_pending: %d\n",
+ chan->halt_pending);
+ dev_vdbg(hsotg->dev, " halt_on_queue: %d\n",
+ chan->halt_on_queue);
+ dev_vdbg(hsotg->dev, " halt_status: %d\n",
+ chan->halt_status);
+ }
+}
+
+/**
+ * dwc2_hc_cleanup() - Clears the transfer state for a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Identifies the host channel to clean up
+ *
+ * This function is normally called after a transfer is done and the host
+ * channel is being released
+ */
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
+{
+ u32 hcintmsk;
+
+ chan->xfer_started = 0;
+
+ list_del_init(&chan->split_order_list_entry);
+
+ /*
+ * Clear channel interrupt enables and any unhandled channel interrupt
+ * conditions
+ */
+ dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num));
+ hcintmsk = 0xffffffff;
+ hcintmsk &= ~HCINTMSK_RESERVED14_31;
+ dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
+ * which frame a periodic transfer should occur
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Identifies the host channel to set up and its properties
+ * @hcchar: Current value of the HCCHAR register for the specified host channel
+ *
+ * This function has no effect on non-periodic transfers
+ */
+static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, u32 *hcchar)
+{
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ int host_speed;
+ int xfer_ns;
+ int xfer_us;
+ int bytes_in_fifo;
+ u16 fifo_space;
+ u16 frame_number;
+ u16 wire_frame;
+
+ /*
+ * Try to figure out if we're an even or odd frame. If we set
+ * even and the current frame number is even the the transfer
+ * will happen immediately. Similar if both are odd. If one is
+ * even and the other is odd then the transfer will happen when
+ * the frame number ticks.
+ *
+ * There's a bit of a balancing act to get this right.
+ * Sometimes we may want to send data in the current frame (AK
+ * right away). We might want to do this if the frame number
+ * _just_ ticked, but we might also want to do this in order
+ * to continue a split transaction that happened late in a
+ * microframe (so we didn't know to queue the next transfer
+ * until the frame number had ticked). The problem is that we
+ * need a lot of knowledge to know if there's actually still
+ * time to send things or if it would be better to wait until
+ * the next frame.
+ *
+ * We can look at how much time is left in the current frame
+ * and make a guess about whether we'll have time to transfer.
+ * We'll do that.
+ */
+
+ /* Get speed host is running at */
+ host_speed = (chan->speed != USB_SPEED_HIGH &&
+ !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
+
+ /* See how many bytes are in the periodic FIFO right now */
+ fifo_space = (dwc2_readl(hsotg->regs + HPTXSTS) &
+ TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
+ bytes_in_fifo = sizeof(u32) *
+ (hsotg->core_params->host_perio_tx_fifo_size -
+ fifo_space);
+
+ /*
+ * Roughly estimate bus time for everything in the periodic
+ * queue + our new transfer. This is "rough" because we're
+ * using a function that makes takes into account IN/OUT
+ * and INT/ISO and we're just slamming in one value for all
+ * transfers. This should be an over-estimate and that should
+ * be OK, but we can probably tighten it.
+ */
+ xfer_ns = usb_calc_bus_time(host_speed, false, false,
+ chan->xfer_len + bytes_in_fifo);
+ xfer_us = NS_TO_US(xfer_ns);
+
+ /* See what frame number we'll be at by the time we finish */
+ frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
+
+ /* This is when we were scheduled to be on the wire */
+ wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
+
+ /*
+ * If we'd finish _after_ the frame we're scheduled in then
+ * it's hopeless. Just schedule right away and hope for the
+ * best. Note that it _might_ be wise to call back into the
+ * scheduler to pick a better frame, but this is better than
+ * nothing.
+ */
+ if (dwc2_frame_num_gt(frame_number, wire_frame)) {
+ dwc2_sch_vdbg(hsotg,
+ "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
+ chan->qh, wire_frame, frame_number,
+ dwc2_frame_num_dec(frame_number,
+ wire_frame));
+ wire_frame = frame_number;
+
+ /*
+ * We picked a different frame number; communicate this
+ * back to the scheduler so it doesn't try to schedule
+ * another in the same frame.
