diff options
author | Michael Grzeschik <m.grzeschik@pengutronix.de> | 2022-06-07 14:45:22 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-06-12 07:49:46 +0300 |
commit | f061f43d7418cb62b8d073e221ec75d3f5b89e17 (patch) | |
tree | 59d311ae1af0105d165ee26ec129c122c9e6e545 /drivers/usb/core | |
parent | 5fd6c4f0a649c956b2c50c18e0da765b7f5e3eff (diff) | |
download | linux-f061f43d7418cb62b8d073e221ec75d3f5b89e17.tar.xz |
usb: hub: port: add sysfs entry to switch port power
In some cases the port of an hub needs to be disabled or switched off
and on again. E.g. when the connected device needs to be re-enumerated.
Or it needs to be explicitly disabled while the rest of the usb tree
stays working.
For this purpose this patch adds an sysfs switch to enable/disable the
port on any hub. In the case the hub is supporting power switching, the
power line will be disabled to the connected device.
When the port gets disabled, the associated device gets disconnected and
removed from the logical usb tree. No further device will be enumerated
on that port until the port gets enabled again.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/hub.c | 39 | ||||
-rw-r--r-- | drivers/usb/core/hub.h | 3 | ||||
-rw-r--r-- | drivers/usb/core/port.c | 83 |
3 files changed, 106 insertions, 19 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 68e9121c1878..ba406b8d688d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -613,7 +613,7 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, return ret; } -static int hub_port_status(struct usb_hub *hub, int port1, +int usb_hub_port_status(struct usb_hub *hub, int port1, u16 *status, u16 *change) { return hub_ext_port_status(hub, port1, HUB_PORT_STATUS, @@ -1126,7 +1126,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) u16 portstatus, portchange; portstatus = portchange = 0; - status = hub_port_status(hub, port1, &portstatus, &portchange); + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); if (status) goto abort; @@ -2855,7 +2855,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, &portstatus, &portchange, &ext_portstatus); else - ret = hub_port_status(hub, port1, &portstatus, + ret = usb_hub_port_status(hub, port1, &portstatus, &portchange); if (ret < 0) return ret; @@ -2956,7 +2956,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1, * If the caller hasn't explicitly requested a warm reset, * double check and see if one is needed. */ - if (hub_port_status(hub, port1, &portstatus, &portchange) == 0) + if (usb_hub_port_status(hub, port1, &portstatus, + &portchange) == 0) if (hub_port_warm_reset_required(hub, port1, portstatus)) warm = true; @@ -3008,7 +3009,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, * If a USB 3.0 device migrates from reset to an error * state, re-issue the warm reset. */ - if (hub_port_status(hub, port1, + if (usb_hub_port_status(hub, port1, &portstatus, &portchange) < 0) goto done; @@ -3074,7 +3075,7 @@ done: } /* Check if a port is power on */ -static int port_is_power_on(struct usb_hub *hub, unsigned portstatus) +int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus) { int ret = 0; @@ -3140,13 +3141,13 @@ static int check_port_resume_type(struct usb_device *udev, } /* Is the device still present? */ else if (status || port_is_suspended(hub, portstatus) || - !port_is_power_on(hub, portstatus)) { + !usb_port_is_power_on(hub, portstatus)) { if (status >= 0) status = -ENODEV; } else if (!(portstatus & USB_PORT_STAT_CONNECTION)) { if (retries--) { usleep_range(200, 300); - status = hub_port_status(hub, port1, &portstatus, + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); goto retry; } @@ -3409,7 +3410,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) u16 portstatus, portchange; portstatus = portchange = 0; - ret = hub_port_status(hub, port1, &portstatus, + ret = usb_hub_port_status(hub, port1, &portstatus, &portchange); dev_dbg(&port_dev->dev, @@ -3587,13 +3588,13 @@ static int wait_for_connected(struct usb_device *udev, while (delay_ms < 2000) { if (status || *portstatus & USB_PORT_STAT_CONNECTION) break; - if (!port_is_power_on(hub, *portstatus)) { + if (!usb_port_is_power_on(hub, *portstatus)) { status = -ENODEV; break; } msleep(20); delay_ms += 20; - status = hub_port_status(hub, port1, portstatus, portchange); + status = usb_hub_port_status(hub, port1, portstatus, portchange); } dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms); return status; @@ -3653,7 +3654,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) usb_lock_port(port_dev); /* Skip the initial Clear-Suspend step for a remote wakeup */ - status = hub_port_status(hub, port1, &portstatus, &portchange); + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); if (status == 0 && !port_is_suspended(hub, portstatus)) { if (portchange & USB_PORT_STAT_C_SUSPEND) pm_wakeup_event(&udev->dev, 