+ *
+ * Remember that next_active_frame is 1 before the wire
+ * frame.
+ */
+ chan->qh->next_active_frame =
+ dwc2_frame_num_dec(frame_number, 1);
+ }
+
+ if (wire_frame & 1)
+ *hcchar |= HCCHAR_ODDFRM;
+ else
+ *hcchar &= ~HCCHAR_ODDFRM;
+ }
+}
+
+static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
+{
+ /* Set up the initial PID for the transfer */
+ if (chan->speed == USB_SPEED_HIGH) {
+ if (chan->ep_is_in) {
+ if (chan->multi_count == 1)
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ else if (chan->multi_count == 2)
+ chan->data_pid_start = DWC2_HC_PID_DATA1;
+ else
+ chan->data_pid_start = DWC2_HC_PID_DATA2;
+ } else {
+ if (chan->multi_count == 1)
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ else
+ chan->data_pid_start = DWC2_HC_PID_MDATA;
+ }
+ } else {
+ chan->data_pid_start = DWC2_HC_PID_DATA0;
+ }
+}
+
+/**
+ * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
+ * the Host Channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. For a channel associated
+ * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
+ * associated with a periodic EP, the periodic Tx FIFO is written.
+ *
+ * Upon return the xfer_buf and xfer_count fields in chan are incremented by
+ * the number of bytes written to the Tx FIFO.
+ */
+static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 i;
+ u32 remaining_count;
+ u32 byte_count;
+ u32 dword_count;
+ u32 __iomem *data_fifo;
+ u32 *data_buf = (u32 *)chan->xfer_buf;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num));
+
+ remaining_count = chan->xfer_len - chan->xfer_count;
+ if (remaining_count > chan->max_packet)
+ byte_count = chan->max_packet;
+ else
+ byte_count = remaining_count;
+
+ dword_count = (byte_count + 3) / 4;
+
+ if (((unsigned long)data_buf & 0x3) == 0) {
+ /* xfer_buf is DWORD aligned */
+ for (i = 0; i < dword_count; i++, data_buf++)
+ dwc2_writel(*data_buf, data_fifo);
+ } else {
+ /* xfer_buf is not DWORD aligned */
+ for (i = 0; i < dword_count; i++, data_buf++) {
+ u32 data = data_buf[0] | data_buf[1] << 8 |
+ data_buf[2] << 16 | data_buf[3] << 24;
+ dwc2_writel(data, data_fifo);
+ }
+ }
+
+ chan->xfer_count += byte_count;
+ chan->xfer_buf += byte_count;
+}
+
+/**
+ * dwc2_hc_do_ping() - Starts a PING transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * This function should only be called in Slave mode. The Do Ping bit is set in
+ * the HCTSIZ register, then the channel is enabled.
+ */
+static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcchar;
+ u32 hctsiz;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+
+ hctsiz = TSIZ_DOPNG;
+ hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+}
+
+/**
+ * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
+ * channel and starts the transfer
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel. The xfer_len value
+ * may be reduced to accommodate the max widths of the XferSize and
+ * PktCnt fields in the HCTSIZn register. The multi_count value may be
+ * changed to reflect the final xfer_len value.
+ *
+ * This function may be called in either Slave mode or DMA mode. In Slave mode,
+ * the caller must ensure that there is sufficient space in the request queue
+ * and Tx Data FIFO.
+ *
+ * For an OUT transfer in Slave mode, it loads a data packet into the
+ * appropriate FIFO. If necessary, additional data packets are loaded in the
+ * Host ISR.
+ *
+ * For an IN transfer in Slave mode, a data packet is requested. The data
+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
+ * additional data packets are requested in the Host ISR.
+ *
+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
+ * register along with a packet count of 1 and the channel is enabled. This
+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
+ * simply set to 0 since no data transfer occurs in this case.
+ *
+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
+ * all the information required to perform the subsequent data transfer. In
+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
+ * controller performs the entire PING protocol, then starts the data
+ * transfer.
+ */
+static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size;
+ u16 max_hc_pkt_count = hsotg->core_params->max_packet_count;
+ u32 hcchar;
+ u32 hctsiz = 0;
+ u16 num_packets;
+ u32 ec_mc;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (chan->do_ping) {
+ if (hsotg->core_params->dma_enable <= 0) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "ping, no DMA\n");
+ dwc2_hc_do_ping(hsotg, chan);
+ chan->xfer_started = 1;
+ return;
+ }
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "ping, DMA\n");
+
+ hctsiz |= TSIZ_DOPNG;
+ }
+
+ if (chan->do_split) {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "split\n");
+ num_packets = 1;
+
+ if (chan->complete_split && !chan->ep_is_in)
+ /*
+ * For CSPLIT OUT Transfer, set the size to 0 so the
+ * core doesn't expect any data written to the FIFO
+ */
+ chan->xfer_len = 0;
+ else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
+ chan->xfer_len = chan->max_packet;
+ else if (!chan->ep_is_in && chan->xfer_len > 188)
+ chan->xfer_len = 188;
+
+ hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK;
+
+ /* For split set ec_mc for immediate retries */
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ ec_mc = 3;
+ else
+ ec_mc = 1;
+ } else {
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "no split\n");
+ /*
+ * Ensure that the transfer length and packet count will fit
+ * in the widths allocated for them in the HCTSIZn register
+ */
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /*
+ * Make sure the transfer size is no larger than one
+ * (micro)frame's worth of data. (A check was done
+ * when the periodic transfer was accepted to ensure
+ * that a (micro)frame's worth of data can be
+ * programmed into a channel.)
+ */
+ u32 max_periodic_len =
+ chan->multi_count * chan->max_packet;
+
+ if (chan->xfer_len > max_periodic_len)
+ chan->xfer_len = max_periodic_len;
+ } else if (chan->xfer_len > max_hc_xfer_size) {
+ /*
+ * Make sure that xfer_len is a multiple of max packet
+ * size
+ */
+ chan->xfer_len =
+ max_hc_xfer_size - chan->max_packet + 1;
+ }
+
+ if (chan->xfer_len > 0) {
+ num_packets = (chan->xfer_len + chan->max_packet - 1) /
+ chan->max_packet;
+ if (num_packets > max_hc_pkt_count) {
+ num_packets = max_hc_pkt_count;
+ chan->xfer_len = num_packets * chan->max_packet;
+ }
+ } else {
+ /* Need 1 packet for transfer length of 0 */
+ num_packets = 1;
+ }
+
+ if (chan->ep_is_in)
+ /*
+ * Always program an integral # of max packets for IN
+ * transfers
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ /*
+ * Make sure that the multi_count field matches the
+ * actual transfer length
+ */
+ chan->multi_count = num_packets;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ dwc2_set_pid_isoc(chan);
+
+ hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK;
+
+ /* The ec_mc gets the multi_count for non-split */
+ ec_mc = chan->multi_count;
+ }
+
+ chan->start_pkt_count = num_packets;
+ hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
+ hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+ TSIZ_SC_MC_PID_MASK;
+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
+ hctsiz, chan->hc_num);
+
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " Xfer Size: %d\n",
+ (hctsiz & TSIZ_XFERSIZE_MASK) >>
+ TSIZ_XFERSIZE_SHIFT);
+ dev_vdbg(hsotg->dev, " Num Pkts: %d\n",
+ (hctsiz & TSIZ_PKTCNT_MASK) >>
+ TSIZ_PKTCNT_SHIFT);
+ dev_vdbg(hsotg->dev, " Start PID: %d\n",
+ (hctsiz & TSIZ_SC_MC_PID_MASK) >>
+ TSIZ_SC_MC_PID_SHIFT);
+ }
+
+ if (hsotg->core_params->dma_enable > 0) {
+ dwc2_writel((u32)chan->xfer_dma,
+ hsotg->regs + HCDMA(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