0); @@ -3678,7 +3679,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) * stop resume signaling. Then finish the resume * sequence. */ - status = hub_port_status(hub, port1, &portstatus, &portchange); + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); } SuspendCleared: @@ -3791,7 +3792,7 @@ static int check_ports_changed(struct usb_hub *hub) u16 portstatus, portchange; int status; - status = hub_port_status(hub, port1, &portstatus, &portchange); + status = usb_hub_port_status(hub, port1, &portstatus, &portchange); if (!status && portchange) return 1; } @@ -4554,7 +4555,7 @@ int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected) struct usb_port *port_dev = hub->ports[port1 - 1]; for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); + ret = usb_hub_port_status(hub, port1, &portstatus, &portchange); if (ret < 0) return ret; @@ -5240,7 +5241,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, * but only if the port isn't owned by someone else. */ if (hub_is_port_power_switchable(hub) - && !port_is_power_on(hub, portstatus) + && !usb_port_is_power_on(hub, portstatus) && !port_dev->port_owner) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); @@ -5557,7 +5558,7 @@ static void port_event(struct usb_hub *hub, int port1) clear_bit(port1, hub->event_bits); clear_bit(port1, hub->wakeup_bits); - if (hub_port_status(hub, port1, &portstatus, &portchange) < 0) + if (usb_hub_port_status(hub, port1, &portstatus, &portchange) < 0) return; if (portchange & USB_PORT_STAT_C_CONNECTION) { @@ -5594,7 +5595,7 @@ static void port_event(struct usb_hub *hub, int port1) USB_PORT_FEAT_C_OVER_CURRENT); msleep(100); /* Cool down */ hub_power_on(hub, true); - hub_port_status(hub, port1, &status, &unused); + usb_hub_port_status(hub, port1, &status, &unused); if (status & USB_PORT_STAT_OVERCURRENT) dev_err(&port_dev->dev, "over-current condition\n"); } @@ -5638,7 +5639,7 @@ static void port_event(struct usb_hub *hub, int port1) u16 unused; msleep(20); - hub_port_status(hub, port1, &portstatus, &unused); + usb_hub_port_status(hub, port1, &portstatus, &unused); dev_dbg(&port_dev->dev, "Wait for inactive link disconnect detect\n"); continue; } else if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 22ea1f4f2d66..3fcb38099ce3 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -121,6 +121,9 @@ extern int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected); extern int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature); +extern int usb_hub_port_status(struct usb_hub *hub, int port1, + u16 *status, u16 *change); +extern int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus); static inline bool hub_is_port_power_switchable(struct usb_hub *hub) { diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index d5bc36ca5b1f..38c1a4f4fdea 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -17,6 +17,88 @@ static int usb_port_block_power_off; static const struct attribute_group *port_dev_group[]; +static ssize_t disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_interface *intf = to_usb_interface(hub->intfdev); + int port1 = port_dev->portnum; + u16 portstatus, unused; + bool disabled; + int rc; + + rc = usb_autopm_get_interface(intf); + if (rc < 0) + return rc; + + usb_lock_device(hdev); + if (hub->disconnected) { + rc = -ENODEV; + goto out_hdev_lock; + } + + usb_hub_port_status(hub, port1, &portstatus, &unused); + disabled = !usb_port_is_power_on(hub, portstatus); + +out_hdev_lock: + usb_unlock_device(hdev); + usb_autopm_put_interface(intf); + + if (rc) + return rc; + + return sysfs_emit(buf, "%s\n", disabled ? "1" : "0"); +} + +static ssize_t disable_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *hdev = to_usb_device(dev->parent->parent); + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_interface *intf = to_usb_interface(hub->intfdev); + int port1 = port_dev->portnum; + bool disabled; + int rc; + + rc = strtobool(buf, &disabled); + if (rc) + return rc; + + rc = usb_autopm_get_interface(intf); + if (rc < 0) + return rc; + + usb_lock_device(hdev); + if (hub->disconnected) { + rc = -ENODEV; + goto out_hdev_lock; + } + + if (disabled && port_dev->child) + usb_disconnect(&port_dev->child); + + rc = usb_hub_set_port_power(hdev, hub, port1, !disabled); + + if (disabled) { + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + if (!port_dev->is_superspeed) + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + } + + if (!rc) + rc = count; + +out_hdev_lock: + usb_unlock_device(hdev); + usb_autopm_put_interface(intf); + + return rc; +} +static DEVICE_ATTR_RW(disable); + static ssize_t location_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -153,6 +235,7 @@ static struct attribute *port_dev_attrs[] = { &dev_attr_location.attr, &dev_attr_quirks.attr, &dev_attr_over_current_count.attr, + &dev_attr_disable.attr, NULL, }; |