+ (unsigned long)chan->xfer_dma, chan->hc_num);
+ }
+
+ /* Start the split */
+ if (chan->do_split) {
+ u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num));
+
+ hcsplt |= HCSPLT_SPLTENA;
+ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num));
+ }
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar &= ~HCCHAR_MULTICNT_MASK;
+ hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
+ dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+
+ if (hcchar & HCCHAR_CHDIS)
+ dev_warn(hsotg->dev,
+ "%s: chdis set, channel %d, hcchar 0x%08x\n",
+ __func__, chan->hc_num, hcchar);
+
+ /* Set host channel enable after all other setup is complete */
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
+ (hcchar & HCCHAR_MULTICNT_MASK) >>
+ HCCHAR_MULTICNT_SHIFT);
+
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+ chan->hc_num);
+
+ chan->xfer_started = 1;
+ chan->requests++;
+
+ if (hsotg->core_params->dma_enable <= 0 &&
+ !chan->ep_is_in && chan->xfer_len > 0)
+ /* Load OUT packet into the appropriate Tx FIFO */
+ dwc2_hc_write_packet(hsotg, chan);
+}
+
+/**
+ * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
+ * host channel and starts the transfer in Descriptor DMA mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
+ * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
+ * with micro-frame bitmap.
+ *
+ * Initializes HCDMA register with descriptor list address and CTD value then
+ * starts the transfer via enabling the channel.
+ */
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ u32 hcchar;
+ u32 hctsiz = 0;
+
+ if (chan->do_ping)
+ hctsiz |= TSIZ_DOPNG;
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ dwc2_set_pid_isoc(chan);
+
+ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
+ hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
+ TSIZ_SC_MC_PID_MASK;
+
+ /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
+ hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
+
+ /* Non-zero only for high-speed interrupt endpoints */
+ hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
+
+ if (dbg_hc(chan)) {
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+ dev_vdbg(hsotg->dev, " Start PID: %d\n",
+ chan->data_pid_start);
+ dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
+ }
+
+ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
+
+ dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
+ chan->desc_list_sz, DMA_TO_DEVICE);
+
+ dwc2_writel(chan->desc_list_addr, hsotg->regs + HCDMA(chan->hc_num));
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
+ &chan->desc_list_addr, chan->hc_num);
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcchar &= ~HCCHAR_MULTICNT_MASK;
+ hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
+ HCCHAR_MULTICNT_MASK;
+
+ if (hcchar & HCCHAR_CHDIS)
+ dev_warn(hsotg->dev,
+ "%s: chdis set, channel %d, hcchar 0x%08x\n",
+ __func__, chan->hc_num, hcchar);
+
+ /* Set host channel enable after all other setup is complete */
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
+ (hcchar & HCCHAR_MULTICNT_MASK) >>
+ HCCHAR_MULTICNT_SHIFT);
+
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
+ chan->hc_num);
+
+ chan->xfer_started = 1;
+ chan->requests++;
+}
+
+/**
+ * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
+ * a previous call to dwc2_hc_start_transfer()
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Information needed to initialize the host channel
+ *
+ * The caller must ensure there is sufficient space in the request queue and Tx
+ * Data FIFO. This function should only be called in Slave mode. In DMA mode,
+ * the controller acts autonomously to complete transfers programmed to a host
+ * channel.
+ *
+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
+ * if there is any data remaining to be queued. For an IN transfer, another
+ * data packet is always requested. For the SETUP phase of a control transfer,
+ * this function does nothing.
+ *
+ * Return: 1 if a new request is queued, 0 if no more requests are required
+ * for this transfer
+ */
+static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
+ chan->hc_num);
+
+ if (chan->do_split)
+ /* SPLITs always queue just once per channel */
+ return 0;
+
+ if (chan->data_pid_start == DWC2_HC_PID_SETUP)
+ /* SETUPs are queued only once since they can't be NAK'd */
+ return 0;
+
+ if (chan->ep_is_in) {
+ /*
+ * Always queue another request for other IN transfers. If
+ * back-to-back INs are issued and NAKs are received for both,
+ * the driver may still be processing the first NAK when the
+ * second NAK is received. When the interrupt handler clears
+ * the NAK interrupt for the first NAK, the second NAK will
+ * not be seen. So we can't depend on the NAK interrupt
+ * handler to requeue a NAK'd request. Instead, IN requests
+ * are issued each time this function is called. When the
+ * transfer completes, the extra requests for the channel will
+ * be flushed.
+ */
+ u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
+
+ dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
+ hcchar |= HCCHAR_CHENA;
+ hcchar &= ~HCCHAR_CHDIS;
+ if (dbg_hc(chan))
+ dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
+ hcchar);
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num));
+ chan->requests++;
+ return 1;
+ }
+
+ /* OUT transfers */
+
+ if (chan->xfer_count < chan->xfer_len) {
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ u32 hcchar = dwc2_readl(hsotg->regs +
+ HCCHAR(chan->hc_num));
+
+ dwc2_hc_set_even_odd_frame(hsotg, chan,
+ &hcchar);
+ }
+
+ /* Load OUT packet into the appropriate Tx FIFO */
+ dwc2_hc_write_packet(hsotg, chan);
+ chan->requests++;
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * =========================================================================
+ * HCD
+ * =========================================================================
+ */
+
+/*
* Processes all the URBs in a single list of QHs. Completes them with
* -ETIMEDOUT and frees the QTD.
*
@@ -588,6 +2167,224 @@ static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
return 0;
}
+/**
+ * dwc2_core_init() - Initializes the DWC_otg controller registers and
+ * prepares the core for device mode or host mode operation
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @initial_setup: If true then this is the first init for this instance.
+ */
+static int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
+{
+ u32 usbcfg, otgctl;
+ int retval;
+
+ dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+ /* Set ULPI External VBUS bit if needed */
+ usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
+ if (hsotg->core_params->phy_ulpi_ext_vbus ==
+ DWC2_PHY_ULPI_EXTERNAL_VBUS)
+ usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
+
+ /* Set external TS Dline pulsing bit if needed */
+ usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
+ if (hsotg->core_params->ts_dline > 0)
+ usbcfg |= GUSBCFG_TERMSELDLPULSE;
+
+ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
+ /*
+ * Reset the Controller
+ *
+ * We only need to reset the controller if this is a re-init.
+ * For the first init we know for sure that earlier code reset us (it
+ * needed to in order to properly detect various parameters).
+ */
+ if (!initial_setup) {
+ retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ if (retval) {
+ dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+ __func__);
+ return retval;
+ }
+ }
+
+ /*
+ * This needs to happen in FS mode before any other programming occurs
+ */
+ retval = dwc2_phy_init(hsotg, initial_setup);
+ if (retval)
+ return retval;
+
+ /* Program the GAHBCFG Register */
+ retval = dwc2_gahbcfg_init(hsotg);
+ if (retval)
+ return retval;
+
+ /* Program the GUSBCFG register */
+ dwc2_gusbcfg_init(hsotg);
+
+ /* Program the GOTGCTL register */
+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_OTGVER;
+ if (hsotg->core_params->otg_ver > 0)
+ otgctl |= GOTGCTL_OTGVER;
+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
+ dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver);
+
+ /* Clear the SRP success bit for FS-I2c */
+ hsotg->srp_success = 0;
+
+ /* Enable common interrupts */
+ dwc2_enable_common_interrupts(hsotg);
+
+ /*
+ * Do device or host initialization based on mode during PCD and
+ * HCD initialization
+ */
+ if (dwc2_is_host_mode(hsotg)) {
+ dev_dbg(hsotg->dev, "Host Mode\n");
+ hsotg->op_state = OTG_STATE_A_HOST;
+ } else {
+ dev_dbg(hsotg->dev, "Device Mode\n");
+ hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+ }
+
+ return 0;
+}
+
+/**
+ * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
+ * Host mode
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This function flushes the Tx and Rx FIFOs and flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ */
+static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
+{
+ u32 hcfg, hfir, otgctl;
+
+ dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+ /* Restart the Phy Clock */
+ dwc2_writel(0, hsotg->regs + PCGCTL);
+
+ /* Initialize Host Configuration Register */
+ dwc2_init_fs_ls_pclk_sel(hsotg);
+ if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) {
+ hcfg = dwc2_readl(hsotg->regs + HCFG);
+ hcfg |= HCFG_FSLSSUPP;
+ dwc2_writel(hcfg, hsotg->regs + HCFG);
+ }
+
+ /*
+ * This bit allows dynamic reloading of the HFIR register during
+ * runtime. This bit needs to be programmed during initial configuration
+ * and its value must not be changed during runtime.
+ */
+ if (hsotg->core_params->reload_ctl > 0) {
+ hfir = dwc2_readl(hsotg->regs + HFIR);
+ hfir |= HFIR_RLDCTRL;
+ dwc2_writel(hfir, hsotg->regs + HFIR);
+ }
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ u32 op_mode = hsotg->hw_params.op_mode;
+
+ if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
+ !hsotg->hw_params.dma_desc_enable ||
+ op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
+ dev_err(hsotg->dev,
+ "Hardware does not support descriptor DMA mode -\n");
+ dev_err(hsotg->dev,
+ "falling back to buffer DMA mode.\n");
+ hsotg->core_params->dma_desc_enable = 0;
+ } else {
+ hcfg = dwc2_readl(hsotg->regs + HCFG);
+ hcfg |= HCFG_DESCDMA;
+ dwc2_writel(hcfg, hsotg->regs + HCFG);
+ }
+ }
+
+ /* Configure data FIFO sizes */
+ dwc2_config_fifos(hsotg);
+
+ /* TODO - check this */
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_HSTSETHNPEN;
+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
+
+ /* Make sure the FIFOs are flushed */
+ dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
+ dwc2_flush_rx_fifo(hsotg);
+
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ otgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ otgctl &= ~GOTGCTL_HSTSETHNPEN;
+ dwc2_writel(otgctl, hsotg->regs + GOTGCTL);
+
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ int num_channels, i;
+ u32 hcchar;
+
+ /* Flush out any leftover queued requests */
+ num_channels = hsotg->core_params->host_channels;
+ for (i = 0; i < num_channels; i++) {
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
+ hcchar &= ~HCCHAR_CHENA;
+ hcchar |= HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
+ }
+
+ /* Halt all channels to put them into a known state */
+ for (i = 0; i < num_channels; i++) {
+ int count = 0;
+
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
+ hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i));
+ dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
+ __func__, i);
+ do {
+ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i));
+ if (++count > 1000) {
+ dev_err(hsotg->dev,
+ "Unable to clear enable on channel %d\n",
+ i);
+ break;
+ }
+ udelay(1);
+ } while (hcchar & HCCHAR_CHENA);
+ }
+ }
+
+ /* Turn on the vbus power */
+ dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
+ if (hsotg->op_state == OTG_STATE_A_HOST) {
+ u32 hprt0 = dwc2_read_hprt0(hsotg);
+
+ dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
+ !!(hprt0 & HPRT0_PWR));
+ if (!(hprt0 & HPRT0_PWR)) {
+ hprt0 |= HPRT0_PWR;
+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
+ }
+ }
+
+ dwc2_enable_host_interrupts(hsotg);
+}
+
/*
* Initializes dynamic portions of the DWC_otg HCD state
*
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 140b1511a131..89fa26cb25f4 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -430,6 +430,8 @@ struct hc_xfer_info {
};
#endif
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
+
/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
{
@@ -451,6 +453,12 @@ static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
}
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+ enum dwc2_halt_status halt_status);
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan);
+
/*
* Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
* are read as 1, they won't clear when written back.